summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/tegra
AgeCommit message (Collapse)Author
2021-08-10gpu: host1x: Add no-recovery modeMikko Perttunen
Add a new property for jobs to enable or disable recovery i.e. CPU increments of syncpoints to max value on job timeout. This allows for a more solid model for hanged jobs, where userspace doesn't need to guess if a syncpoint increment happened because the job completed, or because job timeout was triggered. On job timeout, we stop the channel, NOP all future jobs on the channel using the same syncpoint, mark the syncpoint as locked and resume the channel from the next job, if any. The future jobs are NOPed, since because we don't do the CPU increments, the value of the syncpoint is no longer synchronized, and any waiters would become confused if a future job incremented the syncpoint. The syncpoint is marked locked to ensure that any future jobs cannot increment the syncpoint either, until the application has recognized the situation and reallocated the syncpoint. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-07-28drm/bridge: Centralize error message when bridge attach failsLaurent Pinchart
Being informed of a failure to attach a bridge is useful, and many drivers prints an error message in that case. Move the message to drm_bridge_attach() to avoid code duplication. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
2021-07-21Merge tag 'drm-misc-next-2021-07-16' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.15: UAPI Changes: Cross-subsystem Changes: - udmabuf: Add support for mapping hugepages - Add dma-buf stats to sysfs. - Assorted fixes to fbdev/omap2. - dma-buf: Document DMA_BUF_IOCTL_SYNC - Improve dma-buf non-dynamic exporter expectations better. - Add module parameters for dma-buf size and list limit. - Add HDMI codec support to vc4, to replace vc4's own codec. - Document dma-buf implicit fencing rules. - dma_resv_test_signaled test_all handling. Core Changes: - Extract i915's eDP backlight code into DRM helpers. - Assorted docbook updates. - Rework drm_dp_aux documentation. - Add support for the DP aux bus. - Shrink dma-fence-chain slightly. - Add alloc/free helpers for dma-fence-chain. - Assorted fixes to TTM., drm/of, bridge - drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers. - Small fix for scheduler completion. - Remove use of drm_device.irq_enabled. - Print the driver name to dmesg when registering framebuffer. - Export drm/gem's shadow plane handling, and use it in vkms. - Assorted small fixes. Driver Changes: - Add eDP backlight to nouveau. - Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625, amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm. - Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU, EDT ETM0350G0DH6, Innolux EJ030NA panels. - Fix some simple pannels missing bus_format and connector types. - Add mks-guest-stats instrumentation support to vmwgfx. - Merge i915-ttm topic branch. - Make s6e63m0 panel use Mipi-DBI helpers. - Add detect() supoprt for AST. - Use interrupts for hotplug on vc4. - vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now. - vmwgfx now uses copies of vmware's internal device headers. - Slowly convert ti-sn65dsi83 over to atomic. - Rework amdgpu dma-resv handling. - Fix virtio fencing for planes. - Ensure amdgpu can always evict to SYSTEM. - Many drivers fixed for implicit fencing rules. - Set default prepare/cleanup fb for tiny, vram and simple helpers too. - Rework panfrost gpu reset and related serialization. - Update VKMS todo list. - Make bochs a tiny gpu driver, and use vram helper. - Use linux irq interfaces instead of drm_irq in some drivers. - Add support for Raspberry Pi Pico to GUD. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST # gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3 # gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired] # gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired] # gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired] # gpg: Note: This key has expired! # Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3 From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/444811c3-cbec-e9d5-9a6b-9632eda7962a@linux.intel.com
2021-07-01drm/aperture: Pass DRM driver structure instead of driver nameThomas Zimmermann
Print the name of the DRM driver when taking over fbdev devices. Makes the output to dmesg more consistent. Note that the driver name is only used for printing a string to the kernel log. No UAPI is affected by this change. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Chen-Yu Tsai <wens@csie.org> # sun4i Acked-by: Neil Armstrong <narmstrong@baylibre.com> # meson Link: https://patchwork.freedesktop.org/patch/msgid/20210629135833.22679-1-tzimmermann@suse.de
2021-06-29drm/tegra: Don't set struct drm_device.irq_enabledThomas Zimmermann
The field drm_device.irq_enabled is only used by legacy drivers with userspace modesetting. Don't set it in tegra. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-22-tzimmermann@suse.de
2021-06-23Merge tag 'drm/tegra/for-5.14-rc1' of ↵Dave Airlie
ssh://git.freedesktop.org/git/tegra/linux into drm-next drm/tegra: Changes for v5.14-rc1 The two major changes here are fixed YUV support as well as scaling on Tegra186 and later. This allows Tegra DRM to be used, for example, as a video sink for the kmssink gstreamer plugin. The remainder of the changes are minor fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210611165157.3569315-1-thierry.reding@gmail.com
2021-06-23Backmerge tag 'v5.13-rc7' into drm-nextDave Airlie
Backmerge Linux 5.13-rc7 to make some pulls from later bases apply, and to bake in the conflicts so far.
2021-06-11drm/tegra: Don't call SET_APPLICATION_ID in VIC bootMikko Perttunen
The application should be programming the application ID, not the kernel, as there can be several options to choose from, and setting the application ID multiple times can cause issues. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-11drm/tegra: Remove superfluous error messages around platform_get_irq()Tan Zhongjun
The platform_get_irq() prints error message telling that interrupt is missing,hence there is no need to duplicated that message in the drivers. Signed-off-by: Tan Zhongjun <tanzhongjun@yulong.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31drm/tegra: hub: Implement basic scaling supportThierry Reding
Parameterize code in several places to allow scaling of windows. Note that this currently still relies on static programming of the various metering and memory pool allocation registers. This seems to work for the common cases, but may eventually need to be updated to support use-cases with multiple windows and higher bandwidth and latency requirements. Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31drm/tegra: hub: Fix YUV supportThierry Reding
The driver currently exposes several YUV formats but fails to properly program all the registers needed to display such formats. Add the right programming sequences so that overlay windows can be used to accelerate color format conversions in multimedia playback use-cases. Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31drm/tegra: Correct DRM_FORMAT_MOD_NVIDIA_SECTOR_LAYOUTDmitry Osipenko
The format modifier is 64bit, while DRM_FORMAT_MOD_NVIDIA_SECTOR_LAYOUT uses BIT() macro that is 32bit on ARM32. The (modifier &= ~DRM_FORMAT_MOD_NVIDIA_SECTOR_LAYOUT) doesn't work as expected on ARM32 and tegra_fb_get_tiling() fails for the tiled formats on 32bit Tegra because modifier mask isn't applied properly. Use the BIT_ULL() macro to fix this trouble. Fixes: 7b6f846785f4 ("drm/tegra: Support sector layout on Tegra194") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-27drm/tegra: sor: Fix AUX device reference leakThierry Reding
In the case where the AUX provides an I2C-over-AUX DDC channel, a reference is taken on the AUX parent device of the DDC channel rather than the DDC channel like it would be for regular I2C controllers. To make sure the correct reference is dropped, move the unreferencing code into the SOR driver and make sure not to drop the I2C adapter reference in that case. Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-27drm/tegra: Get ref for DP AUX channel, not its ddc adapterLyude Paul
While we're taking a reference of the DDC adapter for a DP AUX channel in tegra_sor_probe() because we're going to be using that adapter with the SOR, now that we've moved where AUX registration happens the actual device structure for the DDC adapter isn't initialized yet. Which means that we can't really take a reference from it to try to keep it around anymore. This should be fine though, because we can just take a reference of its parent instead. v2: * Avoid calling i2c_put_adapter() in tegra_output_remove() for eDP/DP cases Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 39c17ae60ea9 ("drm/tegra: Don't register DP AUX channels before connectors") Cc: Lyude Paul <lyude@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-17drm/tegra: Fix shift overflow in tegra_shared_plane_atomic_updateNathan Chancellor
Clang warns: drivers/gpu/drm/tegra/hub.c:513:11: warning: shift count >= width of type [-Wshift-count-overflow] base |= BIT(39); ^~~~~~~ BIT is unsigned long, which is 32-bit on ARCH=arm, hence the overflow warning. Switch to BIT_ULL, which is 64-bit and will not overflow. Fixes: 7b6f846785f4 ("drm/tegra: Support sector layout on Tegra194") Link: https://github.com/ClangBuiltLinux/linux/issues/1351 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-17drm/tegra: sor: Fully initialize SOR before registrationThierry Reding
Before registering the SOR host1x client, make sure that it is fully initialized. This avoids a potential race condition between the SOR's probe and the host1x device initialization in cases where the SOR is the final sub-device to register to a host1x instance. Reported-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-17drm/tegra: sor: Do not leak runtime PM referencePavel Machek (CIP)
It's theoretically possible for the runtime PM reference to leak if the code fails anywhere between the pm_runtime_resume_and_get() and pm_runtime_put() calls, so make sure to release the runtime PM reference in that case. Practically this will never happen because none of the functions will fail on Tegra, but it's better for the code to be pedantic in case these assumptions will ever become wrong. Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> [treding@nvidia.com: add commit message] Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-11Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get v5.12 fixes. Requested for vmwgfx. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2021-04-30Merge tag 'drm/tegra/for-5.13-rc1' of ↵Dave Airlie
ssh://git.freedesktop.org/git/tegra/linux into drm-next drm/tegra: Changes for v5.13-rc1 The changes this time around contain a couple of fixes for host1x along with some improvements for Tegra DRM. Most notably the Tegra DRM driver now supports the hardware cursor on Tegra186 and later, more correctly reflects the capabilities of the display pipelines on various Tegra SoC generations and knows how to deal with the dGPU sector layout by using framebuffer modifiers. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210401164430.3349105-1-thierry.reding@gmail.com
2021-04-27drm/dp: Add backpointer to drm_device in drm_dp_auxLyude Paul
This is something that we've wanted for a while now: the ability to actually look up the respective drm_device for a given drm_dp_aux struct. This will also allow us to transition over to using the drm_dbg_*() helpers for debug message printing, as we'll finally have a drm_device to reference for doing so. Note that there is one limitation with this - because some DP AUX adapters exist as platform devices which are initialized independently of their respective DRM devices, one cannot rely on drm_dp_aux->drm_dev to always be non-NULL until drm_dp_aux_register() has been called. We make sure to point this out in the documentation for struct drm_dp_aux. v3: * Add WARN_ON_ONCE() to drm_dp_aux_register() if drm_dev isn't filled out Signed-off-by: Lyude Paul <lyude@redhat.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-4-lyude@redhat.com Reviewed-by: Dave Airlie <airlied@redhat.com>
2021-04-26Merge drm/drm-next into drm-misc-nextMaxime Ripard
Christian needs some patches from drm/next Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-04-15drm/tegra: Don't set allow_fb_modifiers explicitlyDaniel Vetter
Since commit 890880ddfdbe256083170866e49c87618b706ac7 Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Date: Fri Jan 4 09:56:10 2019 +0100 drm: Auto-set allow_fb_modifiers when given modifiers at plane init this is done automatically as part of plane init, if drivers set the modifier list correctly. Which is the case here. It was slightly inconsistently though, since planes with only linear modifier support haven't listed that explicitly. Fix that, and cc: stable to allow userspace to rely on this. Again don't backport further than where Paul's patch got added. Cc: stable@vger.kernel.org # v5.1 + Cc: Pekka Paalanen <pekka.paalanen@collabora.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-tegra@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-10-daniel.vetter@ffwll.ch
2021-04-14drm/aperture: Convert drivers to aperture interfacesThomas Zimmermann
Mass-convert all drivers from FB helpers to aperture interfaces. No functional changes besides checking for returned errno codes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-3-tzimmermann@suse.de
2021-04-13Merge drm/drm-fixes into drm-nextDaniel Vetter
msm-next pull request has a baseline with stuff from -fixes, roll forward first. Some simple conflicts in amdgpu, ttm and one in i915 where git gets confused and tries to add the same function twice. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-04-08drm/tegra: Don't register DP AUX channels before connectorsLyude Paul
As pointed out by the documentation for drm_dp_aux_register(), drm_dp_aux_init() should be used in situations where the AUX channel for a display driver can potentially be registered before it's respective DRM driver. This is the case with Tegra, since the DP aux channel exists as a platform device instead of being a grandchild of the DRM device. Since we're about to add a backpointer to a DP AUX channel's respective DRM device, let's fix this so that we don't potentially allow userspace to use the AUX channel before we've associated it with it's DRM connector. Signed-off-by: Lyude Paul <lyude@redhat.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-3-lyude@redhat.com
2021-03-31drm/tegra: Support sector layout on Tegra194Thierry Reding
Tegra194 has a special physical address bit that enables some memory swizzling logic to support different sector layouts. Support the bit that selects the sector layout which is passed in the framebuffer modifier. Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-31drm/tegra: Count number of display controllers at runtimeThierry Reding
In order to be able to attach planes to all possible display controllers the exact number of CRTCs must be known. Keep track of the number of the display controllers that register during initialization. Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-31drm/tegra: gem: Add a clarifying commentThierry Reding
Clarify when a fixed IOV address can be used and when a buffer has to be mapped before the IOVA can be used. Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-31drm/tegra: fb: Add diagnostics for framebuffer modifiersThierry Reding
Add a debug message to let the user know when a framebuffer modifier is not supported. Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-31drm/tegra: dc: Implement hardware cursor on Tegra186 and laterThierry Reding
The hardware cursor on Tegra186 differs slightly from the implementation on older SoC generations. In particular the new implementation relies on software for clipping the cursor against the screen. Fortunately, atomic KMS already computes clipped coordinates for (cursor) planes, so this is trivial to implement. The format supported by the hardware cursor is also slightly different. v2: use more drm_rect helpers (Dmitry) Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-31drm/tegra: dc: Parameterize maximum resolutionThierry Reding
Tegra186 and later support a higher maximum resolution than earlier chips, so make sure to reflect that in the mode configuration. Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-31drm/tegra: dc: Inherit DMA maskThierry Reding
Inherit the DMA mask from host1x (on Tegra210 and earlier) or the display hub (on Tegra186 and later). This is necessary in order to properly map buffers without SMMU support and use the maximum IOVA space available with SMMU support. Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-31gpu: host1x: Reserve VBLANK syncpoints at initializationMikko Perttunen
On T20-T148 chips, the bootloader can set up a boot splash screen with DC configured to increment syncpoint 26/27 at VBLANK. Because of this we shouldn't allow these syncpoints to be allocated until DC has been reset and will no longer increment them in the background. As such, on these chips, reserve those two syncpoints at initialization, and only mark them free once the DC driver has indicated it's safe to do so. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-31gpu: host1x: Cleanup and refcounting for syncpointsMikko Perttunen
Add reference counting for allocated syncpoints to allow keeping them allocated while jobs are referencing them. Additionally, clean up various places using syncpoint IDs to use host1x_syncpt pointers instead. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-30Merge branch 'drm/tegra/fixes' into drm/tegra/for-nextThierry Reding
2021-03-30drm/tegra: sor: Grab runtime PM reference across resetThierry Reding
The SOR resets are exclusively shared with the SOR power domain. This means that exclusive access can only be granted temporarily and in order for that to work, a rigorous sequence must be observed. To ensure that a single consumer gets exclusive access to a reset, each consumer must implement a rigorous protocol using the reset_control_acquire() and reset_control_release() functions. However, these functions alone don't provide any guarantees at the system level. Drivers need to ensure that the only a single consumer has access to the reset at the same time. In order for the SOR to be able to exclusively access its reset, it must therefore ensure that the SOR power domain is not powered off by holding on to a runtime PM reference to that power domain across the reset assert/deassert operation. This used to work fine by accident, but was revealed when recently more devices started to rely on the SOR power domain. Fixes: 11c632e1cfd3 ("drm/tegra: sor: Implement acquire/release for reset") Reported-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-30drm/tegra: dc: Restore coupling of display controllersThierry Reding
Coupling of display controllers used to rely on runtime PM to take the companion controller out of reset. Commit fd67e9c6ed5a ("drm/tegra: Do not implement runtime PM") accidentally broke this when runtime PM was removed. Restore this functionality by reusing the hierarchical host1x client suspend/resume infrastructure that's similar to runtime PM and which perfectly fits this use-case. Fixes: fd67e9c6ed5a ("drm/tegra: Do not implement runtime PM") Reported-by: Dmitry Osipenko <digetx@gmail.com> Reported-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-30drm/tegra: dc: Don't set PLL clock to 0HzDmitry Osipenko
RGB output doesn't allow to change parent clock rate of the display and PCLK rate is set to 0Hz in this case. The tegra_dc_commit_state() shall not set the display clock to 0Hz since this change propagates to the parent clock. The DISP clock is defined as a NODIV clock by the tegra-clk driver and all NODIV clocks use the CLK_SET_RATE_PARENT flag. This bug stayed unnoticed because by default PLLP is used as the parent clock for the display controller and PLLP silently skips the erroneous 0Hz rate changes because it always has active child clocks that don't permit rate changes. The PLLP isn't acceptable for some devices that we want to upstream (like Samsung Galaxy Tab and ASUS TF700T) due to a display panel clock rate requirements that can't be fulfilled by using PLLP and then the bug pops up in this case since parent clock is set to 0Hz, killing the display output. Don't touch DC clock if pclk=0 in order to fix the problem. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-16Merge tag 'drm-misc-next-2021-03-03' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - %p4cc printk format modifier - atomic: introduce drm_crtc_commit_wait, rework atomic plane state helpers to take the drm_commit_state structure - dma-buf: heaps rework to return a struct dma_buf - simple-kms: Add plate state helpers - ttm: debugfs support, removal of sysfs Driver Changes: - Convert drivers to shadow plane helpers - arc: Move to drm/tiny - ast: cursor plane reworks - gma500: Remove TTM and medfield support - mxsfb: imx8mm support - panfrost: MMU IRQ handling rework - qxl: rework to better handle resources deallocation, locking - sun4i: Add alpha properties for UI and VI layers - vc4: RPi4 CEC support - vmwgfx: doc cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour
2021-02-25drm: Use state helper instead of the plane state pointerMaxime Ripard
Many drivers reference the plane->state pointer in order to get the current plane state in their atomic_update or atomic_disable hooks, which would be the new plane state in the global atomic state since _swap_state happened when those hooks are run. Use the drm_atomic_get_new_plane_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ adds_new_state @ identifier plane_atomic_func.func; identifier plane, state; identifier new_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *new_state = plane->state; + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane); ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
2021-02-25drm/atomic: Pass the full state to planes atomic disable and updateMaxime Ripard
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert the remaining helpers to provide a consistent interface, this time with the planes atomic_update and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_disable)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier crtc_state; identifier plane, plane_state, state; expression e; @@ f(struct drm_crtc_state *crtc_state) { ... struct drm_atomic_state *state = e; <+... ( - FUNCS->atomic_disable(plane, plane_state) + FUNCS->atomic_disable(plane, state) | - FUNCS->atomic_update(plane, plane_state) + FUNCS->atomic_update(plane, state) ) ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *old_plane_state) { <... - state + old_plane_state ...> } @ ignores_old_state @ identifier plane_atomic_func.func; identifier plane, old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... when != old_state } @ adds_old_state depends on plane_atomic_func && !ignores_old_state @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *plane_state) { + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <+... - plane_state->state + state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech
2021-02-24drm: Rename plane->state variables in atomic update and disableMaxime Ripard
Some drivers are storing the plane->state pointer in atomic_update and atomic_disable in a variable simply called state, while the state passed as an argument is called old_state. In order to ease subsequent reworks and to avoid confusing or inconsistent names, let's rename those variables to new_state. This was done using the following coccinelle script, plus some manual changes for mtk and tegra. @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_state = plane->state; ... } @ depends on moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + new_state ...> } @ moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; symbol oldstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *oldstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *newstate = plane->state; ... } @ depends on moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + newstate ...> } @ moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; symbol old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_pstate = plane->state; ... } @ depends on moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; identifier old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { <... - state + new_pstate ...> } Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-8-maxime@cerno.tech
2021-02-24drm: Store new plane state in a variable for atomic_update and disableMaxime Ripard
In order to store the new plane state in a subsequent helper, let's move the plane->state dereferences into a variable. This was done using the following coccinelle script, plus some hand changes for vmwgfx: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ has_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { + struct drm_plane_state *new_state = plane->state; <+... - plane->state + new_state ...+> } @ has_new_state_state @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { + struct drm_plane_state *new_plane_state = plane->state; <+... - plane->state + new_plane_state ...+> } @ has_new_state_old_s @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol old_s; @@ func(struct drm_plane *plane, struct drm_plane_state *old_s) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_old_s @ identifier plane_atomic_func.func; identifier plane; symbol old_s; @@ func(struct drm_plane *plane, struct drm_plane_state *old_s) { + struct drm_plane_state *new_s = plane->state; <+... - plane->state + new_s ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes atomic_checkMaxime Ripard
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_check. The conversion was done using the coccinelle script below plus some manual changes for vmwgfx, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_check(plane, plane_state) + FUNCS->atomic_check(plane, state) ...+> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *new_plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
2021-02-24drm: Rename plane atomic_check state namesMaxime Ripard
Most drivers call the argument to the plane atomic_check hook simply state, which is going to conflict with the global atomic state in a later rework. Let's rename it to new_plane_state (or new_state depending on the convention used in the driver). This was done using the coccinelle script below, and built tested: @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { .atomic_check = func, }; @ has_old_state @ identifier plane_atomic_func.func; identifier plane; expression e; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *old_state = e; ... } @ depends on has_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_state ) { <+... - state + new_state ...+> } @ has_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... } @ depends on has_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_plane_state ) { <+... - state + new_plane_state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-2-maxime@cerno.tech
2021-02-23drm/tegra: Annotate dma-fence critical section in commit pathDaniel Vetter
Again ends just after drm_atomic_helper_commit_hw_done(), but with the twist that we need to make sure we're only annotate the custom version. And not the other clause which just calls drm_atomic_helper_commit_tail_rpm(), which is already annotated. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-tegra@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-11-daniel.vetter@ffwll.ch
2021-02-23drm/gem: Move drm_gem_fb_prepare_fb() to GEM atomic helpersThomas Zimmermann
The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting, but currently located next to framebuffer helpers. Move it to GEM atomic helpers, rename it slightly and adopt the drivers. Same for the rsp simple-pipe helper. Compile-tested with x86-64, aarch64 and arm. The patch is fairly large, but there are no functional changes. v3: * remove out-comented line in drm_gem_framebuffer_helper.h (Maxime) v2: * rename to drm_gem_plane_helper_prepare_fb() (Daniel) * add tutorial-style documentation Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210222141756.7864-1-tzimmermann@suse.de
2021-01-15drm/tegra: Fix reference leak when pm_runtime_get_sync() failsQinglang Miao
The PM reference count is not expected to be incremented on return in these Tegra functions. However, pm_runtime_get_sync() will increment the PM reference count even on failure. Forgetting to put the reference again will result in a leak. Replace it with pm_runtime_resume_and_get() to keep the usage counter balanced. Fixes: fd67e9c6ed5a ("drm/tegra: Do not implement runtime PM") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-01-15drm/tegra: gr2d: Add compatible for Tegra114Dmitry Osipenko
Tegra114 has GR2D hardware block, support it by the 2D driver. Tested-by: Anton Bambura <jenneron@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-01-15drm/tegra: gr2d: Correct swapped device-tree compatiblesDmitry Osipenko
The device-tree compatibles are swapped in the code, correct them. Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
generated by cgit (git 2.34.1) at 2025-07-18 09:55:48 +0000