summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)Author
2023-08-21hwmon: (pmbus/mp2975) Make phase count variablePatrick Rudolph
In order to add support for MP2973 and MP2971 replace hardcoded phase count for both channels by a variable. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Link: https://lore.kernel.org/r/20230714135124.2645339-5-Naresh.Solanki@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: (pmbus/mp2975) Simplify VOUT codePatrick Rudolph
In order to upstream MP2973/MP2971 simplify the code by removing support for various VOUT formats. The MP2973 and MP2971 supports all PMBUS supported formats for VOUT, while the MP2975 only support DIRECT and VID for VOUT. In DIRECT mode all chips report the voltage in 1mV/LSB. Configure the chip to use DIRECT format for VOUT and drop the code conversion code for other formats. The to be added chips MP2973/MP2971 will be configured to also report VOUT in DIRECT format. The maximum voltage that can be reported in DIRECT format is 32768mV. This is sufficient as the maximum output voltage for VR12/VR13 is 3040 mV. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Link: https://lore.kernel.org/r/20230714135124.2645339-4-Naresh.Solanki@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: (pmbus/mp2975) Prepare for MP2973 and MP2971Patrick Rudolph
Add support for differntiating between the chips. The following commits will make use of this mechanism. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Link: https://lore.kernel.org/r/20230714135124.2645339-3-Naresh.Solanki@9elements.com [groeck: double-cast of_device_get_match_data() to make gcc happy] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: (pmbus/mp2975) Fix whitespace errorPatrick Rudolph
Fix whitespace error reported by checkpatch.pl Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Link: https://lore.kernel.org/r/20230714135124.2645339-1-Naresh.Solanki@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: (it87) Add support to detect sensor type AMDTSIFrank Crawford
Add test for sensor type AMDTSI which is available on certain recent chipsets. Signed-off-by: Frank Crawford <frank@crawford.emu.id.au> Link: https://lore.kernel.org/r/20230707123005.956415-4-frank@crawford.emu.id.au Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: (it87) Improve temperature reporting supportFrank Crawford
Add test if thermistor sensor type attribute should be visible, i.e. test if the attribute is defined. Signed-off-by: Frank Crawford <frank@crawford.emu.id.au> Link: https://lore.kernel.org/r/20230707123005.956415-3-frank@crawford.emu.id.au [groeck: Dropped unnecessary 'type' variable in it87_temp_is_visible()] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: (it87) Split temperature sensor detection to separate functionFrank Crawford
The temperature sensor type will need to be used in multiple places, so split it out into its own function. Signed-off-by: Frank Crawford <frank@crawford.emu.id.au> Link: https://lore.kernel.org/r/20230707123005.956415-2-frank@crawford.emu.id.au [groeck: Dropped unnecessary 'type' variable in show_temp_type()] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: (oxp-sensors) Move board detection to the init functionJoaquín Ignacio Aramendía
Move detection logic to the start of init() function so we won't instantiate the driver if the board is not compatible. Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20230717222526.229984-3-samsagax@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: (nct6775) Increase and reorder ALARM/BEEP bitsAhmad Khalifa
* Increase available bits, IN: 16 to 24, FAN: 8 to 12, TEMP: 6 to 12 * Reorder alarm/beep definitions to match in order to allow additional inputs in the future * Remove comments about 'unused' bits as probe() is a better reference Testing note: * Tested on nct6799 with IN/FAN/TEMP, and changing min/max/high/hyst, that triggers the corresponding alarms correctly. Good confirmation on the original mapping of the registers and masks. As to be expected, only 4 fans and 2 temps (fixed) have limits currently on nct6799 on my board. * Trouble with testing intrusion alarms and beeps, no way to confirm those. As I understand now, intrusion/caseopen is probably not connected on my board. And I haven't seen a buzzer on a board in ages. Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws> Link: https://lore.kernel.org/r/20230717201050.1657809-1-ahmad@khalifa.ws Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: Remove smm665 driverGuenter Roeck
SMM665 and related chips are power controller/sequencer chips from Summit Microelectronics. The company was acquired by Qualcomm in 2012, and support for the chip series stopped. The chips are long since gone from active use, making the driver unsupportable and just consuming space and compile time. Remove it. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: (nct6775) Change labels for nct6799Ahmad Khalifa
nct6799d-r and nct6796d-s are very similar and chip_id is only different in the version nibblet. Since both will be detected by the driver anyway due to the chipid mask, they should be labeled together for dmesg msg. Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws> Link: https://lore.kernel.org/r/20230715195244.1334723-1-ahmad@khalifa.ws Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: (bt1-pvt) Convert to devm_platform_ioremap_resource()Yangtao Li
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20230704094306.21933-1-frank.li@vivo.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: (dimmtemp) Support more than 32 DIMMsPatrick Rudolph
This patch introduces support for handling more than 32 DIMMs by utilizing bitmap operations. The changes ensure that the driver can handle a higher number of DIMMs efficiently. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Link: https://lore.kernel.org/r/20230711152144.755177-1-Naresh.Solanki@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: (pmbus/max20730) Remove strlcpy occurencesAzeem Shaikh
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with direct assignment. strlcpy in this file is used to copy fixed-length strings which can be completely avoided by direct assignment and is safe to do so. strlen() is used to return the length of @tbuf. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230712214307.2424810-1-azeemshaikh38@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230714174607.4057185-1-robh@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: (lan966x) Use the devm_clk_get_enabled() helper functionChristophe JAILLET
Use the devm_clk_get_enabled() helper function instead of hand-writing it. It saves some line of codes. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/25f2ab4c61d4fc48e8200f8754bb446f2b89ea89.1688795527.git.christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: (pmbus/acbel-fsg032) Add firmware version debugfs attributeEddie James
Like the IBM CFFPS driver, export the PSU's firmware version to a debugfs attribute as reported in the manufacturer register. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20230628153453.122213-1-eajames@linux.ibm.com [groeck: Dropped unused variable; changed buffer from char to u8] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21hwmon: (asus-ec-sensosrs) fix mutex path for X670E HeroEugene Shalygin
A user reported that they observe race condition warning [1] and after looking once again into the DSDT source it was found that wrong mutex was used. [1] https://github.com/zeule/asus-ec-sensors/issues/43 Fixes: 790dec13c012 ("hwmon: (asus-ec-sensors) add ROG Crosshair X670E Hero.") Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20230821115418.25733-2-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-13Merge 6.5-rc6 into char-misc-nextGreg Kroah-Hartman
We need the char/misc fixes in here as well to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-10hwmon: (k10temp) Add thermal support for AMD Family 1Ah-based modelsAvadhut Naik
Add thermal info support for AMD Family 1Ah-based models. Support is provided on a per-socket granularity. Co-developed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Avadhut Naik <Avadhut.Naik@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230809035244.2722455-3-avadhut.naik@amd.com
2023-08-09hwmon: (aquacomputer_d5next) Add selective 200ms delay after sending ctrl reportAleksa Savic
Add a 200ms delay after sending a ctrl report to Quadro, Octo, D5 Next and Aquaero to give them enough time to process the request and save the data to memory. Otherwise, under heavier userspace loads where multiple sysfs entries are usually set in quick succession, a new ctrl report could be requested from the device while it's still processing the previous one and fail with -EPIPE. The delay is only applied if two ctrl report operations are near each other in time. Reported by a user on Github [1] and tested by both of us. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/82 Fixes: 752b927951ea ("hwmon: (aquacomputer_d5next) Add support for Aquacomputer Octo") Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20230807172004.456968-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-07hwmon: (peci/dimmtemp) Add Sapphire Rapids supportPatrick Rudolph
Extend the functionality of hwmon (peci/dimmtemp) for Sapphire Rapids platform. Add the corresponding Sapphire Rapids ID and threshold code. The patch has been tested on a 4S system with 64 DIMMs installed. Verified read of DIMM temperature thresholds & temperature. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20230725104354.33920-3-Naresh.Solanki@9elements.com
2023-08-07hwmon: (peci/cputemp) Add Intel Sapphire Rapids supportPatrick Rudolph
Add support to read DTS for reading Intel Sapphire Rapids platform. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20230725104354.33920-2-Naresh.Solanki@9elements.com
2023-08-06hwmon: (pmbus/bel-pfe) Enable PMBUS_SKIP_STATUS_CHECK for pfe1100Tao Ren
Skip status check for both pfe1100 and pfe3000 because the communication error is also observed on pfe1100 devices. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Fixes: 626bb2f3fb3c hwmon: (pmbus) add driver for BEL PFE1100 and PFE3000 Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230804221403.28931-1-rentao.bupt@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-07-27hwmon: (k10temp) Enable AMD3255 Proc to show negative temperatureBaskaran Kannan
Industrial processor i3255 supports temperatures -40 deg celcius to 105 deg Celcius. The current implementation of k10temp_read_temp rounds off any negative temperatures to '0'. To fix this, the following changes have been made. A flag 'disp_negative' is added to struct k10temp_data to support AMD i3255 processors. Flag 'disp_negative' is set if 3255 processor is found during k10temp_probe. Flag 'disp_negative' is used to determine whether to round off negative temperatures to '0' in k10temp_read_temp. Signed-off-by: Baskaran Kannan <Baski.Kannan@amd.com> Link: https://lore.kernel.org/r/20230727162159.1056136-1-Baski.Kannan@amd.com Fixes: aef17ca12719 ("hwmon: (k10temp) Only apply temperature offset if result is positive") Cc: stable@vger.kernel.org [groeck: Fixed multi-line comment] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-07-26hwmon: (pmbus_core) Fix Deadlock in pmbus_regulator_get_statusGuenter Roeck
pmbus_regulator_get_status() acquires update_lock. pmbus_regulator_get_error_flags() acquires it again, resulting in an immediate deadlock. Call _pmbus_get_flags() from pmbus_regulator_get_status() directly to avoid the problem. Reported-by: Patrick Rudolph <patrick.rudolph@9elements.com> Closes: https://lore.kernel.org/linux-hwmon/b7a3ad85-aab4-4718-a001-1d8b1c0eef36@roeck-us.net/T/#u Cc: Naresh Solanki <Naresh.Solanki@9elements.com> Cc: stable@vger.kernel.org # v6.2+ Fixes: c05f477c4ba3 ("hwmon: (pmbus/core) Implement regulator get_status") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-07-25hwmon: (pmbus_core) Fix NULL pointer dereferencePatrick Rudolph
Pass i2c_client to _pmbus_is_enabled to drop the assumption that a regulator device is passed in. This will fix the issue of a NULL pointer dereference when called from _pmbus_get_flags. Fixes: df5f6b6af01c ("hwmon: (pmbus/core) Generalise pmbus get status") Cc: stable@vger.kernel.org # v6.4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Link: https://lore.kernel.org/r/20230725125428.3966803-2-Naresh.Solanki@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-07-25hwmon: (pmbus_core) Fix pmbus_is_enabled()Patrick Rudolph
Refactor pmbus_is_enabled() to return the status without any additional processing as it is already done in _pmbus_is_enabled(). Fixes: df5f6b6af01c ("hwmon: (pmbus/core) Generalise pmbus get status") Cc: stable@vger.kernel.org # v6.4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Link: https://lore.kernel.org/r/20230725125428.3966803-1-Naresh.Solanki@9elements.com [groeck: Rephrased commit message] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-07-24hwmon: (nct7802) Fix for temp6 (PECI1) processed even if PECI1 disabledGilles Buloz
Because of hex value 0x46 used instead of decimal 46, the temp6 (PECI1) temperature is always declared visible and then displayed even if disabled in the chip Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com> Link: https://lore.kernel.org/r/DU0PR10MB62526435ADBC6A85243B90E08002A@DU0PR10MB6252.EURPRD10.PROD.OUTLOOK.COM Fixes: fcdc5739dce03 ("hwmon: (nct7802) add temperature sensor type attribute") Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-07-19hwmon: (nct6775) Fix IN scaling factors for 6798/6799Ahmad Khalifa
Scaling for VTT/VIN5/VIN6 registers were based on prior chips * Split scaling factors for 6798/6799 and assign at probe() * Pass them through driver data to sysfs functions Tested on nct6799 with old/new input/min/max Fixes: 0599682b826f ("hwmon: (nct6775) Add support for NCT6798D") Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws> Link: https://lore.kernel.org/r/20230719192848.337508-1-ahmad@khalifa.ws Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-07-18hwmon: (oxp-sensors) Move tt_toggle attribute to dev_groupsJoaquín Ignacio Aramendía
A driver should not be manually adding groups in its probe function (it will race with userspace), so replace the call to devm_device_add_groups() to use the platform dev_groups callback instead. This will allow for removal of the devm_device_add_groups() function. Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com> Fixes: be144ee49127 ("hwmon: (oxp-sensors) Add tt_toggle attribute on supported boards") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20230717222526.229984-2-samsagax@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-07-15hwmon: (aquacomputer_d5next) Fix incorrect PWM value readoutAleksa Savic
Commit 662d20b3a5af ("hwmon: (aquacomputer_d5next) Add support for temperature sensor offsets") changed aqc_get_ctrl_val() to return the value through a parameter instead of through the return value, but didn't fix up a case that relied on the old behavior. Fix it to use the proper received value and not the return code. Fixes: 662d20b3a5af ("hwmon: (aquacomputer_d5next) Add support for temperature sensor offsets") Cc: stable@vger.kernel.org Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20230714120712.16721-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-07-15hwmon: (nct6775) Fix register for nct6799Ahmad Khalifa
Datasheet and variable name point to 0xe6 Fixes: aee395bb1905 ("hwmon: (nct6755) Add support for NCT6799D") Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws> Link: https://lore.kernel.org/r/20230715145831.1304633-1-ahmad@khalifa.ws Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-07-03Merge tag 'driver-core-6.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here are a small set of changes for 6.5-rc1 for some driver core changes. Included in here are: - device property cleanups to make it easier to write "agnostic" drivers when regards to the firmware layer underneath them (DT vs. ACPI) - debugfs documentation updates - devres additions - sysfs documentation and changes to handle empty directory creation logic better - tiny kernfs optimizations - other tiny changes All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: Skip empty folders creation sysfs: Improve readability by following the kernel coding style drivers: fwnode: fix fwnode_irq_get[_byname]() ata: ahci_platform: Make code agnostic to OF/ACPI device property: Implement device_is_compatible() ACPI: Move ACPI_DEVICE_CLASS() to mod_devicetable.h base/node: Use 'property' to identify an access parameter driver core: device.h: add some missing kerneldocs kernfs: fix missing kernfs_idr_lock to remove an ID from the IDR isa: Remove unnecessary checks MAINTAINERS: add entry for auxiliary bus debugfs: Correct the 'debugfs_create_str' docs serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_array iio: adc: Use devm_krealloc_array hwmon: pmbus: Use devm_krealloc_array
2023-07-03Merge tag 'mfd-next-6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for TI TPS6594/TPS6593/LP8764 PMICs - Add support for Samsung RT5033 Battery Charger - Add support for Analog Devices MAX77540 and MAX77541 PMICs New Device Support: - Add support for SPI to Rockchip RK808 (and friends) - Add support for AXP192 PMIC to X-Powers AXP20X - Add support for AXP313a PMIC to X-Powers AXP20X - Add support for RK806 to Rockchip RK8XX Removed Device Support: - Removed MFD support for Richtek RT5033 Battery Fix-ups: - Remove superfluous code - Switch I2C drivers from .probe_new() to .probe() - Convert over to managed resources (devm_*(), etc) - Use dev_err_probe() for returning errors from .probe() - Add lots of Device Tree bindings / support - Improve cache efficiency by switching to Maple - Use own exported namespaces (NS) - Include missing and remove superfluous headers - Start using / convert to the new shutdown sys-off API - Trivial: variable / define renaming - Make use of of_property_read_reg() when requesting DT 'reg's Bug Fixes: - Fix chip revision readout due to incorrect data masking - Amend incorrect register and mask values used for charger state - Hide unused functionality at compile time - Fix resource leaks following error handling routines - Return correct error values and fix error handling in general - Repair incorrect device names - used for device matching - Remedy broken module auto-loading" * tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (51 commits) dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540 iio: adc: max77541: Add ADI MAX77541 ADC Support regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator mfd: Switch two more drivers back to use struct i2c_driver::probe dt-bindings: mfd: samsung,s5m8767: Simplify excluding properties mfd: stmpe: Only disable the regulators if they are enabled mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support dt-bindings: mfd: gateworks-gsc: Remove unnecessary fan-controller nodes mfd: core: Use of_property_read_reg() to parse "reg" mfd: stmfx: Nullify stmfx->vdd in case of error mfd: stmfx: Fix error path in stmfx_chip_init mfd: intel-lpss: Add missing check for platform_get_resource mfd: stpmic1: Add PMIC poweroff via sys-off handler mfd: stpmic1: Fixup main control register and bits naming dt-bindings: mfd: qcom,tcsr: Add the compatible for IPQ8074 mfd: tps65219: Add support for soft shutdown via sys-off API mfd: pm8008: Drop bogus i2c module alias mfd: pm8008: Fix module autoloading mfd: tps65219: Add GPIO cell instance ...
2023-06-29Merge tag 'soc-arm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC updates from Arnd Bergmann: "These are mostly minor cleanups and bugfixes that address harmless problems. The largest branch is a conversion of the omap platform to use GPIO descriptors throughout the tree, for any devices that are not fully converted to devicetree. The Samsung Exynos platform gains back support for the Exynos4212 chip that was previously unused and removed but is now used for the Samsung Galaxy Tab3" * tag 'soc-arm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) ARM: omap2: Fix copy/paste bug MAINTAINERS: Replace my email address Input: ads7846 - fix pointer cast warning Input: ads7846 - Fix usage of match data ARM: omap2: Fix checkpatch issues arm: omap1: replace printk() with pr_err macro ARM: omap: Fix checkpatch issues ARM: s3c: Switch i2c drivers back to use .probe() ARM: versatile: mark mmc_status() static ARM: spear: include "pl080.h" for pl080_get_signal() prototype ARM: sa1100: address missing prototype warnings ARM: pxa: fix missing-prototypes warnings ARM: orion5x: fix d2net gpio initialization ARM: omap2: fix missing tick_broadcast() prototype ARM: omap1: add missing include ARM: lpc32xx: add missing include ARM: imx: add missing include ARM: highbank: add missing include ARM: ep93xx: fix missing-prototype warnings ARM: davinci: fix davinci_cpufreq_init() declaration ...
2023-06-26hwmon: max31827: Switch back to use struct i2c_driver::probeUwe Kleine-König
struct i2c_driver::probe_new is about to go away. Switch the driver to use the probe callback with the same prototype. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230626085145.554616-1-u.kleine-koenig@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-24hwmon: (oxp-sensors) Add support for AOKZOE A1 PROJerrod Frost
This device is an iteration over the AOKZOE A1 with the same EC mapping and features. It also has support for tt_toggle. Signed-off-by: Jerrod Frost <jcfrosty@proton.me> Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com> Link: https://lore.kernel.org/r/20230625012347.121352-2-samsagax@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-24hwmon: (corsair-psu) update Series 2022 and 2023 supportWilken Gottwalt
The series 2022/2023 reports slightly longer vendor/product strings and shares USB ids. Technically the reply size is the USB HID packet size (64 bytes) but all the supported commands do not use more than 8 bytes and replies reporting back strings do not use more then 24 bytes (vendor and product are in one string in the newer devices now). The rest of the reply is always filled with '\0'. Also update comments and documentation accordingly. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/ZJbB72CAPmLflhHG@monster.localdomain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-23hwmon: (corsair-psu) various cleanupsWilken Gottwalt
Fix some typos, adjust documentation and comments to current state of knowledge and update coding style to be more uniform. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/ZJWf3H972hGgLK-8@monster.localdomain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-22hwmon: (corsair-psu) add support for reading PWM values and modeWilken Gottwalt
Add support for reading PWM values and mode, and update documentation accordingly. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/ZJSASByXpzoZ0XyH@monster.localdomain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-22hwmon: (pmbus/adm1275) Disable ADC while updating PMON_CONFIGGuenter Roeck
According to ADI, changing PMON_CONFIG while the ADC is running can have unexpected results. ADI recommends halting the ADC with PMON_CONTROL before setting PMON_CONFIG and then resume after. Follow ADI recommendation and disable ADC while PMON_CONFIG is updated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230614163605.3688964-3-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-22hwmon: (pmbus/adm1275) Prepare for protected write to PMON_CONFIGGuenter Roeck
According to ADI, changing PMON_CONFIG while ADC is running can have unexpected results. ADI recommends halting the ADC with PMON_CONTROL before setting PMON_CONFIG and then resume after. To prepare for this change, rename adm1275_read_pmon_config() and adm1275_write_pmon_config() to adm1275_read_samples() and adm1275_write_samples() to more accurately reflect the functionality of the code. Introduce new function adm1275_write_pmon_config() and use it for all code writing into the PMON_CONFIG register. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230614163605.3688964-2-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-18hwmon: (oxp-sensors) Simplify logic of error returnJoaquín Ignacio Aramendía
Take return logic on error out of if-else, eliminating duplicated code in tt_togle_store() function. Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com> Link: https://lore.kernel.org/r/20230617181159.32844-3-samsagax@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-18hwmon: (oxp-sensors) Remove unused headerJoaquín Ignacio Aramendía
We are not using <dev_printk.h>, remove that. Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com> Link: https://lore.kernel.org/r/20230617181159.32844-2-samsagax@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-17hwmon: (nct6755) Add support for NCT6799DGuenter Roeck
NCT6799D is mostly compatible to NCT6798D, with minor variations. Note that NCT6798D and NCT6799D have a new means to select temperature sources, and to report temperatures from those sources. This is not currently implemented, meaning that most likely not all temperatures are reported. Cc: Sebastian Arnhold <sebastian.arnhold@posteo.de> Cc: Ahmad Khalifa <ahmad@khalifa.ws> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Sebastian Arnhold <sebastian.arnhold@posteo.de> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Link: https://lore.kernel.org/r/20221228135744.281752-1-linux@roeck-us.net
2023-06-17hwmon: (oxp-sensors) Add tt_toggle attribute on supported boardsJoaquín Ignacio Aramendía
OneXPlayer boards from the last generation (both for OneXPlayer and AOK ZOE brands) have a toggle in the EC to switch the "Turbo/Silent" button into a different keyboard event. Add a means to use that "Turbo button takeover" function and expose it to userspace in a custom sysfs `tt_toggle` attribute. It can be read to take the current state. Write 1|0 to activate the function. The specific keycode is dependent on the board but can be checked by running `evtest` utility. Newer BIOS on the OneXPlayer added this function aside from string changes. Add a board enum to differentiate it from the old OneXplayer Mini AMD BIOS. Currently known supported boards: - AOK ZOE A1 - OneXPlayer Mini AMD (only newer BIOS version supported) - OneXPlayer Mini Pro Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com> Link: https://lore.kernel.org/r/20230611143332.40590-2-samsagax@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-17hwmon: (sht3x) complement sysfs interface for sts3xJuenKit Yip
Compared to sht3x, sts3x has the similar functions and operations but it has no humidity sensor. Signed-off-by: JuenKit Yip <JuenKit_Yip@hotmail.com> Link: https://lore.kernel.org/r/DB4PR10MB6261B912ADFA6BB78240596F9258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-17hwmon: (sht3x) Add new non-stardard sysfs attributeJuenKit Yip
Add "repeatability" attribute to sysfs, it could be read or written to control the sensor. Signed-off-by: JuenKit Yip <JuenKit_Yip@hotmail.com> Link: https://lore.kernel.org/r/DB4PR10MB6261B507C7656E3568DA33E39258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM [groeck: Fixed multi-line alignment; dropped check of unsigned against < 0] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-17hwmon: (sht3x) add medium repeatability supportJuenKit Yip
Add support for medium repeatability. Per datasheet: The stated repeatability is 3 times the standard deviation (3σ) of multiple consecutive measurements at the stated repeatability and at constant ambient conditions. It is a measure for the noise on the physical sensor output. Different measurement modes allow for high/medium/low repeatability. For the humidity sensor, repeatability is documented as 0.25% RH for low repeatability, 0.15% RH for medium repeatability, and 0.10% RH for high repeatability. Support all three modes. Signed-off-by: JuenKit Yip <JuenKit_Yip@hotmail.com> Link: https://lore.kernel.org/r/DB4PR10MB6261A70CD0444248ADDCC3219258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM [groeck: Added details to description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit (git 2.34.1) at 2025-07-19 14:40:37 +0000