summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2025-01-16Merge tag 'dt-cleanup-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM DTS for v6.14 1. Marvell: Use un-deprecated hp-det-gpios (no ABI impact expected). 2. SoCFPGA: Drop spidev devices which are not properly described in DTS, but are using some other compatibles. This was part of wider tree effort to fix such incorrect hardware descriptions. Important: Dropping this device node will have user-visible impact: spidev device will not register. * tag 'dt-cleanup-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: ARM: dts: socfpga: remove non-existent DAC from CycloneV devkit ARM: dts: marvell: mmp2-olpc-xo-1-75: Switch to {hp,mic}-det-gpios Link: https://lore.kernel.org/r/20241231132847.135814-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15Merge tag 'samsung-dt-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM changes for v6.14 Few fixes and improvements for sound on Galaxy Tab3 (Exynos4212). * tag 'samsung-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: samsung: exynos4212-tab3: Drop interrupt from WM1811 codec ARM: dts: samsung: exynos4212-tab3: Add MCLK2 clock to WM1811 codec config ARM: dts: samsung: exynos4212-tab3: Fix headset mic, add jack detection Link: https://lore.kernel.org/r/20241231131742.134329-3-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15Merge tag 'at91-defconfig-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/defconfig Microchip AT91 defconfig updates for v6.14 This update includes: - support for the SAMA7D65 SoC * tag 'at91-defconfig-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: configs: at91: sama7: add new SoC config Link: https://lore.kernel.org/r/20250107081424.758980-1-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15Merge tag 'imx-defconfig-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig i.MX defconfig change for 6.14: - Enable JC42 temperature sensor driver support in imx_v6_v7_defconfig (Alexander Stein) - Enable ITE IT6263 LVDS to HDMI converter driver support in arm64 defconfig (Liu Ying) * tag 'imx-defconfig-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: Enable ITE IT6263 driver ARM: imx_v6_v7_defconfig: enable JC42 for TQMa7x Link: https://lore.kernel.org/r/20250105095139.714590-5-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15ARM: configs: stm32: Remove useless flags in STM32 defconfigPatrice Chotard
As stm32_defconfig is dedicated to STM32 MCUs, disable CONFIG_COMMON_CLK_STM32MP flag which is only used by STM32 MPUs. Disable CONFIG_SUSPEND, CONFIG_ADVISE_SYSCALLS, CONFIG_IO_URING CONFIG_POSIX_TIMERS, CONFIG_GCC_PLUGINS, it will reduce the kernel image size for these platforms which embed a low amount of memory. Tested on STM32F746-DISCO board which embeds 8MB of memory. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20241220125506.3157268-5-patrice.chotard@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15ARM: configs: stm32: Remove CRYPTO in STM32 defconfigPatrice Chotard
Running make savedefconfig highlights some useless flags. Since 1c92d4a0edcf ("ARM: configs: stm32: Enable MMC_ARMMMCI and EXT3_FS support") CRYPTO is selected by EXT3_FS, so CRYPTO can be removed in stm32_defconfig. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20241220125506.3157268-4-patrice.chotard@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15ARM: configs: stm32: Clean STM32 defconfigPatrice Chotard
Running make savedefconfig highlights some useless flags. Since 54a48aa3d558 ("Compiler Attributes: remove CONFIG_ENABLE_MUST_CHECK") flag ENABLE_MUST_CHECK has been removed. Since 35260cf54522 ("Kconfig.debug: fix SCHED_DEBUG dependency") SCHED_DEBUG depends on DEBUG_KERNEL and PROC_FS. As PROC_FS is not set, SCHED_DEBUG reference can be removed. Since 78011042684d ("scsi: bsg: Move bsg_scsi_ops to drivers/scsi/") BLK_DEV_BSG depends on SCSI. As SCSI is not set, BLK_DEV_BSG reference can be removed. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20241220125506.3157268-3-patrice.chotard@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15ARM: configs: stm32: Remove FLASH_MEM_BASE and FLASH_SIZE in STM32 defconfigPatrice Chotard
Running make savedefconfig highlights some useless flags. Remove FLASH_MEM_BASE and FLASH_SIZE as these 2 flags are only used by CPU_ARM740T,CPU_ARM940T and CPU_ARM946E which is not the case here for CPU_V7M. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20241220125506.3157268-2-patrice.chotard@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-14ARM: 9433/2: implement cacheinfo supportDmitry Baryshkov
On ARMv7 / v7m machines read CTR and CLIDR registers to provide information regarding the cache topology. Earlier machines should describe full cache topology in the device tree. Note, this follows the ARM64 cacheinfo support and provides only minimal support required to bootstrap cache info. All useful properties should be decribed in Device Tree. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2025-01-14ARM: 9432/2: add CLIDR accessor functionsDmitry Baryshkov
Add functions to read the CLIDR, Cache Level ID Register. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2025-01-14ARM: 9438/1: assembler: Drop obsolete VFP accessor fallbackArd Biesheuvel
Now that the minimum supported binutils version is 2.25, we no longer need a workaround for binutils older than 2.24 for accessing VFP control registers from assembler. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2025-01-14ARM: 9437/1: vfp: Fix typographical errors in vfpmodule.cluoyifan
Correct the misspellings of "noftify" (should be "notify") and "swtich" (should be "switch"). Link: https://lore.kernel.org/r/20241114011939.296230-1-luoyifan@cmss.chinamobile.com Signed-off-by: Luo Yifan <luoyifan@cmss.chinamobile.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2025-01-13Merge 6.13-rc7 into driver-core-nextGreg Kroah-Hartman
We need the debugfs / driver-core fixes in here as well for testing and to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-12arm: pxa: convert timeouts to use secs_to_jiffies()Easwar Hariharan
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced secs_to_jiffies(). As the value here is a multiple of 1000, use secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication. This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with the following Coccinelle rules: @@ constant C; @@ - msecs_to_jiffies(C * 1000) + secs_to_jiffies(C) @@ constant C; @@ - msecs_to_jiffies(C * MSEC_PER_SEC) + secs_to_jiffies(C) Link: https://lkml.kernel.org/r/20241210-converge-secs-to-jiffies-v3-3-ddfefd7e9f2a@linux.microsoft.com Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andrew Lunn <andrew+netdev@lunn.ch> Cc: Anna-Maria Behnsen <anna-maria@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Daniel Mack <daniel@zonque.org> Cc: David Airlie <airlied@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Fainelli <florian.fainelli@broadcom.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: James Smart <james.smart@broadcom.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Jeff Johnson <jjohnson@kernel.org> Cc: Jeff Johnson <quic_jjohnson@quicinc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jeroen de Borst <jeroendb@google.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Jozsef Kadlecsik <kadlec@netfilter.org> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kalle Valo <kvalo@kernel.org> Cc: Louis Peens <louis.peens@corigine.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Naveen N Rao <naveen@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Nicolas Palix <nicolas.palix@imag.fr> Cc: Oded Gabbay <ogabbay@kernel.org> Cc: Ofir Bitton <obitton@habana.ai> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Praveen Kaligineedi <pkaligineedi@google.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Scott Branden <sbranden@broadcom.com> Cc: Shailend Chand <shailend@google.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: Simon Horman <horms@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Takashi Iwai <tiwai@suse.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Xiubo Li <xiubli@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-10ARM: riscpc: make ecard_bus_type constantKunwu Chan
Since commit d492cc2573a0 ("driver core: device.h: make struct bus_type a const *"), the driver core can properly handle constant struct bus_type, move the ecard_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240823081444.150976-1-kunwu.chan@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-09Merge tag 'imx-fixes-6.13' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.13: - Add fallback for i.MX8QM ESAI compatible to fix a dt-schema warning caused by bindings update - Fix uSDHC1 clock for i.MX RT1050 - Enable SND_SOC_SPDIF in imx_v6_v7_defconfig to fix a regression caused by an i.MX6 SPDIF sound card change in DT - Fix address length of i.MX95 netcmix_blk_ctrl * tag 'imx-fixes-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imxrt1050: Fix clocks for mmc ARM: imx_v6_v7_defconfig: enable SND_SOC_SPDIF arm64: dts: imx95: correct the address length of netcmix_blk_ctrl arm64: dts: imx8-ss-audio: add fallback compatible string fsl,imx6ull-esai for esai Link: https://lore.kernel.org/r/Z3Jf9zbv/xH3YzuB@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-08ARM: dts: mediatek: mt7623: fix IR nodenameRafał Miłecki
Fix following validation error: arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dtb: cir@10013000: $nodename:0: 'cir@10013000' does not match '^ir(-receiver)?(@[a-f0-9]+)?$' from schema $id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml# Fixes: 91044f38dae7 ("arm: dts: mt7623: add ir nodes to the mt7623.dtsi file") Cc: linux-media@vger.kernel.org Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20240617094634.23173-1-zajec5@gmail.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2025-01-08ARM: dts: aspeed: yosemite4: adjust secondary flash namePatrick Williams
Meta (Facebook) has a preference for all of our secondary flash chips to be labelled "alt-bmc" for consistency of userspace tools deal with updates. Bletchley, Harma, Minerva, and Catalina all follow this convention but for some reason Yosemite4 is different. Adjust the label in the dts to match the other platforms. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Link: https://patch.msgid.link/20250107162726.232402-1-patrick@stwcx.xyz Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-01-07ARM: dts: ti/omap: omap3-gta04: use proper touchscreen propertiesAndreas Kemnade
Specify the dimensions of the touchscreen propertly so that no userspace configuration is needed for it. Tested with x11 and weston on Debian bookworm. What is in now is some debris from earlier tries to handle scaling in kernel: https://lore.kernel.org/linux-input/cover.1482936802.git.hns@goldelico.com/ Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20241205204413.2466775-3-akemnade@kernel.org Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2025-01-07ARM: dts: ti: am437x-l4: remove autoidle for UARTJudith Mendez
According to the TRM [0] in 21.5.1.42 UART_SYSC Register, the autoidle bit should not be set for UART, so remove the appropriate SYSC_OMAP2_AUTOIDLE flag. [0] https://www.ti.com/lit/ug/spruhl7i/spruhl7i.pdf Signed-off-by: Judith Mendez <jm@ti.com> Reviewed-by: Sukrut Bellary <sbellary@baylibre.com> Link: https://lore.kernel.org/r/20241220223523.2125278-1-jm@ti.com Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2025-01-07ARM: dts: ti/omap: gta04: fix pm issues caused by spi moduleAndreas Kemnade
Despite CM_IDLEST1_CORE and CM_FCLKEN1_CORE behaving normal, disabling SPI leads to messages like when suspending: Powerdomain (core_pwrdm) didn't enter target state 0 and according to /sys/kernel/debug/pm_debug/count off state is not entered. That was not connected to SPI during the discussion of disabling SPI. See: https://lore.kernel.org/linux-omap/20230122100852.32ae082c@aktux/ The reason is that SPI is per default in slave mode. Linux driver will turn it to master per default. It slave mode, the powerdomain seems to be kept active if active chip select input is sensed. Fix that by explicitly disabling the SPI3 pins which used to be muxed by the bootloader since they are available on an optionally fitted header which would require dtb overlays anyways. Fixes: a622310f7f01 ("ARM: dts: gta04: fix excess dma channel usage") CC: stable@vger.kernel.org Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20241204174152.2360431-1-andreas@kemnade.info Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2025-01-07ARM: dts: microchip: add support for sama7d65_curiosity boardRomain Sioen
Add device tree support for the SAMA7D65 Curiosity board. Update the Makefile to include the new device tree file. uart6 is related to flexcom6, hence not sorted in alphabetical order. Signed-off-by: Romain Sioen <romain.sioen@microchip.com> Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/20250107160850.120537-6-Ryan.Wanner@microchip.com [claudiu.beznea: moved chosen node after alias for aphanumerically sortage, added a space in front of <PIN_PD19__FLEXCOM6_IO1> for alignment] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-01-07ARM: dts: microchip: add sama7d65 SoC DTRyan Wanner
Add Device Tree for sama7d65 SoC. Co-developed-by: Dharma Balasubiramani <dharma.b@microchip.com> Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com> Co-developed-by: Romain Sioen <romain.sioen@microchip.com> Signed-off-by: Romain Sioen <romain.sioen@microchip.com> Co-developed-by: Varshini Rajendran <varshini.rajendran@microchip.com> Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/20250107160850.120537-5-Ryan.Wanner@microchip.com [claudiu.beznea: dropped comma typo from copyright, dropped space in front of slow_xtal node, dropped empty space after slow_xtal node] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-01-07ARM: dts: aspeed: system1: Use crps PSU driverNinad Palsule
The system1 uses Intel common redundant (crps185) power supplies so move to correct new crps driver. Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://patch.msgid.link/20241217173537.192331-5-ninad@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-01-06ARM: dts: qcom: sdx55: Disable USB U1/U2 entryPrashanth K
Disable U1 and U2 power-saving states to improve stability of USB. These low-power link states, designed to reduce power consumption during idle periods, can cause issues in latency-sensitive or high throughput use cases. Over the years, some of the issues seen are as follows: 1. In device mode of operation, when UVC is active, enabling U1/U2 is sometimes causing packets drops due to delay in entry/exit of intermittent these low power states. These packet drops are often reflected as missed isochronous transfers, as the controller wasn't able to send packet in that microframe interval and hence glitches are seen on the final transmitted video output. 2. On older targets like SM8150/SM8250/SM8350, there have been throughput issues seen during tethering use cases. 3. On targets like SDX75, intermittent disconnects were observed with certain cables due to impedence variations. Disabling these intermittent power states enhances device stability without affecting power usage. Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20241231080932.3149448-3-quic_prashk@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-06ARM: dts: qcom: sdx65: Disable USB U1/U2 entryPrashanth K
Disable U1 and U2 power-saving states to improve stability of USB. These low-power link states, designed to reduce power consumption during idle periods, can cause issues in latency-sensitive or high throughput use cases. Over the years, some of the issues seen are as follows: 1. In device mode of operation, when UVC is active, enabling U1/U2 is sometimes causing packets drops due to delay in entry/exit of intermittent these low power states. These packet drops are often reflected as missed isochronous transfers, as the controller wasn't able to send packet in that microframe interval and hence glitches are seen on the final transmitted video output. 2. On older targets like SM8150/SM8250/SM8350, there have been throughput issues seen during tethering use cases. 3. On targets like SDX75, intermittent disconnects were observed with certain cables due to impedence variations. Disabling these intermittent power states enhances device stability without affecting power usage. Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20241231080932.3149448-2-quic_prashk@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-06ARM: omap1: Fix up the Retu IRQ on Nokia 770Aaro Koskinen
The Retu IRQ is off by one, as a result the power button does not work. Fix it. Fixes: 084b6f216778 ("ARM: omap1: Fix up the Nokia 770 board device IRQs") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/Z3UxH_fOzuftjnuX@darkstar.musicnaut.iki.fi Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2025-01-06ARM: omap2plus_defconfig: enable charger of TWL603XAndreas Kemnade
Enable the newly-added charger of TWL603X in the defconfig since it is used by the Epson Moverio BT200. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20241229144459.9742-1-andreas@kemnade.info Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2025-01-06ARM: dts: st: enable the MALI gpu on the stih410-b2260Alain Volmat
Enable the GPU on the stih410-b2260 board. Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2025-01-06ARM: dts: st: add node for the MALI gpu on stih410.dtsiAlain Volmat
Add the entry for the GPU (Mali400) on the stih410.dtsi Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2025-01-04crypto: vmac - remove unused VMAC algorithmEric Biggers
Remove the vmac64 template, as it has no known users. It also continues to have longstanding bugs such as alignment violations (see https://lore.kernel.org/r/20241226134847.6690-1-evepolonium@gmail.com/). This code was added in 2009 by commit f1939f7c5645 ("crypto: vmac - New hash algorithm for intel_txt support"). Based on the mention of intel_txt support in the commit title, it seems it was added as a prerequisite for the contemporaneous patch "intel_txt: add s3 userspace memory integrity verification" (https://lore.kernel.org/r/4ABF2B50.6070106@intel.com/). In the design proposed by that patch, when an Intel Trusted Execution Technology (TXT) enabled system resumed from suspend, the "tboot" trusted executable launched the Linux kernel without verifying userspace memory, and then the Linux kernel used VMAC to verify userspace memory. However, that patch was never merged, as reviewers had objected to the design. It was later reworked into commit 4bd96a7a8185 ("x86, tboot: Add support for S3 memory integrity protection") which made tboot verify the memory instead. Thus the VMAC support in Linux was never used. No in-tree user has appeared since then, other than potentially the usual components that allow specifying arbitrary hash algorithms by name, namely AF_ALG and dm-integrity. However there are no indications that VMAC is being used with these components. Debian Code Search and web searches for "vmac64" (the actual algorithm name) do not return any results other than the kernel itself, suggesting that it does not appear in any other code or documentation. Explicitly grepping the source code of the usual suspects (libell, iwd, cryptsetup) finds no matches either. Before 2018, the vmac code was also completely broken due to using a hardcoded nonce and the wrong endianness for the MAC. It was then fixed by commit ed331adab35b ("crypto: vmac - add nonced version with big endian digest") and commit 0917b873127c ("crypto: vmac - remove insecure version with hardcoded nonce"). These were intentionally breaking changes that changed all the computed MAC values as well as the algorithm name ("vmac" to "vmac64"). No complaints were ever received about these breaking changes, strongly suggesting the absence of users. The reason I had put some effort into fixing this code in 2018 is because it was used by an out-of-tree driver. But if it is still needed in that particular out-of-tree driver, the code can be carried in that driver instead. There is no need to carry it upstream. Cc: Atharva Tiwari <evepolonium@gmail.com> Cc: Shane Wang <shane.wang@intel.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2025-01-03Merge tag 'pinctrl-v6.13-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - A small Kconfig fixup for the i.MX. In principle this could come in from the SoC tree but the bug was introduced from the pin control tree so let's fix it from here. - Fix a sleep in atomic context in the MCP23xxx GPIO expander by disabling the regmap locking and using explicit mutex locks. * tag 'pinctrl-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: mcp23s08: Fix sleeping in atomic context due to regmap locking ARM: imx: Re-introduce the PINCTRL selection
2025-01-02ARM: dts: microchip: sam9x7: Add address/size to spi-controller nodesMihai Sain
Since these properties are common for all spi subnodes, add them to SoC dtsi instead of board dts. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20241218080333.2225-3-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-01-02ARM: dts: microchip: sam9x60: Add address/size to spi-controller nodesMihai Sain
Since these properties are common for all spi subnodes, add them to SoC dtsi instead of board dts. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20241218080333.2225-2-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-01-02ARM: dts: microchip: sama5d27_wlsom1_ek: Add no-1-8-v property to sdmmc0 nodeCristian Birsan
Add no-1-8-v property to sdmmc0 node to keep VDDSDMMC power rail at 3.3V. This property will stop the LDO regulator from switching to 1.8V when the MMC core detects an UHS SD Card. VDDSDMMC power rail is used by all the SDMMC interface pins in GPIO mode (PA0 - PA13). On this board, PA10 is used as GPIO to enable the power switch controlling USB Vbus for the USB Host. The change is needed to fix the PA10 voltage level to 3.3V instead of 1.8V. Fixes: 5d4c3cfb63fe ("ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek") Suggested-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Tested-by: Andrei Simion <andrei.simion@microchip.com> Link: https://lore.kernel.org/r/20241119160107.598411-3-cristian.birsan@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-01-02ARM: dts: microchip: sama5d29_curiosity: Add no-1-8-v property to sdmmc0 nodeCristian Birsan
Add no-1-8-v property to sdmmc0 node to keep VDDSDMMC power rail at 3.3V. This property will stop the LDO regulator from switching to 1.8V when the MMC core detects an UHS SD Card. VDDSDMMC power rail is used by all the SDMMC interface pins in GPIO mode (PA0 - PA13). On this board, PA6 is used as GPIO to enable the power switch controlling USB Vbus for the USB Host. The change is needed to fix the PA6 voltage level to 3.3V instead of 1.8V. Fixes: d85c4229e925 ("ARM: dts: at91: sama5d29_curiosity: Add device tree for sama5d29_curiosity board") Suggested-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Tested-by: Andrei Simion <andrei.simion@microchip.com> Link: https://lore.kernel.org/r/20241119160107.598411-2-cristian.birsan@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-01-02ARM: dts: at91: Add sama7d65 pinmuxRyan Wanner
Add sama7d65 pin descriptions. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/a8f880b89cd4470526a2955a0b6aaaaa24ba65b8.1733505542.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-01-02ARM: at91: add new SoC sama7d65Ryan Wanner
Add new SoC from at91 family: sama7d65 Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/aafa6115adc52d30bc83206f8fab5964d4dd7fb7.1734723585.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-12-30ARM: dts: amlogic: meson: remove size and address cells from USB nodesMartin Blumenstingl
The only board that actually requires these properties is meson8b-odroidc1.dts but that already sets it on it's own. Drop these properties from meson.dtsi because otherwise they can cause dtc warnings: /soc/usb@c9040000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241226220352.965505-1-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-12-30ARM: dts: imx: Use the correct mdio patternFabio Estevam
mdio-gpio is not a valid pattern according to mdio-gpio.yaml. Use the generic 'mdio' name to fix the following dt-schema warnings: 'mdio-gpio' does not match '^mdio(-(bus|external))?(@.+|-([0-9]+))?$' Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-12-30ARM: dts: imx6qdl-sabresd: add dr_mode to usbotgHui Wang
Currently there are 3 type of boards (imx6q|imx6qp|imx6dl-sabresd) based on imx6qdl-sabresd.dtsi, they all do not set the dr_mode for usbotg device node. The chipidea usb driver will configure it to otg mode by default if the dr_mode is not set, but some testcases need to parse the dr_mode from DT and decide the follow-up test strategy, here set the dr_mode to otg explicitly for these 3 imx6qdl-sabresd based boards. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-12-30ARM: dts: imx6qdl-apalis: Change to "adi,force-bt656-4"Fabio Estevam
According to adv7180.yaml, the correct property name is "adi,force-bt656-4". Update it accordingly to fix several dt-schema warnings: adv7280@21: 'adv,force-bt656-4' does not match any of the regexes: ... imx6qdl-apalis.dtsi is the only in-tree kernel user of this property. BSD does have a adv7180 driver, so should not be impacted. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-12-30ARM: dts: imx6sx: add phy-3p0-supply to usb physStefan Kerkmann
The integrated usb phys are supplied by the 3p0 regulator, which has a voltage range of 2.625V to 3.4V. Thus the min and max values are corrected and the regulator added as a proper supply for the usb phys. This fixes the following warnings during the probe of the mxs_phy driver: mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator The regulator handling was introduced by commit `966d73152078 (usb: phy: mxs: enable regulator phy-3p0 to improve signal qualilty, 2024-07-26)`. Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-12-30ARM: dts: imx6sl: add phy-3p0-supply to usb physStefan Kerkmann
The integrated usb phys are supplied by the 3p0 regulator, which has a voltage range of 2.625V to 3.4V. Thus the min and max values are corrected and the regulator added as a proper supply for the usb phys. This fixes the following warnings during the probe of the mxs_phy driver: mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator The 3p0 regulator handling was introduced by commit 966d73152078 ("usb: phy: mxs: enable regulator phy-3p0 to improve signal qualilty")`. Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-12-30ARM: dts: imx6qdl: add phy-3p0-supply to usb physStefan Kerkmann
The integrated usb phys are supplied by the 3p0 regulator, which has a voltage range of 2.625V to 3.4V. Thus the min and max values are corrected and the regulator added as a proper supply for the usb phys. This fixes the following warnings during the probe of the mxs_phy driver: mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator The 3p0 regulator handling was introduced by commit 966d73152078 ("usb: phy: mxs: enable regulator phy-3p0 to improve signal qualilty")`. Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-12-29ARM: dts: samsung: exynos4212-tab3: Drop interrupt from WM1811 codecArtur Weber
This was initially copied from the Midas DTSI, but there is no proof that the same interrupt is also used on the Tab 3. The pin listed as the interrupt here is GPIO_HDMI_CEC on the Midas, but for the Tab 3 it is the headset button GPIO - GPIO_EAR_SEND_END. Drop the interrupt, since there is no proof that it is used. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/r/20240816-midas-audio-tab3-v2-5-48ee7f2293b3@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-12-29ARM: dts: samsung: exynos4212-tab3: Add MCLK2 clock to WM1811 codec configArtur Weber
In the schematics, the MCLK2 pin is shown as connected to CODEC_CLK32K, which is derived from the same 32KHZ_PMIC clock as Bluetooth/WiFi and GPS clocks. 32KHZ_PMIC is connected to the BTCLK pin, represented in mainline as S2MPS11_CLK_BT. Add the MCLK2 clock to the WM1811 codec clock property to properly describe the hardware. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/r/20240816-midas-audio-tab3-v2-4-48ee7f2293b3@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-12-29ARM: dts: samsung: exynos4212-tab3: Fix headset mic, add jack detectionArtur Weber
Set up headset mic bias regulator and add the necessary properties to the samsung,midas-audio node to allow for headset jack detection. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/r/20240816-midas-audio-tab3-v2-3-48ee7f2293b3@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-12-29ARM: dts: socfpga: remove non-existent DAC from CycloneV devkitConor Dooley
There is no Rohm DAC on the CycloneV devkit according to the online documentation for it that I could find, and it definitely does not have a dh2228fv as this device does not actually exist! Remove the DAC node from the devicetree as it is not acceptable to pretend to have a device on a board in order to bind the spidev driver in Linux. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240717-partake-antivirus-3347e415fb7d@spud Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-12-26ARM: dts: qcom: sdx55: Add CPU PCIe EP interconnect pathKrishna chaitanya chundru
Add cpu-pcie interconnect path for PCIe EP to sdx55 platform. Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1689751218-24492-4-git-send-email-quic_krichai@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-15 16:32:36 +0000