| Age | Commit message (Collapse) | Author |
|---|
|
Dynamic memory layout is used by KASLR and 5-level paging.
CONFIG_X86_5LEVEL is going to be removed, making 5-level paging support
unconditional which requires unconditional support of dynamic memory
layout.
Remove CONFIG_DYNAMIC_MEMORY_LAYOUT.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250516123306.3812286-2-kirill.shutemov@linux.intel.com
|
|
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Enable cpufreq on X1E80100 SoCs through the SCMI perf protocol node.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20241030130840.2890904-3-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the cpucp mailbox and sram nodes required by SCMI perf protocol
on X1E80100 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20241030130840.2890904-2-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Jens reported that the sanity checks added to the new ps883x USB retimer
driver breaks USB and display on the HP X14. Turns out the X14 only has
a retimer on one of the ports, but this initially went unnoticed due to
the missing sanity check (and error handling) in the retimer driver.
Drop the non-existing retimer from the devicetree to enable the second
USB port and the display subsystem.
Note that this also matches the ACPI tables.
Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14")
Cc: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Tested-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250328084154.16759-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On Lenovo ThinkPad T14s, the headset is connected via a HiFi mux to
support CTIA and OMTP headsets. This switch is used to minimise pop and
click during headset type switching.
Enable the mux controls required to power this switch along with wiring up
gpio that control the headset switching.
Without this, headset audio will be very noisy and might see headset
detection errors.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250327100633.11530-7-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable PCIe5 and the SDX62 modem present on some T14s.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250327081427.19693-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-43-jirislaby@kernel.org
|
|
irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> # for 8xx
Link: https://lore.kernel.org/all/20250319092951.37667-42-jirislaby@kernel.org
|
|
All irq_domain_add_*() functions are going away. PowerPC is the only
user of irq_domain_add_nomap() and there is no irq_domain_create_nomap()
complement.
Therefore, to align with the rest of the kernel, rename
irq_domain_add_nomap() to irq_domain_create_nomap() and accept a
fwnode_handle instead of a device_node.
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-40-jirislaby@kernel.org
|
|
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-34-jirislaby@kernel.org
|
|
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # For 8xx
Link: https://lore.kernel.org/all/20250319092951.37667-33-jirislaby@kernel.org
|
|
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-29-jirislaby@kernel.org
|
|
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-26-jirislaby@kernel.org
|
|
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-15-jirislaby@kernel.org
|
|
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-14-jirislaby@kernel.org
|
|
of_node_to_fwnode() is irqdomain's reimplementation of the "officially"
defined of_fwnode_handle(). The former is in the process of being
removed, so use the latter instead.
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-11-jirislaby@kernel.org
|
|
of_node_to_fwnode() is irqdomain's reimplementation of the "officially"
defined of_fwnode_handle(). The former is in the process of being
removed, so use the latter instead.
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-9-jirislaby@kernel.org
|
|
The perf_sample_data_init() has already set the period of sample, so no
need to do it again.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250506094907.2724-1-changbin.du@huawei.com
|
|
BSS might be uninitialized when entering the startup code, so forbid the
use by the startup code of any variables that live after __bss_start in
the linker map.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250508114328.2460610-8-ardb+git@google.com
[will: Drop export of 'memstart_offset_seed', as this has been removed]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Accessing BSS will no longer be permitted from the startup code in
arch/arm64/kernel/pi, as some of it executes before BSS is cleared.
Clearing BSS earlier would involve managing cache coherency explicitly
in software, which is a hassle we prefer to avoid.
So move some variables that are assigned by the startup code out of BSS
and into .data.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250508114328.2460610-7-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
init_pgdir[] is only referenced from the startup code, but lives after
BSS in the linker map. Before tightening the rules about accessing BSS
from startup code, move init_pgdir[] into the __pi_ namespace, so it
does not need to be exported explicitly.
For symmetry, do the same with init_idmap_pgdir[], although it lives
before BSS.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250508114328.2460610-6-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The values stored in __boot_cpu_mode were changed without updating the
comment. Rectify that.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20250513124525.677736-1-ben.horgan@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
pmd_val(pmd) is redundant because a positive pmd_present(pmd) ensures
a positive pmd_val(pmd) according to their definitions like below.
#define pmd_val(x) ((x).pmd)
#define pmd_present(pmd) pte_present(pmd_pte(pmd))
#define pte_present(pte) (pte_valid(pte) || pte_present_invalid(pte))
#define pte_valid(pte) (!!(pte_val(pte) & PTE_VALID))
#define pte_present_invalid(pte) \
((pte_val(pte) & (PTE_VALID | PTE_PRESENT_INVALID)) == PTE_PRESENT_INVALID)
pte_present() can't be positive unless either of the flag PTE_VALID or
PTE_PRESENT_INVALID is set. In this case, pmd_val(pmd) should be positive
either.
So lets drop the redundant check pmd_val(pmd) and no functional changes
intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250508085251.204282-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
mov_q cannot really move PIE_E[0|1] macros into a general purpose register
as expected if those macro constants contain some 128 bit layout elements,
that are required for D128 page tables. The primary issue is that for D128,
PIE_E[0|1] are defined in terms of 128-bit types with shifting and masking,
which the assembler can't accommodate.
Instead pre-calculate these PIRE0_EL1/PIR_EL1 constants into asm-offsets.h
based PIE_E0_ASM/PIE_E1_ASM which can then be used in arch/arm64/mm/proc.S.
While here also drop PTE_MAYBE_NG/PTE_MAYBE_SHARED assembly overrides which
are not required any longer, as the compiler toolchains are smart enough to
compute both the PIE_[E0|E1]_ASM constants in all scenarios.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250429050511.1663235-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Resctrl is a filesystem interface to hardware that provides cache
allocation policy and bandwidth control for groups of tasks or CPUs.
To support more than one architecture, resctrl needs to live in /fs/.
Move the code that is concerned with the filesystem interface to
/fs/resctrl.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-25-james.morse@arm.com
|
|
x86 has an array, rdt_resources_all[], of all possible resources.
The for-each-resource walkers depend on the rid field of all
resources being initialised.
If the array ever grows due to another architecture adding a resource
type that is not defined on x86, the for-each-resources walkers will
loop forever.
Initialise all the rid values in resctrl_arch_late_init() before
any for-each-resource walker can be called.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-24-james.morse@arm.com
|
|
checkpatch.pl identifies some direct #includes of asm headers that
can be satisfied by including the corresponding <linux/...> header
instead.
Fix them.
No intentional functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-23-james.morse@arm.com
|
|
rdt_init_fs_context() sizes a typed allocation using an explicit
sizeof(type) expression, which checkpatch.pl complains about.
Since this code is about to be factored out and made generic, this
is a good opportunity to fix the code to size the allocation based
on the target pointer instead, to reduce the chance of future mis-
maintenance.
Fix it.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-22-james.morse@arm.com
|
|
checkpatch.pl complains about some whitespace anomalies in the
resctrl core code.
This doesn't matter, but since this code is about to be factored
out and made generic, this is a good opportunity to fix these
issues and so reduce future checkpatch fuzz.
Fix them.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-21-james.morse@arm.com
|
|
In the case of ICH_LR<n>.HW == 1, bit 41 of LR is just a part of pINTID
without EOI meaning, and bit 41 will be zeroed by the subsequent clearing
of ICH_LR_PHYS_ID_MASK anyway.
No functional changes intended.
Signed-off-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Link: https://lore.kernel.org/r/20250512133223.866999-1-r09922117@csie.ntu.edu.tw
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
If MTE_frac is masked out unconditionally then the guest will always
see ID_AA64PFR1_EL1_MTE_frac as 0. However, a value of 0 when
ID_AA64PFR1_EL1_MTE is 2 indicates that MTE_ASYNC is supported. Hence, for
a host with ID_AA64PFR1_EL1_MTE==2 and ID_AA64PFR1_EL1_MTE_frac==0xf
(MTE_ASYNC unsupported) the guest would see MTE_ASYNC advertised as
supported whilst the host does not support it. Hence, expose the sanitised
value of MTE_frac to the guest and user-space.
As MTE_frac was previously hidden, always 0, and KVM must accept values
from KVM provided by user-space, when ID_AA64PFR1_EL1.MTE is 2 allow
user-space to set ID_AA64PFR1_EL1.MTE_frac to 0. However, ignore it to
avoid incorrectly claiming hardware support for MTE_ASYNC in the guest.
Note that linux does not check the value of ID_AA64PFR1_EL1_MTE_frac and
wrongly assumes that MTE async faults can be generated even on hardware
that does nto support them. This issue is not addressed here.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Link: https://lore.kernel.org/r/20250512114112.359087-3-ben.horgan@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM exposes the sanitised ID registers to guests. Currently these ignore
the ID_AA64PFR1_EL1.MTE_frac field, meaning guests always see a value of
zero.
This is a problem for platforms without the MTE_ASYNC feature where
ID_AA64PFR1_EL1.MTE==0x2 and ID_AA64PFR1_EL1.MTE_frac==0xf. KVM forces
MTE_frac to zero, meaning the guest believes MTE_ASYNC is supported, when
no async fault will ever occur.
Before KVM can fix this, the architecture needs to sanitise the ID
register field for MTE_frac.
Linux itself does not use MTE_frac field and just assumes MTE async faults
can be generated if MTE is supported.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Link: https://lore.kernel.org/r/20250512114112.359087-2-ben.horgan@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The resctrl pseudo-lock feature allows an architecture to allocate data
into particular cache portions, which are then treated as reserved to
avoid that data ever being evicted. Setting this up is deeply architecture
specific as it involves disabling prefetchers etc. It is not possible
to support this kind of feature on arm64. Risc-V is assumed to be the
same.
The prototypes for the architecture code were added to x86's asm/resctrl.h,
with other architectures able to provide stubs for their architecture. This
forces other architectures to provide identical stubs.
Move the prototypes and stubs to linux/resctrl.h, and switch between them
using the existing Kconfig symbol.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-20-james.morse@arm.com
|
|
resctrl_arch_mon_ctx_alloc() and resctrl_arch_mon_ctx_free() take an enum
resctrl_event_id that is already defined in resctrl_types.h to be
accessible to asm/resctrl.h.
The x86 stubs take an int. Fix that.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-19-james.morse@arm.com
|
|
Once the filesystem parts of resctrl move to fs/resctrl, it cannot rely
on definitions in x86's internal.h.
Move definitions in internal.h that need to be shared between the
filesystem and architecture code to header files that fs/resctrl can
include.
Doing this separately means the filesystem code only moves between files
of the same name, instead of having these changes mixed in too.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-17-james.morse@arm.com
|
|
Commit bbeb69ce3013 ("x86/mm: Remove CONFIG_HIGHMEM64G support") introduces
a new warning message MSG_HIGHMEM_TRIMMED, which accidentally introduces a
duplicated 'for for' in the warning message.
Remove this duplicated word.
This was noticed while reviewing for references to obsolete kernel build
config options.
Fixes: bbeb69ce3013 ("x86/mm: Remove CONFIG_HIGHMEM64G support")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: https://lore.kernel.org/r/20250516090810.556623-1-lukas.bulwahn@redhat.com
|
|
Add Makefile and Kconfig for fs/resctrl. Add ARCH_HAS_CPU_RESCTRL
for the common parts of the resctrl interface and make X86_CPU_RESCTRL
select this.
Adding an include of asm/resctrl.h to linux/resctrl.h allows the
/fs/resctrl files to switch over to using this header instead.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-16-james.morse@arm.com
|
|
hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor()
In order to let all the APIs under <cpuid/api.h> have a shared "cpuid_"
namespace, rename hypervisor_cpuid_base() to cpuid_base_hypervisor().
To align with the new style, also rename:
for_each_possible_hypervisor_cpuid_base(function)
to:
for_each_possible_cpuid_base_hypervisor(function)
Adjust call-sites accordingly.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/aCZOi0Oohc7DpgTo@lx-t490
|
|
The CPUID(0x2) descriptors iterator has been renamed from:
for_each_leaf_0x2_entry()
to:
for_each_cpuid_0x2_desc()
since it iterates over CPUID(0x2) cache and TLB "descriptors", not
"entries".
In the macro's x86/cpu call-site, rename the parameter denoting the
parsed descriptor at each iteration from 'entry' to 'desc'.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-8-darwi@linutronix.de
|
|
The CPUID(0x2) descriptors iterator has been renamed from:
for_each_leaf_0x2_entry()
to:
for_each_cpuid_0x2_desc()
since it iterates over CPUID(0x2) cache and TLB "descriptors", not
"entries".
In the macro's x86/cacheinfo call-site, rename the parameter denoting the
parsed descriptor at each iteration from 'entry' to 'desc'.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-7-darwi@linutronix.de
|
|
Rename the CPUID(0x2) register accessor function:
cpuid_get_leaf_0x2_regs(regs)
to:
cpuid_leaf_0x2(regs)
for consistency with other <cpuid/api.h> accessors that return full CPUID
registers outputs like:
cpuid_leaf(regs)
cpuid_subleaf(regs)
In the same vein, rename the CPUID(0x2) iteration macro:
for_each_leaf_0x2_entry()
to:
for_each_cpuid_0x2_desc()
to include "cpuid" in the macro name, and since what is iterated upon is
CPUID(0x2) cache and TLB "descriptos", not "entries". Prefix an
underscore to that iterator macro parameters, so that the newly renamed
'desc' parameter do not get mixed with "union leaf_0x2_regs :: desc[]" in
the macro's implementation.
Adjust all the affected call-sites accordingly.
While at it, use "CPUID(0x2)" instead of "CPUID leaf 0x2" as this is the
recommended style.
No change in functionality intended.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-6-darwi@linutronix.de
|
|
trace.h contains all the tracepoints. After the move to /fs/resctrl, some
of these will be left behind. All the pseudo_lock tracepoints remain part
of the architecture. The lone tracepoint in monitor.c moves to /fs/resctrl.
Split trace.h so that each C file includes a different trace header file.
This means the trace header files are not modified when they are moved.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-14-james.morse@arm.com
|
|
MPAM platforms retrieve the cache-id property from the ACPI PPTT table.
The cache-id field is 32 bits wide. Under resctrl, the cache-id becomes
the domain-id, and is packed into the mon_data_bits union bitfield.
The width of cache-id in this field is 14 bits.
Expanding the union would break 32bit x86 platforms as this union is
stored as the kernfs kn->priv pointer. This saved allocating memory
for the priv data storage.
The firmware on MPAM platforms have used the PPTT cache-id field to
expose the interconnect's id for the cache, which is sparse and uses
more than 14 bits. Use of this id is to enable PCIe direct cache
injection hints. Using this feature with VFIO means the value provided
by the ACPI table should be exposed to user-space.
To support cache-id values greater than 14 bits, convert the
mon_data_bits union to a structure. These are shared between control
and monitor groups, and are allocated on first use. The list of
allocated struct mon_data is free'd when the filesystem is umount()ed.
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-13-james.morse@arm.com
|
|
The resctrl_event_id enum gives names to the counter event numbers on x86.
These are used directly by resctrl.
To allow the MPAM driver to keep an array of these the size of the enum
needs to be known.
Add a 'num_events' enum entry which can be used to size an array. This is
added to the enum to reduce conflicts with another series, which in turn
requires get_arch_mbm_state() to have a default case.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-12-james.morse@arm.com
|
|
Page fault tracepoints are interesting for other architectures as well.
Move them to be generic.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-trace-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/89c2f284adf9b4c933f0e65811c50cef900a5a95.1747046848.git.namcao@linutronix.de
|
|
trace_pagefault_key is used to optimize the pagefault tracepoints when it
is disabled. However, tracepoints already have built-in static_key for this
exact purpose.
Remove this redundant key.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-trace-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/827c7666d2989f08742a4fb869b1ed5bfaaf1dbf.1747046848.git.namcao@linutronix.de
|
|
is_mba_sc() is defined in core.c, but has no callers there. It does not access
any architecture private structures.
Move this to rdtgroup.c where the majority of callers are. This makes the move
of the filesystem code to /fs/ cleaner.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-11-james.morse@arm.com
|
|
Add fixed-partitions for spi-nor flash to match the at91 boot flow
and layout of the nand flash.
Partitions can be listed from /proc/mtd:
[root@sama7g54 ~]$ cat /proc/mtd | grep qspi
mtd6: 00040000 00001000 "qspi1: at91bootstrap"
mtd7: 00100000 00001000 "qspi1: u-boot"
mtd8: 00040000 00001000 "qspi1: u-boot env"
mtd9: 00080000 00001000 "qspi1: device tree"
mtd10: 00600000 00001000 "qspi1: kernel"
[root@sama7g54 ~]$ mtdinfo /dev/mtd10
mtd10
Name: qspi1: kernel
Type: nor
Eraseblock size: 4096 bytes, 4.0 KiB
Amount of eraseblocks: 1536 (6291456 bytes, 6.0 MiB)
Minimum input/output unit size: 1 byte
Sub-page size: 1 byte
Character device major/minor: 90:20
Bad blocks are allowed: false
Device is writable: true
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20250429064547.5807-1-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add RTT timer with backup register for SAMA7D65_Curiosity board.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/463581224a07bf122c6907d34a0c5c71b1cc73e1.1744666011.git.Ryan.Wanner@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
