summaryrefslogtreecommitdiff
path: root/drivers/base/regmap
AgeCommit message (Collapse)Author
2020-09-01regmap: soundwire: remove unused header mod_devicetable.hVinod Koul
mod_devicetable.h does not seem to be required for this file, so remove it. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200829103939.4007097-1-vkoul@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-01regmap: Use flexible sleepDmitry Osipenko
The multi-reg write function uses udelay(), which is a busy-loop based delaying function that is not suitable for a long delays. Hence let's replace the udelay() with fsleep(), which is flexible sleep function that selects best delay function based on the delay-time. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200830185356.5365-3-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-26regmap: add Intel SPI Slave to AVMM Bus Bridge supportXu Yilun
This patch add support for regmap APIs that are intended to be used by the drivers of some SPI slave chips which integrate the "SPI slave to Avalon Master Bridge" (spi-avmm) IP. The spi-avmm IP acts as a bridge to convert encoded streams of bytes from the host to the chip's internal register read/write on Avalon bus. The driver implements the register read/write operations for a generic SPI master to access the sub devices behind spi-avmm bridge. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Reviewed-by: Tom Rix <trix@redhat.com> Reviewed-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com> Link: https://lore.kernel.org/r/1597822497-25107-2-git-send-email-yilun.xu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17Merge remote-tracking branch 'regmap/for-5.9' into regmap-nextMark Brown
2020-07-17Merge remote-tracking branch 'regmap/for-5.8' into regmap-linusMark Brown
2020-07-16regmap: debugfs: Don't sleep while atomic for fast_io regmapsDouglas Anderson
If a regmap has "fast_io" set then its lock function uses a spinlock. That doesn't work so well with the functions: * regmap_cache_only_write_file() * regmap_cache_bypass_write_file() Both of the above functions have the pattern: 1. Lock the regmap. 2. Call: debugfs_write_file_bool() copy_from_user() __might_fault() __might_sleep() Let's reorder things a bit so that we do all of our sleepable functions before we grab the lock. Fixes: d3dc5430d68f ("regmap: debugfs: Allow writes to cache state settings") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200715164611.1.I35b3533e8a80efde0cec1cc70f71e1e74b2fa0da@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-10regmap: Switch to use fwnode instead of OF oneAndy Shevchenko
Make regmap firmware node type agnostic by switching it to use fwnode. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200708161232.17914-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-08regmap: add missing dependency on SoundWirePierre-Louis Bossart
CONFIG_REGMAP is not selected when no other serial bus is supported. It's largely academic since CONFIG_I2C is usually selected e.g. by DRM, but still this can break randconfig so let's be explicit. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200707202628.113142-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-08Merge branch 'topic/devnode' of ↵Mark Brown
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into regmap-5.9
2020-07-08regmap-irq: use fwnode instead of device node in add_irq_chip()Michael Walle
Convert the argument to the newer fwnode_handle instead a device tree node. Fortunately, there are no users for now. So this is an easy change. Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20200706175353.16404-2-michael@walle.cc Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-03regmap: dev_get_regmap_match(): fix string comparisonMarc Kleine-Budde
This function is used by dev_get_regmap() to retrieve a regmap for the specified device. If the device has more than one regmap, the name parameter can be used to specify one. The code here uses a pointer comparison to check for equal strings. This however will probably always fail, as the regmap->name is allocated via kstrdup_const() from the regmap's config->name. Fix this by using strcmp() instead. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200703103315.267996-1-mkl@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-22Merge tag 'regmap-fix-v5.8-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fixes from Mark Brown: "A few small fixes, none of which are likely to have any substantial impact here - the most substantial one is a fix for a long standing memory leak on devices that use register patching which will only have an impact if the device is removed and re-added" * tag 'regmap-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Fix memory leak from regmap_register_patch regmap: fix the kerneldoc for regmap_test_bits() regmap: fix alignment issue
2020-06-17regmap: Fix memory leak from regmap_register_patchCharles Keepax
When a register patch is registered the reg_sequence is copied but the memory allocated is never freed. Add a kfree in regmap_exit to clean it up. Fixes: 22f0d90a3482 ("regmap: Support register patch sets") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200617152129.19655-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-15regmap: remove stray spaceBartosz Golaszewski
There are two spaces between arguments in regmap_fields_update_bits_base() so remove one. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20200615072507.11303-1-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-15Merge existing fixes from regmap/for-5.8Mark Brown
2020-06-08regmap: fix the kerneldoc for regmap_test_bits()Bartosz Golaszewski
The kerneldoc comment for regmap_test_bits() says that it returns -1 on regmap_read() failure. This is not true - it will propagate the error code returned by regmap_read(). Fix it. Fixes: aa2ff9dbaedd ("regmap: provide helpers for simple bit operations") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20200607093421.22209-1-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-01regmap: fix alignment issueJens Thoms Toerring
The assembly and disassembly of data to be sent to or received from a device invoke functions regmap_format_XX() and regmap_parse_XX() that extract or insert data items from or into a buffer, using assignments. In some cases the functions are called with a buffer pointer with an odd address. On architectures with strict alignment requirements this can result in a kernel crash. The assignments have been replaced by functions that take alignment into account. Signed-off-by: Jens Thoms Toerring <jt@toerring.de> Link: https://lore.kernel.org/r/20200531095300.GA27570@toerring.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29Merge remote-tracking branch 'regmap/for-5.8' into regmap-nextMark Brown
2020-05-29Merge series "regmap: provide simple bitops and use them in a driver" from ↵Mark Brown
Bartosz Golaszewski <brgl@bgdev.pl> Bartosz Golaszewski <bgolaszewski@baylibre.com>: From: Bartosz Golaszewski <bgolaszewski@baylibre.com> I noticed that oftentimes I use regmap_update_bits() for simple bit setting or clearing. In this case the fourth argument is superfluous as it's always 0 or equal to the mask argument. This series proposes to add simple bit operations for setting, clearing and testing specific bits with regmap. The second patch uses all three in a driver that got recently picked into the net-next tree. The patches obviously target different trees so - if you're ok with the change itself - I propose you pick the first one into your regmap tree for v5.8 and then I'll resend the second patch to add the first user for these macros for v5.9. v1 -> v2: - convert the new macros to static inline functions v2 -> v3: - drop unneeded ternary operator Bartosz Golaszewski (2): regmap: provide helpers for simple bit operations net: ethernet: mtk-star-emac: use regmap bitops drivers/base/regmap/regmap.c | 22 +++++ drivers/net/ethernet/mediatek/mtk_star_emac.c | 80 ++++++++----------- include/linux/regmap.h | 36 +++++++++ 3 files changed, 93 insertions(+), 45 deletions(-) base-commit: 8f3d9f354286745c751374f5f1fcafee6b3f3136 -- 2.26.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2020-05-29regmap: provide helpers for simple bit operationsBartosz Golaszewski
In many instances regmap_update_bits() is used for simple bit setting and clearing. In these cases the last argument is redundant and we can hide it with a static inline function. This adds three new helpers for simple bit operations: set_bits, clear_bits and test_bits (the last one defined as a regular function). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20200528154503.26304-2-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-24regmap-i2c: add 16-bit width registers supportAceLan Kao
This allows to access data with 16-bit width of registers via i2c SMBus block functions. The multi-command sequence of the reading function is not safe and may read the wrong data from other address if other commands are sent in-between the SMBus commands in the read function. Read performance: 32768 bytes (33 kB, 32 KiB) copied, 11.4869 s, 2.9 kB/s Write performance(with 1-byte page): 32768 bytes (33 kB, 32 KiB) copied, 129.591 s, 0.3 kB/s The implementation is inspired by below commit https://patchwork.ozlabs.org/patch/545292/ v2: add more descriptions about the issue that maybe introduced by this commit Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Link: https://lore.kernel.org/r/20200424123358.144850-1-acelan.kao@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-14Merge series "Add support for Kontron sl28cpld" from Michael Walle ↵Mark Brown
<michael@walle.cc>: The Kontron sl28cpld is a board management chip providing gpio, pwm, fan monitoring and an interrupt controller. For now this controller is used on the Kontron SMARC-sAL28 board. But because of its flexible nature, it might also be used on other boards in the future. The individual blocks (like gpio, pwm, etc) are kept intentionally small. The MFD core driver then instantiates different (or multiple of the same) blocks. It also provides the register layout so it might be updated in the future without a device tree change; and support other boards with a different layout or functionalities. See also [1] for more information. This is my first take of a MFD driver. I don't know whether the subsystem maintainers should only be CCed on the patches which affect the subsystem or on all patches for this series. I've chosen the latter so you can get a more complete picture. [1] https://lore.kernel.org/linux-devicetree/0e3e8204ab992d75aa07fc36af7e4ab2@walle.cc/ Changes since v1: - use of_match_table in all drivers, needed for automatic module loading, when using OF_MFD_CELL() - add new gpio-regmap.c which adds a generic regmap gpio_chip implemention - new patch for reqmap_irq, so we can reuse its implementation - remove almost any code from gpio-sl28cpld.c, instead use gpio-regmap and regmap-irq - change the handling of the mfd core vs device tree nodes; add a new property "of_reg" to the mfd_cell struct which, when set, is matched to the unit-address of the device tree nodes. - fix sl28cpld watchdog when it is not initialized by the bootloader. Explicitly set the operation mode. - also add support for kontron,assert-wdt-timeout-pin in sl28cpld-wdt. As suggested by Bartosz Golaszewski: - define registers as hex - make gpio enum uppercase - move parent regmap check before memory allocation - use device_property_read_bool() instead of the of_ version - mention the gpio flavors in the bindings documentation As suggested by Guenter Roeck: - cleanup #includes and sort them - use devm_watchdog_register_device() - use watchdog_stop_on_reboot() - provide a Documentation/hwmon/sl28cpld.rst - cleaned up the weird tristate->bool and I2C=y issue. Instead mention that the MFD driver is bool because of the following intc patch - removed the SL28CPLD_IRQ typo As suggested by Rob Herring: - combine all dt bindings docs into one patch - change the node name for all gpio flavors to "gpio" - removed the interrupts-extended rule - cleaned up the unit-address space, see above Michael Walle (16): include/linux/ioport.h: add helper to define REG resource constructs mfd: mfd-core: Don't overwrite the dma_mask of the child device mfd: mfd-core: match device tree node against reg property regmap-irq: make it possible to add irq_chip do a specific device node dt-bindings: mfd: Add bindings for sl28cpld mfd: Add support for Kontron sl28cpld management controller irqchip: add sl28cpld interrupt controller support watchdog: add support for sl28cpld watchdog pwm: add support for sl28cpld PWM controller gpio: add a reusable generic gpio_chip using regmap gpio: add support for the sl28cpld GPIO controller hwmon: add support for the sl28cpld hardware monitoring controller arm64: dts: freescale: sl28: enable sl28cpld arm64: dts: freescale: sl28: map GPIOs to input events arm64: dts: freescale: sl28: enable LED support arm64: dts: freescale: sl28: enable fan support .../bindings/gpio/kontron,sl28cpld-gpio.yaml | 51 +++ .../hwmon/kontron,sl28cpld-hwmon.yaml | 27 ++ .../bindings/mfd/kontron,sl28cpld.yaml | 162 +++++++++ .../bindings/pwm/kontron,sl28cpld-pwm.yaml | 35 ++ .../watchdog/kontron,sl28cpld-wdt.yaml | 35 ++ Documentation/hwmon/sl28cpld.rst | 36 ++ .../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 14 + .../fsl-ls1028a-kontron-sl28-var3-ads2.dts | 9 + .../freescale/fsl-ls1028a-kontron-sl28.dts | 124 +++++++ drivers/base/regmap/regmap-irq.c | 84 ++++- drivers/gpio/Kconfig | 15 + drivers/gpio/Makefile | 2 + drivers/gpio/gpio-regmap.c | 321 ++++++++++++++++++ drivers/gpio/gpio-sl28cpld.c | 187 ++++++++++ drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 + drivers/hwmon/sl28cpld-hwmon.c | 152 +++++++++ drivers/irqchip/Kconfig | 3 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-sl28cpld.c | 99 ++++++ drivers/mfd/Kconfig | 21 ++ drivers/mfd/Makefile | 2 + drivers/mfd/mfd-core.c | 31 +- drivers/mfd/sl28cpld.c | 154 +++++++++ drivers/pwm/Kconfig | 10 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-sl28cpld.c | 204 +++++++++++ drivers/watchdog/Kconfig | 11 + drivers/watchdog/Makefile | 1 + drivers/watchdog/sl28cpld_wdt.c | 242 +++++++++++++ include/linux/gpio-regmap.h | 88 +++++ include/linux/ioport.h | 5 + include/linux/mfd/core.h | 26 +- include/linux/regmap.h | 10 + 34 files changed, 2142 insertions(+), 32 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml create mode 100644 Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml create mode 100644 Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml create mode 100644 Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml create mode 100644 Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml create mode 100644 Documentation/hwmon/sl28cpld.rst create mode 100644 drivers/gpio/gpio-regmap.c create mode 100644 drivers/gpio/gpio-sl28cpld.c create mode 100644 drivers/hwmon/sl28cpld-hwmon.c create mode 100644 drivers/irqchip/irq-sl28cpld.c create mode 100644 drivers/mfd/sl28cpld.c create mode 100644 drivers/pwm/pwm-sl28cpld.c create mode 100644 drivers/watchdog/sl28cpld_wdt.c create mode 100644 include/linux/gpio-regmap.h -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2020-04-14regmap-irq: make it possible to add irq_chip do a specific device nodeMichael Walle
Add a new function regmap_add_irq_chip_np() with its corresponding devm_regmap_add_irq_chip_np() variant. Sometimes one want to register the IRQ domain on a different device node that the one of the regmap node. For example when using a MFD where there are different interrupt controllers and particularly for the generic regmap gpio_chip/irq_chip driver. In this case it is not desireable to have the IRQ domain on the parent node. Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20200402203656.27047-5-michael@walle.cc Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-14regmap: Add bus reg_update_bits() supportBaolin Wang
Add reg_update_bits() support in case some platforms use a special method to update bits of registers. Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/df32fd0529957d1e7e26ba1465723f16cfbe92c8.1586757922.git.baolin.wang7@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-13regmap: debugfs: check count when read regmap filePeng Fan
When executing the following command, we met kernel dump. dmesg -c > /dev/null; cd /sys; for i in `ls /sys/kernel/debug/regmap/* -d`; do echo "Checking regmap in $i"; cat $i/registers; done && grep -ri "0x02d0" *; It is because the count value is too big, and kmalloc fails. So add an upper bound check to allow max size `PAGE_SIZE << (MAX_ORDER - 1)`. Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1584064687-12964-1-git-send-email-peng.fan@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-21regmap: fix writes to non incrementing registersBen Whitten
When checking if a register block is writable we must ensure that the block does not start with or contain a non incrementing register. Fixes: 8b9f9d4dc511 ("regmap: verify if register is writeable before writing operations") Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Link: https://lore.kernel.org/r/20200118205625.14532-1-ben.whitten@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-06regmap-i2c: constify regmap_bus structuresMichał Mirosław
regmap_bus structures are not changed anywhere. Mark them const. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/85e4141348db00ecf1f2bc5c2ff6ba3de75e8ff4.1578134920.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-19regmap: regmap-w1: Drop unreachable codeMika Westerberg
Both init functions have a stray "return NULL" at the end which is never reached so drop them. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191119125837.47619-1-mika.westerberg@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-16Merge tag 'regmap-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "Only two changes for this release, one fix for error handling with runtime PM and a change from Greg removing error handling from debugfs API calls now that they implement user visible error reporting" * tag 'regmap-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap-irq: Correct error paths in regmap_irq_thread for pm_runtime regmap: no need to check return value of debugfs_create functions
2019-08-12Merge branch 'regmap-5.4' into regmap-nextMark Brown
2019-08-12regmap-irq: Correct error paths in regmap_irq_thread for pm_runtimeCharles Keepax
Some error paths in regmap_irq_thread put the pm_runtime others do not, there is no reason to leave the pm_runtime enabled in some cases so update those paths to also put the pm_runtime. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20190812092409.21593-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-09soundwire: fix regmap dependencies and align with other serial linksPierre-Louis Bossart
The existing code has a mixed select/depend usage which makes no sense. config SOUNDWIRE_BUS tristate select REGMAP_SOUNDWIRE config REGMAP_SOUNDWIRE tristate depends on SOUNDWIRE_BUS Let's remove one layer of Kconfig definitions and align with the solutions used by all other serial links. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190718230215.18675-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-01regmap: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. The debugfs core will warn if a file or directory can not be created, so there's no need to duplicate the warning, nor really do anything else. Cc: Mark Brown <broonie@kernel.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20190731132923.GA13829@kroah.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-04Merge branch 'regmap-5.3' into regmap-nextMark Brown
2019-07-04Merge branch 'regmap-5.2' into regmap-linusMark Brown
2019-07-04regmap: select CONFIG_REGMAP while REGMAP_SCCB is setYueHaibing
REGMAP_SCCB is selected by ov772x and ov9650 drivers, but CONFIG_REGMAP may not, so building will fails: rivers/media/i2c/ov772x.c: In function ov772x_probe: drivers/media/i2c/ov772x.c:1360:22: error: variable ov772x_regmap_config has initializer but incomplete type static const struct regmap_config ov772x_regmap_config = { ^~~~~~~~~~~~~ drivers/media/i2c/ov772x.c:1361:4: error: const struct regmap_config has no member named reg_bits Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 5bbf32217bf9 ("media: ov772x: use SCCB regmap") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190704093553.49904-1-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17regmap: lzo: Switch to bitmap_zalloc()Andy Shevchenko
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-12regmap: fix bulk writes on paged registersSrinivas Kandagatla
On buses like SlimBus and SoundWire which does not support gather_writes yet in regmap, A bulk write on paged register would be silently ignored after programming page. This is because local variable 'ret' value in regmap_raw_write_impl() gets reset to 0 once page register is written successfully and the code below checks for 'ret' value to be -ENOTSUPP before linearising the write buffer to send to bus->write(). Fix this by resetting the 'ret' value to -ENOTSUPP in cases where gather_writes() is not supported or single register write is not possible. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-07regmap: add i3c bus supportVitor Soares
Add basic support for i3c bus. This is a simple implementation that only give support for SDR Read and Write commands. Signed-off-by: Vitor Soares <vitor.soares@synopsys.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-20regmap: debugfs: Fix memory leak in regmap_debugfs_initDaniel Baluta
As detected by kmemleak running on i.MX6ULL board: nreferenced object 0xd8366600 (size 64): comm "swapper/0", pid 1, jiffies 4294937370 (age 933.220s) hex dump (first 32 bytes): 64 75 6d 6d 79 2d 69 6f 6d 75 78 63 2d 67 70 72 dummy-iomuxc-gpr 40 32 30 65 34 30 30 30 00 e3 f3 ab fe d1 1b dd @20e4000........ backtrace: [<b0402aec>] kasprintf+0x2c/0x54 [<a6fbad2c>] regmap_debugfs_init+0x7c/0x31c [<9c8d91fa>] __regmap_init+0xb5c/0xcf4 [<5b1c3d2a>] of_syscon_register+0x164/0x2c4 [<596a5d80>] syscon_node_to_regmap+0x64/0x90 [<49bd597b>] imx6ul_init_machine+0x34/0xa0 [<250a4dac>] customize_machine+0x1c/0x30 [<2d19fdaf>] do_one_initcall+0x7c/0x398 [<e6084469>] kernel_init_freeable+0x328/0x448 [<168c9101>] kernel_init+0x8/0x114 [<913268aa>] ret_from_fork+0x14/0x20 [<ce7b131a>] 0x0 Root cause is that map->debugfs_name is allocated using kasprintf and then the pointer is lost by assigning it other memory address. Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-25Merge branch 'regmap-5.2' into regmap-nextMark Brown
2019-04-25Merge branch 'regmap-5.1' into regmap-linusMark Brown
2019-04-25regmap: add proper SPDX identifiers on files that did not have them.Greg Kroah-Hartman
There were a few files in the regmap code that did not have SPDX identifiers on them, so fix that up. At the same time, remove the "free form" text that specified the license of the file, as that is impossible for any tool to properly parse. Also, as Mark loves // comment markers, convert all of the headers to be the same to make things look consistent :) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-03regmap: verify if register is writeable before writing operationsHan Nandor
regmap provides a couple of ways to validate the register range used. a) maxim allowed register, b) writable/readable register tables, c) callback function that can be provided by the driver to validate a register. regmap framework should verify if registers are writeable before every write operation. However this doesn't seems to happen in every situation. The method `_regmap_raw_write_impl` is only using the `writeable_reg` callback to verify if register is writeable, ignoring the other two. This can lead to undefined behaviour since this allows to write to registers that could be declared un-writeable by using any other option. Change `_regmap_raw_write_impl` to use the `regmap_writeable` method to verify if registers are writable before the write operation. Signed-off-by: Nandor Han <nandor.han@vaisala.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-01regmap: regmap-irq: fix getting type default valuesSrinivas Kandagatla
Checking for value of type default value just after allocating will always be zero and the type register default values will never be read, so fix this! Without this patch setting irq type will be silently ignored. Patch "regmap: regmap-irq: Remove default irq type setting from core" did remove the default mask but it forgot to remove the check before reading the default type register. Fixes: 84267d1b18ab ("regmap: regmap-irq: Remove default irq type setting from core") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-20regmap: debugfs: Jump to the next readable registerLucas Tanure
Improve the speed of the loop jumping to the next available register Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-19regmap: debugfs: Replace code by already existing functionLucas Tanure
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-29Merge remote-tracking branch 'regmap/topic/irq' into regmap-nextMark Brown
2019-01-29Merge branch 'regmap-5.1' into regmap-nextMark Brown
2019-01-29regmap: Remove attribute packed from struct 'regcache_rbtree_node'Mathieu Malaterre
On one hand commit 28644c809f44 ("regmap: Add the rbtree cache support") added 'regcache_rbtree_node' as packed structure, while on the other hand commit e977145aeaad ("[RBTREE] Add explicit alignment to sizeof(long) for struct rb_node.") declared struct 'rb_node' as aligned. Solve the ambiguity of placing aligned structure in a packed one by removing the packed attribute from struct. This seems to be the behavior of gcc anyway. This removes the following warning (W=1): drivers/base/regmap/regcache-rbtree.c:36:1: warning: alignment 1 of 'struct regcache_rbtree_node' is less than 4 [-Wpacked-not-aligned] Cc: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-18 19:18:58 +0000