summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpiolib.c
AgeCommit message (Collapse)Author
2018-01-10gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()Geert Uytterhoeven
Since commit f11a04464ae57e8d ("i2c: gpio: Enable working over slow can_sleep GPIOs"), probing the i2c RTC connected to an i2c-gpio bus on r8a7740/armadillo fails with: rtc-s35390a 0-0030: error resetting chip rtc-s35390a: probe of 0-0030 failed with error -5 More debug code reveals: i2c i2c-0: master_xfer[0] R, addr=0x30, len=1 i2c i2c-0: NAK from device addr 0x30 msg #0 s35390a_get_reg: ret = -6 Commit 02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to actually be raw") moved open drain/source handling from gpiod_set_raw_value_commit() to gpiod_set_value(), but forgot to take into account that gpiod_set_value_cansleep() also needs this handling. The i2c protocol mandates that i2c signals are open drain, hence i2c communication fails. Fix this by adding the missing handling to gpiod_set_value_cansleep(), using a new common helper gpiod_set_value_nocheck(). Fixes: 02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to actually be raw") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [removed underscore syntax, added kerneldoc] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-09gpio: correct docs about return value of gpiod_get_directionWolfram Sang
The use of the GPIOF_* flags is deprecated, so don't advertise them here. Document the plain numbers for now until we have a better solution. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-05gpio: label descriptors using the device nameLinus Walleij
Some GPIO lines appear named "?" in the lsgpio dump due to their requesting drivers not passing a reasonable label. Most typically this happens if a device tree node just defines gpios = <...> and not foo-gpios = <...>, the former gets named "foo" and the latter gets named "?". However the struct device passed in is always valid so let's just label the GPIO with dev_name() on the device if no proper label was passed. Cc: Reported-by: Jason Kridner <jkridner@beagleboard.org> Reported-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-02gpiolib: add desc validation to gpiod_set_transitory()Vladimir Zapolskiy
The gpiod_set_transitory() function is publicly exported, and it is expected from it to be ready for usage with optional GPIOs on consumer's side. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-02gpiolib: remove a redundant check in gpiod_to_chip()Vladimir Zapolskiy
This non-functional change slightly simplifies the implementation of gpiod_to_chip() function. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-02gpiolib: don't dereference a desc before validationVladimir Zapolskiy
The fix restores a proper validation of an input gpio desc, which might be needed to deal with optional GPIOs correctly. Fixes: 02e479808b5d ("gpio: Alter semantics of *raw* operations to actually be raw") Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-28kernel/irq: Extend lockdep class for request mutexAndrew Lunn
The IRQ code already has support for lockdep class for the lock mutex in an interrupt descriptor. Extend this to add a second class for the request mutex in the descriptor. Not having a class is resulting in false positive splats in some code paths. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: linus.walleij@linaro.org Cc: grygorii.strashko@ti.com Cc: f.fainelli@gmail.com Link: https://lkml.kernel.org/r/1512234664-21555-1-git-send-email-andrew@lunn.ch
2017-12-21gpiolib: Fix typo in comment ("piochip_add_data")Jonathan Neuschäfer
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-21gpio: reduce descriptor validation code sizeRasmus Villemoes
While we do need macros to be able to return from the "calling" function, we can still factor the checks done by the VALIDATE_DESC* macros into a real helper function. This reduces the backslashtitis, avoids duplicating the logic in the two macros and saves about 1K of generated code: $ scripts/bloat-o-meter drivers/gpio/gpiolib.o.{0,1} add/remove: 1/0 grow/shrink: 0/15 up/down: 104/-1281 (-1177) Function old new delta validate_desc - 104 +104 gpiod_set_value 192 135 -57 gpiod_set_raw_value 125 67 -58 gpiod_direction_output 412 351 -61 gpiod_set_value_cansleep 150 70 -80 gpiod_set_raw_value_cansleep 132 52 -80 gpiod_get_raw_value 139 54 -85 gpiod_set_debounce 226 140 -86 gpiod_direction_output_raw 124 38 -86 gpiod_get_value 161 74 -87 gpiod_cansleep 126 39 -87 gpiod_get_raw_value_cansleep 130 39 -91 gpiod_get_value_cansleep 152 59 -93 gpiod_is_active_low 128 33 -95 gpiod_request 299 184 -115 gpiod_direction_input 386 266 -120 Total: Before=25460, After=24283, chg -4.62% Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-21Revert "gpio: set up initial state from .get_direction()"Timur Tabi
This reverts commit 72d3200061776264941be1b5a9bb8e926b3b30a5. We cannot blindly query the direction of all GPIOs when the pins are first registered. The get_direction callback normally triggers a read/write to hardware, but we shouldn't be touching the hardware for an individual GPIO until after it's been properly claimed. Signed-off-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20gpiolib: use kstrdup_const() for gpio_device labelBartosz Golaszewski
Users often pass a pointer to a static string to gpiochip_add_data() family of functions. Avoid unnecessary memory allocations with the provided helper routine. While at it: use a ternary operator instead of an if else for brevity. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: gpiolib: Generalise state persistence beyond sleepAndrew Jeffery
General support for state persistence is added to gpiolib with the introduction of a new pinconf parameter to propagate the request to hardware. The existing persistence support for sleep is adapted to include hardware support if the GPIO driver provides it. Persistence continues to be enabled by default; in-kernel consumers can opt out, but userspace (currently) does not have a choice. The *_SLEEP_MAY_LOSE_VALUE and *_SLEEP_MAINTAIN_VALUE symbols are renamed, dropping the SLEEP prefix to reflect that the concept is no longer sleep-specific. I feel that renaming to just *_MAY_LOSE_VALUE could initially be misinterpreted, so I've further changed the symbols to *_TRANSITORY and *_PERSISTENT to address this. The sysfs interface is modified only to keep consistency with the chardev interface in enforcing persistence for userspace exports. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30Merge branch 'ib-gpio-acpi-quirks' into develLinus Walleij
2017-11-30gpiolib: don't allow OPEN_DRAIN & OPEN_SOURCE flags simultaneouslyBartosz Golaszewski
Do not allow OPEN_SOURCE & OPEN_DRAIN flags in a single request. If the hardware actually supports enabling both at the same time the electrical result would be disastrous. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Consolidate debug output in acpi_gpio_update_gpiod_flags()Andy Shevchenko
We have the duplicated debug strings printed whenever acpi_gpio_update_gpiod_flags() fails. Instead of doing this by callers, move the debug output inside function. In one case convert almost useless pr_debug() to dev_dbg() where actual consumer of GPIO resource is disclosed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-16Merge tag 'pinctrl-v4.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.15 kernel cycle: Core: - The pin control Kconfig entry PINCTRL is now turned into a menuconfig option. This obviously has the implication of making the subsystem menu visible in menuconfig. This is happening because of two things: (a) Intel have started to deploy and depend on pin controllers in a way that is affecting users directly. This happens on the highly integrated laptop chipsets named after geographical places: baytrail, broxton, cannonlake, cedarfork, cherryview, denverton, geminilake, lewisburg, merrifield, sunrisepoint... It started a while back and now it is ever more evident that this is crucial infrastructure for x86 laptops and not an embedded obscurity anymore. Users need to be aware. (b) Pin control expanders on I2C and SPI that are arch-agnostic. Currently Semtech SX150X and Microchip MCP28x08 but more are expected. Users will have to be able to configure these in directly for their set-up. - Just go and select GPIOLIB now that we made sure that GPIOLIB is a very vanilla subsystem. Do not depend on it, if we need it, select it. - Exposing the pin control subsystem in menuconfig uncovered a bunch of obscure bugs that are now hopefully fixed, all more or less pertaining to Blackfin. - Unified namespace for cross-calls between pin control and GPIO. - New support for clock skew/delay generic DT bindings and generic pin config options for this. - Minor documentation improvements. Various: - The Renesas SH-PFC pin controller has evolved a lot. It seems Renesas are churning out new SoCs by the minute. - A bunch of non-critical fixes for the Rockchip driver. - Improve the use of library functions instead of open coding. - Support the MCP28018 variant in the MCP28x08 driver. - Static constifying" * tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits) pinctrl: gemini: Fix missing pad descriptions pinctrl: Add some depends on HAS_IOMEM pinctrl: samsung/s3c24xx: add CONFIG_OF dependency pinctrl: gemini: Fix GMAC groups pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support pinctrl: ti-iodelay: remove redundant unused variable dev pinctrl: max77620: Use common error handling code in max77620_pinconf_set() pinctrl: gemini: Implement clock skew/delay config pinctrl: gemini: Use generic DT parser pinctrl: Add skew-delay pin config and bindings pinctrl: armada-37xx: Add edge both type gpio irq support pinctrl: uniphier: remove eMMC hardware reset pin-mux pinctrl: rockchip: Add iomux-route switching support for rk3288 pinctrl: intel: Add Intel Cedar Fork PCH pin controller support pinctrl: intel: Make offset to interrupt status register configurable pinctrl: sunxi: Enforce the strict mode by default pinctrl: sunxi: Disable strict mode for old pinctrl drivers pinctrl: sunxi: Introduce the strict flag pinctrl: sh-pfc: Save/restore registers for PSCI system suspend pinctrl: sh-pfc: r8a7796: Use generic IOCTRL register description ...
2017-11-14Merge branch 'i2c/for-4.15' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "This contains two bigger than usual tree-wide changes this time. They all have proper acks, caused no merge conflicts in linux-next where they have been for a while. They are namely: - to-gpiod conversion of the i2c-gpio driver and its users (touching arch/* and drivers/mfd/*) - adding a sbs-manager based on I2C core updates to SMBus alerts (touching drivers/power/*) Other notable changes: - i2c_boardinfo can now carry a dev_name to be used when the device is created. This is because some devices in ACPI world need fixed names to find the regulators. - the designware driver got a long discussed overhaul of its PM handling. img-scb and davinci got PM support, too. - at24 driver has way better OF support. And it has a new maintainer. Thanks Bartosz for stepping up! The rest is regular driver updates and fixes" * 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits) ARM: sa1100: simpad: Correct I2C GPIO offsets i2c: aspeed: Deassert reset in probe eeprom: at24: Add OF device ID table MAINTAINERS: new maintainer for AT24 driver i2c: nuc900: remove platform_data, too i2c: thunderx: Remove duplicate NULL check i2c: taos-evm: Remove duplicate NULL check i2c: Make i2c_unregister_device() NULL-aware i2c: xgene-slimpro: Support v2 i2c: mpc: remove useless variable initialization i2c: omap: Trigger bus recovery in lockup case i2c: gpio: Add support for named gpios in DT dt-bindings: i2c: i2c-gpio: Add support for named gpios i2c: gpio: Local vars in probe i2c: gpio: Augment all boardfiles to use open drain i2c: gpio: Enforce open drain through gpiolib gpio: Make it possible for consumers to enforce open drain i2c: gpio: Convert to use descriptors power: supply: sbs-message: fix some code style issues power: supply: sbs-battery: remove unchecked return var ...
2017-11-09Merge branch 'gpio-irqchip-rework' of /home/linus/linux-gpio into develLinus Walleij
2017-11-08gpio: Fix undefined lock_dep_classLinus Walleij
The struct is wrong, this is named lock_class_key. Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Automatically add lockdep keysThierry Reding
In order to avoid lockdep boilerplate in individual drivers, turn the gpiochip_add_data() function into a macro that creates a unique class key for each driver. Note that this has the slight disadvantage of adding a key for each driver registered with the system. However, these keys are 8 bytes in size, which is negligible and a small price to pay for generic infrastructure. Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> [renane __gpiochip_add_data() to gpiochip_add_data_with_key] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Introduce struct gpio_irq_chip.firstThierry Reding
Some GPIO chips cannot support sparse IRQ numbering and therefore need to manually allocate their interrupt descriptors statically. For these cases, a driver can pass the first allocated IRQ via the struct gpio_irq_chip's "first" field and thereby cause the IRQ domain to map all IRQs during initialization. Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Disambiguate struct gpio_irq_chip.nestedThierry Reding
The nested field in struct gpio_irq_chip currently has two meanings. On one hand it marks an IRQ chip as being nested (as opposed to chained), while on the other hand it also means that an IRQ chip uses nested thread handlers. However, nested IRQ chips can already be identified by the fact that they don't pass a parent handler (the driver would instead already have installed a nested handler using request_irq()). Therefore, the only use for the nested attribute is to inform gpiolib that an IRQ chip uses nested thread handlers (as opposed to regular, non-threaded handlers). To clarify its purpose, rename the field to "threaded". Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Export gpiochip_irq_{map,unmap}()Thierry Reding
Export these functions so that drivers can explicitly use these when setting up their IRQ domain. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Implement tighter IRQ chip integrationThierry Reding
Currently GPIO drivers are required to add the GPIO chip and its corresponding IRQ chip separately, which can result in a lot of boilerplate. Use the newly introduced struct gpio_irq_chip, embedded in struct gpio_chip, that drivers can fill in if they want the GPIO core to automatically register the IRQ chip associated with a GPIO chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Move lock_key into struct gpio_irq_chipThierry Reding
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Move irq_valid_mask into struct gpio_irq_chipThierry Reding
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Move irq_nested into struct gpio_irq_chipThierry Reding
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Move irq_chained_parent to struct gpio_irq_chipThierry Reding
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Move irq_default_type to struct gpio_irq_chipThierry Reding
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Move irq_handler to struct gpio_irq_chipThierry Reding
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Move irqdomain into struct gpio_irq_chipThierry Reding
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Move irqchip into struct gpio_irq_chipThierry Reding
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-30gpio: Make it possible for consumers to enforce open drainLinus Walleij
Some busses, like I2C, strictly need to have the line handled as open drain, i.e. not actively driven high. For this reason the i2c-gpio.c bit-banged I2C driver is reimplementing open drain handling outside of gpiolib. This is not very optimal. Instead make it possible for a consumer to explcitly express that the line must be handled as open drain instead of allowing local hacks papering over this issue. The descriptor tables, whether DT, ACPI or board files, should of course have flagged these lines as open drain. E.g.: enum gpio_lookup_flags GPIO_OPEN_DRAIN for a board file, or gpios = <&foo 42 GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN>; in a device tree using <dt-bindings/gpio/gpio.h> But more often than not, these descriptors are wrong. So we need to make it possible for consumers to enforce this open drain behaviour. We now have two new enumerated GPIO descriptor config flags: GPIOD_OUT_LOW_OPEN_DRAIN and GPIOD_OUT_HIGH_OPEN_DRAIN that will set up the lined enforced as open drain as output low or high, using open drain (if the driver supports it) or using open drain emulation (setting the line as input to drive it high) from the gpiolib core. Cc: linux-gpio@vger.kernel.org Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-20gpio: Fix loose spellingAndrew Jeffery
Literally. I expect "lose" was meant here, rather than "loose", though you could feasibly use a somewhat uncommon definition of "loose" to mean what would be meant by "lose": "Loose the hounds" for instance, as in "Release the hounds". Substituting in "value" for "hounds" gives "release the value", and makes some sense, but futher substituting back to loose gives "loose the value" which overall just seems a bit anachronistic. Instead, use modern, pragmatic English and save a character. Cc: Russell Currey <ruscur@russell.cc> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-19gpiolib: clear irq handler and data in one goMartin Kaiser
Replace the two separate calls for clearing the irqchip's chained handler and its data with a single irq_set_chained_handler_and_data() call. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-19gpiolib: don't allow OPEN_DRAIN & OPEN_SOURCE flags for inputBartosz Golaszewski
OPEN_DRAIN and OPEN_SOURCE flags only affect the way we drive a GPIO line, so they only make sense for output mode. Just as we only allow input mode for event handle requests, don't allow passing open-drain and open-source flags for any other mode than explicit output. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-19gpiolib: only check line handle flags onceBartosz Golaszewski
There's no need to check the validity of handle request flags more than once, right after copying the data from user. Move the check out of the for loop and simplify the error path by bailing out before allocating any resources. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-19gpio: Introduce ->get_multiple callbackLukas Wunner
SPI-attached GPIO controllers typically read out all inputs in one go. If callers desire the values of multipe inputs, ideally a single readout should take place to return the desired values. However the current driver API only offers a ->get callback but no ->get_multiple (unlike ->set_multiple, which is present). Thus, to read multiple inputs, a full readout needs to be performed for every single value (barring driver-internal caching), which is inefficient. In fact, the lack of a ->get_multiple callback has been bemoaned repeatedly by the gpio subsystem maintainer: http://www.spinics.net/lists/linux-gpio/msg10571.html http://www.spinics.net/lists/devicetree/msg121734.html Introduce the missing callback. Add corresponding consumer functions such as gpiod_get_array_value(). Amend linehandle_ioctl() to take advantage of the newly added infrastructure. Update the documentation. Cc: Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-04gpio: Alter semantics of *raw* operations to actually be rawLinus Walleij
Currently calls to: gpiod_direction_output_raw() gpiod_set_raw_value() gpiod_set_raw_array_value() gpiod_set_raw_value_cansleep() gpiod_set_raw_array_value_cansleep() Respect that we do not want to invert the value written, but will still apply special open drain/open source semantics if the line has an open drain/open source flag. It also forbids us from driving an output marked as an interrupt line. This does not fit with the function name and expected semantics. In the w1 host driver (for example) we need to handle a line as open drain but sometimes force it to pull up, which means we should be able to use the gpiod_set_raw_value() for this, but it currently does not work. There are also use cases where users actually want to drive a line used by an interrupt. This is what they should be expected to use the *raw* accessors for. I have looked over the current users of this API and they do not seem to be using the *raw* accessors with open drain or open source so let's augment this behaviour before we have users expecting the inconsistent semantic. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-04gpio: Get rid of _prefix and __prefixesLinus Walleij
The arbitrarily marking of a function with _ or __ is taking to mean "perform some inner core of the caller" or something like that. At other times, this syntax has a totally different meaning. I don't like this since it is unambious and unhelpful to people reading the code, so replace it with _commit() suffixes. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-22pinctrl/gpio: Unify namespace for cross-callsLinus Walleij
The pinctrl_request_gpio() and pinctrl_free_gpio() break the nice namespacing in the other cross-calls like pinctrl_gpio_foo(). Just rename them and all references so we have one namespace with all cross-calls under pinctrl_gpio_*(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31Revert "gpiolib: request the gpio before querying its direction"Linus Walleij
This reverts commit 108d23e322a247d9f89ba2e2742520ead0944cc9. It turns out this causes a regression on the OMAP, Marvell and Renesas. Reported-by: Tony Lindgren <tony@atomide.com> Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reported-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-23gpio: add gpio_add_lookup_tables() to add several tables at onceDmitry Torokhov
When converting legacy board to use gpiod API() there might be several lookup tables in board file, let's provide a way to register them all at once. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpio: Cleanup kerneldocThierry Reding
Some kerneldoc has become stale or wasn't quite correct from the outset. Fix up the most serious issues to silence warnings when building the documentation. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpio: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Tien Hock Loh <thloh@altera.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpiolib: allow gpio irqchip to map irqs dynamicallyGrygorii Strashko
Now IRQ mappings are always created for all (allowed) GPIOs in gpiochip in gpiochip_irqchip_add_key() which goes against the idea of SPARSE_IRQ and, as result, leads to: - increasing of memory consumption for IRQ descriptors most of which will never ever be used (espessially on platform with a high number of GPIOs). (sizeof(struct irq_desc) == 256 on my tested platforms) - imposibility to use GPIO irqchip APIs by gpio drivers when HW implements GPIO IRQ functionality as IRQ crossbar/router which has only limited number of IRQ outputs (example from [1], all GPIOs can be mapped on only 8 IRQs). Hence, remove static IRQ mapping code from gpiochip_irqchip_add_key() and instead replace irq_find_mapping() with irq_create_mapping() in gpiochip_to_irq(). Also add additional gpiochip_irqchip_irq_valid() calls in gpiochip_to_irq() and gpiochip_irq_map(). After this change gpio2irq mapping will happen the following way when GPIO irqchip APIs are used by gpio driver: - IRQ mappings will be created statically if driver passes first_irq>0 vlaue in gpiochip_irqchip_add_key(). - IRQ mappings will be created dynamically from gpio_to_irq() or of_irq_get(). Tested on am335x-evm and dra72-evm-revc. - dra72-evm-revc: number of created irq mappings decreased from 402 -> 135 Mem savings 267*256 = 68352 (66kB) - am335x-evm: number of created irq mappings decreased from 188 -> 63 Mem savings 125*256 = 32000 (31kB) [1] https://lkml.org/lkml/2017/6/15/428 Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpiolib: request the gpio before querying its directionTimur Tabi
Before querying a GPIO to determine its direction, the GPIO should be formally requested. This allows the GPIO driver to block access to unavailable GPIOs, which makes it easier for some drivers to support sparse GPIO maps. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-01gpiolib: skip unwanted events, don't convert them to opposite edgeBartosz Golaszewski
The previous fix for filtering out of unwatched events was not entirely correct. Instead of skipping the events we don't want, they are now interpreted as events with opposing edge. In order to fix it: always read the GPIO line value on interrupt and only emit the event if it corresponds with the event type we requested. Cc: stable@vger.kernel.org Fixes: ad537b822577 ("gpiolib: fix filtering out unwanted events") Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-07Merge tag 'gpio-v4.13-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.13 series. Some administrativa: I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO driver coming in through this tree, along with a whole bunch of Exar 8250 fixes. These are ACKed by Greg and also hit drivers/platform/* where they are ACKed by Andy Shevchenko. Speaking about drivers/platform/* there is also a bunch of ACPI stuff coming through that route, again ACKed by Andy. The MCP23S08 changes are coming in here as well. You already have the commits in your tree, so this is just a result of sharing an immutable branch between pin control and GPIO. Core: - Export add/remove for lookup tables so that modules can export GPIO descriptor tables. - Handle GPIO sleep states: it is now possible to flag that a GPIO line may loose its state during suspend/resume of the system to save power. This is used in the Wolfson Micro Arizona driver. - ACPI-based GPIO was tightened up a lot around the edges. - Use bitmap_fill() to speed up a loop. New drivers: - Exar XRA1403 SPI-based GPIO. - MVEBU driver now supports Armada 7K and 8K. - LP87565 PMIC GPIO. - Renesas R-CAR R8A7743 (RZ/G1M). - The new IOT2040 8250 serial/GPIO also comes in through this changeset. Substantial driver changes: - Seriously fix the Exar 8250 GPIO portions to work. - The MCP23S08 was moved out to a pin control driver. - Convert MEVEBU to use regmap for register access. - Drop Vulcan support from the Broadcom driver. - Serious cleanup and improvement of the mockup driver, giving us a better test coverage. Misc: - Lots of janitorial clean up. - A bunch of documentation fixes" * tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits) serial: exar: Add support for IOT2040 device gpio-exar/8250-exar: Make set of exported GPIOs configurable platform: Accept const properties serial: exar: Factor out platform hooks gpio-exar/8250-exar: Rearrange gpiochip parenthood gpio: exar: Fix iomap request gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards serial: uapi: Add support for bus termination gpio: rcar: Add R8A7743 (RZ/G1M) support gpio: gpio-wcove: Fix GPIO control register offset calculation gpio: lp87565: Add support for GPIO gpio: dwapb: fix missing first irq for edgeboth irq type MAINTAINERS: Take maintainership for GPIO ACPI support gpio: exar: Fix reading of directions and values gpio: exar: Allocate resources on behalf of the platform device gpio-exar/8250-exar: Fix passing in of parent PCI device gpio: mockup: use devm_kcalloc() where applicable gpio: mockup: add myself as author gpio: mockup: improve the error message gpio: mockup: don't return magic numbers from probe() ...
generated by cgit (git 2.34.1) at 2025-06-05 08:14:48 +0000