summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2024-10-08ARM: dts: bcm2837-rpi-cm3-io3: Fix HDMI hpd-gpio pinFlorian Klink
HDMI_HPD_N_1V8 is connected to GPIO pin 0, not 1. This fixes HDMI hotplug/output detection. See https://datasheets.raspberrypi.com/cm/cm3-schematics.pdf Signed-off-by: Florian Klink <flokli@flokli.de> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20240715230311.685641-1-flokli@flokli.de Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Fixes: a54fe8a6cf66 ("ARM: dts: add Raspberry Pi Compute Module 3 and IO board") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-10-08ARM: multi_v7_defconfig: Enable debugging symbols by defaultFlorian Fainelli
Similarly to the ARM64 defconfig, enable debugging symbols and rely upon the toolchain's default DWARF implementation. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-10-08ARM: dts: imx7ulp: add "nxp,sim" property for usbphy1Xu Yang
i.MX7ULP need properly set System Integration Module(SIM) module to make usb wakeup work well. This will add a "nxp,sim" property for usbphy1. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-08ARM: dts: imx28-apx4devkit: Fix the rtc compatibleFabio Estevam
"phg,pcf8563" is not a valid compatible string. Use the documented ""nxp,pcf8563" instead. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-08ARM: dts: imx6qdl-mba6: Add reserved memory area for CMA memoryAlexander Stein
Default CMA size is too small for HDMI output and VPU usage. Increase the default size by providing a CMA memory area. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-07ARM: dts: renesas: rcar-gen2: Switch HS-USB to renesas,enable-gpiosGeert Uytterhoeven
Commit 2071d0968e564b4b ("Documentation: gpio: guidelines for bindings") deprecated the "gpio" suffix for GPIO consumers in favor of the "gpios" suffix. Hence replace the "renesas,enable-gpio" property by "renesas,enable-gpios" in HS-USB device nodes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/c88724ce1e0d755302659cd790c0869ff579684e.1727853953.git.geert+renesas@glider.be
2024-10-07ARM: dts: renesas: r7s72100: 'bus-width' is a board propertyWolfram Sang
Do not set 'bus-width' in the SoC-include DTSI. It must be set in the board DTS file. No regressions because MMCIF was not enabled yet for this SoC. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240928092953.2982-7-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-07ARM: dts: renesas: Use proper node names for keysWolfram Sang
Avoids 'keyboard: 'four', 'one', 'three', 'two' do not match any of the regexes: ... Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240926110718.20519-6-wsa+renesas@sang-engineering.com Link: https://lore.kernel.org/20240926110718.20519-7-wsa+renesas@sang-engineering.com Link: https://lore.kernel.org/20240926110718.20519-8-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-07ARM: dts: renesas: r8a7778: Rename 'bsc' to 'lbsc'Wolfram Sang
R-Car Gen1 has an LBSC which has quite a different register set from the former BSC. To match R-Car M1 with R-Car H1, rename the node to LBSC. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240926103340.16909-6-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-07ARM: dts: renesas: Add proper node names to (L)BSC devicesWolfram Sang
(L)BSC must have a "bus" node name [1] and no unit-address because there is no reg-property. Fix these entries. [1] lbsc: $nodename:0: 'lbsc' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240926103340.16909-5-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-05ARM: dts: qcom: minor whitespace cleanupKrzysztof Kozlowski
The DTS code coding style expects exactly one space around '=' or '{' characters. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konradybcio@kernel.org> Link: https://lore.kernel.org/r/20240905-dts-cleanup-v1-2-f4c5f7b2c8c2@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-05ARM: dts: qcom: drop underscore in node namesKrzysztof Kozlowski
Underscores should not be used in node names (dtc with W=2 warns about them), so replace them with hyphens. Use also generic name for avago,apds9930 node, because generic naming is favored by Devicetree spec. Functional impact checked with comparing before/after DTBs with dtx_diff and fdtdump. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konradybcio@kernel.org> Link: https://lore.kernel.org/r/20240905-dts-cleanup-v1-1-f4c5f7b2c8c2@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-04ARM: dts: ti: dra7: Remove double include of clock bindingsMarcus Folkesson
There is no need to include the same file twice. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Link: https://lore.kernel.org/r/20240925-dra7-v1-1-3fe33a84bcd7@gmail.com Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-10-04ARM: dts: ti: omap3434-sdp: drop linux,mtd-name from onenand nodeRoger Quadros
linux,mtd-name is only applicable for PHYSMAP driver and not for OneNAND. Fixes the below dtbs_check warning "omap3430-sdp.dtb: onenand@2,0: Unevaluated properties are not allowed ('linux,mtd-name' was unexpected)" Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20240903-gpmc-dtb-v1-3-380952952e34@kernel.org Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-10-04ARM: dts: ti: omap: am335x-baltos: drop "gpmc,device-nand" from NAND nodeRoger Quadros
"gpmc,device-nand" is not used any more and leads to below dtbs_check warning so drop it. "nand@0,0: Unevaluated properties are not allowed ('gpmc,device-nand' was unexpected)" Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20240903-gpmc-dtb-v1-2-380952952e34@kernel.org Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-10-04ARM: dts: ti: drop linux,mtd-name from NAND nodesRoger Quadros
linux,mtd-name is only supported by PHYSMAP driver and not applicable to NAND controller/flash nodes. Fixes the below dtbs_check warning on many OMAP boards. "nand@0,0: Unevaluated properties are not allowed ('linux,mtd-name' was unexpected)" Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20240903-gpmc-dtb-v1-1-380952952e34@kernel.org Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-10-04ARM: dts: ti/omap: Fix at24 EEPROM node namesRob Herring (Arm)
at24.yaml defines the node name for at24 EEPROMs as 'eeprom'. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Acked-by: hns@goldelico.com # for GTA04 Link: https://lore.kernel.org/r/20240910215942.824137-1-robh@kernel.org Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-10-02ARM: zynq: Remove unused zynq_slcr_init() declarationGaosheng Cui
The zynq_slcr_init() has been removed since commit 3329659df030 ("ARM: zynq: Simplify SLCR initialization"), so remove it. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20240813103556.1138061-1-cuigaosheng1@huawei.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-10-01ARM: dts: socfpga: Fix at24 EEPROM node namesRob Herring (Arm)
at24.yaml defines the node name for at24 EEPROMs as 'eeprom'. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2024-10-01ARM: dts: renesas: rskrza1: Enable watchdog timerGeert Uytterhoeven
Enable the Watchdog Timer (WDT) on the Renesas RSK+RZA1 development board equipped with an RZ/A1H SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/fe72fb72acde4f5d9f8bd1a012435519592bd2bc.1727441772.git.geert+renesas@glider.be
2024-10-01ARM: dts: renesas: rza2mevb: Use interrupts-extended for gpio-keysWolfram Sang
Use the more concise interrupts-extended property to fully describe the interrupt. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240927095414.10241-10-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-01ARM: dts: renesas: rskrza1: Use interrupts-extended for gpio-keysWolfram Sang
Use the more concise interrupts-extended property to fully describe the interrupt. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240927095414.10241-9-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-01ARM: dts: renesas: marzen: Use interrupts-extended for gpio-keysWolfram Sang
Using the inherited interrupt-parent is discouraged. Use interrupts-extended to fully describe the interrupt. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240927095414.10241-7-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-01ARM: dts: renesas: Remove 'reg-io-width' properties from MMCIF nodesWolfram Sang
The driver does not use this property and all upstream SoCs use the same value anyhow. Remove it and get rid of a lot of dtbs_check warnings. Tested with a Lager (R-Car H2) board and with the soon to be added Genmai (RZA1) MMCIF support. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240925150904.3582-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-01ARM: dts: renesas: Genmai: Update audio codec device nodeWolfram Sang
Meanwhile, bindings for the audio codec exist. Add #sound-dai-cells property and limit max frequency accordingly. codec@0: '#sound-dai-cells' is a required property codec@0: spi-max-frequency: 5000000 is greater than the maximum of 526000 Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240925090812.14497-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-01ARM: dts: renesas: genmai: Define keyboard switchWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240921114813.4124-12-wsa+renesas@sang-engineering.com Link: https://lore.kernel.org/20240927095414.10241-8-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-01ARM: dts: renesas: genmai: Sort nodesWolfram Sang
To make future additions easier. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240921114813.4124-10-wsa+renesas@sang-engineering.com Link: https://lore.kernel.org/20240921114813.4124-11-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-01ARM: dts: renesas: genmai: Enable OS timer modulesWolfram Sang
Driver has been submitted meanwhile. Activate the devices. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240921114813.4124-9-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-01ARM: dts: renesas: genmai: Enable watchdogWolfram Sang
Driver has been submitted meanwhile. Activate the device. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240921114813.4124-8-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-01ARM: dts: renesas: genmai: Fix partition size for QSPI NOR FlashWolfram Sang
Second partition was too large, looks like two digits got mixed up. Fixes: mtd: partition "user1" extends beyond the end of device "18000000.flash" -- size truncated to 0x4000000 Fixes: 30e0a8cf886c ("ARM: dts: renesas: genmai: Add FLASH nodes") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240914182948.94031-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-01ARM: imx: Allow user to disable pinctrlEsben Haabendal
Making pinctrl drivers and subsequently the pinctrl framework user-controllable, allows building a kernel without this. While in many (most) cases, this could make the system unbootable, it does allow building smaller kernels for those situations where picntrl is not needed. One such situation is when building a kernel for NXP LS1021A systems, which does not have run-time controllable pinctrl, so pinctrl framework and drivers are 100% dead-weight. Signed-off-by: Esben Haabendal <esben@geanix.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/20240506-imx-pinctrl-optional-v2-1-bdff75085156@geanix.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-09-30ARM: dts: amlogic: meson8b-ec100: add missing gpio-line-names entryNeil Armstrong
The EC100 gpio-line-names table is not the right size, add the missing cell and fix: meson8b-ec100.dtb: pinctrl@9880: bank@80b0:gpio-line-names: [...] is too short Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20240916-topic-amlogic-arm32-upstream-bindings-fixes-v2-11-0b20ed4f0571@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-09-30ARM: dts: amlogic: meson8b-ec100: add missing clocks property in sound cardNeil Armstrong
Since [1], sound card must have the corresponding clocks property, add it to the EC100 DT, and fix: meson8b-ec100.dtb: sound: 'anyOf' conditional failed, one must be fixed: 'clocks' is a required property '#clock-cells' is a required property from schema $id: http://devicetree.org/schemas/clock/clock.yaml# [1] ASoC: dt-bindings: amlogic,gx-sound-card: document clocks property commit: f189c972f86b00318cf2547b62e461cb98374e34 Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20240916-topic-amlogic-arm32-upstream-bindings-fixes-v2-10-0b20ed4f0571@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-09-30ARM: dts: amlogic: meson8-minix-neo-x8: fix invalid pnictrl-namesNeil Armstrong
The property pnictrl-names is wrong, rename it to pinctrl-names and fix: ethernet@c9410000: Unevaluated properties are not allowed ('clock-names', 'clocks', 'interrupt-names', 'interrupts', 'pnictrl-names', 'power-domains' were unexpected) from schema $id: http://devicetree.org/schemas/net/amlogic,meson-dwmac.yaml# Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20240916-topic-amlogic-arm32-upstream-bindings-fixes-v2-9-0b20ed4f0571@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-09-30ARM: dts: amlogic: add missing phy-mode in ethmac nodeNeil Armstrong
The phy-node property is required, add it and fix: ethernet@c9410000: 'phy-mode' is a required property from schema $id: http://devicetree.org/schemas/net/snps,dwmac.yaml# Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20240916-topic-amlogic-arm32-upstream-bindings-fixes-v2-8-0b20ed4f0571@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-09-30ARM: dts: amlogic: meson8: use correct pinctrl bank node nameNeil Armstrong
Use the proper name for the pinctrl bank subnode, fixing: pinctrl@9880: Unevaluated properties are not allowed ('banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'reg', 'reg' were unexpected) from schema $id: http://devicetree.org/schemas/pinctrl/amlogic,meson8-pinctrl-cbus.yaml# pinctrl@84: Unevaluated properties are not allowed ('ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'reg', 'reg' were unexpected) Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20240916-topic-amlogic-arm32-upstream-bindings-fixes-v2-7-0b20ed4f0571@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-09-30ARM: dts: amlogic: fix /memory node nameNeil Armstrong
Use proper address in /memory node name, fixing: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[1073741824, 2147483648]]} Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # Odroid-C1 Link: https://lore.kernel.org/r/20240916-topic-amlogic-arm32-upstream-bindings-fixes-v2-6-0b20ed4f0571@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-09-30ARM: dts: amlogic: meson8b-odroidc1: fix invalid reset-gpioNeil Armstrong
Use the proper "-gpios" property name, fixing: hub@1: 'reset-gpio' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml# Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20240916-topic-amlogic-arm32-upstream-bindings-fixes-v2-5-0b20ed4f0571@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-09-30ARM: dts: amlogic: meson6: remove support for ATV1200 boardNeil Armstrong
The meson6 atv1200 has a lot of dtbs check errors, but since no active contributor have any boards with Meson6 SoC, plus no upstream GPIO, pinctrl, clock, MMC... for that SoC either, let's start decommissioning Meson6 support by removing the Device Tree files first then remove the MACH_MESON6 in a second time. If someone is interested in Meson6 support they should bring it back along with a few more patches for upstream support of further peripherals. Suggested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20240916-topic-amlogic-arm32-upstream-bindings-fixes-v2-4-0b20ed4f0571@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-09-30ARM: dts: amlogic: meson8: fix ao_arc_sram node nameNeil Armstrong
Use the proper node name for the sram, fixing: sram@d9000000: 'ao-arc-sram@0' does not match any of the regexes: '^([a-z0-9]*-)?sram(-section)?@[a-f0-9]+$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/sram/sram.yaml# Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20240916-topic-amlogic-arm32-upstream-bindings-fixes-v2-3-0b20ed4f0571@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-09-30ARM: dts: amlogic: meson8: fix soc thermal-zone node nameNeil Armstrong
Use proper name for the soc thermal, fixing: thermal-zones: 'soc' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,10}-thermal$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml# Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20240916-topic-amlogic-arm32-upstream-bindings-fixes-v2-2-0b20ed4f0571@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-09-30ARM: dts: amlogic: meson6: fix clk81 node nameNeil Armstrong
Use the proper node name, fixing: arch/arm/boot/dts/amlogic/meson6-atv1200.dtb: /: clk@0: 'anyOf' conditional failed, one must be fixed: 'reg' is a required property 'ranges' is a required property from schema $id: http://devicetree.org/schemas/root-node.yaml# Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20240916-topic-amlogic-arm32-upstream-bindings-fixes-v2-1-0b20ed4f0571@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-09-26Merge tag 'soc-ep93xx-dt-6.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC update from Arnd Bergmann: "Convert ep93xx to devicetree This concludes a long journey towards replacing the old board files with devictree description on the Cirrus Logic EP93xx platform. Nikita Shubin has been working on this for a long time, for details see the last post on https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/" * tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config net: cirrus: use u8 for addr to calm down sparse dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0 dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe() pinctrl: ep93xx: Fix raster pins typo spi: ep93xx: update kerneldoc comments for ep93xx_spi clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate() clk: ep93xx: add module license dmaengine: cirrus: remove platform code ASoC: cirrus: edb93xx: Delete driver ARM: ep93xx: soc: drop defines ARM: ep93xx: delete all boardfiles ata: pata_ep93xx: remove legacy pinctrl use pwm: ep93xx: drop legacy pinctrl ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms ARM: dts: ep93xx: Add EDB9302 DT ARM: dts: ep93xx: add ts7250 board ARM: dts: add Cirrus EP93XX SoC .dtsi ...
2024-09-24Merge tag 'input-for-v6.12-rc0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - support for PixArt PS/2 touchpad - updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers - support for GPIO-only mode for ADP55888 controller - support for touch keys in Zinitix driver - support for querying density of Synaptics sensors - sysfs interface for Goodex "Berlin" devices to read and write touch IC registers - more quirks to i8042 to handle various Tuxedo laptops - a number of drivers have been converted to using "guard" notation when acquiring various locks, as well as using other cleanup functions to simplify releasing of resources (with more drivers to follow) - evdev will limit amount of data that can be written into an evdev instance at a given time to 4096 bytes (170 input events) to avoid holding evdev->mutex for too long and starving other users - Spitz has been converted to use software nodes/properties to describe its matrix keypad and GPIO-connected LEDs - msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been removed since noone in mainline have been using them - other assorted cleanups and fixes * tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits) ARM: spitz: fix compile error when matrix keypad driver is enabled Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0 Input: adp5588-keys - fix check on return code Input: Convert comma to semicolon Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present() Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq() Input: ims-pcu - fix calling interruptible mutex Input: zforce_ts - switch to using asynchronous probing Input: zforce_ts - remove assert/deassert wrappers Input: zforce_ts - do not hardcode interrupt level Input: zforce_ts - switch to using devm_regulator_get_enable() Input: zforce_ts - stop treating VDD regulator as optional Input: zforce_ts - make zforce_idtable constant Input: zforce_ts - use dev_err_probe() where appropriate Input: zforce_ts - do not ignore errors when acquiring regulator Input: zforce_ts - make parsing of contacts less confusing Input: zforce_ts - switch to using get_unaligned_le16 Input: zforce_ts - use guard notation when acquiring mutexes ...
2024-09-23Merge tag 'i2c-for-6.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C core: - finally remove the I2C_COMPAT symbol after 15 years of deprecation - lock client addresses during initialization to prevent race conditions between different kinds of instantiation - use scoped foreach OF child loops - testunit cleanups and documentation improvements, as well as two new tests, one for repeated start and one for triggering SMBusAlert interrupts I2C host drivers: - DesignWare and Renesas I2C driver updates. The first has has undergone through a series of cleanups that have been sent to the mailing list a year ago for the first time and finally get merged in this pull request. They are many, from typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline functions to librarieas) and many others. - all the DesignWare Kconfig options have been grouped under the I2C_DESIGNWARE_CORE and this required some adaptation in many of the kernel configuration files for different arm and mips boards Cleanups: - improve the exit path in the runtime resume function for the Qualcomm Geni platform - get rid of the unused "target_addr" parameter in the Intel LJCA driver - intialize the restart_flag in the MediaTek controller in one single place - constify a few global data structures in the virtio driver - simplify the bus speed handling in the Renesas driver init function making it more readable - improved probe function of the Renesas R-Car driver - switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of SET_RUNTIME_PM_OPS() - iMX/MXC driver cleanups - use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic and MPC drivers Refactoring: - Fix a potential out of boundary array access in the Nuvoton driver. This is not a bug fix because the issue could never occur due to hardware not having the properties listed in the array. The change makes the driver more future proof and, at the same time, silences code analyzers. Improvements: - several patches improving the runtime power management handling of the Renesas I2C (riic) driver - use a more descriptive adapter name in the Intel i801 driver to show the presence of the IDF feature - kill pending transactions when irq's can't complete their handling in the Intel Denverton (ismt) driver, triggering a timeout New Feature: - support fast mode plus in the Renesas I2C (riic) driver New support: - Added support for: - Renesas R9A08G045 - Rockchip RK3576 - KEBA I2C - Theobroma Systems Mule Multiplexer. - new i2c-keba.c driver - new driver for The Mule i2c multiplexer Core I2C framework: - move runtime PM functions in order to allow them to be accessed during device add Devicetree: - nVidia and Qualcomm binding improvements - get rid of redundant "multi-master" property in the aspeed binding - convert i2c-sprd binding to YAML AT24 updates: - document a new model from giantec in DT bindings" * tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits) i2c: designware: Use pci_get_drvdata() i2c: designware: Propagate firmware node i2c: designware: Uninline i2c_dw_probe() i2c: ljca: Remove unused "target_addr" parameter i2c: keba: Add KEBA I2C controller support i2c: i801: Use a different adapter-name for IDF adapters i2c: core: Setup i2c_adapter runtime-pm before calling device_add() dt-bindings: i2c: i2c-sprd: convert to YAML i2c: ismt: kill transaction in hardware on timeout i2c: designware: Group all DesignWare drivers under a single option net: txgbe: Fix I2C Kconfig dependencies RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe() i2c: imx: Convert comma to semicolon i2c: jz4780: Use devm_clk_get_enabled() helpers ...
2024-09-23Merge tag 'dmaengine-6.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Unusually, more new driver and device support than updates. Couple of new device support, AMD, Rcar, Intel and New drivers in Freescale, Loonsoon, AMD and LPC32XX with DT conversion and mode updates etc. New support: - Support for AMD Versal Gen 2 DMA IP - Rcar RZ/G3S SoC dma controller - Support for Intel Diamond Rapids and Granite Rapids-D dma controllers - Support for Freescale ls1021a-qdma controller - New driver for Loongson-1 APB DMA - New driver for AMD QDMA - Pl08x in LPC32XX router dma driver Updates: - Support for dpdma cyclic dma mode - XML conversion for marvell xor dma bindings - Dma clocks documentation for imx dma" * tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits) dmaengine: loongson1-apb-dma: Fix the build warning caused by the size of pdev_irqname dmaengine: Fix spelling mistakes dmaengine: Add dma router for pl08x in LPC32XX SoC dmaengine: fsl-edma: add edma src ID check at request channel dmaengine: fsl-edma: change to guard(mutex) within fsl_edma3_xlate() dmaengine: avoid non-constant format string dmaengine: imx-dma: Remove i.MX21 support dt-bindings: dma: fsl,imx-dma: Document the DMA clocks dmaengine: Loongson1: Add Loongson-1 APB DMA driver dt-bindings: dma: Add Loongson-1 APB DMA dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string dmaengine: idxd: Add new DSA and IAA device IDs for Diamond Rapids platform dmaengine: idxd: Add a new DSA device ID for Granite Rapids-D platform dmaengine: ti: k3-udma: Remove unused declarations dmaengine: amd: qdma: Add AMD QDMA driver dmaengine: xilinx: dpdma: Add support for cyclic dma mode dma: ipu: Remove include/linux/dma/ipu-dma.h dt-bindings: dma: fsl-mxs-dma: Add compatible string "fsl,imx8qxp-dma-apbh" dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma ...
2024-09-23Merge tag 'pull-stable-struct_fd' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull 'struct fd' updates from Al Viro: "Just the 'struct fd' layout change, with conversion to accessor helpers" * tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: add struct fd constructors, get rid of __to_fd() struct fd: representation change introduce fd_file(), convert all accessors to it.
2024-09-23ARM: spitz: fix compile error when matrix keypad driver is enabledDmitry Torokhov
The correct macro name for creating a u32 array property entry is PROPERTY_ENTRY_U32_ARRAY(). Reported-by: kernel test robot <lkp@intel.com> Fixes: 1b05a7013751 ("ARM: spitz: Use software nodes/properties for the matrix keypad") Closes: https://lore.kernel.org/oe-kbuild-all/202409230614.BBJikfMj-lkp@intel.com/ Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-09-21Merge tag 'mm-nonmm-stable-2024-09-21-07-52' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "Many singleton patches - please see the various changelogs for details. Quite a lot of nilfs2 work this time around. Notable patch series in this pull request are: - "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to provide (much) more accurate results. The current implementation was causing Uwe some issues in the PWM drivers. - "xz: Updates to license, filters, and compression options" from Lasse Collin. Miscellaneous maintenance and kinor feature work to the xz decompressor. - "Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee. Fixes and enhancements to the gdb scripts. - "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this. - "nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds various commonly-available ioctls to nilfs2. - "This series fixes a number of formatting issues in kernel doc comments" from Ryusuke Konishi does that. - "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix issues where -ENOENT was being unintentionally and inappropriately returned to userspace. - "nilfs2: assorted cleanups" from Huang Xiaojia. - "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke Konishi fixes some issues which can occur on corrupted nilfs2 filesystems. - "scripts/decode_stacktrace.sh: improve error reporting and usability" from Luca Ceresoli does those things" * tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits) list: test: increase coverage of list_test_list_replace*() list: test: fix tests for list_cut_position() proc: use __auto_type more treewide: correct the typo 'retun' ocfs2: cleanup return value and mlog in ocfs2_global_read_info() nilfs2: remove duplicate 'unlikely()' usage nilfs2: fix potential oob read in nilfs_btree_check_delete() nilfs2: determine empty node blocks as corrupted nilfs2: fix potential null-ptr-deref in nilfs_btree_insert() user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation tools/mm: rm thp_swap_allocator_test when make clean squashfs: fix percpu address space issues in decompressor_multi_percpu.c lib: glob.c: added null check for character class nilfs2: refactor nilfs_segctor_thread() nilfs2: use kthread_create and kthread_stop for the log writer thread nilfs2: remove sc_timer_task nilfs2: do not repair reserved inode bitmap in nilfs_new_inode() nilfs2: eliminate the shared counter and spinlock for i_generation nilfs2: separate inode type information from i_state field nilfs2: use the BITS_PER_LONG macro ...
generated by cgit (git 2.34.1) at 2025-07-18 09:53:56 +0000