| Age | Commit message (Collapse) | Author |
|---|
|
Now that the architecture-optimized Poly1305 kconfig symbols are defined
regardless of CRYPTO, there is no need for CRYPTO_LIB_POLY1305 to select
CRYPTO. So, remove that. This makes the indirection through the
CRYPTO_LIB_POLY1305_INTERNAL symbol unnecessary, so get rid of that and
just use CRYPTO_LIB_POLY1305 directly. Finally, make the fallback to
the generic implementation use a default value instead of a select; this
makes it consistent with how the arch-optimized code gets enabled and
also with how CRYPTO_LIB_BLAKE2S_GENERIC gets enabled.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that the architecture-optimized ChaCha kconfig symbols are defined
regardless of CRYPTO, there is no need for CRYPTO_LIB_CHACHA to select
CRYPTO. So, remove that. This makes the indirection through the
CRYPTO_LIB_CHACHA_INTERNAL symbol unnecessary, so get rid of that and
just use CRYPTO_LIB_CHACHA directly. Finally, make the fallback to the
generic implementation use a default value instead of a select; this
makes it consistent with how the arch-optimized code gets enabled and
also with how CRYPTO_LIB_BLAKE2S_GENERIC gets enabled.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the x86 BLAKE2s, ChaCha, and Poly1305
library functions into a new directory arch/x86/lib/crypto/ that does
not depend on CRYPTO. This mirrors the distinction between crypto/ and
lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
arch/x86/crypto/Kconfig is sourced only when CONFIG_X86=y, so there is
no need for the symbols defined inside it to depend on X86.
In the case of CRYPTO_TWOFISH_586 and CRYPTO_TWOFISH_X86_64, the
dependency was actually on '(X86 || UML_X86)', which suggests that these
two symbols were intended to be available under user-mode Linux as well.
Yet, again these symbols were defined only when CONFIG_X86=y, so that
was not the case. Just remove this redundant dependency.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Restructure MMIO mitigation to use select/update/apply functions to
create consistent vulnerability handling.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-4-david.kaplan@amd.com
|
|
Restructure TAA mitigation to use select/update/apply functions to
create consistent vulnerability handling.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-3-david.kaplan@amd.com
|
|
Restructure MDS mitigation selection to use select/update/apply
functions to create consistent vulnerability handling.
[ bp: rename and beef up comment over VERW mitigation selected var for
maximum clarity. ]
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-2-david.kaplan@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix 32-bit kernel boot crash if passed physical memory with more than
32 address bits
- Fix Xen PV crash
- Work around build bug in certain limited build environments
- Fix CTEST instruction decoding in insn_decoder_test
* tag 'x86-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn: Fix CTEST instruction decoding
x86/boot: Work around broken busybox 'truncate' tool
x86/mm: Fix _pgd_alloc() for Xen PV mode
x86/e820: Discard high memory that can't be addressed by 32-bit systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc perf events fixes from Ingo Molnar:
- Use POLLERR for events in error state, instead of the ambiguous
POLLHUP error value
- Fix non-sampling (counting) events on certain x86 platforms
* tag 'perf-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix non-sampling (counting) events on certain x86 platforms
perf/core: Change to POLLERR for pinned events with error
|
|
The s2idle MMIO quirk uses a scratch register in the FCH.
Adjust the code to clarify that.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20250422234830.2840784-5-superm1@kernel.org
|
|
<asm/amd/fch.h>
SB800_PIIX4_FCH_PM_ADDR is used to indicate the base address for the
FCH PM registers. Multiple drivers may need this base address, so
move related defines to a common header location and rename them
accordingly.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sanket Goswami <Sanket.Goswami@amd.com>
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: linux-i2c@vger.kernel.org
Link: https://lore.kernel.org/r/20250422234830.2840784-4-superm1@kernel.org
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Single fix for broken usage of 'multi-MIDR' infrastructure in PI
code, adding an open-coded erratum check for everyone's favorite
pile of sand: Cavium ThunderX
x86:
- Bugfixes from a planned posted interrupt rework
- Do not use kvm_rip_read() unconditionally to cater for guests with
inaccessible register state"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Do not use kvm_rip_read() unconditionally for KVM_PROFILING
KVM: x86: Do not use kvm_rip_read() unconditionally in KVM tracepoints
KVM: SVM: WARN if an invalid posted interrupt IRTE entry is added
iommu/amd: WARN if KVM attempts to set vCPU affinity without posted intrrupts
iommu/amd: Return an error if vCPU affinity is set for non-vCPU IRTE
KVM: x86: Take irqfds.lock when adding/deleting IRQ bypass producer
KVM: x86: Explicitly treat routing entry type changes as changes
KVM: x86: Reset IRTE to host control if *new* route isn't postable
KVM: SVM: Allocate IR data using atomic allocation
KVM: SVM: Don't update IRTEs if APICv/AVIC is disabled
KVM: arm64, x86: make kvm_arch_has_irq_bypass() inline
arm64: Rework checks for broken Cavium HW in the PI code
|
|
The current is_x86_event has to go through the hybrid_pmus list to find
the matched pmu, then check if it's a X86 PMU and a X86 event. It's not
necessary.
The X86 PMU has a unique type ID on a non-hybrid machine, and a unique
capability type. They are good enough to do the check.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424134718.311934-5-kan.liang@linux.intel.com
|
|
The auto counter reload group also requires a group flag in the leader.
The leader must be a X86 event.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424134718.311934-4-kan.liang@linux.intel.com
|
|
Merge urgent fixes for dependencies.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
counters-snapshotting
The counter backwards may be observed in the PMI handler when
counters-snapshotting some non-precise events in the freq mode.
For the non-precise events, it's possible the counters-snapshotting
records a positive value for an overflowed PEBS event. Then the HW
auto-reload mechanism reset the counter to 0 immediately. Because the
pebs_event_reset is cleared in the freq mode, which doesn't set the
PERF_X86_EVENT_AUTO_RELOAD.
In the PMI handler, 0 will be read rather than the positive value
recorded in the counters-snapshotting record.
The counters-snapshotting case has to be specially handled. Since the
event value has been updated when processing the counters-snapshotting
record, only needs to set the new period for the counter via
x86_pmu_set_period().
Fixes: e02e9b0374c3 ("perf/x86/intel: Support PEBS counters snapshotting")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424134718.311934-6-kan.liang@linux.intel.com
|
|
The PEBS counters snapshotting group also requires a group flag in the
leader. The leader must be a X86 event.
Fixes: e02e9b0374c3 ("perf/x86/intel: Support PEBS counters snapshotting")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424134718.311934-3-kan.liang@linux.intel.com
|
|
A warning in intel_pmu_lbr_counters_reorder() may be triggered by below
perf command.
perf record -e "{cpu-clock,cycles/call-graph="lbr"/}" -- sleep 1
It's because the group is mistakenly treated as a branch counter group.
The hw.flags of the leader are used to determine whether a group is a
branch counters group. However, the hw.flags is only available for a
hardware event. The field to store the flags is a union type. For a
software event, it's a hrtimer. The corresponding bit may be set if the
leader is a software event.
For a branch counter group and other groups that have a group flag
(e.g., topdown, PEBS counters snapshotting, and ACR), the leader must
be a X86 event. Check the X86 event before checking the flag.
The patch only fixes the issue for the branch counter group.
The following patch will fix the other groups.
There may be an alternative way to fix the issue by moving the hw.flags
out of the union type. It should work for now. But it's still possible
that the flags will be used by other types of events later. As long as
that type of event is used as a leader, a similar issue will be
triggered. So the alternative way is dropped.
Fixes: 33744916196b ("perf/x86/intel: Support branch counters logging")
Closes: https://lore.kernel.org/lkml/20250412091423.1839809-1-luogengkun@huaweicloud.com/
Reported-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250424134718.311934-2-kan.liang@linux.intel.com
|
|
insn_decoder_test found a problem with decoding APX CTEST instructions:
Found an x86 instruction decoder bug, please report this.
ffffffff810021df 62 54 94 05 85 ff ctestneq
objdump says 6 bytes, but insn_get_length() says 5
It happens because x86-opcode-map.txt doesn't specify arguments for the
instruction and the decoder doesn't expect to see ModRM byte.
Fixes: 690ca3a3067f ("x86/insn: Add support for APX EVEX instructions to the opcode map")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v6.10+
Link: https://lore.kernel.org/r/20250423065815.2003231-1-kirill.shutemov@linux.intel.com
|
|
The "kvm_run->kvm_valid_regs" and "kvm_run->kvm_dirty_regs" variables are
u64 type. We are only using the lowest 3 bits but we want to ensure that
the users are not passing invalid bits so that we can use the remaining
bits in the future.
However "sync_valid_fields" and kvm_sync_valid_fields() are u32 type so
the check only ensures that the lower 32 bits are clear. Fix this by
changing the types to u64.
Fixes: 74c1807f6c4f ("KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ec25aad1-113e-4c6e-8941-43d432251398@stanley.mountain
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Previously, commit ed129ec9057f ("KVM: x86: forcibly leave nested mode
on vCPU reset") addressed an issue where a triple fault occurring in
nested mode could lead to use-after-free scenarios. However, the commit
did not handle the analogous situation for System Management Mode (SMM).
This omission results in triggering a WARN when KVM forces a vCPU INIT
after SHUTDOWN interception while the vCPU is in SMM. This situation was
reprodused using Syzkaller by:
1) Creating a KVM VM and vCPU
2) Sending a KVM_SMI ioctl to explicitly enter SMM
3) Executing invalid instructions causing consecutive exceptions and
eventually a triple fault
The issue manifests as follows:
WARNING: CPU: 0 PID: 25506 at arch/x86/kvm/x86.c:12112
kvm_vcpu_reset+0x1d2/0x1530 arch/x86/kvm/x86.c:12112
Modules linked in:
CPU: 0 PID: 25506 Comm: syz-executor.0 Not tainted
6.1.130-syzkaller-00157-g164fe5dde9b6 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.12.0-1 04/01/2014
RIP: 0010:kvm_vcpu_reset+0x1d2/0x1530 arch/x86/kvm/x86.c:12112
Call Trace:
<TASK>
shutdown_interception+0x66/0xb0 arch/x86/kvm/svm/svm.c:2136
svm_invoke_exit_handler+0x110/0x530 arch/x86/kvm/svm/svm.c:3395
svm_handle_exit+0x424/0x920 arch/x86/kvm/svm/svm.c:3457
vcpu_enter_guest arch/x86/kvm/x86.c:10959 [inline]
vcpu_run+0x2c43/0x5a90 arch/x86/kvm/x86.c:11062
kvm_arch_vcpu_ioctl_run+0x50f/0x1cf0 arch/x86/kvm/x86.c:11283
kvm_vcpu_ioctl+0x570/0xf00 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4122
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Architecturally, INIT is blocked when the CPU is in SMM, hence KVM's WARN()
in kvm_vcpu_reset() to guard against KVM bugs, e.g. to detect improper
emulation of INIT. SHUTDOWN on SVM is a weird edge case where KVM needs to
do _something_ sane with the VMCB, since it's technically undefined, and
INIT is the least awful choice given KVM's ABI.
So, double down on stuffing INIT on SHUTDOWN, and force the vCPU out of
SMM to avoid any weirdness (and the WARN).
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: ed129ec9057f ("KVM: x86: forcibly leave nested mode on vCPU reset")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mikhail Lobanov <m.lobanov@rosa.ru>
Link: https://lore.kernel.org/r/20250414171207.155121-1-m.lobanov@rosa.ru
[sean: massage changelog, make it clear this isn't architectural behavior]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Perf doesn't work at perf stat for hardware events on certain x86 platforms:
$perf stat -- sleep 1
Performance counter stats for 'sleep 1':
16.44 msec task-clock # 0.016 CPUs utilized
2 context-switches # 121.691 /sec
0 cpu-migrations # 0.000 /sec
54 page-faults # 3.286 K/sec
<not supported> cycles
<not supported> instructions
<not supported> branches
<not supported> branch-misses
The reason is that the check in x86_pmu_hw_config() for sampling events is
unexpectedly applied to counting events as well.
It should only impact x86 platforms with limit_period used for non-PEBS
events. For Intel platforms, it should only impact some older platforms,
e.g., HSW, BDW and NHM.
Fixes: 88ec7eedbbd2 ("perf/x86: Fix low freqency setting issue")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250423064724.3716211-1-luogengkun@huaweicloud.com
|
|
* Single fix for broken usage of 'multi-MIDR' infrastructure in PI
code, adding an open-coded erratum check for Cavium ThunderX
* Bugfixes from a planned posted interrupt rework
* Do not use kvm_rip_read() unconditionally to cater for guests
with inaccessible register state.
|
|
The GNU coreutils version of truncate, which is the original, accepts a
% prefix for the -s size argument which means the file in question
should be padded to a multiple of the given size. This is currently used
to pad the setup block of bzImage to a multiple of 4k before appending
the decompressor.
busybox reimplements truncate but does not support this idiom, and
therefore fails the build since commit
9c54baab4401 ("x86/boot: Drop CRC-32 checksum and the build tool that generates it")
Since very little build code within the kernel depends on the 'truncate'
utility, work around this incompatibility by avoiding truncate altogether,
and relying on dd to perform the padding.
Fixes: 9c54baab4401 ("x86/boot: Drop CRC-32 checksum and the build tool that generates it")
Reported-by: <phasta@kernel.org>
Tested-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250424101917.1552527-2-ardb+git@google.com
|
|
This commits breaks SNP guests:
234cf67fc3bd ("x86/sev: Split off startup code from core code")
The SNP guest boots, but no longer has access to the VMPCK keys needed
to communicate with the ASP, which is used, for example, to obtain an
attestation report.
The secrets_pa value is defined as static in both startup.c and
core.c. It is set by a function in startup.c and so when used in
core.c its value will be 0.
Share it again and add the sev_ prefix to put it into the global
SEV symbols namespace.
[ mingo: Renamed to sev_secrets_pa ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Link: https://lore.kernel.org/r/cf878810-81ed-3017-52c6-ce6aa41b5f01@amd.com
|
|
Not all VMs allow access to RIP. Check guest_state_protected before
calling kvm_rip_read().
This avoids, for example, hitting WARN_ON_ONCE in vt_cache_reg() for
TDX VMs.
Fixes: 81bf912b2c15 ("KVM: TDX: Implement TDX vcpu enter/exit path")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20250415104821.247234-3-adrian.hunter@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Not all VMs allow access to RIP. Check guest_state_protected before
calling kvm_rip_read().
This avoids, for example, hitting WARN_ON_ONCE in vt_cache_reg() for
TDX VMs.
Fixes: 81bf912b2c15 ("KVM: TDX: Implement TDX vcpu enter/exit path")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20250415104821.247234-2-adrian.hunter@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that the AMD IOMMU doesn't signal success incorrectly, WARN if KVM
attempts to track an AMD IRTE entry without metadata.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Take irqfds.lock when adding/deleting an IRQ bypass producer to ensure
irqfd->producer isn't modified while kvm_irq_routing_update() is running.
The only lock held when a producer is added/removed is irqbypass's mutex.
Fixes: 872768800652 ("KVM: x86: select IRQ_BYPASS_MANAGER")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly treat type differences as GSI routing changes, as comparing MSI
data between two entries could get a false negative, e.g. if userspace
changed the type but left the type-specific data as-is.
Fixes: 515a0c79e796 ("kvm: irqfd: avoid update unmodified entries of the routing")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Restore an IRTE back to host control (remapped or posted MSI mode) if the
*new* GSI route prevents posting the IRQ directly to a vCPU, regardless of
the GSI routing type. Updating the IRTE if and only if the new GSI is an
MSI results in KVM leaving an IRTE posting to a vCPU.
The dangling IRTE can result in interrupts being incorrectly delivered to
the guest, and in the worst case scenario can result in use-after-free,
e.g. if the VM is torn down, but the underlying host IRQ isn't freed.
Fixes: efc644048ecd ("KVM: x86: Update IRTE for posted-interrupts")
Fixes: 411b44ba80ab ("svm: Implements update_pi_irte hook to setup posted interrupt")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Allocate SVM's interrupt remapping metadata using GFP_ATOMIC as
svm_ir_list_add() is called with IRQs are disabled and irqfs.lock held
when kvm_irq_routing_update() reacts to GSI routing changes.
Fixes: 411b44ba80ab ("svm: Implements update_pi_irte hook to setup posted interrupt")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Skip IRTE updates if AVIC is disabled/unsupported, as forcing the IRTE
into remapped mode (kvm_vcpu_apicv_active() will never be true) is
unnecessary and wasteful. The IOMMU driver is responsible for putting
IRTEs into remapped mode when an IRQ is allocated by a device, long before
that device is assigned to a VM. I.e. the kernel as a whole has major
issues if the IRTE isn't already in remapped mode.
Opportunsitically kvm_arch_has_irq_bypass() to query for APICv/AVIC, so
so that all checks in KVM x86 incorporate the same information.
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250401161804.842968-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_arch_has_irq_bypass() is a small function and even though it does
not appear in any *really* hot paths, it's also not entirely rare.
Make it inline---it also works out nicely in preparation for using it in
kvm-intel.ko and kvm-amd.ko, since the function is not currently exported.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Recently _pgd_alloc() was switched from using __get_free_pages() to
pagetable_alloc_noprof(), which might return a compound page in case
the allocation order is larger than 0.
On x86 this will be the case if CONFIG_MITIGATION_PAGE_TABLE_ISOLATION
is set, even if PTI has been disabled at runtime.
When running as a Xen PV guest (this will always disable PTI), using
a compound page for a PGD will result in VM_BUG_ON_PGFLAGS being
triggered when the Xen code tries to pin the PGD.
Fix the Xen issue together with the not needed 8k allocation for a
PGD with PTI disabled by replacing PGD_ALLOCATION_ORDER with an
inline helper returning the needed order for PGD allocations.
Fixes: a9b3c355c2e6 ("asm-generic: pgalloc: provide generic __pgd_{alloc,free}")
Reported-by: Petr Vaněk <arkamar@atlas.cz>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Petr Vaněk <arkamar@atlas.cz>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250422131717.25724-1-jgross%40suse.com
|
|
Use the Crypto API partial block handling.
Also remove the unnecessary SIMD fallback path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the Crypto API partial block handling.
Also remove the unnecessary SIMD fallback path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that all sha256_base users have been converted to use the API
partial block handling, remove the partial block helpers.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the Crypto API partial block handling.
Also remove the unnecessary SIMD fallback path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
objtool already struggles to identify jump tables correctly in non-PIC
code, where the idiom is something like
jmpq *table(,%idx,8)
and the table is a list of absolute addresses of jump targets.
When using -fPIC, both the table reference as well as the jump targets
are emitted in a RIP-relative manner, resulting in something like
leaq table(%rip), %tbl
movslq (%tbl,%idx,4), %offset
addq %offset, %tbl
jmpq *%tbl
and the table is a list of offsets of the jump targets relative to the
start of the entire table.
Considering that this sequence of instructions can be interleaved with
other instructions that have nothing to do with the jump table in
question, it is extremely difficult to infer the control flow by
deriving the jump targets from the indirect jump, the location of the
table and the relative offsets it contains.
So let's not bother and disable jump tables for code built with -fPIC
under arch/x86/boot/startup.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250422210510.600354-2-ardb+git@google.com
|
|
Use the Crypto API partial block handling.
Also remove the unnecessary SIMD fallback path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the Crypto API partial block handling.
Also remove the unnecessary SIMD fallback path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The #ifdefs only guard code that is also guarded by in_ia32_syscall(),
which already contains the same #ifdef itself.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20240910-x86-vdso-ifdef-v1-2-877c9df9b081@linutronix.de
|
|
Replace the open-coded ifdefs in C sources files with IS_ENABLED().
This makes the code easier to read and enables the compiler to typecheck
also the disabled parts, before optimizing them away.
To make this work, also remove the ifdefs from declarations of used
variables.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20240910-x86-vdso-ifdef-v1-1-877c9df9b081@linutronix.de
|
|
Now that all users have been moved into startup/ where PIC codegen is
used, RIP_REL_REF() is no longer needed. Remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250418141253.2601348-14-ardb+git@google.com
|
|
Now that the early SEV code is built with -fPIC, RIP_REL_REF() has no
effect and can be dropped.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250418141253.2601348-13-ardb+git@google.com
|
|
Move the SEV startup code into arch/x86/boot/startup/, where it will
reside along with other code that executes extremely early, and
therefore needs to be built in a special manner.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250418141253.2601348-12-ardb+git@google.com
|
|
Disentangle the SEV core code and the SEV code that is called during
early boot. The latter piece will be moved into startup/ in a subsequent
patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250418141253.2601348-11-ardb+git@google.com
|
|
GCC may ignore the __no_sanitize_address function attribute when
inlining, resulting in KASAN instrumentation in code tagged as
'noinstr'.
Move the SEV NMI handling code, which is noinstr, into a separate source
file so KASAN can be disabled on the whole file without losing coverage
of other SEV core code, once the startup code is split off from it too.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250418141253.2601348-10-ardb+git@google.com
|
|
upstream fixes
In particular we need this fix before applying subsequent changes:
d54d610243a4 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
