| Age | Commit message (Collapse) | Author |
|---|
|
accesses"
Charlie Jenkins <charlie@rivosinc.com> says:
Adds support for detecting and reporting the speed of unaligned vector
accesses on RISC-V CPUs. Adds vec_misaligned_speed key to the hwprobe
adds Zicclsm to cpufeature and fixes the check for scalar unaligned
emulated all CPUs. The vec_misaligned_speed key keeps the same format
as the scalar unaligned access speed key.
This set does not emulate unaligned vector accesses on CPUs that do not
support them. Only reports if userspace can run them and speed of
unaligned vector accesses if supported.
* b4-shazam-merge:
RISC-V: hwprobe: Document unaligned vector perf key
RISC-V: Report vector unaligned access speed hwprobe
RISC-V: Detect unaligned vector accesses supported
RISC-V: Replace RISCV_MISALIGNED with RISCV_SCALAR_MISALIGNED
RISC-V: Scalar unaligned access emulated on hotplug CPUs
RISC-V: Check scalar unaligned access on all CPUs
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-0-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Detect if vector misaligned accesses are faster or slower than
equivalent vector byte accesses. This is useful for usermode to know
whether vector byte accesses or vector misaligned accesses have a better
bandwidth for operations like memcpy.
Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-5-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Run an unaligned vector access to test if the system supports
vector unaligned access. Add the result to a new key in hwprobe.
This is useful for usermode to know if vector misaligned accesses are
supported and if they are faster or slower than equivalent byte accesses.
Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-4-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Replace RISCV_MISALIGNED with RISCV_SCALAR_MISALIGNED to allow
for the addition of RISCV_VECTOR_MISALIGNED in a later patch.
Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-3-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The check_unaligned_access_emulated() function should have been called
during CPU hotplug to ensure that if all CPUs had emulated unaligned
accesses, the new CPU also does.
This patch adds the call to check_unaligned_access_emulated() in
the hotplug path.
Fixes: 55e0bf49a0d0 ("RISC-V: Probe misaligned access speed in parallel")
Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-2-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Originally, the check_unaligned_access_emulated_all_cpus function
only checked the boot hart. This fixes the function to check all
harts.
Fixes: 71c54b3d169d ("riscv: report misaligned accesses emulation to hwprobe")
Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-1-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Aurelien reported probe failures due to the csi node being enabled
without having a camera attached to it. A camera was in the initial
submissions, but was removed from the dts, as it had not actually been
present on the board, but was from an addon board used by the
developer of the relevant drivers. The non-camera pipeline nodes were
not disabled when this happened and the probe failures are problematic
for Debian. Disable them.
CC: stable@vger.kernel.org
Fixes: 28ecaaa5af192 ("riscv: dts: starfive: jh7110: Add camera subsystem nodes")
Closes: https://lore.kernel.org/all/Zw1-vcN4CoVkfLjU@aurel32.net/
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
According to the prototype formal BPF memory consistency model
discussed e.g. in [1] and following the ordering properties of
the C/in-kernel macro atomic_cmpxchg(), a BPF atomic operation
with the BPF_CMPXCHG modifier is fully ordered. However, the
current RISC-V JIT lowerings fail to meet such memory ordering
property. This is illustrated by the following litmus test:
BPF BPF__MP+success_cmpxchg+fence
{
0:r1=x; 0:r3=y; 0:r5=1;
1:r2=y; 1:r4=f; 1:r7=x;
}
P0 | P1 ;
*(u64 *)(r1 + 0) = 1 | r1 = *(u64 *)(r2 + 0) ;
r2 = cmpxchg_64 (r3 + 0, r4, r5) | r3 = atomic_fetch_add((u64 *)(r4 + 0), r5) ;
| r6 = *(u64 *)(r7 + 0) ;
exists (1:r1=1 /\ 1:r6=0)
whose "exists" clause is not satisfiable according to the BPF
memory model. Using the current RISC-V JIT lowerings, the test
can be mapped to the following RISC-V litmus test:
RISCV RISCV__MP+success_cmpxchg+fence
{
0:x1=x; 0:x3=y; 0:x5=1;
1:x2=y; 1:x4=f; 1:x7=x;
}
P0 | P1 ;
sd x5, 0(x1) | ld x1, 0(x2) ;
L00: | amoadd.d.aqrl x3, x5, 0(x4) ;
lr.d x2, 0(x3) | ld x6, 0(x7) ;
bne x2, x4, L01 | ;
sc.d x6, x5, 0(x3) | ;
bne x6, x4, L00 | ;
fence rw, rw | ;
L01: | ;
exists (1:x1=1 /\ 1:x6=0)
where the two stores in P0 can be reordered. Update the RISC-V
JIT lowerings/implementation of BPF_CMPXCHG to emit an SC with
RELEASE ("rl") annotation in order to meet the expected memory
ordering guarantees. The resulting RISC-V JIT lowerings of
BPF_CMPXCHG match the RISC-V lowerings of the C atomic_cmpxchg().
Other lowerings were fixed via 20a759df3bba ("riscv, bpf: make
some atomic operations fully ordered").
Fixes: dd642ccb45ec ("riscv, bpf: Implement more atomic operations for RV64")
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lpc.events/event/18/contributions/1949/attachments/1665/3441/bpfmemmodel.2024.09.19p.pdf [1]
Link: https://lore.kernel.org/bpf/20241017143628.2673894-1-parri.andrea@gmail.com
|
|
Enable gpio-dwapb driver which is used by TH1520-based boards like the
BeagleV Ahead and the Sipeed LicheePi 4A.
Signed-off-by: Drew Fustini <drew@pdp7.com>
Link: https://lore.kernel.org/r/20241014205315.1349391-1-drew@pdp7.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The VDSO implementation includes headers from outside of the
vdso/ namespace.
Introduce vdso/page.h to make sure that the generic library
uses only the allowed namespace.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Link: https://lore.kernel.org/all/20241014151340.1639555-3-vincenzo.frascino@arm.com
|
|
There are currently no nodes that use spi0 so remove the enabled
property for it in the beaglev ahead and lpi4a dts files. It can be
re-enabled in the future if any peripherals will use it. The definition
of spi0 remains in the th1520.dtsi file.
Suggested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|
|
The gpio-dwapb looks for clock named "bus" so add clock-names property
for the gpio controller nodes.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
[dfustini: add two more lines to the commit message]
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|
|
Add nodes for the 5 user controllable LEDs on the BeagleV Ahead board.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|
|
Add pinctrl settings for UART0 used as the default debug console on
both the Lichee Pi 4A and BeagleV Ahead boards.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|
|
Add names for the GPIO00-GPIO14 lines of the SO-DIMM module.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|
|
Adjust labels for the TH1520 GPIO controllers such that GPIOs can be
referenced by the names used by the documentation. Eg.
GPIO0_X -> <&gpio0 X Y>
GPIO1_X -> <&gpio1 X Y>
GPIO2_X -> <&gpio2 X Y>
GPIO3_X -> <&gpio3 X Y>
GPIO4_X -> <&gpio4 X Y>
AOGPIO_X -> <&aogpio X Y>
Remove labels for the parent GPIO devices that shouldn't need to be
referenced.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|
|
Add gpio-ranges properties to the TH1520 device tree, so user space can
change basic pinconf settings for GPIOs and are not allowed to use pads
already used by other functions.
Adjust number of GPIOs available for the different controllers.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|
|
Add nodes for pin controllers on the T-Head TH1520 RISC-V SoC.
Add the missing aonsys_clk for the always-on pin controller as there is
not yet an aon subsys clock controller driver.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
[dfustini: modify description as there is now an ap_subsys clk driver]
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|
|
Since the generic VDSO clock mode storage is used, this header file is
unused and can be removed.
This avoids including a non-VDSO header while building the VDSO,
which can lead to compilation errors.
Also drop the comment which is out of date and in the wrong place.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-arch_update_vsyscall-v1-5-7fe5a3ea4382@linutronix.de
|
|
Most architectures use pt_regs within ftrace_regs making a lot of the
accessor functions just calls to the pt_regs internally. Instead of
duplication this effort, use a HAVE_ARCH_FTRACE_REGS for architectures
that have their own ftrace_regs that is not based on pt_regs and will
define all the accessor functions, and for the architectures that just use
pt_regs, it will leave it undefined, and the default accessor functions
will be used.
Note, this will also make it easier to add new accessor functions to
ftrace_regs as it will mean having to touch less architectures.
Cc: <linux-arch@vger.kernel.org>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/20241010202114.2289f6fd@gandalf.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # powerpc
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
ftrace_regs was created to hold registers that store information to save
function parameters, return value and stack. Since it is a subset of
pt_regs, it should only be used by its accessor functions. But because
pt_regs can easily be taken from ftrace_regs (on most archs), it is
tempting to use it directly. But when running on other architectures, it
may fail to build or worse, build but crash the kernel!
Instead, make struct ftrace_regs an empty structure and have the
architectures define __arch_ftrace_regs and all the accessor functions
will typecast to it to get to the actual fields. This will help avoid
usage of ftrace_regs directly.
Link: https://lore.kernel.org/all/20241007171027.629bdafd@gandalf.local.home/
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/20241008230628.958778821@goodmis.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When CONFIG_CFI_CLANG is enabled, the number of prologue instructions
skipped by tailcall needs to include the kcfi instruction, otherwise the
TCC will be initialized every tailcall is called, which may result in
infinite tailcalls.
Fixes: e63985ecd226 ("bpf, riscv64/cfi: Support kCFI + BPF on riscv64")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20241008124544.171161-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Enable Renesas at25ql128a flash connected to QSPI0. Also disable
the node from rzfive-smarc-som as it is untested.
Tested the flash by flashing bootloaders:
flash_erase /dev/mtd0 0 0
flash_erase /dev/mtd1 0 0
mtd_debug write /dev/mtd0 0 ${BL2_FILE_SIZE} ${BL2_IMAGE}
mtd_debug write /dev/mtd1 512 ${FIP_FILE_SIZE} ${FIP_IMAGE}
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241004173235.74307-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Now that the [ms]envcfg CSR value is maintained per thread, not per
hart, riscv_user_isa_enable() only needs to be called once during boot,
to set the value for the init task. This also allows it to be marked as
__init.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240814081126.956287-4-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Some bits in the [ms]envcfg CSR, such as the CFI state and pointer
masking mode, need to be controlled on a per-thread basis. Support this
by keeping a copy of the CSR value in struct thread_struct and writing
it during context switches. It is safe to discard the old CSR value
during the context switch because the CSR is modified only by software,
so the CSR will remain in sync with the copy in thread_struct.
Use ALTERNATIVE directly instead of riscv_has_extension_unlikely() to
minimize branchiness in the context switching code.
Since thread_struct is copied during fork(), setting the value for the
init task sets the default value for all other threads.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240814081126.956287-3-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, we enable cbo.zero for usermode on each hart that supports
the Zicboz extension. This means that the [ms]envcfg CSR value may
differ between harts. Other features, such as pointer masking and CFI,
require setting [ms]envcfg bits on a per-thread basis. The combination
of these two adds quite some complexity and overhead to context
switching, as we would need to maintain two separate masks for the
per-hart and per-thread bits. Andrew Jones, who originally added Zicboz
support, writes[1][2]:
I've approached Zicboz the same way I would approach all
extensions, which is to be per-hart. I'm not currently aware of
a platform that is / will be composed of harts where some have
Zicboz and others don't, but there's nothing stopping a platform
like that from being built.
So, how about we add code that confirms Zicboz is on all harts.
If any hart does not have it, then we complain loudly and disable
it on all the other harts. If it was just a hardware description
bug, then it'll get fixed. If there's actually a platform which
doesn't have Zicboz on all harts, then, when the issue is reported,
we can decide to not support it, support it with defconfig, or
support it under a Kconfig guard which must be enabled by the user.
Let's follow his suggested solution and require the extension to be
available on all harts, so the envcfg CSR value does not need to change
when a thread migrates between harts. Since we are doing this for all
extensions with fields in envcfg, the CSR itself only needs to be saved/
restored when it is present on all harts.
This should not be a regression as no known hardware has asymmetric
Zicboz support, but if anyone reports seeing the warning, we will
re-evaluate our solution.
Link: https://lore.kernel.org/linux-riscv/20240322-168f191eeb8479b2ea169a5e@orel/ [1]
Link: https://lore.kernel.org/linux-riscv/20240323-28943722feb57a41fb0ff488@orel/ [2]
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240814081126.956287-2-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add pinctrl node for CV1812H SoC.
Link: https://lore.kernel.org/r/IA1PR20MB49533DB3D0C1861938185015BB992@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Add pinctrl node and related pin configuration for CV1800B SoC.
Link: https://lore.kernel.org/r/IA1PR20MB49535E7F28242174CA318317BB992@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
We use Kconfig to select the kernel stack size, doubling the default
size if KASAN is enabled.
But that actually only works if KASAN is selected from the beginning,
meaning that if KASAN config is added later (for example using
menuconfig), CONFIG_THREAD_SIZE_ORDER won't be updated, keeping the
default size, which is not enough for KASAN as reported in [1].
So fix this by moving the logic to compute the right kernel stack into a
header.
Fixes: a7555f6b62e7 ("riscv: stack: Add config of thread stack size")
Reported-by: syzbot+ba9eac24453387a9d502@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000eb301906222aadc2@google.com/ [1]
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240917150328.59831-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pull x86 kvm updates from Paolo Bonzini:
"x86:
- KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or
deleted.
This does not traditionally have particularly noticeable overhead,
but Intel's TDX will require the guest to re-accept private pages
if they are dropped from the secure EPT, which is a non starter.
Actually, the only reason why this is not already being done is a
bug which was never fully investigated and caused VM instability
with assigned GeForce GPUs, so allow userspace to opt into the new
behavior.
- Advertise AVX10.1 to userspace (effectively prep work for the
"real" AVX10 functionality that is on the horizon)
- Rework common MSR handling code to suppress errors on userspace
accesses to unsupported-but-advertised MSRs
This will allow removing (almost?) all of KVM's exemptions for
userspace access to MSRs that shouldn't exist based on the vCPU
model (the actual cleanup is non-trivial future work)
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC)
splits the 64-bit value into the legacy ICR and ICR2 storage,
whereas Intel (APICv) stores the entire 64-bit value at the ICR
offset
- Fix a bug where KVM would fail to exit to userspace if one was
triggered by a fastpath exit handler
- Add fastpath handling of HLT VM-Exit to expedite re-entering the
guest when there's already a pending wake event at the time of the
exit
- Fix a WARN caused by RSM entering a nested guest from SMM with
invalid guest state, by forcing the vCPU out of guest mode prior to
signalling SHUTDOWN (the SHUTDOWN hits the VM altogether, not the
nested guest)
- Overhaul the "unprotect and retry" logic to more precisely identify
cases where retrying is actually helpful, and to harden all retry
paths against putting the guest into an infinite retry loop
- Add support for yielding, e.g. to honor NEED_RESCHED, when zapping
rmaps in the shadow MMU
- Refactor pieces of the shadow MMU related to aging SPTEs in
prepartion for adding multi generation LRU support in KVM
- Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is
enabled, i.e. when the CPU has already flushed the RSB
- Trace the per-CPU host save area as a VMCB pointer to improve
readability and cleanup the retrieval of the SEV-ES host save area
- Remove unnecessary accounting of temporary nested VMCB related
allocations
- Set FINAL/PAGE in the page fault error code for EPT violations if
and only if the GVA is valid. If the GVA is NOT valid, there is no
guest-side page table walk and so stuffing paging related metadata
is nonsensical
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit
instead of emulating posted interrupt delivery to L2
- Add a lockdep assertion to detect unsafe accesses of vmcs12
structures
- Harden eVMCS loading against an impossible NULL pointer deref
(really truly should be impossible)
- Minor SGX fix and a cleanup
- Misc cleanups
Generic:
- Register KVM's cpuhp and syscore callbacks when enabling
virtualization in hardware, as the sole purpose of said callbacks
is to disable and re-enable virtualization as needed
- Enable virtualization when KVM is loaded, not right before the
first VM is created
Together with the previous change, this simplifies a lot the logic
of the callbacks, because their very existence implies
virtualization is enabled
- Fix a bug that results in KVM prematurely exiting to userspace for
coalesced MMIO/PIO in many cases, clean up the related code, and
add a testcase
- Fix a bug in kvm_clear_guest() where it would trigger a buffer
overflow _if_ the gpa+len crosses a page boundary, which thankfully
is guaranteed to not happen in the current code base. Add WARNs in
more helpers that read/write guest memory to detect similar bugs
Selftests:
- Fix a goof that caused some Hyper-V tests to be skipped when run on
bare metal, i.e. NOT in a VM
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES
guest
- Explicitly include one-off assets in .gitignore. Past Sean was
completely wrong about not being able to detect missing .gitignore
entries
- Verify userspace single-stepping works when KVM happens to handle a
VM-Exit in its fastpath
- Misc cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
Documentation: KVM: fix warning in "make htmldocs"
s390: Enable KVM_S390_UCONTROL config in debug_defconfig
selftests: kvm: s390: Add VM run test case
KVM: SVM: let alternatives handle the cases when RSB filling is required
KVM: VMX: Set PFERR_GUEST_{FINAL,PAGE}_MASK if and only if the GVA is valid
KVM: x86/mmu: Use KVM_PAGES_PER_HPAGE() instead of an open coded equivalent
KVM: x86/mmu: Add KVM_RMAP_MANY to replace open coded '1' and '1ul' literals
KVM: x86/mmu: Fold mmu_spte_age() into kvm_rmap_age_gfn_range()
KVM: x86/mmu: Morph kvm_handle_gfn_range() into an aging specific helper
KVM: x86/mmu: Honor NEED_RESCHED when zapping rmaps and blocking is allowed
KVM: x86/mmu: Add a helper to walk and zap rmaps for a memslot
KVM: x86/mmu: Plumb a @can_yield parameter into __walk_slot_rmaps()
KVM: x86/mmu: Move walk_slot_rmaps() up near for_each_slot_rmap_range()
KVM: x86/mmu: WARN on MMIO cache hit when emulating write-protected gfn
KVM: x86/mmu: Detect if unprotect will do anything based on invalid_list
KVM: x86/mmu: Subsume kvm_mmu_unprotect_page() into the and_retry() version
KVM: x86: Rename reexecute_instruction()=>kvm_unprotect_and_retry_on_failure()
KVM: x86: Update retry protection fields when forcing retry on emulation failure
KVM: x86: Apply retry protection to "unprotect on failure" path
KVM: x86: Check EMULTYPE_WRITE_PF_TO_SP before unprotecting gfn
...
|
|
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up
objtool warnings), teach objtool about 'noreturn' Rust symbols and
mimic '___ADDRESSABLE()' for 'module_{init,exit}'. With that, we
should be objtool-warning-free, so enable it to run for all Rust
object files.
- KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support.
- Support 'RUSTC_VERSION', including re-config and re-build on
change.
- Split helpers file into several files in a folder, to avoid
conflicts in it. Eventually those files will be moved to the right
places with the new build system. In addition, remove the need to
manually export the symbols defined there, reusing existing
machinery for that.
- Relax restriction on configurations with Rust + GCC plugins to just
the RANDSTRUCT plugin.
'kernel' crate:
- New 'list' module: doubly-linked linked list for use with reference
counted values, which is heavily used by the upcoming Rust Binder.
This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed
unique for the given ID), 'AtomicTracker' (tracks whether a
'ListArc' exists using an atomic), 'ListLinks' (the prev/next
pointers for an item in a linked list), 'List' (the linked list
itself), 'Iter' (an iterator over a 'List'), 'Cursor' (a cursor
into a 'List' that allows to remove elements), 'ListArcField' (a
field exclusively owned by a 'ListArc'), as well as support for
heterogeneous lists.
- New 'rbtree' module: red-black tree abstractions used by the
upcoming Rust Binder.
This includes 'RBTree' (the red-black tree itself), 'RBTreeNode' (a
node), 'RBTreeNodeReservation' (a memory reservation for a node),
'Iter' and 'IterMut' (immutable and mutable iterators), 'Cursor'
(bidirectional cursor that allows to remove elements), as well as
an entry API similar to the Rust standard library one.
- 'init' module: add 'write_[pin_]init' methods and the
'InPlaceWrite' trait. Add the 'assert_pinned!' macro.
- 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by
introducing an associated type in the trait.
- 'alloc' module: add 'drop_contents' method to 'BoxExt'.
- 'types' module: implement the 'ForeignOwnable' trait for
'Pin<Box<T>>' and improve the trait's documentation. In addition,
add the 'into_raw' method to the 'ARef' type.
- 'error' module: in preparation for the upcoming Rust support for
32-bit architectures, like arm, locally allow Clippy lint for
those.
Documentation:
- https://rust.docs.kernel.org has been announced, so link to it.
- Enable rustdoc's "jump to definition" feature, making its output a
bit closer to the experience in a cross-referencer.
- Debian Testing now also provides recent Rust releases (outside of
the freeze period), so add it to the list.
MAINTAINERS:
- Trevor is joining as reviewer of the "RUST" entry.
And a few other small bits"
* tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux: (54 commits)
kasan: rust: Add KASAN smoke test via UAF
kbuild: rust: Enable KASAN support
rust: kasan: Rust does not support KHWASAN
kbuild: rust: Define probing macros for rustc
kasan: simplify and clarify Makefile
rust: cfi: add support for CFI_CLANG with Rust
cfi: add CONFIG_CFI_ICALL_NORMALIZE_INTEGERS
rust: support for shadow call stack sanitizer
docs: rust: include other expressions in conditional compilation section
kbuild: rust: replace proc macros dependency on `core.o` with the version text
kbuild: rust: rebuild if the version text changes
kbuild: rust: re-run Kconfig if the version text changes
kbuild: rust: add `CONFIG_RUSTC_VERSION`
rust: avoid `box_uninit_write` feature
MAINTAINERS: add Trevor Gross as Rust reviewer
rust: rbtree: add `RBTree::entry`
rust: rbtree: add cursor
rust: rbtree: add mutable iterator
rust: rbtree: add iterator
rust: rbtree: add red-black tree implementation backed by the C version
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support using Zkr to seed KASLR
- Support IPI-triggered CPU backtracing
- Support for generic CPU vulnerabilities reporting to userspace
- A few cleanups for missing licenses
- The size limit on the XIP kernel has been removed
- Support for tracing userspace stacks
- Support for the Svvptc extension
- Various cleanups and fixes throughout the tree
* tag 'riscv-for-linus-6.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (47 commits)
crash: Fix riscv64 crash memory reserve dead loop
perf/riscv-sbi: Add platform specific firmware event handling
tools: Optimize ring buffer for riscv
tools: Add riscv barrier implementation
RISC-V: Don't have MAX_PHYSMEM_BITS exceed phys_addr_t
ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
riscv: Enable bitops instrumentation
riscv: Omit optimized string routines when using KASAN
ACPI: RISCV: Make acpi_numa_get_nid() to be static
riscv: Randomize lower bits of stack address
selftests: riscv: Allow mmap test to compile on 32-bit
riscv: Make riscv_isa_vendor_ext_andes array static
riscv: Use LIST_HEAD() to simplify code
riscv: defconfig: Disable RZ/Five peripheral support
RISC-V: Implement kgdb_roundup_cpus() to enable future NMI Roundup
riscv: avoid Imbalance in RAS
riscv: cacheinfo: Add back init_cache_level() function
riscv: Remove unused _TIF_WORK_MASK
drivers/perf: riscv: Remove redundant macro check
riscv: define ILLEGAL_POINTER_VALUE for 64bit
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C core:
- finally remove the I2C_COMPAT symbol after 15 years of deprecation
- lock client addresses during initialization to prevent race
conditions between different kinds of instantiation
- use scoped foreach OF child loops
- testunit cleanups and documentation improvements, as well as two
new tests, one for repeated start and one for triggering SMBusAlert
interrupts
I2C host drivers:
- DesignWare and Renesas I2C driver updates.
The first has has undergone through a series of cleanups that have
been sent to the mailing list a year ago for the first time and
finally get merged in this pull request. They are many, from typos
(e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline
functions to librarieas) and many others.
- all the DesignWare Kconfig options have been grouped under the
I2C_DESIGNWARE_CORE and this required some adaptation in many of
the kernel configuration files for different arm and mips boards
Cleanups:
- improve the exit path in the runtime resume function for the
Qualcomm Geni platform
- get rid of the unused "target_addr" parameter in the Intel LJCA
driver
- intialize the restart_flag in the MediaTek controller in one single
place
- constify a few global data structures in the virtio driver
- simplify the bus speed handling in the Renesas driver init function
making it more readable
- improved probe function of the Renesas R-Car driver
- switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of
SET_RUNTIME_PM_OPS()
- iMX/MXC driver cleanups
- use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic
and MPC drivers
Refactoring:
- Fix a potential out of boundary array access in the Nuvoton driver.
This is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The change
makes the driver more future proof and, at the same time, silences
code analyzers.
Improvements:
- several patches improving the runtime power management handling of
the Renesas I2C (riic) driver
- use a more descriptive adapter name in the Intel i801 driver to
show the presence of the IDF feature
- kill pending transactions when irq's can't complete their handling
in the Intel Denverton (ismt) driver, triggering a timeout
New Feature:
- support fast mode plus in the Renesas I2C (riic) driver
New support:
- Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
- new i2c-keba.c driver
- new driver for The Mule i2c multiplexer
Core I2C framework:
- move runtime PM functions in order to allow them to be accessed
during device add
Devicetree:
- nVidia and Qualcomm binding improvements
- get rid of redundant "multi-master" property in the aspeed binding
- convert i2c-sprd binding to YAML
AT24 updates:
- document a new model from giantec in DT bindings"
* tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: designware: Use pci_get_drvdata()
i2c: designware: Propagate firmware node
i2c: designware: Uninline i2c_dw_probe()
i2c: ljca: Remove unused "target_addr" parameter
i2c: keba: Add KEBA I2C controller support
i2c: i801: Use a different adapter-name for IDF adapters
i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
dt-bindings: i2c: i2c-sprd: convert to YAML
i2c: ismt: kill transaction in hardware on timeout
i2c: designware: Group all DesignWare drivers under a single option
net: txgbe: Fix I2C Kconfig dependencies
RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
i2c: imx: Convert comma to semicolon
i2c: jz4780: Use devm_clk_get_enabled() helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
|
|
The SBI v2.0 specification pointed to by the link below reserves the
event code 0xffff for platform specific firmware events. Update the driver
to be able to parse and program such events. The platform specific
firmware events must now be specified in the perf command as below:
perf stat -e rCxxx ...
where bits[63:62] = 0x3 of the event config indicate a platform specific
firmware event and xxx indicate the actual event code which is passed
as the event data.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Link: https://github.com/riscv-non-isa/riscv-sbi-doc/releases/download/v2.0/riscv-sbi.pdf
Link: https://lore.kernel.org/r/20240812051109.6496-1-mchitale@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
I recently ended up with a warning on some compilers along the lines of
CC kernel/resource.o
In file included from include/linux/ioport.h:16,
from kernel/resource.c:15:
kernel/resource.c: In function 'gfr_start':
include/linux/minmax.h:49:37: error: conversion from 'long long unsigned int' to 'resource_size_t' {aka 'unsigned int'} changes value from '17179869183' to '4294967295' [-Werror=overflow]
49 | ({ type ux = (x); type uy = (y); __cmp(op, ux, uy); })
| ^
include/linux/minmax.h:52:9: note: in expansion of macro '__cmp_once_unique'
52 | __cmp_once_unique(op, type, x, y, __UNIQUE_ID(x_), __UNIQUE_ID(y_))
| ^~~~~~~~~~~~~~~~~
include/linux/minmax.h:161:27: note: in expansion of macro '__cmp_once'
161 | #define min_t(type, x, y) __cmp_once(min, type, x, y)
| ^~~~~~~~~~
kernel/resource.c:1829:23: note: in expansion of macro 'min_t'
1829 | end = min_t(resource_size_t, base->end,
| ^~~~~
kernel/resource.c: In function 'gfr_continue':
include/linux/minmax.h:49:37: error: conversion from 'long long unsigned int' to 'resource_size_t' {aka 'unsigned int'} changes value from '17179869183' to '4294967295' [-Werror=overflow]
49 | ({ type ux = (x); type uy = (y); __cmp(op, ux, uy); })
| ^
include/linux/minmax.h:52:9: note: in expansion of macro '__cmp_once_unique'
52 | __cmp_once_unique(op, type, x, y, __UNIQUE_ID(x_), __UNIQUE_ID(y_))
| ^~~~~~~~~~~~~~~~~
include/linux/minmax.h:161:27: note: in expansion of macro '__cmp_once'
161 | #define min_t(type, x, y) __cmp_once(min, type, x, y)
| ^~~~~~~~~~
kernel/resource.c:1847:24: note: in expansion of macro 'min_t'
1847 | addr <= min_t(resource_size_t, base->end,
| ^~~~~
cc1: all warnings being treated as errors
which looks like a real problem: our phys_addr_t is only 32 bits now, so
having 34-bit masks is just going to result in overflows.
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240731162159.9235-2-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, only acpi_early_node_map[0] was initialized to NUMA_NO_NODE.
To ensure all the values were properly initialized, switch to initialize
all of them to NUMA_NO_NODE.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> (arm64 platform)
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240729035958.1957185-1-haibo1.xu@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RT enablement from Thomas Gleixner:
"Enable PREEMPT_RT on supported architectures:
After twenty years of development we finally reached the point to
enable PREEMPT_RT support in the mainline kernel.
All prerequisites are merged, so enable it on the supported
architectures ARM64, RISCV and X86(32/64-bit)"
* tag 'sched-rt-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
riscv: Allow to enable PREEMPT_RT.
arm64: Allow to enable PREEMPT_RT.
x86: Allow to enable PREEMPT_RT.
|
|
Samuel Holland <samuel.holland@sifive.com> says:
This series fixes two areas where uninstrumented assembly routines
caused gaps in KASAN coverage on RISC-V, which were caught by KUnit
tests. The KASAN KUnit test suite passes after applying this series.
This series fixes the following test failures:
# kasan_strings: EXPECTATION FAILED at mm/kasan/kasan_test.c:1520
KASAN failure expected in "kasan_int_result = strcmp(ptr, "2")", but none occurred
# kasan_strings: EXPECTATION FAILED at mm/kasan/kasan_test.c:1524
KASAN failure expected in "kasan_int_result = strlen(ptr)", but none occurred
not ok 60 kasan_strings
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1531
KASAN failure expected in "set_bit(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1533
KASAN failure expected in "clear_bit(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1535
KASAN failure expected in "clear_bit_unlock(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1536
KASAN failure expected in "__clear_bit_unlock(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1537
KASAN failure expected in "change_bit(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1543
KASAN failure expected in "test_and_set_bit(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1545
KASAN failure expected in "test_and_set_bit_lock(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1546
KASAN failure expected in "test_and_clear_bit(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1548
KASAN failure expected in "test_and_change_bit(nr, addr)", but none occurred
not ok 61 kasan_bitops_generic
Samuel Holland (2):
riscv: Omit optimized string routines when using KASAN
riscv: Enable bitops instrumentation
arch/riscv/include/asm/bitops.h | 43 ++++++++++++++++++---------------
arch/riscv/include/asm/string.h | 2 ++
arch/riscv/kernel/riscv_ksyms.c | 3 ---
arch/riscv/lib/Makefile | 2 ++
arch/riscv/lib/strcmp.S | 1 +
arch/riscv/lib/strlen.S | 1 +
arch/riscv/lib/strncmp.S | 1 +
arch/riscv/purgatory/Makefile | 2 ++
8 files changed, 32 insertions(+), 23 deletions(-)
* b4-shazam-merge:
riscv: Enable bitops instrumentation
riscv: Omit optimized string routines when using KASAN
Link: https://lore.kernel.org/r/20240801033725.28816-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Instead of implementing the bitops functions directly in assembly,
provide the arch_-prefixed versions and use the wrappers from
asm-generic to add instrumentation. This improves KASAN coverage and
fixes the kasan_bitops_generic() unit test.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240801033725.28816-3-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The optimized string routines are implemented in assembly, so they are
not instrumented for use with KASAN. Fall back to the C version of the
routines in order to improve KASAN coverage. This fixes the
kasan_strings() unit test.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240801033725.28816-2-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
acpi_numa_get_nid() is only called in acpi_numa.c for riscv,
no need to add it in head file, so make it static and remove
related functions in the asm/acpi.h.
Spotted by doing some cleanup for arm64 ACPI.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Haibo Xu <haibo1.xu@intel.com>
Link: https://lore.kernel.org/r/20240811031804.3347298-1-guohanjun@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Register KVM's cpuhp and syscore callbacks when enabling virtualization in
hardware, as the sole purpose of said callbacks is to disable and re-enable
virtualization as needed.
The primary motivation for this series is to simplify dealing with enabling
virtualization for Intel's TDX, which needs to enable virtualization
when kvm-intel.ko is loaded, i.e. long before the first VM is created.
That said, this is a nice cleanup on its own. By registering the callbacks
on-demand, the callbacks themselves don't need to check kvm_usage_count,
because their very existence implies a non-zero count.
Patch 1 (re)adds a dedicated lock for kvm_usage_count. This avoids a
lock ordering issue between cpus_read_lock() and kvm_lock. The lock
ordering issue still exist in very rare cases, and will be fixed for
good by switching vm_list to an (S)RCU-protected list.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Implement arch_align_stack() to randomize the lower bits
of the stack address.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/20240625030502.68988-1-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Since this array is only used in this file, it should be static.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407241530.ej5SVgX1-lkp@intel.com/
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240807-make_andes_static-v1-1-b64bf4c3d941@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD().
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240904013344.2026738-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
There is not much point in keeping support for RZ/Five peripherals
enabled, as the RZ/Five platform option (ARCH_R9A07G043) is gated behind
NONPORTABLE. Hence drop all config options that enable built-in or
modular support for peripherals found on RZ/Five SoCs.
Disable USB_XHCI_RCAR explicitly, as its value defaults to the value of
ARCH_RENESAS, which is still enabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/89ad70c7d6e8078208fecfd41dc03f6028531729.1722353710.git.geert+renesas@glider.be
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Until now, the generic weak kgdb_roundup_cpus() has been used for kgdb on
RISCV. A custom one allows to debug CPUs that are stuck with interrupts
disabled with NMI support in the future. And using an IPI is better than
the generic one since it avoids the potential situation described in the
generic kgdb_call_nmi_hook(). As Andrew pointed out, once there is NMI
support, we can easily extend this and the CPU backtrace support
to use NMIs.
After this patch, the kgdb test show that:
# echo g > /proc/sysrq-trigger
[2]kdb> btc
btc: cpu status: Currently on cpu 2
Available cpus: 0-1(-), 2, 3(-)
Stack traceback for pid 0
0xffffffff81c13a40 0 0 1 0 - 0xffffffff81c14510 swapper/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.10.0-g3120273055b6-dirty #51
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff80006c48>] dump_backtrace+0x28/0x30
[<ffffffff80fceb38>] show_stack+0x38/0x44
[<ffffffff80fe6a04>] dump_stack_lvl+0x58/0x7a
[<ffffffff80fe6a3e>] dump_stack+0x18/0x20
[<ffffffff801143fa>] kgdb_cpu_enter+0x682/0x6b2
[<ffffffff801144ca>] kgdb_nmicallback+0xa0/0xac
[<ffffffff8000a392>] handle_IPI+0x9c/0x120
[<ffffffff800a2baa>] handle_percpu_devid_irq+0xa4/0x1e4
[<ffffffff8009cca8>] generic_handle_domain_irq+0x28/0x36
[<ffffffff800a9e5c>] ipi_mux_process+0xe8/0x110
[<ffffffff806e1e30>] imsic_handle_irq+0xf8/0x13a
[<ffffffff8009cca8>] generic_handle_domain_irq+0x28/0x36
[<ffffffff806dff12>] riscv_intc_aia_irq+0x2e/0x40
[<ffffffff80fe6ab0>] handle_riscv_irq+0x54/0x86
[<ffffffff80ff2e4a>] call_on_irq_stack+0x32/0x40
Rebased on Ryo Takakura's "RISC-V: Enable IPI CPU Backtrace" patch.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240727063438.886155-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
It is really time.
riscv has all the required architecture related changes, that have been
identified over time, in order to enable PREEMPT_RT. With the recent
printk changes, the last known road block has been addressed.
Allow to enable PREEMPT_RT on riscv.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nam Cao <namcao@linutronix.de> # Visionfive 2
Link: https://lore.kernel.org/all/20240906111841.562402-4-bigeasy@linutronix.de
|
