Age | Commit message (Collapse) | Author |
|
During early init CMA_MIN_ALIGNMENT_BYTES can be PAGE_SIZE,
since pageblock_order is still zero and it gets initialized
later during initmem_init() e.g.
setup_arch() -> initmem_init() -> sparse_init() -> set_pageblock_order()
One such use case where this causes issue is -
early_setup() -> early_init_devtree() -> fadump_reserve_mem() -> fadump_cma_init()
This causes CMA memory alignment check to be bypassed in
cma_init_reserved_mem(). Then later cma_activate_area() can hit
a VM_BUG_ON_PAGE(pfn & ((1 << order) - 1)) if the reserved memory
area was not pageblock_order aligned.
Fix it by moving the fadump_cma_init() after initmem_init(),
where other such cma reservations also gets called.
<stack trace>
==============
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10010
flags: 0x13ffff800000000(node=1|zone=0|lastcpupid=0x7ffff) CMA
raw: 013ffff800000000 5deadbeef0000100 5deadbeef0000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(pfn & ((1 << order) - 1))
------------[ cut here ]------------
kernel BUG at mm/page_alloc.c:778!
Call Trace:
__free_one_page+0x57c/0x7b0 (unreliable)
free_pcppages_bulk+0x1a8/0x2c8
free_unref_page_commit+0x3d4/0x4e4
free_unref_page+0x458/0x6d0
init_cma_reserved_pageblock+0x114/0x198
cma_init_reserved_areas+0x270/0x3e0
do_one_initcall+0x80/0x2f8
kernel_init_freeable+0x33c/0x530
kernel_init+0x34/0x26c
ret_from_kernel_user_thread+0x14/0x1c
Fixes: 11ac3e87ce09 ("mm: cma: use pageblock_order as the single alignment")
Suggested-by: David Hildenbrand <david@redhat.com>
Reported-by: Sachin P Bappalige <sachinpb@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/3ae208e48c0d9cefe53d2dc4f593388067405b7d.1729146153.git.ritesh.list@gmail.com
|
|
This patch refactors all CMA related initialization and alignment code
to within fadump_cma_init() which gets called in the end. This also means
that we keep [reserve_dump_area_start, boot_memory_size] page aligned
during fadump_reserve_mem(). Then later in fadump_cma_init() we extract the
aligned chunk and provide it to CMA. This inherently also fixes an issue in
the current code where the reserve_dump_area_start is not aligned
when the physical memory can have holes and the suitable chunk starts at
an unaligned boundary.
After this we should be able to call fadump_cma_init() independently
later in setup_arch() where pageblock_order is non-zero.
Suggested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/805d6b900968fb9402ad8f4e4775597db42085c4.1729146153.git.ritesh.list@gmail.com
|
|
We anyway don't use any return values from fadump_cma_init(). Since
fadump_reserve_mem() from where fadump_cma_init() gets called today,
already has the required checks.
This patch makes this function return type as void. Let's also handle
extra cases like return if fadump_supported is false or dump_active, so
that in later patches we can call fadump_cma_init() separately from
setup_arch().
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/a2afc3d6481a87a305e89cfc4a3f3d2a0b8ceab3.1729146153.git.ritesh.list@gmail.com
|
|
Use the irq_get_nr_irqs() function instead of the global variable
'nr_irqs'. Prepare for changing 'nr_irqs' from an exported global
variable into a variable with file scope.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/all/20241015190953.1266194-5-bvanassche@acm.org
|
|
On powerpc64 as shown below by readelf, vDSO functions symbols have
type NOTYPE.
$ powerpc64-linux-gnu-readelf -a arch/powerpc/kernel/vdso/vdso64.so.dbg
ELF Header:
Magic: 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00
Class: ELF64
Data: 2's complement, big endian
Version: 1 (current)
OS/ABI: UNIX - System V
ABI Version: 0
Type: DYN (Shared object file)
Machine: PowerPC64
Version: 0x1
...
Symbol table '.dynsym' contains 12 entries:
Num: Value Size Type Bind Vis Ndx Name
...
1: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
...
4: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15
5: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
Symbol table '.symtab' contains 56 entries:
Num: Value Size Type Bind Vis Ndx Name
...
45: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15
46: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __kernel_getcpu
47: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_getres
To overcome that, commit ba83b3239e65 ("selftests: vDSO: fix vDSO
symbols lookup for powerpc64") was applied to have selftests also
look for NOTYPE symbols, but the correct fix should be to flag VDSO
entry points as functions.
The original commit that brought VDSO support into powerpc/64 has the
following explanation:
Note that the symbols exposed by the vDSO aren't "normal" function symbols, apps
can't be expected to link against them directly, the vDSO's are both seen
as if they were linked at 0 and the symbols just contain offsets to the
various functions. This is done on purpose to avoid a relocation step
(ppc64 functions normally have descriptors with abs addresses in them).
When glibc uses those functions, it's expected to use it's own trampolines
that know how to reach them.
The descriptors it's talking about are the OPD function descriptors
used on ABI v1 (big endian). But it would be more correct for a text
symbol to have type function, even if there's no function descriptor
for it.
glibc has a special case already for handling the VDSO symbols which
creates a fake opd pointing at the kernel symbol. So changing the VDSO
symbol type to function shouldn't affect that.
For ABI v2, there is no function descriptors and VDSO functions can
safely have function type.
So lets flag VDSO entry points as functions and revert the
selftest change.
Link: https://github.com/mpe/linux-fullhistory/commit/5f2dd691b62da9d9cc54b938f8b29c22c93cb805
Fixes: ba83b3239e65 ("selftests: vDSO: fix vDSO symbols lookup for powerpc64")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-By: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/b6ad2f1ee9887af3ca5ecade2a56f4acda517a85.1728512263.git.christophe.leroy@csgroup.eu
|
|
VDSO time functions do not call any other function, so they don't
need to save/restore LR. However, retrieving the address of VDSO data
page requires using LR hence saving then restoring it, which can be
heavy on some CPUs. On the other hand, VDSO functions on powerpc are
not standard functions and require a wrapper function to call C VDSO
functions. And that wrapper has to save and restore LR in order to
call the C VDSO function, so retrieving VDSO data page address in that
wrapper doesn't require additional save/restore of LR.
For random VDSO functions it is a bit different. Because the function
calls __arch_chacha20_blocks_nostack(), it saves and restores LR.
Retrieving VDSO data page address can then be done there without
additional save/restore of LR.
So lets implement __arch_get_vdso_rng_data() and simplify the wrapper.
It starts paving the way for the day powerpc will implement a more
standard ABI for VDSO functions.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/a1a9bd0df508f1b5c04684b7366940577dfc6262.1727858295.git.christophe.leroy@csgroup.eu
|
|
The page containing VDSO time data is swapped with the one containing
TIME namespace data when a process uses a non-root time namespace.
For other data like powerpc specific data and RNG data, it means
tracking whether time namespace is the root one or not to know which
page to use.
Simplify the logic behind by moving time data out of first data page
so that the first data page which contains everything else always
remains the first page. Time data is in the second or third page
depending on selected time namespace.
While we are playing with get_datapage macro, directly take into
account the data offset inside the macro instead of adding that offset
afterwards.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/0557d3ec898c1d0ea2fc59fa8757618e524c5d94.1727858295.git.christophe.leroy@csgroup.eu
|
|
Since SLOB was removed and since
commit 6c6c47b063b5 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"),
it is not necessary to use call_rcu when the callback only performs
kmem_cache_free. Use kfree_rcu() directly.
The changes were made using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241013201704.49576-14-Julia.Lawall@inria.fr
|
|
When commit 38f7b7067dae ("powerpc/rtas: rtas_busy_delay() improvements")
was introduced, documentation about proper usage of sleep related functions
was outdated.
The commit message references the usage of a HZ=100 system. When using a
20ms sleep duration on such a system and therefore using msleep(), the
possible additional slack will be +10ms.
When the system is configured with HZ=100 the granularity of a jiffy and of
a bucket of the lowest timer wheel level is 10ms. To make sure a timer will
not expire early (when queueing of the timer races with an concurrent
update of jiffies), timers are always queued into the next bucket. This is
the reason for the maximal possible slack of 10ms.
fsleep() limits the maximal possible slack to 25% by making threshold
between usleep_range() and msleep() HZ dependent. As soon as the accuracy
of msleep() is sufficient, the less expensive timer list timer based
sleeping function is used instead of the more expensive hrtimer based
usleep_range() function. The udelay() will not be used in this specific
usecase as the lowest sleep length is larger than 1 millisecond.
Use fsleep() directly instead of using an own heuristic for the best
sleeping mechanism to use.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-13-dc8b907cb62f@linutronix.de
|
|
In opal_event_init() if request_irq() fails name is not freed, leading
to a memory leak. The code only runs at boot time, there's no way for a
user to trigger it, so there's no security impact.
Fix the leak by freeing name in the error path.
Reported-by: 2639161967 <2639161967@qq.com>
Closes: https://lore.kernel.org/linuxppc-dev/87wmjp3wig.fsf@mail.lhotse
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20240920093520.67997-1-mpe@ellerman.id.au
|
|
The VDSO implementation includes headers from outside of the
vdso/ namespace.
Introduce vdso/page.h to make sure that the generic library
uses only the allowed namespace.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Link: https://lore.kernel.org/all/20241014151340.1639555-3-vincenzo.frascino@arm.com
|
|
Since the generic VDSO clock mode storage is used, this header file is
unused and can be removed.
This avoids including a non-VDSO header while building the VDSO,
which can lead to compilation errors.
Also drop the comment which is out of date and in the wrong place.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-arch_update_vsyscall-v1-4-7fe5a3ea4382@linutronix.de
|
|
Most architectures use pt_regs within ftrace_regs making a lot of the
accessor functions just calls to the pt_regs internally. Instead of
duplication this effort, use a HAVE_ARCH_FTRACE_REGS for architectures
that have their own ftrace_regs that is not based on pt_regs and will
define all the accessor functions, and for the architectures that just use
pt_regs, it will leave it undefined, and the default accessor functions
will be used.
Note, this will also make it easier to add new accessor functions to
ftrace_regs as it will mean having to touch less architectures.
Cc: <linux-arch@vger.kernel.org>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/20241010202114.2289f6fd@gandalf.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # powerpc
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Konstantin reports the maintainer's address bounces.
There is no other maintainer and the driver is quite old.
There is a good chance nobody is using this driver any more.
Let's try to remove it completely, we can revert it back in
if someone complains.
Link: https://lore.kernel.org/20240925-bizarre-earwig-from-pluto-1484aa@lemu/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Denis Kirjanov <dkirjanov@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Following OOPS is encountered while loading test_bpf module
on powerpc 8xx:
[ 218.835567] BUG: Unable to handle kernel data access on write at 0xcb000000
[ 218.842473] Faulting instruction address: 0xc0017a80
[ 218.847451] Oops: Kernel access of bad area, sig: 11 [#1]
[ 218.852854] BE PAGE_SIZE=16K PREEMPT CMPC885
[ 218.857207] SAF3000 DIE NOTIFICATION
[ 218.860713] Modules linked in: test_bpf(+) test_module
[ 218.865867] CPU: 0 UID: 0 PID: 527 Comm: insmod Not tainted 6.11.0-s3k-dev-09856-g3de3d71ae2e6-dirty #1280
[ 218.875546] Hardware name: MIAE 8xx 0x500000 CMPC885
[ 218.880521] NIP: c0017a80 LR: beab859c CTR: 000101d4
[ 218.885584] REGS: cac2bc90 TRAP: 0300 Not tainted (6.11.0-s3k-dev-09856-g3de3d71ae2e6-dirty)
[ 218.894308] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 55005555 XER: a0007100
[ 218.901290] DAR: cb000000 DSISR: c2000000
[ 218.901290] GPR00: 000185d1 cac2bd50 c21b9580 caf7c030 c3883fcc 00000008 cafffffc 00000000
[ 218.901290] GPR08: 00040000 18300000 20000000 00000004 99005555 100d815e ca669d08 00000369
[ 218.901290] GPR16: ca730000 00000000 ca2c004c 00000000 00000000 0000035d 00000311 00000369
[ 218.901290] GPR24: ca732240 00000001 00030ba3 c3800000 00000000 00185d48 caf7c000 ca2c004c
[ 218.941087] NIP [c0017a80] memcpy+0x88/0xec
[ 218.945277] LR [beab859c] test_bpf_init+0x22c/0x3c90 [test_bpf]
[ 218.951476] Call Trace:
[ 218.953916] [cac2bd50] [beab8570] test_bpf_init+0x200/0x3c90 [test_bpf] (unreliable)
[ 218.962034] [cac2bde0] [c0004c04] do_one_initcall+0x4c/0x1fc
[ 218.967706] [cac2be40] [c00a2ec4] do_init_module+0x68/0x360
[ 218.973292] [cac2be60] [c00a5194] init_module_from_file+0x8c/0xc0
[ 218.979401] [cac2bed0] [c00a5568] sys_finit_module+0x250/0x3f0
[ 218.985248] [cac2bf20] [c000e390] system_call_exception+0x8c/0x15c
[ 218.991444] [cac2bf30] [c00120a8] ret_from_syscall+0x0/0x28
This happens in the main loop of memcpy()
==> c0017a80: 7c 0b 37 ec dcbz r11,r6
c0017a84: 80 e4 00 04 lwz r7,4(r4)
c0017a88: 81 04 00 08 lwz r8,8(r4)
c0017a8c: 81 24 00 0c lwz r9,12(r4)
c0017a90: 85 44 00 10 lwzu r10,16(r4)
c0017a94: 90 e6 00 04 stw r7,4(r6)
c0017a98: 91 06 00 08 stw r8,8(r6)
c0017a9c: 91 26 00 0c stw r9,12(r6)
c0017aa0: 95 46 00 10 stwu r10,16(r6)
c0017aa4: 42 00 ff dc bdnz c0017a80 <memcpy+0x88>
Commit ac9f97ff8b32 ("powerpc/8xx: Inconditionally use task PGDIR in
DTLB misses") relies on re-reading DAR register to know if an error is
due to a missing copy of a PMD entry in task's PGDIR, allthough DAR
was already read in the exception prolog and copied into thread
struct. This is because is it done very early in the exception and
there are not enough registers available to keep a pointer to thread
struct.
However, dcbz instruction is buggy and doesn't update DAR register on
fault. That is detected and generates a call to FixupDAR workaround
which updates DAR copy in thread struct but doesn't fix DAR register.
Let's fix DAR in addition to the update of DAR copy in thread struct.
Fixes: ac9f97ff8b32 ("powerpc/8xx: Inconditionally use task PGDIR in DTLB misses")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2b851399bd87e81c6ccb87ea3a7a6b32c7aa04d7.1728118396.git.christophe.leroy@csgroup.eu
|
|
ftrace_regs was created to hold registers that store information to save
function parameters, return value and stack. Since it is a subset of
pt_regs, it should only be used by its accessor functions. But because
pt_regs can easily be taken from ftrace_regs (on most archs), it is
tempting to use it directly. But when running on other architectures, it
may fail to build or worse, build but crash the kernel!
Instead, make struct ftrace_regs an empty structure and have the
architectures define __arch_ftrace_regs and all the accessor functions
will typecast to it to get to the actual fields. This will help avoid
usage of ftrace_regs directly.
Link: https://lore.kernel.org/all/20241007171027.629bdafd@gandalf.local.home/
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/20241008230628.958778821@goodmis.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Once upon a time, predecessors of those used to do file lookup
without bumping a refcount, provided that caller held rcu_read_lock()
across the lookup and whatever it wanted to read from the struct
file found. When struct file allocation switched to SLAB_TYPESAFE_BY_RCU,
that stopped being feasible and these primitives started to bump the
file refcount for lookup result, requiring the caller to call fput()
afterwards.
But that turned them pointless - e.g.
rcu_read_lock();
file = lookup_fdget_rcu(fd);
rcu_read_unlock();
is equivalent to
file = fget_raw(fd);
and all callers of lookup_fdget_rcu() are of that form. Similarly,
task_lookup_fdget_rcu() calls can be replaced with calling fget_task().
task_lookup_next_fdget_rcu() doesn't have direct counterparts, but
its callers would be happier if we replaced it with an analogue that
deals with RCU internally.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Allow r30 to be used in vDSO code generation of getrandom
Thanks to Jason A. Donenfeld
* tag 'powerpc-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: allow r30 in vDSO code generation of getrandom
|
|
CRYPTO_AES_GCM_P10
Added CRYPTO_SIMD for CRYPTO_AES_GCM_P10.
Fixes: 45a4672b9a6e ("crypto: p10-aes-gcm - Update Kconfig and Makefile")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch is to fix an issue when simd is not usable that data mismatch
may occur. The fix is to register algs as SIMD modules so that the
algorithm is excecuted when SIMD instructions is usable. Called
gcm_update() to generate the final digest if needed.
A new module rfc4106(gcm(aes)) is also added.
Fixes: cdcecfd9991f ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Re-write AES/GCM assembly codes with smaller footprints and
small performance gain. Handling the partial blocks differently that
computes partial block to AES states and re-assembles to a complete
block and then computes a full-block hash.
Added gcm_update() to update the last partial block hash value and
generate the final digest.
Fixes: fd0e9b3e2ee6 ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
For gettimeofday, -ffixed-r30 was passed to work around a bug in Go
code, where the vDSO trampoline forgot to save and restore this register
across function calls. But Go requires a different trampoline for every
call, and there's no reason that new Go code needs to be broken and add
more bugs. So remove -ffixed-r30 for getrandom.
Fixes: 8072b39c3a75 ("powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240925175021.1526936-2-Jason@zx2c4.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix build error in vdso32 when building 64-bit with COMPAT=y and -Os
- Fix build error in pseries EEH when CONFIG_DEBUG_FS is not set
Thanks to Christophe Leroy, Narayana Murty N, Christian Zigotzky, and
Ritesh Harjani.
* tag 'powerpc-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/eeh: move pseries_eeh_err_inject() outside CONFIG_DEBUG_FS block
powerpc/vdso32: Fix use of crtsavres for PPC64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Disable buggy p10 aes-gcm code on powerpc
- Fix module aliases in paes_s390
- Fix buffer overread in caam
* tag 'v6.12-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: powerpc/p10-aes-gcm - Disable CRYPTO_AES_GCM_P10
crypto: s390/paes - Fix module aliases
crypto: caam - Pad SG length when allocating hash edesc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
|
|
Data mismatch found when testing ipsec tunnel with AES/GCM crypto.
Disabling CRYPTO_AES_GCM_P10 in Kconfig for this feature.
Fixes: fd0e9b3e2ee6 ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation")
Fixes: cdcecfd9991f ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation")
Fixes: 45a4672b9a6e2 ("crypto: p10-aes-gcm - Update Kconfig and Makefile")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Makes pseries_eeh_err_inject() available even when debugfs
is disabled (CONFIG_DEBUG_FS=n). It moves eeh_debugfs_break_device()
and eeh_pe_inject_mmio_error() out of the CONFIG_DEBUG_FS block
and renames it as eeh_break_device().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409170509.VWC6jadC-lkp@intel.com/
Fixes: b0e2b828dfca ("powerpc/pseries/eeh: Fix pseries_eeh_err_inject")
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240917132445.3868016-1-nnmlinux@linux.ibm.com
|
|
crtsavres.S content is encloded by a #ifndef CONFIG_PPC64
To be used on VDSO32 on PPC64 it's content must available on PPC64 as
well.
Replace #ifndef CONFIG_PPC64 by #ifndef __powerpc64__ as __powerpc64__
is not set when building VDSO32 on PPC64.
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Closes: https://lore.kernel.org/linuxppc-dev/047b7503-af0c-4bb0-b12a-2f6b1e461752@csgroup.eu/T/
Fixes: b163596a5b6f ("powerpc/vdso32: Add crtsavres")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/aded2b257018fe654db759fdfa4ab1a0b5426b1b.1726772140.git.christophe.leroy@csgroup.eu
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph
Hellwig)
* tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reflow dma_supported
dma-mapping: reliably inform about DMA support for IOMMU
dma-mapping: add tracing for dma-mapping API calls
dma-mapping: use IOMMU DMA calls for common alloc/free page calls
dma-direct: optimize page freeing when it is not addressable
dma-mapping: clearly mark DMA ops as an architecture feature
vdpa_sim: don't select DMA_OPS
arm64: mm: keep low RAM dma zone
dma-mapping: don't return errors from dma_set_max_seg_size
dma-mapping: don't return errors from dma_set_seg_boundary
dma-mapping: don't return errors from dma_set_min_align_mask
scsi: check that busses support the DMA API before setting dma parameters
arm64: mm: fix DMA zone when dma-ranges is missing
dma-mapping: direct calls for dma-iommu
dma-mapping: call ->unmap_page and ->unmap_sg unconditionally
arm64: support DMA zone above 4GB
dma-mapping: replace zone_dma_bits by zone_dma_limit
dma-mapping: use bit masking to check VM_DMA_COHERENT
|
|
Pull drm updates from Dave Airlie:
"This adds a couple of patches outside the drm core, all should be
acked appropriately, the string and pstore ones are the main ones that
come to mind.
Otherwise it's the usual drivers, xe is getting enabled by default on
some new hardware, we've changed the device number handling to allow
more devices, and we added some optional rust code to create QR codes
in the panic handler, an idea first suggested I think 10 years ago :-)
string:
- add mem_is_zero()
core:
- support more device numbers
- use XArray for minor ids
- add backlight constants
- Split dma fence array creation into alloc and arm
fbdev:
- remove usage of old fbdev hooks
kms:
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
dma-buf:
- docs cleanup
buddy:
- Add start address support for trim function
printk:
- pass description to kmsg_dump
scheduler:
- Remove full_recover from drm_sched_start
ttm:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
panic:
- add display QR code (in rust)
displayport:
- mst: GUID improvements
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
- lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
- anx7625: simplify OF array handling
- dw-hdmi: simplify clock handling
- lontium-lt8912b: fix mode validation
- nwl-dsi: fix mode vsync/hsync polarity
xe:
- Enable LunarLake and Battlemage support
- Introducing Xe2 ccs modifiers for integrated and discrete graphics
- rename xe perf to xe observation
- use wb caching on DGFX for system memory
- add fence timeouts
- Lunar Lake graphics/media/display workarounds
- Battlemage workarounds
- Battlemage GSC support
- GSC and HuC fw updates for LL/BM
- use dma_fence_chain_free
- refactor hw engine lookup and mmio access
- enable priority mem read for Xe2
- Add first GuC BMG fw
- fix dma-resv lock
- Fix DGFX display suspend/resume
- Use xe_managed for kernel BOs
- Use reserved copy engine for user binds on faulting devices
- Allow mixing dma-fence jobs and long-running faulting jobs
- fix media TLB invalidation
- fix rpm in TTM swapout path
- track resources and VF state by PF
i915:
- Type-C programming fix for MTL+
- FBC cleanup
- Calc vblank delay more accurately
- On DP MST, Enable LT fallback for UHBR<->non-UHBR rates
- Fix DP LTTPR detection
- limit relocations to INT_MAX
- fix long hangs in buddy allocator on DG2/A380
amdgpu:
- Per-queue reset support
- SDMA devcoredump support
- DCN 4.0.1 updates
- GFX12/VCN4/JPEG4 updates
- Convert vbios embedded EDID to drm_edid
- GFX9.3/9.4 devcoredump support
- process isolation framework for GFX 9.4.3/4
- take IOMMU mappings into account for P2P DMA
amdkfd:
- CRIU fixes
- HMM fix
- Enable process isolation support for GFX 9.4.3/4
- Allow users to target recommended SDMA engines
- KFD support for targetting queues on recommended SDMA engines
radeon:
- remove .load and drm_dev_alloc
- Fix vbios embedded EDID size handling
- Convert vbios embedded EDID to drm_edid
- Use GEM references instead of TTM
- r100 cp init cleanup
- Fix potential overflows in evergreen CS offset tracking
msm:
- DPU:
- implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350
- DP:
- Enable widebus on all relevant chipsets
- MSM8998 HDMI support
- GPU:
- A642L speedbin support
- A615/A306/A621 support
- A7xx devcoredump support
ast:
- astdp: Support AST2600 with VGA
- Clean up HPD
- Fix timeout loop for DP link training
- reorganize output code by type (VGA, DP, etc)
- convert to struct drm_edid
- fix BMC handling for all outputs
exynos:
- drop stale MAINTAINERS pattern
- constify struct
loongson:
- use GEM refcount over TTM
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
- transparently support BMC outputs
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
gm12u320:
- convert to struct drm_edid
gma500:
- update i2c terms
lcdif:
- pixel clock fix
host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()
imx:
- ipuv3: convert to struct drm_edid
omapdrm:
- improve error handling
- use common helper for_each_endpoint_of_node()
panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp:
- add support for BOE NE140WUM-N6G
- revert support for SDC ATNA45AF01
- visionox-vtdr6130:
- improve error handling
- use devm_regulator_bulk_get_const()
- boe-th101mb31ig002:
- Support for starry-er88577 MIPI-DSI panel plus DT
- Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE
NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da:
- Support Melfas lmfbx101117480 MIPI-DSI panel plus DT
- Refactor for code sharing
- panel-edp: fix name for HKC MB116AN01
- jd9365da: fix "exit sleep" commands
- jdi-fhd-r63452: simplify error handling with DSI multi-style
helpers
- mantix-mlaf057we51: simplify error handling with DSI multi-style
helpers
- simple:
- support Innolux G070ACE-LH3 plus DT bindings
- support On Tat Industrial Company KD50G21-40NT-A1 plus DT
bindings
- st7701:
- decouple DSI and DRM code
- add SPI support
- support Anbernic RG28XX plus DT bindings
mediatek:
- support alpha blending
- remove cl in struct cmdq_pkt
- ovl adaptor fix
- add power domain binding for mediatek DPI controller
renesas:
- rz-du: add support for RZ/G2UL plus DT bindings
rockchip:
- Improve DP sink-capability reporting
- dw_hdmi: Support 4k@60Hz
- vop:
- Support RGB display on Rockchip RK3066
- Support 4096px width
sti:
- convert to struct drm_edid
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc:
- Fix transparency after disabling plane
- Remove unused interrupt
tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
- Call drm_atomic_helper_shutdown()
vc4:
- fix PM during detect
- replace DRM_ERROR() with drm_error()
- v3d: simplify clock retrieval
v3d:
- Clean up perfmon
virtio:
- add DRM capset"
* tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits)
drm/xe: Fix missing conversion to xe_display_pm_runtime_resume
drm/xe/xe2hpg: Add Wa_15016589081
drm/xe: Don't keep stale pointer to bo->ggtt_node
drm/xe: fix missing 'xe_vm_put'
drm/xe: fix build warning with CONFIG_PM=n
drm/xe: Suppress missing outer rpm protection warning
drm/xe: prevent potential UAF in pf_provision_vf_ggtt()
drm/amd/display: Add all planes on CRTC to state for overlay cursor
drm/i915/bios: fix printk format width
drm/i915/display: Fix BMG CCS modifiers
drm/amdgpu: get rid of bogus includes of fdtable.h
drm/amdkfd: CRIU fixes
drm/amdgpu: fix a race in kfd_mem_export_dmabuf()
drm: new helper: drm_gem_prime_handle_to_dmabuf()
drm/amdgpu/atomfirmware: Silence UBSAN warning
drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare'
drm/amd/amdgpu: apply command submission parser for JPEG v1
drm/amd/amdgpu: apply command submission parser for JPEG v2+
drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3
drm/amd/pm: update the features set on smu v14.0.2/3
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Reduce alignment constraints on STRICT_KERNEL_RWX and speed-up TLB
misses on 8xx and 603
- Replace kretprobe code with rethook and enable fprobe
- Remove the "fast endian switch" syscall
- Handle DLPAR device tree updates in kernel, allowing the deprecation
of the binary /proc/powerpc/ofdt interface
Thanks to Abhishek Dubey, Alex Shi, Benjamin Gray, Christophe Leroy,
Gaosheng Cui, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari
Bathini, Huang Xiaojia, Jinjie Ruan, Madhavan Srinivasan, Miguel Ojeda,
Mina Almasry, Narayana Murty N, Naveen Rao, Rob Herring (Arm), Scott
Cheloha, Segher Boessenkool, Stephen Rothwell, Thomas Zimmermann, Uwe
Kleine-König, Vaibhav Jain, and Zhang Zekun.
* tag 'powerpc-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (59 commits)
powerpc/atomic: Use YZ constraints for DS-form instructions
MAINTAINERS: powerpc: Add Maddy
powerpc: Switch back to struct platform_driver::remove()
powerpc/pseries/eeh: Fix pseries_eeh_err_inject
selftests/powerpc: Allow building without static libc
macintosh/via-pmu: register_pmu_pm_ops() can be __init
powerpc: Stop using no_llseek
powerpc/64s: Remove the "fast endian switch" syscall
powerpc/mm/64s: Restrict THP to Radix or HPT w/64K pages
powerpc/mm/64s: Move THP reqs into a separate symbol
powerpc/64s: Make mmu_hash_ops __ro_after_init
powerpc: Replace kretprobe code with rethook on powerpc
powerpc: pseries: Constify struct kobj_type
powerpc: powernv: Constify struct kobj_type
powerpc: Constify struct kobj_type
powerpc/pseries/dlpar: Add device tree nodes for DLPAR IO add
powerpc/pseries/dlpar: Remove device tree node for DLPAR IO remove
powerpc/pseries: Use correct data types from pseries_hp_errorlog struct
powerpc/vdso: Inconditionally use CFUNC macro
powerpc/32: Implement validation of emergency stack
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"Originally I'd planned on sending each of the vDSO getrandom()
architecture ports to their respective arch trees. But as we started
to work on this, we found lots of interesting issues in the shared
code and infrastructure, the fixes for which the various archs needed
to base their work.
So in the end, this turned into a nice collaborative effort fixing up
issues and porting to 5 new architectures -- arm64, powerpc64,
powerpc32, s390x, and loongarch64 -- with everybody pitching in and
commenting on each other's code. It was a fun development cycle.
This contains:
- Numerous fixups to the vDSO selftest infrastructure, getting it
running successfully on more platforms, and fixing bugs in it.
- Additions to the vDSO getrandom & chacha selftests. Basically every
time manual review unearthed a bug in a revision of an arch patch,
or an ambiguity, the tests were augmented.
By the time the last arch was submitted for review, s390x, v1 of
the series was essentially fine right out of the gate.
- Fixes to the the generic C implementation of vDSO getrandom, to
build and run successfully on all archs, decoupling it from
assumptions we had (unintentionally) made on x86_64 that didn't
carry through to the other architectures.
- Port of vDSO getrandom to LoongArch64, from Xi Ruoyao and acked by
Huacai Chen.
- Port of vDSO getrandom to ARM64, from Adhemerval Zanella and acked
by Will Deacon.
- Port of vDSO getrandom to PowerPC, in both 32-bit and 64-bit
varieties, from Christophe Leroy and acked by Michael Ellerman.
- Port of vDSO getrandom to S390X from Heiko Carstens, the arch
maintainer.
While it'd be natural for there to be things to fix up over the course
of the development cycle, these patches got a decent amount of review
from a fairly diverse crew of folks on the mailing lists, and, for the
most part, they've been cooking in linux-next, which has been helpful
for ironing out build issues.
In terms of architectures, I think that mostly takes care of the
important 64-bit archs with hardware still being produced and running
production loads in settings where vDSO getrandom is likely to help.
Arguably there's still RISC-V left, and we'll see for 6.13 whether
they find it useful and submit a port"
* tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (47 commits)
selftests: vDSO: check cpu caps before running chacha test
s390/vdso: Wire up getrandom() vdso implementation
s390/vdso: Move vdso symbol handling to separate header file
s390/vdso: Allow alternatives in vdso code
s390/module: Provide find_section() helper
s390/facility: Let test_facility() generate static branch if possible
s390/alternatives: Remove ALT_FACILITY_EARLY
s390/facility: Disable compile time optimization for decompressor code
selftests: vDSO: fix vdso_config for s390
selftests: vDSO: fix ELF hash table entry size for s390x
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO32
powerpc/vdso: Refactor CFLAGS for CVDSO build
powerpc/vdso32: Add crtsavres
mm: Define VM_DROPPABLE for powerpc/32
powerpc/vdso: Fix VDSO data access when running in a non-root time namespace
selftests: vDSO: don't include generated headers for chacha test
arm64: vDSO: Wire up getrandom() vDSO implementation
arm64: alternative: make alternative_has_cap_likely() VDSO compatible
selftests: vDSO: also test counter in vdso_test_chacha
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Neeraj Upadhyay:
"Context tracking:
- rename context tracking state related symbols and remove references
to "dynticks" in various context tracking state variables and
related helpers
- force context_tracking_enabled_this_cpu() to be inlined to avoid
leaving a noinstr section
CSD lock:
- enhance CSD-lock diagnostic reports
- add an API to provide an indication of ongoing CSD-lock stall
nocb:
- update and simplify RCU nocb code to handle (de-)offloading of
callbacks only for offline CPUs
- fix RT throttling hrtimer being armed from offline CPU
rcutorture:
- remove redundant rcu_torture_ops get_gp_completed fields
- add SRCU ->same_gp_state and ->get_comp_state functions
- add generic test for NUM_ACTIVE_*RCU_POLL* for testing RCU and SRCU
polled grace periods
- add CFcommon.arch for arch-specific Kconfig options
- print number of update types in rcu_torture_write_types()
- add rcutree.nohz_full_patience_delay testing to the TREE07 scenario
- add a stall_cpu_repeat module parameter to test repeated CPU stalls
- add argument to limit number of CPUs a guest OS can use in
torture.sh
rcustall:
- abbreviate RCU CPU stall warnings during CSD-lock stalls
- Allow dump_cpu_task() to be called without disabling preemption
- defer printing stall-warning backtrace when holding rcu_node lock
srcu:
- make SRCU gp seq wrap-around faster
- add KCSAN checks for concurrent updates to ->srcu_n_exp_nodelay and
->reschedule_count which are used in heuristics governing
auto-expediting of normal SRCU grace periods and
grace-period-state-machine delays
- mark idle SRCU-barrier callbacks to help identify stuck
SRCU-barrier callback
rcu tasks:
- remove RCU Tasks Rude asynchronous APIs as they are no longer used
- stop testing RCU Tasks Rude asynchronous APIs
- fix access to non-existent percpu regions
- check processor-ID assumptions during chosen CPU calculation for
callback enqueuing
- update description of rtp->tasks_gp_seq grace-period sequence
number
- add rcu_barrier_cb_is_done() to identify whether a given
rcu_barrier callback is stuck
- mark idle Tasks-RCU-barrier callbacks
- add *torture_stats_print() functions to print detailed diagnostics
for Tasks-RCU variants
- capture start time of rcu_barrier_tasks*() operation to help
distinguish a hung barrier operation from a long series of barrier
operations
refscale:
- add a TINY scenario to support tests of Tiny RCU and Tiny
SRCU
- optimize process_durations() operation
rcuscale:
- dump stacks of stalled rcu_scale_writer() instances and
grace-period statistics when rcu_scale_writer() stalls
- mark idle RCU-barrier callbacks to identify stuck RCU-barrier
callbacks
- print detailed grace-period and barrier diagnostics on
rcu_scale_writer() hangs for Tasks-RCU variants
- warn if async module parameter is specified for RCU implementations
that do not have async primitives such as RCU Tasks Rude
- make all writer tasks report upon hang
- tolerate repeated GFP_KERNEL failure in rcu_scale_writer()
- use special allocator for rcu_scale_writer()
- NULL out top-level pointers to heap memory to avoid double-free
bugs on modprobe failures
- maintain per-task instead of per-CPU callbacks count to avoid any
issues with migration of either tasks or callbacks
- constify struct ref_scale_ops
Fixes:
- use system_unbound_wq for kfree_rcu work to avoid disturbing
isolated CPUs
Misc:
- warn on unexpected rcu_state.srs_done_tail state
- better define "atomic" for list_replace_rcu() and
hlist_replace_rcu() routines
- annotate struct kvfree_rcu_bulk_data with __counted_by()"
* tag 'rcu.release.v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (90 commits)
rcu: Defer printing stall-warning backtrace when holding rcu_node lock
rcu/nocb: Remove superfluous memory barrier after bypass enqueue
rcu/nocb: Conditionally wake up rcuo if not already waiting on GP
rcu/nocb: Fix RT throttling hrtimer armed from offline CPU
rcu/nocb: Simplify (de-)offloading state machine
context_tracking: Tag context_tracking_enabled_this_cpu() __always_inline
context_tracking, rcu: Rename rcu_dyntick trace event into rcu_watching
rcu: Update stray documentation references to rcu_dynticks_eqs_{enter, exit}()
rcu: Rename rcu_momentary_dyntick_idle() into rcu_momentary_eqs()
rcu: Rename rcu_implicit_dynticks_qs() into rcu_watching_snap_recheck()
rcu: Rename dyntick_save_progress_counter() into rcu_watching_snap_save()
rcu: Rename struct rcu_data .exp_dynticks_snap into .exp_watching_snap
rcu: Rename struct rcu_data .dynticks_snap into .watching_snap
rcu: Rename rcu_dynticks_zero_in_eqs() into rcu_watching_zero_in_eqs()
rcu: Rename rcu_dynticks_in_eqs_since() into rcu_watching_snap_stopped_since()
rcu: Rename rcu_dynticks_in_eqs() into rcu_watching_snap_in_eqs()
rcu: Rename rcu_dynticks_eqs_online() into rcu_watching_online()
context_tracking, rcu: Rename rcu_dynticks_curr_cpu_in_eqs() into rcu_is_watching_curr_cpu()
context_tracking, rcu: Rename rcu_dynticks_task*() into rcu_task*()
refscale: Constify struct ref_scale_ops
...
|
|
The 'ld' and 'std' instructions require a 4-byte aligned displacement
because they are DS-form instructions. But the "m" asm constraint
doesn't enforce that.
That can lead to build errors if the compiler chooses a non-aligned
displacement, as seen with GCC 14:
/tmp/ccuSzwiR.s: Assembler messages:
/tmp/ccuSzwiR.s:2579: Error: operand out of domain (39 is not a multiple of 4)
make[5]: *** [scripts/Makefile.build:229: net/core/page_pool.o] Error 1
Dumping the generated assembler shows:
ld 8,39(8) # MEM[(const struct atomic64_t *)_29].counter, t
Use the YZ constraints to tell the compiler either to generate a DS-form
displacement, or use an X-form instruction, either of which prevents the
build error.
See commit 2d43cc701b96 ("powerpc/uaccess: Fix build errors seen with
GCC 13/14") for more details on the constraint letters.
Fixes: 9f0cbea0d8cc ("[POWERPC] Implement atomic{, 64}_{read, write}() without volatile")
Cc: stable@vger.kernel.org # v2.6.24+
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240913125302.0a06b4c7@canb.auug.org.au
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240916120510.2017749-1-mpe@ellerman.id.au
|
|
The z3fold compressed pages allocator is rarely used, most users use
zsmalloc. The only disadvantage of zsmalloc in comparison is the
dependency on MMU, and zbud is a more common option for !MMU as it was the
default zswap allocator for a long time.
Historically, zsmalloc had worse latency than zbud and z3fold but offered
better memory savings. This is no longer the case as shown by a simple
recent analysis [1]. That analysis showed that z3fold does not have any
advantage over zsmalloc or zbud considering both performance and memory
usage. In a kernel build test on tmpfs in a limited cgroup, z3fold took
3% more time and used 1.8% more memory. The latency of zswap_load() was
7% higher, and that of zswap_store() was 10% higher. Zsmalloc is better
in all metrics.
Moreover, z3fold apparently has latent bugs, which was made noticeable by
a recent soft lockup bug report with z3fold [2]. Switching to zsmalloc
not only fixed the problem, but also reduced the swap usage from 6~8G to
1~2G. Other users have also reported being bitten by mistakenly enabling
z3fold.
Other than hurting users, z3fold is repeatedly causing wasted engineering
effort. Apart from investigating the above bug, it came up in multiple
development discussions (e.g. [3]) as something we need to handle, when
there aren't any legit users (at least not intentionally).
The natural course of action is to deprecate z3fold, and remove in a few
cycles if no objections are raised from active users. Next on the list
should be zbud, as it offers marginal latency gains at the cost of huge
memory waste when compared to zsmalloc. That one will need to wait until
zsmalloc does not depend on MMU.
Rename the user-visible config option from CONFIG_Z3FOLD to
CONFIG_Z3FOLD_DEPRECATED so that users with CONFIG_Z3FOLD=y get a new
prompt with explanation during make oldconfig. Also, remove
CONFIG_Z3FOLD=y from defconfigs.
[1]https://lore.kernel.org/lkml/CAJD7tkbRF6od-2x_L8-A1QL3=2Ww13sCj4S3i4bNndqF+3+_Vg@mail.gmail.com/
[2]https://lore.kernel.org/lkml/EF0ABD3E-A239-4111-A8AB-5C442E759CF3@gmail.com/
[3]https://lore.kernel.org/lkml/CAJD7tkbnmeVugfunffSovJf9FAgy9rhBVt_tx=nxUveLUfqVsA@mail.gmail.com/
[arnd@arndb.de: deprecate ZSWAP_ZPOOL_DEFAULT_Z3FOLD as well]
Link: https://lkml.kernel.org/r/20240909202625.1054880-1-arnd@kernel.org
Link: https://lkml.kernel.org/r/20240904233343.933462-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vitaly Wool <vitaly.wool@konsulko.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There're:
- 8 archs (arc, arm64, include, mips, powerpc, s390, sh, x86) that
support pte_pgprot().
- 2 archs (x86, sparc) that support pmd_pgprot().
- 1 arch (x86) that support pud_pgprot().
Always define them to be used in generic code, and then we don't need to
fiddle with "#ifdef"s when doing so.
Link: https://lkml.kernel.org/r/20240826204353.2228736-9-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
- Prepare the core for supporting parallel hotplug on loongarch
- A small set of cleanups and enhancements
* tag 'smp-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Mark smp_prepare_boot_cpu() __init
cpu: Fix W=1 build kernel-doc warning
cpu/hotplug: Provide weak fallback for arch_cpuhp_init_parallel_bringup()
cpu/hotplug: Make HOTPLUG_PARALLEL independent of HOTPLUG_SMT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights are support for Arm's "Permission Overlay Extension"
using memory protection keys, support for running as a protected guest
on Android as well as perf support for a bunch of new interconnect
PMUs.
Summary:
ACPI:
- Enable PMCG erratum workaround for HiSilicon HIP10 and 11
platforms.
- Ensure arm64-specific IORT header is covered by MAINTAINERS.
CPU Errata:
- Enable workaround for hardware access/dirty issue on Ampere-1A
cores.
Memory management:
- Define PHYSMEM_END to fix a crash in the amdgpu driver.
- Avoid tripping over invalid kernel mappings on the kexec() path.
- Userspace support for the Permission Overlay Extension (POE) using
protection keys.
Perf and PMUs:
- Add support for the "fixed instruction counter" extension in the
CPU PMU architecture.
- Extend and fix the event encodings for Apple's M1 CPU PMU.
- Allow LSM hooks to decide on SPE permissions for physical
profiling.
- Add support for the CMN S3 and NI-700 PMUs.
Confidential Computing:
- Add support for booting an arm64 kernel as a protected guest under
Android's "Protected KVM" (pKVM) hypervisor.
Selftests:
- Fix vector length issues in the SVE/SME sigreturn tests
- Fix build warning in the ptrace tests.
Timers:
- Add support for PR_{G,S}ET_TSC so that 'rr' can deal with
non-determinism arising from the architected counter.
Miscellaneous:
- Rework our IPI-based CPU stopping code to try NMIs if regular IPIs
don't succeed.
- Minor fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
perf: arm-ni: Fix an NULL vs IS_ERR() bug
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: pkeys: remove redundant WARN
perf: arm_pmuv3: Use BR_RETIRED for HW branch event if enabled
MAINTAINERS: List Arm interconnect PMUs as supported
perf: Add driver for Arm NI-700 interconnect PMU
dt-bindings/perf: Add Arm NI-700 PMU
perf/arm-cmn: Improve format attr printing
perf/arm-cmn: Clean up unnecessary NUMA_NO_NODE check
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
perf/arm-cmn: Support CMN S3
dt-bindings: perf: arm-cmn: Add CMN S3
perf/arm-cmn: Refactor DTC PMU register access
perf/arm-cmn: Make cycle counts less surprising
perf/arm-cmn: Improve build-time assertion
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu"
"API:
- Make self-test asynchronous
Algorithms:
- Remove MPI functions added for SM3
- Add allocation error checks to remaining MPI functions (introduced
for SM3)
- Set default Jitter RNG OSR to 3
Drivers:
- Add hwrng driver for Rockchip RK3568 SoC
- Allow disabling SR-IOV VFs through sysfs in qat
- Fix device reset bugs in hisilicon
- Fix authenc key parsing by using generic helper in octeontx*
Others:
- Fix xor benchmarking on parisc"
* tag 'v6.12-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (96 commits)
crypto: n2 - Set err to EINVAL if snprintf fails for hmac
crypto: camm/qi - Use ERR_CAST() to return error-valued pointer
crypto: mips/crc32 - Clean up useless assignment operations
crypto: qcom-rng - rename *_of_data to *_match_data
crypto: qcom-rng - fix support for ACPI-based systems
dt-bindings: crypto: qcom,prng: document support for SA8255p
crypto: aegis128 - Fix indentation issue in crypto_aegis128_process_crypt()
crypto: octeontx* - Select CRYPTO_AUTHENC
crypto: testmgr - Hide ENOENT errors
crypto: qat - Remove trailing space after \n newline
crypto: hisilicon/sec - Remove trailing space after \n newline
crypto: algboss - Pass instance creation error up
crypto: api - Fix generic algorithm self-test races
crypto: hisilicon/qm - inject error before stopping queue
crypto: hisilicon/hpre - mask cluster timeout error
crypto: hisilicon/qm - reset device before enabling it
crypto: hisilicon/trng - modifying the order of header files
crypto: hisilicon - add a lock for the qp send operation
crypto: hisilicon - fix missed error branch
crypto: ccp - do not request interrupt on cmd completion when irqs disabled
...
|
|
Most of the drivers which used this header have been deleted, most
of these code is obsoleted, move the only defines that are actually
used into arch/powerpc/platforms/chrp/pegasos_eth.c and delete the
file completely.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://patch.msgid.link/20240912011949.2726928-1-cuigaosheng1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend getrandom() vDSO implementation to VDSO64.
Tested on QEMU on both ppc64_defconfig and ppc64le_defconfig.
Results from a Power9 (PowerNV):
~ # ./vdso_test_getrandom bench-single
vdso: 25000000 times in 0.787943615 seconds
libc: 25000000 times in 14.101887252 seconds
syscall: 25000000 times in 14.047475082 seconds
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
To be consistent with other VDSO functions, the function is called
__kernel_getrandom()
__arch_chacha20_blocks_nostack() fonction is implemented basically
with 32 bits operations. It performs 4 QUARTERROUND operations in
parallele. There are enough registers to avoid using the stack:
On input:
r3: output bytes
r4: 32-byte key input
r5: 8-byte counter input/output
r6: number of 64-byte blocks to write to output
During operation:
stack: pointer to counter (r5) and non-volatile registers (r14-131)
r0: counter of blocks (initialised with r6)
r4: Value '4' after key has been read, used for indexing
r5-r12: key
r14-r15: block counter
r16-r31: chacha state
At the end:
r0, r6-r12: Zeroised
r5, r14-r31: Restored
Performance on powerpc 885 (using kernel selftest):
~# ./vdso_test_getrandom bench-single
vdso: 25000000 times in 62.938002291 seconds
libc: 25000000 times in 535.581916866 seconds
syscall: 25000000 times in 531.525042806 seconds
Performance on powerpc 8321 (using kernel selftest):
~# ./vdso_test_getrandom bench-single
vdso: 25000000 times in 16.899318858 seconds
libc: 25000000 times in 131.050596522 seconds
syscall: 25000000 times in 129.794790389 seconds
This first patch adds support for VDSO32. As selftests cannot easily
be generated only for VDSO32, and because the following patch brings
support for VDSO64 anyway, this patch opts out all code in
__arch_chacha20_blocks_nostack() so that vdso_test_chacha will not
fail to compile and will not crash on PPC64/PPC64LE, allthough the
selftest itself will fail.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
In order to avoid two much duplication when we add new VDSO
functionnalities in C like getrandom, refactor common CFLAGS.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Commit 08c18b63d965 ("powerpc/vdso32: Add missing _restgpr_31_x to fix
build failure") added _restgpr_31_x to the vdso for gettimeofday, but
the work on getrandom shows that we will need more of those functions.
Remove _restgpr_31_x and link in crtsavres.o so that we get all
save/restore functions when optimising the kernel for size.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
When running in a non-root time namespace, the global VDSO data page
is replaced by a dedicated namespace data page and the global data
page is mapped next to it. Detailed explanations can be found at
commit 660fd04f9317 ("lib/vdso: Prepare for time namespace support").
When it happens, __kernel_get_syscall_map and __kernel_get_tbfreq
and __kernel_sync_dicache don't work anymore because they read 0
instead of the data they need.
To address that, clock_mode has to be read. When it is set to
VDSO_CLOCKMODE_TIMENS, it means it is a dedicated namespace data page
and the global data is located on the following page.
Add a macro called get_realdatapage which reads clock_mode and add
PAGE_SIZE to the pointer provided by get_datapage macro when
clock_mode is equal to VDSO_CLOCKMODE_TIMENS. Use this new macro
instead of get_datapage macro except for time functions as they handle
it internally.
Fixes: 74205b3fc2ef ("powerpc/vdso: Add support for time namespaces")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Closes: https://lore.kernel.org/all/ZtnYqZI-nrsNslwy@zx2c4.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
|
|
Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
|