summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel
AgeCommit message (Collapse)Author
2023-11-28drm/panel-edp: Add auo_b116xa3_modeHsin-Yi Wang
Add auo_b116xa3_mode to override the original modes parsed from edid of the panels 0x405c B116XAK01.0 and 0x615c B116XAN06.1 which result in glitches on panel. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231117215056.1883314-3-hsinyi@chromium.org
2023-11-28drm/panel-edp: Add override_edid_mode quirk for generic edpHsin-Yi Wang
Generic edp gets mode from edid. However, some panels report incorrect mode in this way, resulting in glitches on panel. Introduce a new quirk additional_mode to the generic edid to pick a correct hardcoded mode. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231117215056.1883314-2-hsinyi@chromium.org
2023-11-28Merge v6.7-rc3 into drm-nextDaniel Vetter
Thomas Zimermann needs 8d6ef26501 ("drm/ast: Disconnect BMC if physical connector is connected") for further ast work in -next. Minor conflicts in ivpu between 3de6d9597892 ("accel/ivpu: Pass D0i3 residency time to the VPU firmware") and 3f7c0634926d ("accel/ivpu/37xx: Fix hangs related to MMIO reset") changing adjacent lines. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2023-11-21drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBPCong Yang
The refresh reported by modetest is 60.46Hz, and the actual measurement is 60.01Hz, which is outside the expected tolerance. Adjust hporch and pixel clock to fix it. After repair, modetest and actual measurement were all 60.01Hz. Modetest refresh = Pixel CLK/ htotal* vtotal, but measurement frame rate is HS->LP cycle time(Vblanking). Measured frame rate is not only affecte by Htotal/Vtotal/pixel clock, also affected by Lane-num/PixelBit/LineTime /DSI CLK. Assume that the DSI controller could not make the mode that we requested(presumably it's PLL couldn't generate the exact pixel clock?). If you use a different DSI controller, you may need to readjust these parameters. Now this panel looks like it's only used by me on the MTK platform, so let's change this set of parameters. Fixes: 1bc2ef065f13 ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel") Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231120020109.3216343-1-yangcong5@huaqin.corp-partner.google.com
2023-11-20drm/panel-elida-kd35t133: Drop prepare/unprepare logicChris Morgan
Drop the prepare/unprepare logic, as this is now tracked elsewhere since this commit [1]. [1] commit d2aacaf07395 ("drm/panel: Check for already prepared/enabled in drm_panel") Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231117194405.1386265-6-macroalpha82@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231117194405.1386265-6-macroalpha82@gmail.com
2023-11-20drm/panel-elida-kd35t133: Drop shutdown logicChris Morgan
The driver shutdown is duplicate as it calls drm_unprepare and drm_disable which are called anyway when associated drivers are shutdown/removed. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231117194405.1386265-5-macroalpha82@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231117194405.1386265-5-macroalpha82@gmail.com
2023-11-20drm/panel-elida-kd35t133: drop drm_connector_set_orientation_from_panelChris Morgan
Stop calling drm_connector_set_orientation_from_panel() as its now called by the panel bridge directly when it is initialized. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20231117194405.1386265-4-macroalpha82@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231117194405.1386265-4-macroalpha82@gmail.com
2023-11-20drm/panel-elida-kd35t133: hold panel in reset for unprepareChris Morgan
For devices like the Anbernic RG351M and RG351P the panel is wired to an always on regulator. When the device suspends and wakes up, there are some slight artifacts on the screen that go away over time. If instead we hold the panel in reset status after it is unprepared, this does not happen. Fixes: 5b6603360c12 ("drm/panel: add panel driver for Elida KD35T133 panels") Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20231117194405.1386265-3-macroalpha82@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231117194405.1386265-3-macroalpha82@gmail.com
2023-11-20drm/panel-elida-kd35t133: trival: update panel size from 5.5 to 3.5Chris Morgan
The comments at the top of the driver state the panel size incorrectly as 5.5" instead of 3.5". Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20231117194405.1386265-2-macroalpha82@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231117194405.1386265-2-macroalpha82@gmail.com
2023-11-20drm/panel: nv3051d: Add Powkiddy RK2023 Panel SupportChris Morgan
Refactor the driver to add support for the powkiddy,rk2023-panel panel. This panel is extremely similar to the rg353p-panel but requires a smaller vertical back porch and isn't as tolerant of higher speeds. Note that while all of these panels are identical in size (70x57) it is possible future panels may not be. Tested on my RG351V, RG353P, RG353V, and RK2023. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20231117202536.1387815-4-macroalpha82@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231117202536.1387815-4-macroalpha82@gmail.com
2023-11-20drm/panel: nv3051d: Hold panel in reset for unprepareChris Morgan
Improve the panel's ability to restore from suspend by holding the panel in suspend after unprepare. Fixes: b1d39f0f4264 ("drm/panel: Add NewVision NV3051D MIPI-DSI LCD panel") Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20231117202536.1387815-3-macroalpha82@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231117202536.1387815-3-macroalpha82@gmail.com
2023-11-19drm/panel: simple: Fix Innolux G101ICE-L01 timingsMarek Vasut
The Innolux G101ICE-L01 datasheet [1] page 17 table 6.1 INPUT SIGNAL TIMING SPECIFICATIONS indicates that maximum vertical blanking time is 40 lines. Currently the driver uses 29 lines. Fix it, and since this panel is a DE panel, adjust the timings to make them less hostile to controllers which cannot do 1 px HSA/VSA, distribute the delays evenly between all three parts. [1] https://www.data-modul.com/sites/default/files/products/G101ICE-L01-C2-specification-12042389.pdf Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231008223256.279196-1-marex@denx.de
2023-11-19drm/panel: simple: Fix Innolux G101ICE-L01 bus flagsMarek Vasut
Add missing .bus_flags = DRM_BUS_FLAG_DE_HIGH to this panel description, ones which match both the datasheet and the panel display_timing flags . Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231008223315.279215-1-marex@denx.de
2023-11-17drm/panel: auo,b101uan08.3: Fine tune the panel power sequenceXuxin Xiong
For "auo,b101uan08.3" this panel, it is stipulated in the panel spec that MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high. Fixes: 56ad624b4cb5 ("drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel") Signed-off-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231114044205.613421-1-xuxinxiong@huaqin.corp-partner.google.com
2023-11-15Merge drm/drm-next into drm-misc-nextMaxime Ripard
Let's kickstart the v6.8 release cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-09drm/panel-edp: drm/panel-edp: Add several generic edp panelsHsin-Yi Wang
Add a few generic edp panels used by mt8186 chromebooks. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231107204611.3082200-4-hsinyi@chromium.org
2023-11-09drm/panel-edp: drm/panel-edp: Fix AUO B116XTN02 nameHsin-Yi Wang
Rename AUO 0x235c B116XTN02 to B116XTN02.3 according to decoding edid. Fixes: 3db2420422a5 ("drm/panel-edp: Add AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49 V8.0") Cc: stable@vger.kernel.org Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231107204611.3082200-3-hsinyi@chromium.org
2023-11-09drm/panel-edp: drm/panel-edp: Fix AUO B116XAK01 name and timingHsin-Yi Wang
Rename AUO 0x405c B116XAK01 to B116XAK01.0 and adjust the timing of auo_b116xak01: T3=200, T12=500, T7_max = 50 according to decoding edid and datasheet. Fixes: da458286a5e2 ("drm/panel: Add support for AUO B116XAK01 panel") Cc: stable@vger.kernel.org Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231107204611.3082200-2-hsinyi@chromium.org
2023-11-06drm/panel: nt35510: fix typoDario Binacchi
Replace 'HFP' with 'HBP'. Fixes: 899f24ed8d3a ("drm/panel: Add driver for Novatek NT35510-based panels") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231023090613.1694133-1-dario.binacchi@amarulasolutions.com
2023-10-31Merge tag 'drm-misc-next-2023-10-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.7-rc1: drm-misc-next-2023-10-19 + following: UAPI Changes: Cross-subsystem Changes: - Convert fbdev drivers to use fbdev i/o mem helpers. Core Changes: - Use cross-references for macros in docs. - Make drm_client_buffer_addb use addfb2. - Add NV20 and NV30 YUV formats. - Documentation updates for create_dumb ioctl. - CI fixes. - Allow variable number of run-queues in scheduler. Driver Changes: - Rename drm/ast constants. - Make ili9882t its own driver. - Assorted fixes in ivpu, vc4, bridge/synopsis, amdgpu. - Add planar formats to rockchip. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3d92fae8-9b1b-4165-9ca8-5fda11ee146b@linux.intel.com
2023-10-27drm/panel-edp: Add AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49 V8.0Sheng-Liang Pan
Add panel identification entry for - AUO B116XTN02 family (product ID:0x235c) - BOE NT116WHM-N21,836X2 (product ID:0x09c3) - BOE NV116WHM-N49 V8.0 (product ID:0x0979) Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231027110435.1.Ia01fe9ec1c0953e0050a232eaa782fef2c037516@changeid
2023-10-23BackMerge tag 'v6.6-rc7' into drm-nextDave Airlie
This is needed to add the msm pr which is based on a higher base. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-10-19drm/panel: ili9882t: Avoid blurred screen from fast sleepCong Yang
At present, we have found that there may be a problem of blurred screen during fast sleep/resume. The direct cause of the blurred screen is that the IC does not receive 0x28/0x10. Because of the particularity of the IC, before the panel enters sleep hid must stop scanning, as i2c_hid_core_suspend before ili9882t_disable. If move the ili9882t_enter_sleep_mode function to ili9882t_unprepare, touch reset will pull low before panel entersleep, which does not meet the timing requirements.. So in order to solve this problem, the IC can handle it through the exception mechanism when it cannot receive 0x28/0x10 command. Handling exceptions requires a reset 50ms delay. Refer to vendor detailed analysis [1]. Ilitek vendor also suggested switching the page before entering sleep to avoid panel IC not receiving 0x28/0x10 command. Note: 0x28 is display off, 0x10 is sleep in. [1]: https://github.com/ILITEK-LoganLin/Document/tree/main/ILITEK_Power_Sequence Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231013091844.804310-3-yangcong5@huaqin.corp-partner.google.com
2023-10-19drm/panel: ili9882t: Break out as separate driverCong Yang
The Starry ILI9882t-based panel should never have been part of the boe tv101wum driver, it is clearly based on the Ilitek ILI9882t display controller and if you look at the custom command sequences for the panel these clearly contain the signature Ilitek page switch (0xff) commands. The hardware has nothing in common with the other panels supported by this driver. Break this out into a separate driver and config symbol instead. If the placement here is out of convenience for using similar code, we should consider creating a helper library instead. Co-developed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231013091844.804310-2-yangcong5@huaqin.corp-partner.google.com
2023-10-16drm/panel: st7703: Add Powkiddy RGB30 Panel SupportChris Morgan
The Powkiddy RGB30 4 inch panel is a 4 inch 720x720 DSI panel used in the Powkiddy RGB30 handheld gaming device. Add support for it. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231013183918.225666-4-macroalpha82@gmail.com
2023-10-15drm/panel: st7703: Fix timings when entering/exiting sleepFrank Oltmanns
Fix flickering of the pinephone's XDB599 panel that happens after resume. Extend the delay after issuing the command to exit sleep mode from 60 to 120 msec as per the controller's specification. Introduce a 120 msec delay after issuing the command to enter sleep mode. This is needed in order for the controller to reliably finalize the sleep in sequence before switching of power supply. In contrast to the JH057N panel, the XBD599 panel does not require a 20 msec delay after initialization and exiting sleep mode. Therefore, move the delay into the already existing device specific initialization function. The XDB599 does not require a 20 msec delay between the SETBGP and SETVCOM commands. Therefore, remove the delay from the device specific initialization function. Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Cc: Ondrej Jirman <megi@xff.cz> Reported-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Tested-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Guido Günther <agx@sigxcpu.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230213123238.76889-2-frank@oltmanns.dev
2023-10-15drm/panel: st7703: Pick different reset sequenceOndrej Jirman
Switching to a different reset sequence, enabling IOVCC before enabling VCC. There also needs to be a delay after enabling the supplies and before deasserting the reset. The datasheet specifies 1ms after the supplies reach the required voltage. Use 10-20ms to also give the power supplies some time to reach the required voltage, too. This fixes intermittent panel initialization failures and screen corruption during resume from sleep on panel xingbangda,xbd599 (e.g. used in PinePhone). Signed-off-by: Ondrej Jirman <megi@xff.cz> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Reported-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Tested-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Guido Günther <agx@sigxcpu.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230211171748.36692-2-frank@oltmanns.dev
2023-10-12drm/panel: Move AUX B116XW03 out of panel-edp back to panel-simpleDouglas Anderson
In commit 5f04e7ce392d ("drm/panel-edp: Split eDP panels out of panel-simple") I moved a pile of panels out of panel-simple driver into the newly created panel-edp driver. One of those panels, however, shouldn't have been moved. As is clear from commit e35e305eff0f ("drm/panel: simple: Add AUO B116XW03 panel support"), AUX B116XW03 is an LVDS panel. It's used in exynos5250-snow and exynos5420-peach-pit where it's clear that the panel is hooked up with LVDS. Furthermore, searching for datasheets I found one that makes it clear that this panel is LVDS. As far as I can tell, I got confused because in commit 88d3457ceb82 ("drm/panel: auo,b116xw03: fix flash backlight when power on") Jitao Shi added "DRM_MODE_CONNECTOR_eDP". That seems wrong. Looking at the downstream ChromeOS trees, it seems like some Mediatek boards are using a panel that they call "auo,b116xw03" that's an eDP panel. The best I can guess is that they actually have a different panel that has similar timing. If so then the proper panel should be used or they should switch to the generic "edp-panel" compatible. When moving this back to panel-edp, I wasn't sure what to use for .bus_flags and .bus_format and whether to add the extra "enable" delay from commit 88d3457ceb82 ("drm/panel: auo,b116xw03: fix flash backlight when power on"). I've added formats/flags/delays based on my (inexpert) analysis of the datasheet. These are untested. NOTE: if/when this is backported to stable, we might run into some trouble. Specifically, before 474c162878ba ("arm64: dts: mt8183: jacuzzi: Move panel under aux-bus") this panel was used by "mt8183-kukui-jacuzzi", which assumed it was an eDP panel. I don't know what to suggest for that other than someone making up a bogus panel for jacuzzi that's just for the stable channel. Fixes: 88d3457ceb82 ("drm/panel: auo,b116xw03: fix flash backlight when power on") Fixes: 5f04e7ce392d ("drm/panel-edp: Split eDP panels out of panel-simple") Tested-by: Anton Bambura <jenneron@postmarketos.org> Acked-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230925150010.1.Iff672233861bcc4cf25a7ad0a81308adc3bda8a4@changeid
2023-10-11Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Updating drm-misc-next to the state of Linux v6.6-rc2. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2023-10-10drm/panel: ltk050h3146w: add support for Leadtek LTK050H3148W-CTA6 variantKlaus Goger
The LTK050H3148W-CTA6 is a 5.0" 720x1280 DSI display, whose driving controller is a Himax HX8394-F, slightly different from LTK050H3146W by its init sequence, mode details and mode flags. Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220131164723.714836-2-quentin.schulz@theobroma-systems.com
2023-10-10drm/panel: ltk050h3146w: add mipi_dsi_device.mode_flags to of_match_dataQuentin Schulz
To prepare for a new display to be supported by this driver which has a slightly different set of DSI mode related flags, let's move the currently hardcoded mode flags to the .data field of of_device_id structure. Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220131164723.714836-1-quentin.schulz@theobroma-systems.com
2023-10-10drm/panel: boe-tv101wum-nl6: Completely pull GPW to VGL before TP termRuihai Zhou
The sta_himax83102 panel sometimes shows abnormally flickering horizontal lines. The front gate output will precharge the X point of the next pole circuit before TP(TouchPanel Enable) term starts, and wait until the end of the TP term to resume the CLK. For this reason, the X point must be maintained during the TP term. In abnormal case, we measured a slight leakage at point X. This because during the TP term, the GPW does not fully pull the VGL low, causing the TFT to not be closed tightly. To fix this, we completely pull GPW to VGL before entering the TP term. This will ensure that the TFT is closed tightly and prevent the abnormal display. Fixes: 1bc2ef065f13 ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel") Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231007064949.22668-1-zhouruihai@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231007064949.22668-1-zhouruihai@huaqin.corp-partner.google.com
2023-10-10drm/panel/panel-tpo-tpg110: fix a possible null pointer dereferenceMa Ke
In tpg110_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. Signed-off-by: Ma Ke <make_ruc2021@163.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231009090446.4043798-1-make_ruc2021@163.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231009090446.4043798-1-make_ruc2021@163.com
2023-10-10drm/panel: fix a possible null pointer dereferenceMa Ke
In versatile_panel_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. Signed-off-by: Ma Ke <make_ruc2021@163.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231007033105.3997998-1-make_ruc2021@163.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231007033105.3997998-1-make_ruc2021@163.com
2023-10-09drm/panel-simple: allow LVDS format overrideJohannes Zink
Some panels support multiple LVDS data mapping formats, which can be used e.g. run displays on jeida-18 format when only 3 LVDS lanes are available. Add parsing of an optional data-mapping devicetree property, which also touches up the bits per color to match the bus format. Signed-off-by: Johannes Zink <j.zink@pengutronix.de> Link: https://lore.kernel.org/r/20230523-simplepanel_support_nondefault_datamapping-v5-3-0d7928edafab@pengutronix.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230523-simplepanel_support_nondefault_datamapping-v5-3-0d7928edafab@pengutronix.de
2023-10-05drm/panel: nv3051d: Add Support for Anbernic 351VChris Morgan
Add support for the Anbernic 351V. Just like the 353 series the underlying vendor is unknown/unmarked (at least not visible in a non-destructive manner). The panel had slightly different init sequences and timings in the BSP kernel, but works fine with the same ones used in the existing driver. The panel will not work without the inclusion of the MIPI_DSI_CLOCK_NON_CONTINUOUS flag, and this flag prevents the 353 series from working correctly, so a new compatible string is added. Tested colors and timings using modetest and all seem to work identical to the 353 otherwise. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20231003163355.143704-3-macroalpha82@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231003163355.143704-3-macroalpha82@gmail.com
2023-10-02drm/panel: Add driver for BOE RM692E5 AMOLED panelKonrad Dybcio
Add support for the 2700x1224 AMOLED BOE panel bundled with a RM692E5 driver IC, as found on the Fairphone 5 smartphone. Co-developed-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230927-topic-fp5_disp-v2-2-7b5e1d1662a6@linaro.org
2023-10-02drm/panel: ili9322: Convert to use maple tree register cacheMark Brown
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231001-drm-sn65dsi83-maple-v1-2-5519799a55e5@kernel.org
2023-10-02drm/panel: ili9322: Remove redundant volatle_reg() operationMark Brown
The ili9322 driver has a volatile_reg() operation in it's regmap which always returns false. This is redundant since it is the default in the regmap core, remove the operation for a trivial code size and performance improvement. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231001-drm-sn65dsi83-maple-v1-1-5519799a55e5@kernel.org
2023-09-29Merge tag 'drm-misc-next-2023-09-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.7-rc1: UAPI Changes: - drm_file owner is now updated during use, in the case of a drm fd opened by the display server for a client, the correct owner is displayed. - Qaic gains support for the QAIC_DETACH_SLICE_BO ioctl to allow bo recycling. Cross-subsystem Changes: - Disable boot logo for au1200fb, mmpfb and unexport logo helpers. Only fbcon should manage display of logo. - Update freescale in MAINTAINERS. - Add some bridge files to bridge in MAINTAINERS. - Update gma500 driver repo in MAINTAINERS to point to drm-misc. Core Changes: - Move size computations to drm buddy allocator. - Make drm_atomic_helper_shutdown(NULL) a nop. - Assorted small fixes in drm_debugfs, DP-MST payload addition error handling. - Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR handling. - Handle bad (h/v)sync_end in EDID by clipping to htotal. - Build GPUVM as a module. Driver Changes: - Simple drivers don't need to cache prepared result. - Call drm_atomic_helper_shutdown() in shutdown/unbind for a whole lot more drm drivers. - Assorted small fixes in amdgpu, ssd130x, bridge/it6621, accel/qaic, nouveau, tc358768. - Add NV12 for komeda writeback. - Add arbitration lost event to synopsis/dw-hdmi-cec. - Speed up s/r in nouveau by not restoring some big bo's. - Assorted nouveau display rework in preparation for GSP-RM, especially related to how the modeset sequence works and the DP sequence in relation to link training. - Update anx7816 panel. - Support NVSYNC and NHSYNC in tegra. - Allow multiple power domains in simple driver. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f1fae5eb-25b8-192a-9a53-215e1184ce81@linux.intel.com
2023-09-22Merge tag 'drm-misc-next-2023-09-11-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.7-rc1: UAPI Changes: - Nouveau changed to not set NO_PREFETCH flag explicitly. Cross-subsystem Changes: - Update documentation of dma-buf intro and uapi. - fbdev/sbus fixes. - Use initializer macros in a lot of fbdev drivers. - Add Boris Brezillon as Panfrost driver maintainer. - Add Jessica Zhang as drm/panel reviewer. - Make more fbdev drivers use fb_ops helpers for deferred io. - Small hid trailing whitespace fix. - Use fb_ops in hid/picolcd Core Changes: - Assorted small fixes to ttm tests, drm/mst. - Documentation updates to bridge. - Add kunit tests for some drm_fb functions. - Rework drm_debugfs implementation. - Update xe documentation to mark todos as completed. Driver Changes: - Add support to rockchip for rv1126 mipi-dsi and vop. - Assorted small fixes to nouveau, bridge/samsung-dsim, bridge/lvds-codec, loongson, rockchip, panfrost, gma500, repaper, komeda, virtio, ssd130x. - Add support for simple panels Mitsubishi AA084XE01, JDI LPM102A188A, - Documentation updates to accel/ivpu. - Some nouveau scheduling/fence fixes. - Power management related fixes and other fixes to ivpu. - Assorted bridge/it66121 fixes. - Make platform drivers return void in remove() callback. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3da6554b-3b47-fe7d-c4ea-21f4f819dbb6@linux.intel.com
2023-09-13drm/panel: otm8009a: Don't double check prepared/enabledDouglas Anderson
As talked about in commit d2aacaf07395 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. For the "otm8009a" driver we fully remove the storing of the "enabled" state and we remove the double-checking, but we still keep the storing of the "prepared" state since the backlight code in the driver checks it. This backlight code may not be perfectly safe since there doesn't appear to be sufficient synchronization between the backlight driver (which userspace can call into directly) and the code that's unpreparing the panel. However, this lack of safety is not new and can be addressed in a future patch. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230804140605.RFC.3.I6a4a3c81c78acf5acdc2e5b5d936e19bf57ec07a@changeid
2023-09-13drm/panel: s6e63m0: Don't store+check prepared/enabledDouglas Anderson
As talked about in commit d2aacaf07395 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. For the s6e63m0 panel driver, this actually fixes a subtle/minor error handling bug in s6e63m0_prepare(). In one error case s6e63m0_prepare() called s6e63m0_unprepare() directly if there was an error. This call to s6e63m0_unprepare() would have been a no-op since ctx->prepared wasn't set yet. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230804140605.RFC.2.Iabafd062e70f6b6b554cf23eeb75f57a80f7e985@changeid
2023-09-13drm/panel: Don't store+check prepared/enabled for simple casesDouglas Anderson
As talked about in commit d2aacaf07395 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. This pile of panel drivers appears to be simple to handle. Based on code inspection they seemed to be using the prepared/enabled state simply for double-checking that nothing else in the kernel called them inconsistently. Now that the core drm_panel is doing the double checking (and warning) it should be very clear that these devices don't need their own double-check. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230804140605.RFC.1.Ia54954fd2f7645c1b86597494902973f57feeb71@changeid
2023-08-24BackMerge tag 'v6.5-rc7' into drm-nextDave Airlie
Linux 6.5-rc7 This is needed for the CI stuff and the msm pull has fixes in it. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-08-16drm/panel: Add driver for JDI LPM102A188ADiogo Ivo
The JDI LPM102A188A is a 2560x1800 IPS panel found in the Google Pixel C. This driver is based on the downstream GPLv2 driver released by Google written by Sean Paul [1], which was then adapted to the newer kernel APIs. [1]: https://android.googlesource.com/kernel/tegra/+/refs/heads/android-tegra-dragon-3.18-oreo/drivers/gpu/drm/panel/panel-jdi-lpm102a188a.c Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230807133307.27456-3-diogo.ivo@tecnico.ulisboa.pt
2023-08-16drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clockLuca Ceresoli
This panel has been implemented in commit eae7488814b5 ("drm/panel-simple: Add Innolux G156HCE-L01 panel entry") with a higher clock than the typical one mentioned on the documentation to avoid flickering on the unit tested. Testing on a different unit shows that the panel actually works with the intended 70.93 MHz clock and even lower frequencies so the flickering is likely caused either by a defective unit or by other different components such as the bridge. Fixes: eae7488814b5 ("drm/panel-simple: Add Innolux G156HCE-L01 panel entry") Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Tested-by: Marek Vasut <marex@denx.de> # MX8MM with LT9211 Reviewed-by: Marek Vasut <marex@denx.de> [narmstrong: fixed commit id in commit msg] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230814134024.397739-1-luca.ceresoli@bootlin.com
2023-08-14drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docsLuca Ceresoli
Commit 03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4 panel") added support for this panel model, but the timings it implements are very different from what the datasheet describes. I checked both the G121EAN01.0 datasheet from [0] and the G121EAN01.4 one from [1] and they all have the same timings: for example the LVDS clock typical value is 74.4 MHz, not 66.7 MHz as implemented. Replace the timings with the ones from the documentation. These timings have been tested and the clock frequencies verified with an oscilloscope to ensure they are correct. Also use struct display_timing instead of struct drm_display_mode in order to also specify the minimum and maximum values. [0] https://embedded.avnet.com/product/g121ean01-0/ [1] https://embedded.avnet.com/product/g121ean01-4/ Fixes: 03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4 panel") Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230804151239.835216-1-luca.ceresoli@bootlin.com
2023-08-14drm/panel: JDI LT070ME05000 simplify with dev_err_probe()David Heidelberg
Use the dev_err_probe() helper to simplify error handling during probe. This also handle scenario, when EDEFER is returned and useless error is printed. Fixes error: panel-jdi-lt070me05000 4700000.dsi.0: cannot get enable-gpio -517 Signed-off-by: David Heidelberg <david@ixit.cz> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230812185239.378582-1-david@ixit.cz
2023-08-14drm/panel: JDI LT070ME05000 simplify with dev_err_probe()David Heidelberg
Use the dev_err_probe() helper to simplify error handling during probe. This also handle scenario, when EDEFER is returned and useless error is printed. Fixes error: panel-jdi-lt070me05000 4700000.dsi.0: cannot get enable-gpio -517 Signed-off-by: David Heidelberg <david@ixit.cz> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230812185239.378582-1-david@ixit.cz
generated by cgit (git 2.34.1) at 2025-07-18 20:14:00 +0000