| Age | Commit message (Collapse) | Author |
|---|
|
Since there are no more direct accesses to the indio_dev->scan_timestamp
value, it can be marked as __private and use the macro ACCESS_PRIVATE()
in order to access it. Like this, static checkers will be able to inform
in case someone tries to either write to the value, or read its value
directly.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241214191421.94172-5-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Drop conditional in favor of always calculating the timestamp value.
This simplifies the code and allows to drop usage of internal private
variable "scan_timestamp" of the struct iio_dev.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241214191421.94172-4-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Drop the recurrent allocation of the data buffer from the trigger
handler and put it in the iio_priv(). This way, the maximum amount of
channels is always allocated in favor of simpler code and drop
of usage of the internal private variable "scan_timestamp" of the
struct iio_dev.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241214191421.94172-3-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Drop a minor optimization of zeroing the padding between data and
timestamp and zero the whole structure. This is done in favor of
simpler code, and in order to drop the usage of the internal private
variable "scan_timestamp" of the struct iio_dev.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241214191421.94172-2-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Change the order of regulator enable and reset so that power supplies
are turned on before touching the reset line. Generally, chips should
have the VDRIVE supply enabled before applying voltage on any pins.
While we are at it, remove the voltage level checks. If the power
supplies are not supplying the correct voltage, this is a hardware
design problem, not a software problem.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241216-iio-regulator-cleanup-round-6-v2-1-9482164b68cb@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The documentation for struct ad5624r_state contains members that are (no
longer?) part of the structure.
Remove unnecessary docs.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/Z2KFC7ZBwmM69Qb4@mva-rohm
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for Texas Instruments OPT4060 RGBW Color sensor.
Signed-off-by: Per-Daniel Olsson <perdaniel.olsson@axis.com>
Link: https://patch.msgid.link/20241218104836.2784523-3-perdaniel.olsson@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This fixes a checkpatch warning:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
#70: FILE: drivers/iio/adc/ad_sigma_delta.c:253:
+ unsigned status_reg;
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20241218114809.1378063-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Replace the powerup / powerdown functions by a generic function to put
the sensor in STANDBY, or MEASURE mode. When configuring the FIFO for
several features of the accelerometer, it is recommended to put
measuring in STANDBY mode.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20241213211909.40896-2-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The channel index is off by one unit if AS73211_SCAN_MASK_ALL is not
set (optimized path for color channel readings), and it must be shifted
instead of leaving an empty channel for the temperature when it is off.
Once the channel index is fixed, the uninitialized channel must be set
to zero to avoid pushing uninitialized data.
Add available_scan_masks for all channels and only-color channels to let
the IIO core demux and repack the enabled channels.
Cc: stable@vger.kernel.org
Fixes: 403e5586b52e ("iio: light: as73211: New driver")
Tested-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241214-iio_memset_scan_holes-v4-1-260b395b8ed5@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The attention channel is a IIO_CHAN_INFO_PROCESSED, not a
IIO_CHAN_INFO_RAW.
Modify prox_read_raw() to support it.
Fixes: 596ef5cf654b ("iio: hid-sensor-prox: Add support for more channels")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20241122-fix-processed-v2-1-b9f606d3b519@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When introducing num_adc_channels, I overlooked some new functions
created in a meanwhile that had also the hardcoded offset. This commit
adds the new logic to these functions.
Fixes: ef67f16e365c ("iio: adc: ad7606: Introduce num_adc_channels")
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241210-ad7606_add_iio_backend_software_mode-v2-1-6619c3e50d81@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for 6.13 cycle.
The usual mixed back of fixes for ancient and recent bugs
A number of these were from an audit by Javier Carrasco of places
we may leak stack data via holes in structures passed to userspace that
were not explicitly zeroed. Very helpful effort after we found a similar
bug in review of new code.
This affected:
- dummy driver
- kionix,kmx61
- murrata,zpa2326
- rockchip,saradc
- rohm,bh1745
- veml,vcnl4035
- ti,ads1119
- ti,ads8688
- ti,tmp0006
Other fixes:
core,inkern
- Underflow fo reference count issue in error path of iio_channel_get_all()
for devices we haven't yet gotten.
tests
- Kconfig typo fix so it's possible to tell what test is being enabled.
- Check for allocation failures.
adi,ad4695
- Ensure timing requirement wrt to final clock edge vs next conversion
signal are met by adding an additional SPI transfer.
adi,ad7124
- Ensure channels are disabled at probe to avoid wrong data if channel 0
is not the first one read.
adi,ad7173
- Fix handing of multiple devices by not editing a single static
structure and instead making a per instance copy.
adi,ad9467
- Fix handing of multiple devices by not editing a single static
structure and instead making a per instance copy.
adi,ad9832
- Off by one error on input verification for phase control
adi,ad9834
- Off by one error on input verification for phase control.
atmel,at91
- In an error path don't use a variable that hasn't been initialized yet.
invensense,icm42600
- SPI burst write does not work for some icm426000 chips, disable it.
- Ensure correct handling of timestamps after resume.
st,sensors
- Add back accidentally dropped IIS2MDC compatible in binding doc.
st,stm32-dfsdm:
- label property was accidentally made a required property. Make it optional
again to fix use of older DT.
ti,ads1119
- Use a fixed size for the channel data rather than an integer, bringing
the code inline with the advertised 16 bit channel size and avoiding
userspace misinterpreting the data.
ti,ads124s08
- Use _cansleep gpio calls as no reason to prevent sleeping and it
was stopping a new board design working (trivial fix).
ti,ads1298
- Add a check on failure of devm_kasprintf()
* tag 'iio-fixes-for-6.13a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (27 commits)
iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer
iio: temperature: tmp006: fix information leak in triggered buffer
iio: inkern: call iio_device_put() only on mapped devices
iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
iio: adc: at91: call input_free_device() on allocated iio_dev
iio: adc: ad7173: fix using shared static info struct
iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
iio: adc: ti-ads1119: fix information leak in triggered buffer
iio: pressure: zpa2326: fix information leak in triggered buffer
iio: adc: rockchip_saradc: fix information leak in triggered buffer
iio: imu: kmx61: fix information leak in triggered buffer
iio: light: vcnl4035: fix information leak in triggered buffer
iio: light: bh1745: fix information leak in triggered buffer
iio: adc: ti-ads8688: fix information leak in triggered buffer
iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer
iio: test: Fix GTS test config
dt-bindings: iio: st-sensors: Re-add IIS2MDC magnetometer
iio: adc: ti-ads1298: Add NULL check in ads1298_init
iio: adc: stm32-dfsdm: handle label as an optional property
iio: adc: ad4695: fix buffered read, single sample timings
...
|
|
The ad7173 family of chips has up to four calibration modes.
Internal zero scale: removes ADC core offset errors.
Internal full scale: removes ADC core gain errors.
System zero scale: reduces offset error to the order of channel noise.
System full scale: reduces gain error to the order of channel noise.
All voltage channels will undergo an internal zero/full scale
calibration at bootup.
System zero/full scale can be done after bootup using the newly created
iio interface 'sys_calibration' and 'sys_calibration_mode'
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://patch.msgid.link/20241202-ad411x_calibration-v3-1-beb6aeec39e2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ADI PulSAR series of single-channel devices comprises differential and
pseudo-differential ADCs that don't require any input data from the host
controller. By not requiring a data input line, PulSAR devices can operate
with a 3-wire only data bus in some setups.
The AD4000 series and the single-channel PulSAR series of devices have
similar SPI transfer specifications and wiring configurations.
Single-channel PulSAR devices are slower than AD4000 and don't have a
configuration register. That taken into account, single-channel PulSARs can
be supported by the ad4000 driver without any increase in code complexity.
Extend the AD4000 driver to also support single-channel PulSAR devices.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/2bfb904e29914c3dc4905e1c87fcc735575f330d.1733147444.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The SPI transfers for AD4020, AD4021, and AD4022 have slightly different
timing specifications. Use device specific timing constraints to set SPI
transfer parameters. While tweaking time constraints, remove time related
defines including unused AD4000_TQUIET1_NS.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/a36fcf44cc00b2a498170e2ae3f005829d516266.1733147444.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ADC data is pushed to the IIO buffer along with timestamp but no
timestamp channel was provided to retried the time data.
Add a timestamp channel to provide sample capture time.
Suggested-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/d1f1bb1b726b90a3a7c1148c65d2f7fe073e2b15.1733147444.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Attributes of iio providers are exposed via sysfs. Typically, providers
pass attribute values to the iio core, which handles formatting and
printing to sysfs. However, some attributes, such as labels or extended
info, are directly formatted and printed to sysfs by provider drivers
using sysfs_emit() and sysfs_emit_at(). These helpers assume the read
buffer, allocated by sysfs fop, is page-aligned. When these attributes
are accessed by consumer drivers, the read buffer is allocated by the
consumer and may not be page-aligned, leading to failures in the
provider's callback that utilizes sysfs_emit*.
Add a check to ensure that read buffers for labels and external info
attributes are page-aligned. Update the prototype documentation as well.
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20241202-iio-kmalloc-align-v1-1-aa9568c03937@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Move sleep functions to the new fsleep() implementation. While at it,
add time unit abbreviation as a suffix of time describing variables to
make them more intuitive.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241202181907.21471-4-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of using magic number 2 as a denominator, make it intuitive by
using sizeof().
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241202181907.21471-3-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add runtime power management to the device.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241202192341.33187-4-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for the regulators described in the dt-binding.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241202192341.33187-3-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
drivers
This patch makes I2C, I3C and SPI interface drivers for ST lsm6dsx
individually selectable via Kconfig.
The default is kept unchanged - I2C, I3C and SPI interface drivers are
still selected by default if the corresponding bus support is available.
However, the patch makes it possible to explicitly disable drivers
that are not needed for a particular target.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20241203-lsm6dsx-v1-1-6d7893443bc8@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Rename the locally used variable data to st. The st refers to "state",
representing the internal state of the driver object. Further it
prepares the usage of an internal data pointer needed for the
implementation of the sensor features.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20241205171343.308963-3-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Refrase comment on the probe function, avoid naming different hardware.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20241205171343.308963-2-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
If the maximal count of channels the driver supports isn't fully
utilized, add an attribute providing the internal temperature.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/433211af8ac3f02dee58586ecb51d2e98246a095.1733504533.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
A driver that silently fails to probe is annoying and hard to debug. So
add messages in the error paths of the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/55e24392f1e4d5b9896f00a52a93c1c4b1feac43.1733504533.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
It can happen if a previous conversion was aborted the ADC pulls down
the R̅D̅Y̅ line but the event wasn't handled before. In that case enabling
the irq might immediately fire (depending on the irq controller
capabilities) and even with a rdy-gpio isn't identified as an unrelated
one.
To cure that problem check for a pending event before the measurement is
started and clear it if needed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/3ec6b61fb1e527e935133dc56f589aab4b2094a3.1733504533.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The various chips can be reset using a sequence of SPI transfers with
MOSI = 1. The length of such a sequence varies from chip to chip. Store
that length in struct ad_sigma_delta_info and replace the respective
parameter to ad_sd_reset() with it.
Note the ad7192 used to pass 48 as length but the documentation
specifies 40 as the required length. Assuming the latter is right.
(Using a too long sequence doesn't hurt apart from using a longer spi
transfer than necessary, so this is no relevant fix.)
The motivation for storing this information is that this is useful to
clear a pending R̅D̅Y̅ signal in the next change.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/9750db62fce638bf140ff48172c23bff7f785e5b.1733504533.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ad_sigma_delta driver helper uses irq_disable_nosync(). With that
one it is possible that the irq handler still runs after the
irq_disable_nosync() function call returns. Also to properly synchronize
irq disabling in the different threads proper locking is needed and
because it's unclear if the irq handler's irq_disable_nosync() call
comes first or the one in the enabler's error path, all code locations
that disable the irq must check for .irq_dis first to ensure there is
exactly one disable call per enable call.
So add a spinlock to the struct ad_sigma_delta and use it to synchronize
irq enabling and disabling. Also only act in the irq handler if the irq
is still enabled.
Fixes: af3008485ea0 ("iio:adc: Add common code for ADI Sigma Delta devices")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/9e6def47e2e773e0e15b7a2c29d22629b53d91b1.1733504533.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
ad_sd_read_reg_raw()
When struct ad_sigma_delta::keep_cs_asserted was introduced only
register writing was adapted to honor this new flag. Also respect it
when reading a register.
Fixes: df1d80aee963 ("iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion")
Reviewed-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/8d76b4ea4a4363b269886c71193b840821c724ea.1733504533.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Some of the ADCs by Analog signal their irq condition on the MISO line.
So typically that line is connected to an SPI controller and a GPIO. The
GPIO is used as input and the respective interrupt is enabled when the
last SPI transfer is completed.
Depending on the GPIO controller the toggling MISO line might make the
interrupt pending even while it's masked. In that case the irq handler
is called immediately after irq_enable() and so before the device
actually pulls that line low which results in non-sense values being
reported to the upper layers.
The only way to find out if the line was actually pulled low is to read
the GPIO. (There is a flag in AD7124's status register that also signals
if an interrupt was asserted, but reading that register toggles the MISO
line and so might trigger another spurious interrupt.)
Add the possibility to specify an interrupt GPIO in the machine
description in addition to the plain interrupt. This GPIO is used then
to check if the irq line is actually active in the irq handler.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/5be9a4cc4dc600ec384c88db01dd661a21506b9c.1733504533.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ad7124-4 has 8 analog inputs; the input select values 8 to 15 are
reserved and not to be used. These are fine for ad7124-8. For both
ad7124-4 and ad7124-8 values bigger than 15 are internal channels that
might appear as inputs in the channels specified in the device
description according to the description of commit f1794fd7bdf7 ("iio:
adc: ad7124: Remove input number limitation"), values bigger than 31
don't fit into the respective register bit field and the driver masked
them to smaller values.
Check for these invalid input specifiers and fail to probe if one is
found.
Fixes: f1794fd7bdf7 ("iio: adc: ad7124: Remove input number limitation")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/80e3bd629d2b755ab5e061c8731dafa57d08698a.1733504533.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ad7124-4 and ad7124-8 both support 16 channel registers and assigns
each channel defined in dt statically such a register. While the driver
could be a bit more clever about this, it currently isn't and specifying
more than 16 channels yields broken behaviour. So just refuse to bind in
this situation.
Fixes: b3af341bbd96 ("iio: adc: Add ad7124 support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/1b9a5a1d334e5501294f7f9f9d5893f1cdf1b0ec.1733504533.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add ADC support for the Renesas RZ/G3S SoC. The key features of this IP
include:
- 9 channels, with one dedicated to reading the temperature reported by the
Thermal Sensor Unit (TSU)
- A different default ADCMP value, which is written to the ADM3 register.
- Different default sampling rates
- ADM3.ADSMP field is 8 bits wide
- ADINT.INTEN field is 11 bits wide
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241206111337.726244-14-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The Renesas RZ/G3S SoC features a power-saving mode where power to most of
the SoC components is turned off, including the ADC IP.
Suspend/resume support has been added to the rzg2l_adc driver to restore
functionality after resuming from this power-saving mode. During suspend,
the ADC resets are asserted, and the ADC is powered down. On resume, the
ADC resets are de-asserted, the hardware is re-initialized, and the ADC
power is restored using the runtime PM APIs.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20241206111337.726244-12-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ADC on the Renesas RZ/G3S SoC includes an additional channel (channel
8) dedicated to reading temperature values from the Thermal Sensor Unit
(TSU). There is a direct in-SoC connection between the ADC and TSU IPs.
To read the temperature reported by the TSU, a different sampling rate
(compared to channels 0-7) must be configured in the ADM3 register.
The rzg2l_adc driver has been updated to support reading the TSU
temperature.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20241206111337.726244-11-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ADC IP available on the RZ/G3S differs slightly from the one found on
the RZ/G2L. The identified differences are as follows:
- different number of channels (one being used for temperature conversion);
consequently, various registers differ
- different default sampling periods
- the RZ/G3S variant lacks the ADVIC register.
To accommodate these differences, the rzg2l_adc driver has been updated by
introducing the struct rzg2l_adc_hw_params, which encapsulates the
hardware-specific differences between the IP variants. A pointer to an
object of type struct rzg2l_adc_hw_params is embedded in
struct rzg2l_adc_data.
Additionally, the completion member of struct rzg2l_adc_data was relocated
to avoid potential padding, if any.
The code has been adjusted to utilize hardware-specific parameters stored
in the new structure instead of relying on plain macros.
The check of chan->channel in rzg2l_adc_read_raw() function, against the
driver specific mask was removed as the subsystem should have already
been done this before reaching the rzg2l_adc_read_raw() function. Along
with it the local variable ch was dropped as chan->channel could be used
instead.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20241206111337.726244-10-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Enable runtime PM autosuspend support for the rzg2l_adc driver. With this
change, consecutive conversion requests will no longer cause the device to
be runtime-enabled/disabled after each request. Instead, the device will
transition based on the delay configured by the user.
This approach reduces the frequency of hardware register access during
runtime PM suspend/resume cycles, thereby saving CPU cycles.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20241206111337.726244-9-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Simplify the locking scheme in rzg2l_adc_read_raw() by using
guard(mutex)().
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20241206111337.726244-8-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Replace the driver-specific implementation with the read_poll_timeout()
function. This change simplifies the code and improves maintainability by
leveraging the standardized helper.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20241206111337.726244-7-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The use of SET_RUNTIME_PM_OPS() is now deprecated and requires
__maybe_unused annotations to avoid warnings about unused functions.
Switching to RUNTIME_PM_OPS() and pm_ptr() eliminates the need for such
annotations because the compiler can directly reference the runtime PM
functions, thereby suppressing the warnings. As a result, the
__maybe_unused markings can be removed.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20241206111337.726244-6-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
All Renesas SoCs using the rzg2l_adc driver manage ADC clocks through PM
domains. Calling pm_runtime_{resume_and_get, put_sync}() implicitly sets
the state of the clocks. As a result, the code in the rzg2l_adc driver that
explicitly manages ADC clocks can be removed, leading to simpler and
cleaner implementation.
Additionally, replace the use of rzg2l_adc_set_power() with direct PM
runtime API calls to further simplify and clean up the code.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20241206111337.726244-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Starting with commit d872bed85036 ("reset: Add devres helpers to request
pre-deasserted reset controls"), devres helpers are available to simplify
the process of requesting pre-deasserted reset controls. Update the
rzg2l_adc driver to utilize these helpers, reducing complexity in this
way.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20241206111337.726244-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Convert all occurrences of dev_err() in the probe path to dev_err_probe().
This improves readability and simplifies the code.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20241206111337.726244-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"24 hotfixes. 17 are cc:stable. 15 are MM and 9 are non-MM.
The usual bunch of singletons - please see the relevant changelogs for
details"
* tag 'mm-hotfixes-stable-2024-12-07-22-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
iio: magnetometer: yas530: use signed integer type for clamp limits
sched/numa: fix memory leak due to the overwritten vma->numab_state
mm/damon: fix order of arguments in damos_before_apply tracepoint
lib: stackinit: hide never-taken branch from compiler
mm/filemap: don't call folio_test_locked() without a reference in next_uptodate_folio()
scatterlist: fix incorrect func name in kernel-doc
mm: correct typo in MMAP_STATE() macro
mm: respect mmap hint address when aligning for THP
mm: memcg: declare do_memsw_account inline
mm/codetag: swap tags when migrate pages
ocfs2: update seq_file index in ocfs2_dlm_seq_next
stackdepot: fix stack_depot_save_flags() in NMI context
mm: open-code page_folio() in dump_page()
mm: open-code PageTail in folio_flags() and const_folio_flags()
mm: fix vrealloc()'s KASAN poisoning logic
Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()"
selftests/damon: add _damon_sysfs.py to TEST_FILES
selftest: hugetlb_dio: fix test naming
ocfs2: free inode when ocfs2_get_init_inode() fails
nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry()
...
|
|
The kx022a driver supports a few different HW variants. A chip-info
structure is used to describe sensor specific details. Support for
sensors with different measurement g-ranges was added recently,
introducing sensor specific scale arrays.
The members of the chip-info structure have been documented using
kerneldoc. The newly added members omitted the documentation. It is nice
to have all the entries documented for the sake of the consistency.
Furthermore, the scale table format may not be self explatonary, nor how
the amount of scales is informed.
Add documentation to scale table entries to maintain consistency and to
make it more obvious how the scales should be represented.
Suggested-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Link: https://patch.msgid.link/Z1LDUj-naUdGSM6n@mva-rohm
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This device returns signed, 16-bit samples as stated in its datasheet
(see 8.5.2 Data Format). That is in line with the scan_type definition
for the IIO_VOLTAGE channel, but 'unsigned int' is being used to read
and push the data to userspace.
Given that the size of that type depends on the architecture (at least
2 bytes to store values up to 65535, but its actual size is often 4
bytes), use the 's16' type to provide the same structure in all cases.
Fixes: a9306887eba4 ("iio: adc: ti-ads1119: Add driver")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20241202-ti-ads1119_s16_chan-v1-1-fafe3136dc90@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The 'scan' local struct is used to push data to user space from a
triggered buffer, but it has a hole between the two 16-bit data channels
and the timestamp. This hole is never initialized.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace.
Fixes: 91f75ccf9f03 ("iio: temperature: tmp006: add triggered buffer support")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241204-iio_memset_scan_holes-v2-1-3f941592a76d@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In the error path of iio_channel_get_all(), iio_device_put() is called
on all IIO devices, which can cause a refcount imbalance. Fix this error
by calling iio_device_put() only on IIO devices whose refcounts were
previously incremented by iio_device_get().
Fixes: 314be14bb893 ("iio: Rename _st_ functions to loose the bit that meant the staging version.")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20241204111342.1246706-1-joe@pf.is.s.u-tokyo.ac.jp
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
