summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2024-08-31ARM: dts: imx28-apx4devkit: Fix the regulator descriptionFabio Estevam
The regulator should not be placed under simple-bus. Remove it from simple-bus to fix the following dt-schema warnings: 'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' regulators: #size-cells:0:0: 0 is not one of [1, 2] regulators: regulator@0:reg:0: [0] is too short regulators: 'ranges' is a required property Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-08-31ARM: dts: microchip: sama7g5: Fix RTT clockClaudiu Beznea
According to datasheet, Chapter 34. Clock Generator, section 34.2, Embedded characteristics, source clock for RTT is the TD_SLCK, registered with ID 1 by the slow clock controller driver. Fix RTT clock. Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") Link: https://lore.kernel.org/r/20240826165320.3068359-1-claudiu.beznea@tuxon.dev Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-30firmware/smccc: Call arch-specific hook on discovering KVM servicesMarc Zyngier
arm64 will soon require its own callback to initialise services that are only available on this architecture. Introduce a hook that can be overloaded by the architecture. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20240830130150.8568-2-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2024-08-29ARM: dts: rockchip: Do not describe unexisting DAC device on rv1108-elgin-r1Fabio Estevam
There is no DAC connected to the SPI bus of the Elgin RV1108 R1 board. There is a JG10309-01 LCD controlled via SPI though. Properly describe it by adding the "elgin,jg10309-01" compatible string. Reported-by: Conor Dooley <conor.dooley@microchip.com> Closes: https://lore.kernel.org/linux-arm-kernel/20240717-parrot-malt-83cc04bf6b36@spud/ Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20240829113158.3324928-3-festevam@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-08-29dmaengine: Add dma router for pl08x in LPC32XX SoCPiotr Wojtaszczyk
LPC32XX connects few of its peripherals to pl08x DMA thru a multiplexer, this driver allows to route a signal request line thru the multiplexer for given peripheral. Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com> Link: https://lore.kernel.org/r/20240628152022.274405-1-piotr.wojtaszczyk@timesys.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-29ARM: tegra: Wire up two front panel LEDs on TrimSliceTomasz Maciej Nowak
Pins responsible for controlling these LEDs need to have tristate control removed if we want them as GPIOs. This change aligns with pinmux configuration of "dte" pin group in downstream kernel[1]. These LEDs had no function assigned on vendor kernel and there is no label on the case, the only markings are on PCB which are part of node names (ds1 marking is on power LED controlled by PMIC), so generic term is assigned as the function. 1. https://github.com/compulab/trimslice-android-kernel/blob/upstream/arch/arm/mach-tegra/board-trimslice-pinmux.c#L45 Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Configure USBSvyatoslav Ryhel
Fixes issue when resuming after suspend made USB in peripheral mode inaccessible. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Use dedicated backlight regulatorSvyatoslav Ryhel
Downstream kernel states that backlight has no actual enable GPIO and uses fixed regulator. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Re-group GPIO keysSvyatoslav Ryhel
Group GPIO keys into keys and switches. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Bind WIFI SDIO and EMMCSvyatoslav Ryhel
Add MMC nodes configuration along with WIFI binding to ASUS TF701T device-tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Complete sound bindingsSvyatoslav Ryhel
With these changes sound works, only UCM configs are needed for complete support. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Adjust sensors nodesSvyatoslav Ryhel
Complete and adjust magnetometer, thermal sensor, motion tracker, power and light sensors according to available sources. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Add Bluetooth nodeSvyatoslav Ryhel
Add serial node along with bluetooth node to ASUS TF701T device-tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Add HDMI bindingsSvyatoslav Ryhel
Add HDMI nodes to ASUS TF701T device-tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Correct and complete PMIC and PMC bindingsSvyatoslav Ryhel
Add missing parts of PMIC complex, extend PMC binding and add missing fixed regulators. Additionally, refresh naming to better reflect regulator purpose. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Bind VDE deviceSvyatoslav Ryhel
Add Video Decoder Engine node to ASUS TF701T device-tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Use unimomentary pinmux setupSvyatoslav Ryhel
Mimic original downstream board behavior to set up all pinmux at once. Per-device pinmux is good but we have no complete board schematics to allow such luxury. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-28Merge tag 'imx-fixes-6.11' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.11: - One imx8mp-beacon-kit change from Adam Ford to fix the broken WM8962 audio support - One pinctrl property typo fix for imx8mm-phygate - One layerscape fix from Krzysztof Kozlowski to get thermal nodes correct name length - A couple of imx93-tqma9352 fixes from Markus Niebel, one on CMA alloc-ranges and the other on SD-Card cd-gpios typo - One change from Michal Vokáč to fix imx6dl-yapp43 LED current to match the HW design - A couple of imx95 fixes from Peng Fan, one to correct a55 power domains and the other to correct L3Cache cache-sets - One tqma9352 watchdog reset fix from Sascha Hauer - One imx93 change from Shenwei Wang to fix the default value for STMMAC EQOS snps,clk-csr * tag 'imx-fixes-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mm-phygate: fix typo pinctrcl-0 arm64: dts: imx95: correct L3Cache cache-sets arm64: dts: imx95: correct a55 power-domains arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design arm64: dts: imx93: update default value for snps,clk-csr arm64: dts: freescale: tqma9352: Fix watchdog reset arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962 arm64: dts: layerscape: fix thermal node names length Link: https://lore.kernel.org/r/ZrtsTO1+jXhJ6GSM@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-08-28Merge tag 'omap-for-v6.11/fixes-signed' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into arm/fixes OMAP fixes for v6.11-rc - omap3-n900: fix accelerometer orientation * tag 'omap-for-v6.11/fixes-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap: ARM: dts: omap3-n900: correct the accelerometer orientation Link: https://lore.kernel.org/r/7h4j7eyhyh.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-08-28ARM: dts: rockchip: Add vpu nodes for RK3128Alex Bee
Add nodes for the vpu and it's attached iommu which are both part of the RK3128_PD_VIDEO powerdomain. Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20240523185633.71355-4-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-08-28ARM: dts: imx7-mba7: improve compatible for LM75 temp sensorMarkus Niebel
Use national,lm75a to specify exact variant used. This should cause no functional changes. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-08-28ARM: dts: imx7-mba7: add iio-hwmon supportMarkus Niebel
Enable IIO hwmon support for ADC1 and ADC2. All channels are available on X23 (ADC2) and X24 (ADC1) of MBa7x. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-08-27ARM: dts: aspeed: catalina: Update io expander line namesPotin Lai
io_expander7 - P1-5: MCU_GPIO - P1-6: MCU_RST_N - P1-7: MCU_RECOVERY_N io_expander8 - P1-5: SEC_MCU_GPIO - P1-6: SEC_MCU_RST_N - P1-7: SEC_MCU_RECOVERY_N Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://lore.kernel.org/r/20240823-catalina-ioexp-update-v1-2-4bfd8dad819c@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-27ARM: dts: aspeed: catalina: Add pdb cpld io expanderPotin Lai
Add more IO expanders which are emulated by the PDB CPLD. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://lore.kernel.org/r/20240823-catalina-ioexp-update-v1-1-4bfd8dad819c@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-24ARM: dts: microchip: sam9x60: Fix rtc/rtt clocksAlexander Dahl
The RTC and RTT peripherals use the timing domain slow clock (TD_SLCK), sourced from the 32.768 kHz crystal oscillator or slow rc oscillator. The previously used Monitoring domain slow clock (MD_SLCK) is sourced from an internal RC oscillator which is most probably not precise enough for real time clock purposes. Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Fixes: 5f6b33f46346 ("ARM: dts: sam9x60: add rtt") Signed-off-by: Alexander Dahl <ada@thorsis.com> Link: https://lore.kernel.org/r/20240821055136.6858-1-ada@thorsis.com [claudiu.beznea: removed () around the last commit description paragraph, removed " in front of "timing domain slow clock", described that TD_SLCK can also be sourced from slow rc oscillator] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-24ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO nodeManikandan Muralidharan
The driver data specific to each pinctrl GPIO bank compatible nodes are not the same and declaring additional compatible string as fallback has no specific purpose, hence, removing the "atmel,at91sam9x5-gpio" compatible from sam9x60 SoC DT. Note: The at91 pinctrl driver uses "atmel,at91rm9200-gpio" compatible string to find the number of active GPIO banks and identify the pinmux nodes.It should used as a constant across all DT for GPIO node banks that uses PIO3 based pinctrl driver Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240814061315.112564-4-manikandan.m@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-24ARM: dts: microchip: Remove additional compatible string from PIO3 pinctrl nodesManikandan Muralidharan
The driver data specific to each pinctrl GPIO bank compatible nodes are not the same and declaring additional compatible string as fallback has no specific purpose, hence, removing the additional compatible string from the pinctrl nodes in DT to comply with atmel,at91-pinctrl.txt documentation. Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240814061315.112564-3-manikandan.m@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-24ARM: dts: microchip: change to simple-mfd from simple-bus for PIO3 pinumux ↵Manikandan Muralidharan
controller The pinctrl subnodes that define the pin configuration of other devices under PIO3 pinmux controller are not simple memory mapped nodes.Ergo, change simple-bus to simple-mfd. Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240814061315.112564-2-manikandan.m@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-24crypto: simd - Do not call crypto_alloc_tfm during registrationHerbert Xu
Algorithm registration is usually carried out during module init, where as little work as possible should be carried out. The SIMD code violated this rule by allocating a tfm, this then triggers a full test of the algorithm which may dead-lock in certain cases. SIMD is only allocating the tfm to get at the alg object, which is in fact already available as it is what we are registering. Use that directly and remove the crypto_alloc_tfm call. Also remove some obsolete and unused SIMD API. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-08-22ARM: dts: aspeed: harma: Remove pca9546Peter Yin
Remove pca9546 device from i2c bus 9. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-12-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Fix spi-gpio dtb_check warningsPeter Yin
Revise spi-gpio node and property name and remove max-ngpios. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-11-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Enable mctp controllerPeter Yin
Enable the mctp controller in i2c9. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-10-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add temperature devicePeter Yin
Add temperature device in i2c0 and i2c2. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-9-peteryin.openbmc@gmail.com [andrew: Fixed 'deivce' typo in commit message] Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add fru devicePeter Yin
Add Aegis fru device and gpio expander device in bus 11. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-8-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Remove multi-host propertyPeter Yin
Harma is single host, so remove multi-host property. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-7-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add power monitor xdp710Peter Yin
Add HSC xdp710 device in i2c4. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-6-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add ina238Peter Yin
Add INA238 power monitor for Harma fan board. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-5-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add sgpio namePeter Yin
Add power-chassis-control and power-chassis-power for phosphor-power. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-4-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add VR devicesPeter Yin
Add isl69260, xdpe152c4 devices. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-3-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Revise hsc chipPeter Yin
Revise HSC chip name and address to match LTC4287. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-2-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed-g6: Drop cells properties from ethernet nodesAndrew Jeffery
These are not specified in the binding and produce warnings such as the following: arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:254.27-262.5: Warning (avoid_unnecessary_addr_size): /ahb/ethernet@1e670000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:264.27-272.5: Warning (avoid_unnecessary_addr_size): /ahb/ethernet@1e690000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dtb: ethernet@1e660000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-7-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed-g6: Use generic 'ethernet' for ftgmac100 nodesAndrew Jeffery
Squash warnings such as: arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dtb: ftgmac@1e670000: $nodename:0: 'ftgmac@1e670000' does not match '^ethernet(@.*)?$' Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-6-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: Clean up AST2500 pinctrl propertiesAndrew Jeffery
Many platforms were specifying the `aspeed,external-nodes` property required by the AST2500 pinctrl. However, its been specified in the pinctrl node directly in aspeed-g5.dtsi for quite a long time now. Remove the unnecessary override from all relevant platform dts files. Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-5-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: Remove undocumented XDMA nodesAndrew Jeffery
There's no binding defined for the device, so remove it from the devicetrees until someone has the motivation to write one. Squash warnings such as: arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dtb: /ahb/apb@1e6e0000/xdma@1e6e7000: failed to match any schema with compatible: ['aspeed,ast2500-xdma'] Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-4-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: Specify required properties for sram nodeAndrew Jeffery
Squash warnings such as: ``` arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: sram@1e720000: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: sram@1e720000: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: sram@1e720000: 'ranges' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# ``` Fixes: d44a1138cd82 ("arm/dts: Add Aspeed ast2400 device tree") Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-3-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: Specify correct generic compatible for CVICAndrew Jeffery
The ASPEED CVIC binding documents `aspeed,cvic` as the required generic compatible, but the devicetrees contained `aspeed-cvic`. Update the devictrees to use `aspeed,cvic` as documented and as required by the driver implementation. Presumably the bug was the result of some incoherent thoughts while removing the SoC name at the time of writing. Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-2-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: Fix coprocessor interrupt controller node nameAndrew Jeffery
Squash schema warnings such as: arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: copro-interrupt-controller@1e6c2000: $nodename:0: 'copro-interrupt-controller@1e6c2000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-1-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtmitchell: Add LEDsChanh Nguyen
Add LED nodes as the gpio-leds devices. They are led-bmc-ready, led-sw-heartbeat, led-identify, led-fault, led-fan-fault, led-psu-fault Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-6-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtmitchell: Enable i2c10 and i2c15Chanh Nguyen
Enable the BMC I2C10. Enable the BMC I2C15 and add the GPIO Expander as a child node. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-5-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtmitchell: Add Riser cardsChanh Nguyen
Define the I2C alias ports for the riser cards. Add the i2c muxes to switch to the i2c alias ports and the eeprom nodes to read the FRU contents on riser cards. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-4-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
generated by cgit (git 2.34.1) at 2025-07-18 19:11:54 +0000