summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915
AgeCommit message (Collapse)Author
2025-02-13drm/i915/gt: Use spin_lock_irqsave() in interruptible contextKrzysztof Karas
spin_lock/unlock() functions used in interrupt contexts could result in a deadlock, as seen in GitLab issue #13399, which occurs when interrupt comes in while holding a lock. Try to remedy the problem by saving irq state before spin lock acquisition. v2: add irqs' state save/restore calls to all locks/unlocks in signal_irq_work() execution (Maciej) v3: use with spin_lock_irqsave() in guc_lrc_desc_unpin() instead of other lock/unlock calls and add Fixes and Cc tags (Tvrtko); change title and commit message Fixes: 2f2cc53b5fe7 ("drm/i915/guc: Close deregister-context race against CT-loss") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13399 Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com> Cc: <stable@vger.kernel.org> # v6.9+ Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/pusppq5ybyszau2oocboj3mtj5x574gwij323jlclm5zxvimmu@mnfg6odxbpsv
2025-02-13drm/i915: Use device wedged eventRaag Jadav
Now that we have device wedged event provided by DRM core, make use of it and support both driver rebind and bus-reset based recovery. With this in place, userspace will be notified of wedged device on gt reset failure. Signed-off-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250204070528.1919158-5-raag.jadav@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-02-13drm/i915/psr: Write PSR2_MAN_TRK_CTL on DSB commit as wellJouni Högander
Add PSR2_MAN_TRK_CTL writing into DSB commit in intel_atomic_dsb_finish. Taking PSR lock over DSB commit is not needed because PSR2_MAN_TRK_CTL is now written only by DSB. Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-8-jouni.hogander@intel.com
2025-02-13drm/i915/psr: Allow writing PSR2_MAN_TRK_CTL using DSBJouni Högander
Allow writing PSR2_MAN_TRK_CTL using DSB by using intel_de_write_dsb. Do not check intel_dp->psr.lock being held when using DSB. This assertion doesn't make sense as in case of using DSB the actual write happens later and we are not taking intel_dp->psr.lock mutex over dsb commit. Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-7-jouni.hogander@intel.com
2025-02-13drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwardsJouni Högander
In LunarLake we have SFF_CTL register which contains SFF bit ored with respective SFF bit in PSR2_MAN_TRK_CTL register. Use this register instead of the bit in PSR2_MAN_TRK_CTL on frontbuffer tracking callbacks. This helps us avoiding taking psr mutex when performing atomic commit. We don't need to set the CFF bit as selective update configuration in PSR2_MAN_TRL_CTL is not overwritten anymore. I.e. we have valid configuration in PSR2_MAN_TRK_CTL and in plane SEL_FETCH_* registers when SFF bit gets cleared by the HW in case something triggers "frame change" event after SFF bit is cleared. Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-6-jouni.hogander@intel.com
2025-02-13drm/i915/psr: Add register definitions for SFF_CTL and CFF_CTL registersJouni Högander
Add register definitions for SFF_CTL and CFF_CTL registers. Name them as LNL_SFF_CTL and LNL_CFF_CTL. v2: use _MMIO_TRANS instead of _MMIO_TRANS2 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-5-jouni.hogander@intel.com
2025-02-13drm/i915/psr: Split setting sff and cff bits away from intel_psr_force_updateJouni Högander
This is a clean-up and a preparation for adding own SFF and CFF registers for LunarLake onwards. Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-4-jouni.hogander@intel.com
2025-02-13drm/i915/psr: Rename psr_force_hw_tracking_exit as intel_psr_force_updateJouni Högander
psr_force_hw_tracking_exit is misleading name as it is used for PSR1, PSR2 HW tracking and PSR2 selective fetch. Due to this rename it as intel_psr_force_update. Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-3-jouni.hogander@intel.com
2025-02-13drm/i915/psr: Use PSR2_MAN_TRK_CTL CFF bit only to send full updateJouni Högander
We are preparing for a change where only frontbuffer flush will use single full frame bit of a new register (SFF_CTL) available on LunarLake onwards. It shouldn't be necessary to have SFF bit set if CFF bit is set in PSR2_MAN_TRK_CTL -> removing setting it on all platforms as there is not reason to have it different on older platforms. v2: commit message improved Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-2-jouni.hogander@intel.com
2025-02-13drm/i915/selftests: use prandom in selftestMarkus Theil
This is part of a prandom cleanup, which removes next_pseudo_random32 and replaces it with the standard PRNG. Signed-off-by: Markus Theil <theil.markus@gmail.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250211063332.16542-2-theil.markus@gmail.com
2025-02-13drm/i915/display: convert i915_pipestat_enable_mask() to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert i915_pipestat_enable_mask() to struct intel_display, allowing further conversions elsewhere. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/975b382c703cfb62f24643e40eac247b8e8bbea8.1739378096.git.jani.nikula@intel.com
2025-02-13drm/i915/display: convert intel_fifo_underrun.[ch] to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert as much as possible of intel_fifo_underrun.[ch] to struct intel_display. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/682e667013e1726a6f2f78484b7e9618cee3b639.1739378096.git.jani.nikula@intel.com
2025-02-13drm/i915/combo-phy: convert intel_combo_phy.[ch] to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert as much as possible of intel_combo_phy.[ch] to struct intel_display, along with intel_phy_is_combo() in intel_display.c. Drive-by convert some drm_dbg() to drm_dbg_kms() while at it. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c2e0a6294a8eaa4c16632881edc4f2d23c576101.1739378096.git.jani.nikula@intel.com
2025-02-13drm/i915/dsi: convert platform checks to display->platform.<platform> styleJani Nikula
These are stragglers from a time the display->platform mechanism didn't exist. Finish the conversion. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/493e4c550f9c515e2e82df1afd8a74a24156e76e.1739378096.git.jani.nikula@intel.com
2025-02-13drm/i915/display: convert intel_mode_valid_max_plane_size() to intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert the intel_mode_valid_max_plane_size() helper to struct intel_display, allowing further conversions elsewhere. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6e7810c793ecc8ff6a31569830bf162156245668.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/display: convert intel_cpu_transcoder_mode_valid() to intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert the intel_cpu_transcoder_mode_valid()() helper to struct intel_display, allowing further conversions elsewhere. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f9246a00a2e7aabaffb86f863915a4307e1fd3f8.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/sdvo: convert intel_sdvo.[ch] to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert as much as possible of intel_sdvo.[ch] to struct intel_display. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2e79909f8a060d7ff1744911f8da9300eb1f225c.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/display: convert intel_set_{cpu,pch}_fifo_underrun_reporting() to ↵Jani Nikula
intel_display Going forward, struct intel_display is the main display device data pointer. Convert intel_set_cpu_fifo_underrun_reporting() and intel_set_pch_fifo_underrun_reporting() to struct intel_display, along with some of the call chains from there. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3b984d0183214d05d0cdecad35184ea8d89ae050.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/hpd: drop dev_priv parameter from intel_hpd_pin_default()Jani Nikula
The function doesn't use the parameter for anything. Drop it. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4347a0f71a1a8c515617cf06471486d9bbb4a026.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/display: convert assert_port_valid() to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert the assert_port_valid() helper to struct intel_display, allowing further conversions elsewhere. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e06ef0e2cc34d42918f3208362587a17ea34e28f.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/display: convert assert_transcoder*() to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert the assert_transcoder*() helpers to struct intel_display, allowing further conversions elsewhere. Do a few small opportunistic conversions right away. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/430c2f3c899bc98beeb6ba8608f841c9271d0971.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/ips: convert hsw_ips.c to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert as much as possible of hsw_ips.c to struct intel_display. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ebea40784fca6cfb4dbacec570bc9bef49393fc1.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/hdmi: convert g4x_hdmi.[ch] to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert as much as possible of g4x_hdmi.[ch] to struct intel_display. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4fbaaa4cdab8ec020e5b3fb2f615b3c244c9da2d.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/dp: convert g4x_dp.[ch] to struct intel displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert as much as possible of g4x_dp.[ch] to struct intel_display. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/89ce4f7e6aa31f3db6316537f54c5bc7df852322.1739378095.git.jani.nikula@intel.com
2025-02-12drm/i915/dsb: Decode DSB error interruptsVille Syrjälä
Decode the DSB error interrupts into human readable form for easier debugging. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-9-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2025-02-12drm/i915/vrr: Check that the push send bit is clear after delayed vblankVille Syrjälä
Since we don't do mailbox updates the push send bit should alwyas clear by the time the delay vblank fires and the flip completes. Check for that to make sure we haven't screwed up the sequencing/vblank evasion/etc. On the DSB path we should be able to guarantee this since we don't have to deal with any scheduler latencies and whatnot. I suppose unexpected DMA/memory latencies might be the only thing that might trip us up here. For the MMIO path we do always have a non-zero chance that vblank evasion fails (since we can't really guarantee anything about the scheduling behaviour). That could trip up this check, but that seems fine since we already print errors for other types of vblank evasion failures. Should the CPU vblank evasion actually fail, then the push send bit can still be set when the next commit happens. But both the DSB and MMIO paths should handle that situation gracefully. v2: Only check once instead of polling for two scanlines since we should now be guaranteed to be past the delayed vblank. Also check in the MMIO path for good measure v3: Skip the push send check when VRR is disabled. With joiner the secondary pipe's DSBs doen't have access to the transcoder registers, and so doing this check there triggers a reponse timeout error on the DSB. VRR is not currently allowed when using joiner, so this will prevent the bogus register access. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250210160711.24010-1-ville.syrjala@linux.intel.com
2025-02-12drm/i915/vrr: Reorder the DSB "wait for safe window" vs. TRANS_PUSHVille Syrjälä
Currently we trigger the push send first, then follow it with a "wait for safe window". That approach no longer works on PTL+ because triggering the push send immediately ends the safe window. On prior hardware the safe window extended past the push being sent (presumably all the way to the pipe's delayed vblank). In order to deal with the new hardware behaviour we must reverse the order of these two operations: first wait for safe window, then trigger the push. The only slight danger with this approach is that if we mess up the vblank evasion around the vmax decision boundary the push might get postponed until after the next frame's vactive. But assuming we don't mess up the vblank evasion this approach is completely safe. As a slight bonus we can perform the push after we've done the LUT writes as well, meaning we no longer have to worry about extending the vblank delay to provide enough time for LUT programming. Instead we will now depend on the vblank evasion at vmax decision boundary to guarantee this. However vblank delay (or framestart delay) is still the only way to provide extra time for the LUT programming in the non-VRR use cases. Let's assume we don't need anything extra for now, but eventually we should come up with some proper estimates on how long the LUT programming can take and configure the vblank delay accordingly for the non-VRR use cases. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-7-ville.syrjala@linux.intel.com
2025-02-12drm/i915/dsb: Introduce intel_dsb_poll()Ville Syrjälä
Add a function for emitting a DSB poll instruction. We'll allow the caller to specify the poll parameters. v2: s/wait/wait_us/ (Ankit) Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-6-ville.syrjala@linux.intel.com
2025-02-12drm/i915/dsb: Compute use_dsb earlierVille Syrjälä
Skip all the commit completion interrupt stuff on the chained DSB when we don't take the full DSB path (ie. when the plane/pipe programming is done via MMIO). The commit completion will be done via the CPU side vblank interrupt. Currently this is just a redundant interrupt, so not a big deal. But in the future we'll be moving the TRANS_PUSH write into the chained DSB as well, and that we definitely don't want to do when it's also being done by the CPU from intel_pipe_update_end(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-5-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2025-02-12drm/i915/vrr: Account for TRANS_PUSH delayVille Syrjälä
When we send a push during vblank the TRANS_PUSH write happens at some point during a scanline, and the hardware picks it up on the next scanline. Thus there is up to one extra scanline of delay between the TRANS_PUSH write and the delayed vblank triggering. Account for that during intel_dsb_wait_vblank_delay() so that we are guaranteed to be past the delayed vblank before we trigger the completion interrupt for the commit. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-4-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2025-02-12drm/i915/vrr: Don't send push for legacy cursor updatesVille Syrjälä
We don't really want legacy cursor updates to trigger VRR pushes because these can happen willy nilly and we generally want more precise control over the pushes. The fastpath in intel_legacy_cursor_update() doesn't send pushes, but if we punt to the full commit path (with the flip completion short circuited) we are currently sending pushes. Skip those as well so that they don't interfere with the push handling from normal commits. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-3-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2025-02-12drm/i915/dsb: Move the +1 usec adjustment into dsb_wait_usec()Ville Syrjälä
The "wait usec" DSB command doesn't quite seem to able to guarantee that it always waits at least the specified amount of usecs. Some of that could be just because it supposedly just does some kind of dumb timestamp comparison internally. But I also see cases where two hardware timestamps sampled on each side of the "wait usec" command come out one less than expected. So it looks like we always need at least a +1 to guarantee that we never wait less than specified. Always apply that adjustment in dsb_wait_usec(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-2-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2025-02-12drm/i915/pch: Remove unused i915->pch_idJani Nikula
With the PCH checks based on PCH types instead of IDs, the i915->pch_id member has become unused. Remove it. Reviewed-by: Nemesa Garg <nemesa.garg@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/fac1c59800128e8f398e83d718a3a5dc235d0526.1738923308.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-12drm/i915/pch: Hide PCH device IDsJani Nikula
Only the PCH identification code needs the PCH device IDs, as all the PCH checks are now based on PCH type. Hide the PCH device IDs inside intel_pch.c. Remove the unused INTEL_PCH_ID() macro while at it. Reviewed-by: Nemesa Garg <nemesa.garg@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d1ceb9fc461cf21e1b885a55293f593eba1458ea.1738923308.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-12drm/i915/pch: Make LPT LP a dedicated PCH typeJani Nikula
Add PCH type PCH_LPT_LP and rename PCH_LPT to PCH_LPT_H for consistency. Keep the existing HAS_PCH_LPT*() macros, but express them in terms of the PCH types instead of looking at the device IDs directly. This makes the PCH checks independent of the PCH device IDs. Reviewed-by: Nemesa Garg <nemesa.garg@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/777b63f50b10fba1d768af25870e81b33267bdc8.1738923308.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-12drm/i915/dpll: Replace all other leftover drm_i915_privateSuraj Kandpal
Replace all other left over drm_i915_private with intel_display in dpll_mgr.c. --v2 -Don't use inline to_intel_display() [Jani] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-9-suraj.kandpal@intel.com
2025-02-12drm/i915/dpll: Accept intel_display as argument for shared_dpll_initSuraj Kandpal
Use intel_display as an argument for intel_shared_dpll_init() and replace drm_i915_private in function wherever possible. While at it prefer using display->platform.xx over IS_PLATFORM. Initialize dpio_phy and dpio_channel since with IS_GEMINILAKE() and IS_BROXTON() compiler knows it will return false for xe but since display->platform.xx is a runtime check which means the compiler sees a potential path where uninitialized variables could be accessed and raises a warning. --v2 -Amend commit message to explain why some variables were initialized [Jani] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-8-suraj.kandpal@intel.com
2025-02-12drm/i915/dpll: Use intel_display for update_refclk hookSuraj Kandpal
Use intel_display instead of drm_i915_private for update_refclk hook. Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-7-suraj.kandpal@intel.com
2025-02-12drm/i915/dpll: Use intel_display for asserting pllSuraj Kandpal
Use intel_display instead of drm_i915_private to assert pll enabled and disabled and the corresponding changes needed to make that happen. Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-6-suraj.kandpal@intel.com
2025-02-12drm/i915/dpll: Use intel_display possible in shared_dpll_mgr hooksSuraj Kandpal
We use intel_display for function hooks of shared_dpll_mgr and any function that gets called when we use for_each_shared_dpll. This also contains some opportunistic display->platform.xx changes all to reductate the use of drm_i915_private. --v2 -rebase --v3 -Don't use inline to_i915 [Jani] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-5-suraj.kandpal@intel.com
2025-02-12drm/i915/dpll: Use intel_display for dpll dump and compare hw stateSuraj Kandpal
Let's use intel_display for dpll dump and compare hw state. This also helps elimanate drm_i915_private dependency from i915_shared_dplls_info in intel_display_debugfs.c --v2 -Fix commit message [Jani] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-4-suraj.kandpal@intel.com
2025-02-12drm/i915/dpll: Change param to intel_display in for_each_shared_dpllSuraj Kandpal
Change the argument of for_each_shared_dpll to take intel_display which helps move as an ongoing effort to get rid off the dependency on drm_i915_private. Some opportunistic changes in intel_pch_refclk done too. --v2 -Prefer using &i915->display [Jani] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-3-suraj.kandpal@intel.com
2025-02-12drm/i915: Use intel_display wherever possibleSuraj Kandpal
Use struct intel_display wherever possible in intel_display_debug_fs.c to reduce the use of drm_i915_private. While at it do the opportunistic display->platform.xx replacement. --v2 -Rebase --v3 -Don't use inline to_intel_display [Jani] -Don't use display debug fs as subject prefix [Jani] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-2-suraj.kandpal@intel.com
2025-02-11drm/i915: Continue intel_display_power struct intel_display conversionVille Syrjälä
Convert the remaining intel_display_power.h interfaces to take struct intel_display instead of struct drm_i915_private. intel_display_power.c still has some internal uses due to i915->runtime_pm. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250211000135.6096-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-02-11drm/i915: Fix CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n buildVille Syrjälä
Looks like I missed one of myriad CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n special cases when converting the intel_display_power_{get,put}() code to use struct intel_display. Only noticed after the fact when building a EXPERT=n kernel :/ Fixes: 5dcfda5cfa42 ("drm/i915: Convert intel_display_power_{get,put}*() to intel_display") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250211000135.6096-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-02-11selftests: i915: Use struct_size() helper in kmalloc()luoqing
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Signed-off-by: luoqing <luoqing@kylinos.cn> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250208013539.3586855-1-l1138897701@163.com
2025-02-10drm/i915: Pimp plane debugsVille Syrjälä
Include the standard "[PLANE:%d:s]" stuff in all plane debugs (or rather all I was able to find), to provide better information on which plane we're actually talking about. There are a few spots where we care about the CRTC as well, so include that where appropriate. Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250206185533.32306-13-ville.syrjala@linux.intel.com
2025-02-10drm/i915: Use DRM_RECT_FMT & co. for plane debugsVille Syrjälä
Switch the plane debugs to use DRM_RECT_FMT & co. instead of drm_rect_debug_print() so that the debugs go on the same line. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250206185533.32306-12-ville.syrjala@linux.intel.com
2025-02-10drm/i915: Convert skl_univeral_plane.c to struct intel_displayVille Syrjälä
struct intel_display will replace struct drm_i915_private as the main thing for display code. Convert the skl+ universal plane code to use it. Note that we still have two straggles in the form on HAS_FLAT_CCS() and the pxp stuff. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250206185533.32306-11-ville.syrjala@linux.intel.com
2025-02-10drm/i915: Convert intel_cursor.c to struct intel_displayVille Syrjälä
struct intel_display will replace struct drm_i915_private as the main thing for display code. Convert the cursor code to use it. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250206185533.32306-10-ville.syrjala@linux.intel.com
generated by cgit (git 2.34.1) at 2025-07-19 19:32:51 +0000