summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2024-12-13ARM: dts: aspeed: catalina: update NIC1 fru addressPotin Lai
Update NIC1 FRU EEPROM address to 0x52 based on EVT changes. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20240926-catalina-evt-dvt-system-modify-v2-3-a861daeba059@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: catalina: enable mac2Potin Lai
Enable mac2 in advance for DVT HW schematic. - EVT system: - eth0 (mac2): no NCSI - eth1 (mac3): with NCSI - DVT system: - eth0 (mac2): with NCSI - eth1 (mac3): with NCSI Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20240926-catalina-evt-dvt-system-modify-v2-2-a861daeba059@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: catalina: move hdd board i2c mux bus to i2c5Potin Lai
Due to EVT hardware changes, move HDD board i2c mux bus from i2c30 to i2c5. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Link: https://patch.msgid.link/20240926-catalina-evt-dvt-system-modify-v2-1-a861daeba059@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: revise flash layout to 128MBRicky CX Wu
Revise flash layout to 128MB since we are using 1GB flash memory in our project. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240924094430.272074-3-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Revise quad mode to dual modeRicky CX Wu
Revise quad mode to dual mode to keep the write protect feature for the SPI flash because the WP pin is the same pin with IO2 pin in quad mode. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240924094430.272074-2-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: minerva: add fru device for other bladesYang Chen
The Minerva platform has 16 compute blades and 6 network blades, each with an EEPROM that can be operated by the CMM. This commit adds support for each FRU. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Link: https://patch.msgid.link/20240924140215.2484170-4-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: minerva: change the i2c mux number for FCBsYang Chen
Change the i2c mux channel to match the correct fan board location. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Link: https://patch.msgid.link/20240924140215.2484170-3-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: minerva: Revise the SGPIO line nameYang Chen
Modify the SGPIO line names sent from the CMM CPLD in the DVT version and map the blade and FCB numbers to match the silkscreen labels on the rack as follows: 1. Change the compute blade numbering from 0-15 to 1-16. 2. Change the network blade numbering from 0-5 to 1-6. 3. Update the FCB numbering from TOP0/1, MID0/1, and BOT0/1 to FCB1-6. 4. Revise the SGPIO line name for DVT changed. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Link: https://patch.msgid.link/20240924140215.2484170-2-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Enable spi-gpio setting for TPMRicky CX Wu
Enable spi-gpio setting for TPM device in yosemite4. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240920080227.711691-1-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode on Spider BoardRicky CX Wu
Revise adc128d818 adc mode on Spider Board according to schematic. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Link: https://patch.msgid.link/20240920085007.1076174-1-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: catalina: add i2c-mux-idle-disconnect to all muxPotin Lai
Add the `i2c-mux-idle-disconnect` property to all i2c-mux nodes to ensure proper behavior when switching between multiple I2C buses. This avoids potential confusion caused by device addresses appearing on multiple buses when they are not actively selected. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20240920-catalina-i2c-mux-fix-2-v1-1-66cce7c54188@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Add gpio pca9506 for CPLD IOERicky CX Wu
We use CPLD to emulate gpio pca9506 I/O expander on each server boards. Therefore, add pca9506 to probe driver for the CPLD I/O expander. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240910054751.2943217-3-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Revise to use adm1281 on Medusa boardRicky CX Wu
Revise to use adm1281 for HSC according to the hardware design change. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240910054751.2943217-2-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: Enable PECI and LPC snoop for IBM System1Manojkiran Eda
This patch enables the PECI interface and configures the LPC Snoop for ports 0x80 and 0x81 in the ASPEED BMC for IBM System1. Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com> Link: https://patch.msgid.link/20240918-dts-aspeed-system1-peci-snoop-v2-1-2d4d17403670@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555Ricky CX Wu
Enable interrupt setting and add GPIO line name for pca9555 for the I/O expanders on Medusa board. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240918101742.1346788-1-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: Fix Rainier and Blueridge GPIO LED namesEddie James
Blueridge LED names to include the "led-" prefix as is proper. Rainier should match for ease of application design. In addition, the gpio line name ought to match. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://patch.msgid.link/20240917162100.1386130-1-eajames@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: mtmitchell: Add gpio line names for io expandersChanh Nguyen
Add below gpio line names to io expanders for more platform features. - ext-vref-sel - presence-hdd-bp5-n - presence-hdd-bp6-n - bmc-ocp0-en-n - bmc-ocp1-en-n - bmc-riser-en-n - gpi0, gpi1 Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://patch.msgid.link/20240905063521.319416-3-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: mtmitchell: Add I2C FAN controllersChanh Nguyen
Add the MAX31790 nodes as i2c fan controllers. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://patch.msgid.link/20240905063521.319416-2-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: Harma: revise sgpio line namePeter Yin
power-card-enable power-fault-n power-hsc-good power-chassis-good asic0-card-type-detection0-n asic0-card-type-detection1-n asic0-card-type-detection2-n presence-cmm uart-switch-button uart-switch-lsb uart-switch-msb reset-control-cmos-clear Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://patch.msgid.link/20240909080459.3457853-3-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: Harma: add rtc devicePeter Yin
Add "nxp,pcf8563" device and the slave address is 0x51. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://patch.msgid.link/20240909080459.3457853-2-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Enable adc15Ricky CX Wu
Enable Yosemite4 adc15 config for monitoring P3V_BAT_SCALED. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240910022236.1564291-1-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Enable watchdog2Ricky CX Wu
Enable watchdog2 setting for yosemite4 system. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Link: https://patch.msgid.link/20240910080951.3568594-1-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Change eeprom for Medusa BoardRicky CX Wu
Change eeprom on Medusa Board to AT24C128 according to hardware change. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240910084109.3585923-1-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Remove temperature sensors on Medusa BoardRicky CX Wu
Remove two temperature sensors on Medusa Board according to hardware change. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240910085701.3595248-1-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: Fix at24 EEPROM node namesRob Herring (Arm)
at24.yaml defines the node name for at24 EEPROMs as 'eeprom'. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240910215929.823913-1-robh@kernel.org Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-11kexec: Consolidate machine_kexec_mask_interrupts() implementationEliav Farber
Consolidate the machine_kexec_mask_interrupts implementation into a common function located in a new file: kernel/irq/kexec.c. This removes duplicate implementations from architecture-specific files in arch/arm, arch/arm64, arch/powerpc, and arch/riscv, reducing code duplication and improving maintainability. The new implementation retains architecture-specific behavior for CONFIG_GENERIC_IRQ_KEXEC_CLEAR_VM_FORWARD, which was previously implemented for ARM64. When enabled (currently for ARM64), it clears the active state of interrupts forwarded to virtual machines (VMs) before handling other interrupt masking operations. Signed-off-by: Eliav Farber <farbere@amazon.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241204142003.32859-2-farbere@amazon.com
2024-12-11ARM: dts: renesas: r7s72100: Add DMA support to RSPIGeert Uytterhoeven
Add DMA properties to the device nodes for Renesas Serial Peripheral Interfaces. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/dfafc16b840630f20e75292d419479294558e173.1732098491.git.geert+renesas@glider.be
2024-12-10ARM: shmobile: defconfig: Refresh for v6.13-rc1Geert Uytterhoeven
Refresh the defconfig for Renesas ARM systems: - Enable RZ DMA Controller support, as used on the Genmai and RSK+RZA1 development boards. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/b8727e642508433016290a998c880b54de2e208d.1733320866.git.geert+renesas@glider.be
2024-12-10ARM: dts: stm32: lxa-tac: Add support for generation 3 devicesLeonard Göhrs
Add support for the lxa-tac generation 3 board based on the STM32MP153c. Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-12-10ARM: dts: stm32: lxa-tac: move adc and gpio{e,g} to gen{1,2} boardsLeonard Göhrs
This is a preparation patch in order to add lxa-tac generation 3 board. As the gen3 board has a different adc and gpio{e,g} setups, move these from the stm32mp15xc-lxa-tac.dtsi to the gen{1,2}.dts files. Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-12-10ARM: dts: stm32: lxa-tac: adjust USB gadget fifo sizes for multi functionLeonard Göhrs
Allow providing the Ethernet and mass storage functions on the USB peripheral port at the same time. Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-12-10ARM: dts: stm32: lxa-tac: extend the alias tableLeonard Göhrs
Some of the userspace software and tests depend on the can/i2c/spi devices having the same name on every boot. This may not always be the case based on e.g. parallel probe order. Assign static device numbers to all can/i2c/spi devices. Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-12-10ARM: dts: stm32: lxa-tac: disable the real time clockLeonard Göhrs
The RTC was enabled under the false assumption that the SoM already contains a suitable 32.768 kHz crystal. It does however not contain such a crystal and since none is fitted externally to the SoM the RTC can not be used on the hardware. Reflect that in the devicetree. Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-12-10ARM: dts: stm32: Fix IPCC EXTI declaration on stm32mp151Arnaud Pouliquen
The GIC IRQ type used for IPCC RX should be IRQ_TYPE_LEVEL_HIGH. Replacing the interrupt with the EXTI event changes the type to the numeric value 1, meaning IRQ_TYPE_EDGE_RISING. The issue is that EXTI event 61 is a direct event.The IRQ type of direct events is not used by EXTI and is propagated to the parent IRQ controller of EXTI, the GIC. Align the IRQ type to the value expected by the GIC by replacing the second parameter "1" with IRQ_TYPE_LEVEL_HIGH. Fixes: 7d9802bb0e34 ("ARM: dts: stm32: remove the IPCC "wakeup" IRQ on stm32mp151") Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-12-09ARM: dts: stm32: Sort M24256E write-lockable page in DH STM32MP13xx DHCOR SoM DTMarek Vasut
Move the M24256E write-lockable page subnode after RTC subnode in DH STM32MP13xx DHCOR SoM DT to keep the list of nodes sorted by I2C address. No functional change. Fixes: 3f2e7d167307 ("ARM: dts: stm32: Describe M24256E write-lockable page in DH STM32MP13xx DHCOR SoM DT") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-12-09ARM: dts: stm32: Increase CPU core voltage on STM32MP13xx DHCOR SoMMarek Vasut
The STM32MP13xx DHCOR DHSBC is populated with STM32MP13xx part capable of 1 GHz operation, increase the CPU core voltage to 1.35 V to make sure the SoC is stable even if the blobs unconditionally force the CPU to 1 GHz operation. It is not possible to make use of CPUfreq on the STM32MP13xx because the SCMI protocol 0x13 is not implemented by upstream OpTee-OS which is the SCMI provider. Fixes: 6331bddce649 ("ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC board") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-12-09ARM: dts: stm32: Deduplicate serial aliases and chosen node for STM32MP15xx ↵Marek Vasut
DHCOM SoM Deduplicate /aliases { serialN = ... } and /chosen node into stm32mp15xx-dhcom-som.dtsi , since the content is identical on all carrier boards using the STM32MP15xx DHCOM SoM. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-12-09ARM: dts: imxrt1050: Fix clocks for mmcJesse Taube
One of the usdhc1 controller's clocks should be IMXRT1050_CLK_AHB_PODF not IMXRT1050_CLK_OSC. Fixes: 1c4f01be3490 ("ARM: dts: imx: Add i.MXRT1050-EVK support") Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-12-09arm/bL_switcher: Use kthread_run_on_cpu()Frederic Weisbecker
Use the proper API instead of open coding it. Reviewed-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2024-12-09ARM: imx_v6_v7_defconfig: enable SND_SOC_SPDIFStefan Eichenberger
Enable SND_SOC_SPDIF in imx_v6_v7_defconfig to support SPDIF audio. With commit d469b771afe1 ("ARM: dts: imx6: update spdif sound card node properties"), the more generic audio-codec property is used instead of the old spdif-controller property. Since most i.MX6 boards now use the audio-codec property together with the linux,spdif-dit and linux,spdif-dir compatible driver, it makes sense to enable SND_SOC_SPDIF in the imx_v6_v7_defconfig. This will ensure compatibility with the updated device tree. Without this change, boards that use the audio-codec property will show the following error message during boot when using the imx_v6_v7_defconfig and spdif audio is not working: [ 24.165534] platform sound-spdif: deferred probe pending: fsl-asoc-card: snd_soc_register_card failed Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-12-09ARM: imx_v6_v7_defconfig: enable JC42 for TQMa7xAlexander Stein
TQMa7x uses an JC42 compatible temperature sensor. Enable the corresponding driver. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-12-09ARM: dts: imx7[d]-mba7: add Ethernet PHY IRQ supportAlexander Stein
The regulator-fec*-pwdn regulators were used to deassert the PWDN signal of ethernet PHY, e.g. not powering. This is not necessary as the line has a pull-up already. Instead of the combo pad of the PHY for IRQ support. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-12-09ARM: dts: imx7-mba7: Remove duplicated power supplyAlexander Stein
VCC3V3 is used twice, resulting in the debugfs warning: debugfs: Directory 'VCC3V3' with parent 'regulator' already present! The power supply provided by reg_vcc_3v3 is actually the same as reg_mba_3v3. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-12-09ARM: dts: imx7-mba7: Fix SD card vmmc-supplyAlexander Stein
The SD card is directly supplied by VCC3V3. Remove superfluous regulator. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-12-09ARM: dts: imx7-mba7: Add 3.3V and 5.0V regulatorsAlexander Stein
These voltages are provided unconditionally from external power supply and are input voltages to various dedicated, switchable, power rails. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-12-09ARM: dts: imx7-tqma7: add missing vs-supply for LM75A (rev. 01xxx)Alexander Stein
Add missing supply for LM75. Fixes the kernel warning: lm75 0-0048: supply vs not found, using dummy regulator Fixes: c9d4affbe60a ("ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx)") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-12-09ARM: dts: imx7-tqma7: Remove superfluous status="okay" propertyAlexander Stein
There is no need to specify status = "okay"; for newly created nodes, remove this property. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-12-09ARM: dts: imx7-mba7: remove LVDS transmitter regulatorAlexander Stein
This regulator essentially controls the SHTDN# pin of the LVDS encoder. Remove it for proper usage with 'lvds-encoder' driver. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-12-09ARM: dts: imx: Switch to {hp,mic}-det-gpiosGeert Uytterhoeven
Replace the deprecated "hp-det-gpio" and "mic-det-gpio" properties by "hp-det-gpios" resp. "mic-det-gpios" in Freescale Generic ASoC Sound Card device nodes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-12-08ARM: configs: at91: sama7: add new SoC configRyan Wanner
Add sama7d65 to the sama7_defconfig. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/e5a1311100a4f05fdc44107e124129d2d93df2e0.1733505542.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
generated by cgit (git 2.34.1) at 2025-07-15 18:03:33 +0000