Age | Commit message (Collapse) | Author |
|
Commit d40f275d96e8 ("drm/xe: Move survivability entirely to xe_pci")
tried to follow the logic: initialize everything needed and if
everything succeeds, set the flag that it's enabled. While it fixed some
corner cases of those calls failing, it was wrong for setting the flag
after the call to xe_heci_gsc_init(): that function does a different
initialization for survivability mode.
Fix that and add comments about this being done on purpose.
Suggested-by: Riana Tauro <riana.tauro@intel.com>
Fixes: d40f275d96e8 ("drm/xe: Move survivability entirely to xe_pci")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314-fix-survivability-v5-2-fdb3559ea965@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 14efa739ca70514e8b923a02b5bcb42511dd1ee8)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Commit d40f275d96e8 ("drm/xe: Move survivability entirely to xe_pci")
moved the survivability handling to be done entirely in the xe_pci
layer. However there are some issues with that approach:
1) Survivability mode needs at least the mmio initialized, otherwise it
can't really read a register to decide if it should enter that state
2) SR-IOV mode should be initialized, otherwise it's not possible to
check if it's VF
Besides, as pointed by Riana the check for
xe_survivability_mode_enable() was wrong in xe_pci_probe() since it's
not a bool return.
Fix that by moving the initialization to be entirely in the xe_device
layer, with the correct dependencies handled: only after mmio and sriov
initialization, and not triggering it on error from
wait_for_lmem_ready(). This restores the trigger behavior before that
commit. The xe_pci layer now only checks for "is it enabled?",
like it's doing in xe_pci_suspend()/xe_pci_remove(), etc.
Cc: Riana Tauro <riana.tauro@intel.com>
Fixes: d40f275d96e8 ("drm/xe: Move survivability entirely to xe_pci")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314-fix-survivability-v5-1-fdb3559ea965@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 86b5e0dbba07438de91dd81095464c6c4aa7a372)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The WA requires KMD to disable DOP clock gating during a semaphore
wait and also ensure that idle delay for every CS is lower than the
idle wait time in the PWRCTX_MAXCNT register. Default values for these
registers already comply with this restriction.
v2: Store timestamp_base in gt info and other comments (Daniele)
v3: Skip WA check for VF
v4: Review comments (Matt Roper)
v5: Cleanup the clock functions and use reg_field_get (Matt Roper)
v6: Fix checkpatch issue
v7: Fix CI issue
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250320175123.3026754-1-vinay.belgaumkar@intel.com
(cherry picked from commit 7c53ff050ba88bb37eed3e17f2bb8ec592d83302)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Starting from commit 18778b5fdd01 ("drm/xe: Eliminate usage of
TIMESTAMP_OVERRIDE") we access the CTC_MODE register only to warn
if it has undocumented value. There is no point in doing that on
the VF driver. While here, move this check to a helper function.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311114042.1954-2-michal.wajdeczko@intel.com
(cherry picked from commit fce3fb7b914bcd19341de8d8eff8bef371c2cddf)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
|
|
Enable per-function engine activity stats when VF's are enabled
and disable when VF's are disabled
v2: fix commit message
remove reset stats from pf config (Michal)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311071759.2117211-4-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Add PMU support for per-function engine activity stats.
per-function engine activity is enabled when VF's are enabled.
If 2 VF's are enabled, then the applicable function values are
0 - PF engine activity
1 - VF1 engine activity
2 - VF2 engine activity
This can be read from perf tool as shown below
./perf stat -e xe_<bdf>/engine-active-ticks,gt=0,engine_class=0,
engine_instance=0,function=1/ -I 1000
v2: fix documentation (Umesh)
remove global for functions (Lucas, Michal)
v3: fix commit message
move function_id checks to same place (Michal)
v4: fix comment (Umesh)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311071759.2117211-3-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Add support for function level engine activity stats.
Engine activity stats are enabled when VF's are enabled
v2: remove unnecessary initialization
move offset to improve code readability (Umesh)
remove global for function engine activity (Lucas)
v3: fix commit message (Michal)
v4: remove enable function parameter
fix kernel-doc (Umesh)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311071759.2117211-2-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
There are extra spaces in xe_vm_bind_ioctl_validate_bo(), remove those.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250320211519.632432-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
Some SKUs of Xe2_HPD platforms (such as BMG) have GDDR memory type
with ECC enabled. We need to identify this scenario and add a new
case in xelpdp_get_dram_info() to handle it. In addition, the
derating value needs to be adjusted accordingly to compensate for
the limited bandwidth.
Bspec: 64602
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 3adcf970dc7e ("drm/xe/bmg: Drop force_probe requirement")
Cc: stable@vger.kernel.org
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250324-tip-v2-1-38397de319f8@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Allow fault injection in a function used during initialization by
xe_hw_engine_class_sysfs_init() so that its error handling can be
tested.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314105050.636983-1-francois.dugast@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
WARNING: unmet direct dependencies detected for FB_IOMEM_HELPERS
Depends on [n]: HAS_IOMEM [=y] && FB_CORE [=n]
Selected by [m]:
- DRM_XE_DISPLAY [=y] && HAS_IOMEM [=y] && DRM [=m] && DRM_XE [=m] && DRM_XE [=m]=m [=m] && HAS_IOPORT [=y]
DRM_XE_DISPLAY requires FB_IOMEM_HELPERS, but the dependency FB_CORE is
missing, selecting FB_IOMEM_HELPERS if DRM_FBDEV_EMULATION is set as
other drm drivers.
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250323114103.1960511-1-yuehaibing@huawei.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Allow to test if driver behaves correctly when xe_pcode_probe_early()
fails. Note that this is not sufficient for testing survivability mode
as it's still required to read the hw to check for errors, which doesn't
happen on an injected failure.
To complete the early probe coverage, allow injection in the other
functions as well: xe_mmio_probe_early() and xe_device_probe_early().
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314-fix-survivability-v5-3-fdb3559ea965@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Commit d40f275d96e8 ("drm/xe: Move survivability entirely to xe_pci")
tried to follow the logic: initialize everything needed and if
everything succeeds, set the flag that it's enabled. While it fixed some
corner cases of those calls failing, it was wrong for setting the flag
after the call to xe_heci_gsc_init(): that function does a different
initialization for survivability mode.
Fix that and add comments about this being done on purpose.
Suggested-by: Riana Tauro <riana.tauro@intel.com>
Fixes: d40f275d96e8 ("drm/xe: Move survivability entirely to xe_pci")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314-fix-survivability-v5-2-fdb3559ea965@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Commit d40f275d96e8 ("drm/xe: Move survivability entirely to xe_pci")
moved the survivability handling to be done entirely in the xe_pci
layer. However there are some issues with that approach:
1) Survivability mode needs at least the mmio initialized, otherwise it
can't really read a register to decide if it should enter that state
2) SR-IOV mode should be initialized, otherwise it's not possible to
check if it's VF
Besides, as pointed by Riana the check for
xe_survivability_mode_enable() was wrong in xe_pci_probe() since it's
not a bool return.
Fix that by moving the initialization to be entirely in the xe_device
layer, with the correct dependencies handled: only after mmio and sriov
initialization, and not triggering it on error from
wait_for_lmem_ready(). This restores the trigger behavior before that
commit. The xe_pci layer now only checks for "is it enabled?",
like it's doing in xe_pci_suspend()/xe_pci_remove(), etc.
Cc: Riana Tauro <riana.tauro@intel.com>
Fixes: d40f275d96e8 ("drm/xe: Move survivability entirely to xe_pci")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314-fix-survivability-v5-1-fdb3559ea965@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The different GTs on a device can be very different. Right now for all
platforms the same firmware is loaded in each GT, however future
platforms may benefit from loading a different file depending on the GT
type.
Based on previous patch by John Harrison <John.C.Harrison@Intel.com>.
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307-xe-per-gt-fw-v1-2-459574d76400@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The `entries` variable is used to loop through the array - it's supposed
to be const, but not static.
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307-xe-per-gt-fw-v1-1-459574d76400@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Introduce and use a helper to iterate over the various pinned bo lists.
There are a couple of slight functional changes:
1) GGTT maps are now performed with the bo locked.
2) If the per-bo callback fails, keep the bo on the original list.
v2:
- Skip unrelated change in xe_bo.c
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250321133709.75327-1-thomas.hellstrom@linux.intel.com
|
|
Now that all display code has been converted to display specific runtime
PM interfaces, there's no need for the compat header anymore.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/037ed1f38c96715c76514e9eb7069b896ce06ba1.1742483007.git.jani.nikula@intel.com
|
|
Add display specific wrappers around the i915 and xe dedicated runtime
PM interfaces. There are no conversions here, just the wrappers.
Implement with_intel_display_rpm() without needing to provide a local
variable, which neatly narrows the scope and hides the type of the
wakeref cookie.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/086b312367fa0fbd8de92e9764117aa7ff4a8cc5.1742483007.git.jani.nikula@intel.com
|
|
Going forward, struct intel_display is the main display device data
pointer. Convert the external interfaces of intel_display_irq.[ch] to
struct intel_display.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/83b552154761d2790d8c774707e8d7612037bdf5.1742481923.git.jani.nikula@intel.com
|
|
Going forward, struct intel_display is the main display device data
pointer. Convert as much as possible of intel_hotplug.[ch] to struct
intel_display.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/cf382dbfacf1445b26fbe1e7c011e7a3ea6e1594.1742481923.git.jani.nikula@intel.com
|
|
The WA requires KMD to disable DOP clock gating during a semaphore
wait and also ensure that idle delay for every CS is lower than the
idle wait time in the PWRCTX_MAXCNT register. Default values for these
registers already comply with this restriction.
v2: Store timestamp_base in gt info and other comments (Daniele)
v3: Skip WA check for VF
v4: Review comments (Matt Roper)
v5: Cleanup the clock functions and use reg_field_get (Matt Roper)
v6: Fix checkpatch issue
v7: Fix CI issue
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250320175123.3026754-1-vinay.belgaumkar@intel.com
|
|
If devm_add_action_or_reset() isn't successful, xe_eu_stall_fini()
is invoked. So, unsuccessful return from devm_add_action_or_reset()
shouldn't dereference gt->eu_stall as xe_eu_stall_fini() already
frees it. Fix this issue.
Fixes: 9a0b11d4cf3b ("drm/xe/eustall: Add support to init, enable and disable EU stall sampling")
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eae49a414a7314921108e0388810aaee6261ad92.1741800396.git.harish.chegondi@intel.com
(cherry picked from commit 278469ff569e1082d56b4a7af26fbaecef9fbf3b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The `struct ttm_resource->placement` contains TTM_PL_FLAG_* flags, but
it was incorrectly tested for XE_PL_* flags.
This caused xe_dma_buf_pin() to always fail when invoked for
the second time. Fix this by checking the `mem_type` field instead.
Fixes: 7764222d54b7 ("drm/xe: Disallow pinning dma-bufs in VRAM")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: intel-xe@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218100353.2137964-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
(cherry picked from commit b96dabdba9b95f71ded50a1c094ee244408b2a8e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The `struct ttm_resource->placement` contains TTM_PL_FLAG_* flags, but
it was incorrectly tested for XE_PL_* flags.
This caused xe_dma_buf_pin() to always fail when invoked for
the second time. Fix this by checking the `mem_type` field instead.
Fixes: 7764222d54b7 ("drm/xe: Disallow pinning dma-bufs in VRAM")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: intel-xe@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218100353.2137964-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Backmerging to bring in the xe shrinker from drm-next.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Add hwmon support for fan1_input, fan2_input and fan3_input attributes,
which will expose fan speed of respective channels in RPM when supported
by hardware. With this in place we can monitor fan speed using lm-sensors
tool.
v2: Rely on platform checks instead of mailbox error (Aravind, Rodrigo)
v3: Introduce has_fan_control flag (Rodrigo)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250312085909.755073-1-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If devm_add_action_or_reset() isn't successful, xe_eu_stall_fini()
is invoked. So, unsuccessful return from devm_add_action_or_reset()
shouldn't dereference gt->eu_stall as xe_eu_stall_fini() already
frees it. Fix this issue.
Fixes: 9a0b11d4cf3b ("drm/xe/eustall: Add support to init, enable and disable EU stall sampling")
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eae49a414a7314921108e0388810aaee6261ad92.1741800396.git.harish.chegondi@intel.com
|
|
We already have internal interface for intel_bw.c converted to use
intel_display. Now convert the external interface as well.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311-xe3lpd-bandwidth-update-v5-2-a95a9d90ad71@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
Add a new entry in stats to for svm page faults. If CONFIG_DEBUG_FS is
enabled, the count can be viewed with per GT stat debugfs file.
This is similar to what is already in place for vma page faults.
Example output:
cat /sys/kernel/debug/dri/0/gt0/stats
svm_pagefault_count: 6
tlb_inval_count: 78
vma_pagefault_count: 0
vma_pagefault_kb: 0
v2: Fix build with CONFIG_DRM_GPUSVM disabled
v3: Update argument in kernel doc
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250312092749.164232-1-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
|
|
Plane->min_alignment returns an unsigned int so lets use that in the whole
relevant call chain.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307111402.26577-5-tvrtko.ursulin@igalia.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit c36e3442ea1c4c63f9876486dd9091487a77c5f2)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
This is more readable than the nameless booleans and will also come handy
later.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307111402.26577-4-tvrtko.ursulin@igalia.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 52a237e8d6c4abcda40c71268ee6cec75aa62799)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Emit_flush_invalidate() is incorrectly marking the write to LRC_PPHWSP as
a GGTT write and also writing an atypical ~0 dword as the payload. Fix it.
While at it drop the unused flags argument.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307111402.26577-3-tvrtko.ursulin@igalia.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 08ea901d0b8f6ea261d9936e03fa690540af0126)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
With only XE_FW_GT taken LNCF registers read back as all zeroes, leading
to a wild goose chase trying to figure out why is register programming
incorrect.
Fix it by grabbing XE_FORCEWAKE_ALL for affected platforms.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307111402.26577-2-tvrtko.ursulin@igalia.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 1182bc74b39ba3d124b544dab22d5672fae54b67)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
There's a mismatch on API: while xe_rtp_process_to_sr() processes
entries until an entry without name, the active tracking with
xe_rtp_process_ctx_enable_active_tracking() needs to use the number of
elements. The number of elements is taken everywhere using ARRAY_SIZE(),
but that will have one entry too many. This leads to the following
warning, as reported by lkp:
drivers/gpu/drm/xe/xe_tuning.c: In function 'xe_tuning_dump':
>> include/drm/drm_print.h:228:31: warning: '%s' directive argument is null [-Wformat-overflow=]
228 | drm_printf((printer), "%.*s" fmt, (indent), "\t\t\t\t\tX", ##__VA_ARGS__)
| ^~~~~~
drivers/gpu/drm/xe/xe_tuning.c:226:17: note: in expansion of macro 'drm_printf_indent'
226 | drm_printf_indent(p, 1, "%s\n", engine_tunings[idx].name);
| ^~~~~~~~~~~~~~~~~
That's because it will still process the last entry when tracking the
active tunings. The same issue exists in the WAs. Change
xe_rtp_process_to_sr() to also take the number of elements so the empty
entry can be removed and the warning should go away. Fixing on the
active-tracking side would more fragile as the it would need a `- 1`
everywhere and continue to use a different approach for number of
elements.
Aside from the warning, it's a non-issue as there would always be enough
bits allocated and the last entry would never be active since
xe_rtp_process_to_sr() stops on the sentinel.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503021906.P2MwAvyK-lkp@intel.com/
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306-fix-print-warning-v1-1-979c3dc03c0d@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 8aa8c2d4214e1771c32101d70740002662d31bb7)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
xe_guc_pc_start() was getting called from both
xe_uc_init_hw() and from xe_guc_start().
But both are called from do_gt_restart() and only
xe_uc_init_hw() is called at initialization.
So, let's remove the duplication in the regular gt_restart
path.
The only place where xe_guc_pc_start() won't get called now
is on the gt_reset failure path. However, if gt_reset has
failed, it is really unlikely that the PC start will work
or is desired.
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306220643.1014049-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit fc858ddf9c68696537cec530d2d48bf6ed06ea92)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
This register shouldn't be used by the VF drivers.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311114042.1954-3-michal.wajdeczko@intel.com
|
|
Starting from commit 18778b5fdd01 ("drm/xe: Eliminate usage of
TIMESTAMP_OVERRIDE") we access the CTC_MODE register only to warn
if it has undocumented value. There is no point in doing that on
the VF driver. While here, move this check to a helper function.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311114042.1954-2-michal.wajdeczko@intel.com
|
|
While we can only mimic read32 for a few GT registers for which
the PF shared the values, we shouldn't avoid calling helper code
if we try to access non-GT register, as then we miss to trigger
a debug warning. For cases where sriov_vf_gt was not set, just
use primary_gt instead.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311135726.1998-3-michal.wajdeczko@intel.com
|
|
Driver-FLR can't be triggered from the VF driver, so treat it
as disabled if VF. While around, fix also the message, as it
shouldn't be printed just 'once' as we may have many devices.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311135726.1998-2-michal.wajdeczko@intel.com
|
|
It will be easier to understand the meaning of the flr_timeout
value if the USEC_PER_SEC macro is used in the expression.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311140115.2042-1-michal.wajdeczko@intel.com
|
|
In commit 9632dfb0def4 ("drm/xe/vf: Don't run any save-restore
RTP actions if VF") we disabled processing of all RTP rules if
we were running as a VFs, since many of the RTP actions were
trying to access registers unaccessible for VFs.
This also included all of LRC WA rules, since some of them were
implemented in a way that required RMW pattern.
Now, as we can program LRC WAs without accessing such registers
from the driver, relying on the MI_MATH instruction instead, we
can unblock xe_rtp_process_to_sr() for VFs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311105221.1910-1-michal.wajdeczko@intel.com
|
|
Currently we are blocking processing of all save-restore rules
by the VFs inside the xe_rtp_process_to_sr() function, but we
want to unblock that to allow processing of the LRC WA rules.
To avoid hitting WARNs about reading an inaccessible registers by
the VFs, stop applying save-restore MMIOs action if VF, without
relying that SR list will be always empty for the VF.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303173522.1822-5-michal.wajdeczko@intel.com
|
|
To allow VFs properly handle LRC WAs, we should postpone doing
all RMW register operations and let them be run by the engine
itself, since attempt to perform read registers from within the
driver will fail on the VF. Use MI_MATH and ALU for that.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303173522.1822-4-michal.wajdeczko@intel.com
|
|
The command streamer implements an Arithmetic Logic Unit (ALU)
which supports basic arithmetic and logical operations on two
64-bit operands. Access to this ALU is thru the MI_MATH command
and sixteen General Purpose Register (GPR) 64-bit registers,
which are used as temporary storage.
Bspec: 45737, 60236 # MI
Bspec: 45525, 60132 # ALU
Bspec: 45533, 60309 # GPR
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304162307.1866-1-michal.wajdeczko@intel.com
|
|
The MI_LOAD_REGISTER_REG command reads value from a source register
location and writes that value to a destination register location.
Bspec: 45730, 60233
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303173522.1822-2-michal.wajdeczko@intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 feature pull #2 for v6.15:
Features and functionality:
- FBC dirty rectangle support for display version 30+ (Vinod)
- Update plane scalers via DSB based commits (Ville)
- Move runtime power status info to display power debugfs (Jani)
Refactoring and cleanups:
- Convert i915 and xe to DRM client setup (Thomas)
- Refactor and clean up CDCLK/bw/dbuf readout/sanitation (Ville)
- Conversions from drm_i915_private to struct intel_display (Jani, Suraj)
- Refactor display reset for better separation between display and core (Jani)
- Move panel fitter code together (Jani)
- Add mst and hdcp sub-structs to display structs for clarity (Jani)
- Header refactoring to clarify separation between display and i915 core (Jani)
Fixes:
- Fix DP MST max stream count to match number of pipes (Jani)
- Fix encoder HW state readout of DP MST UHBR (Imre)
- Fix ICL+ combo PHY cursor and coeff polarity programming (Ville)
- Fix pipeDMC and ATS fault handling (Ville)
- Display workarounds (Gustavo)
- Remove duplicate forward declaration (Vinod)
- Improve POWER_DOMAIN_*() macro type safety (Gustavo)
- Move CDCLK post plane programming later (Ville)
DRM core changes:
- Add client-hotplug helper (Thomas)
- Send pending hotplug events after client resume (Thomas)
- Add fb_restore and fb_set_suspend fb helper hooks (Thomas)
- Remove struct fb_probe fb helper hook (Thomas)
- Add const qualifier to drm_atomic_helper_damage_merged() (Vinod)
Xe driver changes:
- Convert i915 and xe to DRM client setup (Thomas)
- Refactor i915 compat headers (Jani)
- Fix fbdev GGTT mapping handling (Maarten)
- Figure out pxp instance from the gem object (Jani)
Merges:
- Backmerge drm-next to fix conflicts with drm-xe-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87o6y9gpub.fsf@intel.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Expose per-engine activity via perf pmu (Riana, Lucas, Umesh)
- Add support for EU stall sampling (Harish, Ashutosh)
- Allow userspace to provide low latency hint for submission (Tejas)
- GPU SVM and Xe SVM implementation (Matthew Brost)
Cross-subsystem Changes:
- devres handling for component drivers (Lucas)
- Backmege drm-next to allow cross dependent change with i915
- GPU SVM and Xe SVM implementation (Matthew Brost)
Core Changes:
Driver Changes:
- Fixes to userptr and missing validations (Matthew Auld, Thomas
Hellström, Matthew Brost)
- devcoredump typos and error handling improvement (Shuicheng)
- Allow oa_exponent value of 0 (Umesh)
- Finish moving device probe to devm (Lucas)
- Fix race between submission restart and scheduled being freed (Tejas)
- Fix counter overflows in gt_stats (Francois)
- Refactor and add missing workarounds and tunings for pre-Xe2 platforms
(Aradhya, Tvrtko)
- Fix PXP locks interaction with exec queues being killed (Daniele)
- Eliminate TIMESTAMP_OVERRIDE from xe (Matt Roper)
- Change xe_gen_wa_oob to allow building on MacOS (Daniel Gomez)
- New workarounds for Panther Lake (Tejas)
- Fix VF resume errors (Satyanarayana)
- Fix workaround infra skipping some workarounds dependent on engine
initialization (Tvrtko)
- Improve per-IP descriptors (Gustavo)
- Add more error injections to probe sequence (Francois)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ilc5jvtyaoyi6woyhght5a6sw5jcluiojjueorcyxbynrcpcjp@mw2mi6rd6a7l
|
|
The check for args->extensions is repeated twice in xe_vm_create_ioctl().
This commit removes the redundant check to streamline the code.
Fixes: 7224788f6756 ("drm/xe: Kill XE_VM_PROPERTY_BIND_OP_ERROR_CAPTURE_ADDRESS extension")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303004942.951699-1-x.wang@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8da8aecf1f2d89c2b8188bcf7aa252ec146ddd12)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|