summaryrefslogtreecommitdiff
path: root/drivers/accel
AgeCommit message (Collapse)Author
2023-10-31accel/ivpu: Abort pending rx ipc on resetStanislaw Gruszka
Waking up process, which wait for particular condition, will go to sleep again on wake_up() if the condition is not met. Add abort flag to wake up IPC receivers, which will finish with -ECANCELED error. This is only needed for reset, run time power management prevent to suspend VPU when there is pending IPC processing or pending job. Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-5-stanislaw.gruszka@linux.intel.com
2023-10-31accel/ivpu: Stop job_done_thread on suspendStanislaw Gruszka
Stop job_done thread when going to suspend. Use kthread_park() instead of kthread_stop() to avoid memory allocation and potential failure on resume. Use separate function as thread wake up condition. Use spin lock to assure rx_msg_list is properly protected against concurrent access. This avoid race condition when the rx_msg_list list is modified and read in ivpu_ipc_recive() at the same time. Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-4-stanislaw.gruszka@linux.intel.com
2023-10-31accel/ivpu: Assure device is off if power up sequence failStanislaw Gruszka
We should not leave device half enabled if there is failure somewhere it power up sequence. Fix device init and resume paths. Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-3-stanislaw.gruszka@linux.intel.com
2023-10-31accel/ivpu/40xx: Allow to change profiling frequencyKrystian Pradzynski
Profiling freq is a debug firmware feature. It switches default clock to higher resolution for fine-grained and more accurate firmware task profiling. We already configure it during boot up of VPU4. Add debugfs knob and helpers per HW generation that allow to change it. For vpu37xx the implementation is empty as profiling frequency can only be changed on VPU4 or newer. Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-2-stanislaw.gruszka@linux.intel.com
2023-10-30Merge tag 'hardening-v6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "One of the more voluminous set of changes is for adding the new __counted_by annotation[1] to gain run-time bounds checking of dynamically sized arrays with UBSan. - Add LKDTM test for stuck CPUs (Mark Rutland) - Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo) - Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva) - Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh) - Convert group_info.usage to refcount_t (Elena Reshetova) - Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva) - Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn) - Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook) - Fix strtomem() compile-time check for small sources (Kees Cook)" * tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits) hwmon: (acpi_power_meter) replace open-coded kmemdup_nul reset: Annotate struct reset_control_array with __counted_by kexec: Annotate struct crash_mem with __counted_by virtio_console: Annotate struct port_buffer with __counted_by ima: Add __counted_by for struct modsig and use struct_size() MAINTAINERS: Include stackleak paths in hardening entry string: Adjust strtomem() logic to allow for smaller sources hardening: x86: drop reference to removed config AMD_IOMMU_V2 randstruct: Fix gcc-plugin performance mode to stay in group mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by irqchip/imx-intmux: Annotate struct intmux_data with __counted_by KVM: Annotate struct kvm_irq_routing_table with __counted_by virt: acrn: Annotate struct vm_memory_region_batch with __counted_by hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by sparc: Annotate struct cpuinfo_tree with __counted_by isdn: kcapi: replace deprecated strncpy with strscpy_pad isdn: replace deprecated strncpy with strscpy NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by ...
2023-10-31Merge tag 'drm-misc-next-2023-10-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.7-rc1: drm-misc-next-2023-10-19 + following: UAPI Changes: Cross-subsystem Changes: - Convert fbdev drivers to use fbdev i/o mem helpers. Core Changes: - Use cross-references for macros in docs. - Make drm_client_buffer_addb use addfb2. - Add NV20 and NV30 YUV formats. - Documentation updates for create_dumb ioctl. - CI fixes. - Allow variable number of run-queues in scheduler. Driver Changes: - Rename drm/ast constants. - Make ili9882t its own driver. - Assorted fixes in ivpu, vc4, bridge/synopsis, amdgpu. - Add planar formats to rockchip. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3d92fae8-9b1b-4165-9ca8-5fda11ee146b@linux.intel.com
2023-10-30accel/ivpu: Add support for delayed D0i3 entry messageAndrzej Kacprowski
Currently the VPU firmware prepares for D0i3 every time the VPU is entering D0i2 Idle state. This is not optimal as we might not enter D0i3 every time we enter D0i2 Idle and this preparation is quite costly. This optimization moves D0i3 preparation to a dedicated message sent from the host driver only when the driver is about to enter D0i3 - this reduces power consumption and latency for certain workloads, for example audio workloads that submit inference every 10 ms. The VPU needs non zero time to enter IDLE state after responding to D0i3 entry message. If the driver does not wait for the VPU to enter IDLE state it could cause warm boot failures. Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-12-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu/37xx: Print warning when VPUIP is not idle during power downStanislaw Gruszka
Print warning if VPUIP is not idle during power down. Use warn log level also when we fail to enter reset state as this is not really an error but unexpected behavior. Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-11-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Introduce ivpu_ipc_send_receive_active()Karol Wachowski
Split ivpu_ipc_send_receive() implementation to have a version that does not call pm_runtime_resume_and_get(). That implementation can be invoked when device is up and runtime resume is prohibited (for example at the end of boot sequence). The new function will be used for D0i3 entry IPC message addition in the separate change. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-10-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Pass D0i3 residency time to the VPU firmwareAndrzej Kacprowski
The firmware needs to know the time spent in D0i3/D3 to calculate telemetry data. The D0i3/D3 residency time is calculated by the driver and passed to the firmware in the boot parameters. The driver also passes VPU perf counter value captured right before entering D0i3 - this allows the VPU firmware to generate monotonic timestamps for the logs. Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-9-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu/40xx: Capture D0i3 entry host and device timestampsAndrzej Kacprowski
The driver needs to capture the D0i3 entry timestamp to calculate D0i3 residency time. The D0i3 residency time and the VPU timestamp are passed to the firmware at D0i3 exit (warm boot). Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-8-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Change test_mode module param to bitmaskKarol Wachowski
Change meaning of test_mode module parameter from integer value to bitmask allowing setting different test features with corresponding bits. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-7-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Add support for VPU_JOB_FLAGS_NULL_SUBMISSION_MASKAndrzej Kacprowski
Add test_mode = 3 that add VPU_JOB_FLAGS_NULL_SUBMISSION_MASK flag to the job send to the VPU device. Then the VPU will process the job but won't execute commands (except the command to signal the fence). This can be used to estimate job processing overhead in the host software and VPU firmware. Unlike the null hardware mode, the null submission mode will still work even if UMD uses VPU fences to track job completion. Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-6-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Remove reset from power up sequenceKarol Wachowski
Setting a non-zero work point resets the IP hence IP_RESET trigger is redundant. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-5-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Add dvfs_mode file to debugfsTomasz Rusinowicz
Add new debugfs file to set dvfs_mode FW boot parameter and restart the FW to allow experimenting with DVFS (dynamic voltage & frequency scaling). Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-4-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Remove unneeded drm_driver declarationStanislaw Gruszka
Cleanup drm_driver declaration leftover. Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-3-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Update FW APIKrystian Pradzynski
Bump boot API to 4.20 Bump JSM API to 3.15 Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-2-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: avoid build failure with CONFIG_PM=nArnd Bergmann
The usage count of struct dev_pm_info is an implementation detail that is only available if CONFIG_PM is enabled, so printing it in a debug message causes a build failure in configurations without PM: In file included from include/linux/device.h:15, from include/linux/pci.h:37, from drivers/accel/ivpu/ivpu_pm.c:8: drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get_if_active': drivers/accel/ivpu/ivpu_pm.c:254:51: error: 'struct dev_pm_info' has no member named 'usage_count' 254 | atomic_read(&vdev->drm.dev->power.usage_count)); | ^ include/linux/dev_printk.h:129:48: note: in definition of macro 'dev_printk' 129 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \ | ^~~~~~~~~~~ drivers/accel/ivpu/ivpu_drv.h:75:17: note: in expansion of macro 'dev_dbg' 75 | dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args); \ | ^~~~~~~ drivers/accel/ivpu/ivpu_pm.c:253:9: note: in expansion of macro 'ivpu_dbg' 253 | ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n", | ^~~~~~~~ The print message does not seem essential, so the easiest workaround is to just remove it. Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231027152633.528490-1-arnd@kernel.org
2023-10-27accel/qaic: Support MHI QAIC_TIMESYNC channelPranjal Ramajor Asha Kanojiya
Use QAIC_TIMESYNC MHI channel to send UTC time to device in SBL environment. Remove support for QAIC_TIMESYNC MHI channel in AMSS environment as it is not used in that environment. Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231016170114.5446-3-quic_jhugo@quicinc.com
2023-10-27accel/qaic: Add support for periodic timesyncAjit Pal Singh
Device and Host have a time synchronization mechanism that happens once during boot when device is in SBL mode. After that, in mission-mode there is no timesync. In an experiment after continuous operation, device time drifted w.r.t. host by approximately 3 seconds per day. This drift leads to mismatch in timestamp of device and Host logs. To correct this implement periodic timesync in driver. This timesync is carried out via QAIC_TIMESYNC_PERIODIC MHI channel. Signed-off-by: Ajit Pal Singh <quic_ajitpals@quicinc.com> Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231016170114.5446-2-quic_jhugo@quicinc.com
2023-10-27accel/qaic: Enable 1 MSI fallback modeCarl Vanderlip
Several virtualization use-cases either don't support 32 MultiMSIs (Xen/VMware) or have significant drawbacks to their use (KVM's vIOMMU, which is required to support 32 MSI, needs to allocate an alternate system memory space for each device using vIOMMU (e.g. 8GB VM mem and 2 cards => 8 + 2 * 8 = 24GB host memory required)). Support these cases by enabling a 1 MSI fallback mode. Whenever all 32 MSIs requested are not available, a second request for a single MSI is made. Its success is the initiator of single MSI mode. This mode causes all interrupts generated by the device to be directed to the 0th MSI (firmware >=v1.10 will do this as a response to the PCIe MSI capability configuration). Likewise, all interrupt handlers for the device are registered to the 0th MSI. Since the DBC interrupt handler checks if the DBC is in use or if there is any pending changes, the 'spurious' interrupts are disregarded. If there is work to be done, the standard threaded IRQ handler is dispatched. On every interrupt, the MHI handler wakes up its threaded interrupt handler, and attempts to wake any waiters for MHI state events. Performance is within +-0.6% for test cases that typify real world use. Larger differences ([-4,+132]%, avg +47%) exist for very simple tasks (e.g. addition) compiled for single NSPs. It is assumed that the small work and many interrupts typically cause contention (e.g. 16 NSPs vs 4 CPUs), as evidenced by the standard deviation between runs also decreasing (r=-0.48 between delta(Performace_test) and delta(StdDev_test/Avg_test)) Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231016170036.5409-1-quic_jhugo@quicinc.com
2023-10-26accel/ivpu/37xx: Fix missing VPUIP interruptsKarol Wachowski
Move sequence of masking and unmasking global interrupts from buttress interrupt handler to generic one that handles both VPUIP and BTRS interrupts. Unmasking global interrupts will re-trigger MSI for any pending interrupts. Lack of this sequence will cause the driver to miss any VPUIP interrupt that comes after reading VPU_37XX_HOST_SS_ICB_STATUS_0 and before clearing all active interrupt sources. Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU") Cc: stable@vger.kernel.org Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231024161952.759914-1-stanislaw.gruszka@linux.intel.com
2023-10-23BackMerge tag 'v6.6-rc7' into drm-nextDave Airlie
This is needed to add the msm pr which is based on a higher base. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-10-23accel/ivpu: Delete the TODO fileDeepak R Varma
The work items listed in the TODO file of this driver file are either completed or dropped. The file is no more significant according to the maintainers. Hence removing it from the sources. Suggested-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Deepak R Varma <drv@mailo.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZTAucrOT69/tQK2o@runicha.com
2023-10-23accel/ivpu/37xx: Remove support for FPGA and simicsStanislaw Gruszka
We do not run 37xx VPU on non-silicon platforms any longer. Remove deprecated code to make it cleaner. Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-7-stanislaw.gruszka@linux.intel.com
2023-10-23accel/ivpu: Do not initialize parameters on power upStanislaw Gruszka
Initialize HW specific parameters only once. We do not have to do this on every power_up (performed during initialization and on resume). Move corresponding code to ->info_init() Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-6-stanislaw.gruszka@linux.intel.com
2023-10-23accel/ivpu: Print IPC type string instead of numberKrystian Pradzynski
Introduce ivpu_jsm_msg_type_to_str() helper to print type of IPC message. This will make reading logs and debugging IPC issues easier. Co-developed-by: Maciej Falkowski <maciej.falkowski@intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@intel.com> Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-5-stanislaw.gruszka@linux.intel.com
2023-10-23accel/ivpu: Read clock rate only if device is upKarol Wachowski
Do not unnecessarily wake up device to read clock rate. Return 0 as clk_rate if device is suspended. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-4-stanislaw.gruszka@linux.intel.com
2023-10-23accel/ivpu: Fix verbose version of REG_POLL macrosKrystian Pradzynski
Remove two out of four _POLL macros. For two remaining _POLL macros add message about polling register start and finish. Additionally avoid inconsequence when using REGV_WR/RD macros in MMU code - passing raw register offset instead of register name. Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-3-stanislaw.gruszka@linux.intel.com
2023-10-23accel/ivpu: Use ratelimited warn and err in IPC/JSMKrystian Pradzynski
Quite often during test corner cases IPC, JSM functions can flood dmesg with warn or err messages. With that lost dmesg history. Change warn, err to ratelimited versions in IPC, JSM to suppress dmesg spam occurrence during fail test scenarios. Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-2-stanislaw.gruszka@linux.intel.com
2023-10-19accel/ivpu: Extend address range for MMU mmapWludzik, Jozef
Allow to use whole address range in MMU context mmap which is up to 48 bits. Return invalid argument from MMU context mmap in case address is not aligned to MMU page size, address is below MMU page size or address is greater then 47 bits. This fixes problem disallowing to run large models on VPU4 Signed-off-by: Wludzik, Jozef <jozef.wludzik@intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231018110113.547208-1-stanislaw.gruszka@linux.intel.com
2023-10-19Revert "accel/ivpu: Use cached buffers for FW loading"Stanislaw Gruszka
This reverts commit 645d694559cab36fe6a57c717efcfa27d9321396. The commit cause issues with memory access from the device side. Switch back to write-combined memory mappings until the issues will be properly addressed. Add extra wmb() needed when boot_params->save_restore_ret_address() is modified. Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017121353.532466-1-stanislaw.gruszka@linux.intel.com
2023-10-19accel/ivpu: Don't enter d0i3 during FLRJacek Lawrynowicz
Avoid HW bug on some platforms where we enter D0i3 state and CPU is in low power states (C8 or above). Fixes: 852be13f3bd3 ("accel/ivpu: Add PM support") Cc: stable@vger.kernel.org Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231003064213.1527327-1-stanislaw.gruszka@linux.intel.com
2023-10-17Merge tag 'drm-habanalabs-next-2023-10-10' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next This tag contains habanalabs driver changes for v6.7. The notable changes are: - uAPI changes: - Expose tsc clock sampling to better sync clock information in profiler. - Enhance engine error reporting in the info ioctl. - Block access to the eventfd operations through the control device. - Disable the option of the user to register multiple times with the same offset for timestamp dump by the driver. If a user wants to use the same offset in the timestamp buffer for different interrupt, it needs to first de-register the offset. - When exporting dma-buf (for p2p), force the user to specify size/offset in multiples of PAGE_SIZE. This is instead of the driver doing the rounding to PAGE_SIZE, which has caused the driver to map more memory than was intended by the user. - New features and improvements: - Complete the move of the driver to the accel subsystem by removing the custom habanalabs class and major and registering to accel subsystem. - Move the firmware interface files to include/linux/habanalabs. This is a pre-requisite for upstreaming the NIC drivers of Gaudi (as they need to include those files). - Perform device hard-reset upon PCIe AXI drain event to prevent the failure from cascading to different IP blocks in the SoC. In secured environments, this is done automatically by the firmware. - Print device name when it is removed for better debuggability. - Add support for trace of dma map sgtable operations. - Optimize handling of user interrupts by splitting the interrupts to two lists. One list for fast handling and second list for handling with timestamp recording, which is slower. - Prevent double device hard-reset due to 2 adjacent H/W events. - Set device status 'malfunction' while in rmmod. - Firmware related fixes: - Extend preboot timeout because preboot loading might take longer than expected in certain cases. - Add a protection mechanism for the Event Queue. In case it is full, the firmware will be able to notify about it through a dedicated interrupt. - Perform device hard-reset in case scrubbing of memory has failed. - Bug fixes and code cleanups: - Small fixes of dma-buf handling in Gaudi2, such as handling an offset != 0, using the correct exported size, creation of sg table. - Fix spmu mask creation. - Fix bug in wait for cs completion for decoder workloads. - Cleanup Greco name from documentation. - Fix bug in recording timestamp during cs completion interrupt handling. - Fix CoreSight ETF configuration and flush logic. - Fix small bug in hpriv_list handling (the list that contains the private data per process that opens our device). Signed-off-by: Dave Airlie <airlied@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmUlHoQACgkQZR1NuKta # 54DsXQf8CW+W4iWJf5UDTj/E/giu9rVRrsUsU0hhCcXbecIxRsLObYXtulENu5/u # VuEAo/tAvo0LUKi8pdIv6ernDKaxZ1+fimlfXMCzllAA/ts3yp1NgunprsIsx3tv # YgcJ2GNR8UlVZ1qYuZl+4dOTyD0yfRMROUXBe7wqKnUXOEepOiLBxq6W15tZiJnx # L+V0yGkNk6pAoADIXLW9EgEXiN/bJZCXGPWp06i/Nz7cHIHJGoV59wAqftqllCtk # 8ZMkLByjlQKPhc5AgWBtKE8EGVip3sm7b/Q2Gq0ZXdZiebyVJ+AjuuDOdtq1UCIw # Rcp2576E7rByIBu3RAFlrioWhuR5Zw== # =2ien # -----END PGP SIGNATURE----- # gpg: Signature made Tue 10 Oct 2023 19:51:00 AEST # gpg: using RSA key ED311BA00042EF52DCB412C5651D4DB8AB5AE780 # gpg: Can't check signature: No public key From: Oded Gabbay <ogabbay@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/ZSUfiX4J7v4Wn0cU@ogabbay-vm-u22.habana-labs.com
2023-10-12accel/ivpu: Add ivpu_bo_vaddr() and ivpu_bo_size()Jacek Lawrynowicz
Use: - ivpu_bo_vaddr(bo) instead of bo->kvaddr - ivpu_bo_size(bo) instead of bo->base.size This is a preparation for switch to a drm_gem_shmem_object as a base for ivpu_bo, where: - bo->kvaddr becomes bo->base.vaddr - bo->base.size becomes bo->base.base.size Using ivpu_bo_vaddr() and ivpu_bo_size() increases the readability of the code. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-9-stanislaw.gruszka@linux.intel.com
2023-10-11Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Updating drm-misc-next to the state of Linux v6.6-rc2. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2023-10-09accel/habanalabs/gaudi2: fix spmu mask creationOded Gabbay
event_types_num received from the user can be 0. In that case, the event_mask should be 0. In addition, to create a correct mask we need to match the number of event types to the bit location such that bit 0 represents a single event type, bit 1 represents 2 types and so on. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-10-09accel/habanalabs/gaudi2: perform hard-reset upon PCIe AXI drain eventTomer Tayar
Non-completed transactions from PCIe towards the device are handled by the AXI drain mechanism. This handling is in the PCIe level, but the transactions are still there in the device consuming some queues entries, and therefore the device must be reset. Modify to perform hard-reset upon PCIe AXI drain events. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: fix bug in decoder wait for cs completionfarah kassabri
The decoder interrupts are handled in the interrupt context same as all user interrupts. In such case, the wait list should be protected by spin_lock_irqsave in order to avoid deadlock that might happen with the user submission flow. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: remove wrong doc for init_phys_pg_pack_from_userptrDafna Hirschfeld
The function does not pin the pages so remove that from the inline doc. Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: add missing debugfs function stubsArnd Bergmann
Two function stubs were removed in an earlier commit but are now needed again: drivers/accel/habanalabs/common/device.c: In function 'hl_device_init': drivers/accel/habanalabs/common/device.c:2231:14: error: implicit declaration of function 'hl_debugfs_device_init'; did you mean 'drm_debugfs_dev_init'? [-Werror=implicit-function-declaration] 2231 | rc = hl_debugfs_device_init(hdev); drivers/accel/habanalabs/common/device.c:2367:9: error: implicit declaration of function 'hl_debugfs_device_fini'; did you mean 'hl_debugfs_remove_file'? [-Werror=implicit-function-declaration] 2367 | hl_debugfs_device_fini(hdev); | ^~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: minor cosmetic update to habanalabs.hOded Gabbay
- Update copyright years - Align fields in struct hl_userptr - Fix comments Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-10-09accel/habanalabs/gaudi: remove define used for simulatorOded Gabbay
We don't support simulator in upstream. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-10-09accel/habanalabs: remove leftover codeOded Gabbay
This code was added as part of a bigger feature which was never upstreamed, so remove this code. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-10-09accel/habanalabs: print device name when it is removedOded Gabbay
Notifies the user which device was removed. It is important in a server with multiple devices. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-10-09accel/habanalabs: remove unused fieldOded Gabbay
flags in struct wait_interrupt_data is not used anywhere so remove it. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-10-09accel/habanalabs/gaudi: remove unused structure definitionOded Gabbay
struct gaudi_nic_status is not used anywhere in the code. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-10-09accel/habanalabs: trace dma map sgtableOhad Sharabi
Traces the DMA [un]map_sgtable using the new traces we added. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: remove unused asic functionsOded Gabbay
asic_dma_{un}map_single() asic-specific functions are no longer called from the common code, so delete these functions. In addition, delete the gaudi2 implementation as they are also not called. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-10-09accel/habanalabs: update boot status printAriel Suller
FW shutdown preparation status was added to spec. Signed-off-by: Ariel Suller <asuller@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-18 06:49:18 +0000