summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2023-04-04drm/i915: Explain the magic numbers for AUX SYNC/precharge lengthVille Syrjälä
Replace the hardcoded final numbers in the AUX SYNC/precharge setup, and derive those from numbers from the (e)DP specs. The new functions can serve as the single point of truth for the number of SYNC pulses we use. Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230329172434.18744-2-ville.syrjala@linux.intel.com Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
2023-04-04drm/i915: Fix fast wake AUX sync lenVille Syrjälä
Fast wake should use 8 SYNC pulses for the preamble and 10-16 SYNC pulses for the precharge. Reduce our fast wake SYNC count to match the maximum value. We also use the maximum precharge length for normal AUX transactions. Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230329172434.18744-1-ville.syrjala@linux.intel.com Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
2023-04-03drm/i915/hwmon: Use 0 to designate disabled PL1 power limitAshutosh Dixit
On ATSM the PL1 limit is disabled at power up. The previous uapi assumed that the PL1 limit is always enabled and therefore did not have a notion of a disabled PL1 limit. This results in erroneous PL1 limit values when the PL1 limit is disabled. For example at power up, the disabled ATSM PL1 limit was previously shown as 0 which means a low PL1 limit whereas the limit being disabled actually implies a high effective PL1 limit value. To get round this problem, the PL1 limit uapi is expanded to include a special value 0 to designate a disabled PL1 limit. A read value of 0 means that the PL1 power limit is disabled, writing 0 disables the limit. The link between this patch and the bugs mentioned below is as follows: * Because on ATSM the PL1 power limit is disabled on power up and there were no means to enable it, we previously implemented the means to enable the limit when the PL1 hwmon entry (power1_max) was written to. * Now there is a IGT igt@i915_hwmon@hwmon_write which (a) reads orig value from all hwmon sysfs (b) does a bunch of random writes and finally (c) restores the orig value read. On ATSM since the orig value is 0, when the IGT restores the 0 value, the PL1 limit is now enabled with a value of 0. * PL1 limit of 0 implies a low PL1 limit which causes GPU freq to fall to 100 MHz. This causes GuC FW load and several IGT's to start timing out and gives rise to these Intel CI bugs. After this patch, writing 0 would disable the PL1 limit instead of enabling it, avoiding the freq drop issue. v2: Add explanation for bugs mentioned below (Rodrigo) v3: Eliminate race during PL1 disable and verify (Tvrtko) Change return to -ENODEV if verify fails (Tvrtko) Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8062 Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8060 Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230401024146.1826092-1-ashutosh.dixit@intel.com
2023-04-03drm/mediatek: dp: Change the aux retries times when receiving AUX_DEFERXinlei Lee
DP 1.4a Section 2.8.7.1.5.6.1: A DP Source device shall retry at least seven times upon receiving AUX_DEFER before giving up the AUX transaction. The drm_dp_i2c_do_msg() function in the drm_dp_helper.c file will judge the status of the msg->reply parameter passed to aux_transfer for different processing. Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver") Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/1680072203-10394-1-git-send-email-xinlei.lee@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2023-04-03drm/i915/i915_vma: Provide one missing param and demote another ↵Lee Jones
non-kerneldoc header Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/i915_vma.c:756: warning: Function parameter or member 'ww' not described in 'i915_vma_insert' drivers/gpu/drm/i915/i915_vma.c:1744: warning: Function parameter or member 'vma' not described in 'i915_vma_destroy_locked' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-17-lee@kernel.org
2023-04-03drm/i915/gt/uc/intel_guc_hwconfig: Demote a few non-conforming kerneldoc headersLee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.c:112: warning: Function parameter or member 'gt' not described in 'guc_hwconfig_init' drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.c:112: warning: expecting prototype for intel_guc_hwconfig_init(). Prototype was for guc_hwconfig_init() instead drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.c:145: warning: Function parameter or member 'gt' not described in 'intel_gt_init_hwconfig' drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.c:158: warning: Function parameter or member 'gt' not described in 'intel_gt_fini_hwconfig' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-16-lee@kernel.org
2023-04-03drm/i915/i915_gem: Provide function names to complete the expected kerneldoc ↵Lee Jones
format Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/i915_gem.c:447: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/gpu/drm/i915/i915_gem.c:536: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/gpu/drm/i915/i915_gem.c:726: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/gpu/drm/i915/i915_gem.c:811: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> [Jani: fix i915_gem_sw_finish_ioctl while applying] Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-15-lee@kernel.org
2023-04-03drm/i915/gem/i915_gem_object: Demote non-kerneldoc header with no param ↵Lee Jones
descriptions Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gem/i915_gem_object.c:887: warning: Function parameter or member 'obj' not described in 'i915_gem_object_has_unknown_state' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-14-lee@kernel.org
2023-04-03drm/i915/gem/i915_gem_wait: Provide function name to validate the kerneldoc ↵Lee Jones
header Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gem/i915_gem_wait.c:164: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-13-lee@kernel.org
2023-04-03drm/i915/gem/i915_gem_ttm_move: Provide a couple of missing descriptions for ↵Lee Jones
'num_pages' and 'ctx' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gem/i915_gem_ttm_move.c:272: warning: Function parameter or member 'num_pages' not described in 'i915_ttm_memcpy_arg' drivers/gpu/drm/i915/gem/i915_gem_ttm_move.c:569: warning: Function parameter or member 'ctx' not described in 'i915_ttm_move' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-12-lee@kernel.org
2023-04-03drm/i915/gem/i915_gem_ttm: Demote half-filled kerneldocLee Jones
Hopefully someone knowledgable will follow-up to complete it. Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1292: warning: Function parameter or member 'offset' not described in '__i915_gem_ttm_object_init' drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1292: warning: Function parameter or member 'page_size' not described in '__i915_gem_ttm_object_init' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-11-lee@kernel.org
2023-04-03drm/i915/gem/i915_gem_ttm_pm: Provide a couple of missing descriptions for ↵Lee Jones
'flags' and remove some superfluous ones Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:156: warning: Function parameter or member 'flags' not described in 'i915_ttm_backup_region' drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:156: warning: Excess function parameter 'allow_gpu' description in 'i915_ttm_backup_region' drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:156: warning: Excess function parameter 'backup_pinned' description in 'i915_ttm_backup_region' drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:223: warning: Function parameter or member 'flags' not described in 'i915_ttm_restore_region' drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:223: warning: Excess function parameter 'allow_gpu' description in 'i915_ttm_restore_region' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-10-lee@kernel.org
2023-04-03drm/i915/gem/i915_gem_domain: Provide function names to complete proper ↵Lee Jones
kerneldoc Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gem/i915_gem_domain.c:119: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/gpu/drm/i915/gem/i915_gem_domain.c:180: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/gpu/drm/i915/gem/i915_gem_domain.c:265: warning: expecting prototype for Changes the cache(). Prototype was for i915_gem_object_set_cache_level() instead drivers/gpu/drm/i915/gem/i915_gem_domain.c:470: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/gpu/drm/i915/gem/i915_gem_domain.c:514: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-9-lee@kernel.org
2023-04-03drm/i915/gem/i915_gem_create: Provide the function names for proper ↵Lee Jones
kerneldoc headers Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gem/i915_gem_create.c:147: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/gpu/drm/i915/gem/i915_gem_create.c:218: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/gpu/drm/i915/gem/i915_gem_create.c:402: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Matthew Auld <matthew.auld@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> [Jani: fixed i915_gem_create_ext_ioctl while applying] Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-8-lee@kernel.org
2023-04-03drm/i915/gt/intel_rps: Demote a kerneldoc abuse for ips_ping_for_i915_load()Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gt/intel_rps.c:2646: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-7-lee@kernel.org
2023-04-03drm/i915/intel_region_ttm: Provide missing description for 'offset' paramLee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/intel_region_ttm.c:201: warning: Function parameter or member 'offset' not described in 'intel_region_ttm_resource_alloc' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-3-lee@kernel.org
2023-04-03drm/i915/i915_scatterlist: Fix kerneldoc formatting issue - missing '@'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/i915_scatterlist.c:62: warning: Function parameter or member 'size' not described in 'i915_refct_sgt_init' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-2-lee@kernel.org
2023-04-03drm/msm/adreno: adreno_gpu: Use suspend() instead of idle() on load errorKonrad Dybcio
The adreno_load_gpu() path is guarded by an error check on adreno_load_fw(). This function is responsible for loading Qualcomm-only-signed binaries (e.g. SQE and GMU FW for A6XX), but it does not take the vendor-signed ZAP blob into account. By embedding the SQE (and GMU, if necessary) firmware into the initrd/kernel, we can trigger and unfortunate path that would not bail out early and proceed with gpu->hw_init(). That will fail, as the ZAP loader path will not find the firmware and return back to adreno_load_gpu(). This error path involves pm_runtime_put_sync() which then calls idle() instead of suspend(). This is suboptimal, as it means that we're not going through the clean shutdown sequence. With at least A619_holi, this makes the GPU not wake up until it goes through at least one more start-fail-stop cycle. The pm_runtime_put_sync that appears in the error path actually does not guarantee that because of the earlier enabling of runtime autosuspend. Fix that by using pm_runtime_put_sync_suspend to force a clean shutdown. Test cases: 1. All firmware baked into kernel 2. error loading ZAP fw in initrd -> load from rootfs at DE start Both succeed on A619_holi (SM6375) and A630 (SDM845). Fixes: 0d997f95b70f ("drm/msm/adreno: fix runtime PM imbalance at gpu load") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/530001/ Link: https://lore.kernel.org/r/20230330231517.2747024-1-konrad.dybcio@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-04-03drm/msm/adreno: adreno_gpu: Don't set OPP scaling clock w/ GMUKonrad Dybcio
Recently I contributed the switch to OPP API for all Adreno generations. I did however also skip over the fact that GPUs with a GMU don't specify a core clock of any kind in the GPU node. While that didn't break anything, it did introduce unwanted spam in the dmesg: adreno 5000000.gpu: error -ENOENT: _opp_set_clknames: Couldn't find clock with name: core_clk Guard the entire logic so that it's not used with GMU-equipped GPUs. Fixes: 9f251f934012 ("drm/msm/adreno: Use OPP for every GPU generation") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/530347/ Link: https://lore.kernel.org/r/20230223-topic-gmuwrapper-v6-1-2034115bb60c@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-04-03drm/bridge: tc358767: Enable DSI burst mode, LPM, non-continuous clockMarek Vasut
The TC358767/TC358867/TC9595 are capable of DSI burst mode, which is more energy efficient than the non-burst modes. Make use of it. The TC358767/TC358867/TC9595 are capable of DSI non-continuous clock, since it sources the internal PLL clock from external clock source. The DSI non-continuous clock further reduces power utilization. The TC358767/TC358867/TC9595 may use DSI LPM for command transmissions, make sure this is configured correctly in the DSI mode flags. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221016003632.406468-1-marex@denx.de
2023-04-03drm/i915/display/intel_wm: Fix a little doc-rot in intel_update_watermarks()Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/display/intel_wm.c:46: warning: Function parameter or member 'i915' not described in 'intel_update_watermarks' drivers/gpu/drm/i915/display/intel_wm.c:46: warning: Excess function parameter 'dev_priv' description in 'intel_update_watermarks' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-20-lee@kernel.org
2023-04-03drm/i915/display/intel_display_power: Fix incorrectly documented function ↵Lee Jones
__intel_display_power_put_async() Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/display/intel_display_power.c:712: warning: expecting prototype for intel_display_power_put_async(). Prototype was for __intel_display_power_put_async() instead Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Imre Deak <imre.deak@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-18-lee@kernel.org
2023-04-03drm/i915/display/intel_display_debugfs: Fix incorrect param naming for ↵Lee Jones
'intel_connector' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/display/intel_display_debugfs.c:1668: warning: Function parameter or member 'intel_connector' not described in 'intel_connector_debugfs_add' drivers/gpu/drm/i915/display/intel_display_debugfs.c:1668: warning: Excess function parameter 'connector' description in 'intel_connector_debugfs_add' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-5-lee@kernel.org
2023-04-03drm/prime: reject DMA-BUF attach when get_sg_table is missingSimon Ser
drm_gem_map_dma_buf() requires drm_gem_object_funcs.get_sg_table to be implemented, or else WARNs. Allow drivers to leave this hook unimplemented to implement purely local DMA-BUFs (ie, DMA-BUFs which cannot be imported anywhere else but the device which allocated them). In that case, reject imports to other devices in drm_gem_map_attach(). v2: new patch v3: use ENOSYS Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Hans de Goede <hdegoede@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230302143502.500661-1-contact@emersion.fr
2023-04-03drm/bridge: lt8912b: Fix DSI Video ModeFrancesco Dolcini
LT8912 DSI port supports only Non-Burst mode video operation with Sync Events and continuous clock on clock lane, correct dsi mode flags according to that removing MIPI_DSI_MODE_VIDEO_BURST flag. Cc: <stable@vger.kernel.org> Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230330093131.424828-1-francesco@dolcini.it
2023-04-03drm/i915: Fix context runtime accountingTvrtko Ursulin
When considering whether to mark one context as stopped and another as started we need to look at whether the previous and new _contexts_ are different and not just requests. Otherwise the software tracked context start time was incorrectly updated to the most recent lite-restore time- stamp, which was in some cases resulting in active time going backward, until the context switch (typically the heartbeat pulse) would synchronise with the hardware tracked context runtime. Easiest use case to observe this behaviour was with a full screen clients with close to 100% engine load. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: bb6287cb1886 ("drm/i915: Track context current active time") Cc: <stable@vger.kernel.org> # v5.19+ Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320151423.1708436-1-tvrtko.ursulin@linux.intel.com [tursulin: Fix spelling in commit msg.] (cherry picked from commit b3e70051879c665acdd3a1ab50d0ed58d6a8001f) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-04-03drm/i915: fix race condition UAF in i915_perf_add_config_ioctlMin Li
Userspace can guess the id value and try to race oa_config object creation with config remove, resulting in a use-after-free if we dereference the object after unlocking the metrics_lock. For that reason, unlocking the metrics_lock must be done after we are done dereferencing the object. Signed-off-by: Min Li <lm0963hack@gmail.com> Fixes: f89823c21224 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface") Cc: <stable@vger.kernel.org> # v4.14+ Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230328093627.5067-1-lm0963hack@gmail.com [tursulin: Manually added stable tag.] (cherry picked from commit 49f6f6483b652108bcb73accd0204a464b922395) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-04-03drm/i915: Use compressed bpp when calculating m/n value for DP MST DSCStanislav Lisovskiy
For obvious reasons, we use compressed bpp instead of pipe bpp for DSC DP SST case. Lets be consistent and use compressed bpp instead of pipe bpp, also in DP MST DSC case. Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path") Link: https://patchwork.freedesktop.org/patch/msgid/20230327064217.24033-1-stanislav.lisovskiy@intel.com (cherry picked from commit ea1deabc6f11575eb3375b454457eaa3c9837abc) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-04-03drm/i915/huc: Cancel HuC delayed load timer on reset.Daniele Ceraolo Spurio
In the rare case where we do a full GT reset after starting the HuC load and before it completes (which basically boils down to i915 hanging during init), we need to cancel the delayed load fence, as it will be re-initialized in the post-reset recovery. Fixes: 27536e03271d ("drm/i915/huc: track delayed HuC load with a fence") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230313205556.1174503-1-daniele.ceraolospurio@intel.com (cherry picked from commit cdf7911f7dbcb37228409a63bf75630776c45a15) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-04-03drm/i915/ttm: fix sparse warningMatthew Auld
Sparse complains with: drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1066:21: sparse: expected restricted vm_fault_t [assigned] [usertype] ret drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1066:21: sparse: got int Fixes: 516198d317d8 ("drm/i915: audit bo->resource usage v3") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130101230.25347-1-matthew.auld@intel.com Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Acked-by: Christian König <ckoenig.leichtzumerken@gmail.com> Signed-off-by: Christian König <christian.koenig@amd.com> (cherry picked from commit fde789e8339c60c8c58e5a71fa819fcfe52d839e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-04-03drm/i915: Remove the encoder update_prepare()/complete() hooksImre Deak
The encoder update_prepare()/complete() hooks were added to hold a TC port link reference for all outputs in the atomic state around the whole modeset enable sequence - thus locking the ports' TC mode - and set the TBT/DP-alt PLL type corresponding to the current TC mode. Since nothing depends on the PLL selection before/after then encoder's pre_pll_enable/post_pll_disable hooks are called, the above steps can be moved to these hooks, so do that and remove the update_prepare()/complete() hooks. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-30-imre.deak@intel.com
2023-04-03drm/i915: Remove TC PHY disconnect workaroundImre Deak
After the previous patch the workaround for a TC PHY hang issue is not required any more, remove it. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-29-imre.deak@intel.com
2023-04-03drm/i915: Disable DPLLs before disconnecting the TC PHYImre Deak
Bspec requires disabling the DPLLs on TC ports before disconnecting the port's PHY. Add a post_pll_disable encoder hook and move the call to disconnect the port's PHY from the post_disable hook to the new hook. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-28-imre.deak@intel.com
2023-04-03drm/i915: Move shared DPLL disabling into CRTC disable hookImre Deak
The spec requires disabling the PLL on TC ports before disconnecting the port's PHY. Prepare for that by moving the PLL disabling to the CRTC disable hook, while disconnecting the PHY will be moved to the post_pll_disable() encoder hook in the next patch. v2: Move the call from intel_crtc_disable_noatomic() as well. Reviewed-by: Mika Kahola <mika.kahola@intel.com> # v1 Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-27-imre.deak@intel.com
2023-04-03drm/i915/adlp/tc: Align the connect/disconnect PHY sequence with bspecImre Deak
Bspec has updated the TC connect/disconnect sequences, add the required platform hooks for these. The difference wrt. the old sequence is the order of taking the PHY ownership - while holding a port power reference this requires - and blocking the TC-cold power state. Bspec: 49294 Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-26-imre.deak@intel.com
2023-04-03drm/i915/tc: Don't connect the PHY in intel_tc_port_connected()Imre Deak
Connecting the PHY for connector probing - also blocking TC-cold - isn't required and has some overhead. Taking only the mutex is sufficient, so do that. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-25-imre.deak@intel.com
2023-04-03drm/i915/tc: Get power ref for reading the HPD live status registerImre Deak
Enable the power required for the HPD live status register access instead of depending on the caller blocking the TC-cold power state (during HW readout and connector probing). A follow up patch will remove connecting/disconnecting the PHY around connector probing, so querying the HPD status can happen in this case without TC-cold being blocked. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-24-imre.deak@intel.com
2023-04-03drm/i915/adlp/tc: Use the DE HPD ISR register for hotplug detectionImre Deak
The spec says to use the CPU ISR registers for DP-alt/TBT HPD detection on ADLP, so do that instead of using the related IOM/TCSS registers. Bspec: 55480, 55482, 49212, 49305 Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-23-imre.deak@intel.com
2023-04-03drm/i915/tc: Add TC PHY hook to init the PHYImre Deak
Add a hook for platform specific PHY initialization. Move the detection of modular FIAs to the TGL handler, skipping this on ADLP+ where the FIAs are always modular, not requiring a detection. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-22-imre.deak@intel.com
2023-04-03drm/i915/tc: Add asserts in TC PHY hooks that the required power is onImre Deak
Add an assert to each TC PHY hook that their required power domain is enabled. While at it add a comment describing the domains used on each platform and TC mode. v2: Fix non kernel-doc multiline comments. (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-21-imre.deak@intel.com
2023-04-03drm/i915/tc: Add TC PHY hook to get the TC-cold blocking power domainImre Deak
Instead of the corresponding if ladder, add a TC PHY hook to get the platform and TC mode specific power domain used for blocking the TC-cold power state. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-20-imre.deak@intel.com
2023-04-03drm/i915/tc: Drop tc_cold_block()/unblock()'s power domain parameterImre Deak
Simplify tc_cold_block()/unblock() by dropping their power domain parameter. The power domain depends on the current TC mode, which - after the previous patch - can't change while the PHY is connected, holding a TC-cold-off power domain reference. Based on this the domain can be deducted from the current TC mode instead of having to pass this as a parameter. Blocking TC-cold for the PHY HW readout happens before the current TC mode is determined, so here the initial power domain must be still manually passed. For debugging still keep track of the domain used for tc_cold_block() and verify that it remained the same until tc_cold_unblock(). While at it rename tc_cold_get_power_domain() to tc_phy_cold_off_domain(), reflecting the name of platform specific hook added in the next patch. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-19-imre.deak@intel.com
2023-04-03drm/i915/tc: Remove redundant wakeref=0 check from unblock_tc_cold()Imre Deak
After the previous patch unblock_tc_cold() will not be called in a disconnected mode, so the wakeref passed to it will be always non-zero. Remove the redundant check. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-18-imre.deak@intel.com
2023-04-03drm/i915/tc: Block/unblock TC-cold in the PHY connect/disconnect hooksImre Deak
Move blocking/unblocking the TC-cold power state to the platform specific PHY connect / disconnect hooks. This allows for adjusting the connect/disconnect sequence as required for each platform. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-17-imre.deak@intel.com
2023-04-03drm/i915/tc: Check TC mode instead of the VBT legacy flagImre Deak
After the previous patch the TC mode in the connect/disconnect functions is always in sync with the VBT legacy port flag, so for consistency with the rest of the function check the TC mode instead of the VBT flag. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-16-imre.deak@intel.com
2023-04-03drm/i915/tc: Fix up the legacy VBT flag only in disconnected modeImre Deak
A follow-up patch simplifies the tc_cold_block()/unblock() functions, dropping the power domain parameter. For this it must be ensured that the power domain - which depends on the actual TC mode and so the VBT legacy port flag - can't change while the PHY is in a connected state and accordingly TC-cold is blocked. Make this so, by fixing up the VBT legacy flag only in the disconnected TC mode, instead of whenever the HPD state is retrieved. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-15-imre.deak@intel.com
2023-04-03drm/i915/tc: Add TC PHY hooks to connect/disconnect the PHYImre Deak
Add TC PHY hooks to connect/disconnect the PHY. A follow-up patch will add the ADLP specific hooks for these. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-14-imre.deak@intel.com
2023-04-03drm/i915/tc: Factor out tc_phy_verify_legacy_or_dp_alt_mode()Imre Deak
Factor out a function verifying the PHY connected state in legacy or DP-alt mode. This is common to all platforms, which can be reused in platform specific connect hooks added in follow-up patches. No functional changes. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-13-imre.deak@intel.com
2023-04-03drm/i915/tc: Add generic TC PHY connect/disconnect handlersImre Deak
Add generic handlers to connect/disconnect a PHY. Setting the TC mode to the target mode deducted from the HPD state and - if connecting to this mode fails - falling back to connecting to the default (TBT) mode are common to all platforms; move the logic for this from the ICL specific connect / disconnect handlers to the generic ones. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-12-imre.deak@intel.com
2023-04-03drm/i915/tc: Add TC PHY hook to read out the PHY HW stateImre Deak
Add a TC PHY hook to read out the PHY HW state on each platform, move the common parts to the generic helper. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-11-imre.deak@intel.com
generated by cgit (git 2.34.1) at 2025-07-19 06:55:13 +0000