Age | Commit message (Collapse) | Author |
|
Replace (some) calls to pr_xxx() in rxe_net.c with rxe_dbg_xxx().
Calls with a rxe device not yet in scope are left as is.
Link: https://lore.kernel.org/r/20221103171013.20659-7-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Replace calls to pr_xxx() int rxe_mw.c with rxe_dbg_xxx().
Link: https://lore.kernel.org/r/20221103171013.20659-6-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Replace calls to pr_xxx() in rxe_mr.c by rxe_dbg_mr().
Link: https://lore.kernel.org/r/20221103171013.20659-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Replace calls to pr_xxx() in rxe_cq.c with rxe_dbg_xxx().
Link: https://lore.kernel.org/r/20221103171013.20659-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Replace calls to pr_xxx() in rxe_comp.c with rxe_dbg_xxx().
Link: https://lore.kernel.org/r/20221103171013.20659-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add macros borrowed from siw to call dynamic debug macro ibdev_dbg.
Link: https://lore.kernel.org/r/20221103171013.20659-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The function check_length() is supposed to check the length of inbound
packets on responder, but it actually has been a stub since the driver was
born. Let it check the payload length and the DMA length.
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://lore.kernel.org/r/20221107055338.357184-1-matsuda-daisuke@fujitsu.com
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Instead of 'goto and return', just return directly to
simplify the error handling, and avoid some unnecessary
return value check.
Link: https://lore.kernel.org/r/20221028075053.3990467-1-xuhaoyue1@hisilicon.com
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
mr->map_shift is set to ilog2(RXE_BUF_PER_MAP) in both rxe_mr_init() and
rxe_mr_alloc() so remove the duplicate one in rxe_mr_init().
Link: https://lore.kernel.org/r/1666855893-145-1-git-send-email-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
We should reject the requests with access flags that is not registered by
MR/MW. For example, lookup_mr() should return NULL when requested access
is 0x03 and mr->access is 0x01.
Link: https://lore.kernel.org/r/20220927055337.22630-2-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Rename task-state_lock to task->lock
Link: https://lore.kernel.org/r/20221021200118.2163-7-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The subroutine rxe_do_task() is only called in rxe_task.c. This patch
makes it static and renames it do_task().
Link: https://lore.kernel.org/r/20221021200118.2163-6-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Split rxe_run_task(task, sched) into rxe_run_task(task) and
rxe_sched_task(task).
Link: https://lore.kernel.org/r/20221021200118.2163-5-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The name field in struct rxe_task is never used. This patch removes it.
Link: https://lore.kernel.org/r/20221021200118.2163-4-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The calls to spin_lock_init() for the tasklet spinlocks in
rxe_qp_init_misc() are redundant since they are intiialized in
rxe_init_task(). This patch removes them.
Link: https://lore.kernel.org/r/20221021200118.2163-3-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Remove unneeded include files.
Link: https://lore.kernel.org/r/20221021200118.2163-2-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
rxe_recheck_mr() will increase mr's ref_cnt, so we should call rxe_put(mr)
to drop mr's ref_cnt in RESPST_ERR_RNR to avoid below warning:
WARNING: CPU: 0 PID: 4156 at drivers/infiniband/sw/rxe/rxe_pool.c:259 __rxe_cleanup+0x1df/0x240 [rdma_rxe]
...
Call Trace:
rxe_dereg_mr+0x4c/0x60 [rdma_rxe]
ib_dereg_mr_user+0xa8/0x200 [ib_core]
ib_mr_pool_destroy+0x77/0xb0 [ib_core]
nvme_rdma_destroy_queue_ib+0x89/0x240 [nvme_rdma]
nvme_rdma_free_queue+0x40/0x50 [nvme_rdma]
nvme_rdma_teardown_io_queues.part.0+0xc3/0x120 [nvme_rdma]
nvme_rdma_error_recovery_work+0x4d/0xf0 [nvme_rdma]
process_one_work+0x582/0xa40
? pwq_dec_nr_in_flight+0x100/0x100
? rwlock_bug.part.0+0x60/0x60
worker_thread+0x2a9/0x700
? process_one_work+0xa40/0xa40
kthread+0x168/0x1a0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
Link: https://lore.kernel.org/r/20221024052049.20577-1-lizhijian@fujitsu.com
Fixes: 8a1a0be894da ("RDMA/rxe: Replace mr by rkey in responder resources")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Before the testing, we already passed it to rxe_mr_copy() where mr could
be dereferenced. so this checking is not needed.
The only way that mr is NULL is when it reaches below line 780 with
'qp->resp.mr = NULL', which is not possible in Bob's explanation[1].
778 if (res->state == rdatm_res_state_new) {
779 if (!res->replay) {
780 mr = qp->resp.mr;
781 qp->resp.mr = NULL;
782 } else {
[1] https://lore.kernel.org/lkml/30ff25c4-ce66-eac4-eaa2-64c0db203a19@gmail.com/
Link: https://lore.kernel.org/r/1666582315-2-1-git-send-email-lizhijian@fujitsu.com
CC: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Requesting nodes do not handle a reported error correctly if it is
generated in the middle of multi-packet Read responses, and the node tries
to resend the request endlessly. Let completer terminate the connection in
that case.
Link: https://lore.kernel.org/r/20221013014724.3786212-2-matsuda-daisuke@fujitsu.com
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Currently, responder can reply packets with invalid payloads if it fails
to copy messages to the packets. Add an error handling in read_reply() to
inform a requesting node of the failure.
Link: https://lore.kernel.org/r/20221013014724.3786212-1-matsuda-daisuke@fujitsu.com
Suggested-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The member 'type' is included in both struct rxe_mr and struct ib_mr
so remove the duplicate one of struct rxe_mr.
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Link: https://lore.kernel.org/r/20221021134513.17730-1-yangx.jy@fujitsu.com
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Incoming packets to rxe are passed from UDP layer using an encapsulation
socket. If there are any clients reachable to a node, they can invoke the
encapsulation handler arbitrarily by sending malicious or irrelevant
packets. This can potentially cause a message overflow and a subsequent
slowdown on the node.
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://lore.kernel.org/r/20220929080023.304242-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
In include/uapi/rdma/rdma_user_rxe.h there are redundant copies of num_sge
in the rxe_send_wr, rxe_recv_wqe, and rxe_dma_info. Only the ones in
rxe_dma_info are actually used by the rxe kernel driver.
The userspace would set these values, but the kernel never read them.
This change has no affect on the current ABI and new or old versions of
rdma-core operate correctly with new or old versions of the kernel rxe
driver.
Link: https://lore.kernel.org/r/20220913222716.18335-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Currently in resize_finish() in rxe_queue.c there is a loop which copies
the entries in the original queue into a newly allocated queue. The
termination logic for this loop is incorrect. The call to
queue_next_index() updates cons but has no effect on whether the queue is
empty. So if the queue starts out empty nothing is copied but if it is not
then the loop will run forever. This patch changes the loop to compare the
value of cons to the original producer index.
Fixes: ae6e843fe08d0 ("RDMA/rxe: Add memory barriers to kernel queues")
Link: https://lore.kernel.org/r/20220825221446.6512-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Move setting of pd in mr objects ahead of any possible errors so that it
will always be set in rxe_mr_cleanup() to avoid seg faults when
rxe_put(mr_pd(mr)) is called.
Fixes: cf40367961d8 ("RDMA/rxe: Move mr cleanup code to rxe_mr_cleanup()")
Link: https://lore.kernel.org/r/20220805183153.32007-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Most code in send_ack() and send_atomic_ack() are duplicate, move them to
a new helper send_common_ack().
In newer IBA spec, some opcodes require acknowledge with a zero-length
read response, with this new helper, we can easily implement it later.
Link: https://lore.kernel.org/r/1659335010-2-1-git-send-email-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
rxe_mr and ib_mr have interchangeable members. Remove device specific
members and use ones in the generic struct. Both 'iova' and 'length' are
filled in ib_uverbs or ib_core layer after MR registration.
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://lore.kernel.org/r/20220921080844.1616883-2-matsuda-daisuke@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
They could be triggered by user APIs with invalid parameters.
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/1662518901-2-2-git-send-email-lizhijian@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
struct ib_qp_cap {
u32 max_send_wr;
u32 max_recv_wr;
u32 max_send_sge;
u32 max_recv_sge;
u32 max_inline_data;
...
To avoid getting a negative value from dmesg:
[410580.579965] rdma_rxe: invalid send sge = 65535 > 32
[410580.583818] rdma_rxe: invalid send wr = -1 > 1048576
[410582.771323] rdma_rxe: invalid recv sge = 65535 > 32
[410582.775310] rdma_rxe: invalid recv wr = -1 > 1048576
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/1662518901-2-1-git-send-email-lizhijian@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
An incoming Read request causes multiple Read responses. If a user MR to
copy data from is unavailable or responder cannot send a reply, then the
error messages can be printed for each response attempt, resulting in
message overflow.
Link: https://lore.kernel.org/r/20220829071218.1639065-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The member variable obj in struct rxe_task is not needed.
So remove it to save memory.
Link: https://lore.kernel.org/r/20220822011615.805603-4-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When sock_create_kern in the function rxe_qp_init_req fails,
qp->sk is set to NULL.
Then the function rxe_create_qp will call rxe_qp_do_cleanup
to handle allocated resource.
Before handling qp->sk, this variable should be checked.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220822011615.805603-3-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When rxe_queue_init in the function rxe_qp_init_req fails,
both qp->req.task.func and qp->req.task.arg are not initialized.
Because of creation of qp fails, the function rxe_create_qp will
call rxe_qp_do_cleanup to handle allocated resource.
Before calling __rxe_do_task, both qp->req.task.func and
qp->req.task.arg should be checked.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220822011615.805603-2-yanjun.zhu@linux.dev
Reported-by: syzbot+ab99dc4c6e961eed8b8e@syzkaller.appspotmail.com
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Commit 1e75550648da ("Revert "RDMA/rxe: Create duplicate mapping tables for
FMRs"") brought back the member 'va' to struct rxe_mr. However, it is
actually used by nobody and thus can be removed.
Fixes: 1e75550648da ("Revert "RDMA/rxe: Create duplicate mapping tables for FMRs"")
Link: https://lore.kernel.org/r/20220829012335.1212697-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In the function rxe_create_qp(), rxe_qp_from_init() is called to
initialize qp, internally things like the spin locks are not setup until
rxe_qp_init_req().
If an error occures before this point then the unwind will call
rxe_cleanup() and eventually to rxe_qp_do_cleanup()/rxe_cleanup_task()
which will oops when trying to access the uninitialized spinlock.
Move the spinlock initializations earlier before any failures.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220731063621.298405-1-yanjun.zhu@linux.dev
Reported-by: syzbot+833061116fa28df97f3b@syzkaller.appspotmail.com
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Currently the requester can continue to process send wqes after an local
qp operation error is detected because the setting of the qp state to the
error state is deferred until later. This patch splits the qp state for
the completer and requester into two separate states and sets
qp->req.state = QP_STATE_ERROR as soon as the error is detected before
another wqe can be executed.
Link: https://lore.kernel.org/r/1658307368-1851-4-git-send-email-lizhijian@fujitsu.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
As per IBTA specification, all subsequent WQEs while QP is in error state
should be completed with a flush error.
Here we check QP_STATE_ERROR after req_next_wqe() so that rxe_completer()
has chance to be called where it will set CQ state to FLUSH ERROR and the
completion can associate with its WQE.
Link: https://lore.kernel.org/r/1658307368-1851-3-git-send-email-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Previously, if user space keeps sending abnormal wqe, queue.index will
keep increasing while qp->req.wqe_index doesn't. Once
qp->req.wqe_index==queue.index in next round, req_next_wqe() will treat
queue as empty. In such case, no new completion would be generated.
Update wqe_index for each wqe completion so that req_next_wqe() can get
next wqe properly.
Link: https://lore.kernel.org/r/1658307368-1851-2-git-send-email-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Below 2 commits will be reverted:
commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()")
commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs")
The community has a few bug reports which pointed this commit at last.
Some proposals are raised up in the meantime but all of them have no
follow-up operation.
The previous commit led the map_set of FMR to be not available any more if
the MR is registered again after invalidating. Although the mentioned
patch try to fix a potential race in building/accessing the same table
for fast memory regions, it broke rtrs etc ULPs. Since the latter could
be worse, revert this patch.
With previous commit, it's observed that a same MR in rnbd server will
trigger below code path:
-> rxe_mr_init_fast()
|-> alloc map_set() # map_set is uninitialized
|...-> rxe_map_mr_sg() # build the map_set
|-> rxe_mr_set_page()
|...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means
# we can access host memory(such rxe_mr_copy)
|...-> rxe_invalidate_mr() # mr->state change to FREE from VALID
|...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE,
# but map_set was not built again
|...-> rxe_mr_copy() # kernel crash due to access wild addresses
# that lookup from the map_set
The backtraces are not always identical.
[1st]----------
RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe]
Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75
RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000
RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004
RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04
R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038
R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000
FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe]
rxe_responder+0x12ee/0x1b60 [rdma_rxe]
? rxe_icrc_check+0x7e/0x100 [rdma_rxe]
? rxe_rcv+0x1d0/0x780 [rdma_rxe]
? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe]
rxe_do_task+0x67/0xb0 [rdma_rxe]
rxe_xmit_packet+0xc7/0x210 [rdma_rxe]
rxe_requester+0x680/0xee0 [rdma_rxe]
? update_load_avg+0x5f/0x690
? update_load_avg+0x5f/0x690
? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client]
[2nd]----------
RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe]
Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7
RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202
RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008
RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600
RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04
R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038
R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144
FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
rxe_responder+0x12ee/0x1b60 [rdma_rxe]
? rxe_icrc_check+0x7e/0x100 [rdma_rxe]
? rxe_rcv+0x1d0/0x780 [rdma_rxe]
? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe]
rxe_do_task+0x67/0xb0 [rdma_rxe]
rxe_xmit_packet+0xc7/0x210 [rdma_rxe]
rxe_requester+0x680/0xee0 [rdma_rxe]
? update_load_avg+0x5f/0x690
? update_load_avg+0x5f/0x690
? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client]
rxe_do_task+0x67/0xb0 [rdma_rxe]
tasklet_action_common.constprop.0+0x92/0xc0
__do_softirq+0xe1/0x2d8
run_ksoftirqd+0x21/0x30
smpboot_thread_fn+0x183/0x220
? sort_range+0x20/0x20
kthread+0xe2/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com
Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/
Link: https://www.spinics.net/lists/linux-rdma/msg110836.html
Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/
Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In rxe_req.c replace calls to __rxe_do_task() by calls to rxe_run_task(..,
0). Using __rxe_do_task is an error because the completer tasklet is not
designed to be re-entrant and __rxe_do_task() should only be called when
it is clear that no one else could be calling the completer tasklet as is
the case in rxe_qp.c where this call is used in safe environments.
Link: https://lore.kernel.org/r/20220630190425.2251-10-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Limit the maximum number of calls to each tasklet from rxe_do_task()
before yielding the cpu. When the limit is reached reschedule the tasklet
and exit the calling loop. This patch prevents one tasklet from consuming
100% of a cpu core and causing a deadlock or soft lockup.
Link: https://lore.kernel.org/r/20220630190425.2251-9-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Make changes to the three tasklets so that the exit logic from each is the
same. This makes the code easier to understand.
Link: https://lore.kernel.org/r/20220630190425.2251-8-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Currently the completer tasklet when retransmit timer or the rnr timer
fires the same flag (qp->req.need_retry) is set so that if either timer
fires it will attempt to perform a retry flow on the send queue. This has
the effect of responding to an RNR NAK at the first retransmit timer event
which might not allow the requested rnr timeout.
This patch adds a new flag (qp->req.wait_for_rnr_timer) which, if set,
prevents a retry flow until the rnr nak timer fires.
This patch fixes rnr retry errors which can be observed by running the
pyverbs test_rdmacm_async_traffic_external_qp multiple times. With this
patch applied they do not occur.
Link: https://lore.kernel.org/linux-rdma/a8287823-1408-4273-bc22-99a0678db640@gmail.com/
Link: https://lore.kernel.org/linux-rdma/2bafda9e-2bb6-186d-12a1-179e8f6a2678@talpey.com/
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220630190425.2251-6-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The code thc that decides whether to defer execution of a wqe in
rxe_requester.c is isolated into a subroutine rxe_is_fenced() and removed
from the call to req_next_wqe(). The condition whether a wqe should be
fenced is changed to comply with the IBA. Currently an operation is fenced
if the fence bit is set in the wqe flags and the last wqe has not
completed. For normal operations the IBA actually only requires that the
last read or atomic operation is complete.
Link: https://lore.kernel.org/r/20220630190425.2251-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The 'rkey' input can be an lkey or rkey, and in rxe the lkey or rkey have
the same value, including the variant bits.
So, if mr->rkey is set, compare the invalidate key with it, otherwise
compare with the mr->lkey.
Since we already did a lookup on the non-varient bits to get this far, the
check's only purpose is to confirm that the wqe has the correct variant
bits.
Fixes: 001345339f4c ("RDMA/rxe: Separate HW and SW l/rkeys")
Link: https://lore.kernel.org/r/20220707073006.328737-1-haris.phnx@gmail.com
Signed-off-by: Md Haris Iqbal <haris.phnx@gmail.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The current implementation of rxe_check_bind_mw() in rxe_mw.c is incorrect
since it requires the new key portion provided by the mw consumer to be
different than the previous key portion. This is not required by the
IBA. Remove the test.
Link: https://lore.kernel.org/linux-rdma/fb4614e7-4cac-0dc7-3ef7-766dfd10e8f2@gmail.com/
Fixes: 32a577b4c3a9 ("Add support for bind MW work requests")
Link: https://lore.kernel.org/r/20220714204619.13396-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There is a spelling mistake (writeable) in function rxe_check_bind_mw.
Fix it.
Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The qp parameter in free_rd_atomic_resource() has become
unused so remove it directly.
Fixes: 15ae1375ea91 ("RDMA/rxe: Fix qp reference counting for atomic ops")
Link: https://lore.kernel.org/all/20220708035547.6592-1-yangx.jy@fujitsu.com/
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
This parameter had been deprecated since below commit:
1a7085b34291 ("RDMA/rxe: Skip adjusting remote addr for write in retry operation")
Link: https://lore.kernel.org/r/20220715035340.1900168-1-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
It's better to use the unified naming format.
Link: https://lore.kernel.org/r/20220705145212.12014-2-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|