Age | Commit message (Collapse) | Author |
|
The EFI stub random allocator used for kaslr on arm64 has a subtle
bug. In function get_entry_num_slots() which counts the number of
possible allocation "slots" for the image in a given chunk of free
EFI memory, "last_slot" can become negative if the chunk is smaller
than the requested allocation size.
The test "if (first_slot > last_slot)" doesn't catch it because
both first_slot and last_slot are unsigned.
I chose not to make them signed to avoid problems if this is ever
used on architectures where there are meaningful addresses with the
top bit set. Instead, fix it with an additional test against the
allocation size.
This can cause a boot failure in addition to a loss of randomisation
due to another bug in the arm64 stub fixed separately.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Fixes: 2ddbfc81eac8 ("efi: stub: add implementation of efi_random_alloc()")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The soft_limit and hard_limit in the function efi_load_initrd describes
the preferred and max address of initrd loading location respectively.
However, the description wrongly describes it as the size of the
allocated memory.
Fix the function description.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
If the buffer has slashes up to the end then this will read past the end
of the array. I don't anticipate that this is an issue for many people
in real life, but it's the right thing to do and it makes static
checkers happy.
Fixes: 7a88a6227dc7 ("efi/libstub: Fix path separator regression")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
When cross compiling x86 on an ARM machine with clang, there are several
errors along the lines of:
arch/x86/include/asm/page_64.h:52:7: error: invalid output constraint '=D' in asm
This happens because the x86 flags in the EFI stub are not derived from
KBUILD_CFLAGS like the other architectures are and the clang flags that
set the target architecture ('--target=') and the path to the GNU cross
tools ('--prefix=') are not present, meaning that the host architecture
is targeted.
These flags are available as $(CLANG_FLAGS) from the main Makefile so
add them to the cflags for x86 so that cross compiling works as expected.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20210326000435.4785-4-nathan@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Ard Biesheuvel via Borislav Petkov:
"Fix an oversight in the handling of EFI_RT_PROPERTIES_TABLE, which was
added v5.10, but failed to take the SetVirtualAddressMap() RT service
into account"
* tag 'efi-urgent-for-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: stub: omit SetVirtualAddressMap() if marked unsupported in RT_PROP table
|
|
As per ARM ARM DDI 0487G.a, when FEAT_LPA2 is implemented, ID_AA64MMFR0_EL1
might contain a range of values to describe supported translation granules
(4K and 16K pages sizes in particular) instead of just enabled or disabled
values. This changes __enable_mmu() function to handle complete acceptable
range of values (depending on whether the field is signed or unsigned) now
represented with ID_AA64MMFR0_TGRAN_SUPPORTED_[MIN..MAX] pair. While here,
also fix similar situations in EFI stub and KVM as well.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-efi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1615355590-21102-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The EFI_RT_PROPERTIES_TABLE contains a mask of runtime services that are
available after ExitBootServices(). This mostly does not concern the EFI
stub at all, given that it runs before that. However, there is one call
that is made at runtime, which is the call to SetVirtualAddressMap()
(which is not even callable at boot time to begin with)
So add the missing handling of the RT_PROP table to ensure that we only
call SetVirtualAddressMap() if it is not being advertised as unsupported
by the firmware.
Cc: <stable@vger.kernel.org> # v5.10+
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull clang LTO updates from Kees Cook:
"Clang Link Time Optimization.
This is built on the work done preparing for LTO by arm64 folks,
tracing folks, etc. This includes the core changes as well as the
remaining pieces for arm64 (LTO has been the default build method on
Android for about 3 years now, as it is the prerequisite for the
Control Flow Integrity protections).
While x86 LTO enablement is done, it depends on some pending objtool
clean-ups. It's possible that I'll send a "part 2" pull request for
LTO that includes x86 support.
For merge log posterity, and as detailed in commit dc5723b02e52
("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO
build:
make LLVM=1 LLVM_IAS=1 defconfig
scripts/config -e LTO_CLANG_THIN
make LLVM=1 LLVM_IAS=1
(To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-"
and "ARCH=arm64" to the "make" command lines.)
Summary:
- Clang LTO build infrastructure and arm64-specific enablement (Sami
Tolvanen)
- Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)"
* tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds
arm64: allow LTO to be selected
arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS
arm64: vdso: disable LTO
drivers/misc/lkdtm: disable LTO for rodata.o
efi/libstub: disable LTO
scripts/mod: disable LTO for empty.c
modpost: lto: strip .lto from module names
PCI: Fix PREL32 relocations for LTO
init: lto: fix PREL32 relocations
init: lto: ensure initcall ordering
kbuild: lto: add a default list of used symbols
kbuild: lto: merge module sections
kbuild: lto: limit inlining
kbuild: lto: fix module versioning
kbuild: add support for Clang LTO
tracing: move function tracer options to Kconfig
|
|
Currently the EFI stub prints a diagnostic on boot saying that KASLR will
be disabled if it is unable to use the EFI RNG protocol to obtain a seed
for KASLR. With the addition of support for v8.5-RNG and the SMCCC RNG
protocol it is now possible for KASLR to obtain entropy even if the EFI
RNG protocol is unsupported in the system, and the main kernel now
explicitly says if KASLR is active itself. This can result in a boot
log where the stub says KASLR has been disabled and the main kernel says
that it is enabled which is confusing for users.
Remove the explicit reference to KASLR from the diagnostics, the warnings
are still useful as EFI is the only source of entropy the stub uses when
randomizing the physical address of the kernel and the other sources may
not be available.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210120163810.14973-1-broonie@kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Move TPM related definitions that are only used in the EFI stub into
efistub.h, which is a local header.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
efi_tcg2_protocol::get_event_log() takes a protocol pointer as the
first argument, not a EFI handle.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
With CONFIG_LTO_CLANG, we produce LLVM bitcode instead of ELF object
files. Since LTO is not really needed here and the Makefile assumes we
produce an object file, disable LTO for libstub.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-13-samitolvanen@google.com
|
|
Now that ARM started following the example of arm64 and RISC-V, and
no longer imposes any restrictions on the placement of the FDT in
memory at boot, we no longer need per-arch implementations of
efi_get_max_fdt_addr() to factor out the differences. So get rid of
it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Link: https://lore.kernel.org/r/20201029134901.9773-1-ardb@kernel.org
|
|
Now that we have a static inline helper to discover the platform's secure
boot mode that can be shared between the EFI stub and the kernel proper,
switch to it, and drop some comments about keeping them in sync manually.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Generalize the efi_get_secureboot() function so not only efistub but also
other subsystems can use it.
Note that the MokSbState handling is not factored out: the variable is
boot time only, and so it cannot be parameterized as easily. Also, the
IMA code will switch to this version in a future patch, and it does not
incorporate the MokSbState exception in the first place.
Note that the new efi_get_secureboot_mode() helper treats any failures
to read SetupMode as setup mode being disabled.
Co-developed-by: Chester Lin <clin@suse.com>
Signed-off-by: Chester Lin <clin@suse.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The image_size argument to efi_relocate_kernel() is currently specified
as init_size, but this is unnecessarily large. The compressed kernel is
much smaller, in fact, its image only extends up to the start of _bss,
since at this point, the .bss section is still uninitialized.
Depending on compression level, this can reduce the amount of data
copied by 4-5x.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20201011142012.96493-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"A handful of cleanups and new features:
- A handful of cleanups for our page fault handling
- Improvements to how we fill out cacheinfo
- Support for EFI-based systems"
* tag 'riscv-for-linus-5.10-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (22 commits)
RISC-V: Add page table dump support for uefi
RISC-V: Add EFI runtime services
RISC-V: Add EFI stub support.
RISC-V: Add PE/COFF header for EFI stub
RISC-V: Implement late mapping page table allocation functions
RISC-V: Add early ioremap support
RISC-V: Move DT mapping outof fixmap
RISC-V: Fix duplicate included thread_info.h
riscv/mm/fault: Set FAULT_FLAG_INSTRUCTION flag in do_page_fault()
riscv/mm/fault: Fix inline placement in vmalloc_fault() declaration
riscv: Add cache information in AUX vector
riscv: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
riscv: Set more data to cacheinfo
riscv/mm/fault: Move access error check to function
riscv/mm/fault: Move FAULT_FLAG_WRITE handling in do_page_fault()
riscv/mm/fault: Simplify mm_fault_error()
riscv/mm/fault: Move fault error handling to mm_fault_error()
riscv/mm/fault: Simplify fault error handling
riscv/mm/fault: Move vmalloc fault handling to vmalloc_fault()
riscv/mm/fault: Move bad area handling to bad_area()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull orphan section checking from Ingo Molnar:
"Orphan link sections were a long-standing source of obscure bugs,
because the heuristics that various linkers & compilers use to handle
them (include these bits into the output image vs discarding them
silently) are both highly idiosyncratic and also version dependent.
Instead of this historically problematic mess, this tree by Kees Cook
(et al) adds build time asserts and build time warnings if there's any
orphan section in the kernel or if a section is not sized as expected.
And because we relied on so many silent assumptions in this area, fix
a metric ton of dependencies and some outright bugs related to this,
before we can finally enable the checks on the x86, ARM and ARM64
platforms"
* tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/boot/compressed: Warn on orphan section placement
x86/build: Warn on orphan section placement
arm/boot: Warn on orphan section placement
arm/build: Warn on orphan section placement
arm64/build: Warn on orphan section placement
x86/boot/compressed: Add missing debugging sections to output
x86/boot/compressed: Remove, discard, or assert for unwanted sections
x86/boot/compressed: Reorganize zero-size section asserts
x86/build: Add asserts for unwanted sections
x86/build: Enforce an empty .got.plt section
x86/asm: Avoid generating unused kprobe sections
arm/boot: Handle all sections explicitly
arm/build: Assert for unwanted sections
arm/build: Add missing sections
arm/build: Explicitly keep .ARM.attributes sections
arm/build: Refactor linker script headers
arm64/build: Assert for unwanted sections
arm64/build: Add missing DWARF sections
arm64/build: Use common DISCARDS in linker script
arm64/build: Remove .eh_frame* sections due to unwind tables
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI changes from Ingo Molnar:
- Preliminary RISC-V enablement - the bulk of it will arrive via the
RISCV tree.
- Relax decompressed image placement rules for 32-bit ARM
- Add support for passing MOK certificate table contents via a config
table rather than a EFI variable.
- Add support for 18 bit DIMM row IDs in the CPER records.
- Work around broken Dell firmware that passes the entire Boot####
variable contents as the command line
- Add definition of the EFI_MEMORY_CPU_CRYPTO memory attribute so we
can identify it in the memory map listings.
- Don't abort the boot on arm64 if the EFI RNG protocol is available
but returns with an error
- Replace slashes with exclamation marks in efivarfs file names
- Split efi-pstore from the deprecated efivars sysfs code, so we can
disable the latter on !x86.
- Misc fixes, cleanups and updates.
* tag 'efi-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
efi: mokvar: add missing include of asm/early_ioremap.h
efi: efivars: limit availability to X86 builds
efi: remove some false dependencies on CONFIG_EFI_VARS
efi: gsmi: fix false dependency on CONFIG_EFI_VARS
efi: efivars: un-export efivars_sysfs_init()
efi: pstore: move workqueue handling out of efivars
efi: pstore: disentangle from deprecated efivars module
efi: mokvar-table: fix some issues in new code
efi/arm64: libstub: Deal gracefully with EFI_RNG_PROTOCOL failure
efivarfs: Replace invalid slashes with exclamation marks in dentries.
efi: Delete deprecated parameter comments
efi/libstub: Fix missing-prototypes in string.c
efi: Add definition of EFI_MEMORY_CPU_CRYPTO and ability to report it
cper,edac,efi: Memory Error Record: bank group/address and chip id
edac,ghes,cper: Add Row Extension to Memory Error Record
efi/x86: Add a quirk to support command line arguments on Dell EFI firmware
efi/libstub: Add efi_warn and *_once logging helpers
integrity: Load certs from the EFI MOK config table
integrity: Move import of MokListRT certs to a separate routine
efi: Support for MOK variable config table
...
|
|
These fixes missed the v5.9 merge window, pick them up for early v5.10 merge.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch adds EFI runtime service support for RISC-V.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
[ardb: - Remove the page check]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Add a RISC-V architecture specific stub code that actually copies the
actual kernel image to a valid address and jump to it after boot services
are terminated. Enable UEFI related kernel configs as well for RISC-V.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Link: https://lore.kernel.org/r/20200421033336.9663-4-atish.patra@wdc.com
[ardb: - move hartid fetch into check_platform_features()
- use image_size not reserve_size
- select ISA_C
- do not use dram_base]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/efi/efi into for-next
Stable branch for v5.10 shared between the EFI and RISC-V trees
The RISC-V EFI boot and runtime support will be merged for v5.10 via
the RISC-V tree. However, it incorporates some changes that conflict
with other EFI changes that are in flight, so this tag serves as a
shared base that allows those conflicts to be resolved beforehand.
* tag 'efi-riscv-shared-for-v5.10' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/libstub: arm32: Use low allocation for the uncompressed kernel
efi/libstub: Export efi_low_alloc_above() to other units
efi/libstub: arm32: Base FDT and initrd placement on image address
efi: Rename arm-init to efi-init common for all arch
include: pe.h: Add RISC-V related PE definition
|
|
Currently, on arm64, we abort on any failure from efi_get_random_bytes()
other than EFI_NOT_FOUND when it comes to setting the physical seed for
KASLR, but ignore such failures when obtaining the seed for virtual
KASLR or for early seeding of the kernel's entropy pool via the config
table. This is inconsistent, and may lead to unexpected boot failures.
So let's permit any failure for the physical seed, and simply report
the error code if it does not equal EFI_NOT_FOUND.
Cc: <stable@vger.kernel.org> # v5.8+
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Fix the following warnings.
drivers/firmware/efi/libstub/string.c:83:20: warning: no previous
prototype for ‘simple_strtoull’ [-Wmissing-prototypes]
drivers/firmware/efi/libstub/string.c:108:6: warning: no previous
prototype for ‘simple_strtol’ [-Wmissing-prototypes]
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1600653203-57909-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
At least some versions of Dell EFI firmware pass the entire
EFI_LOAD_OPTION descriptor, rather than just the OptionalData part, to
the loaded image. This was verified with firmware revision 2.15.0 on a
Dell Precision T3620 by Jacobo Pantoja.
To handle this, add a quirk to check if the options look like a valid
EFI_LOAD_OPTION descriptor, and if so, use the OptionalData part as the
command line.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reported-by: Jacobo Pantoja <jacobopantoja@gmail.com>
Link: https://lore.kernel.org/linux-efi/20200907170021.GA2284449@rani.riverdale.lan/
Link: https://lore.kernel.org/r/20200914213535.933454-2-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Before commit
d0f9ca9be11f25ef ("ARM: decompressor: run decompressor in place if loaded via UEFI")
we were rather limited in the choice of base address for the uncompressed
kernel, as we were relying on the logic in the decompressor that blindly
rounds down the decompressor execution address to the next multiple of 128
MiB, and decompresses the kernel there. For this reason, we have a lot of
complicated memory region handling code, to ensure that this memory window
is available, even though it could be occupied by reserved regions or
other allocations that may or may not collide with the uncompressed image.
Today, we simply pass the target address for the decompressed image to the
decompressor directly, and so we can choose a suitable window just by
finding a 16 MiB aligned region, while taking TEXT_OFFSET and the region
for the swapper page tables into account.
So let's get rid of the complicated logic, and instead, use the existing
bottom up allocation routine to allocate a suitable window as low as
possible, and carve out a memory region that has the right properties.
Note that this removes any dependencies on the 'dram_base' argument to
handle_kernel_image(), and so this is removed as well. Given that this
was the only remaining use of dram_base, the code that produces it is
removed entirely as well.
Reviewed-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Tested-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Permit arm32-stub.c to access efi_low_alloc_above() in a subsequent
patch by giving it external linkage and declaring it in efistub.h.
Reviewed-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Tested-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add an efi_warn logging helper for warnings, and implement an analog of
printk_once for once-only logging.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200914213535.933454-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The way we use the base of DRAM in the EFI stub is problematic as it
is ill defined what the base of DRAM actually means. There are some
restrictions on the placement of FDT and initrd which are defined in
terms of dram_base, but given that the placement of the kernel in
memory is what defines these boundaries (as on ARM, this is where the
linear region starts), it is better to use the image address in these
cases, and disregard dram_base altogether.
Reviewed-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Tested-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Fix the warning below.
efi/libstub/vsprintf.c:135:2-3: Unneeded semicolon
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/1599633872-36784-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
TEXT_OFFSET serves no purpose, and for this reason, it was redefined
as 0x0 in the v5.8 timeframe. Since this does not appear to have caused
any issues that require us to revisit that decision, let's get rid of the
macro entirely, along with any references to it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200825135440.11288-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In preparation for adding --orphan-handling=warn to more architectures,
disable -mbranch-protection, as EFI does not yet support it[1]. This was
noticed due to it producing unwanted .note.gnu.property sections (prefixed
with .init due to the objcopy build step).
However, we must also work around a bug in Clang where the section is
still emitted for code-less object files[2], so also remove the section
during the objcopy.
[1] https://lore.kernel.org/lkml/CAMj1kXHck12juGi=E=P4hWP_8vQhQ+-x3vBMc3TGeRWdQ-XkxQ@mail.gmail.com
[2] https://bugs.llvm.org/show_bug.cgi?id=46480
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200821194310.3089815-8-keescook@chromium.org
|
|
Make the command line parsing more robust, by handling the case it is
not NUL-terminated.
Use strnlen instead of strlen, and make sure that the temporary copy is
NUL-terminated before parsing.
Cc: <stable@vger.kernel.org>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200813185811.554051-4-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Treat a NULL cmdline the same as empty. Although this is unlikely to
happen in practice, the x86 kernel entry does check for NULL cmdline and
handles it, so do it here as well.
Cc: <stable@vger.kernel.org>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200729193300.598448-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Arguments after "--" are arguments for init, not for the kernel.
Cc: <stable@vger.kernel.org>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200725155916.1376773-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Eliminate all GOT entries in the decompressor binary, by forcing hidden
visibility for all symbol references, which informs the compiler that
such references will be resolved at link time without the need for
allocating GOT entries.
To ensure that no GOT entries will creep back in, add an assertion to
the decompressor linker script that will fire if the .got section has
a non-zero size.
[Arvind: move hidden.h to include/linux instead of making a copy]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200731230820.1742553-3-keescook@chromium.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
* tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
kbuild: introduce hostprogs-always-y and userprogs-always-y
kbuild: sort hostprogs before passing it to ifneq
kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
kbuild: Replace HTTP links with HTTPS ones
kbuild: trace functions in subdirectories of lib/
kbuild: introduce ccflags-remove-y and asflags-remove-y
kbuild: do not export LDFLAGS_vmlinux
kbuild: always create directories of targets
powerpc/boot: add DTB to 'targets'
kbuild: buildtar: add dtbs support
kbuild: remove cc-option test of -ffreestanding
kbuild: remove cc-option test of -fno-stack-protector
Revert "kbuild: Create directory for target DTB"
kbuild: run the checker after the compiler
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull EFI fixes from Ingo Molnar:
"Various EFI fixes:
- Fix the layering violation in the use of the EFI runtime services
availability mask in users of the 'efivars' abstraction
- Revert build fix for GCC v4.8 which is no longer supported
- Clean up some x86 EFI stub details, some of which are borderline
bugs that copy around garbage into padding fields - let's fix these
out of caution.
- Fix build issues while working on RISC-V support
- Avoid --whole-archive when linking the stub on arm64"
* tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Revert "efi/x86: Fix build with gcc 4"
efi/efivars: Expose RT service availability via efivars abstraction
efi/libstub: Move the function prototypes to header file
efi/libstub: Fix gcc error around __umoddi3 for 32 bit builds
efi/libstub/arm64: link stub lib.a conditionally
efi/x86: Only copy upto the end of setup_header
efi/x86: Remove unused variables
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux into master
Pull arm64 fixes from Will Deacon:
"A batch of arm64 fixes.
Although the diffstat is a bit larger than we'd usually have at this
stage, a decent amount of it is the addition of comments describing
our syscall tracing behaviour, and also a sweep across all the modular
arm64 PMU drivers to make them rebust against unloading and unbinding.
There are a couple of minor things kicking around at the moment (CPU
errata and module PLTs for very large modules), but I'm not expecting
any significant changes now for us in 5.8.
- Fix kernel text addresses for relocatable images booting using EFI
and with KASLR disabled so that they match the vmlinux ELF binary.
- Fix unloading and unbinding of PMU driver modules.
- Fix generic mmiowb() when writeX() is called from preemptible
context (reported by the riscv folks).
- Fix ptrace hardware single-step interactions with signal handlers,
system calls and reverse debugging.
- Fix reporting of 64-bit x0 register for 32-bit tasks via
'perf_regs'.
- Add comments describing syscall entry/exit tracing ABI"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
drivers/perf: Prevent forced unbinding of PMU drivers
asm-generic/mmiowb: Allow mmiowb_set_pending() when preemptible()
arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP
arm64: ptrace: Use NO_SYSCALL instead of -1 in syscall_trace_enter()
arm64: syscall: Expand the comment about ptrace and syscall(-1)
arm64: ptrace: Add a comment describing our syscall entry/exit trap ABI
arm64: compat: Ensure upper 32 bits of x0 are zero on syscall return
arm64: ptrace: Override SPSR.SS when single-stepping is enabled
arm64: ptrace: Consistently use pseudo-singlestep exceptions
drivers/perf: Fix kernel panic when rmmod PMU modules during perf sampling
efi/libstub/arm64: Retain 2MB kernel Image alignment if !KASLR
|
|
Since commit 82046702e288 ("efi/libstub/arm64: Replace 'preferred' offset
with alignment check"), loading a relocatable arm64 kernel at a physical
address which is not 2MB aligned and subsequently booting with EFI will
leave the Image in-place, relying on the kernel to relocate itself early
during boot. In conjunction with commit dd4bc6076587 ("arm64: warn on
incorrect placement of the kernel by the bootloader"), which enables
CONFIG_RELOCATABLE by default, this effectively means that entering an
arm64 kernel loaded at an alignment smaller than 2MB with EFI (e.g. using
QEMU) will result in silent relocation at runtime.
Unfortunately, this has a subtle but confusing affect for developers
trying to inspect the PC value during a crash and comparing it to the
symbol addresses in vmlinux using tools such as 'nm' or 'addr2line';
all text addresses will be displaced by a sub-2MB offset, resulting in
the wrong symbol being identified in many cases. Passing "nokaslr" on
the command line or disabling "CONFIG_RANDOMIZE_BASE" does not help,
since the EFI stub only copies the kernel Image to a 2MB boundary if it
is not relocatable.
Adjust the EFI stub for arm64 so that the minimum Image alignment is 2MB
unless KASLR is in use.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: David Brazdil <dbrazdil@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This reverts commit 5435f73d5c4a1b75, which is no longer needed now
that the minimum GCC version has been bumped to v4.9
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The prototype of the functions handle_kernel_image & efi_enter_kernel
are defined in efi-stub.c which may result in a compiler warnings if
-Wmissing-prototypes is set in gcc compiler.
Move the prototype to efistub.h to make the compiler happy.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Link: https://lore.kernel.org/r/20200706172609.25965-2-atish.patra@wdc.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
32bit gcc doesn't support modulo operation on 64 bit data. It results in
a __umoddi3 error while building EFI for 32 bit.
Use bitwise operations instead of modulo operations to fix the issue.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Link: https://lore.kernel.org/r/20200625234516.31406-2-atish.patra@wdc.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Some Makefiles already pass -ffreestanding unconditionally.
For example, arch/arm64/lib/Makefile, arch/x86/purgatory/Makefile.
No problem report so far about hard-coding this option. So, we can
assume all supported compilers know -ffreestanding.
I confirmed GCC 4.8 and Clang manuals document this option.
Get rid of cc-option from -ffreestanding.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Some Makefiles already pass -fno-stack-protector unconditionally.
For example, arch/arm64/kernel/vdso/Makefile, arch/x86/xen/Makefile.
No problem report so far about hard-coding this option. So, we can
assume all supported compilers know -fno-stack-protector.
GCC 4.8 and Clang support this option (https://godbolt.org/z/_HDGzN)
Get rid of cc-option from -fno-stack-protector.
Remove CONFIG_CC_HAS_STACKPROTECTOR_NONE, which is always 'y'.
Note:
arch/mips/vdso/Makefile adds -fno-stack-protector twice, first
unconditionally, and second conditionally. I removed the second one.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
When copying the setup_header into the boot_params buffer, only the data
that is actually part of the setup_header should be copied.
efi_pe_entry() currently copies the entire second sector, which
initializes some of the fields in boot_params beyond the setup_header
with garbage (i.e. part of the real-mode boot code gets copied into
those fields).
This does not cause any issues currently because the fields that are
overwritten are padding, BIOS EDD information that won't get used, and
the E820 table which will get properly filled in later.
Fix this to only copy data that is actually part of the setup_header
structure.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Commit
987053a30016 ("efi/x86: Move command-line initrd loading to efi_main")
made the ramdisk_addr/ramdisk_size variables in efi_pe_entry unused, but
neglected to delete them.
Delete these unused variables.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
On 32-bit ARM, we may boot at HYP mode, or with the MMU and caches off
(or both), even though the EFI spec does not actually support this.
While booting at HYP mode is something we might tolerate, fiddling
with the caches is a more serious issue, as disabling the caches is
tricky to do safely from C code, and running without the Dcache makes
it impossible to support unaligned memory accesses, which is another
explicit requirement imposed by the EFI spec.
So take note of the CPU mode and MMU state in the EFI stub diagnostic
output so that we can easily diagnose any issues that may arise from
this. E.g.,
EFI stub: Entering in SVC mode with MMU enabled
Also, capture the CPSR and SCTLR system register values at EFI stub
entry, and after ExitBootServices() returns, and check whether the
MMU and Dcache were disabled at any point. If this is the case, a
diagnostic message like the following will be emitted:
efi: [Firmware Bug]: EFI stub was entered with MMU and Dcache disabled, please fix your firmware!
efi: CPSR at EFI stub entry : 0x600001d3
efi: SCTLR at EFI stub entry : 0x00c51838
efi: CPSR after ExitBootServices() : 0x600001d3
efi: SCTLR after ExitBootServices(): 0x00c50838
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
|
|
Provide missing descriptions for EFI stub helper functions.
Adjust formatting of existing descriptions to kernel style.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Link: https://lore.kernel.org/r/20200615234231.21059-1-xypron.glpk@gmx.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|