| Age | Commit message (Collapse) | Author |
|---|
|
Enable host limit metrics support for smuv_13_0_12
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We need to take a reference to the interrupts to make
sure they stay enabled even if the kernel queues have
disabled them.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We need to take a reference to the interrupts to make
sure they stay enabled even if the kernel queues have
disabled them.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable host limit metrics support for smuv_13_0_6
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable doorbell for JPEG5_0_1 and adjust index for VCN5_0_1.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Increase vcn doorbell range for gfx950 to 11.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Regardless of whether we disable kernel queues, we need
to take an extra reference to the pipe interrupts for
user queues to make sure they stay enabled in case we
disable them for kernel queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Regardless of whether we disable kernel queues, we need
to take an extra reference to the pipe interrupts for
user queues to make sure they stay enabled in case we
disable them for kernel queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
rocm-smi with superuser permission doesn't show some
of smi events, i.e. page fault/migration, because the
condition of "(events & all)" is false. Superuser
should be able to detect all events, the condiiton of
"(events & all)" seems redundant, so removing it will
fix the issue.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Missing DCE 6.0 6.1 and 6.4 are identified as UNKNOWN. Fix this.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Probably a cut and paste error from using get_integrated_info_v8's comment.
This has to be get_integrated_info_v9
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
i2c_speed_in_khz was set twice with the same values. Looking at other DCE
versions, we probably wanted to set the value for i2c_speed_in_khz_hdcp.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
"aligned" not "aligend"
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
"aligned" not "aligend"
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
While not needed per speaking, all the other parameters have names but
this one.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The prefix dce110 is used on all functions, but init_pipes() and
init_hw(). Under DCN, these sames functions are prefixed.
Let's keep thing coherent.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1) Checkpatch complains if we print an error message for kzalloc()
failure. The kzalloc() failure already has it's own error messages
built in. Also this allocation is small enough that it is guaranteed
to succeed.
2) Return directly instead of doing a goto free_fence_drv. The
"fence_drv" is already NULL so no cleanup is necessary.
Reviewed-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The goto frees "fence_drv" so this is a double free bug. There is no
need to call amdgpu_seq64_free(adev, fence_drv->va) since the seq64
allocation failed so change the goto to goto free_fence_drv. Also
propagate the error code from amdgpu_seq64_alloc() instead of hard coding
it to -ENOMEM.
Fixes: e7cf21fbb277 ("drm/amdgpu: Few optimization and fixes for userq fence driver")
Reviewed-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull it out of the MES code and into the generic code.
It's not MES specific and needs to be applied to all user
queues regardless of the backend.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The mistake will lead to NULL kernel oops, so fix it.
Fixes: 4172b556fd5b ("drm/amdkfd: add smi events for process start and end")
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Register stop/start/soft_reset queue functions for sdma v4_4_2.
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch introduces new function pointers in the amdgpu_sdma structure
to handle queue stop, start and soft reset operations. These will replace
the older callback mechanism.
The new functions are:
- stop_kernel_queue: Stops a specific SDMA queue
- start_kernel_queue: Starts/Restores a specific SDMA queue
- soft_reset_kernel_queue: Performs soft reset on a specific SDMA queue
v2: Update stop_queue/start_queue function paramters to use ring pointer instead of device/instance(Chritian)
v3: move stop_queue/start_queue to struct amdgpu_sdma_instance and rename them. (Alex)
v4: rework the ordering a bit (Alex)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
since we loop through the queues |= the errors.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Unmap user queues on suspend and map them on resume.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add helpers to unmap and map user queues on suspend and
resume.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If userq creation fails, we need to properly unwind and free the
user queue fence driver.
v2: free idr as well (Sunil)
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move some userq fence handling code into amdgpu_userq_fence.c.
This matches the other code in that file.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Split out the queue map from the mqd create call and split
out the queue unmap from the mqd destroy call. This splits
the queue setup and teardown with the actual enablement
in the firmware.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rename to map and umap to better align with what is happening
at the firmware level and remove the extra level of indirection
in the MES userq code.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is unused so remove it.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Due to lack of a proper format specifier, %p4cc was being used instead
of %p4cl for the purpose of printing FourCCs. But the disadvange was
that they were being printed in a reverse order. %p4cl should correct
this issue.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/PN3PR01MB959783DC6377C4CAB203D7ADB8B52@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
In preparation for moving the common bits of this driver, merge the
contents of mtk_hdmi_output_init in mtk_hdmi_register_audio_driver
function to aggregate all of the initial audio setup together in
the same function and to make it clear that all of the setup that
is performed in mtk_hdmi_output_init is specifically related only
to audio and not video.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-15-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Move the CEC device parsing logic to a new function called
mtk_hdmi_get_cec_dev(), and move the parsing action to the end
of mtk_hdmi_dt_parse_pdata(), allowing to remove gotos in this
function, reducing code size and improving readability.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-14-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Change error prints to use dev_err_probe() instead of dev_err()
where possible in function mtk_hdmi_dt_parse_pdata(), used only
during device probe.
While at it, also beautify some prints.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-13-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In preparation for splitting common bits of this driver, moving
the hdmi_rec_n_table struct array, and the hdmi_recommended_n(),
hdmi_mode_clock_to_hz(), hdmi_expected_cts() functions, add one
function called mtk_hdmi_get_ncts() that sets both N and CTS in
a single call.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-12-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In preparation for splitting common bits of this driver, move the
mutex-protected cable plugged callback and codec device setting
to a new function called mtk_hdmi_audio_set_plugged_cb().
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-11-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In preparation for splitting common bits of this driver, move the
audio params (codec, sample rate/size, input type, i2s format, etc)
selection to a new function called mtk_hdmi_audio_params().
While at it, also rename "hdmi_params" to "aud_params" both to match
the mtk_hdmi struct member name and to clarify that those parameters
are for HDMI Audio and not for HDMI Video configuration.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-10-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
As a cleanup, and in preparation for splitting common bits of this
driver, disgregate the code in function mtk_hdmi_audio_set_param()
to the beginning and end of function mtk_hdmi_audio_hw_params().
In a later commit, the hw_params callback function will also be
disgregated so that the code will get two functions: one that
performs the generic hdmi_audio_param copy, and one that performs
IP specific setup, both of which will be called in the callback,
allowing all of the non IP version specific code to get moved in
a common file.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-9-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In preparation for the addition of a new version of the HDMI IP
which will need to share its iospace between multiple subdrivers,
and in preparation for moving out the common bits between the two,
migrate this driver to fully use regmap.
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-8-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Now that all of the mtk_hdmi subdrivers are a platform driver on
their own it is possible to remove the custom init/exit functions
in this driver and just use the module_platform_driver() macro.
While at it, also compress struct of_device_id entries and remove
stray commas in mtk_hdmi_driver assignments.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-7-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In preparation for adding a driver for the new HDMIv2 IP, and
before splitting out the common bits from the HDMI driver,
change the mtk_hdmi_ddc driver from being registered from the
HDMI driver itself to be a module_platform_driver of its own.
With this change, there are no more users of the mtk_hdmi.h header
so, while at it, also remove it.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-6-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
RK3588 integrates the Analogix eDP 1.3 TX controller IP and the HDMI/eDP
TX Combo PHY based on a Samsung IP block. There are also two independent
eDP display interface with different address on RK3588 Soc.
The patch currently adds only the basic support, specifically RGB output
up to 4K@60Hz, without the tests for audio, PSR and other eDP 1.3 specific
features.
In additon, the above Analogix IP has always been utilized as eDP on
Rockchip platform, despite its capability to also support the DP v1.2.
Therefore, the newly added logs will contain the term 'edp' rather than
'dp'. And the newly added 'apb' reset control is to ensure the APB bus
of eDP controller works well on the RK3588 SoC.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-12-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Expand enum analogix_dp_devtype with RK3588_EDP, and add max_link_rate
and max_lane_count configs for it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-11-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Move drm_of_find_panel_or_bridge() a little later and combine it with
component_add() into a new function rockchip_dp_link_panel(). The function
will serve as done_probing() callback of devm_of_dp_aux_populate_bus(),
aiding to support for obtaining the eDP panel via the DP AUX bus.
If failed to get the panel from the DP AUX bus, it will then try the other
way to get panel information through the platform bus.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250310104114.2608063-9-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add analogix_dpaux_wait_hpd_asserted() to help confirm the HPD state
before doing AUX transfers.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250310104114.2608063-8-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The main modification is moving the DP AUX initialization from function
analogix_dp_bind() to analogix_dp_probe(). In order to get the EDID of
eDP panel during probing, it is also needed to advance PM operations to
ensure that eDP controller and phy are prepared for AUX transmission.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250310104114.2608063-7-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
&analogix_dp_device.aux
Add two new functions: one to find &analogix_dp_device.plat_data via
&drm_dp_aux, and the other to get &analogix_dp_device.aux. Both of them
serve for the function of getting panel from DP AUX bus, which is why
they are included in a single commit.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-6-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add support to configurate link rate, lane count, voltage swing and
pre-emphasis with phy_configure(). It is helpful in application scenarios
where analogix controller is mixed with the phy of other vendors.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-4-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
analogix_dp_bind()/analogix_dp_unbind()
Remove the check related to CONFIG_PM in order to make the code more
concise, as the CONFIG_PM should be a required option for many drivers.
In addition, it is preferable to use devm_pm_runtime_enable() instead of
manually invoking pm_runtime_enable() followed by pm_runtime_disable().
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-3-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
disable_irq()
The IRQF_NO_AUTOEN can be used for the drivers that don't want
interrupts to be enabled automatically via devm_request_threaded_irq().
Using this flag can provide be more robust compared to the way of
calling disable_irq() after devm_request_threaded_irq() without the
IRQF_NO_AUTOEN flag.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-2-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
