| Age | Commit message (Collapse) | Author |
|---|
|
snps,dw-apb-gpio-port devices
snps,dw-apb-gpio-port is deprecated since commit ef42a8da3cf3
("dt-bindings: gpio: dwapb: Add ngpios property support"). The
respective driver supports this since commit 7569486d79ae ("gpio: dwapb:
Add ngpios DT-property support") which is included in Linux v5.10-rc1.
This change was created using
git grep -l snps,nr-gpios arch/riscv/boot/dts | xargs perl -p -i -e 's/\bsnps,nr-gpios\b/ngpios/
.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Fixes: a508d794f86e ("riscv: sophgo: dts: add gpio controllers for SG2042 SoC")
Link: https://lore.kernel.org/r/20241022091428.477697-8-u.kleine-koenig@baylibre.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Samuel Holland <samuel.holland@sifive.com> says:
RISC-V defines three extensions for pointer masking[1]:
- Smmpm: configured in M-mode, affects M-mode
- Smnpm: configured in M-mode, affects the next lower mode (S or U-mode)
- Ssnpm: configured in S-mode, affects the next lower mode (VS, VU, or U-mode)
This series adds support for configuring Smnpm or Ssnpm (depending on
which privilege mode the kernel is running in) to allow pointer masking
in userspace (VU or U-mode), extending the PR_SET_TAGGED_ADDR_CTRL API
from arm64. Unlike arm64 TBI, userspace pointer masking is not enabled
by default on RISC-V. Additionally, the tag width (referred to as PMLEN)
is variable, so userspace needs to ask the kernel for a specific tag
width, which is interpreted as a lower bound on the number of tag bits.
This series also adds support for a tagged address ABI similar to arm64
and x86. Since accesses from the kernel to user memory use the kernel's
pointer masking configuration, not the user's, the kernel must untag
user pointers in software before dereferencing them. And since the tag
width is variable, as with LAM on x86, it must be kept the same across
all threads in a process so untagged_addr_remote() can work.
[1]: https://github.com/riscv/riscv-j-extension/raw/d70011dde6c2/zjpm-spec.pdf
* b4-shazam-merge:
KVM: riscv: selftests: Add Smnpm and Ssnpm to get-reg-list test
RISC-V: KVM: Allow Smnpm and Ssnpm extensions for guests
riscv: hwprobe: Export the Supm ISA extension
riscv: selftests: Add a pointer masking test
riscv: Allow ptrace control of the tagged address ABI
riscv: Add support for the tagged address ABI
riscv: Add support for userspace pointer masking
riscv: Add CSR definitions for pointer masking
riscv: Add ISA extension parsing for pointer masking
dt-bindings: riscv: Add pointer masking ISA extensions
Link: https://lore.kernel.org/r/20241016202814.4061541-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The interface for controlling pointer masking in VS-mode is henvcfg.PMM,
which is part of the Ssnpm extension, even though pointer masking in
HS-mode is provided by the Smnpm extension. As a result, emulating Smnpm
in the guest requires (only) Ssnpm on the host.
The guest configures Smnpm through the SBI Firmware Features extension,
which KVM does not yet implement, so currently the ISA extension has no
visible effect on the guest, and thus it cannot be disabled. Ssnpm is
configured using the senvcfg CSR within the guest, so that extension
cannot be hidden from the guest without intercepting writes to the CSR.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20241016202814.4061541-10-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Supm is a virtual ISA extension defined in the RISC-V Pointer Masking
specification, which indicates that pointer masking is available in
U-mode. It can be provided by either Smnpm or Ssnpm, depending on which
mode the kernel runs in. Userspace should not care about this
distinction, so export Supm instead of either underlying extension.
Hide the extension if the kernel was compiled without support for the
pointer masking prctl() interface.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241016202814.4061541-9-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This allows a tracer to control the ABI of the tracee, as on arm64.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241016202814.4061541-7-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When pointer masking is enabled for userspace, the kernel can accept
tagged pointers as arguments to some system calls. Allow this by
untagging the pointers in access_ok() and the uaccess routines. The
uaccess routines must peform untagging in software because U-mode and
S-mode have entirely separate pointer masking configurations. In fact,
hardware may not even implement pointer masking for S-mode.
Since the number of tag bits is variable, untagged_addr_remote() needs
to know what PMLEN to use for the remote mm. Therefore, the pointer
masking mode must be the same for all threads sharing an mm. Enforce
this with a lock flag in the mm context, as x86 does for LAM. The flag
gets reset in init_new_context() during fork(), as the new mm is no
longer multithreaded.
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241016202814.4061541-6-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
RISC-V supports pointer masking with a variable number of tag bits
(which is called "PMLEN" in the specification) and which is configured
at the next higher privilege level.
Wire up the PR_SET_TAGGED_ADDR_CTRL and PR_GET_TAGGED_ADDR_CTRL prctls
so userspace can request a lower bound on the number of tag bits and
determine the actual number of tag bits. As with arm64's
PR_TAGGED_ADDR_ENABLE, the pointer masking configuration is
thread-scoped, inherited on clone() and fork() and cleared on execve().
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241016202814.4061541-5-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pointer masking is controlled via a two-bit PMM field, which appears in
various CSRs depending on which extensions are implemented. Smmpm adds
the field to mseccfg; Smnpm adds the field to menvcfg; Ssnpm adds the
field to senvcfg. If the H extension is implemented, Ssnpm also defines
henvcfg.PMM and hstatus.HUPMM.
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241016202814.4061541-4-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The RISC-V Pointer Masking specification defines three extensions:
Smmpm, Smnpm, and Ssnpm. Add support for parsing each of them. The
specific extension which provides pointer masking support to userspace
(Supm) depends on the kernel's privilege mode, so provide a macro to
abstract this selection.
Smmpm implies the existence of the mseccfg CSR. As it is the only user
of this CSR so far, there is no need for an Xlinuxmseccfg extension.
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241016202814.4061541-3-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The first is a fix and the second a check to make sure we don't
regress on the relocations, so I'm picking this up as a series to get
the fix into fixes.
* b4-shazam-merge:
riscv: Check that vdso does not contain any dynamic relocations
riscv: vdso: Prevent the compiler from inserting calls to memset()
Link: https://lore.kernel.org/r/20241016083625.136311-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Like other architectures, use the common cmd_vdso_check to make sure of
that.
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20241016083625.136311-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The compiler is smart enough to insert a call to memset() in
riscv_vdso_get_cpus(), which generates a dynamic relocation.
So prevent this by using -fno-builtin option.
Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20241016083625.136311-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Improve function of Star64 bottom network port phy0 with updated delay values.
Initial upstream patches supporting Star64 use the same vendor board support
package parameters known to result in an unreliable bottom network port.
Success acquiring DHCP lease and no dropped packets to ping LAN address:
rx 900: tx 1500 1650 1800 1950
rx 750: tx 1650 1800 1950
rx 600: tx 1800 1950
rx 1050: tx 1650 1800 1950
rx 1200: tx 1500 1650 1800 1950
rx 1350: tx 1500 1650 1800 1950
rx 1500: tx 1500 1650 1800 1950
rx 1650: tx 1500 1650 1800 1950
rx 1800: tx 1500 1650 1800 1950
rx 1900: tx 1950
rx 1950: tx 1950
Failure acquiring DHCP lease or many dropped packets:
rx 450: tx 1500 1800 1950
rx 600: tx 1200 1350 1650
rx 750: tx 1350 1500
rx 900: tx 1200 1350
rx 1050: tx 1050 1200 1350 1500
rx 1200: tx 1350
rx 1350: tx 1350
rx 1500: tx 1200 1350
rx 1650: tx 1050 1200 1350
rx 1800: tx 1050 1200 1350
rx 1900: tx 1500 1650 1800
rx 1950: tx 1200 1350
Non-functional:
rx 0: tx 0 150 300 450 600 750 900 1050 1200 1350 1500 1650 1800 1950
rx 150: tx 0 150 300 450 600 750 900 1050 1200 1350 1500 1650 1800 1950
rx 300: tx 0 150 300 450 600 750 900 1050 1200 1350 1500 1650 1800 1950
rx 450: tx 0 150 300 450 600 750 900 1050 1200 1350 1650
rx 600: tx 0 150 300 450 600 750 900 1050
rx 750: tx 0 150 300 450 600 750 900 1050 1200
rx 900: tx 0 150 300 450 600 750 900 1050
rx 1050: tx 0 150 300 450 600 750 900
rx 1200: tx 0 150 300 450 600 750 900 1050 1200
rx 1350: tx 0 150 300 450 600 750 900 1050 1200
rx 1500: tx 0 150 300 450 600 750 900 1050
rx 1650: tx 0 150 300 450 600 750 900
rx 1800: tx 0 150 300 450 600 750 900
rx 1900: tx 0 150 300 450 600 750 900 1050 1200 1350
rx 1950: tx 0 150 300 450 600 750 900 1050
Selecting the median of all working rx delay values 1500 combined with tx delay
values 1500, 1650, 1800, and 1950 only the tx delay value of 1950 (default) is
reliable as tested in both Linux 6.11.2 and U-Boot v2024.10
Signed-off-by: E Shattow <e@freeshell.de>
CC: stable@vger.kernel.org
Fixes: 2606bf583b962 ("riscv: dts: starfive: add Star64 board devicetree")
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
There is a power button on the front panel of the pioneer box.
Short pressing the button will trigger the onboard MCU to
notify SG2042 through GPIO22 to enter the power-off process.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/12e65a99f1b52c52b7372e900a203063b30c74b5.1728350655.git.unicorn_wang@outlook.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
|
|
Add SARADC node for the Successive Approximation Analog to
Digital Converter used in Sophgo CV1800B SoC.
This patch only adds the active domain controller.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/r/20240829-sg2002-adc-v5-3-aacb381e869b@bootlin.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
LicheeRV Nano B [1] is an embedded development platform based on the SOPHGO
SG2002 chip, the B(ase) version is deprived of Wifi/Bluetooth and Ethernet.
Add only support for UART and SDHCI.
Link: https://wiki.sipeed.com/hardware/en/lichee/RV_Nano/1_intro.html [1]
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/r/20241010-sg2002-v5-2-a0f2e582b932@bootlin.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Add initial device tree for the SG2002 RISC-V SoC by SOPHGO.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/r/20241010-sg2002-v5-1-a0f2e582b932@bootlin.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix the guest view of the ID registers, making the relevant fields
writable from userspace (affecting ID_AA64DFR0_EL1 and
ID_AA64PFR1_EL1)
- Correcly expose S1PIE to guests, fixing a regression introduced in
6.12-rc1 with the S1POE support
- Fix the recycling of stage-2 shadow MMUs by tracking the context
(are we allowed to block or not) as well as the recycling state
- Address a couple of issues with the vgic when userspace
misconfigures the emulation, resulting in various splats. Headaches
courtesy of our Syzkaller friends
- Stop wasting space in the HYP idmap, as we are dangerously close to
the 4kB limit, and this has already exploded in -next
- Fix another race in vgic_init()
- Fix a UBSAN error when faking the cache topology with MTE enabled
RISCV:
- RISCV: KVM: use raw_spinlock for critical section in imsic
x86:
- A bandaid for lack of XCR0 setup in selftests, which causes trouble
if the compiler is configured to have x86-64-v3 (with AVX) as the
default ISA. Proper XCR0 setup will come in the next merge window.
- Fix an issue where KVM would not ignore low bits of the nested CR3
and potentially leak up to 31 bytes out of the guest memory's
bounds
- Fix case in which an out-of-date cached value for the segments
could by returned by KVM_GET_SREGS.
- More cleanups for KVM_X86_QUIRK_SLOT_ZAP_ALL
- Override MTRR state for KVM confidential guests, making it WB by
default as is already the case for Hyper-V guests.
Generic:
- Remove a couple of unused functions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (27 commits)
RISCV: KVM: use raw_spinlock for critical section in imsic
KVM: selftests: Fix out-of-bounds reads in CPUID test's array lookups
KVM: selftests: x86: Avoid using SSE/AVX instructions
KVM: nSVM: Ignore nCR3[4:0] when loading PDPTEs from memory
KVM: VMX: reset the segment cache after segment init in vmx_vcpu_reset()
KVM: x86: Clean up documentation for KVM_X86_QUIRK_SLOT_ZAP_ALL
KVM: x86/mmu: Add lockdep assert to enforce safe usage of kvm_unmap_gfn_range()
KVM: x86/mmu: Zap only SPs that shadow gPTEs when deleting memslot
x86/kvm: Override default caching mode for SEV-SNP and TDX
KVM: Remove unused kvm_vcpu_gfn_to_pfn_atomic
KVM: Remove unused kvm_vcpu_gfn_to_pfn
KVM: arm64: Ensure vgic_ready() is ordered against MMIO registration
KVM: arm64: vgic: Don't check for vgic_ready() when setting NR_IRQS
KVM: arm64: Fix shift-out-of-bounds bug
KVM: arm64: Shave a few bytes from the EL2 idmap code
KVM: arm64: Don't eagerly teardown the vgic on init error
KVM: arm64: Expose S1PIE to guests
KVM: arm64: nv: Clarify safety of allowing TLBI unmaps to reschedule
KVM: arm64: nv: Punt stage-2 recycling to a vCPU request
KVM: arm64: nv: Do not block when unmapping stage-2 if disallowed
...
|
|
For the external interrupt updating procedure in imsic, there was a
spinlock to protect it already. But since it should not be preempted in
any cases, we should turn to use raw_spinlock to prevent any preemption
in case PREEMPT_RT was enabled.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Reviewed-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Message-ID: <20240919160126.44487-1-cyan.yang@sifive.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull bpf fixes from Daniel Borkmann:
- Fix BPF verifier to not affect subreg_def marks in its range
propagation (Eduard Zingerman)
- Fix a truncation bug in the BPF verifier's handling of
coerce_reg_to_size_sx (Dimitar Kanaliev)
- Fix the BPF verifier's delta propagation between linked registers
under 32-bit addition (Daniel Borkmann)
- Fix a NULL pointer dereference in BPF devmap due to missing rxq
information (Florian Kauer)
- Fix a memory leak in bpf_core_apply (Jiri Olsa)
- Fix an UBSAN-reported array-index-out-of-bounds in BTF parsing for
arrays of nested structs (Hou Tao)
- Fix build ID fetching where memory areas backing the file were
created with memfd_secret (Andrii Nakryiko)
- Fix BPF task iterator tid filtering which was incorrectly using pid
instead of tid (Jordan Rome)
- Several fixes for BPF sockmap and BPF sockhash redirection in
combination with vsocks (Michal Luczaj)
- Fix riscv BPF JIT and make BPF_CMPXCHG fully ordered (Andrea Parri)
- Fix riscv BPF JIT under CONFIG_CFI_CLANG to prevent the possibility
of an infinite BPF tailcall (Pu Lehui)
- Fix a build warning from resolve_btfids that bpf_lsm_key_free cannot
be resolved (Thomas Weißschuh)
- Fix a bug in kfunc BTF caching for modules where the wrong BTF object
was returned (Toke Høiland-Jørgensen)
- Fix a BPF selftest compilation error in cgroup-related tests with
musl libc (Tony Ambardar)
- Several fixes to BPF link info dumps to fill missing fields (Tyrone
Wu)
- Add BPF selftests for kfuncs from multiple modules, checking that the
correct kfuncs are called (Simon Sundberg)
- Ensure that internal and user-facing bpf_redirect flags don't overlap
(Toke Høiland-Jørgensen)
- Switch to use kvzmalloc to allocate BPF verifier environment (Rik van
Riel)
- Use raw_spinlock_t in BPF ringbuf to fix a sleep in atomic splat
under RT (Wander Lairson Costa)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (38 commits)
lib/buildid: Handle memfd_secret() files in build_id_parse()
selftests/bpf: Add test case for delta propagation
bpf: Fix print_reg_state's constant scalar dump
bpf: Fix incorrect delta propagation between linked registers
bpf: Properly test iter/task tid filtering
bpf: Fix iter/task tid filtering
riscv, bpf: Make BPF_CMPXCHG fully ordered
bpf, vsock: Drop static vsock_bpf_prot initialization
vsock: Update msg_count on read_skb()
vsock: Update rx_bytes on read_skb()
bpf, sockmap: SK_DROP on attempted redirects of unsupported af_vsock
selftests/bpf: Add asserts for netfilter link info
bpf: Fix link info netfilter flags to populate defrag flag
selftests/bpf: Add test for sign extension in coerce_subreg_to_size_sx()
selftests/bpf: Add test for truncation after sign extension in coerce_reg_to_size_sx()
bpf: Fix truncation bug in coerce_reg_to_size_sx()
selftests/bpf: Assert link info uprobe_multi count & path_size if unset
bpf: Fix unpopulated path_size when uprobe_multi fields unset
selftests/bpf: Fix cross-compiling urandom_read
selftests/bpf: Add test for kfunc module order
...
|
|
accesses"
Charlie Jenkins <charlie@rivosinc.com> says:
Adds support for detecting and reporting the speed of unaligned vector
accesses on RISC-V CPUs. Adds vec_misaligned_speed key to the hwprobe
adds Zicclsm to cpufeature and fixes the check for scalar unaligned
emulated all CPUs. The vec_misaligned_speed key keeps the same format
as the scalar unaligned access speed key.
This set does not emulate unaligned vector accesses on CPUs that do not
support them. Only reports if userspace can run them and speed of
unaligned vector accesses if supported.
* b4-shazam-merge:
RISC-V: hwprobe: Document unaligned vector perf key
RISC-V: Report vector unaligned access speed hwprobe
RISC-V: Detect unaligned vector accesses supported
RISC-V: Replace RISCV_MISALIGNED with RISCV_SCALAR_MISALIGNED
RISC-V: Scalar unaligned access emulated on hotplug CPUs
RISC-V: Check scalar unaligned access on all CPUs
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-0-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Detect if vector misaligned accesses are faster or slower than
equivalent vector byte accesses. This is useful for usermode to know
whether vector byte accesses or vector misaligned accesses have a better
bandwidth for operations like memcpy.
Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-5-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Run an unaligned vector access to test if the system supports
vector unaligned access. Add the result to a new key in hwprobe.
This is useful for usermode to know if vector misaligned accesses are
supported and if they are faster or slower than equivalent byte accesses.
Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-4-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Replace RISCV_MISALIGNED with RISCV_SCALAR_MISALIGNED to allow
for the addition of RISCV_VECTOR_MISALIGNED in a later patch.
Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-3-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The check_unaligned_access_emulated() function should have been called
during CPU hotplug to ensure that if all CPUs had emulated unaligned
accesses, the new CPU also does.
This patch adds the call to check_unaligned_access_emulated() in
the hotplug path.
Fixes: 55e0bf49a0d0 ("RISC-V: Probe misaligned access speed in parallel")
Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-2-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Originally, the check_unaligned_access_emulated_all_cpus function
only checked the boot hart. This fixes the function to check all
harts.
Fixes: 71c54b3d169d ("riscv: report misaligned accesses emulation to hwprobe")
Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-1-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Aurelien reported probe failures due to the csi node being enabled
without having a camera attached to it. A camera was in the initial
submissions, but was removed from the dts, as it had not actually been
present on the board, but was from an addon board used by the
developer of the relevant drivers. The non-camera pipeline nodes were
not disabled when this happened and the probe failures are problematic
for Debian. Disable them.
CC: stable@vger.kernel.org
Fixes: 28ecaaa5af192 ("riscv: dts: starfive: jh7110: Add camera subsystem nodes")
Closes: https://lore.kernel.org/all/Zw1-vcN4CoVkfLjU@aurel32.net/
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
According to the prototype formal BPF memory consistency model
discussed e.g. in [1] and following the ordering properties of
the C/in-kernel macro atomic_cmpxchg(), a BPF atomic operation
with the BPF_CMPXCHG modifier is fully ordered. However, the
current RISC-V JIT lowerings fail to meet such memory ordering
property. This is illustrated by the following litmus test:
BPF BPF__MP+success_cmpxchg+fence
{
0:r1=x; 0:r3=y; 0:r5=1;
1:r2=y; 1:r4=f; 1:r7=x;
}
P0 | P1 ;
*(u64 *)(r1 + 0) = 1 | r1 = *(u64 *)(r2 + 0) ;
r2 = cmpxchg_64 (r3 + 0, r4, r5) | r3 = atomic_fetch_add((u64 *)(r4 + 0), r5) ;
| r6 = *(u64 *)(r7 + 0) ;
exists (1:r1=1 /\ 1:r6=0)
whose "exists" clause is not satisfiable according to the BPF
memory model. Using the current RISC-V JIT lowerings, the test
can be mapped to the following RISC-V litmus test:
RISCV RISCV__MP+success_cmpxchg+fence
{
0:x1=x; 0:x3=y; 0:x5=1;
1:x2=y; 1:x4=f; 1:x7=x;
}
P0 | P1 ;
sd x5, 0(x1) | ld x1, 0(x2) ;
L00: | amoadd.d.aqrl x3, x5, 0(x4) ;
lr.d x2, 0(x3) | ld x6, 0(x7) ;
bne x2, x4, L01 | ;
sc.d x6, x5, 0(x3) | ;
bne x6, x4, L00 | ;
fence rw, rw | ;
L01: | ;
exists (1:x1=1 /\ 1:x6=0)
where the two stores in P0 can be reordered. Update the RISC-V
JIT lowerings/implementation of BPF_CMPXCHG to emit an SC with
RELEASE ("rl") annotation in order to meet the expected memory
ordering guarantees. The resulting RISC-V JIT lowerings of
BPF_CMPXCHG match the RISC-V lowerings of the C atomic_cmpxchg().
Other lowerings were fixed via 20a759df3bba ("riscv, bpf: make
some atomic operations fully ordered").
Fixes: dd642ccb45ec ("riscv, bpf: Implement more atomic operations for RV64")
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lpc.events/event/18/contributions/1949/attachments/1665/3441/bpfmemmodel.2024.09.19p.pdf [1]
Link: https://lore.kernel.org/bpf/20241017143628.2673894-1-parri.andrea@gmail.com
|
|
Enable gpio-dwapb driver which is used by TH1520-based boards like the
BeagleV Ahead and the Sipeed LicheePi 4A.
Signed-off-by: Drew Fustini <drew@pdp7.com>
Link: https://lore.kernel.org/r/20241014205315.1349391-1-drew@pdp7.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The VDSO implementation includes headers from outside of the
vdso/ namespace.
Introduce vdso/page.h to make sure that the generic library
uses only the allowed namespace.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Link: https://lore.kernel.org/all/20241014151340.1639555-3-vincenzo.frascino@arm.com
|
|
There are currently no nodes that use spi0 so remove the enabled
property for it in the beaglev ahead and lpi4a dts files. It can be
re-enabled in the future if any peripherals will use it. The definition
of spi0 remains in the th1520.dtsi file.
Suggested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|
|
The gpio-dwapb looks for clock named "bus" so add clock-names property
for the gpio controller nodes.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
[dfustini: add two more lines to the commit message]
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|
|
Add nodes for the 5 user controllable LEDs on the BeagleV Ahead board.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|
|
Add pinctrl settings for UART0 used as the default debug console on
both the Lichee Pi 4A and BeagleV Ahead boards.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|
|
Add names for the GPIO00-GPIO14 lines of the SO-DIMM module.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|
|
Adjust labels for the TH1520 GPIO controllers such that GPIOs can be
referenced by the names used by the documentation. Eg.
GPIO0_X -> <&gpio0 X Y>
GPIO1_X -> <&gpio1 X Y>
GPIO2_X -> <&gpio2 X Y>
GPIO3_X -> <&gpio3 X Y>
GPIO4_X -> <&gpio4 X Y>
AOGPIO_X -> <&aogpio X Y>
Remove labels for the parent GPIO devices that shouldn't need to be
referenced.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|
|
Add gpio-ranges properties to the TH1520 device tree, so user space can
change basic pinconf settings for GPIOs and are not allowed to use pads
already used by other functions.
Adjust number of GPIOs available for the different controllers.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|
|
Add nodes for pin controllers on the T-Head TH1520 RISC-V SoC.
Add the missing aonsys_clk for the always-on pin controller as there is
not yet an aon subsys clock controller driver.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
[dfustini: modify description as there is now an ap_subsys clk driver]
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|
|
Since the generic VDSO clock mode storage is used, this header file is
unused and can be removed.
This avoids including a non-VDSO header while building the VDSO,
which can lead to compilation errors.
Also drop the comment which is out of date and in the wrong place.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-arch_update_vsyscall-v1-5-7fe5a3ea4382@linutronix.de
|
|
Most architectures use pt_regs within ftrace_regs making a lot of the
accessor functions just calls to the pt_regs internally. Instead of
duplication this effort, use a HAVE_ARCH_FTRACE_REGS for architectures
that have their own ftrace_regs that is not based on pt_regs and will
define all the accessor functions, and for the architectures that just use
pt_regs, it will leave it undefined, and the default accessor functions
will be used.
Note, this will also make it easier to add new accessor functions to
ftrace_regs as it will mean having to touch less architectures.
Cc: <linux-arch@vger.kernel.org>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/20241010202114.2289f6fd@gandalf.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # powerpc
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
ftrace_regs was created to hold registers that store information to save
function parameters, return value and stack. Since it is a subset of
pt_regs, it should only be used by its accessor functions. But because
pt_regs can easily be taken from ftrace_regs (on most archs), it is
tempting to use it directly. But when running on other architectures, it
may fail to build or worse, build but crash the kernel!
Instead, make struct ftrace_regs an empty structure and have the
architectures define __arch_ftrace_regs and all the accessor functions
will typecast to it to get to the actual fields. This will help avoid
usage of ftrace_regs directly.
Link: https://lore.kernel.org/all/20241007171027.629bdafd@gandalf.local.home/
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/20241008230628.958778821@goodmis.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When CONFIG_CFI_CLANG is enabled, the number of prologue instructions
skipped by tailcall needs to include the kcfi instruction, otherwise the
TCC will be initialized every tailcall is called, which may result in
infinite tailcalls.
Fixes: e63985ecd226 ("bpf, riscv64/cfi: Support kCFI + BPF on riscv64")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20241008124544.171161-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Enable Renesas at25ql128a flash connected to QSPI0. Also disable
the node from rzfive-smarc-som as it is untested.
Tested the flash by flashing bootloaders:
flash_erase /dev/mtd0 0 0
flash_erase /dev/mtd1 0 0
mtd_debug write /dev/mtd0 0 ${BL2_FILE_SIZE} ${BL2_IMAGE}
mtd_debug write /dev/mtd1 512 ${FIP_FILE_SIZE} ${FIP_IMAGE}
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241004173235.74307-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Now that the [ms]envcfg CSR value is maintained per thread, not per
hart, riscv_user_isa_enable() only needs to be called once during boot,
to set the value for the init task. This also allows it to be marked as
__init.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240814081126.956287-4-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Some bits in the [ms]envcfg CSR, such as the CFI state and pointer
masking mode, need to be controlled on a per-thread basis. Support this
by keeping a copy of the CSR value in struct thread_struct and writing
it during context switches. It is safe to discard the old CSR value
during the context switch because the CSR is modified only by software,
so the CSR will remain in sync with the copy in thread_struct.
Use ALTERNATIVE directly instead of riscv_has_extension_unlikely() to
minimize branchiness in the context switching code.
Since thread_struct is copied during fork(), setting the value for the
init task sets the default value for all other threads.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240814081126.956287-3-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, we enable cbo.zero for usermode on each hart that supports
the Zicboz extension. This means that the [ms]envcfg CSR value may
differ between harts. Other features, such as pointer masking and CFI,
require setting [ms]envcfg bits on a per-thread basis. The combination
of these two adds quite some complexity and overhead to context
switching, as we would need to maintain two separate masks for the
per-hart and per-thread bits. Andrew Jones, who originally added Zicboz
support, writes[1][2]:
I've approached Zicboz the same way I would approach all
extensions, which is to be per-hart. I'm not currently aware of
a platform that is / will be composed of harts where some have
Zicboz and others don't, but there's nothing stopping a platform
like that from being built.
So, how about we add code that confirms Zicboz is on all harts.
If any hart does not have it, then we complain loudly and disable
it on all the other harts. If it was just a hardware description
bug, then it'll get fixed. If there's actually a platform which
doesn't have Zicboz on all harts, then, when the issue is reported,
we can decide to not support it, support it with defconfig, or
support it under a Kconfig guard which must be enabled by the user.
Let's follow his suggested solution and require the extension to be
available on all harts, so the envcfg CSR value does not need to change
when a thread migrates between harts. Since we are doing this for all
extensions with fields in envcfg, the CSR itself only needs to be saved/
restored when it is present on all harts.
This should not be a regression as no known hardware has asymmetric
Zicboz support, but if anyone reports seeing the warning, we will
re-evaluate our solution.
Link: https://lore.kernel.org/linux-riscv/20240322-168f191eeb8479b2ea169a5e@orel/ [1]
Link: https://lore.kernel.org/linux-riscv/20240323-28943722feb57a41fb0ff488@orel/ [2]
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240814081126.956287-2-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add pinctrl node for CV1812H SoC.
Link: https://lore.kernel.org/r/IA1PR20MB49533DB3D0C1861938185015BB992@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Add pinctrl node and related pin configuration for CV1800B SoC.
Link: https://lore.kernel.org/r/IA1PR20MB49535E7F28242174CA318317BB992@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
We use Kconfig to select the kernel stack size, doubling the default
size if KASAN is enabled.
But that actually only works if KASAN is selected from the beginning,
meaning that if KASAN config is added later (for example using
menuconfig), CONFIG_THREAD_SIZE_ORDER won't be updated, keeping the
default size, which is not enough for KASAN as reported in [1].
So fix this by moving the logic to compute the right kernel stack into a
header.
Fixes: a7555f6b62e7 ("riscv: stack: Add config of thread stack size")
Reported-by: syzbot+ba9eac24453387a9d502@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000eb301906222aadc2@google.com/ [1]
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240917150328.59831-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pull x86 kvm updates from Paolo Bonzini:
"x86:
- KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or
deleted.
This does not traditionally have particularly noticeable overhead,
but Intel's TDX will require the guest to re-accept private pages
if they are dropped from the secure EPT, which is a non starter.
Actually, the only reason why this is not already being done is a
bug which was never fully investigated and caused VM instability
with assigned GeForce GPUs, so allow userspace to opt into the new
behavior.
- Advertise AVX10.1 to userspace (effectively prep work for the
"real" AVX10 functionality that is on the horizon)
- Rework common MSR handling code to suppress errors on userspace
accesses to unsupported-but-advertised MSRs
This will allow removing (almost?) all of KVM's exemptions for
userspace access to MSRs that shouldn't exist based on the vCPU
model (the actual cleanup is non-trivial future work)
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC)
splits the 64-bit value into the legacy ICR and ICR2 storage,
whereas Intel (APICv) stores the entire 64-bit value at the ICR
offset
- Fix a bug where KVM would fail to exit to userspace if one was
triggered by a fastpath exit handler
- Add fastpath handling of HLT VM-Exit to expedite re-entering the
guest when there's already a pending wake event at the time of the
exit
- Fix a WARN caused by RSM entering a nested guest from SMM with
invalid guest state, by forcing the vCPU out of guest mode prior to
signalling SHUTDOWN (the SHUTDOWN hits the VM altogether, not the
nested guest)
- Overhaul the "unprotect and retry" logic to more precisely identify
cases where retrying is actually helpful, and to harden all retry
paths against putting the guest into an infinite retry loop
- Add support for yielding, e.g. to honor NEED_RESCHED, when zapping
rmaps in the shadow MMU
- Refactor pieces of the shadow MMU related to aging SPTEs in
prepartion for adding multi generation LRU support in KVM
- Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is
enabled, i.e. when the CPU has already flushed the RSB
- Trace the per-CPU host save area as a VMCB pointer to improve
readability and cleanup the retrieval of the SEV-ES host save area
- Remove unnecessary accounting of temporary nested VMCB related
allocations
- Set FINAL/PAGE in the page fault error code for EPT violations if
and only if the GVA is valid. If the GVA is NOT valid, there is no
guest-side page table walk and so stuffing paging related metadata
is nonsensical
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit
instead of emulating posted interrupt delivery to L2
- Add a lockdep assertion to detect unsafe accesses of vmcs12
structures
- Harden eVMCS loading against an impossible NULL pointer deref
(really truly should be impossible)
- Minor SGX fix and a cleanup
- Misc cleanups
Generic:
- Register KVM's cpuhp and syscore callbacks when enabling
virtualization in hardware, as the sole purpose of said callbacks
is to disable and re-enable virtualization as needed
- Enable virtualization when KVM is loaded, not right before the
first VM is created
Together with the previous change, this simplifies a lot the logic
of the callbacks, because their very existence implies
virtualization is enabled
- Fix a bug that results in KVM prematurely exiting to userspace for
coalesced MMIO/PIO in many cases, clean up the related code, and
add a testcase
- Fix a bug in kvm_clear_guest() where it would trigger a buffer
overflow _if_ the gpa+len crosses a page boundary, which thankfully
is guaranteed to not happen in the current code base. Add WARNs in
more helpers that read/write guest memory to detect similar bugs
Selftests:
- Fix a goof that caused some Hyper-V tests to be skipped when run on
bare metal, i.e. NOT in a VM
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES
guest
- Explicitly include one-off assets in .gitignore. Past Sean was
completely wrong about not being able to detect missing .gitignore
entries
- Verify userspace single-stepping works when KVM happens to handle a
VM-Exit in its fastpath
- Misc cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
Documentation: KVM: fix warning in "make htmldocs"
s390: Enable KVM_S390_UCONTROL config in debug_defconfig
selftests: kvm: s390: Add VM run test case
KVM: SVM: let alternatives handle the cases when RSB filling is required
KVM: VMX: Set PFERR_GUEST_{FINAL,PAGE}_MASK if and only if the GVA is valid
KVM: x86/mmu: Use KVM_PAGES_PER_HPAGE() instead of an open coded equivalent
KVM: x86/mmu: Add KVM_RMAP_MANY to replace open coded '1' and '1ul' literals
KVM: x86/mmu: Fold mmu_spte_age() into kvm_rmap_age_gfn_range()
KVM: x86/mmu: Morph kvm_handle_gfn_range() into an aging specific helper
KVM: x86/mmu: Honor NEED_RESCHED when zapping rmaps and blocking is allowed
KVM: x86/mmu: Add a helper to walk and zap rmaps for a memslot
KVM: x86/mmu: Plumb a @can_yield parameter into __walk_slot_rmaps()
KVM: x86/mmu: Move walk_slot_rmaps() up near for_each_slot_rmap_range()
KVM: x86/mmu: WARN on MMIO cache hit when emulating write-protected gfn
KVM: x86/mmu: Detect if unprotect will do anything based on invalid_list
KVM: x86/mmu: Subsume kvm_mmu_unprotect_page() into the and_retry() version
KVM: x86: Rename reexecute_instruction()=>kvm_unprotect_and_retry_on_failure()
KVM: x86: Update retry protection fields when forcing retry on emulation failure
KVM: x86: Apply retry protection to "unprotect on failure" path
KVM: x86: Check EMULTYPE_WRITE_PF_TO_SP before unprotecting gfn
...
|
