| Age | Commit message (Collapse) | Author |
|---|
|
When the kernel displays "Unable to handle kernel paging request at
virtual address", we would like to confirm the status of the virtual
address in the page table. So add show_pte() before die().
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240723021820.87718-1-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Handle VM_FAULT_SIGSEGV in the page fault path so that we correctly
kill the process and we don't BUG() the kernel.
Fixes: 07037db5d479 ("RISC-V: Paging and MMU")
Signed-off-by: Zhe Qiao <qiaozhe@iscas.ac.cn>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240731084547.85380-1-qiaozhe@iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
I accidentally picked up an earlier version of this patch, which had
already landed via mm. The patch I picked up contains a bug, which I
kept as I thought it was a fix. So let's just revert it.
This reverts commit 4c6c0020427a4547845a83f7e4d6085e16c3e24f.
Fixes: 4c6c0020427a ("riscv: mm: accelerate pagefault when badaccess")
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240530164451.21336-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The access_error() of vma already checked under per-VMA lock, if it
is a bad access, directly handle error, no need to retry with mmap_lock
again. Since the page faut is handled under per-VMA lock, count it as
a vma lock event with VMA_LOCK_SUCCESS.
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240403083805.1818160-6-wangkefeng.wang@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The access_error() of vma already checked under per-VMA lock, if it is a
bad access, directly handle error, no need to retry with mmap_lock again.
Since the page faut is handled under per-VMA lock, count it as a vma lock
event with VMA_LOCK_SUCCESS.
[wangkefeng.wang@huawei.com: use `cause' rather than SIGSEGV, per Alexandre]
Link: https://lkml.kernel.org/r/ac978061-ce1a-40a4-8b0a-61883b42bea7@huawei.com
Link: https://lkml.kernel.org/r/20240403083805.1818160-6-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for many new extensions in hwprobe, along with a handful of
cleanups
- Various cleanups to our page table handling code, so we alwayse use
{READ,WRITE}_ONCE
- Support for the which-cpus flavor of hwprobe
- Support for XIP kernels has been resurrected
* tag 'riscv-for-linus-6.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
riscv: hwprobe: export Zicond extension
riscv: hwprobe: export Zacas ISA extension
riscv: add ISA extension parsing for Zacas
dt-bindings: riscv: add Zacas ISA extension description
riscv: hwprobe: export Ztso ISA extension
riscv: add ISA extension parsing for Ztso
use linux/export.h rather than asm-generic/export.h
riscv: Remove SHADOW_OVERFLOW_STACK_SIZE macro
riscv; fix __user annotation in save_v_state()
riscv: fix __user annotation in traps_misaligned.c
riscv: Select ARCH_WANTS_NO_INSTR
riscv: Remove obsolete rv32_defconfig file
riscv: Allow disabling of BUILTIN_DTB for XIP
riscv: Fixed wrong register in XIP_FIXUP_FLASH_OFFSET macro
riscv: Make XIP bootable again
riscv: Fix set_direct_map_default_noflush() to reset _PAGE_EXEC
riscv: Fix module_alloc() that did not reset the linear mapping permissions
riscv: Fix wrong usage of lm_alias() when splitting a huge linear mapping
riscv: Check if the code to patch lies in the exit section
riscv: Use the same CPU operations for all CPUs
...
|
|
A test [1] in Android test suite started failing after [2] was merged. It
turns out that after handling a major fault under per-VMA lock, the
process major fault counter does not register that fault as major. Before
[2] read faults would be done under mmap_lock, in which case
FAULT_FLAG_TRIED flag is set before retrying. That in turn causes
mm_account_fault() to account the fault as major once retry completes.
With per-VMA locks we often retry because a fault can't be handled without
locking the whole mm using mmap_lock. Therefore such retries do not set
FAULT_FLAG_TRIED flag. This logic does not work after [2] because we can
now handle read major faults under per-VMA lock and upon retry the fact
there was a major fault gets lost. Fix this by setting FAULT_FLAG_TRIED
after retrying under per-VMA lock if VM_FAULT_MAJOR was returned. Ideally
we would use an additional VM_FAULT bit to indicate the reason for the
retry (could not handle under per-VMA lock vs other reason) but this
simpler solution seems to work, so keeping it simple.
[1] https://cs.android.com/android/platform/superproject/+/master:test/vts-testcase/kernel/api/drop_caches_prop/drop_caches_test.cpp
[2] https://lore.kernel.org/all/20231006195318.4087158-6-willy@infradead.org/
Link: https://lkml.kernel.org/r/20231226214610.109282-1-surenb@google.com
Fixes: 12214eba1992 ("mm: handle read faults under the VMA lock")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As very well explained in commit 20a004e7b017 ("arm64: mm: Use
READ_ONCE/WRITE_ONCE when accessing page tables"), an architecture whose
page table walker can modify the PTE in parallel must use
READ_ONCE()/WRITE_ONCE() macro to avoid any compiler transformation.
So apply that to riscv which is such architecture.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20231213203001.179237-5-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Patch series "Fix set_huge_pte_at()".
A recent report [1] from Ryan for arm64 revealed that we do not handle
swap entries when setting a hugepage backed by a NAPOT region (the contpte
riscv equivalent).
As explained in [1], the issue was discovered by a new test in kselftest
which uses poison entries, but the symptoms are different from arm64 though:
- the riscv kernel bugs because we do not handle VM_FAULT_HWPOISON*,
this is fixed by patch 1,
- after that, the test passes because the first pte_napot() fails (the
poison entry does not have the N bit set), and then we only set the
first page table entry covering the NAPOT hugepage, which is enough
for hugetlb_fault() to correctly raise a VM_FAULT_HWPOISON wherever we
write in this mapping since only this first page table entry is
checked
(see https://elixir.bootlin.com/linux/v6.6-rc3/source/mm/hugetlb.c#L6071).
But this seems fragile so patch 2 sets all page table entries of a
NAPOT mapping.
[1]: https://lore.kernel.org/linux-arm-kernel/20230922115804.2043771-1-ryan.roberts@arm.com/
This patch (of 2):
We used to panic when such faults were encountered but we should handle
those faults gracefully for userspace by sending a SIGBUS to the process,
like most architectures do.
Link: https://lkml.kernel.org/r/20230928151846.8229-1-alexghiti@rivosinc.com
Link: https://lkml.kernel.org/r/20230928151846.8229-2-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
handle_mm_fault returning VM_FAULT_RETRY or VM_FAULT_COMPLETED means
mmap_lock has been released. However with per-VMA locks behavior is
different and the caller should still release it. To make the rules
consistent for the caller, drop the per-VMA lock when returning
VM_FAULT_RETRY or VM_FAULT_COMPLETED. Currently the only path returning
VM_FAULT_RETRY under per-VMA locks is do_swap_page and no path returns
VM_FAULT_COMPLETED for now.
[willy@infradead.org: fix riscv]
Link: https://lkml.kernel.org/r/CAJuCfpE6GWEx1rPBmNpUfoD5o-gNFz9-UFywzCE2PbEGBiVz7g@mail.gmail.com
Link: https://lkml.kernel.org/r/20230630211957.1341547-4-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Handle most file-backed faults under the VMA lock", v3.
This patchset adds the ability to handle page faults on parts of files
which are already in the page cache without taking the mmap lock.
This patch (of 10):
Provide lock_vma_under_rcu() when CONFIG_PER_VMA_LOCK is not defined to
eliminate ifdefs in the users.
Link: https://lkml.kernel.org/r/20230724185410.1124082-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230724185410.1124082-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for ACPI
- Various cleanups to the ISA string parsing, including making them
case-insensitive
- Support for the vector extension
- Support for independent irq/softirq stacks
- Our CPU DT binding now has "unevaluatedProperties: false"
* tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits)
riscv: hibernate: remove WARN_ON in save_processor_state
dt-bindings: riscv: cpus: switch to unevaluatedProperties: false
dt-bindings: riscv: cpus: add a ref the common cpu schema
riscv: stack: Add config of thread stack size
riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK
riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK
RISC-V: always report presence of extensions formerly part of the base ISA
dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support
RISC-V: remove decrement/increment dance in ISA string parser
RISC-V: rework comments in ISA string parser
RISC-V: validate riscv,isa at boot, not during ISA string parsing
RISC-V: split early & late of_node to hartid mapping
RISC-V: simplify register width check in ISA string parsing
perf: RISC-V: Limit the number of counters returned from SBI
riscv: replace deprecated scall with ecall
riscv: uprobes: Restore thread.bad_cause
riscv: mm: try VMA lock-based page fault handling first
riscv: mm: Pre-allocate PGD entries for vmalloc/modules area
RISC-V: hwprobe: Expose Zba, Zbb, and Zbs
RISC-V: Track ISA extensions per hart
...
|
|
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Attempt VMA lock-based page fault handling first, and fall back to the
existing mmap_lock-based handling if that fails.
A simple running the ebizzy benchmark on Lichee Pi 4A shows that
PER_VMA_LOCK can improve the ebizzy benchmark by about 32.68%. In
theory, the more CPUs, the bigger improvement, but I don't have any
HW platform which has more than 4 CPUs.
This is the riscv variant of "x86/mm: try VMA lock-based page fault
handling first".
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Link: https://lore.kernel.org/r/20230523165942.2630-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The RISC-V port requires that kernel PGD entries are to be
synchronized between MMs. This is done via the vmalloc_fault()
function, that simply copies the PGD entries from init_mm to the
faulting one.
Historically, faulting in PGD entries have been a source for both bugs
[1], and poor performance.
One way to get rid of vmalloc faults is by pre-allocating the PGD
entries. Pre-allocating the entries potientially wastes 64 * 4K (65 on
SV39). The pre-allocation function is pulled from Jörg Rödel's x86
work, with the addition of 3-level page tables (PMD allocations).
The pmd_alloc() function needs the ptlock cache to be initialized
(when split page locks is enabled), so the pre-allocation is done in a
RISC-V specific pgtable_cache_init() implementation.
Pre-allocate the kernel PGD entries for the vmalloc/modules area, but
only for 64b platforms.
Link: https://lore.kernel.org/lkml/20200508144043.13893-1-joro@8bytes.org/ # [1]
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230531093817.665799-1-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for runtime detection of the Svnapot extension
- Support for Zicboz when clearing pages
- We've moved to GENERIC_ENTRY
- Support for !MMU on rv32 systems
- The linear region is now mapped via huge pages
- Support for building relocatable kernels
- Support for the hwprobe interface
- Various fixes and cleanups throughout the tree
* tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (57 commits)
RISC-V: hwprobe: Explicity check for -1 in vdso init
RISC-V: hwprobe: There can only be one first
riscv: Allow to downgrade paging mode from the command line
dt-bindings: riscv: add sv57 mmu-type
RISC-V: hwprobe: Remove __init on probe_vendor_features()
riscv: Use --emit-relocs in order to move .rela.dyn in init
riscv: Check relocations at compile time
powerpc: Move script to check relocations at compile time in scripts/
riscv: Introduce CONFIG_RELOCATABLE
riscv: Move .rela.dyn outside of init to avoid empty relocations
riscv: Prepare EFI header for relocatable kernels
riscv: Unconditionnally select KASAN_VMALLOC if KASAN
riscv: Fix ptdump when KASAN is enabled
riscv: Fix EFI stub usage of KASAN instrumented strcmp function
riscv: Move DTB_EARLY_BASE_VA to the kernel address space
riscv: Rework kasan population functions
riscv: Split early and final KASAN population functions
riscv: Use PUD/P4D/PGD pages for the linear mapping
riscv: Move the linear mapping creation in its own function
riscv: Get rid of riscv_pfn_base variable
...
|
|
This patch converts riscv to use the generic entry infrastructure from
kernel/entry/*. The generic entry makes maintainers' work easier and
codes more elegant. Here are the changes:
- More clear entry.S with handle_exception and ret_from_exception
- Get rid of complex custom signal implementation
- Move syscall procedure from assembly to C, which is much more
readable.
- Connect ret_from_fork & ret_from_kernel_thread to generic entry.
- Wrap with irqentry_enter/exit and syscall_enter/exit_from_user_mode
- Use the standard preemption code instead of custom
Suggested-by: Huacai Chen <chenhuacai@kernel.org>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Yipeng Zou <zouyipeng@huawei.com>
Tested-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Link: https://lore.kernel.org/r/20230222033021.983168-5-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Since RISC-V supports ioremap() with huge page (pud/pmd) mapping,
However, vmalloc_fault() assumes that the vmalloc range is limited
to pte mappings. To complete the vmalloc_fault() function by adding
huge page support.
Fixes: 310f541a027b ("riscv: Enable HAVE_ARCH_HUGE_VMAP for 64BIT")
Cc: stable@vger.kernel.org
Signed-off-by: Dylan Jhong <dylan@andestech.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230310075021.3919290-1-dylan@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pull VM_FAULT_RETRY fixes from Al Viro:
"Some of the page fault handlers do not deal with the following case
correctly:
- handle_mm_fault() has returned VM_FAULT_RETRY
- there is a pending fatal signal
- fault had happened in kernel mode
Correct action in such case is not "return unconditionally" - fatal
signals are handled only upon return to userland and something like
copy_to_user() would end up retrying the faulting instruction and
triggering the same fault again and again.
What we need to do in such case is to make the caller to treat that as
failed uaccess attempt - handle exception if there is an exception
handler for faulting instruction or oops if there isn't one.
Over the years some architectures had been fixed and now are handling
that case properly; some still do not. This series should fix the
remaining ones.
Status:
- m68k, riscv, hexagon, parisc: tested/acked by maintainers.
- alpha, sparc32, sparc64: tested locally - bug has been reproduced
on the unpatched kernel and verified to be fixed by this series.
- ia64, microblaze, nios2, openrisc: build, but otherwise completely
untested"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
openrisc: fix livelock in uaccess
nios2: fix livelock in uaccess
microblaze: fix livelock in uaccess
ia64: fix livelock in uaccess
sparc: fix livelock in uaccess
alpha: fix livelock in uaccess
parisc: fix livelock in uaccess
hexagon: fix livelock in uaccess
riscv: fix livelock in uaccess
m68k: fix livelock in uaccess
|
|
riscv equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Tested-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Commit 21855cac82d3 ("riscv/mm: Prevent kernel module to access user
memory without uaccess routines") added early exits/deaths for page
faults stemming from accesses to user-space without using proper
uaccess routines (where sstatus.SUM is set).
Unfortunatly, this is too strict for some BPF programs, which relies
on BPF exhandler fixups. These BPF programs loads "BTF pointers". A
BTF pointers could either be a valid kernel pointer or NULL, but not a
userspace address.
Resolve the problem by calling the fixup handler in the early exit
path.
Fixes: 21855cac82d3 ("riscv/mm: Prevent kernel module to access user memory without uaccess routines")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230214162515.184827-1-bjorn@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
RISC-V does not presently have write-only mappings as that PTE bit pattern
is considered reserved in the privileged spec, so allow handling of read
faults in VMAs that have VM_WRITE without VM_READ in order to be consistent
with other architectures that have similar limitations.
Fixes: 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid")
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220915193702.2201018-2-abrestic@rivosinc.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
I observed that for each of the shared file-backed page faults, we're very
likely to retry one more time for the 1st write fault upon no page. It's
because we'll need to release the mmap lock for dirty rate limit purpose
with balance_dirty_pages_ratelimited() (in fault_dirty_shared_page()).
Then after that throttling we return VM_FAULT_RETRY.
We did that probably because VM_FAULT_RETRY is the only way we can return
to the fault handler at that time telling it we've released the mmap lock.
However that's not ideal because it's very likely the fault does not need
to be retried at all since the pgtable was well installed before the
throttling, so the next continuous fault (including taking mmap read lock,
walk the pgtable, etc.) could be in most cases unnecessary.
It's not only slowing down page faults for shared file-backed, but also add
more mmap lock contention which is in most cases not needed at all.
To observe this, one could try to write to some shmem page and look at
"pgfault" value in /proc/vmstat, then we should expect 2 counts for each
shmem write simply because we retried, and vm event "pgfault" will capture
that.
To make it more efficient, add a new VM_FAULT_COMPLETED return code just to
show that we've completed the whole fault and released the lock. It's also
a hint that we should very possibly not need another fault immediately on
this page because we've just completed it.
This patch provides a ~12% perf boost on my aarch64 test VM with a simple
program sequentially dirtying 400MB shmem file being mmap()ed and these are
the time it needs:
Before: 650.980 ms (+-1.94%)
After: 569.396 ms (+-1.38%)
I believe it could help more than that.
We need some special care on GUP and the s390 pgfault handler (for gmap
code before returning from pgfault), the rest changes in the page fault
handlers should be relatively straightforward.
Another thing to mention is that mm_account_fault() does take this new
fault as a generic fault to be accounted, unlike VM_FAULT_RETRY.
I explicitly didn't touch hmm_vma_fault() and break_ksm() because they do
not handle VM_FAULT_RETRY even with existing code, so I'm literally keeping
them as-is.
Link: https://lkml.kernel.org/r/20220530183450.42886-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm part]
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Will Deacon <will@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Chris Zankel <chris@zankel.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since all processes share the kernel address space,
we only need to copy pgd in case of a vmalloc page
fault exception, the other levels of page tables are
shared, so the operation of copying pmd is unnecessary.
Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the DA9063 as used on the HiFive Unmatched.
- Support for relative extables, which puts us in line with other
architectures and save some space in vmlinux.
- A handful of kexec fixes/improvements, including the ability to run
crash kernels from PCI-addressable memory on the HiFive Unmatched.
- Support for the SBI SRST extension, which allows systems that do not
have an explicit driver in Linux to reboot.
- A handful of fixes and cleanups, including to the defconfigs and
device trees.
* tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
RISC-V: Use SBI SRST extension when available
riscv: mm: fix wrong phys_ram_base value for RV64
RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n
riscv: head: remove useless __PAGE_ALIGNED_BSS and .balign
riscv: errata: alternative: mark vendor_patch_func __initdata
riscv: head: make secondary_start_common() static
riscv: remove cpu_stop()
riscv: try to allocate crashkern region from 32bit addressible memory
riscv: use hart id instead of cpu id on machine_kexec
riscv: Don't use va_pa_offset on kdump
riscv: dts: sifive: fu540-c000: Fix PLIC node
riscv: dts: sifive: fu540-c000: Drop bogus soc node compatible values
riscv: dts: sifive: Group tuples in register properties
riscv: dts: sifive: Group tuples in interrupt properties
riscv: dts: microchip: mpfs: Group tuples in interrupt properties
riscv: dts: microchip: mpfs: Fix clock controller node
riscv: dts: microchip: mpfs: Fix reference clock node
riscv: dts: microchip: mpfs: Fix PLIC node
riscv: dts: microchip: mpfs: Drop empty chosen node
riscv: dts: canaan: Group tuples in interrupt properties
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
|
|
Since commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple
times") allowed VM_FAULT_RETRY for multiple times, the
FAULT_FLAG_ALLOW_RETRY bit of fault_flag will not be changed in the page
fault path, so the following check is no longer needed:
flags & FAULT_FLAG_ALLOW_RETRY
So just remove it.
[akpm@linux-foundation.org: coding style fixes]
Link: https://lkml.kernel.org/r/20211110123358.36511-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Peter Xu <peterx@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We used to define VMALLOC_END equal to the start of the next region
*minus one* which is inconsistent with the use of this define in the
core code (for example, see the definitions of VMALLOC_TOTAL and
is_vmalloc_addr).
And then make the definition of VMEMMAP_END consistent with VMALLOC_END
and all other regions actually.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
There are two big uses of do_exit. The first is it's design use to be
the guts of the exit(2) system call. The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.
Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure. In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.
Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.
As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Add architecture specific implementation details for KFENCE and enable
KFENCE for the riscv64 architecture. In particular, this implements the
required interface in <asm/kfence.h>.
KFENCE requires that attributes for pages from its memory pool can
individually be set. Therefore, force the kfence pool to be mapped at
page granularity.
Testing this patch using the testcases in kfence_test.c and all passed.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the memtest= kernel command-line argument.
- Support for building the kernel with FORTIFY_SOURCE.
- Support for generic clockevent broadcasts.
- Support for the buildtar build target.
- Some build system cleanups to pass more LLVM-friendly arguments.
- Support for kprobes.
- A rearranged kernel memory map, the first part of supporting sv48
systems.
- Improvements to kexec, along with support for kdump and crash
kernels.
- An alternatives-based errata framework, along with support for
handling a pair of errata that manifest on some SiFive designs
(including the HiFive Unmatched).
- Support for XIP.
- A device tree for the Microchip PolarFire ICICLE SoC and associated
dev board.
... along with a bunch of cleanups. There are already a handful of fixes
on the list so there will likely be a part 2.
* tag 'riscv-for-linus-5.13-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (45 commits)
RISC-V: Always define XIP_FIXUP
riscv: Remove 32b kernel mapping from page table dump
riscv: Fix 32b kernel build with CONFIG_DEBUG_VIRTUAL=y
RISC-V: Fix error code returned by riscv_hartid_to_cpuid()
RISC-V: Enable Microchip PolarFire ICICLE SoC
RISC-V: Initial DTS for Microchip ICICLE board
dt-bindings: riscv: microchip: Add YAML documentation for the PolarFire SoC
RISC-V: Add Microchip PolarFire SoC kconfig option
RISC-V: enable XIP
RISC-V: Add crash kernel support
RISC-V: Add kdump support
RISC-V: Improve init_resources()
RISC-V: Add kexec support
RISC-V: Add EM_RISCV to kexec UAPI header
riscv: vdso: fix and clean-up Makefile
riscv/mm: Use BUG_ON instead of if condition followed by BUG.
riscv/kprobe: fix kernel panic when invoking sys_read traced by kprobe
riscv: Set ARCH_HAS_STRICT_MODULE_RWX if MMU
riscv: module: Create module allocations without exec permissions
riscv: bpf: Avoid breaking W^X
...
|
|
This is a preparatory patch for relocatable kernel and sv48 support.
The kernel used to be linked at PAGE_OFFSET address therefore we could use
the linear mapping for the kernel mapping. But the relocated kernel base
address will be different from PAGE_OFFSET and since in the linear mapping,
two different virtual addresses cannot point to the same physical address,
the kernel mapping needs to lie outside the linear mapping so that we don't
have to copy it at the same physical offset.
The kernel mapping is moved to the last 2GB of the address space, BPF
is now always after the kernel and modules use the 2GB memory range right
before the kernel, so BPF and modules regions do not overlap. KASLR
implementation will simply have to move the kernel in the last 2GB range
and just take care of leaving enough space for BPF.
In addition, by moving the kernel to the end of the address space, both
sv39 and sv48 kernels will be exactly the same without needing to be
relocated at runtime.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
[Palmer: Squash the STRICT_RWX fix, and a !MMU fix]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
These two functions are used to implement the kprobes feature so they
can't be kprobed.
Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
Cc: stable@vger.kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
This patch adds support for uprobes on riscv architecture.
Just like kprobe, it support single-step and simulate instructions.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
This patch enables "kprobe & kretprobe" to work with ftrace
interface. It utilized software breakpoint as single-step
mechanism.
Some instructions which can't be single-step executed must be
simulated in kernel execution slot, such as: branch, jal, auipc,
la ...
Some instructions should be rejected for probing and we use a
blacklist to filter, such as: ecall, ebreak, ...
We use ebreak & c.ebreak to replace origin instruction and the
kprobe handler prepares an executable memory slot for out-of-line
execution with a copy of the original instruction being probed.
In execution slot we add ebreak behind original instruction to
simulate a single-setp mechanism.
The patch is based on packi's work [1] and csky's work [2].
- The kprobes_trampoline.S is all from packi's patch
- The single-step mechanism is new designed for riscv without hw
single-step trap
- The simulation codes are from csky
- Frankly, all codes refer to other archs' implementation
[1] https://lore.kernel.org/linux-riscv/20181113195804.22825-1-me@packi.ch/
[2] https://lore.kernel.org/linux-csky/20200403044150.20562-9-guoren@kernel.org/
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Patrick Stählin <me@packi.ch>
Signed-off-by: Patrick Stählin <me@packi.ch>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Patrick Stählin <me@packi.ch>
Cc: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
We found this issue in an legacy out-of-tree kernel module
which didn't properly access user space pointer by get/put_user().
Such an illegal access loops in the page fault handler.
To resolve this, let it die here.
Signed-off-by: Eric Lin <tesheng@andestech.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Like arm64, this patch adds a die_kernel_fault() helper
to ensure the same semantics for the different kernel faults.
Signed-off-by: Eric Lin <tesheng@andestech.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The argument to pfn_to_virt() should be pfn not the value of CSR_SATP.
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: liush <liush@allwinnertech.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
If the page fault "cause" is EXC_INST_PAGE_FAULT, set the
FAULT_FLAG_INSTRUCTION flag to let handle_mm_fault() and friends know
about it. This has no functional changes because RISC-V uses the default
arch_vma_access_permitted() implementation, which always returns true.
However, dax_pmd_fault(), for example, has a tracepoint that uses
FAULT_FLAG_INSTRUCTION, so we might as well set it.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The "inline" keyword is in the wrong place in vmalloc_fault()
declaration:
>> arch/riscv/mm/fault.c:56:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
56 | static void inline vmalloc_fault(struct pt_regs *regs, int code, unsigned long addr)
| ^~~~~~
Fix that up.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Move the access error check into a access_error() function to simplify
the control flow in do_page_fault().
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Let's handle the translation of EXC_STORE_PAGE_FAULT to FAULT_FLAG_WRITE
once before looking up the VMA. This makes it easier to extract access
error logic in the next patch.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Simplify the mm_fault_error() handling function by eliminating the
unnecessary gotos.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
This patch moves the fault error handling to mm_fault_error() function
and converts gotos to calls to the new function.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Move fault error handling after retry logic. This simplifies the code
flow and makes it easier to move fault error handling to its own
function.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
This patch moves the vmalloc fault handling in do_page_fault() to
vmalloc_fault() function and converts gotos to calls to the new
function.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
This patch moves the bad area handling in do_page_fault() to bad_area()
function and converts gotos to calls to the new function.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
This patch moves the no context handling in do_page_fault() to
no_context() function and converts gotos to calls to the new function.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Let's combine the two retry logic if statements in do_page_fault() to
simplify the code.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Use the general page fault accounting by passing regs into
handle_mm_fault(). It naturally solve the issue of multiple page fault
accounting when page fault retry happened.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Link: http://lkml.kernel.org/r/20200707225021.200906-18-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
