| Age | Commit message (Collapse) | Author |
|---|
|
Previously, drivers/pinctrl/nomadik/pinctrl-nomadik.c registered two
platform drivers: pinctrl & GPIO. Move the GPIO aspect to the
drivers/gpio/ folder, as would be expected.
Both drivers are intertwined for a reason; pinctrl requires access to
GPIO registers for pinmuxing, pull-disable, disabling interrupts while
setting the muxing and wakeup control. Information sharing is done
through a shared array containing GPIO chips and a few helper
functions. That shared array is not touched from gpio-nomadik when
CONFIG_PINCTRL_NOMADIK is not defined.
Make no change to the code that moved into gpio-nomadik; there should be
no behavior change following. A few functions are shared and header
comments are added. Checkpatch warnings are addressed. NUM_BANKS is
renamed to NMK_MAX_BANKS.
It is supported to compile gpio-nomadik without pinctrl-nomadik. The
opposite is not true.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-6-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This devm API takes a consumer device as an argument to setup the devm
action, but throws it away when calling further into gpiolib. This leads
to odd debug messages like this:
(NULL device *): using DT '/gpio-keys/switch-pen-insert' for '(null)' GPIO lookup
Let's pass the consumer device down, by directly calling what
fwnode_gpiod_get_index() calls but pass the device used for devm. This
changes the message to look like this instead:
gpio-keys gpio-keys: using DT '/gpio-keys/switch-pen-insert' for '(null)' GPIO lookup
Note that callers of fwnode_gpiod_get_index() will still see the NULL
device pointer debug message, but there's not much we can do about that
because the API doesn't take a struct device.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 8eb1f71e7acc ("gpiolib: consolidate GPIO lookups")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Display debugfs information about all simulated GPIOs, not only the
requested ones.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
With SRCU we can now correctly handle the situation when a GPIO provider
is removed while having users still holding references to GPIO
descriptors. Remove all warnings emitted in this situation.
Suggested-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
|
|
Typically, whenever a human-readable name is created for objects using
a software node, its name is delimited with ":" as dashes are often used
in other parts of the name. Make gpio-sim use the same pattern. This
results in better looking default names:
gpio-sim.0:node0
gpio-sim.0:node1
gpio-sim.1:node0
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
We have three functions in gpio-sim that are called with the device lock
already held. We use the "_unlocked" suffix in their names to indicate
that. This has proven to be confusing though as the naming convention in
the kernel varies between using "_locked" or "_unlocked" for this
purpose. Naming convention also doesn't enforce anything. Let's remove
the suffix and add lockdep annotation at the top of these functions.
This makes it clear the function requires a lock to be held (and which
one specifically!) as well as results in a warning if it's not the case.
The only place where the information is lost is the place where the
function is called but the caller doesn't care about that information
anyway.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The ChromeOS embedded controller (EC) supports setting the state of
GPIOs when the system is unlocked, and getting the state of GPIOs in all
cases. The GPIOs are on the EC itself, so the EC acts similar to a GPIO
expander. Add a driver to get and set the GPIOs on the EC through the
host command interface.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This prepares the pwm sub-driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/2edc3adbb2c40b76b3b3dac82de82f3036bec1d5.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
Similar to gpiochip_generic_request() and gpiochip_generic_free() the
gpiochip_generic_config() function needs to handle the case where there
are no pinctrl pins mapped to the GPIOs, usually through the gpio-ranges
device tree property.
Commit f34fd6ee1be8 ("gpio: dwapb: Use generic request, free and
set_config") set the .set_config callback to gpiochip_generic_config()
in the dwapb GPIO driver so the GPIO API can set pinctrl configuration
for the corresponding pins. Most boards using the dwapb driver do not
set the gpio-ranges device tree property though, and in this case
gpiochip_generic_config() would return -EPROPE_DEFER rather than the
previous -ENOTSUPP return value. This in turn makes
gpio_set_config_with_argument_optional() fail and propagate the error to
any driver requesting GPIOs.
Fixes: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Reported-by: Jisheng Zhang <jszhang@kernel.org>
Closes: https://lore.kernel.org/linux-gpio/ZdC_g3U4l0CJIWzh@xhacker/
Tested-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Pointer to the struct of_phandle_args can be made const after
gpio_device_find() arguments got constified. This should be part of
commit 4a92857d6e83 ("gpio: constify opaque pointer "data" in
gpio_device_find()").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Since commit 1f2bcb8c8ccd ("gpio: protect the descriptor label with
SRCU"), desc_set_label() already allocates memory for the label, so there
is no need to allocate it again. If we do, we leak it.
unreferenced object 0xffff0000c3e4d0c0 (size 32):
comm "kworker/u16:4", pid 60, jiffies 4294894555
hex dump (first 32 bytes):
72 65 67 75 6c 61 74 6f 72 2d 63 61 6e 32 2d 73 regulator-can2-s
74 62 79 00 00 00 ff ff ff ff ff ff eb db ff ff tby.............
backtrace (crc 2c3a0350):
[<00000000e93c5cf4>] kmemleak_alloc+0x34/0x40
[<0000000097a2657f>] __kmalloc_node_track_caller+0x2c4/0x524
[<000000000dd1c057>] kstrdup+0x4c/0x98
[<00000000b513a96a>] kstrdup_const+0x34/0x40
[<000000008a7f0feb>] gpiod_request_commit+0xdc/0x358
[<00000000fc71ad64>] gpiod_request+0xd8/0x204
[<00000000fa24b091>] gpiod_find_and_request+0x170/0x780
[<0000000086ecf92d>] gpiod_get_index+0x70/0xe0
[<000000004aef97f9>] gpiod_get_optional+0x18/0x30
[<00000000312f1b25>] reg_fixed_voltage_probe+0x58c/0xad8
[<00000000e6f47635>] platform_probe+0xc4/0x198
[<00000000cf78fbdb>] really_probe+0x204/0x5a8
[<00000000e28d05ec>] __driver_probe_device+0x158/0x2c4
[<00000000e4fe452b>] driver_probe_device+0x60/0x18c
[<00000000479fcf5d>] __device_attach_driver+0x168/0x208
[<000000007d389f38>] bus_for_each_drv+0x104/0x190
Fixes: 1f2bcb8c8ccd ("gpio: protect the descriptor label with SRCU")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The opaque pointer "data" in each match function used by
gpio_device_find() is a pointer to const, thus the same argument passed
to gpio_device_find() can adjusted similarly.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
We are actually passing the gc pointer to chip_dbg() so we have to
srcu_dereference() it.
Fixes: 8574b5b47610 ("gpio: cdev: use correct pointer accessors with SRCU")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/lkml/179caa10-5f86-4707-8bb0-fe1b316326d6@samsung.com/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
The logic is inverted, we want to return if the chip *IS* NULL.
Fixes: d83cee3d2bb1 ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-gpio/15671341-0b29-40e0-b487-0a4cdc414d8e@moroto.mountain/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There are two legacy, deprecated functions - gpiod_to_chip() and
gpio_device_get_chip() - that still have users in tree. They return the
address of the SRCU-protected chip outside of the read-only critical
sections. They are inherently dangerous and the users should convert to
safer alternatives. Let's explicitly silence lockdep warnings by using
rcu_dereference_check(ptr, 1). While at it: reuse
gpio_device_get_chip() in gpiod_to_chip().
Fixes: d83cee3d2bb1 ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Lockdep with CONFIG_PROVE_RCU enabled reports false positives about
suspicious rcu_dereference() usage. Let's silence it by using
srcu_dereference() which is the correct helper with SRCU.
Fixes: d83cee3d2bb1 ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
|
|
We never dereference the chip pointer in character device code so we can
use the lighter rcu_access_pointer() helper. This also makes lockep
happier as it no longer complains about suspicious rcu_dereference()
usage.
Fixes: d83cee3d2bb1 ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
|
|
gpiod_hog() may be called without the gpio_device SRCU read lock taken
so we need to do it here as well. It's alright if someone else is
already holding the lock as SRCU read critical sections can be nested.
Fixes: d83cee3d2bb1 ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
|
|
In certain situations we may end up taking the GPIO descriptor SRCU read
lock in of_gpiochip_add() before the SRCU struct is initialized. Move
the initialization before the call to of_gpiochip_add().
Fixes: be711caa87c5 ("gpio: add SRCU infrastructure to struct gpio_desc")
Fixes: 1f2bcb8c8ccd ("gpio: protect the descriptor label with SRCU")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122228.e607a080-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
We still have some functions that return the address of the GPIO chip
associated with the GPIO device. This is dangerous and the users should
find a better solution. Let's add appropriate comments to the kernel
docs.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
With all accesses to gdev->chip being protected with SRCU, we can now
remove the RW-semaphore specific to the character device which
fulfilled the same role up to this point.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Ensure we cannot crash if the GPIO device gets unregistered (and the
chip pointer set to NULL) during any of the API calls.
To that end: wait for all users of gdev->chip to exit their read-only
SRCU critical sections in gpiochip_remove().
For brevity: add a guard class which can be instantiated at the top of
every function requiring read-only access to the chip pointer and use it
in all API calls taking a GPIO descriptor as argument. In places where
we only deal with the GPIO device - use regular guard() helpers and
rcu_dereference() for chip access. Do the same in API calls taking a
const pointer to gpio_desc.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add the SRCU struct to GPIO device. It will be used to serialize access
to the GPIO chip pointer. Initialize and clean it up where applicable.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Duplicating the can_sleep value in GPIO device will allow us to not
needlessly dereference the chip pointer in several places and reduce the
number of SRCU read-only critical sections.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
We don't need to check the gdev pointer in struct gpio_desc - it's
always assigned and never cleared. It's also pointless to check
gdev->chip before we actually serialize access to it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Checking desc->gdev->chip for NULL without holding it in place with some
serializing mechanism is pointless. Remove this check. Also don't check
desc->gdev for NULL as it can never happen. We'll be protecting
gdev->chip with SRCU soon but we will provide a dedicated, automatic
class for that.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
We don't need to dereference gdev->chip in gpiochip_setup_dev() as at
the time it's called, the label in the associated struct gpio_device is
already set.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Don't dereference gdev->chip if the same information can be obtained
from struct gpio_device.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The variable holding the number of GPIO lines is duplicated in GPIO
device so read it instead of unnecessarily dereferencing the chip
pointer.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
gpio_device_get_desc() is the safer alternative to gpiochip_get_desc().
As we don't really need to dereference the chip pointer to retrieve the
descriptors in character device code, let's use it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
We're working towards protecting the chip pointer in struct gpio_device
with SRCU. In order to use it in sysfs callbacks we must pass the pointer
to the GPIO device that wraps the chip instead of the address of the
chip itself as the user data.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Checking the gdev->mockdev pointer for NULL must be part of the critical
section.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The GPIO chip pointer is unused. Let's remove it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
We now removed the gpio_lock spinlock and modified the places
previously protected by it to handle desc->flags access in a consistent
way. Let's improve other places that were previously unprotected by
reading the flags field of gpio_desc once and using the stored value for
logic consistency. If we need to modify the field, let's also write it
back once with a consistent value resulting from the function's logic.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The "multi-function" gpio_lock is pretty much useless with how it's used
in GPIOLIB currently. Because many GPIO API calls can be called from all
contexts but may also call into sleeping driver callbacks, there are
many places with utterly broken workarounds like yielding the lock to
call a possibly sleeping function and then re-acquiring it again without
taking into account that the protected state may have changed.
It was also used to protect several unrelated things: like individual
descriptors AND the GPIO device list. We now serialize access to these
two with SRCU and so can finally remove the spinlock.
There is of course the question of consistency of lockless access to
GPIO descriptors. Because we only support exclusive access to GPIOs
(officially anyway, I'm looking at you broken
GPIOD_FLAGS_BIT_NONEXCLUSIVE bit...) and the API contract with providers
does not guarantee serialization, it's enough to ensure we cannot
accidentally dereference an invalid pointer and that the state we present
to both users and providers remains consistent. To achieve that: read the
flags field atomically except for a few special cases. Read their current
value before executing callback code and use this value for any subsequent
logic. Modifying the flags depends on the particular use-case and can
differ. For instance: when requesting a GPIO, we need to set the
REQUESTED bit immediately so that the next user trying to request the
same line sees -EBUSY.
While at it: the allocations that used GFP_ATOMIC until this point can
now switch to GFP_KERNEL.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
With the list of GPIO devices now protected with SRCU we can use
gpio_device_find() to traverse it from sysfs.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
In order to ensure that the label is not freed while it's being
accessed, let's protect it with SRCU and synchronize it everytime it's
changed.
Let's modify desc_set_label() to manage the memory used for the label as
it can only be freed once synchronize_srcu() returns.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Extend the GPIO descriptor with an SRCU structure in order to serialize
the access to the label. Initialize and clean it up where applicable.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
We will soon serialize access to the descriptor label using SRCU. The
write-side of the protection will require calling synchronize_srcu()
which must not be called from atomic context. We have two irq helpers:
gpiochip_lock_as_irq() and gpiochip_unlock_as_irq() that set the label
if the GPIO is not requested but is being used as interrupt. They are
called with a spinlock held from the interrupt subsystem.
They must not do it if we are to use SRCU so instead let's move the
special corner case to a dedicated getter.
Don't actually set the label to "interrupt" in the above case but rather
use the newly added gpiod_get_label() helper to hide the logic that
atomically checks the descriptor flags and returns the address of a
static "interrupt" string.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
We will soon serialize access to the descriptor label using SRCU. The
write-side of the protection will require calling synchronize_srcu()
which must not be called from atomic context. We have two irq helpers:
gpiochip_lock_as_irq() and gpiochip_unlock_as_irq() that set the label
if the GPIO is not requested but is being used as interrupt. They are
called with a spinlock held from the interrupt subsystem.
They must not do it if we are to use SRCU so instead let's move the
special corner case to a dedicated getter.
First: let's implement and use the getter where it's applicable.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The general rule of the kernel is to not provide symbols that have no
users upstream. Let's remove logging helpers that are not used anywhere.
This will save us work later when we'll be modifying them to use the
upcoming SRCU infrastructure.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The device nodes representing GPIO hogs cannot be deleted without
unregistering the GPIO chip so there's no need to serialize their access.
However we must ensure that users can get the right address so write and
read it atomically.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
We're working towards removing the "multi-function" GPIO spinlock that's
implemented terribly wrong. We tried using an RW-semaphore to protect
the list of GPIO devices but it turned out that we still have old code
using legacy GPIO calls that need to translate the global GPIO number to
the address of the associated descriptor and - to that end - traverse
the list while holding the lock. If we change the spinlock to a sleeping
lock then we'll end up with "scheduling while atomic" bugs.
Let's allow lockless traversal of the list using SRCU and only use the
mutex when modyfing the list.
While at it: let's protect the period between when we start the lookup
and when we finally request the descriptor (increasing the reference
count of the GPIO device) with the SRCU read lock.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The match function used in gpio_device_find() should not modify the
contents of passed opaque pointer, because such modification would not
be necessary for actual matching and it could lead to quite unreadable,
spaghetti code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[Bartosz: fix coding style in header]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Linux 6.8-rc4
Pulling this for a bugfix upstream with which the gpio/for-next branch
conflicts.
|
|
It's useful to have the device type information for those sub-devices
that are actually GPIO chips registered with GPIOLIB. While at it: use
the device type struct to setup the release callback which is the
preferred way to use the device API.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 48e1b4d369cf ("gpiolib: remove the GPIO device from the list
when it's unregistered") we remove the GPIO device entry from the global
list (used to order devices by their GPIO ranges) when unregistering the
chip, not when releasing the device. It will not happen when the last
reference is put anymore. This means, we need to remove it in error path
in gpiochip_add_data_with_key() unconditionally, without checking if the
device's .release() callback is set.
Fixes: 48e1b4d369cf ("gpiolib: remove the GPIO device from the list when it's unregistered")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the gpio_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Enable COMPILE_TEST for the vf610 gpio driver to support test builds on
systems without this hardware.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The vf610 gpio driver is enabled by default for all i.MX machines,
without any option to disable it in a board-specific config file.
Most i.MX chipsets have no hardware for this driver. Change the default
to enable GPIO_VF610 for SOC_VF610 and disable it otherwise.
Add a text description after the bool type, this makes the driver
selectable by make config etc.
Fixes: 30a35c07d9e9 ("gpio: vf610: drop the SOC_VF610 dependency for GPIO_VF610")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
