summaryrefslogtreecommitdiff
path: root/drivers/accel
AgeCommit message (Collapse)Author
2024-05-17accel/ivpu: Split IP and buttress headersWachowski, Karol
Move buttress registers to ivpu_hw_btrs_*_reg.h headers. This is an intermediate step before HW layer refactor. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240515113006.457472-2-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Share NPU busy time in sysfsTomasz Rusinowicz
The driver tracks the time spent by NPU executing jobs and shares it through sysfs `npu_busy_time_us` file. It can be then used by user space applications to monitor device utilization. NPU is considered 'busy' starting with a first job submitted to firmware and ending when there is no more jobs pending/executing. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-13-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Increase reset counter when warm boot failsJacek Lawrynowicz
Failed warm boot causes a cold boot that looses FW state and is equivalent to a recovery or reset, so reset_counter should be incremented in order for this failure to be detected by tests. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-12-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Configure fw logging using debugfsTomasz Rusinowicz
Add fw_dyndbg file that can be used to control FW logging. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-11-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Add force snoop module parameterWachowski, Karol
Add module parameter that enforces snooping for all NPU accesses, both through MMU PTEs mappings and through TCU page table walk override register bits for MMU page walks / configuration access. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-10-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Add NPU profiling supportTomasz Rusinowicz
Implement time based Metric Streamer profiling UAPI. This is a generic mechanism allowing user mode tools to sample NPU metrics. These metrics are defined by the FW and transparent to the driver. The user space can check for this feature by checking DRM_IVPU_CAP_METRIC_STREAMER driver capability. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-9-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Add resume engine supportWachowski, Karol
Create debugfs interface that triggers sending resume engine IPC command to VPU. It is used to test engine resume functionality in driver user space tests. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-8-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Implement support for hardware schedulerWachowski, Karol
Add support for HWS (hardware scheduler). It is disabled by default. The sched_mode module param can be used to enable it. Each context has multiple command queues with different priorities and HWS enables priority based execution on the HW/FW side. The driver in HWS mode has to send a couple additional messages to initialize HWS and describe command queue priorities. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-7-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Add HWS JSM messagesWachowski, Karol
Add JSM messages that will be used to implement hardware scheduler. Most of these messages are used to create and manage HWS specific command queues. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-6-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Implement support for preemption buffersWachowski, Karol
Allocate per-context preemption buffers that are required by HWS. There are two preemption buffers: * primary - allocated in user memory range (PIOVA accessible) * secondary - allocated in shave memory range Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-5-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Create priority based command queuesWachowski, Karol
Create multiple command queues per engine with different priorities. The cmdqs are created on-demand and they support 4 priority levels. These priorities will later be used by the HWS (hardware scheduler). Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-4-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Add sched_mode module paramWachowski, Karol
This param will be used to enable/disable HWS (hardware scheduler). The HWS is a FW side feature and may not be available on all HW generations and FW versions. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-3-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Update VPU FW API headersJacek Lawrynowicz
Update JSM API to 3.16.0. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-2-jacek.lawrynowicz@linux.intel.com
2024-04-25fix missing vmalloc.h includesKent Overstreet
Patch series "Memory allocation profiling", v6. Overview: Low overhead [1] per-callsite memory allocation profiling. Not just for debug kernels, overhead low enough to be deployed in production. Example output: root@moria-kvm:~# sort -rn /proc/allocinfo 127664128 31168 mm/page_ext.c:270 func:alloc_page_ext 56373248 4737 mm/slub.c:2259 func:alloc_slab_page 14880768 3633 mm/readahead.c:247 func:page_cache_ra_unbounded 14417920 3520 mm/mm_init.c:2530 func:alloc_large_system_hash 13377536 234 block/blk-mq.c:3421 func:blk_mq_alloc_rqs 11718656 2861 mm/filemap.c:1919 func:__filemap_get_folio 9192960 2800 kernel/fork.c:307 func:alloc_thread_stack_node 4206592 4 net/netfilter/nf_conntrack_core.c:2567 func:nf_ct_alloc_hashtable 4136960 1010 drivers/staging/ctagmod/ctagmod.c:20 [ctagmod] func:ctagmod_start 3940352 962 mm/memory.c:4214 func:alloc_anon_folio 2894464 22613 fs/kernfs/dir.c:615 func:__kernfs_new_node ... Usage: kconfig options: - CONFIG_MEM_ALLOC_PROFILING - CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT - CONFIG_MEM_ALLOC_PROFILING_DEBUG adds warnings for allocations that weren't accounted because of a missing annotation sysctl: /proc/sys/vm/mem_profiling Runtime info: /proc/allocinfo Notes: [1]: Overhead To measure the overhead we are comparing the following configurations: (1) Baseline with CONFIG_MEMCG_KMEM=n (2) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) (3) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) (4) Enabled at runtime (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n && /proc/sys/vm/mem_profiling=1) (5) Baseline with CONFIG_MEMCG_KMEM=y && allocating with __GFP_ACCOUNT (6) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) && CONFIG_MEMCG_KMEM=y (7) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) && CONFIG_MEMCG_KMEM=y Performance overhead: To evaluate performance we implemented an in-kernel test executing multiple get_free_page/free_page and kmalloc/kfree calls with allocation sizes growing from 8 to 240 bytes with CPU frequency set to max and CPU affinity set to a specific CPU to minimize the noise. Below are results from running the test on Ubuntu 22.04.2 LTS with 6.8.0-rc1 kernel on 56 core Intel Xeon: kmalloc pgalloc (1 baseline) 6.764s 16.902s (2 default disabled) 6.793s (+0.43%) 17.007s (+0.62%) (3 default enabled) 7.197s (+6.40%) 23.666s (+40.02%) (4 runtime enabled) 7.405s (+9.48%) 23.901s (+41.41%) (5 memcg) 13.388s (+97.94%) 48.460s (+186.71%) (6 def disabled+memcg) 13.332s (+97.10%) 48.105s (+184.61%) (7 def enabled+memcg) 13.446s (+98.78%) 54.963s (+225.18%) Memory overhead: Kernel size: text data bss dec diff (1) 26515311 18890222 17018880 62424413 (2) 26524728 19423818 16740352 62688898 264485 (3) 26524724 19423818 16740352 62688894 264481 (4) 26524728 19423818 16740352 62688898 264485 (5) 26541782 18964374 16957440 62463596 39183 Memory consumption on a 56 core Intel CPU with 125GB of memory: Code tags: 192 kB PageExts: 262144 kB (256MB) SlabExts: 9876 kB (9.6MB) PcpuExts: 512 kB (0.5MB) Total overhead is 0.2% of total memory. Benchmarks: Hackbench tests run 100 times: hackbench -s 512 -l 200 -g 15 -f 25 -P baseline disabled profiling enabled profiling avg 0.3543 0.3559 (+0.0016) 0.3566 (+0.0023) stdev 0.0137 0.0188 0.0077 hackbench -l 10000 baseline disabled profiling enabled profiling avg 6.4218 6.4306 (+0.0088) 6.5077 (+0.0859) stdev 0.0933 0.0286 0.0489 stress-ng tests: stress-ng --class memory --seq 4 -t 60 stress-ng --class cpu --seq 4 -t 60 Results posted at: https://evilpiepirate.org/~kent/memalloc_prof_v4_stress-ng/ [2] https://lore.kernel.org/all/20240306182440.2003814-1-surenb@google.com/ This patch (of 37): The next patch drops vmalloc.h from a system header in order to fix a circular dependency; this adds it to all the files that were pulling it in implicitly. [kent.overstreet@linux.dev: fix arch/alpha/lib/memcpy.c] Link: https://lkml.kernel.org/r/20240327002152.3339937-1-kent.overstreet@linux.dev [surenb@google.com: fix arch/x86/mm/numa_32.c] Link: https://lkml.kernel.org/r/20240402180933.1663992-1-surenb@google.com [kent.overstreet@linux.dev: a few places were depending on sizes.h] Link: https://lkml.kernel.org/r/20240404034744.1664840-1-kent.overstreet@linux.dev [arnd@arndb.de: fix mm/kasan/hw_tags.c] Link: https://lkml.kernel.org/r/20240404124435.3121534-1-arnd@kernel.org [surenb@google.com: fix arc build] Link: https://lkml.kernel.org/r/20240405225115.431056-1-surenb@google.com Link: https://lkml.kernel.org/r/20240321163705.3067592-1-surenb@google.com Link: https://lkml.kernel.org/r/20240321163705.3067592-2-surenb@google.com Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Tested-by: Kees Cook <keescook@chromium.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Andreas Hindborg <a.hindborg@samsung.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Gary Guo <gary@garyguo.net> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-25drm/print: drop include debugfs.h and include where neededJani Nikula
Surprisingly many places depend on debugfs.h to be included via drm_print.h. Fix them. v3: Also fix armada, ite-it6505, imagination, msm, sti, vc4, and xe v2: Also fix ivpu and vmwgfx Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240410141434.157908-1-jani.nikula@intel.com Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # drm/msm Acked-by: Matt Coster <matt.coster@imgtec.com> # drm/imagination Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Robert Foss <rfoss@kernel.org> #drm/bridge Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422121011.4133236-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-22Backmerge tag 'v6.9-rc5' into drm-nextDave Airlie
Linux 6.9-rc5 I've had a persistent msm failure on clang, and the fix is in fixes so just pull it back to fix that. Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-04-12accel/qaic: mark debugfs stub functions as static inlineArnd Bergmann
The alternative stub functions are listed as global, which produces a build failure in some configs: In file included from drivers/accel/qaic/qaic_drv.c:31: drivers/accel/qaic/qaic_debugfs.h:16:5: error: no previous prototype for 'qaic_bootlog_register' [-Werror=missing-prototypes] 16 | int qaic_bootlog_register(void) { return 0; } | ^~~~~~~~~~~~~~~~~~~~~ drivers/accel/qaic/qaic_debugfs.h:17:6: error: no previous prototype for 'qaic_bootlog_unregister' [-Werror=missing-prototypes] 17 | void qaic_bootlog_unregister(void) {} | ^~~~~~~~~~~~~~~~~~~~~~~ drivers/accel/qaic/qaic_debugfs.h:18:6: error: no previous prototype for 'qaic_debugfs_init' [-Werror=missing-prototypes] 18 | void qaic_debugfs_init(struct qaic_drm_device *qddev) {} | ^~~~~~~~~~~~~~~~~ Make them static inline as intended. Fixes: 5f8df5c6def6 ("accel/qaic: Add bootlog debugfs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409133945.2976190-1-arnd@kernel.org
2024-04-12accel/qaic: Add Sahara implementation for firmware loadingJeffrey Hugo
The AIC100 secondary bootloader uses the Sahara protocol for two purposes - loading the runtime firmware images from the host, and offloading crashdumps to the host. The crashdump functionality is only invoked when the AIC100 device encounters a crash and dumps are enabled. Also the collection of the dump is optional - the host can reject collecting the dump. The Sahara protocol contains many features and modes including firmware upload, crashdump download, and client commands. For simplicity, implement the parts of the protocol needed for loading firmware to the device. Fundamentally, the Sahara protocol is an embedded file transfer protocol. Both sides negotiate a connection through a simple exchange of hello messages. After handshaking through a hello message, the device either sends a message requesting images, or a message advertising the memory dump available for the host. For image transfer, the remote device issues a read data request that provides an image (by ID), an offset, and a length. The host has an internal mapping of image IDs to filenames. The host is expected to access the image and transfer the requested chunk to the device. The device can issue additional read requests, or signal that it has consumed enough data from this image with an end of image message. The host confirms the end of image, and the device can proceed with another image by starting over with the hello exchange again. Some images may be optional, and only provided as part of a provisioning flow. The host is not aware of this information, and thus should report an error to the device when an image is not available. The device will evaluate if the image is required or not, and take the appropriate action. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240322034917.3522388-1-quic_jhugo@quicinc.com
2024-04-08accel/ivpu: Fix deadlock in context_xaJacek Lawrynowicz
ivpu_device->context_xa is locked both in kernel thread and IRQ context. It requires XA_FLAGS_LOCK_IRQ flag to be passed during initialization otherwise the lock could be acquired from a thread and interrupted by an IRQ that locks it for the second time causing the deadlock. This deadlock was reported by lockdep and observed in internal tests. Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU") Cc: <stable@vger.kernel.org> # v6.3+ Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-9-jacek.lawrynowicz@linux.intel.com
2024-04-08accel/ivpu: Fix missed error message after VPU renameJacek Lawrynowicz
Change "VPU" to "NPU" in ivpu_suspend() so it matches all other error messages. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-8-jacek.lawrynowicz@linux.intel.com
2024-04-08accel/ivpu: Return max freq for DRM_IVPU_PARAM_CORE_CLOCK_RATEJacek Lawrynowicz
DRM_IVPU_PARAM_CORE_CLOCK_RATE returns current NPU frequency which could be 0 if device was sleeping. This value isn't really useful to the user space, so return max freq instead which can be used to estimate NPU performance. Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up") Cc: <stable@vger.kernel.org> # v6.7 Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-7-jacek.lawrynowicz@linux.intel.com
2024-04-08accel/ivpu: Improve clarity of MMU error messagesWachowski, Karol
This patch improves readability and clarity of MMU error messages. Previously, the error strings were somewhat confusing and could lead to ambiguous interpretations, making it difficult to diagnose issues. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-6-jacek.lawrynowicz@linux.intel.com
2024-04-08accel/ivpu: Put NPU back to D3hot after failed resumeJacek Lawrynowicz
Put NPU in D3hot after ivpu_resume() fails to power up the device. This will assure that D3->D0 power cycle will be performed before the next resume and also will minimize power usage in this corner case. Fixes: 28083ff18d3f ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery") Cc: <stable@vger.kernel.org> # v6.8+ Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-5-jacek.lawrynowicz@linux.intel.com
2024-04-08accel/ivpu: Fix PCI D0 state entry in resumeWachowski, Karol
In case of failed power up we end up left in PCI D3hot state making it impossible to access NPU registers on retry. Enter D0 state on retry before proceeding with power up sequence. Fixes: 28083ff18d3f ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery") Cc: <stable@vger.kernel.org> # v6.8+ Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-4-jacek.lawrynowicz@linux.intel.com
2024-04-08accel/ivpu: Remove d3hot_after_power_off WAJacek Lawrynowicz
Always enter D3hot after entering D0i3 an all platforms. This minimizes power usage. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-3-jacek.lawrynowicz@linux.intel.com
2024-04-08accel/ivpu: Check return code of ipc->lock initWachowski, Karol
Return value of drmm_mutex_init(ipc->lock) was unchecked. Fixes: 5d7422cfb498 ("accel/ivpu: Add IPC driver and JSM messages") Cc: <stable@vger.kernel.org> # v6.3+ Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-2-jacek.lawrynowicz@linux.intel.com
2024-04-05accel/qaic: Add fifo queued debugfsJeffrey Hugo
When debugging functional issues with workload input processing, it is useful to know if requests are backing up in the fifo, or perhaps getting stuck elsewhere. To answer the question of how many requests are in the fifo, implement a "queued" debugfs entry per-dbc that returns the number of pending requests when read. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240322175730.3855440-4-quic_jhugo@quicinc.com
2024-04-05accel/qaic: Add fifo size debugfsJeffrey Hugo
Each DMA Bridge Channel (dbc) has a unique configured fifo size which is specified by the userspace client of that dbc. Since the fifo is circular, it is useful to know the configured size when debugging issues. Add a per-dbc subdirectory in debugfs and in each subdirectory add a fifo_size entry that will display the size of that dbc's fifo when read. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240322175730.3855440-3-quic_jhugo@quicinc.com
2024-04-05accel/qaic: Add bootlog debugfsJeffrey Hugo
During the boot process of AIC100, the bootloaders (PBL and SBL) log messages to device RAM. During SBL, if the host opens the QAIC_LOGGING channel, SBL will offload the contents of the log buffer to the host, and stream any new messages that SBL logs. This log of the boot process can be very useful for an initial triage of any boot related issues. For example, if SBL rejects one of the runtime firmware images for a validation failure, SBL will log a reason why. Add the ability of the driver to open the logging channel, receive the messages, and store them. Also define a debugfs entry called "bootlog" by hooking into the DRM debugfs framework. When the bootlog debugfs entry is read, the current contents of the log that the host is caching is displayed to the user. The driver will retain the cache until it detects that the device has rebooted. At that point, the cache will be freed, and the driver will wait for a new log. With this scheme, the driver will only have a cache of the log from the current device boot. Note that if the driver initializes a device and it is already in the runtime state (QSM), no bootlog will be available through this mechanism because the driver and SBL have not communicated. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240322175730.3855440-2-quic_jhugo@quicinc.com
2024-03-13Merge tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights are usual, more AMD IP blocks for future hw, i915/xe changes, Displayport tunnelling support for i915, msm YUV over DP changes, new tests for ttm, but its mostly a lot of stuff all over the place from lots of people. core: - EDID cleanups - scheduler error handling fixes - managed: add drmm_release_action() with tests - add ratelimited drm debug print - DPCD PSR early transport macro - DP tunneling and bandwidth allocation helpers - remove built-in edids - dp: Avoid AUX transfers on powered-down displays - dp: Add VSC SDP helpers cross drivers: - use new drm print helpers - switch to ->read_edid callback - gem: add stats for shared buffers plus updates to amdgpu, i915, xe syncobj: - fixes to waiting and sleeping ttm: - add tests - fix errno codes - simply busy-placement handling - fix page decryption media: - tc358743: fix v4l device registration video: - move all kernel parameters for video behind CONFIG_VIDEO sound: - remove <drm/drm_edid.h> include from header ci: - add tests for msm - fix apq8016 runner efifb: - use copy of global screen_info state vesafb: - use copy of global screen_info state simplefb: - fix logging bridge: - ite-6505: fix DP link-training bug - samsung-dsim: fix error checking in probe - samsung-dsim: add bsh-smm-s2/pro boards - tc358767: fix regmap usage - imx: add i.MX8MP HDMI PVI plus DT bindings - imx: add i.MX8MP HDMI TX plus DT bindings - sii902x: fix probing and unregistration - tc358767: limit pixel PLL input range - switch to new drm_bridge_read_edid() interface panel: - ltk050h3146w: error-handling fixes - panel-edp: support delay between power-on and enable; use put_sync in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings - panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings - panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings - add BOE TH101MB31IG002-28A plus DT bindings - add EDT ETML1010G3DRA plus DT bindings - add Novatek NT36672E LCD DSI plus DT bindings - nt36523: support 120Hz timings, fix includes - simple: fix display timings on RK32FN48H - visionox-vtdr6130: fix initialization - add Powkiddy RGB10MAX3 plus DT bindings - st7703: support panel rotation plus DT bindings - add Himax HX83112A plus DT bindings - ltk500hd1829: add support for ltk101b4029w and admatec 9904370 - simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs panel-orientation-quirks: - GPD Win Mini amdgpu: - Validate DMABuf imports in compute VMs - Add RAS ACA framework - PSP 13 fixes - Misc code cleanups - Replay fixes - Atom interpretor PS, WS bounds checking - DML2 fixes - Audio fixes - DCN 3.5 Z state fixes - Remove deprecated ida_simple usage - UBSAN fixes - RAS fixes - Enable seq64 infrastructure - DC color block enablement - Documentation updates - DC documentation updates - DMCUB updates - ATHUB 4.1 support - LSDMA 7.0 support - JPEG DPG support - IH 7.0 support - HDP 7.0 support - VCN 5.0 support - SMU 13.0.6 updates - NBIO 7.11 updates - SDMA 6.1 updates - MMHUB 3.3 updates - DCN 3.5.1 support - NBIF 6.3.1 support - VPE 6.1.1 support amdkfd: - Validate DMABuf imports in compute VMs - SVM fixes - Trap handler updates and enhancements - Fix cache size reporting - Relocate the trap handler radeon: - Atom interpretor PS, WS bounds checking - Misc code cleanups xe: - new query for GuC submission version - Remove unused persistent exec_queues - Add vram frequency sysfs attributes - Add the flag XE_VM_BIND_FLAG_DUMPABLE - Drop pre-production workarounds - Drop kunit tests for unsupported platforms - Start pumbling SR-IOV support with memory based interrupts for VF - Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC to work with memory based interrupts - Add GuC Doorbells Manager as prep work SR-IOV - Implement additional workarounds for xe2 and MTL - Program a few registers according to perfomance guide spec for Xe2 - Fix remaining 32b build issues and enable it back - Fix build with CONFIG_DEBUG_FS=n - Fix warnings from GuC ABI headers - Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF - Release mmap mappings on rpm suspend - Disable mid-thread preemption when not properly supported by hardware - Fix xe_exec by reserving extra fence slot for CPU bind - Fix xe_exec with full long running exec queue - Canonicalize addresses where needed for Xe2 and add to devcoredum - Toggle USM support for Xe2 - Only allow 1 ufence per exec / bind IOCTL - Add GuC firmware loading for Lunar Lake - Add XE_VMA_PTE_64K VMA flag i915: - Add more ADL-N PCI IDs - Enable fastboot also on older platforms - Early transport for panel replay and PSR - New ARL PCI IDs - DP TPS4 PHY test pattern support - Unify and improve VSC SDP for PSR and non-PSR cases - Refactor memory regions and improve debug logging - Rework global state serialization - Remove unused CDCLK divider fields - Unify HDCP connector logging format - Use display instead of graphics version in display code - Move VBT and opregion debugfs next to the implementation - Abstract opregion interface, use opaque type - MTL fixes - HPD handling fixes - Add GuC submission interface version query - Atomically invalidate userptr on mmu-notifier - Update handling of MMIO triggered reports - Don't make assumptions about intel_wakeref_t type - Extend driver code of Xe_LPG to Xe_LPG+ - Add flex arrays to struct i915_syncmap - Allow for very slow HuC loading - DP tunneling and bandwidth allocation support msm: - Correct bindings for MSM8976 and SM8650 platforms - Start migration of MDP5 platforms to DPU driver - X1E80100 MDSS support - DPU: - Improve DSC allocation, fixing several important corner cases - Add support for SDM630/SDM660 platforms - Simplify dpu_encoder_phys_ops - Apply fixes targeting DSC support with a single DSC encoder - Apply fixes for HCTL_EN timing configuration - X1E80100 support - Add support for YUV420 over DP - GPU: - fix sc7180 UBWC config - fix a7xx LLC config - new gpu support: a305B, a750, a702 - machine support: SM7150 (different power levels than other a618) - a7xx devcoredump support habanalabs: - configure IRQ affinity according to NUMA node - move HBM MMU page tables inside the HBM - improve device reset - check extended PCIe errors ivpu: - updates to firmware API - refactor BO allocation imx: - use devm_ functions during init hisilicon: - fix EDID includes mgag200: - improve ioremap usage - convert to struct drm_edid - Work around PCI write bursts nouveau: - disp: use kmemdup() - fix EDID includes - documentation fixes qaic: - fixes to BO handling - make use of DRM managed release - fix order of remove operations rockchip: - analogix_dp: get encoder port from DT - inno_hdmi: support HDMI for RK3128 - lvds: error-handling fixes ssd130x: - support SSD133x plus DT bindings tegra: - fix error handling tilcdc: - make use of DRM managed release v3d: - show memory stats in debugfs - Support display MMU page size vc4: - fix error handling in plane prepare_fb - fix framebuffer test in plane helpers virtio: - add venus capset defines vkms: - fix OOB access when programming the LUT - Kconfig improvements vmwgfx: - unmap surface before changing plane state - fix memory leak in error handling - documentation fixes - list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid - fix null-pointer deref in execbuf - refactor display-mode probing - fix fencing for creating cursor MOBs - fix cursor-memory lifetime xlnx: - fix live video input for ZynqMP DPSUB lima: - fix memory leak loongson: - fail if no VRAM present meson: - switch to new drm_bridge_read_edid() interface renesas: - add RZ/G2L DU support plus DT bindings mxsfb: - Use managed mode config sun4i: - HDMI: updates to atomic mode setting mediatek: - Add display driver for MT8188 VDOSYS1 - DSI driver cleanups - Filter modes according to hardware capability - Fix a null pointer crash in mtk_drm_crtc_finish_page_flip etnaviv: - enhancements for NPU and MRT support" * tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits) drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo drm/amd/pm: wait for completion of the EnableGfxImu message drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1 drm/amdgpu: add smu 14.0.1 support drm/amdgpu: add VPE 6.1.1 discovery support drm/amdgpu/vpe: add VPE 6.1.1 support drm/amdgpu/vpe: don't emit cond exec command under collaborate mode drm/amdgpu/vpe: add collaborate mode support for VPE drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE drm/amdgpu/vpe: add multi instance VPE support drm/amdgpu/discovery: add nbif v6_3_1 ip block drm/amdgpu: Add nbif v6_3_1 ip block support drm/amdgpu: Add pcie v6_1_0 ip headers (v5) drm/amdgpu: Add nbif v6_3_1 ip headers (v5) arch/powerpc: Remove <linux/fb.h> from backlight code macintosh/via-pmu-backlight: Include <linux/backlight.h> fbdev/chipsfb: Include <linux/backlight.h> drm/etnaviv: Restore some id values drm/amdkfd: make kfd_class constant drm/amdgpu: add ring timeout information in devcoredump ...
2024-03-13Merge tag 'pm-6.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "From the functional perspective, the most significant change here is the addition of support for Energy Models that can be updated dynamically at run time. There is also the addition of LZ4 compression support for hibernation, the new preferred core support in amd-pstate, new platforms support in the Intel RAPL driver, new model-specific EPP handling in intel_pstate and more. Apart from that, the cpufreq default transition delay is reduced from 10 ms to 2 ms (along with some related adjustments), the system suspend statistics code undergoes a significant rework and there is a usual bunch of fixes and code cleanups all over. Specifics: - Allow the Energy Model to be updated dynamically (Lukasz Luba) - Add support for LZ4 compression algorithm to the hibernation image creation and loading code (Nikhil V) - Fix and clean up system suspend statistics collection (Rafael Wysocki) - Simplify device suspend and resume handling in the power management core code (Rafael Wysocki) - Fix PCI hibernation support description (Yiwei Lin) - Make hibernation take set_memory_ro() return values into account as appropriate (Christophe Leroy) - Set mem_sleep_current during kernel command line setup to avoid an ordering issue with handling it (Maulik Shah) - Fix wake IRQs handling when pm_runtime_force_suspend() is used as a driver's system suspend callback (Qingliang Li) - Simplify pm_runtime_get_if_active() usage and add a replacement for pm_runtime_put_autosuspend() (Sakari Ailus) - Add a tracepoint for runtime_status changes tracking (Vilas Bhat) - Fix section title markdown in the runtime PM documentation (Yiwei Lin) - Enable preferred core support in the amd-pstate cpufreq driver (Meng Li) - Fix min_perf assignment in amd_pstate_adjust_perf() and make the min/max limit perf values in amd-pstate always stay within the (highest perf, lowest perf) range (Tor Vic, Meng Li) - Allow intel_pstate to assign model-specific values to strings used in the EPP sysfs interface and make it do so on Meteor Lake (Srinivas Pandruvada) - Drop long-unused cpudata::prev_cummulative_iowait from the intel_pstate cpufreq driver (Jiri Slaby) - Prevent scaling_cur_freq from exceeding scaling_max_freq when the latter is an inefficient frequency (Shivnandan Kumar) - Change default transition delay in cpufreq to 2ms (Qais Yousef) - Remove references to 10ms minimum sampling rate from comments in the cpufreq code (Pierre Gondois) - Honour transition_latency over transition_delay_us in cpufreq (Qais Yousef) - Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar) - General enhancements / cleanups to ARM cpufreq drivers (tianyu2, Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia Belova) - Update cpufreq-dt-platdev to block/approve devices (Richard Acayan) - Make the SCMI cpufreq driver get a transition delay value from firmware (Pierre Gondois) - Prevent the haltpoll cpuidle governor from shrinking guest poll_limit_ns below grow_start (Parshuram Sangle) - Avoid potential overflow in integer multiplication when computing cpuidle state parameters (C Cheng) - Adjust MWAIT hint target C-state computation in the ACPI cpuidle driver and in intel_idle to return a correct value for C0 (He Rongguang) - Address multiple issues in the TPMI RAPL driver and add support for new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui) - Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel Lezcano) - Fix kernel-doc for dtpm_create_hierarchy() (Yang Li) - Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth Norway Ananda) - Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil) - Fix a couple of warnings in the OPP core code related to W=1 builds (Viresh Kumar) - Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh Kumar) - Extend dev_pm_opp_data with turbo support (Sibi Sankar) - dt-bindings: drop maxItems from inner items (David Heidelberg)" * tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits) dt-bindings: opp: drop maxItems from inner items OPP: debugfs: Fix warning around icc_get_name() OPP: debugfs: Fix warning with W=1 builds cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h OPP: Extend dev_pm_opp_data with turbo support Fix cpupower-frequency-info.1 man page typo cpufreq: scmi: Set transition_delay_us firmware: arm_scmi: Populate fast channel rate_limit firmware: arm_scmi: Populate perf commands rate_limit cpuidle: ACPI/intel: fix MWAIT hint target C-state computation PM: sleep: wakeirq: fix wake irq warning in system suspend powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function cpufreq: Don't unregister cpufreq cooling on CPU hotplug PM: suspend: Set mem_sleep_current during kernel command line setup cpufreq: Honour transition_latency over transition_delay_us cpufreq: Limit resolving a frequency to policy min/max Documentation: PM: Fix runtime_pm.rst markdown syntax cpufreq: amd-pstate: adjust min/max limit perf cpufreq: Remove references to 10ms min sampling rate cpufreq: intel_pstate: Update default EPPs for Meteor Lake ...
2024-03-11Merge branch 'pm-runtime'Rafael J. Wysocki
Merge changes related to the runtime power management of devices for 6.9-rc1: - Simplify pm_runtime_get_if_active() usage and add a replacement for pm_runtime_put_autosuspend() (Sakari Ailus). - Add a tracepoint for runtime_status changes tracking (Vilas Bhat). - Fix section title markdown in the runtime PM documentation (Yiwei Lin). * pm-runtime: Documentation: PM: Fix runtime_pm.rst markdown syntax PM: runtime: add tracepoint for runtime_status changes PM: runtime: Add pm_runtime_put_autosuspend() replacement PM: runtime: Simplify pm_runtime_get_if_active() usage
2024-02-26Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get drm-misc-next up to v6.8-rc6. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-02-26Merge v6.8-rc6 into drm-nextDaniel Vetter
Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches, there's a few same-area-changed conflicts (xe and amdgpu mostly) that are getting a bit too annoying. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2024-02-26Merge tag 'drm-habanalabs-next-2024-02-26' of ↵Daniel Vetter
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next This tag contains habanalabs driver and accel changes for v6.9. The notable changes are: - New features and improvements: - Configure interrupt affinity according to NUMA nodes for the MSI-X interrupts that are assigned to the userspace application which acquires the device. - Move the HBM MMU page tables to reside inside the HBM to minimize latency when doing page-walks. - Improve the device reset mechanism when consecutive heartbeat failures occur (firmware fails to ack on heartbeat message). - Check also extended errors in the PCIe addr_dec interrupt information. - Rate limit the error messages that can be printed to dmesg log by userspace actions. - Firmware related fixes: - Handle requests from firmware to reserve device memory - Bug fixes and code cleanups: - constify the struct device_type usage in accel (accel_sysfs_device_minor). - Fix the PCI health check by reading uncached register. - Fix reporting of drain events. - Fix debugfs files permissions. - Fix calculation of DRAM BAR base address. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Oded Gabbay <ogabbay@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/ZdxJprop0EniVQtf@ogabbay-vm-u22.habana-labs.com
2024-02-26accel: constify the struct device_type usageRicardo B. Marliere
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Move the accel_sysfs_device_minor variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2024-02-26accel/habanalabs: modify pci health checkOfir Bitton
Today we read PCI VENDOR-ID in order to make sure PCI link is healthy. Apparently the VENDOR-ID might be stored on host and hence, when we read it we might not access the PCI bus. In order to make sure PCI health check is reliable, we will start checking the DEVICE-ID instead. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2024-02-26accel/habanalabs: keep explicit size of reserved memory for FWTomer Tayar
The reserved memory for FW is currently saved in an ASIC property in units of MB, just like the value that comes from FW. Except the fact that it is not clear from the property's name, it means also that a calculation to actual size is required everywhere that it is used. Modify the property to hold the size in bytes. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2024-02-26accel/habanalabs: handle reserved memory request when working with full FWTomer Tayar
Currently the reserved memory request from FW is handled when running with preboot only, but this request is relevant also when running with full FW. Modify to always handle this reservation request. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2024-02-26accel/habanalabs/hwmon: rate limit errors user can generateOfir Bitton
Fetching sensor data can fail due to various reasons. In order not to pollute the kernel log, those error prints must be rate limited. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2024-02-26accel/habanalabs/gaudi2: drain event lacks rd/wr indicationOfir Bitton
Due to a H/W issue, AXI drain event does not include a read/write indication, hence we remove this print. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2024-02-26accel/habanalabs: fix error printDani Liberman
The unmasking is for event and it can be other event than RAZWI. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2024-02-26accel/habanalabs: initialize maybe-uninitialized variablesTal Risin
Prevent static analysis warning. Signed-off-by: Tal Risin <trisin@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2024-02-26accel/habanalabs: fix debugfs files permissionsAvri Kehat
debugfs files are created with permissions that don't align with the access requirements. Signed-off-by: Avri Kehat <akehat@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2024-02-26accel/habanalabs: fix glbl error cause handlingTomer Tayar
The glbl error cause handling has a wrong assumption that all error bits are consecutive. Fix the handling to check all relevant error bits per ASIC. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2024-02-26accel/habanalabs/gaudi2: check extended errors according to PCIe addr_dec ↵Tomer Tayar
interrupt info The FW interrupt info for a PCIe addr_dec event is set correctly, so check for either global errors or razwi according to the indications there. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2024-02-26accel/habanalabs: modify print for skip loading linux FW to debug logTomer Tayar
Skip loading a linux FW image into the device with the current supported ASICs is done for test purposes only. Moreover, for future supported ASICs it is possible that there won't be a need to load such an image. The print in such a case is therefore not needed in most cases, so replace the used dev_info() with dev_dbg(). Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2024-02-26accel/habanalabs: remove hop size from asic propertiesFarah Kassabri
The hop size related properties is a MMU properties and not asic properties. As for PMMU and HMMU we could have different sizes. Signed-off-by: Farah Kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2024-02-26accel/habanalabs: use kcalloc() instead of kzalloc()Erick Archer
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the purpose specific kcalloc() function instead of the argument size * count in the kzalloc() function. Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1] Link: https://github.com/KSPP/linux/issues/162 Signed-off-by: Erick Archer <erick.archer@gmx.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2024-02-26accel/habanalabs/goya: remove redundant assignment to pointer 'input'Colin Ian King
The pointer input is assigned a value that is not read, it is being re-assigned again later with the same value. Resolve this by moving the declaration to input into the if block. Cleans up clang scan build warning: warning: Value stored to 'input' during its initialization is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@intel.com> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-16 00:44:50 +0000