| Age | Commit message (Collapse) | Author |
|---|
|
In some builds, the mpc52xx_pm_prepare()/lite5200_pm_prepare() functions
generate stack size warnings. The addition of 'struct resource' in commit
2500763dd3db ("powerpc: Use of_address_to_resource()") grew the stack size
and is blamed for the warnings. However, the real issue is there's no
reason the 'struct of_device_id immr_ids' DT match tables need to be on
the stack as they are constant. Declare them as static to move them off
the stack.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306130405.uTv5yOZD-lkp@intel.com/
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230614171724.2403982-1-robh@kernel.org
|
|
"ranges" is a standard property, and we have common helper functions
for parsing it, so let's use the for_each_of_range() iterator.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230609183232.1767050-1-robh@kernel.org
|
|
Replace open coded reading of CPU nodes' "reg" properties with
of_get_cpu_hwid() dedicated for this purpose.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230319145931.65499-1-robh@kernel.org
|
|
The MPC8541/8548/8555 Configurable Development System (CDS) were the
vehicle used to provide evaluation of the 1st e500-v2 CPUs around 2007.
Similar to the earlier MPC83xx-MDS systems we removed, the "brains"
exist on a PCI-X card, but additional connectors exist to the right of
the PCI-X slot, two structural metal pins are used to provide stability
in a vertical ATX mounting, and the CPU is now on a daughter-card vs. a
clamped down BGA.
Given the extra complexity and risk of connector damage, the 8548CDS
I had access to came pre-assembled in a basic white Antec case common
for that era, and I'm inclined to assume that was the default.
Power was typical "Pentium4" 2005 ATX - the main 20 pin connector went
to the PCI ATX form factor backplane, and the 4 pin black/yellow went
to the CPU card.
Like previous evaluation boards, they attempted to provide break-out
connectors for as many features as possible, and that made for a fairly
complex looking system.
In any case, these are over 15 years old, and fairly complex systems,
originally made for a small group of industry related people, and made
for use where quiet fan operation wasn't important. Given that, it
makes sense to remove support from them in 2023.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230620043300.197546-3-paul.gortmaker@windriver.com
|
|
Based on the revision history in the manual(s), these e500-v1
platforms were first available around 2002.
Like a lot of evaluation boards, they attempted to provide break-out
connectors for all possible features, and that combined with four
PCI-X slots (and the age/era) meant for a considerably large board.
As I recall it, from a Linux point of view, the biggest difference
between 8540 and 8560 was in the UART implementation, and that is
reflected in a diff of the defconfigs.
In any case, these are over 20 years old, and by today's standards
only have a small amount of DDR1 memory, and were not widely available.
Given that, it makes sense to remove support from them in 2023.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230620043300.197546-2-paul.gortmaker@windriver.com
|
|
Currently pointer iov is being dereferenced before the null check of iov
which can lead to null pointer dereference errors. Fix this by moving the
iov null check before the dereferencing.
Detected using cppcheck static analysis:
linux/arch/powerpc/platforms/powernv/pci-sriov.c:597:12: warning: Either
the condition '!iov' is redundant or there is possible null pointer
dereference: iov. [nullPointerRedundantCheck]
num_vfs = iov->num_vfs;
^
Fixes: 052da31d45fc ("powerpc/powernv/sriov: De-indent setup and teardown")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230608095849.1147969-1-colin.i.king@gmail.com
|
|
The refcount on mm is dropped before the coprocessor is detached.
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Fixes: 7bc6f71bdff5f ("powerpc/vas: Define and use common vas_window struct")
Fixes: b22f2d88e435c ("powerpc/pseries/vas: Integrate API with open/close windows")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230607101024.14559-1-npiggin@gmail.com
|
|
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230525205622.734093-1-u.kleine-koenig@pengutronix.de
|
|
Do a search and replace of:
- NMI_WATCHDOG_ENABLED => WATCHDOG_HARDLOCKUP_ENABLED
- SOFT_WATCHDOG_ENABLED => WATCHDOG_SOFTOCKUP_ENABLED
- watchdog_nmi_ => watchdog_hardlockup_
- nmi_watchdog_available => watchdog_hardlockup_available
- nmi_watchdog_user_enabled => watchdog_hardlockup_user_enabled
- soft_watchdog_user_enabled => watchdog_softlockup_user_enabled
- NMI_WATCHDOG_DEFAULT => WATCHDOG_HARDLOCKUP_DEFAULT
Then update a few comments near where names were changed.
This is specifically to make it less confusing when we want to introduce
the buddy hardlockup detector, which isn't using NMIs. As part of this,
we sanitized a few names for consistency.
[trix@redhat.com: make variables static]
Link: https://lkml.kernel.org/r/20230525162822.1.I0fb41d138d158c9230573eaa37dc56afa2fb14ee@changeid
Link: https://lkml.kernel.org/r/20230519101840.v5.12.I91f7277bab4bf8c0cb238732ed92e7ce7bbd71a6@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Colin Cross <ccross@android.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When CONFIG_SMP is not set, CONFIG_BROKEN_ON_SMP is set, and
CONFIG_PCI is not set, there can be a kconfig warning:
WARNING: unmet direct dependencies detected for PPC_INDIRECT_PCI
Depends on [n]: PCI [=n]
Selected by [y]:
- MPC10X_BRIDGE [=y]
To fix that, make the selects of MPC10X_BRIDGE be conditional
on PCI and use "imply" instead of "select".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au> # use "imply"
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230521225103.19197-1-rdunlap@infradead.org
|
|
Merge our fixes branch, in particular to bring in the change to
arch/powerpc/boot/Makefile, which is depended upon by a subsequent
series.
|
|
Remove all unused defines, and just use the expanded versions for
the SCSI disk majors.
I've decided to keep Root_RAM0 even if it could be expanded as there
is a lot of special casing for it in the init code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently in tce_freemulti_pSeriesLP() there is no limit on how many
TCEs are passed to the H_STUFF_TCE hcall. This has not caused an issue
until now, but newer firmware releases have started enforcing a limit of
512 TCEs per call.
The limit is correct per the specification (PAPR v2.12 § 14.5.4.2.3).
The code has been in it's current form since it was initially merged.
Cc: stable@vger.kernel.org
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
[mpe: Tweak change log wording & add PAPR reference]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230525143454.56878-1-gbatra@linux.vnet.ibm.com
|
|
For an SR-IOV device, while enabling DDW, a new table is created and
added at index 1 in the group. In the below 2 scenarios, the table is
incorrectly referenced at index 0 (which is where the table is for
default DMA window).
1. When adding DDW
This issue is exposed with "slub_debug". Error thrown out from
dma_iommu_dma_supported()
Warning: IOMMU offset too big for device mask
mask: 0xffffffff, table offset: 0x800000000000000
2. During Dynamic removal of the PCI device.
Error is from iommu_tce_table_put() since a NULL table pointer is
passed in.
Fixes: 381ceda88c4c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230505184701.91613-1-gbatra@linux.vnet.ibm.com
|
|
Now that power calls iommu_device_register() and populates its groups
using iommu_ops->device_group it should not be calling
iommu_group_remove_device().
The core code owns the groups and all the other related iommu data, it
will clean it up automatically.
Remove the bus notifiers and explicit calls to
iommu_group_remove_device().
Fixes: a940904443e4 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/0-v1-1421774b874b+167-ppc_device_group_jgg@nvidia.com
|
|
While mpc5200b.dtsi contains a device that this driver can bind to, the
only purpose of a bound device is to be used by the four exported functions
mpc52xx_lpbfifo_submit(), mpc52xx_lpbfifo_abort(), mpc52xx_lpbfifo_poll()
and mpc52xx_lpbfifo_start_xfer(). However there are no callers to this
function and so the driver is effectively superfluous and can be deleted.
Also drop some defines and a struct from <asm/mpc52xx.h> that are unused
now together with the declarations of the four mentioned functions.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230413061642.kqkor4wkt7lp2mhp@pengutronix.de
|
|
For ppc64, gcc with W=1 reports
arch/powerpc/platforms/cell/spu_base.c:330:17: error:
suggest braces around empty body in an 'if' statement [-Werror=empty-body]
330 | ;
| ^
arch/powerpc/platforms/cell/spu_base.c:333:17: error:
suggest braces around empty body in an 'if' statement [-Werror=empty-body]
333 | ;
| ^
These if-checks do not do anything so remove them.
Signed-off-by: Tom Rix <trix@redhat.com>
Fixes: 67207b9664a8 ("[PATCH] spufs: The SPU file system, base")
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230428221240.2679194-1-trix@redhat.com
|
|
Drop an unused and empty "config" entry for PPC_86xx.
It has no keyword entries under it and the following line's
"menuconfig" for the same Kconfig symbol is what kconfig uses.
Fixes: d8267c1a3686 ("powerpc: Add 82xx/83xx/86xx to 6xx Multiplatform")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230429043503.19385-1-rdunlap@infradead.org
|
|
BACKGROUND
==========
When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().
However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c74 ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.
While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.
This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.
WHAT TO LOOK FOR
================
The conversions are from
alloc_workqueue(WQ_UNBOUND | flags, 1, args..)
to
alloc_ordered_workqueue(flags, args...)
which don't cause any functional changes. If you know that fully ordered
execution is not ncessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.
If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.
As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
|
|
Neither FSL_SOC_BOOKE nor PPC_86xx enables CONFIG_PCI by
default, so it may be unset in some randconfigs.
When that happens, FSL_ULI1575 may be set when it should not be
since it is a PCI driver. When it is set, there are 3 kconfig
warnings and a slew of build errors
WARNING: unmet direct dependencies detected for PCI_QUIRKS
Depends on [n]: PCI [=n]
Selected by [y]:
- FSL_PCI [=y]
WARNING: unmet direct dependencies detected for GENERIC_ISA_DMA
Depends on [n]: ISA_DMA_API [=n]
Selected by [y]:
- FSL_ULI1575 [=y] && (FSL_SOC_BOOKE [=n] || PPC_86xx [=y])
WARNING: unmet direct dependencies detected for PPC_INDIRECT_PCI
Depends on [n]: PCI [=n]
Selected by [y]:
- FSL_PCI [=y]
and 30+ build errors.
Fixes: 22fdf79171e8 ("powerpc/fsl_uli1575: Allow to disable FSL_ULI1575 support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230429043519.19807-1-rdunlap@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for building the kernel using PC-relative addressing on
Power10.
- Allow HV KVM guests on Power10 to use prefixed instructions.
- Unify support for the P2020 CPU (85xx) into a single machine
description.
- Always build the 64-bit kernel with 128-bit long double.
- Drop support for several obsolete 2000's era development boards as
identified by Paul Gortmaker.
- A series fixing VFIO on Power since some generic changes.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Andrew Donnellan, Benjamin Gray, Bo Liu,
Christophe Leroy, Dan Carpenter, David Binderman, Ira Weiny, Joel
Stanley, Kajol Jain, Kautuk Consul, Liang He, Luis Chamberlain, Masahiro
Yamada, Michael Neuling, Nathan Chancellor, Nathan Lynch, Nicholas
Miehlbradt, Nicholas Piggin, Nick Desaulniers, Nysal Jan K.A, Pali
Rohár, Paul Gortmaker, Paul Mackerras, Petr Vaněk, Randy Dunlap, Rob
Herring, Sachin Sant, Sean Christopherson, Segher Boessenkool, and
Timothy Pearson.
* tag 'powerpc-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits)
powerpc/64s: Disable pcrel code model on Clang
powerpc: Fix merge conflict between pcrel and copy_thread changes
powerpc/configs/powernv: Add IGB=y
powerpc/configs/64s: Drop JFS Filesystem
powerpc/configs/64s: Use EXT4 to mount EXT2 filesystems
powerpc/configs: Make pseries_defconfig an alias for ppc64le_guest
powerpc/configs: Make pseries_le an alias for ppc64le_guest
powerpc/configs: Incorporate generic kvm_guest.config into guest configs
powerpc/configs: Add IBMVETH=y and IBMVNIC=y to guest configs
powerpc/configs/64s: Enable Device Mapper options
powerpc/configs/64s: Enable PSTORE
powerpc/configs/64s: Enable VLAN support
powerpc/configs/64s: Enable BLK_DEV_NVME
powerpc/configs/64s: Drop REISERFS
powerpc/configs/64s: Use SHA512 for module signatures
powerpc/configs/64s: Enable IO_STRICT_DEVMEM
powerpc/configs/64s: Enable SCHEDSTATS
powerpc/configs/64s: Enable DEBUG_VM & other options
powerpc/configs/64s: Enable EMULATED_STATS
powerpc/configs/64s: Enable KUNIT and most tests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP cross-CPU function-call updates from Ingo Molnar:
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some major
architectures it's not even consistently available.
* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
trace,smp: Trace all smp_function_call*() invocations
trace: Add trace_ipi_send_cpu()
sched, smp: Trace smp callback causing an IPI
smp: reword smp call IPI comment
treewide: Trace IPIs sent via smp_send_reschedule()
irq_work: Trace self-IPIs sent via arch_irq_work_raise()
smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
sched, smp: Trace IPIs sent via send_call_function_single_ipi()
trace: Add trace_ipi_send_cpumask()
kernel/smp: Make csdlock_debug= resettable
locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
locking/csd_lock: Remove added data from CSD lock debugging
locking/csd_lock: Add Kconfig option for csd_debug default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A fairly standard release for SPI with the exception of a change to
the API for specifying chip selects done in preparation for supporting
devices with more than one chip select, this required some mechanical
changes throughout the tree which have been cooking in -next happily
for a while.
There's also a new API to allow us to support TPM chips on half duplex
controllers.
Summary:
- Refactoring in preparation for supporting multiple chip selects for
a single device, needed by some flash devices, which required a
change in the SPI device API visible throughout the tree
- Support for hardware assisted interaction with SPI TPMs on half
duplex controllers, implemented on nVidia Tedra210 QuadSPI
- Optimisation for large transfers on fsl-cpm devices
- Cleanups around device property use which fix some sisues with
fwnode
- Use of both void remove() and devm_platform_.*ioremap_resource()
- Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
Intel MetorLake-S and StarFive J7110 QuadSPI"
* tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits)
spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: tegra210-quad: Enable TPM wait polling
spi: Add TPM HW flow flag
spi: bcm63xx: remove PM_SLEEP based conditional compilation
spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: spi-cadence: Add support for Slave mode
spi: spi-cadence: Switch to spi_controller structure
spi: cadence-quadspi: fix suspend-resume implementations
spi: dw: Add support for AMD Pensando Elba SoC
spi: dw: Add AMD Pensando Elba SoC SPI Controller
spi: cadence-quadspi: Disable the SPI before reconfiguring
spi: cadence-quadspi: Update the read timeout based on the length
spi: spi-loopback-test: Add module param for iteration length
spi: add support for Amlogic A1 SPI Flash Controller
dt-bindings: spi: add Amlogic A1 SPI controller
spi: fsl-spi: No need to check transfer length versus word size
spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void
spi: fsl-cpm: Use 16 bit mode for large transfers with even size
spi: fsl-spi: Re-organise transfer bits_per_word adaptation
spi: fsl-spi: Fix CPM/QE mode Litte Endian
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including
addition of a no-DSP mode for bringup, HDA MLink and extensions to
the IPC4 protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas
R-Car Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements"
* tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (586 commits)
ALSA: emu10k1: use high-level I/O in set_filterQ()
ALSA: emu10k1: use high-level I/O functions also during init
ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put()
ALSA: emu10k1: don't stop DSP in _snd_emu10k1_{,audigy_}init_efx()
ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP
ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards
ALSA: emu10k1: fixup DSP defines
ALSA: emu10k1: pull in some register definitions from kX-project
ALSA: emu10k1: remove some bogus defines
ALSA: emu10k1: eliminate some unused defines
ALSA: emu10k1: fix lineup of EMU_HANA_* defines
ALSA: emu10k1: comment updates
ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards
ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field
ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init()
ALSA: emu10k1: minor optimizations
ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init()
ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads
ALSA: emu10k1: remove apparently pointless FPGA reads
ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Add pci_dev_for_each_resource() and pci_bus_for_each_resource()
iterators
PCIe native device hotplug:
- Fix AB-BA deadlock between reset_lock and device_lock
Power management:
- Wait longer for devices to become ready after resume (as we do for
reset) to accommodate Intel Titan Ridge xHCI devices
- Extend D3hot delay for NVIDIA HDA controllers to avoid
unrecoverable devices after a bus reset
Error handling:
- Clear PCIe Device Status after EDR since generic error recovery now
only clears it when AER is native
ASPM:
- Work around Chromebook firmware defect that clobbers Capability
list (including ASPM L1 PM Substates Cap) when returning from
D3cold to D0
Freescale i.MX6 PCIe controller driver:
- Install imprecise external abort handler only when DT indicates
PCIe support
Freescale Layerscape PCIe controller driver:
- Add ls1028a endpoint mode support
Qualcomm PCIe controller driver:
- Add SM8550 DT binding and driver support
- Add SDX55 DT binding and driver support
- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3
- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0
- Add DT "mhi" register region for supported SoCs
- Expose link transition counts via debugfs to help debug low power
issues
- Support system suspend and resume; reduce interconnect bandwidth
and turn off clock and PHY if there are no active devices
- Enable async probe by default to reduce boot time
Miscellaneous:
- Sort controller Kconfig entries by vendor"
* tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits)
PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
PCI: mobiveil: Sort Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: Sort controller Kconfig entries by vendor
PCI: Use consistent controller Kconfig menu entry language
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: Use of_property_present() for testing DT property presence
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have some new drivers, significant refactoring of existing intel
platforms, lots of improvements all around, mass conversion to using
immutable irqchips by drivers that had not been converted individually
yet and some changes in the core library code.
Summary:
New drivers:
- add a driver for the Loongson GPIO controller
- add a driver for the fxl6408 I2C GPIO expander
- add a GPIO module containing code common for Intel Elkhart Lake and
Merrifield platforms
- add a driver for the Intel Elkhart Lake platform reusing the code
from the intel tangier library
GPIOLIB core:
- GPIO ACPI improvements
- simplify gpiochip_add_data_with_keys() fwnode handling
- cleanup header inclusions (remove unneeded ones, order the rest
alphabetically)
- remove duplicate code (reuse krealloc() instead of open-coding it,
drop a duplicated check in gpiod_find_and_request())
- reshuffle the code to remove unnecessary forward declarations
- coding style cleanups and improvements
- add a helper for accessing device fwnodes
- small updates in docs
Driver improvements:
- convert all remaining GPIO irqchip drivers to using immutable
irqchips
- drop unnecessary of_match_ptr() macro expansions
- shrink the code in gpio-merrifield significantly by reusing the
code from gpio-tangier + minor tweaks to the driver code
- remove MODULE_LICENSE() from drivers that can only be built-in
- add device-tree support to gpio-loongson1
- use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24
- minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194,
gpio-omap, gpio-aspeed, gpio-raspberrypi-exp
- shrink code in gpio-ich and gpio-pxa
- Kconfig tweak for gpio-pmic-eic-sprd"
* tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (99 commits)
gpio: gpiolib: Simplify gpiochip_add_data_with_key() fwnode
gpiolib: Add gpiochip_set_data() helper
gpiolib: Move gpiochip_get_data() higher in the code
gpiolib: Check array_info for NULL only once in gpiod_get_array()
gpiolib: Replace open coded krealloc()
gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xNU
gpiolib: acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data()
gpiolib: acpi: use the fwnode in acpi_gpiochip_find()
gpio: mm-lantiq: Fix typo in the newly added header filename
sh: mach-x3proto: Add missing #include <linux/gpio/driver.h>
powerpc/40x: Add missing select OF_GPIO_MM_GPIOCHIP
gpio: xlp: Convert to immutable irq_chip
gpio: xilinx: Convert to immutable irq_chip
gpio: xgs-iproc: Convert to immutable irq_chip
gpio: visconti: Convert to immutable irq_chip
gpio: tqmx86: Convert to immutable irq_chip
gpio: thunderx: Convert to immutable irq_chip
gpio: stmpe: Convert to immutable irq_chip
gpio: siox: Convert to immutable irq_chip
gpio: rda: Convert to immutable irq_chip
...
|
|
With the two platforms depending on this shared code, and no others,
we can remove the orphaned code and Kconfigs
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230224204959.17425-4-paul.gortmaker@windriver.com
|
|
Based on documentation revision dates, this MPC82xx pq2fads system
predates the MPC8272-ADS variant by about a year and only has 1/2
the amount of RAM (32MB) -- largely making it useless with a modern
v6.x kernel from today.
Similar to the MPC8272-ADS the pq2fads also supported other 82xx CPU
variants, had 8MB flash, and like the 8272 ADS platform, was on a fairly
large PCB in order to have space for breakout connectors for all features.
These 82xx platforms are two decades old, and originally made for a
small group of industry related people in order to assist in new OEM
board designs. Given that, it makes sense to remove support today.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230224204959.17425-3-paul.gortmaker@windriver.com
|
|
The MPC8272-ADS also supported other 82xx CPU variants, had 64MB RAM,
8MB flash, and like the 85xx ADS platforms, was on a fairly large PCB
in order to have space for breakout connectors for all the features.
These 82xx platforms are two decades old, and originally made for a
small group of industry related people in order to assist in new OEM
board designs. Given that, it makes sense to remove support today.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230224204959.17425-2-paul.gortmaker@windriver.com
|
|
This evaluation platform was essentially a single core 8641 with
integrated graphics/display support - in an effort to reduce chip count
on kiosk and similar applications.
Compared to other evaluation platforms considered for removal in other
recent commits, this platform was relatively rare. Unlike all the other
10+ platforms, I couldn't find any documentation on it - just a link to
downloading the 2007 era BSP in "LTIB" format as was done back then.
With all that in mind, it seems prudent to remove it here in 2023.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
[mpe: Drop stale reference to MPC8610_HPCD in 86xx/Kconfig]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230225201318.3682-4-paul.gortmaker@windriver.com
|
|
There is no denying that this was an interesting platform in its day.
Access to a SMP powerpc platform became a bit more obtainable for folks
in the BSP industry in the 2007 era, thanks to this platform.
Add to that the move to the black Antec case vs. the generic white 2005
era case of the MPC8548CDS or the retro 1950s 1/2 height horizontal case
of the HPC II, and it was pretty interesting to people like myself then.
However, like all the other evaluation platforms, the overall system
was complex out of necessity, as it tried to showcase all possible
features and use-cases. That included an AMP option, where you could run
two bootloaders and two kernels over two serial consoles. Peripheral
sharing got a bit more tricky when you got to the hard disk and similar.
In any case we still have the same circumstance. A relatively rare and
expensive evaluation platform that is now 15+ years old and not out there
in large numbers in the general public. Removal in 2023 just makes sense.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230225201318.3682-3-paul.gortmaker@windriver.com
|
|
This was an interesting platform - it was the 1st instance of a
respin of earlier 130nm 74xx CPUs on 90nm and systems using MPC7448
were positioned as a rack server platform solution.
Given that, the evaluation platform (at least the one I had) was shipped
in a horizontal 1/2 height Antec desktop case with retro styling and
colours, despite the fact the docs explicitly stated that the HPC II is
not a desktop machine (noting it had no gfx or legacy PC I/O support).
Historic trivia aside, this was the 1st introduction of the e600
procfam as an evolution from the earlier G4.
However even with the claim to being "1st e600" it seems the 2005+
era was turning its attention to multicore support and from my memory
this poor guy was quickly overshadowed by the dual core MPC8641D.
All that aside, we are once again looking at 15+ year old evaluation
platforms that were not widely distributed, so 2023 removal makes sense.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230225201318.3682-2-paul.gortmaker@windriver.com
|
|
This final variant in the e300 family of Modular Development System
(MDS) in this series was actually aimed at feature reduction - things
like floating point and ethernet were removed in order to make for a
lower power and lower cost system.
Like all the MDS systems, it was meant as a vehicle to get the CPU out
early to hardware OEMs so software and board development could take place
in parallel.
These were made in limited numbers and availability preference was given
to partners who were planning to make their own boards.
Given that the whole reason for existence was to assist in enabling new
board designs [not happening for 10+ years], and that they weren't
generally available, and that the hardware wasn't really hobbyist friendly
even for retro computing, it makes sense to retire the support for this
particular platform.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
[mpe: Drop stale reference to MPC832x_MDS in arch/powerpc/boot/Makefile]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220115913.25811-5-paul.gortmaker@windriver.com
|
|
This next evolutionary step in the e300 family of Modular Development
System (MDS) still has, at its core component, a full length card with a
PCI edge. No case. Serial and network connectors were on card, so it
could optionally be fitted with plastic stand-offs and run stand-alone
off a power brick.
This is very similar to the MPC834x_MDS and MPC836x_MDS removed in the
prior commits, but with this board variant as yet another evolutionary
step. SATA and PCI-e were now available. But overall the form factor
and design goals were unchanged.
Like all the MDS systems, it was meant as a vehicle to get the CPU out
early to hardware OEMs so software and board development could take place
in parallel.
These were made in limited numbers and availability preference was given
to partners who were planning to make their own boards.
Given that the whole reason for existence was to assist in enabling new
board designs [not happening for 10+ years], and that they weren't
generally available, and that the hardware wasn't really hobbyist friendly
even for retro computing, it makes sense to retire the support for this
particular platform.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220115913.25811-4-paul.gortmaker@windriver.com
|
|
This 2006 era Modular Development System (MDS) has, at its core component,
a full length card with a PCI edge. No case. Serial and network
connectors were on card, so it could optionally be fitted with plastic
stand-offs and run stand-alone off a power brick.
This is very similar to the MPC834x_MDS removed in the prior commit, but
with this board variant as an evolutionary step. DDR2 was now an option,
and the card edge was revised down to PCI-32 as PCI-64 never got traction.
But overall the form factor and design goals were unchanged.
Like all the MDS systems, it was meant as a vehicle to get the CPU out
early to hardware OEMs so software and board development could take place
in parallel.
To that end, the BGA CPU was held in place with a mechanical spring loaded
pressure assembly (vs. solder) so that early rev silicon could be replaced
in the field. Not for COTS deployment!
These were made in limited numbers and availability preference was given
to partners who were planning to make their own boards.
Given that the whole reason for existence was to assist in enabling new
board designs [not happening for 10+ years], and that they weren't
generally available, and that the hardware wasn't really hobbyist friendly
even for retro computing, it makes sense to retire the support for this
particular platform.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
[mpe: Drop stale reference to MPC836x_MDS in arch/powerpc/boot/Makefile]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220115913.25811-3-paul.gortmaker@windriver.com
|
|
This 2006 era Modular Development System (MDS) has, at its core
component, a full length card with a PCI-64 edge. No case. Serial
and network connectors were on card, so it could optionally be fitted
with plastic stand-offs and run stand-alone off a power brick.
Like all the MDS systems, it was meant as a vehicle to get the CPU
out early to hardware OEMs so software and board development could
take place in parallel.
To that end, the BGA CPU was held in place with a mechanical spring
loaded pressure assembly (vs. solder) so that early rev silicon could
be replaced in the field. Not for COTS deployment!
These were made in limited numbers and availability preference was
given to partners who were planning to make their own boards, like
our WR SBC8349 [since retired in v4.18 (2017, commit 3bc6cf5a86e5)]
Given that the whole reason for existence was to assist in enabling
new board designs [not happening for 10+ years], and that they weren't
generally available, and that the hardware wasn't really hobbyist
friendly even for retro computing, it makes sense to retire the
support for this platform.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220115913.25811-2-paul.gortmaker@windriver.com
|
|
Add a firmware feature flag, FW_FEATURE_PLPKS, to indicate availability of
Platform KeyStore related hcalls.
Check this flag in plpks_is_available() and pseries_plpks_init() before
trying to make an hcall.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230224041012.772648-1-ajd@linux.ibm.com
|
|
PC-Relative or PCREL addressing is an extension to the ELF ABI which
uses Power ISA v3.1 PC-relative instructions to calculate addresses,
rather than the traditional TOC scheme.
Add an option to build vmlinux using pcrel addressing. Modules continue
to use TOC addressing.
- TOC address helpers and r2 are poisoned with -1 when running vmlinux.
r2 could be used for something useful once things are ironed out.
- Assembly must call C functions with @notoc annotation, or the linker
complains aobut a missing nop after the call. This is done with the
CFUNC macro introduced earlier.
- Boot: with the exception of prom_init, the execution branches to the
kernel virtual address early in boot, before any addresses are
generated, which ensures 34-bit pcrel addressing does not miss the
high PAGE_OFFSET bits. TOC relative addressing has a similar
requirement. prom_init does not go to the virtual address and its
addresses should not carry over to the post-prom kernel.
- Ftrace trampolines are converted from TOC addressing to pcrel
addressing, including module ftrace trampolines that currently use the
kernel TOC to find ftrace target functions.
- BPF function prologue and function calling generation are converted
from TOC to pcrel.
- copypage_64.S has an interesting problem, prefixed instructions have
alignment restrictions so the linker can add padding, which makes the
assembler treat the difference between two local labels as
non-constant even if alignment is arranged so padding is not required.
This may need toolchain help to solve nicely, for now move the prefix
instruction out of the alternate patch section to work around it.
This reduces kernel text size by about 6%.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408021752.862660-6-npiggin@gmail.com
|
|
This macro is to be used in assembly where C functions are called.
pcrel addressing mode requires branches to functions with a
localentry value of 1 to have either a trailing nop or @notoc.
This macro permits the latter without changing callers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add dummy definitions to fix selftests build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408021752.862660-5-npiggin@gmail.com
|
|
Add an option to build kernel and module with prefixed instructions if
the CPU and toolchain support it.
This is not related to kernel support for userspace execution of
prefixed instructions.
Building with prefixed instructions breaks some extended inline asm
memory addressing, for example it will provide immediates that exceed
the range of simple load/store displacement. Whether this is a
toolchain or a kernel asm problem remains to be seen. For now, these
are replaced with simpler and less efficient direct register addressing
when compiling with prefixed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408021752.862660-4-npiggin@gmail.com
|
|
Generic unified P2020 machine description which supports all P2020-based
boards is now in separate file p2020.c. So create a separate config option
CONFIG_PPC_P2020 for it.
Previously machine descriptions for P2020 boards were enabled by
CONFIG_MPC85xx_DS or CONFIG_MPC85xx_RDB option. So set CONFIG_PPC_P2020 to
be enabled by default when one of those option is enabled.
This allows to compile support for P2020 boards without need to have
enabled support for older mpc85xx boards. And to compile kernel for old
mpc85xx boards without having enabled support for new P2020 boards.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-13-pali@kernel.org
|
|
Combine machine descriptions and code of all P2020 boards into just one
generic unified P2020 machine description. This allows kernel to boot on
any P2020-based board with P2020 DTS file without need to patch kernel and
define a new machine description in 85xx powerpc platform directory.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-12-pali@kernel.org
|
|
Make just one .setup_arch and one .init_IRQ callback implementation for all
P2020 board code. This deduplicate repeated and same code.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-11-pali@kernel.org
|
|
In order to share mpc85xx i8259 code between DS and P2020.
Prefix i8259 debug and error messages by i8259 word.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix some coding style warnings in the moved code]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-10-pali@kernel.org
|
|
This moves P2020 RDB machine descriptions into new p2020.c source file.
This is preparation for code de-duplication and providing one unified
machine description for all P2020 boards.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-9-pali@kernel.org
|
|
This moves P2020 DS machine descriptions into new p2020.c source file.
This is preparation for code de-duplication and providing one unified
machine description for all P2020 boards.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-8-pali@kernel.org
|
|
mpc85xx_qe_par_io_init() is a stub when CONFIG_QUICC_ENGINE is not set.
CONFIG_UCC_GETH and CONFIG_SERIAL_QE depend on CONFIG_QUICC_ENGINE.
Remove #ifdef CONFIG_QUICC_ENGINE
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-7-pali@kernel.org
|
|
All necessary items are declared all the time, no need to use
a #ifdef CONFIG_PPC_I8259.
Refactor CONFIG_PPC_I8259 actions into a dedicated init function.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-6-pali@kernel.org
|
