| Age | Commit message (Collapse) | Author |
|---|
|
Explicitly zero out the feature word in kvm_cpu_caps if the word's
associated CPUID function is greater than the max leaf supported by the
CPU. For such unsupported functions, Intel CPUs return the output from
the last supported leaf, not all zeros.
Practically speaking, this is likely a benign bug, as KVM uses the raw
host CPUID to mask the kernel's computed capabilities, and the kernel does
perform max leaf checks when populating boot_cpu_data. The only way KVM's
goof could be problematic is if the kernel force-set a feature in a leaf
that is completely unsupported, _and_ the max supported leaf happened to
return a value with '1' the same bit position. Which is theoretically
possible, but extremely unlikely. And even if that did happen, it's
entirely possible that KVM would still provide the correct functionality;
the kernel did set the capability after all.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-22-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Do the compile-time sanity checks on reverse_cpuid in __feature_leaf() so
that higher level APIs don't need to "manually" perform the sanity checks.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-21-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Revert the chunk of commit 01b4f510b9f4 ("kvm: x86: ensure pv_cpuid.features
is initialized when enabling cap") that forced a PV features cache refresh
during KVM_CAP_ENFORCE_PV_FEATURE_CPUID, as whatever ioctl() ordering
issue it alleged to have fixed never existed upstream, and likely never
existed in any kernel.
At the time of the commit, there was a tangentially related ioctl()
ordering issue, as toggling KVM_X86_DISABLE_EXITS_HLT after KVM_SET_CPUID2
would have resulted in KVM potentially leaving KVM_FEATURE_PV_UNHALT set.
But (a) that bug affected the entire guest CPUID, not just the cache, (b)
commit 01b4f510b9f4 didn't address that bug, it only refreshed the cache
(with the bad CPUID), and (c) setting KVM_X86_DISABLE_EXITS_HLT after vCPU
creation is completely broken as KVM configures HLT-exiting only during
vCPU creation, which is why KVM_CAP_X86_DISABLE_EXITS is now disallowed if
vCPUs have been created.
Another tangentially related bug was KVM's failure to clear the cache when
handling KVM_SET_CPUID2, but again commit 01b4f510b9f4 did nothing to fix
that bug.
The most plausible explanation for the what commit 01b4f510b9f4 was trying
to fix is a bug that existed in Google's internal kernel that was the
source of commit 01b4f510b9f4. At the time, Google's internal kernel had
not yet picked up commit 0d3b2ba16ba68 ("KVM: X86: Go on updating other
CPUID leaves when leaf 1 is absent"), i.e. KVM would not initialize the
PV features cache if KVM_SET_CPUID2 was called without a CPUID.0x1 entry.
Of course, no sane real world VMM would omit CPUID.0x1, including the KVM
selftest added by commit ac4a4d6de22e ("selftests: kvm: test enforcement
of paravirtual cpuid features"). And the test didn't actually try to
verify multiple orderings, nor did the selftest enter the guest without
doing KVM_SET_CPUID2, so who knows what motivated the change.
Regardless of why commit 01b4f510b9f4 ("kvm: x86: ensure pv_cpuid.features
is initialized when enabling cap") was added, refreshing the cache during
KVM_CAP_ENFORCE_PV_FEATURE_CPUID isn't necessary.
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-20-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Clear KVM's PV feature cache prior when processing a new guest CPUID so
that KVM doesn't keep a stale cache entry if userspace does KVM_SET_CPUID2
multiple times, once with a PV features entry, and a second time without.
Fixes: 66570e966dd9 ("kvm: x86: only provide PV features if enabled in guest's CPUID")
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Reject KVM_CAP_X86_DISABLE_EXITS if userspace attempts to disable MWAIT or
HLT exits and KVM previously reported (via KVM_CHECK_EXTENSION) that
disabling the exit(s) is not allowed. E.g. because MWAIT isn't supported
or the CPU doesn't have an always-running APIC timer, or because KVM is
configured to mitigate cross-thread vulnerabilities.
Cc: Kechen Lu <kechenl@nvidia.com>
Fixes: 4d5422cea3b6 ("KVM: X86: Provide a capability to disable MWAIT intercepts")
Fixes: 6f0f2d5ef895 ("KVM: x86: Mitigate the cross-thread return address predictions bug")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Reject KVM_CAP_X86_DISABLE_EXITS if vCPUs have been created, as disabling
PAUSE/MWAIT/HLT exits after vCPUs have been created is broken and useless,
e.g. except for PAUSE on SVM, the relevant intercepts aren't updated after
vCPU creation. vCPUs may also end up with an inconsistent configuration
if exits are disabled between creation of multiple vCPUs.
Cc: Hou Wenlong <houwenlong.hwl@antgroup.com>
Link: https://lore.kernel.org/all/9227068821b275ac547eb2ede09ec65d2281fe07.1680179693.git.houwenlong.hwl@antgroup.com
Link: https://lore.kernel.org/all/20230121020738.2973-2-kechenl@nvidia.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop the manual initialization of maxphyaddr and reserved_gpa_bits during
vCPU creation now that kvm_arch_vcpu_create() unconditionally invokes
kvm_vcpu_after_set_cpuid(), which handles all such CPUID caching.
None of the helpers between the existing code in kvm_arch_vcpu_create()
and the call to kvm_vcpu_after_set_cpuid() consume maxphyaddr or
reserved_gpa_bits (though auditing vmx_vcpu_create() and svm_vcpu_create()
isn't exactly easy).
Link: https://lore.kernel.org/r/20241128013424.4096668-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop the manual kvm_pmu_refresh() from kvm_pmu_init() now that
kvm_arch_vcpu_create() performs the refresh via kvm_vcpu_after_set_cpuid().
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Let vendor code inline __kvm_is_valid_cr4() now x86.c's cr4_reserved_bits
no longer exists, as keeping cr4_reserved_bits local to x86.c was the only
reason for "hiding" the definition of __kvm_is_valid_cr4().
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop x86.c's local pre-computed cr4_reserved bits and instead fold KVM's
reserved bits into the guest's reserved bits. This fixes a bug where VMX's
set_cr4_guest_host_mask() fails to account for KVM-reserved bits when
deciding which bits can be passed through to the guest. In most cases,
letting the guest directly write reserved CR4 bits is ok, i.e. attempting
to set the bit(s) will still #GP, but not if a feature is available in
hardware but explicitly disabled by the host, e.g. if FSGSBASE support is
disabled via "nofsgsbase".
Note, the extra overhead of computing host reserved bits every time
userspace sets guest CPUID is negligible. The feature bits that are
queried are packed nicely into a handful of words, and so checking and
setting each reserved bit costs in the neighborhood of ~5 cycles, i.e. the
total cost will be in the noise even if the number of checked CR4 bits
doubles over the next few years. In other words, x86 will run out of CR4
bits long before the overhead becomes problematic.
Note #2, __cr4_reserved_bits() starts from CR4_RESERVED_BITS, which is
why the existing __kvm_cpu_cap_has() processing doesn't explicitly OR in
CR4_RESERVED_BITS (and why the new code doesn't do so either).
Fixes: 2ed41aa631fc ("KVM: VMX: Intercept guest reserved CR4 bits to inject #GP fault")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Explicitly perform runtime CPUID adjustments as part of the "after set
CPUID" flow to guard against bugs where KVM consumes stale vCPU/CPUID
state during kvm_update_cpuid_runtime(). E.g. see commit 4736d85f0d18
("KVM: x86: Use actual kvm_cpuid.base for clearing KVM_FEATURE_PV_UNHALT").
Whacking each mole individually is not sustainable or robust, e.g. while
the aforemention commit fixed KVM's PV features, the same issue lurks for
Xen and Hyper-V features, Xen and Hyper-V simply don't have any runtime
features (though spoiler alert, neither should KVM).
Updating runtime features in the "full" path will also simplify adding a
snapshot of the guest's capabilities, i.e. of caching the intersection of
guest CPUID and kvm_cpu_caps (modulo a few edge cases).
Link: https://lore.kernel.org/r/20241128013424.4096668-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
During vCPU creation, process KVM's default, empty CPUID as if userspace
set an empty CPUID to ensure consistent and correct behavior with respect
to guest CPUID. E.g. if userspace never sets guest CPUID, KVM will never
configure cr4_guest_rsvd_bits, and thus create divergent, incorrect, guest-
visible behavior due to letting the guest set any KVM-supported CR4 bits
despite the features not being allowed per guest CPUID.
Note! This changes KVM's ABI, as lack of full CPUID processing allowed
userspace to stuff garbage vCPU state, e.g. userspace could set CR4 to a
guest-unsupported value via KVM_SET_SREGS. But it's extremely unlikely
that this is a breaking change, as KVM already has many flows that require
userspace to set guest CPUID before loading vCPU state. E.g. multiple MSR
flows consult guest CPUID on host writes, and KVM_SET_SREGS itself already
relies on guest CPUID being up-to-date, as KVM's validity check on CR3
consumes CPUID.0x7.1 (for LAM) and CPUID.0x80000008 (for MAXPHYADDR).
Furthermore, the plan is to commit to enforcing guest CPUID for userspace
writes to MSRs, at which point bypassing sregs CPUID checks is even more
nonsensical.
Link: https://lore.kernel.org/r/20241128013424.4096668-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Define and undefine the F() and SF() macros precisely around
kvm_set_cpu_caps() to make it all but impossible to use the macros outside
of kvm_cpu_cap_{mask,init_kvm_defined}(). Currently, F() is a simple
passthrough, but SF() is actively dangerous as it checks that the scattered
feature is supported by the host kernel.
And usage outside of the aforementioned helpers will run afoul of future
changes to harden KVM's CPUID management.
Opportunistically switch to feature_bit() when stuffing LA57 based on raw
hardware support.
No functional change intended.
Link: https://lore.kernel.org/r/20241128013424.4096668-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When clearing CONSTANT_TSC during CPUID emulation due to a Hyper-V quirk,
use feature_bit() instead of SF() to ensure the bit is actually cleared.
SF() evaluates to zero if the _host_ doesn't support the feature. I.e.
KVM could keep the bit set if userspace advertised CONSTANT_TSC despite
it not being supported in hardware.
Note, translating from a scattered feature to a the hardware version is
done by __feature_translate(), not SF(). The sole purpose of SF() is to
check kernel support for the scattered feature, *before* translation.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Various fixes to Hyper-V tools in the kernel tree (Dexuan Cui, Olaf
Hering, Vitaly Kuznetsov)
- Fix a bug in the Hyper-V TSC page based sched_clock() (Naman Jain)
- Two bug fixes in the Hyper-V utility functions (Michael Kelley)
- Convert open-coded timeouts to secs_to_jiffies() in Hyper-V drivers
(Easwar Hariharan)
* tag 'hyperv-fixes-signed-20241217' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
tools/hv: reduce resource usage in hv_kvp_daemon
tools/hv: add a .gitignore file
tools/hv: reduce resouce usage in hv_get_dns_info helper
hv/hv_kvp_daemon: Pass NIC name to hv_get_dns_info as well
Drivers: hv: util: Avoid accessing a ringbuffer not initialized yet
Drivers: hv: util: Don't force error code to ENODEV in util_probe()
tools/hv: terminate fcopy daemon if read from uio fails
drivers: hv: Convert open-coded timeouts to secs_to_jiffies()
tools: hv: change permissions of NetworkManager configuration file
x86/hyperv: Fix hv tsc page based sched_clock for hibernation
tools: hv: Fix a complier warning in the fcopy uio daemon
|
|
The leaf names are not consistent. Give them all a CPUID_LEAF_ prefix
for consistency and vertical alignment.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com> # for ioatdma bits
Link: https://lore.kernel.org/all/20241213205040.7B0C3241%40davehans-spike.ostc.intel.com
|
|
The CPUID level dependency table will entirely zap X86_FEATURE_XSAVE
if the CPUID level is too low. This code is unreachable. Kill it.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Chang S. Bae <chang.seok.bae@intel.com>
Link: https://lore.kernel.org/all/20241213205038.6E71F9A4%40davehans-spike.ostc.intel.com
|
|
Move the XSAVE-related CPUID leaf definitions to common code. Then,
use the new definition to remove the last magic number from the CPUID
level dependency table.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/all/20241213205037.43C57CDE%40davehans-spike.ostc.intel.com
|
|
All the code that reads the CPUID frequency information leaf hard-codes
a magic number. Give it a symbolic name and use it.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/all/20241213205036.4397658F%40davehans-spike.ostc.intel.com
|
|
The TSC code has a bunch of hard-coded references to leaf 0x15. Change
them over to the symbolic name. Also zap the 'ART_CPUID_LEAF' definition.
It was a duplicate of 'CPUID_TSC_LEAF'.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241213205034.B79D6224%40davehans-spike.ostc.intel.com
|
|
Prepare to use the TSC CPUID leaf definition more widely by moving
it to the common header.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/all/20241213205033.68799E53%40davehans-spike.ostc.intel.com
|
|
The DCA leaf number is also hard-coded in the CPUID level dependency
table. Move its definition to common code and use it.
While at it, fix up the naming and types in the probe code. All
CPUID data is provided in 32-bit registers, not 'unsigned long'.
Also stop referring to "level_9". Move away from test_bit()
because the type is no longer an 'unsigned long'.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/all/20241213205032.476A30FE%40davehans-spike.ostc.intel.com
|
|
The CPUID leaf dependency checker will remove X86_FEATURE_MWAIT if
the CPUID level is below the required level (CPUID_MWAIT_LEAF).
Thus, if you check X86_FEATURE_MWAIT you do not need to also
check the CPUID level.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241213205030.9B42B458%40davehans-spike.ostc.intel.com
|
|
The leaf-to-feature dependency array uses hard-coded leaf numbers.
Use the new common header definition for the MWAIT leaf.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/all/20241213205029.5B055D6E%40davehans-spike.ostc.intel.com
|
|
Begin constructing a common place to keep all CPUID leaf definitions.
Move CPUID_MWAIT_LEAF to the CPUID header and include it where
needed.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/all/20241213205028.EE94D02A%40davehans-spike.ostc.intel.com
|
|
All the users of 'x86_cpu_desc' are gone. Zap it from the tree.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241213185133.AF0BF2BC%40davehans-spike.ostc.intel.com
|
|
The AMD erratum 1386 detection code uses and old style 'x86_cpu_desc'
table. Replace it with 'x86_cpu_id' so the old style can be removed.
I did not create a new helper macro here. The new table is certainly
more noisy than the old and it can be improved on. But I was hesitant
to create a new macro just for a single site that is only two ugly
lines in the end.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241213185132.07555E1D%40davehans-spike.ostc.intel.com
|
|
The 'x86_cpu_desc' and 'x86_cpu_id' structures are very similar.
Reduce duplicate infrastructure by moving the few users of
'x86_cpu_desc' to the much more common variant.
The existing X86_MATCH_VFM_STEPS() helper matches ranges of
steppings. Instead of introducing a single-stepping match function
which could get confusing when paired with the range, just use
the stepping min/max match helper and use min==max.
Note that this makes the table more vertically compact because
multiple entries like this:
INTEL_CPU_DESC(INTEL_SKYLAKE_X, 4, 0x00000000),
INTEL_CPU_DESC(INTEL_SKYLAKE_X, 5, 0x00000000),
INTEL_CPU_DESC(INTEL_SKYLAKE_X, 6, 0x00000000),
INTEL_CPU_DESC(INTEL_SKYLAKE_X, 7, 0x00000000),
can be consolidated down to a single stepping range.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241213185131.8B610039%40davehans-spike.ostc.intel.com
|
|
The x86_match_cpu() infrastructure can match CPU steppings. Since
there are only 16 possible steppings, the matching infrastructure goes
all out and stores the stepping match as a bitmap. That means it can
match any possible steppings in a single list entry. Fun.
But it exposes this bitmap to each of the X86_MATCH_*() helpers when
none of them really need a bitmap. It makes up for this by exporting a
helper (X86_STEPPINGS()) which converts a contiguous stepping range
into the bitmap which every single user leverages.
Instead of a bitmap, have the main helper for this sort of thing
(X86_MATCH_VFM_STEPS()) just take a stepping range. This ends up
actually being even more compact than before.
Leave the helper in place (renamed to __X86_STEPPINGS()) to make it
more clear what is going on instead of just having a random GENMASK()
in the middle of an already complicated macro.
One oddity that I hit was this macro:
X86_MATCH_VFM_STEPS(vfm, X86_STEPPING_MIN, max_stepping, issues)
It *could* have been converted over to take a min/max stepping value
for each entry. But that would have been a bit too verbose and would
prevent the one oddball in the list (INTEL_COMETLAKE_L stepping 0)
from sticking out.
Instead, just have it take a *maximum* stepping and imply that the match
is from 0=>max_stepping. This is functional for all the cases now and
also retains the nice property of having INTEL_COMETLAKE_L stepping 0
stick out like a sore thumb.
skx_cpuids[] is goofy. It uses the stepping match but encodes all
possible steppings. Just use a normal, non-stepping match helper.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241213185129.65527B2A%40davehans-spike.ostc.intel.com
|
|
The 'x86_cpu_id' and 'x86_cpu_desc' structures are very similar and
need to be consolidated. There is a microcode version matching
function for 'x86_cpu_desc' but not 'x86_cpu_id'.
Create one for 'x86_cpu_id'.
This essentially just leverages the x86_cpu_id->driver_data field
to replace the less generic x86_cpu_desc->x86_microcode_rev field.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241213185128.8F24EEFC%40davehans-spike.ostc.intel.com
|
|
The only difference between 5 and 6 is the new counters snapshotting
group, without the following counters snapshotting enabling patches,
it's impossible to utilize the feature in a PEBS record. It's safe to
share the same code path with format 5.
Add format 6, so the end user can at least utilize the legacy PEBS
features.
Fixes: a932aa0e868f ("perf/x86: Add Lunar Lake and Arrow Lake support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241216204505.748363-1-kan.liang@linux.intel.com
|
|
From the perspective of the uncore PMU, the Clearwater Forest is the
same as the previous Sierra Forest. The only difference is the event
list, which will be supported in the perf tool later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241211161146.235253-1-kan.liang@linux.intel.com
|
|
Commit 2190966fbc14 ("x86: Convert unreachable() to BUG()") missed
one.
And after commit 06e24745985c ("objtool: Remove
annotate_{,un}reachable()") the invalid use of unreachable()
(rightfully) triggers warnings:
vmlinux.o: warning: objtool: page_fault_oops() falls through to next function is_prefetch()
Fixes: 2190966fbc14 ("x86: Convert unreachable() to BUG()")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241216093215.GD12338@noisy.programming.kicks-ass.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Fix xen netfront crash (XSA-465) and avoid using the hypercall page
that doesn't do speculation mitigations (XSA-466)"
* tag 'xsa465+xsa466-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: remove hypercall page
x86/xen: use new hypercall functions instead of hypercall page
x86/xen: add central hypercall functions
x86/xen: don't do PV iret hypercall through hypercall page
x86/static-call: provide a way to do very early static-call updates
objtool/x86: allow syscall instruction
x86: make get_cpu_vendor() accessible from Xen code
xen/netfront: fix crash when removing device
|
|
The hypercall page is no longer needed. It can be removed, as from the
Xen perspective it is optional.
But, from Linux's perspective, it removes naked RET instructions that
escape the speculative protections that Call Depth Tracking and/or
Untrain Ret are trying to achieve.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
|
|
Call the Xen hypervisor via the new xen_hypercall_func static-call
instead of the hypercall page.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
|
|
Add generic hypercall functions usable for all normal (i.e. not iret)
hypercalls. Depending on the guest type and the processor vendor
different functions need to be used due to the to be used instruction
for entering the hypervisor:
- PV guests need to use syscall
- HVM/PVH guests on Intel need to use vmcall
- HVM/PVH guests on AMD and Hygon need to use vmmcall
As PVH guests need to issue hypercalls very early during boot, there
is a 4th hypercall function needed for HVM/PVH which can be used on
Intel and AMD processors. It will check the vendor type and then set
the Intel or AMD specific function to use via static_call().
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
|
|
Drop SVM's direct TLB flush when CR4.PGE is toggled and NPT is enabled, as
KVM already guarantees TLBs are flushed appropriately.
For the call from cr_trap(), kvm_post_set_cr4() requests TLB_FLUSH_GUEST
(which is a superset of TLB_FLUSH_CURRENT) when CR4.PGE is toggled,
regardless of whether or not KVM is using TDP.
The calls from nested_vmcb02_prepare_save() and nested_svm_vmexit() are
checking guest (L2) vs. host (L1) CR4, and so a flush is unnecessary as L2
is defined to use a different ASID (from L1's perspective).
Lastly, the call from svm_set_cr0() passes in the current CR4 value, i.e.
can't toggle PGE.
Link: https://lore.kernel.org/r/20241127235312.4048445-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Define sev_{,es_,snp_}guest() as "false" when SEV is disabled via Kconfig,
i.e. when CONFIG_KVM_AMD_SEV=n. Despite the helpers being __always_inline,
gcc-12 is somehow incapable of realizing that the return value is a
compile-time constant and generates sub-optimal code.
Opportunistically clump the paths together to reduce the amount of
ifdeffery.
No functional change intended.
Link: https://lore.kernel.org/r/20241127234659.4046347-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
On a first glance it isn't obvious why calling kvm_tdp_page_fault() in
kvm_mmu_do_page_fault() is special cased, as the general case of using
an indirect case would result in calling of kvm_tdp_page_fault()
anyway.
Add a comment to explain the reason.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20241108161416.28552-1-jgross@suse.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Pass the target vCPU to the hwapic_isr_update() vendor hook so that VMX
can defer the update until after nested VM-Exit if an EOI for L1's vAPIC
occurs while L2 is active.
Note, commit d39850f57d21 ("KVM: x86: Drop @vcpu parameter from
kvm_x86_ops.hwapic_isr_update()") removed the parameter with the
justification that doing so "allows for a decent amount of (future)
cleanup in the APIC code", but it's not at all clear what cleanup was
intended, or if it was ever realized.
No functional change intended.
Cc: stable@vger.kernel.org
Reviewed-by: Chao Gao <chao.gao@intel.com>
Tested-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20241128000010.4051275-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix confusion with implicitly-shifted MDCR_EL2 masks breaking
SPE/TRBE initialization
- Align nested page table walker with the intended memory attribute
combining rules of the architecture
- Prevent userspace from constraining the advertised ASID width,
avoiding horrors of guest TLBIs not matching the intended context
in hardware
- Don't leak references on LPIs when insertion into the translation
cache fails
RISC-V:
- Replace csr_write() with csr_set() for HVIEN PMU overflow bit
x86:
- Cache CPUID.0xD XSTATE offsets+sizes during module init
On Intel's Emerald Rapids CPUID costs hundreds of cycles and there
are a lot of leaves under 0xD. Getting rid of the CPUIDs during
nested VM-Enter and VM-Exit is planned for the next release, for
now just cache them: even on Skylake that is 40% faster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Cache CPUID.0xD XSTATE offsets+sizes during module init
RISC-V: KVM: Fix csr_write -> csr_set for HVIEN PMU overflow bit
KVM: arm64: vgic-its: Add error handling in vgic_its_cache_translation
KVM: arm64: Do not allow ID_AA64MMFR0_EL1.ASIDbits to be overridden
KVM: arm64: Fix S1/S2 combination when FWB==1 and S2 has Device memory type
arm64: Fix usage of new shifted MDCR_EL2 values
|
|
A segmented RMP table allows for improved locality of reference between
the memory protected by the RMP and the RMP entries themselves.
Add support to detect and initialize a segmented RMP table with multiple
segments as configured by the system BIOS. While the RMPREAD instruction
will be used to read an RMP entry in a segmented RMP, initialization and
debugging capabilities will require the mapping of the segments.
The RMP_CFG MSR indicates if segmented RMP support is enabled and, if
enabled, the amount of memory that an RMP segment covers. When segmented
RMP support is enabled, the RMP_BASE MSR points to the start of the RMP
bookkeeping area, which is 16K in size. The RMP Segment Table (RST) is
located immediately after the bookkeeping area and is 4K in size. The RST
contains up to 512 8-byte entries that identify the location of the RMP
segment and amount of memory mapped by the segment (which must be less
than or equal to the configured segment size). The physical address that
is covered by a segment is based on the segment size and the index of the
segment in the RST. The RMP entry for a physical address is based on the
offset within the segment.
For example, if the segment size is 64GB (0x1000000000 or 1 << 36), then
physical address 0x9000800000 is RST entry 9 (0x9000800000 >> 36) and
RST entry 9 covers physical memory 0x9000000000 to 0x9FFFFFFFFF.
The RMP entry index within the RMP segment is the physical address
AND-ed with the segment mask, 64GB - 1 (0xFFFFFFFFF), and then
right-shifted 12 bits or PHYS_PFN(0x9000800000 & 0xFFFFFFFFF), which
is 0x800.
CPUID 0x80000025_EBX[9:0] describes the number of RMP segments that can
be cached by the hardware. Additionally, if CPUID 0x80000025_EBX[10] is
set, then the number of actual RMP segments defined cannot exceed the
number of RMP segments that can be cached and can be used as a maximum
RST index.
[ bp: Unify printk hex format specifiers. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Link: https://lore.kernel.org/r/02afd0ffd097a19cb6e5fb1bb76eb110496c5b11.1734101742.git.thomas.lendacky@amd.com
|
|
In preparation for support of a segmented RMP table, treat the contiguous
RMP table as a segmented RMP table with a single segment covering all
of memory. By treating a contiguous RMP table as a single segment, much
of the code that initializes and accesses the RMP can be re-used.
Segmented RMP tables can have up to 512 segment entries. Each segment
will have metadata associated with it to identify the segment location,
the segment size, etc. The segment data and the physical address are used
to determine the index of the segment within the table and then the RMP
entry within the segment. For an actual segmented RMP table environment,
much of the segment information will come from a configuration MSR. For
the contiguous RMP, though, much of the information will be statically
defined.
[ bp: Touchups, explain array_index_nospec() usage. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Link: https://lore.kernel.org/r/8c40fbc9c5217f0d79b37cf861eff03ab0330bef.1733172653.git.thomas.lendacky@amd.com
|
|
In preparation for support of a segmented RMP table, map only the RMP
table entries. The RMP bookkeeping area is only ever accessed when
first enabling SNP and does not need to remain mapped. To accomplish
this, split the initialization of the RMP bookkeeping area and the
initialization of the RMP entry area. The RMP bookkeeping area will be
mapped only while it is being initialized.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Reviewed-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/22f179998d319834f49c13a8c01187fbf0fd308d.1733172653.git.thomas.lendacky@amd.com
|
|
To make patch review easier for the segmented RMP support, move the SNP
probe function out from in between the initialization-related routines.
No functional change.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Link: https://lore.kernel.org/r/6c2975bbf132d567dd12e1435be1d18c0bf9131c.1733172653.git.thomas.lendacky@amd.com
|
|
Limit usage of the non-architectural RMP format to Zen3/Zen4 processors.
The RMPREAD instruction, with architectural defined output, is available
and should be used for RMP access beyond Zen4.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Reviewed-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/5be0093e091778a151266ea853352f62f838eb99.1733172653.git.thomas.lendacky@amd.com
|
|
Struct fields are zero by default, so these lines of code have no
effect. Remove them to reduce the number of matches that are found when
grepping for cra_alignmask.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The RMPREAD instruction returns an architecture defined format of an
RMP table entry. This is the preferred method for examining RMP entries.
The instruction is advertised in CPUID 0x8000001f_EAX[21]. Use this
instruction when available.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Reviewed-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/72c734ac8b324bbc0c839b2c093a11af4a8881fa.1733172653.git.thomas.lendacky@amd.com
|
|
The RMPREAD instruction returns an architecture defined format of an RMP
entry. This is the preferred method for examining RMP entries.
In preparation for using the RMPREAD instruction, convert the existing code
that directly accesses the RMP to map the raw RMP information into the
architecture defined format.
RMPREAD output returns a status bit for the 2MB region status. If the input
page address is 2MB aligned and any other pages within the 2MB region are
assigned, then 2MB region status will be set to 1. Otherwise, the 2MB region
status will be set to 0.
For systems that do not support RMPREAD, calculating this value would require
looping over all of the RMP table entries within that range until one is found
with the assigned bit set. Since this bit is not defined in the current
format, and so not used today, do not incur the overhead associated with
calculating it.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Link: https://lore.kernel.org/r/da49d5af1eb7f9039f35f14a32ca091efb2dd818.1733172653.git.thomas.lendacky@amd.com
|
