| Age | Commit message (Collapse) | Author |
|---|
|
In order to support bus fabric clock frequency changed on the fly,
need to update some bus clocks'flags to make sure these clocks'frequency
and parent can be changed on the fly. For these clocks, HW can make sure
no glitch will be introduced when changing on the fly.
In order to support DDR DFS, the HW register bit for DDR_SEL
and DDR_DIV clock will be modified by TF-A. So need to update
these two clock's flag to make sure that the linux kernel side
can correct these clocks' SW state to reflect the actual HW state.
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230331063814.2462059-6-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
The TPM5 is used for broadcast timer purpose and registered
with TIMER_OF_DECLARE. As the clock driver is not ready at
that stage, so the TPM5 clock is configured in bootloader(TF-A).
if we just remove the TPM5 clock from linux will introduce a
risk that the TPM5's parent clock will be gated, then lead to
TPM's channel control config can NOT be written into register
successfully.
Due to the above reason, we still need to add the TPM5 clock
into linux clock but register it as a simple critical gate
clock to make sure its parent is always on.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230331063814.2462059-5-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
Keep the A35<->M33 MU0_B clock enabled always for low power
communication.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230331063814.2462059-4-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
If a divider's parent clock has fractional part, it will hard to round out a
more accurate clock rate for this divider, add the 'CLK_DIVIDER_ROUND_CLOSEST' flags
for such divider to get a more accurate clock rate.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230331063814.2462059-3-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
XBAR_DIVBUS and AD_SLOW should set parent to XBAR_AD_DIVPLAT and
XBAR_DIVBUS respectively, not the NIC_AD. otherwise we will get
wrong clock rate.
Fixes: c43a801a5789 ("clk: imx: Add clock driver for imx8ulp")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230331063814.2462059-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
The clk count has been get with of_clk_get_parent_count, there is
no need to pass clk_count from users.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230104110032.1220721-4-peng.fan@oss.nxp.com
|
|
The clock driver is registered as platform devices and
it is possible to reloading the driver at runtime.
But actually the clocks should never be removed to make system work,
attempting to bind again would result in a crash, because almost all
devices depends on clock to function well.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20211022131513.17381-1-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
|
|
On i.MX8ULP, for some of the PCCs, it has a peripheral SW RST bit
resides in the same registers as the clock controller. So add this
SW RST controller support alongs with the pcc clock initialization.
the reset and clock shared the same register, to avoid accessing
the same register by reset control and clock control concurrently,
locking is necessary, so reuse the imx_ccm_lock spinlock to simplify
the code.
Suggested-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20210914065208.3582128-10-ping.bai@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
|
|
Add clock driver for i.MX8ULP.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20210914065208.3582128-9-ping.bai@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
|
