summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/vc4
AgeCommit message (Collapse)Author
2021-05-25drm/vc4: hdmi: Fix PM reference leak in vc4_hdmi_encoder_pre_crtc_co()Zou Wei
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/1621840854-105978-1-git-send-email-zou_wei@huawei.com
2021-05-24drm/vc4: hdmi: Add a workqueue to set scramblingMaxime Ripard
It looks like some displays (like the LG 27UL850-W) don't enable the scrambling when the HDMI driver enables it. However, if we set later the scrambler enable bit, the display will work as expected. Let's create delayed work queue to periodically look at the display scrambling status, and if it's not set yet try to enable it again. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-12-maxime@cerno.tech
2021-05-24drm/vc4: hdmi: Enable the scramblerMaxime Ripard
The HDMI controller on the BCM2711 includes a scrambler in order to reach the HDMI 2.0 modes that require it. Let's add the support for it. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-11-maxime@cerno.tech
2021-05-24drm/vc4: hdmi: Check and warn if we can't reach 4kp60 frequenciesMaxime Ripard
In order to reach the frequencies needed to output at 594MHz, the firmware needs to be configured with the appropriate parameters in the config.txt file (enable_hdmi_4kp60 and force_turbo). Let's detect it at bind time, warn the user if we can't, and filter out the relevant modes. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-10-maxime@cerno.tech
2021-05-24drm/vc4: hdmi: Properly compute the BVB clock rateMaxime Ripard
The BVB clock rate computation doesn't take into account a mode clock of 594MHz that we're going to need to support 4k60. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-9-maxime@cerno.tech
2021-05-24drm/vc4: hvs: Make the HVS bind firstMaxime Ripard
We'll need to have the HVS binding before the HDMI controllers so that we can check whether the firmware allows to run in 4kp60. Reorder a bit the component list, and document the current constraints we're aware of. Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-8-maxime@cerno.tech
2021-05-24drm/vc4: hdmi: Prevent clock unbalanceMaxime Ripard
Since we fixed the hooks to disable the encoder at boot, we now have an unbalanced clk_disable call at boot since we never enabled them in the first place. Let's mimic the state of the hardware and enable the clocks at boot if the controller is enabled to get the use-count right. Cc: <stable@vger.kernel.org> # v5.10+ Fixes: 09c438139b8f ("drm/vc4: hdmi: Implement finer-grained hooks") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-7-maxime@cerno.tech
2021-05-24drm/vc4: crtc: Lookup the encoder from the register at bootMaxime Ripard
At boot, we can't rely on the vc4_get_crtc_encoder since we don't have a state yet and thus will not be able to figure out which connector is attached to our CRTC. However, we have a muxing bit in the CRTC register we can use to get the encoder currently connected to the pixelvalve. We can thus read that register, lookup the associated register through the vc4_pv_data structure, and then pass it to vc4_crtc_disable so that we can perform the proper operations. Fixes: 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot time") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-6-maxime@cerno.tech
2021-05-24drm/vc4: crtc: Fix vc4_get_crtc_encoder logicMaxime Ripard
The vc4_get_crtc_encoder function currently only works when the connector->state->crtc pointer is set, which is only true when the connector is currently enabled. However, we use it as part of the disable path as well, and our lookup will fail in that case, resulting in it returning a null pointer we can't act on. We can access the connector that used to be connected to that crtc though using the old connector state in the disable path. Since we want to support both the enable and disable path, we can support it by passing the state accessor variant as a function pointer, together with the atomic state. Fixes: 792c3132bc1b ("drm/vc4: encoder: Add finer-grained encoder callbacks") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-5-maxime@cerno.tech
2021-05-24drm/vc4: crtc: Pass the drm_atomic_state to config_pvMaxime Ripard
The vc4_crtc_config_pv will need to access the drm_atomic_state structure and its only parent function, vc4_crtc_atomic_enable already has access to it. Let's pass it as a parameter. Fixes: 792c3132bc1b ("drm/vc4: encoder: Add finer-grained encoder callbacks") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-4-maxime@cerno.tech
2021-05-24drm/vc4: crtc: Skip the TXPMaxime Ripard
The vc4_set_crtc_possible_masks is meant to run over all the encoders and then set their possible_crtcs mask to their associated pixelvalve. However, since the commit 39fcb2808376 ("drm/vc4: txp: Turn the TXP into a CRTC of its own"), the TXP has been turned to a CRTC and encoder of its own, and while it does indeed register an encoder, it no longer has an associated pixelvalve. The code will thus run over the TXP encoder and set a bogus possible_crtcs mask, overriding the one set in the TXP bind function. In order to fix this, let's skip any virtual encoder. Cc: <stable@vger.kernel.org> # v5.9+ Fixes: 39fcb2808376 ("drm/vc4: txp: Turn the TXP into a CRTC of its own") Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-3-maxime@cerno.tech
2021-05-24drm/vc4: txp: Properly set the possible_crtcs maskMaxime Ripard
The current code does a binary OR on the possible_crtcs variable of the TXP encoder, while we want to set it to that value instead. Cc: <stable@vger.kernel.org> # v5.9+ Fixes: 39fcb2808376 ("drm/vc4: txp: Turn the TXP into a CRTC of its own") Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-2-maxime@cerno.tech
2021-05-24drm/vc4: Separate VEC compatible variantsMateusz Kwiatkowski
The VEC's DAC on BCM2711 is slightly different compared to the one on BCM283x and needs different configuration. In particular, bit 3 (mask 0x8) switches the BCM2711 DAC input to "self-test input data", which makes the output unusable. Separating two compatible variants in devicetrees and the DRM driver was therefore necessary. The configurations used for both variants have been borrowed from Raspberry Pi (model 3B for BCM283x, 4B for BCM2711) firmware defaults. Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210520150344.273900-4-maxime@cerno.tech
2021-05-24drm/vc4: Fix clock source for VEC PixelValve on BCM2711Mateusz Kwiatkowski
On the BCM2711 (Raspberry Pi 4), the VEC is actually connected to output 2 of pixelvalve3. NOTE: This contradicts the Broadcom docs, but has been empirically tested and confirmed by Raspberry Pi firmware devs. Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210520150344.273900-2-maxime@cerno.tech
2021-05-19Merge tag 'drm-misc-next-2021-05-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.14: UAPI Changes: * drm: Disable connector force-probing for non-master clients * drm: Enforce consistency between IN_FORMATS property and cap + related driver cleanups * drm/amdgpu: Track devices, process info and fence info via /proc/<pid>/fdinfo * drm/ioctl: Mark AGP-related ioctls as legacy * drm/ttm: Provide tt_shrink file to trigger shrinker via debugfs; Cross-subsystem Changes: * fbdev/efifb: Special handling of non-PCI devices * fbdev/imxfb: Fix error message Core Changes: * drm: Add connector helper to attach HDR-metadata property and convert drivers * drm: Add connector helper to compare HDR-metadata and convert drivers * drm: Add conenctor helper to attach colorspace property * drm: Signal colorimetry in HDMI infoframe * drm: Support pitch for destination buffers; Add blitter function with generic format conversion * drm: Remove struct drm_device.pdev and update legacy drivers * drm: Remove obsolete DRM_KMS_FB_HELPER config option in core and drivers * drm: Remove obsolete drm_pci_alloc/drm_pci_free * drm/aperture: Add helpers for aperture ownership and convert drivers, replaces rsp fbdev helpers * drm/agp: Mark DRM AGP code as legacy and convert legacy drivers * drm/atomic-helpers: Cleanups * drm/dp: Handle downstream port counts of 0 correctly; AUX channel fixes; Use drm_err_*/drm_dbg_*(); Cleanups * drm/dp_dual_mode: Use drm_err_*/drm_dbg_*() * drm/dp_mst: Use drm_err_*/drm_dbg_*(); Use Extended Base Receiver Capability DPCD space * drm/gem-ttm-helper: Provide helper for dumb_map_offset and convert drivers * drm/panel: Use sysfs_emit; panel-simple: Use runtime PM, Power up panel when reading EDID, Cache EDID, Cleanups; Lms397KF04: DT bindings * drm/pci: Mark AGP helpers as legacy * drm/print: Handle NULL for DRM devices gracefully * drm/scheduler: Change scheduled fence track * drm/ttm: Don't count SG BOs against pages_limit; Warn about freeing pinned BOs; Fix error handling if no BO can be swapped out; Move special handling of non-GEM drivers into vmwgfx; Move page_alignment into the BO; Set drm-misc as TTM tree in MAINTAINERS; Cleanup ttm_agp_backend; Add ttm_sys_manager for system domain; Cleanups Driver Changes: * drm: Don't set allow_fb_modifiers explictly in drivers * drm/amdgpu: Pin/unpin fixes wrt to TTM; Use bo->base.size instead of mem->num_pages * drm/ast: Use managed pcim_iomap(); Fix EDID retrieval with DP501 * drm/bridge: MHDP8546: HDCP support + DT bindings, Register DP AUX channel with userspace; Sil8620: Fix module dependencies; dw-hdmi: Add option to not load CEC driver; Fix stopping in drm_bridge_chain_pre_enable(); Ti-sn65dsi86: Fix refclk handling, Break GPIO and MIPI-to-eDP into subdrivers, Use pm_runtime autosuspend, cleanups; It66121: Add driver + DT bindings; Adv7511: Support I2S IEC958 encoding; Anx7625: fix power-on delay; Nwi-dsi: Modesetting fixes; Cleanups * drm/bochs: Support screen blanking * drm/gma500: Cleanups * drm/gud: Cleanups * drm/i915: Use correct max source link rate for MST * drm/kmb: Cleanups * drm/meson: Disable dw-hdmi CEC driver * drm/nouveau: Pin/unpin fixes wrt to TTM; Use bo->base.size instead of mem->num_pages; Register AUX adapters after their connectors * drm/qxl: Fix shadow BO unpin * drm/radeon: Duplicate some DRM AGP code to uncouple from legacy drivers * drm/simpledrm: Add a generic DRM driver for simple-framebuffer devices * drm/tiny: Fix log spam if probe function gets deferred * drm/vc4: Add support for HDR-metadata property; Cleanups * drm/virtio: Create dumb BOs as guest blobs; * drm/vkms: Use managed drmm_universal_plane_alloc(); Add XRGB plane composition; Add overlay support * drm/vmwgfx: Enable console with DRM_FBDEV_EMULATION; Fix CPU updates of coherent multisample surfaces; Remove reservation semaphore; Add initial SVGA3 support; Support amd64; Use 1-based IDR; Use min_t(); Cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YJvkD523evviED01@linux-uq9g.fritz.box
2021-05-11drm/vc4: Remove redundant error printing in vc4_ioremap_regs()Zhen Lei
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210511092923.4617-1-thunder.leizhen@huawei.com
2021-05-11Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard
Start this new release drm-misc-fixes branch Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-05-07drm/vc4: hdmi: Signal the proper colorimetry info in the infoframeMaxime Ripard
Our driver while supporting HDR didn't send the proper colorimetry info in the AVI infoframe. Let's add the property needed so that the userspace can let us know what the colorspace is supposed to be. Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210430094451.2145002-5-maxime@cerno.tech
2021-05-07drm/vc4: Add HDR metadata property to the VC5 HDMI connectorsDave Stevenson
Now that we can export deeper colour depths, add in the signalling for HDR metadata. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210430094451.2145002-3-maxime@cerno.tech
2021-04-29drm/vc4: fix argument ordering in vc4_crtc_get_margins()Dan Carpenter
Cppcheck complains that the declaration doesn't match the function definition. Obviously "left" should come before "right". The caller and the function implementation are done this way, it's just the declaration which is wrong so this doesn't affect runtime. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/YH/720FD978TPhHp@mwanda
2021-04-26Merge drm/drm-next into drm-misc-nextMaxime Ripard
Christian needs some patches from drm/next Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-04-21drm/vc4: remove unused functionJiapeng Chong
Fix the following clang warning: drivers/gpu/drm/vc4/vc4_vec.c:201:1: warning: unused function 'to_vc4_vec_connector' [-Wunused-function]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/1618476325-112629-1-git-send-email-jiapeng.chong@linux.alibaba.com
2021-04-15drm/vc4: Don't set allow_fb_modifiers explicitlyDaniel Vetter
Since commit 890880ddfdbe256083170866e49c87618b706ac7 Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Date: Fri Jan 4 09:56:10 2019 +0100 drm: Auto-set allow_fb_modifiers when given modifiers at plane init this is done automatically as part of plane init, if drivers set the modifier list correctly. Which is the case here. Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Eric Anholt <eric@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-11-daniel.vetter@ffwll.ch
2021-04-14drm/aperture: Convert drivers to aperture interfacesThomas Zimmermann
Mass-convert all drivers from FB helpers to aperture interfaces. No functional changes besides checking for returned errno codes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-3-tzimmermann@suse.de
2021-04-13Merge drm/drm-fixes into drm-nextDaniel Vetter
msm-next pull request has a baseline with stuff from -fixes, roll forward first. Some simple conflicts in amdgpu, ttm and one in i915 where git gets confused and tries to add the same function twice. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-04-08drm/vc4: crtc: Reduce PV fifo threshold on hvs4Dom Cobley
Experimentally have found PV on hvs4 reports fifo full error with expected settings and does not with one less This appears as: [drm:drm_atomic_helper_wait_for_flip_done] *ERROR* [CRTC:82:crtc-3] flip_done timed out with bit 10 of PV_STAT set "HVS driving pixels when the PV FIFO is full" Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.") Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161328.1471556-3-maxime@cerno.tech
2021-04-08drm/vc4: plane: Remove redundant assignmentMaxime Ripard
The vc4_plane_atomic_async_update function assigns twice in a row the src_h field in the drm_plane_state structure to the same value. Remove the second one. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161328.1471556-2-maxime@cerno.tech
2021-03-16Merge tag 'drm-misc-next-2021-03-03' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - %p4cc printk format modifier - atomic: introduce drm_crtc_commit_wait, rework atomic plane state helpers to take the drm_commit_state structure - dma-buf: heaps rework to return a struct dma_buf - simple-kms: Add plate state helpers - ttm: debugfs support, removal of sysfs Driver Changes: - Convert drivers to shadow plane helpers - arc: Move to drm/tiny - ast: cursor plane reworks - gma500: Remove TTM and medfield support - mxsfb: imx8mm support - panfrost: MMU IRQ handling rework - qxl: rework to better handle resources deallocation, locking - sun4i: Add alpha properties for UI and VI layers - vc4: RPi4 CEC support - vmwgfx: doc cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour
2021-02-25drm/atomic: Pass the full state to planes atomic disable and updateMaxime Ripard
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert the remaining helpers to provide a consistent interface, this time with the planes atomic_update and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_disable)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier crtc_state; identifier plane, plane_state, state; expression e; @@ f(struct drm_crtc_state *crtc_state) { ... struct drm_atomic_state *state = e; <+... ( - FUNCS->atomic_disable(plane, plane_state) + FUNCS->atomic_disable(plane, state) | - FUNCS->atomic_update(plane, plane_state) + FUNCS->atomic_update(plane, state) ) ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *old_plane_state) { <... - state + old_plane_state ...> } @ ignores_old_state @ identifier plane_atomic_func.func; identifier plane, old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... when != old_state } @ adds_old_state depends on plane_atomic_func && !ignores_old_state @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *plane_state) { + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <+... - plane_state->state + state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes atomic_checkMaxime Ripard
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_check. The conversion was done using the coccinelle script below plus some manual changes for vmwgfx, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_check(plane, plane_state) + FUNCS->atomic_check(plane, state) ...+> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *new_plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
2021-02-24drm: Rename plane atomic_check state namesMaxime Ripard
Most drivers call the argument to the plane atomic_check hook simply state, which is going to conflict with the global atomic state in a later rework. Let's rename it to new_plane_state (or new_state depending on the convention used in the driver). This was done using the coccinelle script below, and built tested: @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { .atomic_check = func, }; @ has_old_state @ identifier plane_atomic_func.func; identifier plane; expression e; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *old_state = e; ... } @ depends on has_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_state ) { <+... - state + new_state ...+> } @ has_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... } @ depends on has_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_plane_state ) { <+... - state + new_plane_state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-2-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes async atomic check and updateMaxime Ripard
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_async_check and atomic_async_update. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_async_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_async_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_async_check = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_async_update = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_async_check(plane, plane_state) + FUNCS->atomic_async_check(plane, state) ...+> } @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_async_update(plane, plane_state) + FUNCS->atomic_async_update(plane, state) ...+> } @@ identifier mtk_plane_atomic_async_update; identifier plane; symbol new_state, state; expression e; @@ void mtk_plane_atomic_async_update(struct drm_plane *plane, struct drm_plane_state *new_state) { ... - struct mtk_plane_state *state = e; + struct mtk_plane_state *new_plane_state = e; <+... - state + new_plane_state ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *new_plane_state) { <... - state + new_plane_state ...> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <+... - plane_state->state + state ...+> } Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-1-maxime@cerno.tech
2021-02-23drm/gem: Move drm_gem_fb_prepare_fb() to GEM atomic helpersThomas Zimmermann
The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting, but currently located next to framebuffer helpers. Move it to GEM atomic helpers, rename it slightly and adopt the drivers. Same for the rsp simple-pipe helper. Compile-tested with x86-64, aarch64 and arm. The patch is fairly large, but there are no functional changes. v3: * remove out-comented line in drm_gem_framebuffer_helper.h (Maxime) v2: * rename to drm_gem_plane_helper_prepare_fb() (Daniel) * add tutorial-style documentation Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210222141756.7864-1-tzimmermann@suse.de
2021-02-21Merge tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "A pretty normal tree, lots of refactoring across the board, ttm, i915, nouveau, and bunch of features in various drivers. docs: - lots of updated docs core: - require crtc to have unique primary plane - fourcc macro fix - PCI bar quirk for bar resizing - don't sent hotplug on error - move vm code to legacy - nuke hose only used on old oboslete alpha dma-buf: - kernel doc updates - improved lock tracking dp/hdmi: - DP-HDMI2.1 protocol converter support ttm: - bo size handling cleanup - release a pinned bo warning - cleanup lru handler - avoid using pages with drm_prime_sg_to_page_addr_arrays cma-helper: - prime/mmap fixes bridge: - add DP support gma500: - remove gma3600 support i915: - try eDP fast/narrow link again with fallback - Intel eDP backlight control - replace display register read/write macros - refactor intel_display.c - display power improvements - HPD code cleanup - Rocketlake display fixes - Power/backlight/RPM fixes - DG1 display fix - IVB/BYT clear residuals security fix again - make i915 mitigations options via parameter - HSW GT1 GPU hangs fixes - DG1 workaround hang fixes - TGL DMAR hang avoidance - Lots of GT fixes - follow on fixes for residuals clear - gen7 per-engine-reset support - HDCP2.2 + HDCP1.4 GEN12 DP MST support - TGL clear color support - backlight refactoring - VRR/Adaptive sync enabling on DP/EDP for TGL+ - async flips for all ilk+ amdgpu: - rework IH ring handling (Vega/Navi) - rework HDP handling (Vega/Navi) - swSMU updates for renoir/vangogh - Sienna Cichild overdrive support - FP16 on DCE8-11 support - GPU reset on navy flounder/vangogh - SMU profile fixes for APU - SR-IOV fixes - Vangogh SMU fixes - fan speed control fixes amdkfd: - config handling fix - buffer free fix - recursive lock warnings fix nouveau: - Turing MMU fault recovery fixes - mDP connectors reporting fix - audio locking fixes - rework engines/instances code to support new scheme tegra: - VIC newer firmware support - display/gr2d fixes for older tegra - pm reference leak fix mediatek: - SOC MT8183 support - decouple sub driver + share mtk mutex driver radeon: - PCI resource fix for some platforms ingenic: - pm support - 8-bit delta RGB panels vmwgfx: - managed driver helpers vc4: - BCM2711 DSI1 support - converted to atomic helpers - enable 10/12 bpc outputs - gem prime mmap helpers - CEC fix omap: - use degamma table - CTM support - rework DSI support imx: - stack usage fixes - drm managed support - imx-tve clock provider leak fix - rcar-du: - default mode fixes - conversion to managed API hisilicon: - use simple encoder vkms: - writeback connector support d3: - BT2020 support" * tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drm: (1459 commits) drm/amdgpu: Set reference clock to 100Mhz on Renoir (v2) drm/radeon: OLAND boards don't have VCE drm/amdkfd: Fix recursive lock warnings drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth() drm/amd/display: Fix potential integer overflow drm/amdgpu/display: remove hdcp_srm sysfs on device removal drm/amdgpu: fix CGTS_TCC_DISABLE register offset on gfx10.3 drm/i915/gt: Correct surface base address for renderclear drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling drm/nouveau/top/ga100: initial support drm/nouveau/top: add ioctrl/nvjpg drm/nouveau/privring: rename from ibus drm/nouveau/nvkm: remove nvkm_subdev.index drm/nouveau/nvkm: determine subdev id/order from layout drm/nouveau/vic: switch to instanced constructor drm/nouveau/sw: switch to instanced constructor drm/nouveau/sec2: switch to instanced constructor drm/nouveau/sec: switch to instanced constructor drm/nouveau/pm: switch to instanced constructor drm/nouveau/nvenc: switch to instanced constructor ...
2021-02-09drm/vc4: remove unneeded variable: "ret"Bernard Zhao
remove unneeded variable: "ret". Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210202122338.15351-1-bernard@vivo.com (cherry picked from commit f0c5a89e534b43bfef8e7bf7baa5624cd84e1e18) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Don't register the CEC adapter if there's no interruptsMaxime Ripard
We introduced the BCM2711 support to the vc4 HDMI controller with 5.10, but this was lacking any of the interrupts of the CEC controller so we have to deal with the backward compatibility. Do so by simply ignoring the CEC setup if the DT doesn't have the interrupts property. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-13-maxime@cerno.tech (cherry picked from commit 4d03ed7ad731a2cf922fa37246fb7068a52f18ff) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Remove cec_available flagDom Cobley
Now that our HDMI controller supports CEC for the BCM2711, let's remove that flag. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-12-maxime@cerno.tech (cherry picked from commit f551863af919edd60f76a24126da3ac10294ace1) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Support BCM2711 CEC interrupt setupMaxime Ripard
The HDMI controller found in the BCM2711 has an external interrupt controller for the CEC and hotplug interrupt shared between the two instances. Let's add a variant flag to register a single interrupt handler and deals with the interrupt handler setup, or two interrupt handlers relying on an external irqchip. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-11-maxime@cerno.tech (cherry picked from commit ad6380e9aaf459c22006c73fd3d4dd6f41e8f048) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Split the interrupt handlersMaxime Ripard
The BCM2711 has two different interrupt sources to transmit and receive CEC messages, provided through an external interrupt chip shared between the two HDMI interrupt controllers. The rest of the CEC controller is identical though so we need to change a bit the code organisation to share the code as much as possible, yet still allowing to register independent handlers. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-10-maxime@cerno.tech (cherry picked from commit 0c38490a031071c0d81b400949f43ea6f4b0cd8f) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Introduce a CEC clockMaxime Ripard
While the BCM2835 had the CEC clock derived from the HSM clock, the BCM2711 has a dedicated parent clock for it. Let's introduce a separate clock for it so that we can handle both cases. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-9-maxime@cerno.tech (cherry picked from commit cd7f016c93b697dea79a884162cbf7311283fe12) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Update the CEC clock divider on HSM rate changeMaxime Ripard
As part of the enable sequence we might change the HSM clock rate if the pixel rate is different than the one we were already dealing with. On the BCM2835 however, the CEC clock derives from the HSM clock so any rate change will need to be reflected in the CEC clock divider to output 40kHz. Fixes: cd4cb49dc5bb ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-8-maxime@cerno.tech (cherry picked from commit a9dd0b9a5c3e11c79e6ff9c7fdf07c471732dcb6) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Compute the CEC clock divider from the clock rateMaxime Ripard
The CEC clock divider needs to output a frequency of 40kHz from the HSM rate on the BCM2835. The driver used to have a fixed frequency for it, but that changed for the BCM2711 and we now need to compute it dynamically to maintain the proper rate. Fixes: cd4cb49dc5bb ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-7-maxime@cerno.tech (cherry picked from commit f1ceb9d10043683b89e5e5e5848fb4e855295762) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Restore cec physical address on reconnectDom Cobley
Currently we call cec_phys_addr_invalidate on a hotplug deassert. That may be due to a TV power cycling, or an AVR being switched on (and switching edid). This makes CEC unusable since our controller wouldn't have a physical address anymore. Set it back up again on the hotplug assert. Fixes: 15b4511a4af6 ("drm/vc4: add HDMI CEC support") Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-6-maxime@cerno.tech (cherry picked from commit b06eecb5158e5f3eb47b9d05aea8c259985cc5f7) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Fix up CEC registersDom Cobley
The commit 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction") forgot one CEC register, and made a copy and paste mistake for another one. Fix those mistakes. Fixes: 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-5-maxime@cerno.tech (cherry picked from commit 303085bc11bb7aebeeaaf09213f99fd7aa539a34) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Fix register offset with longer CEC messagesDom Cobley
The code prior to 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction") was relying on the fact that the register offset was incremented by 4 for each readl call. That worked since the register width is 4 bytes. However, since that commit the HDMI_READ macro is now taking an enum, and the offset doesn't increment by 4 but 1 now. Divide the index by 4 to fix this. Fixes: 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-4-maxime@cerno.tech (cherry picked from commit e9c9481f373eb7344f9e973eb28fc6e9d0f46485) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Move hdmi reset to bindDom Cobley
The hdmi reset got moved to a later point in the commit 9045e91a476b ("drm/vc4: hdmi: Add reset callback"). However, the reset now occurs after vc4_hdmi_cec_init and so tramples the setup of registers like HDMI_CEC_CNTRL_1 This only affects pi0-3 as on pi4 the cec registers are in a separate block Fixes: 9045e91a476b ("drm/vc4: hdmi: Add reset callback") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-3-maxime@cerno.tech (cherry picked from commit 7155334f15f360f5c98391c5c7e12af4c13395c4) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-02drm/vc4: hvs: Fix buffer overflow with the dlist handlingMaxime Ripard
Commit 0a038c1c29a7 ("drm/vc4: Move LBM creation out of vc4_plane_mode_set()") changed the LBM allocation logic from first allocating the LBM memory for the plane to running mode_set, adding a gap in the LBM, and then running the dlist allocation filling that gap. The gap was introduced by incrementing the dlist array index, but was never checking whether or not we were over the array length, leading eventually to memory corruptions if we ever crossed this limit. vc4_dlist_write had that logic though, and was reallocating a larger dlist array when reaching the end of the buffer. Let's share the logic between both functions. Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Eric Anholt <eric@anholt.net> Fixes: 0a038c1c29a7 ("drm/vc4: Move LBM creation out of vc4_plane_mode_set()") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129160647.128373-1-maxime@cerno.tech
2021-02-02drm/vc4: remove unneeded variable: "ret"Bernard Zhao
remove unneeded variable: "ret". Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210202122338.15351-1-bernard@vivo.com
2021-01-28drm/vc4: hdmi: Don't register the CEC adapter if there's no interruptsMaxime Ripard
We introduced the BCM2711 support to the vc4 HDMI controller with 5.10, but this was lacking any of the interrupts of the CEC controller so we have to deal with the backward compatibility. Do so by simply ignoring the CEC setup if the DT doesn't have the interrupts property. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-13-maxime@cerno.tech
2021-01-28drm/vc4: hdmi: Remove cec_available flagDom Cobley
Now that our HDMI controller supports CEC for the BCM2711, let's remove that flag. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-12-maxime@cerno.tech
generated by cgit (git 2.34.1) at 2025-07-19 14:38:38 +0000