summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2025-01-17Merge branch kvm-arm64/nv-resx-fixes-6.14 into kvmarm-master/nextMarc Zyngier
* kvm-arm64/nv-resx-fixes-6.14: : . : Fixes for NV sysreg accessors. From the cover letter: : : "Joey recently reported that some rather basic tests were failing on : NV, and managed to track it down to critical register fields (such as : HCR_EL2.E2H) not having their expect value. : : Further investigation has outlined a couple of critical issues: : : - Evaluating HCR_EL2.E2H must always be done with a sanitising : accessor, no ifs, no buts. Given that KVM assumes a fixed value for : this bit, we cannot leave it to the guest to mess with. : : - Resetting the sysreg file must result in the RESx bits taking : effect. Otherwise, we may end-up making the wrong decision (see : above), and we definitely expose invalid values to the guest. Note : that because we compute the RESx masks very late in the VM setup, we : need to apply these masks at that particular point as well. : [...]" : . KVM: arm64: nv: Apply RESx settings to sysreg reset values KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors Signed-off-by: Marc Zyngier <maz@kernel.org> # Conflicts: # arch/arm64/kvm/nested.c
2025-01-17Merge branch kvm-arm64/coresight-6.14 into kvmarm-master/nextMarc Zyngier
* kvm-arm64/coresight-6.14: : . : Trace filtering update from James Clark. From the cover letter: : : "The guest filtering rules from the Perf session are now honored for both : nVHE and VHE modes. This is done by either writing to TRFCR_EL12 at the : start of the Perf session and doing nothing else further, or caching the : guest value and writing it at guest switch for nVHE. In pKVM, trace is : now be disabled for both protected and unprotected guests." : . KVM: arm64: Fix selftests after sysreg field name update coresight: Pass guest TRFCR value to KVM KVM: arm64: Support trace filtering for guests KVM: arm64: coresight: Give TRBE enabled state to KVM coresight: trbe: Remove redundant disable call arm64/sysreg/tools: Move TRFCR definitions to sysreg tools: arm64: Update sysreg.h header files Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-01-17Merge branch kvm-arm64/pkvm-memshare-declutter into kvmarm-master/nextMarc Zyngier
* kvm-arm64/pkvm-memshare-declutter: : . : pKVM memory transition simplifications, courtesy of Quentin Perret. : : From the cover letter: : "Since its early days, pKVM has formalized memory 'transitions' (shares : and donations) using 'struct pkvm_mem_transition' and bunch of helpers : to manipulate it. The intention was for all transitions to use this : machinery to ensure we're checking things consistently. However, as : development progressed, it became clear that the rigidity of this model : made it really difficult to use in some use-cases which ended-up : side-stepping it entirely. That is the case for the : hyp_{un}pin_shared_mem() and host_{un}share_guest() paths upstream which : use lower level helpers directly, as well as for several other pKVM : features that should land upstream in the future (ex: when a guest : relinquishes a page during ballooning, when annotating a page that is : being DMA'd to, ...). On top of this, the pkvm_mem_transition machinery : requires a lot of boilerplate which makes the code hard to read, but : also adds layers of indirection that no compilers seems to see through, : hence leading to suboptimal generated code. : : Given all the above, this series removes the pkvm_mem_transition : machinery from mem_protect.c, and converts all its users to use : __*_{check,set}_page_state_range() low-level helpers directly." : . KVM: arm64: Drop pkvm_mem_transition for host/hyp donations KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing KVM: arm64: Drop pkvm_mem_transition for FF-A KVM: arm64: Only apply PMCR_EL0.P to the guest range of counters KVM: arm64: nv: Reload PMU events upon MDCR_EL2.HPME change KVM: arm64: Use KVM_REQ_RELOAD_PMU to handle PMCR_EL0.E change KVM: arm64: Add unified helper for reprogramming counters by mask KVM: arm64: Always check the state from hyp_ack_unshare() KVM: arm64: Fix set_id_regs selftest for ASIDBITS becoming unwritable Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-01-17Merge branch kvm-arm64/nv-timers into kvmarm-master/nextMarc Zyngier
* kvm-arm64/nv-timers: : . : Nested Virt support for the EL2 timers. From the initial cover letter: : : "Here's another batch of NV-related patches, this time bringing in most : of the timer support for EL2 as well as nested guests. : : The code is pretty convoluted for a bunch of reasons: : : - FEAT_NV2 breaks the timer semantics by redirecting HW controls to : memory, meaning that a guest could setup a timer and never see it : firing until the next exit : : - We go try hard to reflect the timer state in memory, but that's not : great. : : - With FEAT_ECV, we can finally correctly emulate the virtual timer, : but this emulation is pretty costly : : - As a way to make things suck less, we handle timer reads as early as : possible, and only defer writes to the normal trap handling : : - Finally, some implementations are badly broken, and require some : hand-holding, irrespective of NV support. So we try and reuse the NV : infrastructure to make them usable. This could be further optimised, : but I'm running out of patience for this sort of HW. : : [...]" : . KVM: arm64: nv: Fix doc header layout for timers KVM: arm64: nv: Document EL2 timer API KVM: arm64: Work around x1e's CNTVOFF_EL2 bogosity KVM: arm64: nv: Sanitise CNTHCTL_EL2 KVM: arm64: nv: Propagate CNTHCTL_EL2.EL1NV{P,V}CT bits KVM: arm64: nv: Add trap routing for CNTHCTL_EL2.EL1{NVPCT,NVVCT,TVT,TVCT} KVM: arm64: Handle counter access early in non-HYP context KVM: arm64: nv: Accelerate EL0 counter accesses from hypervisor context KVM: arm64: nv: Accelerate EL0 timer read accesses when FEAT_ECV in use KVM: arm64: nv: Use FEAT_ECV to trap access to EL0 timers KVM: arm64: nv: Publish emulated timer interrupt state in the in-memory state KVM: arm64: nv: Sync nested timer state with FEAT_NV2 KVM: arm64: nv: Add handling of EL2-specific timer registers Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-01-17riscv: dts: spacemit: move aliases to board dtsYixun Lan
aliases info should belong to board dts, instead of putting it at SoC dtsi file. Fixes: d8fe64691955 ("riscv: dts: add initial SpacemiT K1 SoC device tree") Link: https://lore.kernel.org/all/6a8bb914-858e-479d-a7d9-09e0ff688160@app.fastmail.com Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17riscv: dts: spacemit: add pinctrl property to uart0 in BPI-F3Yixun Lan
Before pinctrl driver implemented, the uart0 controller reply on bootloader for setting correct pin mux and configurations. Now, let's add pinctrl property to uart0 of Bananapi-F3 board. Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17riscv: defconfig: enable SpacemiT SoCYangyu Chen
Enable SpacemiT SoC config in defconfig to allow the default upstream kernel booting on Banana Pi BPI-F3 board. Signed-off-by: Yangyu Chen <cyy@cyyself.name> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Jesse Taube <jesse@rivosinc.com> Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17riscv: dts: spacemit: add Banana Pi BPI-F3 board device treeYangyu Chen
Banana Pi BPI-F3 [1] is a industrial grade RISC-V development board, it design with SpacemiT K1 8 core RISC-V chip [2]. Currently only support booting into console with only uart enabled, other features will be added soon later. Link: https://docs.banana-pi.org/en/BPI-F3/BananaPi_BPI-F3 [1] Link: https://www.spacemit.com/en/spacemit-key-stone-2/ [2] Signed-off-by: Yangyu Chen <cyy@cyyself.name> Acked-by: Jesse Taube <jesse@rivosinc.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17riscv: dts: add initial SpacemiT K1 SoC device treeYangyu Chen
Banana Pi BPI-F3 motherboard is powered by SpacemiT K1[1]. Key features: - 4 cores per cluster, 2 clusters on chip - UART IP is Intel XScale UART Some key considerations: - ISA string is inferred from vendor documentation[2] - Cluster topology is inferred from datasheet[1] and L2 in vendor dts[3] - No coherent DMA on this board Inferred by taking vendor ethernet and MMC drivers to the mainline kernel. Without dma-noncoherent in soc node, the driver fails. - Add cache nodes K1 SoC has 128 sets of 32KiB L1 I/D Cache for each hart, and 512 sets of 512KiB L2 Cache for each cluster. Currently only support booting into console with only uart, other features will be added soon later. Link: https://docs.banana-pi.org/en/BPI-F3/SpacemiT_K1_datasheet [1] Link: https://developer.spacemit.com/#/documentation?token=BWbGwbx7liGW21kq9lucSA6Vnpb [2] Link: https://gitee.com/bianbu-linux/linux-6.1/blob/bl-v1.0.y/arch/riscv/boot/dts/spacemit/k1-x.dtsi [3] Signed-off-by: Yangyu Chen <cyy@cyyself.name> Acked-by: Jesse Taube <jesse@rivosinc.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17riscv: add SpacemiT SoC family Kconfig supportYangyu Chen
The first SoC in the SpacemiT series is K1, which contains 8 RISC-V cores with RISC-V Vector v1.0 support. Link: https://www.spacemit.com/en/spacemit-key-stone-2/ Signed-off-by: Yangyu Chen <cyy@cyyself.name> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc8). Conflicts: drivers/net/ethernet/realtek/r8169_main.c 1f691a1fc4be ("r8169: remove redundant hwmon support") 152d00a91396 ("r8169: simplify setting hwmon attribute visibility") https://lore.kernel.org/20250115122152.760b4e8d@canb.auug.org.au Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.c 152f4da05aee ("bnxt_en: add support for rx-copybreak ethtool command") f0aa6a37a3db ("eth: bnxt: always recalculate features after XDP clearing, fix null-deref") drivers/net/ethernet/intel/ice/ice_type.h 50327223a8bb ("ice: add lock to protect low latency interface") dc26548d729e ("ice: Fix quad registers read on E825") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16EDAC/cell: Remove powerpc Cell driverMichael Ellerman
This driver can no longer be built since support for IBM Cell Blades was removed, in particular PPC_CELL_COMMON. Remove the driver. [ bp: Remove EDAC_CELL from Cell's defconfig too. ] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20241218105523.416573-23-mpe@ellerman.id.au
2025-01-16Merge tag 'omap-for-v6.14/soc-signed' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/arm soc: omap: minor updates for v6.14 * tag 'omap-for-v6.14/soc-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap: ARM: omap1: Fix up the Retu IRQ on Nokia 770 ARM: omap2plus_defconfig: enable charger of TWL603X ARM: OMAP2+: Fix a typo Link: https://lore.kernel.org/r/7hikqqb41a.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16x86/asm: Make serialize() always_inlineJuergen Gross
In order to allow serialize() to be used from noinstr code, make it __always_inline. Fixes: 0ef8047b737d ("x86/static-call: provide a way to do very early static-call updates") Closes: https://lore.kernel.org/oe-kbuild-all/202412181756.aJvzih2K-lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20241218100918.22167-1-jgross@suse.com
2025-01-16Merge tag 'riscv-dt-for-v6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt ~RISC-V~ StarFive Devicetrees for v6.14 Not so much RISC-V, but rather StarFive, this time around as there are only two changes: the Milk-V Mars and Pine64 Star64 boards get their usb0 interfaces moved from peripheral to host mode. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function riscv: dts: starfive: jh7110-pine64-star64: enable usb0 host function Link: https://lore.kernel.org/r/20250113-kennel-outplayed-21a52a654c36@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'mvebu-dt64-6.14-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt64 for 6.14 (part 1) Fix errors reported by dtbs_check for sata related nodes Fix cp1 comphy link on Marvell CN913x platforms * tag 'mvebu-dt64-6.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: drop additional phy-names for sata arm64: dts: marvell: only enable complete sata nodes arm64: dts: marvell: cn9131-cf-solidwan: fix cp1 comphy links Link: https://lore.kernel.org/r/87frlnygej.fsf@BLaptop.bootlin.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'qcom-arm64-for-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm64 DeviceTree updates for v6.14 This adds support for the new Snapdragon 8 Elite platform with MTP and QRD boards, QCS615 platform with the Ride board, QCS8300 platform with its Ride board, IPQ5424 platform with the RDP466 board, MSM8917 platform with Xiaomi Redmi 5A, and the SAR2130P platform with the Snapdragon AR2 Gen1 Smart Viewer Development Kit. On X Elite the HP Omnibook X laptop and the Snapdragon Devkit are added. The 8cx Gen3-based Huawaei Matebook E Go and Microsoft Windows Dev Kit 2023 are introduced. IPQ9574 gains PCIe and TRNG descriptions, together with a few other smaller improvements. TRNG is also enabled on the IPQ5332 platform. On MSM8994, Huawei Nexus 6P gains power and volume keys support. USB interrupts are corrected. On QCM6490 the FairPhone 5 gains camera EEPROM and Rb3Gen2 development kit gains description of the onboard LEDs. On QRB4210 RB2 support for HDMI audio playback is added. SA8775P gains missing clock controllers, CPUs are tied to PSCI power domains, DisplayPort is introduced and enabled on the Ride board. On SDM670 the GPU components are described and enabled for Google Pixel 3a, together with camera clock controller and flash LED. Xiaomi Mi Pad 5 Pro, on SM8250, gets WiFi and Bluetooth enabled. "global" IRQ for PCIe RC controllers are described on SM8550 and SM8650, to allow for hotplug events. Coresight support is added for SM8450, SM8650, X 1 Elite, QCS615, and QCS8300. The X Elite platform gains QUP power domains and OPPs, another PCIe controller, another UART, and its SDHCI controllers. The ASUS Vivobook S 15 gets GPU and lid switch enabled. Microsoft Surface Laptop 7 gains audio configuration, SD card reader support, and USB retimers. The Lenovo Yoga Slim 7x gets its LID switch described. Dell XPS 13 gains retimers described. The Lenovo Thinkpad T14s has additional USB ports enabled, as well as sound and fingerprint sensor. USB U1/U2 entry is disabled across a variety of platforms, to improve USB stability. sleep clock frequencies are reviewed and corrected for a variety of platforms, so is also various remoteproc mmio address ranges. * tag 'qcom-arm64-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (240 commits) arm64: dts: qcom: x1e80100-romulus: Update firmware nodes arm64: dts: qcom: msm8916-samsung-serranove: Add display panel arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes arm64: dts: qcom: Remove unused and undocumented properties arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes arm64: dts: qcom: pmi8950: add LAB-IBB nodes arm64: dts: qcom: ipq5424: enable the download mode support arm64: dts: qcom: ipq5424: add scm node arm64: dts: qcom: sm8250: Fix interrupt types of camss interrupts arm64: dts: qcom: sdm845: Fix interrupt types of camss interrupts arm64: dts: qcom: sc8280xp: Fix interrupt type of camss interrupts arm64: dts: qcom: qcs8300-ride: Enable USB controllers arm64: dts: qcom: qcs8300: Add support for usb nodes arm64: dts: qcom: qcs8300: Add support for clock controllers arm64: dts: qcom: sm8450: Add coresight nodes arm64: dts: qcom: sa8775p: Fix the size of 'addr_space' regions arm64: dts: qcom: qcs615-ride: Enable UFS node arm64: dts: qcom: qcs615: add UFS node arm64: dts: qcom: ipq5424: Add USB controller and phy nodes ... Link: https://lore.kernel.org/r/20250111181025.394631-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'qcom-arm32-for-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm32 DeviceTree updates for v6.14 Describe the interconnect paths for PCIe EP controllers on SDX55 and SDX65. Disable USB U1/U2 entry to improve USB stability on the same. * tag 'qcom-arm32-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: sdx55: Disable USB U1/U2 entry ARM: dts: qcom: sdx65: Disable USB U1/U2 entry ARM: dts: qcom: sdx55: Add CPU PCIe EP interconnect path ARM: dts: qcom: sdx65: Add PCIe EP interconnect path Link: https://lore.kernel.org/r/20250111171126.369502-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'v6.14-rockchip-dts64-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards rk3576-evb1, H96 Max V58 TV Box (rk3588), BigTreeTech CB2 (SoM + baseboard) and Pi2 (SBC), Firefly ITX-3588J (Core-3588J SoM), Orange Pi 5 Max. A interesting case is the Radxa E52C using a soc called rk3582. This is rk3588-variant where some cpu cores are disabled during production and the bootloader needs to read the available cores from efuses and adapt the DT it hands over to the kernel. New supported peripherals are just the naneng combophy + the usb controllers using them on the rk3576 as well as the arm,smmu attached to the PCI controller on rk3588. And finally there are of course a number of board-specific enablements and refinements (MCU on Qnap-TS433, USB3 on NanoPi R6C/R6S and Orange Pi 5+ etc. * tag 'v6.14-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (31 commits) arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM dt-bindings: arm: rockchip: Add Firefly ITX-3588J board arm64: dts: rockchip: Add Orange Pi 5 Max board dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi arm64: dts: rockchip: add WLAN to rk3588-evb1 controller arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes arm64: dts: rockchip: enable hdmi out audio on wolfvision pf5 arm64: dts: rockchip: fix num-channels property of wolfvision pf5 mic arm64: dts: rockchip: Enable the USB 3.0 port on NanoPi R6C/R6S arm64: dts: rockchip: Add FRAM MB85RS128TY to rk3568-mecsbc arm64: dts: rockchip: Remove unused i2c2 node from rk3568-mecsbc arm64: dts: rockchip: Fix PCIe3 handling for Edgeble-6TOPS Modules arm64: dts: rockchip: Add Radxa E52C dt-bindings: arm: rockchip: Add Radxa E52C arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2 dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2 arm64: dts: rockchip: Enable USB 3.0 ports on orangepi-5-plus arm64: dts: rockchip: Add H96 Max V58 TV Box based on RK3588 SoC ... Link: https://lore.kernel.org/r/2193001.3Lj2Plt8kZ@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'ti-k3-dt-for-v6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.14 Generic Fixups/Cleanups: - Remove unused and undocumented "ti,(rx|tx)-fifo-depth" properties for ethernet phy - Clock description added to ICSS-G SoC Specific features and Fixes: - Duplicate GICR reg defines in am62x/am62ax - Mailbox nodes are enabled at board level bringing AM67/j722s/am62p to same behavior as other K3 SoCs. - Introduction of deep-sleep state defines for pinctrl header AM62Ax - Enable ti-sysc for wkup_uart0 AM64: - Switch ICSSG clock to core clock. J7200: - Disable SPI1 loopback default. J784s4: - Clock ID fix for McSPI instances - Use j7200-padconf compatibility for padconf to enable suspend-to-ram support. Board Specific: AM62 - phyboard - hdmi bridge regulator and using 16bit input for hdmi bridge, vcc-supply for i2c eeprom - SK - SoC wakeup using USB1, Add bootph property around cpsw mac syscon node, M4 mailbox node redefinition fixup. - BeaglePlay: Fix ethernet phy reset time AM64 - hummingboard-t: Convert PCIE/USB overlays to independent dts. j7200: - EVM: fix typo in overlay name. j721e: - EVM: overlay for pcie1 endpoint mode. j722s: - EVM: Add mcu_i2c0 support for expansion pins., Add USB0 DFU support, Enable PMIC - AM67a-beagley-ai: Add remote proc nodes j784s4: - AM69-SK/ j784s4-EVM - Mark PMIC regulators with bootph-all property to indicate ones that are needed through boot phases. - AM69-sk: PIC0 Endpoint mode overlay, USB Superspeed mode. * tag 'ti-k3-dt-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (31 commits) arm64: dts: ti: k3-am62a-wakeup: Configure ti-sysc for wkup_uart0 arm64: dts: ti: k3-j722s-evm: Enable PMIC arm64: dts: ti: k3-am69-sk: Add USB SuperSpeed support arm64: dts: ti: k3-am625-beagleplay: Fix DP83TD510E reset time arm64: dts: ti: k3-am642-hummingboard-t: Convert overlay to board dts arm64: dts: ti: k3-am69-sk: Add overlay for PCIE0 Endpoint Mode arm64: dts: ti: k3-am68-sk-base-board: Add overlay for PCIE1 Endpoint Mode arm64: dts: ti: k3-j721e-evm: Add overlay for PCIE1 Endpoint Mode arm64: dts: ti: Makefile: Fix typo "k3-j7200-evm-pcie1-ep.dtbo" arm64: dts: ti: k3-j7200: Add node to disable loopback connection arm64: dts: ti: k3-j784s4: Use ti,j7200-padconf compatible arm64: dts: ti: k3-am62p-j722s-common-main: Enable USB0 for DFU boot arm64: dts: ti: k3-am62a: Remove duplicate GICR reg arm64: dts: ti: k3-am62: Remove duplicate GICR reg arm64: dts: ti: k3-am67a-beagley-ai: Add remote processor nodes arm64: dts: ti: k3-am62p: Enable Mailbox nodes at the board level arm64: dts: ti: k3-am625-sk: Remove M4 mailbox node redefinition arm64: dts: ti: k3-j722s-evm: Enable support for mcu_i2c0 arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in cpsw_mac_syscon node arm64: dts: ti: Remove unused and undocumented "ti,(rx|tx)-fifo-depth" properties ... Link: https://lore.kernel.org/r/20250110210812.bdpypzvmg6s6sr5t@itinerary Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'tegra-for-6.14-arm64-dt' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt arm64: tegra: Device tree fixes for v6.14-rc1 These patches fix up an issue with the DMA support on one of the SPI controllers, as well as properly identify the SCE fabric and disable it to prevent accessing registers that may not be accessible to the CPU. Finally, the GIC's #address-cells property is set to 0 to fix a problem in the PCIe interrupt-map property. * tag 'tegra-for-6.14-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Fix Tegra234 PCIe interrupt-map arm64: tegra: Disable Tegra234 sce-fabric node arm64: tegra: Fix typo in Tegra234 dce-fabric compatible arm64: tegra: Fix DMA ID for SPI2 Link: https://lore.kernel.org/r/20250110185355.4143505-3-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'tegra-for-6.14-arm-dt' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt ARM: tegra: Device tree fixes for v6.14-rc1 This contains a fix that makes sure the power to the USB ports is maintained during boot. This helps with booting from USB storage. * tag 'tegra-for-6.14-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: nyan: Maintain power to USB ports on boot Link: https://lore.kernel.org/r/20250110185355.4143505-2-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'arm-soc/for-6.14/devicetree-arm64' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM64-based SoCs Device Tree updates for 6.14: - Dave adds the display pipeline DT nodes on BCM2712 (Raspberry Pi 5) - Rob removes some undocumented properties - Same ensures that the CFE stub area is reserved to allow secondary CPUs to be successfully brought up in Linux, also making sure that the address used in the spin table is also carved out. Finally he adds support for the Zyxel EX3510-B router using BCM4906 - Rosen converts the BCM4908 platforms to use the more flexible nvmem-layout representation * tag 'arm-soc/for-6.14/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: bcm4908: nvmem-layout conversion arm64: dts: broadcom: bcmbca: bcm4908: Add DT for Zyxel EX3510-B dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906 arm64: dts: broadcom: bcmbca: bcm4908: Protect cpu-release-addr arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area arm64: dts: broadcom: Remove unused and undocumented properties arm64: dts: broadcom: Add DT for D-step version of BCM2712 arm64: dts: broadcom: Add display pipeline support to BCM2712 arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT Link: https://lore.kernel.org/r/20250109224756.3632025-2-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'arm-soc/for-6.14/devicetree' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM-based SoCs Device Tree updates for 6.14, please pull the following: - Rob removes some unused and undocumented properties pertaining to the SPI flash controller on Broadcom boards - Linus adds a number of BCM6846 peripherals: HWRNG, watchdog, GPIO, MDIO, LED controller, DMA and then proceeds with adding support for the GEnexsis XG6846B PON router - Rosen sets the MAC address NVMEM reference on the Meraki MR26 platform * tag 'arm-soc/for-6.14/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: meraki-mr26: set mac address for gmac0 ARM: dts: broadcom: Add Genexis XG6846B DTS file dt-bindings: arm: bcmbca: Add Genexis XG6846B dt-bindings: vendor-prefixes: Add Genexis ARM: dts: bcm6846: Add ARM PL081 DMA block ARM: dts: bcm6846: Add LED controller ARM: dts: bcm6846: Add MDIO control block ARM: dts: bcm6846: Add GPIO blocks ARM: dts: bcm6846: Enable watchdog ARM: dts: bcm6846: Add iproc rng arm: dts: broadcom: Remove unused and undocumented properties Link: https://lore.kernel.org/r/20250109224756.3632025-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'at91-dt-6.14-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip AT91 device tree updates for v6.14 #2 This update includes: - device tree files for the SAMA7D65 SoC and its evaluation board * tag 'at91-dt-6.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: microchip: add support for sama7d65_curiosity board ARM: dts: microchip: add sama7d65 SoC DT Link: https://lore.kernel.org/r/20250109164317.1154613-1-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'sunxi-dt-for-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner Device Tree changes for 6.14 - Add support for DMA engine and audio codec on F1C100s and enable audio codec on Lichee Pi Nano - Add syscon and SRAM nodes for A100 - Enable CPU DVFS for Tanix TX1 - Explicitly configure TCON0 pixel clock parent according to display output used This includes one commit shared with the clock tree dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI which adds the macros for the TCON0 pixel clock parents. * tag 'sunxi-dt-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64: explicitly assign clock parent for TCON0 dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI arm64: dts: allwinner: h313: enable DVFS for Tanix TX1 arm64: dts: allwinner: a100: Add syscon nodes dt-bindings: sram: sunxi-sram: Add A100 compatible ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano ARM: dts: suniv: f1c100s: Add support for Audio Codec ARM: dts: suniv: f1c100s: Add support for DMA Link: https://lore.kernel.org/r/Z36h2FwUxro8rouO@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'mtk-dts32-for-v6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt mt7623: fix validation error of ir-receiver * tag 'mtk-dts32-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: ARM: dts: mediatek: mt7623: fix IR nodename Link: https://lore.kernel.org/r/ea93d0ea-a1a0-4d36-8880-4f05c85f0c1b@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'mtk-dts64-for-v6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt MediaTek ARM64 DeviceTree updates for v6.14 This adds a few cleanups, enhances support for upstreamed SoCs and machines, other than adding new ones. In particular, fixes and improvements: - MT8516 gets a few fixes for GICv2, Watchdog and I2C, and support for the Keypad controller; - MT8390 Genio 700 board gets basic audio support; - MT8365 gets an alias for its integrated ethernet controller; - MT8195 gets an important fix for system suspend: all of the machines based on this SoC and its IoT variant can now properly perform PM Suspend to RAM; - MT8188 gets support for its Mali GPU with DVFS and a fix for the OVL Hardware found in the Display Controller using the right compatible strings; - MT8186 Chromebooks can now suspend properly thanks to a fix moving the USB wakeups from XHCI to MTU3 (USB) controller; - MT8183 Chromebooks get a fix for their DMIC microphone and proper support for their second-source touchscreen; - MT7988 SoC and the BananaPi R4 board gets support for Pinctrl, eMMC/SD, Thermal, CPU DVFS, PCI-Express, and peripherals like the RT5190A PMIC, PCA9545 I2C mux, and others; - MT7986 BananaPi R3 board gets support for SATA power socket; And cleanups: - Dropped regulator-compatible property from MediaTek DTs; - Aligned thermal node names with bindings on MT8183 Kukui; - MT6397 PMIC get proper sub-node names, fixing dt validation; - The property enabling Wake-On-Lan feature changed in all of the boards and driver to match the actual meaning of it (mediatek,mac-wol now enables wol on mac instead of phy); - Compatibles for MediaTek PMIC Keypad are added to bindings and can now pass dts validation; ...and the newly added machines are: - MT8188 (Ciri) Lenovo Chromebook Duet - MT8186 (Starmie) ASUS Chromebook Enterprise CM30 - MT8186 (Chinchou) ASUS Chromebook CZ12 and CZ12 Flip * tag 'mtk-dts64-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (71 commits) arm64: dts: mediatek: mt8516: add keypad node arm64: dts: mediatek: add per-SoC compatibles for keypad nodes dt-bindings: mediatek,mt6779-keypad: add more compatibles arm64: dts: mediatek: mt8365-evk: Set ethernet alias dts: arm64: mediatek: mt8195: Remove MT8183 compatible for OVL dts: arm64: mediatek: mt8188: Update OVL compatible from MT8183 to MT8195 dt-bindings: display: mediatek: ovl: Modify rules for MT8195/MT8188 dt-bindings: display: mediatek: ovl: Add compatible strings for MT8188 MDP3 dt-bindings: arm: mediatek: Drop MT8192 Chromebook variants that never shipped arm64: dts: mediatek: mt8192: Drop Chromebook variants that never shipped arm64: dts: mediatek: mt7988a-bpi-r4: Add proc-supply for cpus arm64: dts: mediatek: mt7988a-bpi-r4: Add MediaTek MT6682A/RT5190A PMIC arm64: dts: mediatek: mt7988a-bpi-r4: Enable pcie arm64: dts: mediatek: mt7988a-bpi-r4: Enable pwm arm64: dts: mediatek: mt7988a-bpi-r4: Enable ssusb1 on bpi-r4 arm64: dts: mediatek: mt7988a-bpi-r4: Enable t-phy for ssusb1 arm64: dts: mediatek: mt7988a-bpi-r4: Add PCA9545 I2C Mux arm64: dts: mediatek: mt7988a-bpi-r4: Enable I2C controllers arm64: dts: mediatek: mt7988a-bpi-r4: Add default UART stdout arm64: dts: mediatek: mt7988a-bpi-r4: Enable serial0 debug uart ... Link: https://lore.kernel.org/r/20250108100826.32458-1-angelogioacchino.delregno@collabora.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'omap-for-v6.14/dt-signed' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt ARM: dts: ti/omap/dra7: minor updates for v6.14 * tag 'omap-for-v6.14/dt-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap: ARM: dts: ti/omap: omap3-gta04: use proper touchscreen properties ARM: dts: ti: am437x-l4: remove autoidle for UART ARM: dts: ti/omap: gta04: fix pm issues caused by spi module ARM: dts: dra7: Add bus_dma_limit for l4 cfg bus Link: https://lore.kernel.org/r/7hmsg2b42q.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'at91-dt-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip AT91 device tree updates for v6.14 This update includes: - power monitor support for the SAM9X75 Curiosity board (using the PAC1934 device) - fix the VDDSDMMC rail to 3.3V to avoid breaking USB (for SAMA5D27 WLSOM1 EK and SAMA5D29 Curiosity boards) - partial support for the SAMA7D65 SoC - cleanups * tag 'at91-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: microchip: sam9x7: Add address/size to spi-controller nodes ARM: dts: microchip: sam9x60: Add address/size to spi-controller nodes ARM: dts: microchip: sama5d27_wlsom1_ek: Add no-1-8-v property to sdmmc0 node ARM: dts: microchip: sama5d29_curiosity: Add no-1-8-v property to sdmmc0 node ARM: dts: at91: Add sama7d65 pinmux dt-bindings: atmel-sysreg: add sama7d65 RAM and PIT dt-bindings: ARM: at91: Document Microchip SAMA7D65 Curiosity ARM: dts: microchip: sam9x75_curiosity: Add power monitor support ARM: dts: microchip: sam9x7: Move i2c address/size to dtsi Link: https://lore.kernel.org/r/20250107081424.758980-2-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'renesas-dts-for-v6.14-tag2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.14 (take two) - Add pin control support for the RZ/G3E SoC and the RZ/G3E SMARC Carrier-II EVK development board, - Add Image Signal Processor helper block (FCPVX and VSPX) support for the R-Car V4H SoC, - Describe odd C-PHY wiring on the White Hawk CSI/DSI sub-board, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.14-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: white-hawk-csi-dsi: Define CSI-2 data line orders arm64: dts: renesas: r8a779g0: Add VSPX instances arm64: dts: renesas: r8a779g0: Add FCPVX instances arm64: dts: renesas: r9a09g047e57-smarc: Add SCIF pincontrol arm64: dts: renesas: r9a09g047: Add pincontrol node arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Replace RZG2L macros dt-bindings: pinctrl: renesas: Document RZ/G3E SoC dt-bindings: pinctrl: renesas: Add alpha-numerical port support for RZ/V2H Link: https://lore.kernel.org/r/cover.1736180859.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'amlogic-arm64-dt-for-v6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM64 DT changes for v6.13: - remove broadcom wifi compatible from GX reference boards * tag 'amlogic-arm64-dt-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: meson: remove broadcom wifi compatible from GX reference boards Link: https://lore.kernel.org/r/72d71d3f-99c3-4767-8c80-8fa7a865c846@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'amlogic-arm-dt-for-v6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM DT changes for v6.14: - remove size and address cells from USB nodes * tag 'amlogic-arm-dt-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: dts: amlogic: meson: remove size and address cells from USB nodes Link: https://lore.kernel.org/r/77c645b3-0cdf-49f4-84e9-11c74074b9a8@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'sti-dt-for-v6.14-round1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into soc/dt Add and enable MALI400 support for STiH410-b2260 * tag 'sti-dt-for-v6.14-round1' of https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: st: enable the MALI gpu on the stih410-b2260 ARM: dts: st: add node for the MALI gpu on stih410.dtsi dt-bindings: gpu: mali-utgard: Add st,stih410-mali compatible Link: https://lore.kernel.org/r/f44cb1f0-4d91-4e25-8b1f-3dd9a7bed62b@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'imx-dt64-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm64 device tree change for 6.14: - Add simple-framebuffer support for imx8mn-bsh-smm-s2/pro board (Dario Binacchi) - Add LVDS compatible string for imx8mm-phg board (Fabio Estevam) - Add P3T1085 temperature sensor support for imx93-9x9-qsb board (Frank Li) - Add support for i.MX8MP based aristainetos3 boards from ABB (Heiko Schocher) - Add PCA9452 system PMIC support for imx93-14x14-evk board (Joy Zou) - Support NXP LVDS to HDMI adapter cards for imx8mp-evk board with DT overlays (Liu Ying) - A couple of changes from Markus Niebel to enable Open Drain for MDIO on imx93-tqma9352 boards - A series from Peng Fan to enable wdog3 fsl,ext-reset-output support for NXP i.MX93 boards - A couple changes from Wei Fang to add NETC support for i.MX95 * tag 'imx-dt64-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: freescale: imx93-9x9-qsb: enable fsl,ext-reset-output for wdog3 arm64: dts: freescale: imx93-14x14-evk: enable fsl,ext-reset-output for wdog3 arm64: dts: freescale: imx93-11x11-evk: enable fsl,ext-reset-output for wdog3 arm64: dts: imx95-19x19-evk: add ENETC 0 support arm64: dts: imx95: add NETC related nodes arm64: dts: imx8mm-phg: Add LVDS compatible string arm64: dts: imx93: add pca9452 support arm64: dts: imx8mn-bsh-smm-s2/pro: add simple-framebuffer arm64: dts: imx93-tqma9352-mba93xxla: enable Open Drain for MDIO arm64: dts: imx93-tqma9352-mba93xxca: enable Open Drain for MDIO arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085 arm64: dts: imx8mp-evk: Add NXP LVDS to HDMI adapter cards arm64: dts: imx8mp-skov-revb-mi1010ait-1cp1: Set "media_disp2_pix" clock rate to 70MHz arm64: dts: imx8mp: add aristainetos3 board support arm64: dts: imx8mq-zii-ultra: remove #address-cells of eeprom@a4 arm64: dts: imx: Switch to simple-audio-card,hp-det-gpios Link: https://lore.kernel.org/r/20250105095139.714590-4-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'imx-dt-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX ARM device tree change for 6.14: - Clean up TQMa7x device trees (Alexander Stein) - Correct node name pattern for mdio-gpio devices (Fabio Estevam) - Update deprecated GPIO properties for Generic ASoC Sound Card device (Geert Uytterhoeven) - Set USB dr_mode property to OTG explicitly for imx6qdl-sabresd based boards (Hui Wang) - Update MAINTAINERS entry for DH electronics DHSOM boards (Marek Vasut) - A series from Stefan Kerkmann to add phy-3p0-supply for usb phys * tag 'imx-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx: Use the correct mdio pattern ARM: dts: imx6qdl-sabresd: add dr_mode to usbotg ARM: dts: imx6qdl-apalis: Change to "adi,force-bt656-4" ARM: dts: imx6sx: add phy-3p0-supply to usb phys ARM: dts: imx6sl: add phy-3p0-supply to usb phys ARM: dts: imx6qdl: add phy-3p0-supply to usb phys MAINTAINERS: Update entry for DH electronics DHSOM SoMs and boards ARM: dts: imx7[d]-mba7: add Ethernet PHY IRQ support ARM: dts: imx7-mba7: Remove duplicated power supply ARM: dts: imx7-mba7: Fix SD card vmmc-supply ARM: dts: imx7-mba7: Add 3.3V and 5.0V regulators ARM: dts: imx7-tqma7: add missing vs-supply for LM75A (rev. 01xxx) ARM: dts: imx7-tqma7: Remove superfluous status="okay" property ARM: dts: imx7-mba7: remove LVDS transmitter regulator ARM: dts: imx: Switch to {hp,mic}-det-gpios Link: https://lore.kernel.org/r/20250105095139.714590-3-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'socfpga_dts_updates_v6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt SoCFPGA DTS updates for v6.14 - Remove unused and undocumented property "snps,max-mtu" - Add gpio and spi node for Agilex5 - Add VGIC maintenance interrupt for Agilex - Use correct reset name of "stmmaceth-ocp" instead of "ahb" - Drop unused #address-cells/#size-cells in the cyclone5-mcvevk * tag 'socfpga_dts_updates_v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: altera: Remove unused and undocumented "snps,max-mtu" property arm64: dts: socfpga: agilex5: Add gpio0 node and spi dma handshake id arm64: dts: socfpga: agilex: Add VGIC maintenance interrupt arm: dts: socfpga: use reset-name "stmmaceth-ocp" instead of "ahb" ARM: dts: socfpga_cyclone5_mcvevk: Drop unused #address-cells/#size-cells Link: https://lore.kernel.org/r/20250103023012.1268627-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'hisi-arm64-dt-for-6.14' of ↵Arnd Bergmann
https://github.com/hisilicon/linux-hisi into soc/dt ARM64: DT: HiSilicon ARM64 DT updates for v6.14 - Remove "enable-dma" and "bus-id" properties from the spi node on hi6220 * tag 'hisi-arm64-dt-for-6.14' of https://github.com/hisilicon/linux-hisi: arm64: dts: hisilicon: Remove unused and undocumented "enable-dma" and "bus-id" properties Link: https://lore.kernel.org/r/67767DCA.8060902@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'dt-cleanup-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM DTS for v6.14 1. Marvell: Use un-deprecated hp-det-gpios (no ABI impact expected). 2. SoCFPGA: Drop spidev devices which are not properly described in DTS, but are using some other compatibles. This was part of wider tree effort to fix such incorrect hardware descriptions. Important: Dropping this device node will have user-visible impact: spidev device will not register. * tag 'dt-cleanup-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: ARM: dts: socfpga: remove non-existent DAC from CycloneV devkit ARM: dts: marvell: mmp2-olpc-xo-1-75: Switch to {hp,mic}-det-gpios Link: https://lore.kernel.org/r/20241231132847.135814-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'dt64-cleanup-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM64 DTS for v6.14 1. Spreadtrum: - Correct few issues pointed out by DT schema around properties and node names. - Move fuel-gauge from DTSI to DTS, because it belongs to the board. - Use undeprecated properties, like battery-detect-gpios, already supported by Linux. 2. Uniphier: Use un-deprecated hp-det-gpios (no ABI impact expected). * tag 'dt64-cleanup-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: arm64: dts: sprd: Fix battery-detect-gpios property arm64: dts: uniphier: Switch to hp-det-gpios arm64: dts: sprd: sc9863a: reorder clocks, clock-names per bindings arm64: dts: sprd: sc9863a: fix in-ports property arm64: dts: sprd: sc2731: move fuel-gauge monitored-battery to device DTS arm64: dts: sprd: sp9860g-1h10: fix factory-internal-resistance-micro-ohms property arm64: dts: sprd: sp9860g-1h10: fix constant-charge-voltage-max-microvolt property Link: https://lore.kernel.org/r/20241231132847.135814-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15sparc/PCI: Update reference to devm_of_pci_get_host_bridge_resources()Bjorn Helgaas
5bd51b35c7cb ("PCI: Rework of_pci_get_host_bridge_resources() to devm_of_pci_get_host_bridge_resources()") converted and renamed of_pci_get_host_bridge_resources(). Update the comment reference to match. Link: https://lore.kernel.org/r/20250113231557.441289-5-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Andreas Larsson <andreas@gaisler.com>
2025-01-15genirq: Remove IRQ_MOVE_PCNTXT and related codeThomas Gleixner
Now that x86 is converted over to use the IRQCHIP_MOVE_DEFERRED flags, remove IRQ*_MOVE_PCNTXT and related code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241210103335.626707225@linutronix.de
2025-01-15x86/apic: Convert to IRQCHIP_MOVE_DEFERREDThomas Gleixner
Instead of marking individual interrupts as safe to be migrated in arbitrary contexts, mark the interrupt chips, which require the interrupt to be moved in actual interrupt context, with the new IRQCHIP_MOVE_DEFERRED flag. This makes more sense because this is a per interrupt chip property and not restricted to individual interrupts. That flips the logic from the historical opt-out to a opt-in model. This is simpler to handle for other architectures, which default to unrestricted affinity setting. It also allows to cleanup the redundant core logic significantly. All interrupt chips, which belong to a top-level domain sitting directly on top of the x86 vector domain are marked accordingly, unless the related setup code marks the interrupts with IRQ_MOVE_PCNTXT, i.e. XEN. No functional change intended. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Acked-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/all/20241210103335.563277044@linutronix.de
2025-01-15Merge tag 'samsung-dt64-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM64 changes for v6.14 1. Exynos8895: Add UART nodes, PMU (performance) for the M2 cluster and I2C controllers in the camera block (HSI2C in CAM0-3). 2. Exynos990: Add Power Management Unit (Samsung block), PMU (performance) for M5 cluster and two clock controllers. 3. ExynosAutov920: Add watchdog and DMA controllers. 4. Google GS101: Minor fixes for phy and USB. Add USB Type-C. 5. Exynos850-e850-96 board: Drop gap in memory layout. 6. New SoC: Exynos9810. 7. New boards, all mobile phones: - Exynos9810: Samsung Galaxy S9 (SM-G960F) - Exynos990: Samsung Galaxy S20 FE (SM-G780F) Samsung Galaxy S20 5G (SM-G980F) * tag 'samsung-dt64-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (23 commits) arm64: dts: exynos8895: Add camera hsi2c nodes arm64: dts: exynos990: Add clock management unit nodes arm64: dts: exynos: gs101-oriole: add pd-disable and typec-power-opmode arm64: dts: exynos: gs101-oriole: enable Maxim max77759 TCPCi arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F) arm64: dts: exynos: Add Exynos9810 SoC support arm64: dts: exynos850-e850-96: Specify reserved secure memory explicitly arm64: dts: exynos990: Add a PMU node for the third cluster arm64: dts: exynosautov920: Add DMA nodes arm64: dts: exynos8895: Add a PMU node for the second cluster dt-bindings: clock: samsung: Add Exynos990 SoC CMU bindings arm64: dts: exynosautov920: add watchdog DT node arm64: dts: exynos: Add initial support for Samsung Galaxy S20 (x1slte) arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s) arm64: dts: exynos: Add initial support for Samsung Galaxy S20 Series boards (x1s-common) dt-bindings: arm: samsung: samsung-boards: Add bindings for SM-G981B and SM-G980F board arm64: dts: exynos: gs101: allow stable USB phy Vbus detection arm64: dts: exynos: gs101: phy region for exynos5-usbdrd is larger MAINTAINERS: add myself and Tudor as reviewers for Google Tensor SoC arm64: dts: exynos990: Add pmu and syscon-reboot nodes ... Link: https://lore.kernel.org/r/20241231131742.134329-4-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15Merge tag 'thead-dt-for-v6.14' of https://github.com/pdp7/linux into soc/dtArnd Bergmann
thead-dt-for-v6.14: T-HEAD Devicetrees for v6.14 Add mailbox node for the T-Head TH1520 RISC-V SoC. The mailbox bindings and driver were already merged in v6.13: b2cf36e4a2ac ("dt-bindings: mailbox: Add thead,th1520-mailbox bindings") 5d4d263e1c6b ("mailbox: Introduce support for T-head TH1520 Mailbox driver") Signed-off-by: Drew Fustini <drew@pdp7.com> * tag 'thead-dt-for-v6.14' of https://github.com/pdp7/linux: riscv: dts: thead: Add mailbox node
2025-01-15Merge tag 'samsung-dt-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM changes for v6.14 Few fixes and improvements for sound on Galaxy Tab3 (Exynos4212). * tag 'samsung-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: samsung: exynos4212-tab3: Drop interrupt from WM1811 codec ARM: dts: samsung: exynos4212-tab3: Add MCLK2 clock to WM1811 codec config ARM: dts: samsung: exynos4212-tab3: Fix headset mic, add jack detection Link: https://lore.kernel.org/r/20241231131742.134329-3-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15Merge tag 'loongarch-kvm-6.14' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD LoongArch KVM changes for v6.14 1. Clear LLBCTL if secondary mmu mapping changed. 2. Add hypercall service support for usermode VMM. This is a really small changeset, because the Chinese New Year (Spring Festival) is coming. Happy New Year!
2025-01-15KVM: x86/mmu: Return RET_PF* instead of 1 in kvm_mmu_page_fault()Yan Zhao
Return RET_PF* (excluding RET_PF_EMULATE/RET_PF_CONTINUE/RET_PF_INVALID) instead of 1 in kvm_mmu_page_fault(). The callers of kvm_mmu_page_fault() are KVM page fault handlers (i.e., npf_interception(), handle_ept_misconfig(), __vmx_handle_ept_violation(), kvm_handle_page_fault()). They either check if the return value is > 0 (as in npf_interception()) or pass it further to vcpu_run() to decide whether to break out of the kernel loop and return to the user when r <= 0. Therefore, returning any positive value is equivalent to returning 1. Warn if r == RET_PF_CONTINUE (which should not be a valid value) to ensure a positive return value. This is a preparation to allow TDX's EPT violation handler to check the RET_PF* value and retry internally for RET_PF_RETRY. No functional changes are intended. Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Message-ID: <20250113021138.18875-1-yan.y.zhao@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-01-15s390/futex: Fix FUTEX_OP_ANDN implementationHeiko Carstens
The futex operation FUTEX_OP_ANDN is supposed to implement *(int *)UADDR2 &= ~OPARG; The s390 implementation just implements an AND instead of ANDN. Add the missing bitwise not operation to oparg to fix this. This is broken since nearly 19 years, so it looks like user space is not making use of this operation. Fixes: 3363fbdd6fb4 ("[PATCH] s390: futex atomic operations") Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-01-15platform/x86: intel: punit_ipc: Remove unused functionDr. David Alan Gilbert
intel_punit_ipc_simple_command() was added in 2015 by commit fdca4f16f57d ("platform:x86: add Intel P-Unit mailbox IPC driver") but never used. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20241221234807.160473-1-linux@treblig.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-07-18 12:15:27 +0000