| Age | Commit message (Collapse) | Author |
|---|
|
When configuring the timing of DSI hosts (interfaces) in
dsi_timing_setup() all values written to registers are taking
bonded-mode into account by dividing the original mode width by 2
(half the data is sent over each of the two DSI hosts), but the full
width instead of the interface width is passed as hdisplay parameter to
dsi_update_dsc_timing().
Currently only msm_dsc_get_slices_per_intf() is called within
dsi_update_dsc_timing() with the `hdisplay` argument which clearly
documents that it wants the width of a single interface (which, again,
in bonded DSI mode is half the total width of the mode) resulting in all
subsequent values to be completely off.
However, as soon as we start to pass the halved hdisplay
into dsi_update_dsc_timing() we might as well discard
msm_dsc_get_slices_per_intf() since the value it calculates is already
available in dsc->slice_count which is per-interface by the current
design of MSM DPU/DSI implementations and their use of the DRM DSC
helpers.
Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/637648/
Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-1-913100d6103f@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Kernel core already prints detailed report about memory allocation
failures, so drivers should not have their own error messages.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/637308/
Link: https://lore.kernel.org/r/20250214-drm-msm-cleanups-v2-4-1bec50f37dc1@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Cleanup few obvious kernel coding style violations: missing or
unnecessary braces in 'if-else', unnecessary break lines, incorrect
breaking of long function declarations, unnecessary 'else' after a
'return'. No functional impact expected.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/637305/
Link: https://lore.kernel.org/r/20250214-drm-msm-cleanups-v2-3-1bec50f37dc1@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
dsi_get_config(), dsi_clk_init() and msm_dsi_host_init() are called only
from platform driver probe function, so using dev_err_probe() is both
appropriate and beneficial:
- Properly marks device deferred probe status,
- Avoids dmesg flood on probe deferrals,
- Already incorporates printing ERR value,
- Shows device name (in contrast to pr_err()),
- Makes code smaller and simpler.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/637306/
Link: https://lore.kernel.org/r/20250214-drm-msm-cleanups-v2-2-1bec50f37dc1@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
dsi_clk_init(), which gets the clocks, is called only through platform
driver probe and its failure is a failure of the probe. Therefore
NULL-ifying specific clocks is pointless and redundant - the PTR_ERR
value stored there won't be used/dereferenced afterwards. What's more,
variant-specific clock init calls like dsi_clk_init_6g_v2() are not
doing this cleanup. Dropping redundant code allows later to make this a
bit simpler.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/637303/
Link: https://lore.kernel.org/r/20250214-drm-msm-cleanups-v2-1-1bec50f37dc1@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Since SM8250 all downstream sources program clock inverters in
PLL_CLOCK_INVERTERS_1 register and leave the PLL_CLOCK_INVERTERS as
reset value (0x0). The most recent Hardware Programming Guide for 3 nm,
4 nm, 5 nm and 7 nm PHYs also mention PLL_CLOCK_INVERTERS_1.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/634489/
Link: https://lore.kernel.org/r/20250129115504.40080-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Use the header with clock IDs to bind the interface between driver and
DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/634149/
Link: https://lore.kernel.org/r/20250127132105.107138-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
As a preparation for calling dpu_encoder_get_topology() from different
code paths, simplify its calling interface, obtaining some data pointers
internally instead passing them via arguments.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/633396/
Link: https://lore.kernel.org/r/20250123-drm-dirty-modeset-v2-3-bbfd3a6cd1a4@linaro.org
|
|
As a preparation for calling dpu_encoder_get_topology() from different
places, move the code setting topology->needs_cdm to that function
(instead of patching topology separately).
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/633395/
Link: https://lore.kernel.org/r/20250123-drm-dirty-modeset-v2-2-bbfd3a6cd1a4@linaro.org
|
|
The driver isn't supposed to consult crtc_state->active/active_check for
resource allocation. Instead all resources should be allocated if
crtc_state->enabled is set. Stop consulting active / active_changed in
order to determine whether the hardware resources should be
(re)allocated.
Fixes: ccc862b957c6 ("drm/msm/dpu: Fix reservation failures in modeset")
Reported-by: Simona Vetter <simona.vetter@ffwll.ch>
Closes: https://lore.kernel.org/dri-devel/ZtW_S0j5AEr4g0QW@phenom.ffwll.local/
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/633393/
Link: https://lore.kernel.org/r/20250123-drm-dirty-modeset-v2-1-bbfd3a6cd1a4@linaro.org
|
|
Some SoCs such as SC7280 (used in the Fairphone 5) have only a single
DSC "hard slice" encoder. The current hardcoded use of 2:2:1 topology
(2 LM and 2 DSC for a single interface) make it impossible to use
Display Stream Compression panels with mainline, which is exactly what's
installed on the Fairphone 5.
By loosening the hardcoded `num_dsc = 2` to fall back to `num_dsc =
1` when the catalog only contains one entry, we can trivially support
this phone and unblock further panel enablement on mainline. A few
more supporting changes in this patch ensure hardcoded constants of 2
DSC encoders are replaced to count or read back the actual number of
DSC hardware blocks that are enabled for the given virtual encoder.
Likewise DSC_MODE_SPLIT_PANEL can no longer be unconditionally enabled.
Cc: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Tested-by: Danila Tikhonov <danila@jiaxyga.com>
Patchwork: https://patchwork.freedesktop.org/patch/633318/
Link: https://lore.kernel.org/r/20250122-dpu-111-topology-v2-1-505e95964af9@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/632406/
Link: https://lore.kernel.org/r/20250114191724.861601-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
In few places we store 'phys_enc->hw_ctl' to local 'ctl' variable so use
it everywhere. No functional change.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/632389/
Link: https://lore.kernel.org/r/20250114155959.583889-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
On the SM6150 platform there is WB_2 block. Add it to the SM6150 catalog.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Fange Zhang <quic_fangez@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/632337/
Link: https://lore.kernel.org/r/20250114-add-writeback-support-for-sm6150-v2-1-d707b31aad5c@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Link Training Tunable PHY Repeaters (LTTPRs) are defined in DisplayPort
1.4a specification. As the name suggests, these PHY repeaters are
capable of adjusting their output for link training purposes.
According to the DisplayPort standard, LTTPRs have two operating
modes:
- non-transparent - it replies to DPCD LTTPR field specific AUX
requests, while passes through all other AUX requests
- transparent - it passes through all AUX requests.
Switching between these two modes is done by the DPTX by issuing
an AUX write to the DPCD PHY_REPEATER_MODE register.
The msm DP driver is currently lacking any handling of LTTPRs.
This means that if at least one LTTPR is found between DPTX and DPRX,
the link training would fail if that LTTPR was not already configured
in transparent mode.
The section 3.6.6.1 from the DisplayPort v2.0 specification mandates
that before link training with the LTTPR is started, the DPTX may place
the LTTPR in non-transparent mode by first switching to transparent mode
and then to non-transparent mode. This operation seems to be needed only
on first link training and doesn't need to be done again until device is
unplugged.
It has been observed on a few X Elite-based platforms which have
such LTTPRs in their board design that the DPTX needs to follow the
procedure described above in order for the link training to be successful.
So add support for reading the LTTPR DPCD caps to figure out the number
of such LTTPRs first. Then, for platforms (or Type-C dongles) that have
at least one such an LTTPR, set its operation mode to transparent mode
first and then to non-transparent, just like the mentioned section of
the specification mandates.
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250203-drm-dp-msm-add-lttpr-transparent-mode-set-v5-4-c865d0e56d6e@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Backmerge Linux 6.14-rc4 at the request of tzimmermann so misc-next
can base on rc4.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.14-rc4
Display:
* More catalog fixes:
- to skip watchdog programming through top block if its not present
- fix the setting of WB mask to ensure the WB input control is programmed
correctly through ping-pong
- drop lm_pair for sm6150 as that chipset does not have any 3dmerge block
* Fix the mode validation logic for DP/eDP to account for widebus (2ppc)
to allow high clock resolutions
* Fix to disable dither during encoder disable as otherwise this was
causing kms_writeback failure due to resource sharing between
* WB and DSI paths as DSI uses dither but WB does not
* Fixes for virtual planes, namely to drop extraneous return and fix
uninitialized variables
* Fix to avoid spill-over of DSC encoder block bits when programming
the bits-per-component
* Fixes in the DSI PHY to protect against concurrent access of
PHY_CMN_CLK_CFG regs between clock and display drivers
Core/GPU:
* Fix non-blocking fence wait incorrectly rounding up to 1 jiffy timeout
* Only print GMU fw version once, instead of each time the GPU resumes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtt2AODBXdod8ULXcAygf_qYvwRDVeUVtODx=2jErp6cA@mail.gmail.com
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_post_disable hook prototype to
pass it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-5-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_disable hook prototype to pass
it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-4-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_enable hook prototype to pass it
directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-3-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/2689e1ad4105f415ce8cd9e426873d9ac479dc36.1738746904.git.namcao@linutronix.de
|
|
PHY_CMN_CLK_CFG1 register has four fields being used in the driver: DSI
clock divider, source of bitclk and two for enabling the DSI PHY PLL
clocks.
dsi_7nm_set_usecase() sets only the source of bitclk, so should leave
all other bits untouched. Use newly introduced
dsi_pll_cmn_clk_cfg1_update() to update respective bits without
overwriting the rest.
While shuffling the code, define and use PHY_CMN_CLK_CFG1 bitfields to
make the code more readable and obvious.
Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637380/
Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-3-0943b850722c@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
PHY_CMN_CLK_CFG1 register is updated by the PHY driver and by a mux
clock from Common Clock Framework:
devm_clk_hw_register_mux_parent_hws(). There could be a path leading to
concurrent and conflicting updates between PHY driver and clock
framework, e.g. changing the mux and enabling PLL clocks.
Add dedicated spinlock to be sure all PHY_CMN_CLK_CFG1 updates are
synchronized.
While shuffling the code, define and use PHY_CMN_CLK_CFG1 bitfields to
make the code more readable and obvious.
Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637378/
Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-2-0943b850722c@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
PHY_CMN_CLK_CFG0 register is updated by the PHY driver and by two
divider clocks from Common Clock Framework:
devm_clk_hw_register_divider_parent_hw(). Concurrent access by the
clocks side is protected with spinlock, however driver's side in
restoring state is not. Restoring state is called from
msm_dsi_phy_enable(), so there could be a path leading to concurrent and
conflicting updates with clock framework.
Add missing lock usage on the PHY driver side, encapsulated in its own
function so the code will be still readable.
While shuffling the code, define and use PHY_CMN_CLK_CFG0 bitfields to
make the code more readable and obvious.
Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/637376/
Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-1-0943b850722c@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Drop extra return at the end of dpu_crtc_reassign_planes()
Fixes: 774bcfb73176 ("drm/msm/dpu: add support for virtual planes")
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/631565/
Link: https://lore.kernel.org/r/20250108-virtual-planes-fixes-v1-2-420cb36df94a@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
What used to be the input_10_bits boolean - feeding into the lowest
bit of DSC_ENC - on MSM downstream turned into an accidental OR with
the full bits_per_component number when it was ported to the upstream
kernel.
On typical bpc=8 setups we don't notice this because line_buf_depth is
always an odd value (it contains bpc+1) and will also set the 4th bit
after left-shifting by 3 (hence this |= bits_per_component is a no-op).
Now that guards are being removed to allow more bits_per_component
values besides 8 (possible since commit 49fd30a7153b ("drm/msm/dsi: use
DRM DSC helpers for DSC setup")), a bpc of 10 will instead clash with
the 5th bit which is convert_rgb. This is "fortunately" also always set
to true by MSM's dsi_populate_dsc_params() already, but once a bpc of 12
starts being used it'll write into simple_422 which is normally false.
To solve all these overlaps, simply replicate downstream code and only
set this lowest bit if bits_per_component is equal to 10. It is unclear
why DSC requires this only for bpc=10 but not bpc=12, and also notice
that this lowest bit wasn't set previously despite having a panel and
patch on the list using it without any mentioned issues.
Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/636311/
Link: https://lore.kernel.org/r/20250211-dsc-10-bit-v1-1-1c85a9430d9a@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Disable pingpong dither in dpu_encoder_helper_phys_cleanup().
This avoids the issue where an encoder unknowingly uses dither after
reserving a pingpong block that was previously bound to an encoder that
had enabled dither.
Cc: stable@vger.kernel.org
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Closes: https://lore.kernel.org/all/jr7zbj5w7iq4apg3gofuvcwf4r2swzqjk7sshwcdjll4mn6ctt@l2n3qfpujg3q/
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Fixes: 3c128638a07d ("drm/msm/dpu: add support for dither block in display")
Patchwork: https://patchwork.freedesktop.org/patch/636517/
Link: https://lore.kernel.org/r/20250211-dither-disable-v1-1-ac2cb455f6b9@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
There is a possibility for an uninitialized *ret* variable to be
returned in some code paths.
Fix this by initializing *ret* to 0.
Addresses-Coverity-ID: 1642546 ("Uninitialized scalar variable")
Fixes: 774bcfb73176 ("drm/msm/dpu: add support for virtual planes")
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/636201/
Link: https://lore.kernel.org/r/20250209-dpu-v2-1-114dfd4ebefd@ethancedwards.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Widebus allows the DP controller to operate in 2 pixel per clock mode.
The mode validation logic validates the mode->clock against the max
DP pixel clock. However the max DP pixel clock limit assumes widebus
is already enabled. Adjust the mode validation logic to only compare
the adjusted pixel clock which accounts for widebus against the max DP
pixel clock. Also fix the mode validation logic for YUV420 modes as in
that case as well, only half the pixel clock is needed.
Cc: stable@vger.kernel.org
Fixes: 757a2f36ab09 ("drm/msm/dp: enable widebus feature for display port")
Fixes: 6db6e5606576 ("drm/msm/dp: change clock related programming for YUV420 over DP")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dale Whinham <daleyo@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/635789/
Link: https://lore.kernel.org/r/20250206-dp-widebus-fix-v2-1-cb89a0313286@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
The SM6150 platform doesn't have 3DMux (MERGE_3D) block, so it can not
split the screen between two LMs. Drop lm_pair fields as they don't make
sense for this platform.
Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Fixes: cb2f9144693b ("drm/msm/dpu: Add SM6150 support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629377/
Link: https://lore.kernel.org/r/20241217-dpu-fix-sm6150-v2-1-9acc8f5addf3@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Several DPU 5.x platforms are supposed to be using DPU_WB_INPUT_CTRL,
to bind WB and PINGPONG blocks, but they do not. Change those platforms
to use WB_SM8250_MASK, which includes that bit.
Fixes: 1f5bcc4316b3 ("drm/msm/dpu: enable writeback on SC8108X")
Fixes: ab2b03d73a66 ("drm/msm/dpu: enable writeback on SM6125")
Fixes: 47cebb740a83 ("drm/msm/dpu: enable writeback on SM8150")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/628876/
Link: https://lore.kernel.org/r/20241214-dpu-drop-features-v1-2-988f0662cb7e@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
The SM8450 and later chips have DPU_MDP_PERIPH_0_REMOVED feature bit
set, which means that those platforms have dropped some of the
registers, including the WD TIMER-related ones. Stop providing the
callback to program WD timer on those platforms.
Fixes: 100d7ef6995d ("drm/msm/dpu: add support for SM8450")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/628874/
Link: https://lore.kernel.org/r/20241214-dpu-drop-features-v1-1-988f0662cb7e@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
If userspace is trying to achieve a timeout of zero, let 'em have it.
Only round up if the timeout is greater than zero.
Fixes: 4969bccd5f4e ("drm/msm: Avoid rounding down to zero jiffies")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/632264/
|
|
We only fetch it once from userland, so let's also only notify the
user once and not on every runtime resume.
As you can notice by the tags chain, more than one user found this
annoying.
Reported-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Suggested-by: Abel Vesa <abel.vesa@linaro.org>
Suggested-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/637062/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Currently, DRM atomic uAPI allows only primary planes to be flipped
asynchronously. However, each driver might be able to perform async
flips in other different plane types. To enable drivers to set their own
restrictions on which type of plane they can or cannot flip, use the
existing atomic_async_check() from struct drm_plane_helper_funcs to
enhance this flexibility, thus allowing different plane types to be able
to do async flips as well.
Create a new parameter for the atomic_async_check(), `bool flip`. This
parameter is used to distinguish when this function is being called from
a plane update from a full page flip.
In order to prevent regressions and such, we keep the current policy: we
skip the driver check for the primary plane, because it is always
allowed to do async flips on it.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Christopher Snowhill <chris@kode54.net>
Tested-by: Christopher Snowhill <chris@kode54.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20250127-tonyk-async_flip-v12-1-0f7f8a8610d3@igalia.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
drm_sched_init() has a great many parameters and upcoming new
functionality for the scheduler might add even more. Generally, the
great number of parameters reduces readability and has already caused
one missnaming, addressed in:
commit 6f1cacf4eba7 ("drm/nouveau: Improve variable name in
nouveau_sched_init()").
Introduce a new struct for the scheduler init parameters and port all
users.
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Matthew Brost <matthew.brost@intel.com> # for Xe
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> # for Panfrost and Panthor
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com> # for Etnaviv
Reviewed-by: Frank Binns <frank.binns@imgtec.com> # for Imagination
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> # for Sched
Reviewed-by: Maíra Canal <mcanal@igalia.com> # for v3d
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> # for amdxdna
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211111422.21235-2-phasta@kernel.org
|
|
Bring rc1 to start the new release dev.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"Kthreads affinity follow either of 4 existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never
execute relevant code on any other CPU. This is currently handled
by smpboot code which takes care of CPU-hotplug operations.
Affinity here is a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and
can't run anywhere else. The affinity is set through
kthread_bind_mask() and the subsystem takes care by itself to
handle CPU-hotplug operations. Affinity here is assumed to be a
correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node.
This is not a correctness constraint but merely a preference in
terms of memory locality. kswapd and kcompactd both fall into this
category. The affinity is set manually like for any other task and
CPU-hotplug is supposed to be handled by the relevant subsystem so
that the task is properly reaffined whenever a given CPU from the
node comes up. Also care should be taken so that the node affinity
doesn't cross isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its
own ad-hoc way.
This is an infrastructure proposal to handle this with the following
API changes:
- kthread_create_on_node() automatically affines the created kthread
to its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called
right after kthread_create_on_node() to specify a preferred
affinity different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine to
the housekeeping CPUs (which means to all online CPUs most of the time
or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
- Consolidate a bunch of ad-hoc implementations of
kthread_run_on_cpu()
- Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
- Add some correctness check to ensure kthread_bind() is always
called before the first kthread wake up.
- Default affine kthread to its preferred node.
- Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
- Implement kthreads preferred affinity
- Unify kthread worker and kthread API's style
- Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation"
* tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: modify kernel-doc function name to match code
rcu: Use kthread preferred affinity for RCU exp kworkers
treewide: Introduce kthread_run_worker[_on_cpu]()
kthread: Unify kthread_create_on_cpu() and kthread_create_worker_on_cpu() automatic format
rcu: Use kthread preferred affinity for RCU boost
kthread: Implement preferred affinity
mm: Create/affine kswapd to its preferred node
mm: Create/affine kcompactd to its preferred node
kthread: Default affine kthread to its preferred NUMA node
kthread: Make sure kthread hasn't started while binding it
sched,arm64: Handle CPU isolation on last resort fallback rq selection
arm64: Exclude nohz_full CPUs from 32bits el0 support
lib: test_objpool: Use kthread_run_on_cpu()
kallsyms: Use kthread_run_on_cpu()
soc/qman: test: Use kthread_run_on_cpu()
arm/bL_switcher: Use kthread_run_on_cpu()
|
|
drm-next
Updates for v6.14
MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
MDP4:
- several small fixes
DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane)
- fixed modes filtering for platforms w/o 3DMux
- fixed DSPP DSPP_2 / _3 links on several platforms
- corrected DSPP definitions on SDM670
- added CWB hardware blocks support
- added VBIF to DPU snapshots
- dropped struct dpu_rm_requirements
DP:
- reworked DP audio support
DSI:
- added SM6150 (aka QCS615) support
GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsutUu4ff6OpXNXxqf1xaV0rV6oV23VXNRiF0_OEfe72Q@mail.gmail.com
|
|
kthread_create() creates a kthread without running it yet. kthread_run()
creates a kthread and runs it.
On the other hand, kthread_create_worker() creates a kthread worker and
runs it.
This difference in behaviours is confusing. Also there is no way to
create a kthread worker and affine it using kthread_bind_mask() or
kthread_affine_preferred() before starting it.
Consolidate the behaviours and introduce kthread_run_worker[_on_cpu]()
that behaves just like kthread_run(). kthread_create_worker[_on_cpu]()
will now only create a kthread worker without starting it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
|
|
The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge
take a const struct drm_display_mode argument. Change the mode_valid
callback of drm_connector to also take a const argument.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-5-4f9498a4c822@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104190636.274926-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Debugging incorrect UAPI usage tends to be a bit painful, so add a
helper macro to make it easier to add debug logging which can be enabled
at runtime via drm.debug.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/630578/
|
|
The call chain on a5xx_gpu_init is such that pdev is not going to be
null, so the null check on pdev can be removed. This also cleans up
a static analysis warning where pdev is dereferenced before the null
check which cannot actually occur.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/624180/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The "submit->cmd[i].size" and "submit->cmd[i].offset" variables are u32
values that come from the user via the submit_lookup_cmds() function.
This addition could lead to an integer wrapping bug so use size_add()
to prevent that.
Fixes: 198725337ef1 ("drm/msm: fix cmdstream size check")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/624696/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
This adds MSM_PARAM_UCHE_TRAP_BASE that will be used by Mesa
implementation for VK_KHR_shader_clock and GL_ARB_shader_clock.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Patchwork: https://patchwork.freedesktop.org/patch/627036/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Now all the DDR bandwidth voting via the GPU Management Unit (GMU)
is in place, declare the Bus Control Modules (BCMs) and the
corresponding parameters in the GPU info struct.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629401/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The Adreno GPU Management Unit (GMU) can also scale the DDR Bandwidth
along the Frequency and Power Domain level, until now we left the OPP
core scale the OPP bandwidth via the interconnect path.
In order to enable bandwidth voting via the GPU Management
Unit (GMU), when an opp is set by devfreq we also look for
the corresponding bandwidth index in the previously generated
bw_table and pass this value along the frequency index to the GMU.
The GMU also takes another vote called AB which is a 16bit quantized
value of the floor bandwidth against the maximum supported bandwidth.
The AB is calculated with a default 25% of the bandwidth like the
downstream implementation too inform the GMU firmware the minimal
quantity of bandwidth we require for this OPP. Only pass the AB
vote starting from A750 GPUs.
Since we now vote for all resources via the GMU, setting the OPP
is no more needed, so we can completely skip calling
dev_pm_opp_set_opp() in this situation.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/629397/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The Adreno GPU Management Unit (GMU) can also scale the ddr
bandwidth along the frequency and power domain level, but for
now we statically fill the bw_table with values from the
downstream driver.
Only the first entry is used, which is a disable vote, so we
currently rely on scaling via the linux interconnect paths.
Let's dynamically generate the bw_table with the vote values
previously calculated from the OPPs.
Those entries will then be used by the GMU when passing the
appropriate bandwidth level while voting for a gpu frequency.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/629396/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The Adreno GPU Management Unit (GMU) can also scale DDR Bandwidth along
the Frequency and Power Domain level, but by default we leave the
OPP core scale the interconnect ddr path.
While scaling via the interconnect path was sufficient, newer GPUs
like the A750 requires specific vote paremeters and bandwidth to
achieve full functionality.
In order to calculate vote values used by the GPU Management
Unit (GMU), we need to parse all the possible OPP Bandwidths and
create a vote value to be sent to the appropriate Bus Control
Modules (BCMs) declared in the GPU info struct.
This vote value is called IB, while on the other side the GMU also
takes another vote called AB which is a 16bit quantized value
of the floor bandwidth against the maximum supported bandwidth.
The AB vote will be calculated later when setting the frequency.
The vote array will then be used to dynamically generate the GMU
bw_table sent during the GMU power-up.
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/629395/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
