summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm
AgeCommit message (Collapse)Author
2025-05-12drm/msm/dp: Introduce link training per-segment for LTTPRsAleksandrs Vinarskis
DisplayPort requires per-segment link training when LTTPR are switched to non-transparent mode, starting with LTTPR closest to the source. Only when each segment is trained individually, source can link train to sink. Implement per-segment link traning when LTTPR(s) are detected, to support external docking stations. On higher level, changes are: * Pass phy being trained down to all required helpers * Run CR, EQ link training per phy * Set voltage swing, pre-emphasis levels per phy Since at least some LTTPRs (eg. Parade PS8830) do not correctly report voltage-swing, pre-emphasis level 3 support, always assume level 3 is supported. This is permitted under DP 2.1(a) section 3.6.7.2 stating that LTTPR shall set its transmitter levels as close as possible to those requested by the DPTX, if the DPTX sets the voltage swing or pre-emphasis to a level that the LTTPR does not support. It shall be noted that LTTPR’s level choosing is implementation-specific. This ensures successful link training both when connected directly to the monitor (single LTTPR onboard most X1E laptops) and via the docking station (at least two LTTPRs). Fixes: 72d0af4accd9 ("drm/msm/dp: Add support for LTTPR handling") Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P Tested-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Rob Clark <robdclark@gmail.com> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/652305/ Link: https://lore.kernel.org/r/20250507230113.14270-5-alex.vinarskis@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dp: Prepare for link training per-segment for LTTPRsAleksandrs Vinarskis
Per-segment link training requires knowing the number of LTTPRs (if any) present. Store the count during LTTPRs' initialization. Fixes: 72d0af4accd9 ("drm/msm/dp: Add support for LTTPR handling") Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P Tested-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/652306/ Link: https://lore.kernel.org/r/20250507230113.14270-4-alex.vinarskis@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dp: Account for LTTPRs capabilitiesAleksandrs Vinarskis
Take into account LTTPR capabilities when selecting maximum allowed link rate, number of data lines. Fixes: 72d0af4accd9 ("drm/msm/dp: Add support for LTTPR handling") Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P Tested-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/652302/ Link: https://lore.kernel.org/r/20250507230113.14270-3-alex.vinarskis@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dp: Fix support of LTTPR initializationAleksandrs Vinarskis
Initialize LTTPR before msm_dp_panel_read_sink_caps, as DPTX shall (re)read DPRX caps after LTTPR detection, as required by DP 2.1a, Section 3.6.7.6.1. Fixes: 72d0af4accd9 ("drm/msm/dp: Add support for LTTPR handling") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P Tested-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/652301/ Link: https://lore.kernel.org/r/20250507230113.14270-2-alex.vinarskis@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: remove DPU_CTL_SPLIT_DISPLAY from SAR2130P CTL blocksDmitry Baryshkov
Follow the changes in the commit a2649952f66e ("drm/msm/dpu: remove DPU_CTL_SPLIT_DISPLAY from CTL blocks on DPU >= 5.0") and remove DPU_CTL_SPLIT_DISPLAY from the CTL blocks on the SAR2130P platform. Single CTL is used for all interfaces used by a single path Fixes: 178575173472 ("drm/msm/dpu: add catalog entry for SAR2130P") Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/651883/ Link: https://lore.kernel.org/r/20250506-dpu-sar2130p-no-split-display-v1-1-b619c0fddea5@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Add handling of LM_6 and LM_7 bits in pending flush maskKrzysztof Kozlowski
MDSS/MDP v12 comes with new bits in flush registers (e.g. MDP_CTL_0_FLUSH) for Layer Mixer 6 and 7. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651260/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-13-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Add LM_7, DSC_[67], PP_[67] and MERGE_3D_5Krzysztof Kozlowski
Add IDs for new blocks present in MDSS/MDP v12 for LM, DSC, PINGPONG and MERGE_3D blocks. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651262/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-12-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Drop useless commentsKrzysztof Kozlowski
Drop comments about SoC before each 'struct dpu_lm_sub_blks' for given SoC because it's duplicating the actual name of structure. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651251/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-11-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE before blend setupKrzysztof Kozlowski
Before blend setup, all existing blend stages are cleared, so shall be active fetch pipes. Fixes: b3652e87c03c ("drm/msm/disp/dpu1: add support to program fetch active in ctl path") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651263/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-10-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE on ctl_path resetKrzysztof Kozlowski
Resetting entire CTL path should also include resetting active fetch pipes. Fixes: e1a950eec256 ("drm/msm/dpu: add reset_intf_cfg operation for dpu_hw_ctl") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651252/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-9-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE on mixer resetKrzysztof Kozlowski
Resetting mixers should also include resetting active fetch pipes. Fixes: ae4d721ce100 ("drm/msm/dpu: add an API to reset the encoder related hw blocks") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651246/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-8-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Add missing "fetch" name to set_active_pipes()Krzysztof Kozlowski
The set_active_pipes() callback configures CTL_FETCH_PIPE_ACTIVE and newer DPU v12.0 comes with CTL_PIPE_ACTIVE, thus rename it to set_active_fetch_pipes() to better match the purpose. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651261/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-7-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: wire in hpd_enable/hpd_disable bridge opsDmitry Baryshkov
The HDMI driver already has msm_hdmi_hpd_enable() and msm_hdmi_hpd_disable() functions. Wire them into the msm_hdmi_bridge_funcs, so that HPD can be enabled and disabled dynamically rather than always having HPD events generation enabled. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-13-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: ensure that HDMI is up if HPD is requestedDmitry Baryshkov
The HDMI block needs to be enabled to properly generate HPD events. Make sure it is not turned off in the disable paths if HPD delivery is enabled. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651722/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-12-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: expand the HDMI_CFG macroDmitry Baryshkov
Expand the HDMI_CFG() macro in HDMI config description. It has no added value other than hiding some boilerplate declarations. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651724/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-11-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: rename hpd_clks to pwr_clksDmitry Baryshkov
As these clocks are now used in the runtime PM callbacks, they have no connection to 'HPD'. Rename corresponding fields to follow clocks purpose, to power up the HDMI controller. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651720/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-10-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: implement proper runtime PM handlingDmitry Baryshkov
It is completely not obvious, but the so-called 'hpd' clocks and regulators are required for the HDMI host to function properly. Merge pwr and hpd regulators. Use regulators, clocks and pinctrl to implement proper runtime PM callbacks. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651715/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-9-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: add runtime PM calls to DDC transfer functionDmitry Baryshkov
We must be sure that the HDMI controller is powered on, while performing the DDC transfer. Add corresponding runtime PM calls to msm_hdmi_i2c_xfer(). Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651727/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-8-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: switch to pm_runtime_resume_and_get()Dmitry Baryshkov
The pm_runtime_get_sync() function is a bad choise for runtime power management. Switch HDMI driver to pm_runtime_resume_and_get() and add proper error handling, while we are at it. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651713/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-7-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: switch to clk_bulk APIDmitry Baryshkov
The last platform using legacy clock names for HDMI block (APQ8064) switched to new clock names in 5.16. It's time to stop caring about old DT, drop hand-coded helpers and switch to clk_bulk_* API. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651716/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-6-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: drop clock frequency assignmentDmitry Baryshkov
The only clock which has frequency being set through hpd_freqs is the "core" aka MDSS_HDMI_CLK clock. It always has the specified frequency, so we can drop corresponding clk_set_rate() call together with the hpd_freq infrastructure. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651717/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-5-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: simplify extp clock handlingDmitry Baryshkov
With the extp being the only "power" clock left, remove the surrounding loops and handle the extp clock directly. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651710/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-4-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: move the alt_iface clock to the hpd listDmitry Baryshkov
According to the vendor kernel [1] , the alt_iface clock should be enabled together with the rest of HPD clocks, to make HPD to work properly. [1] https://git.codelinaro.org/clo/la/kernel/msm-3.18/-/commit/e07a5487e521e57f76083c0a6e2f995414ac6d03 Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651709/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-3-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: convert clock and regulator arrays to const arraysDmitry Baryshkov
As a preparation to the next patches convert 'static const char *' arrays to 'static const char * const', as required by the checkpatch.pl Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/651705/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-2-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-10drm/msm/adreno: Remove MODULE_FIRMWARE()'sRob Clark
The driver handles the case where gpu fw is not in the initrd. OTOH it doesn't always handle the case where _some_ fw is in the initrd, but others are not. In particular the zap fw tends to be signed with an OEM specific key, so the paths/names differ across devices with the same SoC/GPU, so we cannot sanely list them with MODULE_FIRMWARE(). So MODULE_FIRMWARE() just ends up causing problems without actually solving anything. Remove them! Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/652195/
2025-05-10drm/msm/a6xx: Disable rgb565_predicator on Adreno 7c3Konrad Dybcio
This feature is supposed to be enabled with UBWC v4 or later. Implementations of this SKU feature an effective UBWC version of 3, so disable it, in line with the BSP kernel. Reported-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Fixes: 192f4ee3e408 ("drm/msm/a6xx: Add support for Adreno 7c Gen 3 gpu") Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/651759/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-05-04drm/msm/adreno: Add module param to disable ACDAkhil P Oommen
Add a module param to disable ACD which will help to quickly rule it out for any GPU issues. Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com> Tested-by: Anthony Ruhier <aruhier@mailbox.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/649349/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-05-04drm/msm: a6x: Rework qmp_get() error handlingAkhil P Oommen
Fix the following for qmp_get() errors: 1. Correctly handle probe defer for A6x GPUs 2. Ignore other errors because those are okay when GPU ACD is not required. They are checked again during gpu acd probe. Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com> Tested-by: Anthony Ruhier <aruhier@mailbox.org> Patchwork: https://patchwork.freedesktop.org/patch/649346/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-05-04drm/msm/a6xx: Increase HFI response timeoutAkhil P Oommen
When ACD feature is enabled, it triggers some internal calibrations which result in a pretty long delay during the first HFI perf vote. So, increase the HFI response timeout to match the downstream driver. Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com> Tested-by: Anthony Ruhier <aruhier@mailbox.org> Patchwork: https://patchwork.freedesktop.org/patch/649344/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-05-04drm/msm/adreno: Add support for ACDAkhil P Oommen
ACD a.k.a Adaptive Clock Distribution is a feature which helps to reduce the power consumption. In some chipsets, it is also a requirement to support higher GPU frequencies. This patch adds support for GPU ACD by sending necessary data to GMU and AOSS. The feature support for the chipset is detected based on devicetree data. Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com> Tested-by: Anthony Ruhier <aruhier@mailbox.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/649342/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-05-04drm/msm/adreno: Drop fictional address_space_sizeRob Clark
Really the only purpose of this was to limit the address space size to 4GB to avoid 32b rollover problems in 64b pointer math in older sqe fw. So replace the address_space_size with a quirk limiting the address space to 4GB. In all other cases, use the SMMU input address size (IAS) to determine the address space size. v2: Properly account for vm_start Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/649467/
2025-05-04drm/msm: Be more robust when HFI response times outConnor Abbott
If the GMU takes too long to respond to an HFI message, we may return early. If the GMU does eventually respond, and then we send a second message, we will see the response for the first, throw another error, and keep going. But we don't currently wait for the interrupt from the GMU again, so if the second response isn't there immediately we may prematurely return. This can cause a continuous cycle of missed HFI messages, and for reasons I don't quite understand the GMU does not shut down properly when this happens. Fix this by waiting for the GMU interrupt when we see an empty queue. If the GMU never responds then the queue really is empty and we quit. We can't wait for the interrupt when we see a wrong response seqnum because the GMU might have already queued both responses by the time we clear the interrupt the first time so we do need to check the queue before waiting on the interrupt again. Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/650013/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-05-04drm/msm/gpu: Fix crash when throttling GPU immediately during bootStephan Gerhold
There is a small chance that the GPU is already hot during boot. In that case, the call to of_devfreq_cooling_register() will immediately try to apply devfreq cooling, as seen in the following crash: Unable to handle kernel paging request at virtual address 0000000000014110 pc : a6xx_gpu_busy+0x1c/0x58 [msm] lr : msm_devfreq_get_dev_status+0xbc/0x140 [msm] Call trace: a6xx_gpu_busy+0x1c/0x58 [msm] (P) devfreq_simple_ondemand_func+0x3c/0x150 devfreq_update_target+0x44/0xd8 qos_max_notifier_call+0x30/0x84 blocking_notifier_call_chain+0x6c/0xa0 pm_qos_update_target+0xd0/0x110 freq_qos_apply+0x3c/0x74 apply_constraint+0x88/0x148 __dev_pm_qos_update_request+0x7c/0xcc dev_pm_qos_update_request+0x38/0x5c devfreq_cooling_set_cur_state+0x98/0xf0 __thermal_cdev_update+0x64/0xb4 thermal_cdev_update+0x4c/0x58 step_wise_manage+0x1f0/0x318 __thermal_zone_device_update+0x278/0x424 __thermal_cooling_device_register+0x2bc/0x308 thermal_of_cooling_device_register+0x10/0x1c of_devfreq_cooling_register_power+0x240/0x2bc of_devfreq_cooling_register+0x14/0x20 msm_devfreq_init+0xc4/0x1a0 [msm] msm_gpu_init+0x304/0x574 [msm] adreno_gpu_init+0x1c4/0x2e0 [msm] a6xx_gpu_init+0x5c8/0x9c8 [msm] adreno_bind+0x2a8/0x33c [msm] ... At this point we haven't initialized the GMU at all yet, so we cannot read the GMU registers inside a6xx_gpu_busy(). A similar issue was fixed before in commit 6694482a70e9 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy"): msm_devfreq_init() does call devfreq_suspend_device(), but unlike msm_devfreq_suspend(), it doesn't set the df->suspended flag accordingly. This means the df->suspended flag does not match the actual devfreq state after initialization and msm_devfreq_get_dev_status() will end up accessing GMU registers, causing the crash. Fix this by setting df->suspended correctly during initialization. Cc: stable@vger.kernel.org Fixes: 6694482a70e9 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy") Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/650772/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-05-02drm/msm/dsi: add DSI support for SA8775PAyushi Makhija
Add DSI Controller v2.5.1 support for SA8775P SoC. Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com> Reviewed-by: Dmitry Baryshkov <lumag@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/651433/ Link: https://lore.kernel.org/r/20250424062431.2040692-6-quic_amakhija@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-02drm/msm/dsi: add DSI PHY configuration on SA8775PAyushi Makhija
The SA8775P SoC uses the 5nm (v4.2) DSI PHY driver with different enable regulator load. Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com> Reviewed-by: Dmitry Baryshkov <lumag@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/649842/ Link: https://lore.kernel.org/r/20250424062431.2040692-5-quic_amakhija@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-02drm/msm/dp: reuse generic HDMI codec implementationDmitry Baryshkov
The MSM DisplayPort driver implements several HDMI codec functions in the driver, e.g. it manually manages HDMI codec device registration, returning ELD and plugged_cb support. In order to reduce code duplication reuse drm_hdmi_audio_* helpers and drm_bridge_connector integration. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/649728/ Link: https://lore.kernel.org/r/20250423-dp-hdmi-audio-v7-1-8407a23e55b2@oss.qualcomm.com
2025-05-02drm/msm/dpu: remove DSC feature bit for PINGPONG on SDM630Dmitry Baryshkov
The SDM630 platform doesn't have DSC blocks nor does have it DSC registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit from the PINGPONG's feature mask, replacing PINGPONG_SDM845_MASK with BIT(DPU_PINGPONG_DITHER). Fixes: 7204df5e7e68 ("drm/msm/dpu: add support for SDM660 and SDM630 platforms") Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/640308/ Link: https://lore.kernel.org/r/20250301-dpu-fix-catalog-v2-5-498271be8b50@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-02drm/msm/dpu: drop TE2 definitionsDmitry Baryshkov
Neither DPU driver nor vendor SDE driver do not use TE2 definitions (and, in case of SDE driver, never did). Semantics of the TE2 feature bit and .te2 sblk are not completely clear. Drop these bits from the catalog with the possibility of reintroducing them later if we need to support ppsplit. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/640305/ Link: https://lore.kernel.org/r/20250301-dpu-fix-catalog-v2-4-498271be8b50@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-02drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8953Dmitry Baryshkov
The MSM8953 platform doesn't have DSC blocks nor does have it DSC registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit from the PINGPONG's feature mask and, as it is the only remaining bit, drop the .features assignment completely. Fixes: 7a6109ce1c2c ("drm/msm/dpu: Add support for MSM8953") Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/640303/ Link: https://lore.kernel.org/r/20250301-dpu-fix-catalog-v2-3-498271be8b50@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-02drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8917Dmitry Baryshkov
The MSM8917 platform doesn't have DSC blocks nor does have it DSC registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit from the PINGPONG's feature mask and, as it is the only remaining bit, drop the .features assignment completely. Fixes: 62af6e1cb596 ("drm/msm/dpu: Add support for MSM8917") Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/640301/ Link: https://lore.kernel.org/r/20250301-dpu-fix-catalog-v2-2-498271be8b50@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-02drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8937Dmitry Baryshkov
The MSM8937 platform doesn't have DSC blocks nor does have it DSC registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit from the PINGPONG's feature mask and, as it is the only remaining bit, drop the .features assignment completely. Fixes: c079680bb0fa ("drm/msm/dpu: Add support for MSM8937") Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/640299/ Link: https://lore.kernel.org/r/20250301-dpu-fix-catalog-v2-1-498271be8b50@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-02drm/msm/hdmi: use new helper for ACR tablesDmitry Baryshkov
Use new drm_hdmi_acr_get_n_cts() helper instead of hand-coding the tables. Instead of storing the rate 'index', store the audio sample rate in hdmi->audio.rate, removing the need for even more defines. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/647507/ Link: https://lore.kernel.org/r/20250408-drm-hdmi-acr-v2-3-dee7298ab1af@oss.qualcomm.com
2025-05-02drm/msm/hdmi: move msm_hdmi_audio_update() out of msm_hdmi_set_timings()Dmitry Baryshkov
There is a duplication between msm_hdmi_audio_update() calls in msm_hdmi_set_timings() and msm_hdmi_bridge_atomic_pre_enable(). Merge those two calls to be performed unconditionally at msm_hdmi_bridge_atomic_pre_enable(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/647505/ Link: https://lore.kernel.org/r/20250408-drm-hdmi-acr-v2-2-dee7298ab1af@oss.qualcomm.com
2025-05-02drm/msm/dpu: add catalog entry for SAR2130PDmitry Baryshkov
Add DPU driver support for the Qualcomm SAR2130P platform. It is mostly the same as SM8550, minor differences in the CDP configuration. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/649258/ Link: https://lore.kernel.org/r/20250418-sar2130p-display-v5-8-442c905cb3a4@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-02drm/msm/dsi/phy: add configuration for SAR2130PDmitry Baryshkov
Qualcomm SAR2130P requires slightly different setup for the DSI PHY. It is a 5nm PHY (like SM8450), so supplies are the same, but the rest of the configuration is the same as SM8550 DSI PHY. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/649257/ Link: https://lore.kernel.org/r/20250418-sar2130p-display-v5-7-442c905cb3a4@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-02drm/msm/mdss: add SAR2130P device configurationDmitry Baryshkov
Add compatible and device configuration for the Qualcomm SAR2130P platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/649256/ Link: https://lore.kernel.org/r/20250418-sar2130p-display-v5-6-442c905cb3a4@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-02drm/msm/dpu: rename non-SmartDMA feature masks to be more explicitDmitry Baryshkov
It is easy to skip or ignore the fact that the default SSPP feature masks for SDM845+ don't include the SmartDMA bit (both during development and during the review stage). Rename SSPP feature masks to make it more explicit that using non-SmartDMA masks should not be an exception rather than the rule. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/650425/ Link: https://lore.kernel.org/r/20250425-dpu-rework-vig-masks-v2-5-c71900687d08@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-02drm/msm/dpu: enable SmartDMA on SM8550Dmitry Baryshkov
In order to support more versatile configuration of the display pipes on SM8550, enable SmartDMA for this platform. Patchwork: https://patchwork.freedesktop.org/patch/650424/ Link: https://lore.kernel.org/r/20250425-dpu-rework-vig-masks-v2-4-c71900687d08@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-02drm/msm/dpu: enable SmartDMA on SC8280XPDmitry Baryshkov
In order to support more versatile configuration of the display pipes on SC8280XP, enable SmartDMA for this platform. Patchwork: https://patchwork.freedesktop.org/patch/650420/ Link: https://lore.kernel.org/r/20250425-dpu-rework-vig-masks-v2-3-c71900687d08@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-02drm/msm/dpu: enable SmartDMA on SC8180XDmitry Baryshkov
Reworking of the catalog dropped the SmartDMA feature bit on the SC8180X platform. Renable SmartDMA support on this SoC. Fixes: 460c410f02e4 ("drm/msm/dpu: duplicate sdm845 catalog entries") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/650421/ Link: https://lore.kernel.org/r/20250425-dpu-rework-vig-masks-v2-2-c71900687d08@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
generated by cgit (git 2.34.1) at 2025-07-15 22:49:26 +0000