summaryrefslogtreecommitdiff
path: root/drivers/infiniband/ulp/iser
AgeCommit message (Collapse)Author
2015-02-17IB/iser: Fix memory regions possible leakSagi Grimberg
When teardown process starts during live IO, we need to keep the memory regions pool (frmr/fmr) until all in-flight tasks are properly released, since each task may return a memory region to the pool. In order to do this, we pass a destroy flag to iser_free_ib_conn_res to indicate we can destroy the device and the memory regions pool. iser_conn_release will pass it as true and also DEVICE_REMOVAL event (we need to let the device to properly remove). Also, Since we conditionally call iser_free_rx_descriptors, remove the extra check on iser_conn->rx_descs. Fixes: 5426b1711fd0 ("IB/iser: Collapse cleanup and disconnect handlers") Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-13IB/iser: Use correct dma direction when unmapping SGsRoi Dayan
We always unmap SGs with the same direction instead of unmapping with the direction the mapping was done, fix that. Fixes: 9a8b08fad2ef ("IB/iser: Generalize iser_unmap_task_data and [...]") Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/iser: Bump version to 1.5Or Gerlitz
Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/iser: DIX updateSagi Grimberg
Following few recent Block integrity updates, we align the iSER data integrity offload settings with: - Deprecate pi_guard module param - Expose support for DIX type 0. - Use scsi_transfer_length for the transfer length - Get pi_interval, ref_tag, ref_remap, bg_type and check_mask setting from scsi_cmnd Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/iser: Micro-optimize iser_handle_wcSagi Grimberg
Use likely() for wc.status == IB_WC_SUCCESS Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/iser: Micro-optimize iser loggingSagi Grimberg
And fix a checkpatch warning. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/iser: Use more completion queuesSagi Grimberg
No reason to settle with four, can use the min between device max comp vectors and number of cores. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/iser: Remove redundant is_mr indicatorSagi Grimberg
It is enough to check mem_h pointer assignment, mem_h == NULL will indicate that buffer is not registered using mr. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/iser: Centralize memory region invalidation to a functionSagi Grimberg
Eliminates code duplication. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/iser: Terminate connection before cleaning inflight tasksSagi Grimberg
When closing the connection, we should first terminate the connection (in case it was not previously terminated) to guarantee the QP is in error state and we are done with servicing IO. Only then go ahead with tasks cleanup via iscsi_conn_stop. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/iser: Fix race between iser connection teardown and scsi TMFsSagi Grimberg
In certain scenarios (target kill with live IO) scsi TMFs may race with iser RDMA teardown, which might cause NULL dereference on iser IB device handle (which might have been freed). In this case we take a conditional lock for TMFs and check the connection state (avoid introducing lock contention in the IO path). This is indeed best effort approach, but sufficient to survive multi targets sudden death while heavy IO is inflight. While we are on it, add a nice kernel-doc style documentation. Reported-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/iser: Fix possible NULL derefernce ib_conn->device in session_createAriel Nahum
If rdma_cm error event comes after ep_poll but before conn_bind, we should protect against dereferncing the device (which may have been terminated) in session_create and conn_create (already protected) callbacks. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/iser: Fix sparse warningsSagi Grimberg
Use uintptr_t to handle wr_id casting, which was found by Kbuild test robot and smatch. Also remove an internal definition of variable which potentially shadows an external one (and make sparse happy). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/iser: Fix possible SQ overflowMax Gurtovoy
Fix a regression was introduced in commit 6df5a128f0fd ("IB/iser: Suppress scsi command send completions"). The sig_count was wrongly set to be static variable, thus it is possible that we won't reach to (sig_count % ISER_SIGNAL_BATCH) == 0 condition (due to races) and the send queue will be overflowed. Instead keep sig_count per connection. We don't need it to be atomic as we are safe under the iscsi session frwd_lock taken by libiscsi on the queuecommand path. Fixes: 6df5a128f0fd ("IB/iser: Suppress scsi command send completions") Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/iser: Decrement CQ's active QPs accounting when QP creation failsSagi Grimberg
When creating a connection QP we choose the least used CQ and inc the number of active QPs on that. If we fail to create the QP, we need to decrement the active QPs counter. Reported-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/iser: Collapse cleanup and disconnect handlersAriel Nahum
No real need to wait for TIMEWAIT_EXIT before we destroy the RDMA resources (also TIMEAWAIT_EXIT is not guarenteed to always arrive). As for the cma_id, only destroy it if the state is not DOWN where in this case, conn_release is already running and we don't want to compete. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/iser: Fix catastrophic error flow hangSagi Grimberg
In case of the HCA going into catasrophic error flow, the beacon post_send is likely to fail, so surely there will be no completion for it. In this case, use a best effort approach and don't wait for beacon completion if we failed to post the send. Reported-by: Alex Tabachnik <alext@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/iser: Re-adjust CQ and QP send ring sizes to HW limitsMinh Tran
Re-adjust max CQEs per CQ and max send_wr per QP according to the resource limits supported by underlying hardware. Signed-off-by: Minh Tran <minhduc.tran@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Acked-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-11-24scsi: drop reason argument from ->change_queue_depthChristoph Hellwig
Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24scsi: avoid ->change_queue_depth indirection for queue full trackingChristoph Hellwig
All drivers use the implementation for ramping the queue up and down, so instead of overloading the change_queue_depth method call the implementation diretly if the driver opts into it by setting the track_queue_depth flag in the host template. Note that a few drivers validated the new queue depth in their change_queue_depth method, but as we never go over the queue depth set during slave_configure or the sysfs file this isn't nessecary and can safely be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
2014-10-09IB/mlx5, iser, isert: Add Signature API additionsSagi Grimberg
Expose more signature setting parameters. We modify the signature API to allow usage of some new execution parameters relevant to data integrity feature. This patch modifies ib_sig_domain structure by: - Deprecate DIF type in signature API (operation will be determined by the parameters alone, no DIF type awareness) - Add APPTAG check bitmask (for input domain) - Add REFTAG remap (increment) flag for each domain - Add APPTAG/REFTAG escape options for each domain The mlx5 driver is modified to follow the new parameters in HW signature setup. At the moment the callers (iser/isert) hard-code new parameters (by DIF type). In the future, callers will retrieve them from the scsi command structure. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Centralize ib_sig_domain settingsSagi Grimberg
Later there will be more parameters to set, so we want to do it in a centralized place. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Set IP_CSUM as default guard typeSagi Grimberg
In the future this will be a per-command parameter so we can lose it, but in the mean time IP_CSUM is a lot lighter for SW layers to compute, set it as default. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Remove redundant assignmentSagi Grimberg
We clear the struct before - no need to do 0 assignment. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Bump version, add maintainerOr Gerlitz
Update the driver version and add Sagi Grimberg as maintainer Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Fix/add kernel-doc style description in iscsi_iser.cSagi Grimberg
This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Add/Fix kernel doc style descriptions in iscsi_iser.hSagi Grimberg
- iser_hdr - iser_data_buf - iser_mem_reg - iser_regd_buf - iser_tx_desc - iser_rx_desc - iser_device - iser_pi_context - iser_conn - ib_conn - iser_comp - iscsi_iser_task - iser_global While we're at it, change nit alignments in this file This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Nit - add space after __func__ in iser loggingSagi Grimberg
Change logging: "iser:XXXX" to "iser: XXXX" Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Change iscsi_conn_stop log level to infoAriel Nahum
Match to the debug level of all functions in connect/disconnect flows. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Suppress scsi command send completionsSagi Grimberg
Singal completion of every 32 scsi commands and suppress all the rest. We don't do anything upon getting the completion so no need to "just consume" it. Cleanup of scsi command is done in cleanup_task callback. Still keep dataout and control send completions as we may need to cleanup there. This helps reducing the amount of interrupts/completions in the IO path. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Optimize completion pollingSagi Grimberg
Poll in batch of 16. Since we don't want it on the stack, keep under iser completion context (iser_comp). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Use beacon to indicate all completions were consumedSagi Grimberg
Avoid post_send counting (atomic) in the IO path just to keep track of how many completions we need to consume. Use a beacon post to indicate that all prior posts completed. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Use single CQ for RX and TXSagi Grimberg
This will solve a possible condition where we might miss TX completion (flush error) during session teardown. Since we are using a single CQ, we don't need to actively drain the TX CQ, instead just wait for flush_completion (when counters reach zero) and remove iser_poll_for_flush_errors(). This patch might introduce a minor performance regression on its own, but the next patches will enhance performance using a single CQ for RX and TX. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Use internal polling budget to avoid possible live-lockSagi Grimberg
We need a way to guarentee that we don't stay in soft-IRQ context for too long. We might starve other pending CQ tasklets or worse lock against application trying to issue IO on the running CPU. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Centralize iser completion contextsSagi Grimberg
Introduce iser_comp which centralizes all iser completion related items and is referenced by iser_device and each ib_conn. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Use iser_warn instead of BUG_ON in iser_conn_releaseAriel Nahum
In case iscsid was violently killed (SIGKILL) during its error recovery stage, we may never get a connection teardown sequence for some of the old connections. No harm done, but when we try to unload the module we will need to cleanup all these connections. So we actually may end-up here - so it's not a BUG_ON(), just give a relaxed warning that this happened and continue with normal unload. BUG_ON() will cause segfault on module_exit and we don't want that. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Signal iSCSI layer that transport is broken in error completionsSagi Grimberg
Previously we notified iscsi layer about the connection layer when we consumed all of our flush errors. This was racy as there was no guarentee that iscsi_conn wasn't terminated by then (which ends up in an invalid memory access). In case we got a non FLUSH error completion, we are guarenteed that iscsi_conn is still alive. We should notify iSCSI layer with iscsi_conn_failure to initiate error handling. While we are at it, add a nice kernel-doc style documentation. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Protect tasks cleanup in case IB device was already releasedSagi Grimberg
Bailout in case a task cleanup (iscsi_iser_cleanup_task) is called after the IB device was removed (DEVICE_REMOVAL CM event). We also call iscsi_conn_stop with a lock taken to prevent DEVICE_REMOVAL and tasks cleanup from racing. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Unbind at conn_stop stageAriel Nahum
Previously we didn't need to unbind the iser_conn and iscsi_conn since we always relied on iscsi daemon to teardown the connection and never let it finish before we cleanup all that is needed in iser. This is not the case anymore (for DEVICE_REMOVAL event). So avoid any possible chance we cause iscsi_conn dereference after iscsi_conn was freed. We also call iser_conn_terminate (safe to call multiple times) just for the corner case of iscsi daemon stopping an old connection before invoking endpoint removal (might happen if it was violently killed). Notice we are unbinding under a lock - which is required. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Don't bound release_work completions timeoutsSagi Grimberg
We no longer rely on iscsi connection teardown sequence, so no need to give a grace period and continue cleanup if it expired. Have iser_conn_release wait for full completion before freeing iser_conn. ib_completion: Guaranteed to come when: - Got DISCONNECTED/ADDR_CHANGE event or - iSCSI called ep_disconnect/conn_stop Guaranteed to finish when: - Got TIMEWAIT_EXIT/DEVICE_REMOVAL event - All Flush errors are consumed - IB related resources are destroyed stop_completion: Guaranteed to come when: - iSCSI calls conn_stop Guaranteed to finish when: - All inflight tasks were cleaned up Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Fix DEVICE REMOVAL handling in the absence of iscsi daemonSagi Grimberg
iscsi daemon is in user-space, thus we can't rely on it to be invoked at connection teardown (if not running or does not receive CPU time). This patch addresses the issue by re-structuring iSER connection teardown logic and CM events handling. The CM events will dictate the RDMA resources destruction (ib_conn) and iser_conn is kept around as long as iscsi_conn is left around allowing iscsi/iser callbacks to continue after RDMA transport was destroyed. This patch introduces a separation in logic when handling CM events: - DISCONNECTED_HANDLER, ADDR_CHANGED This events indicate the start of teardown process. Actions: 1. Terminate the connection: rdma_disconnect (send DREQ/DREP) 2. Notify iSCSI of connection failure 3. Change state to TERMINATING 4. Poll for all flush errors to be consumed - TIMEWAIT_EXIT, DEVICE_REMOVAL These events indicate the final stage of termination process and we can free RDMA related resources. Actions: 1. Call disconnected handler (we are not guaranteed that DISCONNECTED event was invoked in the past) 2. Cleanup RDMA related resources 3. For DEVICE_REMOVAL return non-zero rc from cma_handler to implicitly destroy the cm_id (Can't rely on user-space, make sure we have forward progress) We replace flush_completion (indicate all flushes were consumed) with ib_completion (rdma resources were cleaned up). The iser_conn_release_work will wait for teardown completions: - conn_stop was completed (tasks were cleaned-up) - stop_completion - RDMA resources were destroyed - ib_completion And then will continue to free iser connection representation (iser_conn). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Extend iser_free_ib_conn_res()Sagi Grimberg
Put all connection IB related resources release in this routine. One exception is the cm_id which cannot be destroyed as the routine is protected by the state mutex. Also move its position to avoid forward declaration. While at it fix qp NULL assignment. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Remove unused variables and dead codeRoi Dayan
Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Re-introduce ib_connSagi Grimberg
Structure that describes the RDMA relates connection objects. Static member of iser_conn. This patch does not change any functionality Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Rename ib_conn -> iser_connSagi Grimberg
Two reasons why we choose to do this: 1. No point today calling struct iser_conn by another name ib_conn 2. In the next patches we will restructure iser control plane representation - struct iser_conn: connection logical representation - struct ib_conn: connection RDMA layout representation This patch does not change any functionality. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/iser: Bump version to 1.4.1Or Gerlitz
Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/iser: Allow bind only when connection state is UPSagi Grimberg
We need to fail the bind operation if the iser connection state != UP (started teardown) and this should be done under the state lock. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/iser: Fix RX/TX CQ resource leak on error flowRoi Dayan
When failing to allocate TX CQ we already allocated RX CQ, so we need to make sure we release it. Also, when failing to register notification to the RX CQ we currently leak both RX and TX CQs of the current index, fix that too. Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01IB/iser: Clarify a duplicate counters checkRoi Dayan
This is to prevent someone from thinking that this code section is redundant. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01IB/iser: Replace connection waitqueue with completion objectAriel Nahum
Instead of waiting for events and condition changes of the iser connection state, we wait for explicit completion of connection establishment and teardown. Separate connection establishment wait object from the teardown object to avoid a situation where racing connection establishment and teardown may concurrently wakeup each other. ep_poll will wait for up_completion invoked by iser_connected_handler() and iser release worker will wait for flush_completion before releasing the connection. Bound the completion wait with a 30 seconds timeout for cases where iscsid (the user space iscsi daemon) is too slow or gone. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit (git 2.34.1) at 2025-07-18 17:54:22 +0000