summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/bnxt_re
AgeCommit message (Collapse)Author
2021-09-20RDMA/bnxt_re: Fix FRMR issue with single page MR allocationSelvin Xavier
When the FRMR is allocated with single page, driver is attempting to create a level 0 HWQ and not allocating any page because the nopte field is set. This causes the crash during post_send as the pbl is not populated. To avoid this crash, check for the nopte bit during HWQ creation with single page and create a level 1 page table and populate the pbl address correctly. Link: https://lore.kernel.org/r/1631709163-2287-9-git-send-email-selvin.xavier@broadcom.com Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-09-20RDMA/bnxt_re: Fix query SRQ failureSelvin Xavier
Fill the missing parameters for the FW command while querying SRQ. Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Link: https://lore.kernel.org/r/1631709163-2287-8-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-09-20RDMA/bnxt_re: Suppress unwanted error messagesSelvin Xavier
Terminal CQEs are expected during QP destroy. Avoid the unwanted error messages. Link: https://lore.kernel.org/r/1631709163-2287-7-git-send-email-selvin.xavier@broadcom.com Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-09-20RDMA/bnxt_re: Support multiple page sizesSelvin Xavier
HW can support multiple page sizes. Enable bits for enabling sizes from 4k to 1G by reporting page_size_cap. Link: https://lore.kernel.org/r/1631709163-2287-6-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-09-20RDMA/bnxt_re: Reduce the delay in polling for hwrm command completionSelvin Xavier
Driver has 1ms delay between the polling for atomic command completion. Polling immediately after issuing command usually doesn't report any completions. So all commands in the blocking path needs two iterations. So effectively 1ms spend on each command. HW requires much lesser time for each command. So reduce the delay to 1us and increase the iteration count to wait for the same time. Link: https://lore.kernel.org/r/1631709163-2287-5-git-send-email-selvin.xavier@broadcom.com Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-09-20RDMA/bnxt_re: Use separate response buffer for stat_ctx_freeEdwin Peer
Use separate buffers for the request and response data. Eventhough the response data is not used, providing the correct length is appropriate. Link: https://lore.kernel.org/r/1631709163-2287-4-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-09-20RDMA/bnxt_re: Update statistics counter nameSelvin Xavier
Update a statistics counter name as the interface structure got updated. Fixes: 9d6b648c3112 ("bnxt_en: Update firmware interface spec to 1.10.1.65.") Link: https://lore.kernel.org/r/1631709163-2287-3-git-send-email-selvin.xavier@broadcom.com Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-09-20RDMA/bnxt_re: Add extended statistics countersSelvin Xavier
Implement extended statistics counters for newer adapters. Check if the FW support for this command and issue the FW command only if is supported. Includes code re-organization to handle extended stats. Also, add AH and PD software counters. Link: https://lore.kernel.org/r/1631709163-2287-2-git-send-email-selvin.xavier@broadcom.com Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-09-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "I don't usually send a second PR in the merge window, but the fix to mlx5 is significant enough that it should start going through the process ASAP. Along with it comes some of the usual -rc stuff that would normally wait for a -rc2 or so. Summary: Important error case regression fixes in mlx5: - Wrong size used when computing the error path smaller allocation request leads to corruption - Confusing but ultimately harmless alignment mis-calculation Static checker warning fixes: - NULL pointer subtraction in qib - kcalloc in bnxt_re - Missing static on global variable in hfi1" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/hfi1: make hist static RDMA/bnxt_re: Prefer kcalloc over open coded arithmetic IB/qib: Fix null pointer subtraction compiler warning RDMA/mlx5: Fix xlt_chunk_align calculation RDMA/mlx5: Fix number of allocated XLT entries
2021-09-08RDMA/bnxt_re: Prefer kcalloc over open coded arithmeticLen Baker
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. In this case this is not actually dynamic sizes: both sides of the multiplication are constant values. However it is best to refactor this anyway, just to keep the open-coded math idiom out of code. So, use the purpose specific kcalloc() function instead of the argument size * count in the kzalloc() function. Also, remove the unnecessary initialization of the sqp_tbl variable since it is set a few lines later. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Link: https://lore.kernel.org/r/20210905081812.17113-1-len.baker@gmx.com Signed-off-by: Len Baker <len.baker@gmx.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-09-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "This is quite a small cycle, no major series stands out. The HNS and rxe drivers saw the most activity this cycle, with rxe being broken for a good chunk of time. The significant deleted line count is due to a SPDX cleanup series. Summary: - Various cleanup and small features for rtrs - kmap_local_page() conversions - Driver updates and fixes for: efa, rxe, mlx5, hfi1, qed, hns - Cache the IB subnet prefix - Rework how CRC is calcuated in rxe - Clean reference counting in iwpm's netlink - Pull object allocation and lifecycle for user QPs to the uverbs core code - Several small hns features and continued general code cleanups - Fix the scatterlist confusion of orig_nents/nents introduced in an earlier patch creating the append operation" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (90 commits) RDMA/mlx5: Relax DCS QP creation checks RDMA/hns: Delete unnecessary blank lines. RDMA/hns: Encapsulate the qp db as a function RDMA/hns: Adjust the order in which irq are requested and enabled RDMA/hns: Remove RST2RST error prints for hw v1 RDMA/hns: Remove dqpn filling when modify qp from Init to Init RDMA/hns: Fix QP's resp incomplete assignment RDMA/hns: Fix query destination qpn RDMA/hfi1: Convert to SPDX identifier IB/rdmavt: Convert to SPDX identifier RDMA/hns: Bugfix for incorrect association between dip_idx and dgid RDMA/hns: Bugfix for the missing assignment for dip_idx RDMA/hns: Bugfix for data type of dip_idx RDMA/hns: Fix incorrect lsn field RDMA/irdma: Remove the repeated declaration RDMA/core/sa_query: Retry SA queries RDMA: Use the sg_table directly and remove the opencoded version from umem lib/scatterlist: Fix wrong update of orig_nents lib/scatterlist: Provide a dedicated function to support table append RDMA/hns: Delete unused hns bitmap interface ...
2021-08-30Merge branch 'sg_nents' into rdma.git for-nextJason Gunthorpe
From Maor Gottlieb ==================== Fix the use of nents and orig_nents in the sg table append helpers. The nents should be used by the DMA layer to store the number of DMA mapped sges, the orig_nents is the number of CPU sges. Since the sg append logic doesn't always create a SGL with exactly orig_nents entries store a total_nents as well to allow the table to be properly free'd and reorganize the freeing logic to share across all the use cases. ==================== Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> * 'sg_nents': RDMA: Use the sg_table directly and remove the opencoded version from umem lib/scatterlist: Fix wrong update of orig_nents lib/scatterlist: Provide a dedicated function to support table append
2021-08-19RDMA/bnxt_re: Remove unpaired rtnl unlock in bnxt_re_dev_init()Dinghao Liu
The fixed commit removes all rtnl_lock() and rtnl_unlock() calls in function bnxt_re_dev_init(), but forgets to remove a rtnl_unlock() in the error handling path of bnxt_re_register_netdev(), which may cause a deadlock. This bug is suggested by a static analysis tool. Fixes: c2b777a95923 ("RDMA/bnxt_re: Refactor device add/remove functionalities") Link: https://lore.kernel.org/r/20210816085531.12167-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-08-19RDMA/bnxt_re: Add missing spin lock initializationNaresh Kumar PBS
Add the missing initialization of srq lock. Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Link: https://lore.kernel.org/r/1629343553-5843-3-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-08-03RDMA: Globally allocate and release QP memoryLeon Romanovsky
Convert QP object to follow IB/core general allocation scheme. That change allows us to make sure that restrack properly kref the memory. Link: https://lore.kernel.org/r/48e767124758aeecc433360ddd85eaa6325b34d9.1627040189.git.leonro@nvidia.com Reviewed-by: Gal Pressman <galpress@amazon.com> #efa Tested-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> #rdma and core Tested-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-07-12RDMA/bnxt_re: Fix stats countersNaresh Kumar PBS
Statistical counters are not incrementing in some adapter versions with newer FW. This is due to the stats context length mismatch between FW and driver. Since the L2 driver updates the length correctly, use the stats length from L2 driver while allocating the DMA'able memory and creating the stats context. Fixes: 9d6b648c3112 ("bnxt_en: Update firmware interface spec to 1.10.1.65.") Link: https://lore.kernel.org/r/1626010296-6076-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-24RDMA/bnxt_re: Fix uninitialized struct bit field rsvd1Colin Ian King
The bit field rsvd1 in resp is not being initialized and garbage data is being copied from the stack back to userspace via the ib_copy_to_udata call. Fix this by setting the entire struct resp to zero; this will ensure that further new bit fields in the future will be zero'd too. Link: https://lore.kernel.org/r/20210623182437.163801-1-colin.king@canonical.com Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 879740517dab ("RDMA/bnxt_re: Update ABI to pass wqe-mode to user space") Signed-off-by: Colin Ian King <colin.king@canonical.com> [jgg: remove extra zeroing] Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21RDMA/bnxt_re: Update ABI to pass wqe-mode to user spaceDevesh Sharma
Changing ucontext ABI response structure to pass wqe_mode to user library. A flag in comp_mask has been set to indicate presence of wqe_mode. Moved wqe-mode ABI to uapi/rdma/bnxt_re-abi.h Link: https://lore.kernel.org/r/20210616202817.1185276-1-devesh.sharma@broadcom.com Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-16RDMA: Remove rdma_set_device_sysfs_group()Jason Gunthorpe
The driver's device group can be specified as part of the ops structure like the device's port group. No need for the complicated API. Link: https://lore.kernel.org/r/8964785a34fd3a29ff5b6693493f575b717e594d.1623427137.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-16RDMA: Split the alloc_hw_stats() ops to port and device variantsJason Gunthorpe
This is being used to implement both the port and device global stats, which is causing some confusion in the drivers. For instance EFA and i40iw both seem to be misusing the device stats. Split it into two ops so drivers that don't support one or the other can leave the op NULL'd, making the calling code a little simpler to understand. Link: https://lore.kernel.org/r/1955c154197b2a159adc2dc97266ddc74afe420c.1623427137.git.leonro@nvidia.com Tested-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-03RDMA/bnxt_re: Enable global atomic ops if platform supportsDevesh Sharma
Enabling Atomic operations for Gen P5 devices if the underlying platform supports global atomic ops. Link: https://lore.kernel.org/r/20210603131534.982257-2-devesh.sharma@broadcom.com Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-05-20RDMA/bnxt_re: Drop unnecessary NULL checks after container_ofGuenter Roeck
The result of container_of() operations is never NULL unless the first element of the embedding structure is extracted. This is either not the case here, or the pointer passed to container_of() is known to be not NULL. The NULL checks are therefore unnecessary and misleading. Remove them. The channges in this patch were made automatically with the following Coccinelle script. @@ type t; identifier v; statement s; @@ <+... ( t v = container_of(...); | v = container_of(...); ) ... when != v - if (\( !v \| v == NULL \) ) s ...+> Link: https://lore.kernel.org/r/20210514153606.1377119-1-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-27RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_resLv Yunlong
In bnxt_qplib_alloc_res, it calls bnxt_qplib_alloc_dpi_tbl(). Inside bnxt_qplib_alloc_dpi_tbl, dpit->dbr_bar_reg_iomem is freed via pci_iounmap() in unmap_io error branch. After the callee returns err code, bnxt_qplib_alloc_res calls bnxt_qplib_free_res()->bnxt_qplib_free_dpi_tbl() in the fail branch. Then dpit->dbr_bar_reg_iomem is freed in the second time by pci_iounmap(). My patch set dpit->dbr_bar_reg_iomem to NULL after it is freed by pci_iounmap() in the first time, to avoid the double free. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/20210426140614.6722-1-lyl2019@mail.ustc.edu.cn Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-19RDMA/bnxt_re: Get rid of custom module reference countingLeon Romanovsky
Instead of manually messing with parent driver module reference counting rely on export symbol mechanism to ensure that proper probe/remove chain is performed. Link: https://lore.kernel.org/r/20210401065715.565226-4-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-By: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-19RDMA/bnxt_re: Create direct symbol link between bnxt modulesLeon Romanovsky
Convert indirect probe call to its direct equivalent to create a symbol link between RDMA and netdev modules. This will give us an ability to remove custom module reference counting that doesn't belong to the driver. Link: https://lore.kernel.org/r/20210401065715.565226-3-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-By: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-19RDMA/bnxt_re: Depend on bnxt ethernet driver and not blindly select itLeon Romanovsky
The "select" kconfig keyword provides reverse dependency, however it doesn't check that selected symbol meets its own dependencies. Usually "select" is used for non-visible symbols, so instead of trying to keep dependencies in sync with BNXT ethernet driver, simply "depends on" it, like Kconfig documentation suggest. * CONFIG_PCI is already required by BNXT * CONFIG_NETDEVICES and CONFIG_ETHERNET are needed to chose BNXT Link: https://lore.kernel.org/r/20210401065715.565226-2-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-By: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-12RDMA/bnxt_re: Fix error return code in bnxt_qplib_cq_process_terminal()Wang Wensheng
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/20210408113137.97202-1-wangwensheng4@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-03-26RDMA/bnxt_re: Move device to error state upon device crashSelvin Xavier
When the L2 driver detects a device crash or device undergone reset, it invokes a stop callback to recover from error. The current RoCE driver doesn't recover the device. So move the device to error state and dispatch fatal events to all qps Release the MSIx vectors to avoid a crash when L2 driver disables the MSIx. Also, check for the device state to avoid posting further commands to the HW. Link: https://lore.kernel.org/r/1615968942-30970-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-03-26RDMA: Support more than 255 rdma portsMark Bloch
Current code uses many different types when dealing with a port of a RDMA device: u8, unsigned int and u32. Switch to u32 to clean up the logic. This allows us to make (at least) the core view consistent and use the same type. Unfortunately not all places can be converted. Many uverbs functions expect port to be u8 so keep those places in order not to break UAPIs. HW/Spec defined values must also not be changed. With the switch to u32 we now can support devices with more than 255 ports. U32_MAX is reserved to make control logic a bit easier to deal with. As a device with U32_MAX ports probably isn't going to happen any time soon this seems like a non issue. When a device with more than 255 ports is created uverbs will report the RDMA device as having 255 ports as this is the max currently supported. The verbs interface is not changed yet because the IBTA spec limits the port size in too many places to be u8 and all applications that relies in verbs won't be able to cope with this change. At this stage, we are extending the interfaces that are using vendor channel solely Once the limitation is lifted mlx5 in switchdev mode will be able to have thousands of SFs created by the device. As the only instance of an RDMA device that reports more than 255 ports will be a representor device and it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other ULPs aren't effected by this change and their sysfs/interfaces that are exposes to userspace can remain unchanged. While here cleanup some alignment issues and remove unneeded sanity checks (mainly in rdmavt), Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org Signed-off-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-18RDMA/bnxt_re: Allow bigger MR creationSelvin Xavier
Allow users to create bigger MRs. Remove the check that prevented creating MRs with number of pages more than 512. Link: https://lore.kernel.org/r/1610012608-14528-3-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-18RDMA/bnxt_re: Code refactor while populating user MRsSelvin Xavier
Refactor code that populates MR page buffer list. Instead of allocating a pbl_tbl to hold the buffer list, pass the struct ib_umem directly to bnxt_qplib_alloc_init_hwq() as done for other user space memories. Fix the PBL level to handle the above mentioned change. Also, remove an unwanted flag from the input to bnxt_qplib_reg_mr() function. Link: https://lore.kernel.org/r/1610012608-14528-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-07RDMA/bnxt_re: Fix max_qp_wrs reportedSelvin Xavier
While creating qps, the driver adds one extra entry to the sq size passed by the ULPs in order to avoid queue full condition. When ULPs creates QPs with max_qp_wr reported, driver creates QP with 1 more than the max_wqes supported by HW. Create QP fails in this case. To avoid this error, reduce 1 entry in max_qp_wqes and report it to the stack. Link: https://lore.kernel.org/r/1606741986-16477-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-27RDMA/bnxt_re: Fix entry size during SRQ createSelvin Xavier
Only static WQE is supported for SRQ. So always use the max supported SGEs while calculating SRQ entry size. Fixes: 2bb3c32c5c5f ("RDMA/bnxt_re: Change wr posting logic to accommodate variable wqes") Link: https://lore.kernel.org/r/1602569752-12745-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Convert sysfs device * show functions to use sysfs_emit()Joe Perches
Done with cocci script: @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - sprintf(buf, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - snprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - scnprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; expression chr; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - strcpy(buf, chr); + sysfs_emit(buf, chr); ...> } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - sprintf(buf, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - snprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - scnprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... - len += scnprintf(buf + len, PAGE_SIZE - len, + len += sysfs_emit_at(buf, len, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; expression chr; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { ... - strcpy(buf, chr); - return strlen(buf); + return sysfs_emit(buf, chr); } Link: https://lore.kernel.org/r/7f406fa8e3aa2552c022bec680f621e38d1fe414.1602122879.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Remove AH from uverbs_cmd_maskJason Gunthorpe
Drivers that need a uverbs AH should instead set the create_user_ah() op similar to reg_user_mr(). MODIFY_AH and QUERY_AH cmds were never implemented so are just deleted. Link: https://lore.kernel.org/r/11-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Check create_flags during create_qpJason Gunthorpe
Each driver should check that the QP attrs create_flags is supported. Unfortuantely when create_flags was added to the QP attrs the drivers were not updated. uverbs_ex_cmd_mask was used to block it - even though kernel drivers use these flags too. Check that flags is zero in all drivers that don't use it, remove IB_USER_VERBS_EX_CMD_CREATE_QP from uverbs_ex_cmd_mask. Fix the error code to be EOPNOTSUPP. Link: https://lore.kernel.org/r/8-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Check flags during create_cqJason Gunthorpe
Each driver should check that the CQ attrs is supported. Unfortuantely when flags was added to the CQ attrs the drivers were not updated, uverbs_ex_cmd_mask was used to block it. This was missed when create CQ was converted to ioctl, so non-zero flags could have been passed into drivers. Check that flags is zero in all drivers that don't use it, remove IB_USER_VERBS_EX_CMD_CREATE_CQ from uverbs_ex_cmd_mask. Fixes: 41b2a71fc848 ("IB/uverbs: Move ioctl path of create_cq and destroy_cq to a new file") Link: https://lore.kernel.org/r/7-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Check attr_mask during modify_qpJason Gunthorpe
Each driver should check that it can support the provided attr_mask during modify_qp. IB_USER_VERBS_EX_CMD_MODIFY_QP was being used to block modify_qp_ex because the driver didn't check RATE_LIMIT. Link: https://lore.kernel.org/r/6-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Move more uverbs_cmd_mask settings to the coreJason Gunthorpe
These functions all depend on the driver providing a specific op: - REREG_MR is rereg_user_mr(). bnxt_re set this without providing the op - ATTACH/DEATCH_MCAST is attach_mcast()/detach_mcast(). usnic set this without providing the op - OPEN_QP doesn't involve the driver but requires a XRCD. qedr provides xrcd but forgot to set it, usnic doesn't provide XRCD but set it anyhow. - OPEN/CLOSE_XRCD are the ops alloc_xrcd()/dealloc_xrcd() - CREATE_SRQ/DESTROY_SRQ are the ops create_srq()/destroy_srq() - QUERY/MODIFY_SRQ is op query_srq()/modify_srq(). hns sets this but sometimes supplies a NULL op. - RESIZE_CQ is op resize_cq(). bnxt_re sets this boes doesn't supply an op - ALLOC/DEALLOC_MW is alloc_mw()/dealloc_mw(). cxgb4 provided an (now deleted) implementation but no userspace All drivers were checked that no drivers provide the op without also setting uverbs_cmd_mask so this should have no functional change. Link: https://lore.kernel.org/r/4-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Remove elements in uverbs_cmd_mask that all drivers setJason Gunthorpe
This is a step toward eliminating uverbs_cmd_mask. Preset this list in the core code. Only the op reg_user_mr wasn't already being required from the drivers. Link: https://lore.kernel.org/r/3-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA/bnxt_re: Set queue pair state when being queriedKamal Heib
The API for ib_query_qp requires the driver to set cur_qp_state on return, add the missing set. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/20201021114952.38876-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-16RDMA: Explicitly pass in the dma_device to ib_register_deviceJason Gunthorpe
The code in setup_dma_device has become rather convoluted, move all of this to the drivers. Drives now pass in a DMA capable struct device which will be used to setup DMA, or drivers must fully configure the ibdev for DMA and pass in NULL. Other than setting the masks in rvt all drivers were doing this already anyhow. mthca, mlx4 and mlx5 were already setting up maximum DMA segment size for DMA based on their hardweare limits in: __mthca_init_one() dma_set_max_seg_size (1G) __mlx4_init_one() dma_set_max_seg_size (1G) mlx5_pci_init() set_dma_caps() dma_set_max_seg_size (2G) Other non software drivers (except usnic) were extended to UINT_MAX [1, 2] instead of 2G as was before. [1] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/ [2] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/ Link: https://lore.kernel.org/r/20201008082752.275846-1-leon@kernel.org Link: https://lore.kernel.org/r/6b2ed339933d066622d5715903870676d8cc523a.1602590106.git.mchehab+huawei@kernel.org Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-06RDMA/bnxt_re: Fix sizeof mismatch for allocation of pbl_tbl.Colin Ian King
An incorrect sizeof is being used, u64 * is not correct, it should be just u64 for a table of umem_pgs number of u64 items in the pbl_tbl. Use the idiom sizeof(*pbl_tbl) to get the object type without the need to explicitly use u64. Link: https://lore.kernel.org/r/20201006114700.537916-1-colin.king@canonical.com Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)") Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-06RDMA/bnxt_re: Use rdma_umem_for_each_dma_block()Jason Gunthorpe
This driver is taking the SGL out of the umem and passing it through a struct bnxt_qplib_sg_info. Instead of passing the SGL pass the umem and then use rdma_umem_for_each_dma_block() directly. Move the calls of ib_umem_num_dma_blocks() closer to their actual point of use, npages is only set for non-umem pbl flows. Link: https://lore.kernel.org/r/0-v1-b37437a73f35+49c-bnxt_re_dma_block_jgg@nvidia.com Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Tested-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-18Merge branch 'mlx5_active_speed' into rdma.git for-nextJason Gunthorpe
Leon Romanovsky says: ==================== IBTA declares speed as 16 bits, but kernel stores it in u8. This series fixes in-kernel declaration while keeping external interface intact. ==================== Based on the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux due to dependencies. * branch 'mlx5_active_speed': RDMA: Fix link active_speed size RDMA/mlx5: Delete duplicated mlx5_ptys_width enum net/mlx5: Refactor query port speed functions
2020-09-18RDMA: Fix link active_speed sizeAharon Landau
According to the IB spec active_speed size should be u16 and not u8 as before. Changing it to allow further extensions in offered speeds. Link: https://lore.kernel.org/r/20200917090223.1018224-4-leon@kernel.org Signed-off-by: Aharon Landau <aharonl@mellanox.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-11Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "A number of driver bug fixes and a few recent regressions: - Several bug fixes for bnxt_re. Crashing, incorrect data reported, and corruption on new HW - Memory leak and crash in rxe - Fix sysfs corruption in rxe if the netdev name is too long - Fix a crash on error unwind in the new cq_pool code - Fix kobject panics in rtrs by working device lifetime properly - Fix a data corruption bug in iser target related to misaligned buffers" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/isert: Fix unaligned immediate-data handling RDMA/rtrs-srv: Set .release function for rtrs srv device during device init RDMA/bnxt_re: Remove set but not used variable 'qplib_ctx' RDMA/core: Fix reported speed and width RDMA/core: Fix unsafe linked list traversal after failing to allocate CQ RDMA/bnxt_re: Remove the qp from list only if the qp destroy succeeds RDMA/bnxt_re: Fix driver crash on unaligned PSN entry address RDMA/bnxt_re: Restrict the max_gids to 256 RDMA/bnxt_re: Static NQ depth allocation RDMA/bnxt_re: Fix the qp table indexing RDMA/bnxt_re: Do not report transparent vlan from QP1 RDMA/mlx4: Read pkey table length instead of hardcoded value RDMA/rxe: Fix panic when calling kmem_cache_create() RDMA/rxe: Fix memleak in rxe_mem_init_user RDMA/rxe: Fix the parent sysfs read when the interface has 15 chars RDMA/rtrs-srv: Replace device_register with device_initialize and device_add
2020-09-11RDMA/bnxt: Do not use ib_umem_page_count() or ib_umem_num_pages()Jason Gunthorpe
ib_umem_page_count() returns the number of 4k entries required for a DMA map, but bnxt_re already computes a variable page size. The correct API to determine the size of the page table array is ib_umem_num_dma_blocks(). Fix the overallocation of the page array in fill_umem_pbl_tbl() when working with larger page sizes by using the right function. Lightly re-organize this function to make it clearer. Replace the other calls to ib_umem_num_pages(). Fixes: d85582517e91 ("RDMA/bnxt_re: Use core helpers to get aligned DMA address") Link: https://lore.kernel.org/r/11-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09RDMA/umem: Add rdma_umem_for_each_dma_block()Jason Gunthorpe
This helper does the same as rdma_for_each_block(), except it works on a umem. This simplifies most of the call sites. Link: https://lore.kernel.org/r/4-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09RDMA: Allow fail of destroy CQLeon Romanovsky
Like any other verbs objects, CQ shouldn't fail during destroy, but mlx5_ib didn't follow this contract with mixed IB verbs objects with DEVX. Such mix causes to the situation where FW and kernel are fully interdependent on the reference counting of each side. Kernel verbs and drivers that don't have DEVX flows shouldn't fail. Fixes: e39afe3d6dbd ("RDMA: Convert CQ allocations to be under core responsibility") Link: https://lore.kernel.org/r/20200907120921.476363-7-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
generated by cgit (git 2.34.1) at 2025-07-19 01:15:26 +0000