summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2025-04-20RDMA/cma: Remove unused rdma_res_to_idDr. David Alan Gilbert
The last use of rdma_res_to_id() was removed in 2020 by commi t211cd9459fda ("RDMA: Add dedicated CM_ID resource tracker function") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://patch.msgid.link/20250418165848.241305-1-linux@treblig.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-04-20ice, irdma: fix an off by one in error handling codeDan Carpenter
If we don't allocate the MIN number of IRQs then we need to free what we have and return -ENOMEM. The problem is this loop is off by one so it frees an entry that wasn't allocated and it doesn't free the first entry where i == 0. Fixes: 3e0d3cb3fbe0 ("ice, irdma: move interrupts code to irdma") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Link: https://patch.msgid.link/20250414234231.523-2-tatyana.e.nikolova@intel.com Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-04-20irdma: free iwdev->rf after removing MSI-XMichal Swiatkowski
Currently iwdev->rf is allocated in irdma_probe(), but free in irdma_ib_dealloc_device(). It can be misleading. Move the free to irdma_remove() to be more obvious. Freeing in irdma_ib_dealloc_device() leads to KASAN use-after-free issue. Which can also lead to NULL pointer dereference. Fix this. irdma_deinit_interrupts() can't be moved before freeing iwdef->rf, because in this case deinit interrupts will be done before freeing irqs. The simplest solution is to move kfree(iwdev->rf) to irdma_remove(). Reproducer: sudo rmmod irdma Minified splat(s): BUG: KASAN: use-after-free in irdma_remove+0x257/0x2d0 [irdma] Call Trace: <TASK> ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? kfree+0x253/0x450 ? irdma_remove+0x257/0x2d0 [irdma] kasan_report+0xed/0x120 ? irdma_remove+0x257/0x2d0 [irdma] irdma_remove+0x257/0x2d0 [irdma] auxiliary_bus_remove+0x56/0x80 device_release_driver_internal+0x371/0x530 ? kernfs_put.part.0+0x147/0x310 driver_detach+0xbf/0x180 bus_remove_driver+0x11b/0x2a0 auxiliary_driver_unregister+0x1a/0x50 irdma_exit_module+0x40/0x4c [irdma] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:ice_free_rdma_qvector+0x2a/0xa0 [ice] Call Trace: ? ice_free_rdma_qvector+0x2a/0xa0 [ice] irdma_remove+0x179/0x2d0 [irdma] auxiliary_bus_remove+0x56/0x80 device_release_driver_internal+0x371/0x530 ? kobject_put+0x61/0x4b0 driver_detach+0xbf/0x180 bus_remove_driver+0x11b/0x2a0 auxiliary_driver_unregister+0x1a/0x50 irdma_exit_module+0x40/0x4c [irdma] Reported-by: Marcin Szycik <marcin.szycik@linux.intel.com> Closes: https://lore.kernel.org/netdev/8e533834-4564-472f-b29b-4f1cb7730053@linux.intel.com/ Fixes: 3e0d3cb3fbe0 ("ice, irdma: move interrupts code to irdma") Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Link: https://patch.msgid.link/20250414234231.523-1-tatyana.e.nikolova@intel.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-04-20RDMA/mana_ib: Add support of 4M, 1G, and 2G pagesKonstantin Taranov
Check PF capability flag whether the 4M, 1G, and 2G pages are supported. Add these pages sizes to mana_ib, if supported. Define possible page sizes in enum gdma_page_type and remove unused enum atb_page_size. Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com> Link: https://patch.msgid.link/1744621234-26114-4-git-send-email-kotaranov@linux.microsoft.com Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-04-20RDMA/mana_ib: support of the zero based MRsKonstantin Taranov
Add IB_ZERO_BASED to the valid flags and use the corresponding MR creation request for the zero based memory. Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com> Link: https://patch.msgid.link/1744621234-26114-3-git-send-email-kotaranov@linux.microsoft.com Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-04-20RDMA/mana_ib: Access remote atomic for MRsKonstantin Taranov
Add IB_ACCESS_REMOTE_ATOMIC to the valid flags for MRs and use the corresponding flag bit during MR creation in the HW. Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com> Link: https://patch.msgid.link/1744621234-26114-2-git-send-email-kotaranov@linux.microsoft.com Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-04-20RDMA/rxe: Fix slab-use-after-free Read in rxe_queue_cleanup bugZhu Yanjun
Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x7d/0xa0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcf/0x610 mm/kasan/report.c:489 kasan_report+0xb5/0xe0 mm/kasan/report.c:602 rxe_queue_cleanup+0xd0/0xe0 drivers/infiniband/sw/rxe/rxe_queue.c:195 rxe_cq_cleanup+0x3f/0x50 drivers/infiniband/sw/rxe/rxe_cq.c:132 __rxe_cleanup+0x168/0x300 drivers/infiniband/sw/rxe/rxe_pool.c:232 rxe_create_cq+0x22e/0x3a0 drivers/infiniband/sw/rxe/rxe_verbs.c:1109 create_cq+0x658/0xb90 drivers/infiniband/core/uverbs_cmd.c:1052 ib_uverbs_create_cq+0xc7/0x120 drivers/infiniband/core/uverbs_cmd.c:1095 ib_uverbs_write+0x969/0xc90 drivers/infiniband/core/uverbs_main.c:679 vfs_write fs/read_write.c:677 [inline] vfs_write+0x26a/0xcc0 fs/read_write.c:659 ksys_write+0x1b8/0x200 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xaa/0x1b0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f In the function rxe_create_cq, when rxe_cq_from_init fails, the function rxe_cleanup will be called to handle the allocated resources. In fact, some memory resources have already been freed in the function rxe_cq_from_init. Thus, this problem will occur. The solution is to let rxe_cleanup do all the work. Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://paste.ubuntu.com/p/tJgC42wDf6/ Tested-by: liuyi <liuy22@mails.tsinghua.edu.cn> Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev> Link: https://patch.msgid.link/20250412075714.3257358-1-yanjun.zhu@linux.dev Reviewed-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-04-11RDMA/hns: initialize db in update_srq_db()Chen Linxuan
On x86_64 with gcc version 13.3.0, I compile drivers/infiniband/hw/hns/hns_roce_hw_v2.c with: make defconfig ./scripts/kconfig/merge_config.sh .config <( echo CONFIG_COMPILE_TEST=y echo CONFIG_HNS3=m echo CONFIG_INFINIBAND=m echo CONFIG_INFINIBAND_HNS_HIP08=m ) make KCFLAGS="-fno-inline-small-functions -fno-inline-functions-called-once" \ drivers/infiniband/hw/hns/hns_roce_hw_v2.o Then I get a compile error: CALL scripts/checksyscalls.sh DESCEND objtool INSTALL libsubcmd_headers CC [M] drivers/infiniband/hw/hns/hns_roce_hw_v2.o In file included from drivers/infiniband/hw/hns/hns_roce_hw_v2.c:47: drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function 'update_srq_db': drivers/infiniband/hw/hns/hns_roce_common.h:74:17: error: 'db' is used uninitialized [-Werror=uninitialized] 74 | *((__le32 *)_ptr + (field_h) / 32) &= \ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/hns/hns_roce_common.h:90:17: note: in expansion of macro '_hr_reg_clear' 90 | _hr_reg_clear(ptr, field_type, field_h, field_l); \ | ^~~~~~~~~~~~~ drivers/infiniband/hw/hns/hns_roce_common.h:95:39: note: in expansion of macro '_hr_reg_write' 95 | #define hr_reg_write(ptr, field, val) _hr_reg_write(ptr, field, val) | ^~~~~~~~~~~~~ drivers/infiniband/hw/hns/hns_roce_hw_v2.c:948:9: note: in expansion of macro 'hr_reg_write' 948 | hr_reg_write(&db, DB_TAG, srq->srqn); | ^~~~~~~~~~~~ drivers/infiniband/hw/hns/hns_roce_hw_v2.c:946:31: note: 'db' declared here 946 | struct hns_roce_v2_db db; | ^~ cc1: all warnings being treated as errors Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com> Co-developed-by: Winston Wen <wentao@uniontech.com> Signed-off-by: Winston Wen <wentao@uniontech.com> Link: https://patch.msgid.link/FF922C77946229B6+20250411105459.90782-5-chenlinxuan@uniontech.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-04-11RDMA/rxe: Fix mismatched type declarationsDaisuke Matsuda
Some functions return int values while they are defined as enum resp_states variables. This patch resolves the mismatches in rxe. Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com> Link: https://patch.msgid.link/20250409102701.1275265-1-matsuda-daisuke@fujitsu.com Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-04-10RDMA/bnxt_re: Remove unusable nq variableLeon Romanovsky
Remove nq variable from bnxt_re_create_srq() and bnxt_re_destroy_srq() as it generates the following compilation warnings: >> drivers/infiniband/hw/bnxt_re/ib_verbs.c:1777:24: warning: variable 'nq' set but not used [-Wunused-but-set-variable] 1777 | struct bnxt_qplib_nq *nq = NULL; | ^ drivers/infiniband/hw/bnxt_re/ib_verbs.c:1828:24: warning: variable 'nq' set but not used [-Wunused-but-set-variable] 1828 | struct bnxt_qplib_nq *nq = NULL; | ^ 2 warnings generated. Fixes: 6b395d31146a ("RDMA/bnxt_re: Fix budget handling of notification queue") Link: https://patch.msgid.link/r/8a4343e217d7d1c0a5a786b785c4ac57cb72a2a0.1744288299.git.leonro@nvidia.com Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202504091055.CzgXnk4C-lkp@intel.com/ Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-04-09RDMA/core: Silence oversized kvmalloc() warningShay Drory
syzkaller triggered an oversized kvmalloc() warning. Silence it by adding __GFP_NOWARN. syzkaller log: WARNING: CPU: 7 PID: 518 at mm/util.c:665 __kvmalloc_node_noprof+0x175/0x180 CPU: 7 UID: 0 PID: 518 Comm: c_repro Not tainted 6.11.0-rc6+ #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:__kvmalloc_node_noprof+0x175/0x180 RSP: 0018:ffffc90001e67c10 EFLAGS: 00010246 RAX: 0000000000000100 RBX: 0000000000000400 RCX: ffffffff8149d46b RDX: 0000000000000000 RSI: ffff8881030fae80 RDI: 0000000000000002 RBP: 000000712c800000 R08: 0000000000000100 R09: 0000000000000000 R10: ffffc90001e67c10 R11: 0030ae0601000000 R12: 0000000000000000 R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 FS: 00007fde79159740(0000) GS:ffff88813bdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 0000000105eb4005 CR4: 00000000003706b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ib_umem_odp_get+0x1f6/0x390 mlx5_ib_reg_user_mr+0x1e8/0x450 ib_uverbs_reg_mr+0x28b/0x440 ib_uverbs_write+0x7d3/0xa30 vfs_write+0x1ac/0x6c0 ksys_write+0x134/0x170 ? __sanitizer_cov_trace_pc+0x1c/0x50 do_syscall_64+0x50/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fixes: 37824952dc8f ("RDMA/odp: Use kvcalloc for the dma_list and page_list") Signed-off-by: Shay Drory <shayd@nvidia.com> Link: https://patch.msgid.link/c6cb92379de668be94894f49c2cfa40e73f94d56.1742388096.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-04-09RDMA: Don't use %pK through printkThomas Weißschuh
In the past %pK was preferable to %p as it would not leak raw pointer values into the kernel log. Since commit ad67b74d2469 ("printk: hash addresses printed with %p") the regular %p has been improved to avoid this issue. Furthermore, restricted pointers ("%pK") were never meant to be used through printk(). They can still unintentionally leak raw pointers or acquire sleeping looks in atomic contexts. Switch to the regular pointer formatting which is safer and easier to reason about. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Link: https://patch.msgid.link/20250407-restricted-pointers-infiniband-v1-1-22b20504b84d@linutronix.de Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-04-09RDMA/rxe: Enable ODP in ATOMIC WRITE operationDaisuke Matsuda
Add rxe_odp_do_atomic_write() so that ODP specific steps are applied to ATOMIC WRITE requests. Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com> Link: https://patch.msgid.link/20250324075649.3313968-3-matsuda-daisuke@fujitsu.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-04-09RDMA/cma: Fix workqueue crash in cma_netevent_work_handlerSharath Srinivasan
struct rdma_cm_id has member "struct work_struct net_work" that is reused for enqueuing cma_netevent_work_handler()s onto cma_wq. Below crash[1] can occur if more than one call to cma_netevent_callback() occurs in quick succession, which further enqueues cma_netevent_work_handler()s for the same rdma_cm_id, overwriting any previously queued work-item(s) that was just scheduled to run i.e. there is no guarantee the queued work item may run between two successive calls to cma_netevent_callback() and the 2nd INIT_WORK would overwrite the 1st work item (for the same rdma_cm_id), despite grabbing id_table_lock during enqueue. Also drgn analysis [2] indicates the work item was likely overwritten. Fix this by moving the INIT_WORK() to __rdma_create_id(), so that it doesn't race with any existing queue_work() or its worker thread. [1] Trimmed crash stack: ============================================= BUG: kernel NULL pointer dereference, address: 0000000000000008 kworker/u256:6 ... 6.12.0-0... Workqueue: cma_netevent_work_handler [rdma_cm] (rdma_cm) RIP: 0010:process_one_work+0xba/0x31a Call Trace: worker_thread+0x266/0x3a0 kthread+0xcf/0x100 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1a/0x30 ============================================= [2] drgn crash analysis: >>> trace = prog.crashed_thread().stack_trace() >>> trace (0) crash_setup_regs (./arch/x86/include/asm/kexec.h:111:15) (1) __crash_kexec (kernel/crash_core.c:122:4) (2) panic (kernel/panic.c:399:3) (3) oops_end (arch/x86/kernel/dumpstack.c:382:3) ... (8) process_one_work (kernel/workqueue.c:3168:2) (9) process_scheduled_works (kernel/workqueue.c:3310:3) (10) worker_thread (kernel/workqueue.c:3391:4) (11) kthread (kernel/kthread.c:389:9) Line workqueue.c:3168 for this kernel version is in process_one_work(): 3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN); >>> trace[8]["work"] *(struct work_struct *)0xffff92577d0a21d8 = { .data = (atomic_long_t){ .counter = (s64)536870912, <=== Note }, .entry = (struct list_head){ .next = (struct list_head *)0xffff924d075924c0, .prev = (struct list_head *)0xffff924d075924c0, }, .func = (work_func_t)cma_netevent_work_handler+0x0 = 0xffffffffc2cec280, } Suspicion is that pwq is NULL: >>> trace[8]["pwq"] (struct pool_workqueue *)<absent> In process_one_work(), pwq is assigned from: struct pool_workqueue *pwq = get_work_pwq(work); and get_work_pwq() is: static struct pool_workqueue *get_work_pwq(struct work_struct *work) { unsigned long data = atomic_long_read(&work->data); if (data & WORK_STRUCT_PWQ) return work_struct_pwq(data); else return NULL; } WORK_STRUCT_PWQ is 0x4: >>> print(repr(prog['WORK_STRUCT_PWQ'])) Object(prog, 'enum work_flags', value=4) But work->data is 536870912 which is 0x20000000. So, get_work_pwq() returns NULL and we crash in process_one_work(): 3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN); ============================================= Fixes: 925d046e7e52 ("RDMA/core: Add a netevent notifier to cma") Cc: stable@vger.kernel.org Co-developed-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Sharath Srinivasan <sharath.srinivasan@oracle.com> Reviewed-by: Patrisious Haddad <phaddad@nvidia.com> Link: https://patch.msgid.link/bf0082f9-5b25-4593-92c6-d130aa8ba439@oracle.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-04-08RDMA/rxe: Enable ODP in RDMA FLUSH operationDaisuke Matsuda
For persistent memories, add rxe_odp_flush_pmem_iova() so that ODP specific steps are executed. Otherwise, no additional consideration is required. Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com> Link: https://patch.msgid.link/20250324075649.3313968-2-matsuda-daisuke@fujitsu.com Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-04-08VFS: rename lookup_one_len family to lookup_noperm and remove permission checkNeilBrown
The lookup_one_len family of functions is (now) only used internally by a filesystem on itself either - in a context where permission checking is irrelevant such as by a virtual filesystem populating itself, or xfs accessing its ORPHANAGE or dquota accessing the quota file; or - in a context where a permission check (MAY_EXEC on the parent) has just been performed such as a network filesystem finding in "silly-rename" file in the same directory. This is also the context after the _parentat() functions where currently lookup_one_qstr_excl() is used. So the permission check is pointless. The name "one_len" is unhelpful in understanding the purpose of these functions and should be changed. Most of the callers pass the len as "strlen()" so using a qstr and QSTR() can simplify the code. This patch renames these functions (include lookup_positive_unlocked() which is part of the family despite the name) to have a name based on "lookup_noperm". They are changed to receive a 'struct qstr' instead of separate name and len. In a few cases the use of QSTR() results in a new call to strlen(). try_lookup_noperm() takes a pointer to a qstr instead of the whole qstr. This is consistent with d_hash_and_lookup() (which is nearly identical) and useful for lookup_noperm_unlocked(). The new lookup_noperm_common() doesn't take a qstr yet. That will be tidied up in a subsequent patch. Signed-off-by: NeilBrown <neil@brown.name> Link: https://lore.kernel.org/r/20250319031545.2999807-5-neil@brown.name Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-04-07IB/cm: use rwlock for MAD agent lockJacob Moroni
In workloads where there are many processes establishing connections using RDMA CM in parallel (large scale MPI), there can be heavy contention for mad_agent_lock in cm_alloc_msg. This contention can occur while inside of a spin_lock_irq region, leading to interrupts being disabled for extended durations on many cores. Furthermore, it leads to the serialization of rdma_create_ah calls, which has negative performance impacts for NICs which are capable of processing multiple address handle creations in parallel. The end result is the machine becoming unresponsive, hung task warnings, netdev TX timeouts, etc. Since the lock appears to be only for protection from cm_remove_one, it can be changed to a rwlock to resolve these issues. Reproducer: Server: for i in $(seq 1 512); do ucmatose -c 32 -p $((i + 5000)) & done Client: for i in $(seq 1 512); do ucmatose -c 32 -p $((i + 5000)) -s 10.2.0.52 & done Fixes: 76039ac9095f ("IB/cm: Protect cm_dev, cm_ports and mad_agent with kref and lock") Link: https://patch.msgid.link/r/20250220175612.2763122-1-jmoroni@google.com Signed-off-by: Jacob Moroni <jmoroni@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-04-07RDMA/hns: Fix wrong maximum DMA segment sizeChengchang Tang
Set maximum DMA segment size to 2G instead of UINT_MAX due to HW limit. Fixes: e0477b34d9d1 ("RDMA: Explicitly pass in the dma_device to ib_register_device") Link: https://patch.msgid.link/r/20250327114724.3454268-3-huangjunxian6@hisilicon.com Signed-off-by: Chengchang Tang <tangchengchang@huawei.com> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-04-07RDMA/hns: Remove unused parametersChengchang Tang
Remove unused parameters. Link: https://patch.msgid.link/r/20250327114724.3454268-2-huangjunxian6@hisilicon.com Signed-off-by: Chengchang Tang <tangchengchang@huawei.com> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-04-07RDMA/rxe: Fix null pointer dereference in ODP MR checkLi Zhijian
The blktests/rnbd reported a null pointer dereference as following. Similar to the mlx5, introduce a is_odp_mr() to check if the odp is enabled in this mr. Workqueue: rxe_wq do_work [rdma_rxe] RIP: 0010:rxe_mr_copy+0x57/0x210 [rdma_rxe] Code: 7c 04 48 89 f3 48 89 d5 41 89 cf 45 89 c4 0f 84 dc 00 00 00 89 ca e8 f8 f8 ff ff 85 c0 0f 85 75 01 00 00 49 8b 86 f0 00 00 00 <f6> 40 28 02 0f 85 98 01 00 00 41 8b 46 78 41 8b 8e 10 01 00 00 8d RSP: 0018:ffffa0aac02cfcf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9079cd440024 RCX: 0000000000000000 RDX: 000000000000003c RSI: ffff9079cd440060 RDI: ffff9079cd665600 RBP: ffff9079c0e5e45a R08: 0000000000000000 R09: 0000000000000000 R10: 000000003c000000 R11: 0000000000225510 R12: 0000000000000000 R13: 0000000000000000 R14: ffff9079cd665600 R15: 000000000000003c FS: 0000000000000000(0000) GS:ffff907ccfa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000119498001 CR4: 00000000001726f0 Call Trace: <TASK> ? __die_body+0x1e/0x60 ? page_fault_oops+0x14f/0x4c0 ? rxe_mr_copy+0x57/0x210 [rdma_rxe] ? search_bpf_extables+0x5f/0x80 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? rxe_mr_copy+0x57/0x210 [rdma_rxe] ? rxe_mr_copy+0x48/0x210 [rdma_rxe] ? rxe_pool_get_index+0x50/0x90 [rdma_rxe] rxe_receiver+0x1d98/0x2530 [rdma_rxe] ? psi_task_switch+0x1ff/0x250 ? finish_task_switch+0x92/0x2d0 ? __schedule+0xbdf/0x17c0 do_task+0x65/0x1e0 [rdma_rxe] process_scheduled_works+0xaa/0x3f0 worker_thread+0x117/0x240 Fixes: d03fb5c6599e ("RDMA/rxe: Allow registering MRs for On-Demand Paging") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/r/20250402032657.1762800-1-lizhijian@fujitsu.com Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-04-07RDMA/mlx5: Fix compilation warning when USER_ACCESS isn't setMark Bloch
The cited commit made fs.c always compile, even when INFINIBAND_USER_ACCESS isn't set. This results in a compilation warning about an unused object when compiling with W=1 and USER_ACCESS is unset. Fix this by defining uverbs_destroy_def_handler() even when USER_ACCESS isn't set. Fixes: 36e0d433672f ("RDMA/mlx5: Compile fs.c regardless of INFINIBAND_USER_ACCESS config") Link: https://patch.msgid.link/r/20250402070944.1022093-1-mbloch@nvidia.com Signed-off-by: Mark Bloch <mbloch@nvidia.com> Tested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-04-07IB/hfi1: Avoid -Wflex-array-member-not-at-end warningGustavo A. R. Silva
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. Remove unused flex-array member `class_data` from `struct opa_mad_notice_attr`. Fix the following warning: drivers/infiniband/hw/hfi1/mad.c:23:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Link: https://patch.msgid.link/r/Z-wiYkll8Vo3ME3P@kspp Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-04-07RDMA/core: Convert to use ERR_CAST()Li Haoran
As opposed to open-code, using the ERR_CAST macro clearly indicates that this is a pointer to an error value and a type conversion was performed. Link: https://patch.msgid.link/r/20250401211015750qxOfU9XZ8QgKizM1Lcyq2@zte.com.cn Signed-off-by: Li Haoran <li.haoran7@zte.com.cn> Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-04-07RDMA/uverbs: Convert to use ERR_CAST()Li Haoran
As opposed to open-code, using the ERR_CAST macro clearly indicates that this is a pointer to an error value and a type conversion was performed. Link: https://patch.msgid.link/r/202504012109233981_YPVbd4wQzmAzP3tA5IG@zte.com.cn Signed-off-by: Li Haoran <li.haoran7@zte.com.cn> Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-04-07RDMA/core: Convert to use ERR_CAST()Li Haoran
As opposed to open-code, using the ERR_CAST macro clearly indicates that this is a pointer to an error value and a type conversion was performed. Link: https://patch.msgid.link/r/20250401210840146_IyrV3zlejzz3eAnDmMSB@zte.com.cn Signed-off-by: Li Haoran <li.haoran7@zte.com.cn> Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-04-07RDMA/usnic: Fix passing zero to PTR_ERR in usnic_ib_pci_probe()Yue Haibing
drivers/infiniband/hw/usnic/usnic_ib_main.c:590 usnic_ib_pci_probe() warn: passing zero to 'PTR_ERR' Make usnic_ib_device_add() return NULL on fail path, also remove useless NULL check for usnic_ib_discover_pf() Fixes: e3cf00d0a87f ("IB/usnic: Add Cisco VIC low-level hardware driver") Link: https://patch.msgid.link/r/20250324123132.2392077-1-yuehaibing@huawei.com Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-04-07RDMA: Replace msecs_to_jiffies with secs_to_jiffies for timeoutPeng Jiang
In drivers/infiniband/hw/mlx4/mcg.c and drivers/infiniband/hw/mlx5/mr.c, `msecs_to_jiffies` is used to convert milliseconds to jiffies. For constant milliseconds, using `msecs_to_jiffies` introduces additional computational overhead. For example, it is unnecessary to check if m > jiffies_to_msecs(MAX_JIFFY_OFFSET) or (int)m < 0 for constants, while using `secs_to_jiffies` can avoid these extra calculations. Link: https://patch.msgid.link/r/20250326221955611qu6Ix3Pt5WgKvhL6sTySX@zte.com.cn Signed-off-by: Peng Jiang <jiang.peng9@zte.com.cn> Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-04-07RDMA/mlx5: convert timeouts to secs_to_jiffies()Easwar Hariharan
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced secs_to_jiffies(). As the value here is a multiple of 1000, use secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication. This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with the following Coccinelle rules: @depends on patch@ expression E; @@ -msecs_to_jiffies(E * 1000) +secs_to_jiffies(E) -msecs_to_jiffies(E * MSEC_PER_SEC) +secs_to_jiffies(E) Link: https://patch.msgid.link/r/20250219-rdma-secs-to-jiffies-v1-2-b506746561a9@linux.microsoft.com Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-04-07RDMA/ucaps: Avoid format-security warningArnd Bergmann
Passing a non-literal format string to dev_set_name causes a warning: drivers/infiniband/core/ucaps.c:173:33: error: format string is not a string literal (potentially insecure) [-Werror,-Wformat-security] 173 | ret = dev_set_name(&ucap->dev, ucap_names[type]); | ^~~~~~~~~~~~~~~~ drivers/infiniband/core/ucaps.c:173:33: note: treat the string as an argument to avoid this 173 | ret = dev_set_name(&ucap->dev, ucap_names[type]); | ^ | "%s", Turn the name into the %s argument as suggested by gcc. Fixes: 61e51682816d ("RDMA/uverbs: Introduce UCAP (User CAPabilities) API") Link: https://patch.msgid.link/r/20250314155721.264083-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-04-07RDMA/bnxt_re: Fix budget handling of notification queueKashyap Desai
The cited commit in Fixes tag introduced a bug which can cause hang of completion queue processing because of notification queue budget goes to zero. Found while doing nfs over rdma mount and umount. Below message is noticed because of the existing bug. kernel: cm_destroy_id_wait_timeout: cm_id=00000000ff6c6cc6 timed out. state 11 -> 0, refcnt=1 Fix to handle this issue - Driver will not change nq->budget upon create and destroy of cq and srq rdma resources. Fixes: cb97b377a135 ("RDMA/bnxt_re: Refurbish CQ to NQ hash calculation") Link: https://patch.msgid.link/r/20250324040935.90182-1-kalesh-anakkur.purayil@broadcom.com Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-04-03Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull dcache fixes from Al Viro: "Fixes for bugs caught as part of tree-in-dcache work. Mostly dentry refcount mishandling" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: hypfs_create_cpu_files(): add missing check for hypfs_mkdir() failure qibfs: fix _another_ leak spufs: fix a leak in spufs_create_context() spufs: fix gang directory lifetimes spufs: fix a leak on spufs_new_file() failure
2025-04-01Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - The series "powerpc/crash: use generic crashkernel reservation" from Sourabh Jain changes powerpc's kexec code to use more of the generic layers. - The series "get_maintainer: report subsystem status separately" from Vlastimil Babka makes some long-requested improvements to the get_maintainer output. - The series "ucount: Simplify refcounting with rcuref_t" from Sebastian Siewior cleans up and optimizing the refcounting in the ucount code. - The series "reboot: support runtime configuration of emergency hw_protection action" from Ahmad Fatoum improves the ability for a driver to perform an emergency system shutdown or reboot. - The series "Converge on using secs_to_jiffies() part two" from Easwar Hariharan performs further migrations from msecs_to_jiffies() to secs_to_jiffies(). - The series "lib/interval_tree: add some test cases and cleanup" from Wei Yang permits more userspace testing of kernel library code, adds some more tests and performs some cleanups. - The series "hung_task: Dump the blocking task stacktrace" from Masami Hiramatsu arranges for the hung_task detector to dump the stack of the blocking task and not just that of the blocked task. - The series "resource: Split and use DEFINE_RES*() macros" from Andy Shevchenko provides some cleanups to the resource definition macros. - Plus the usual shower of singleton patches - please see the individual changelogs for details. * tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits) mailmap: consolidate email addresses of Alexander Sverdlin fs/procfs: fix the comment above proc_pid_wchan() relay: use kasprintf() instead of fixed buffer formatting resource: replace open coded variant of DEFINE_RES() resource: replace open coded variants of DEFINE_RES_*_NAMED() resource: replace open coded variant of DEFINE_RES_NAMED_DESC() resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED() samples: add hung_task detector mutex blocking sample hung_task: show the blocker task if the task is hung on mutex kexec_core: accept unaccepted kexec segments' destination addresses watchdog/perf: optimize bytes copied and remove manual NUL-termination lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap() lib/interval_tree: skip the check before go to the right subtree lib/interval_tree: add test case for span iteration lib/interval_tree: add test case for interval_tree_iter_xxx() helpers lib/rbtree: add random seed lib/rbtree: split tests lib/rbtree: enable userland test suite for rbtree related data structure checkpatch: describe --min-conf-desc-length scripts/gdb/symbols: determine KASLR offset on s390 ...
2025-03-29Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: - Usual minor updates and fixes for bnxt_re, hfi1, rxe, mana, iser, mlx5, vmw_pvrdma, hns - Make rxe work on tun devices - mana gains more standard verbs as it moves toward supporting in-kernel verbs - DMABUF support for mana - Fix page size calculations when memory registration exceeds 4G - On Demand Paging support for rxe - mlx5 support for RDMA TRANSPORT flow tables and a new ucap mechanism to access control use of them - Optional RDMA_TX/RX counters per QP in mlx5 * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (73 commits) IB/mad: Check available slots before posting receive WRs RDMA/mana_ib: Fix integer overflow during queue creation RDMA/mlx5: Fix calculation of total invalidated pages RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow RDMA/mlx5: Fix page_size variable overflow RDMA/mlx5: Drop access_flags from _mlx5_mr_cache_alloc() RDMA/mlx5: Fix cache entry update on dereg error RDMA/mlx5: Fix MR cache initialization error flow RDMA/mlx5: Support optional-counters binding for QPs RDMA/mlx5: Compile fs.c regardless of INFINIBAND_USER_ACCESS config RDMA/core: Pass port to counter bind/unbind operations RDMA/core: Add support to optional-counters binding configuration RDMA/core: Create and destroy rdma_counter using rdma_zalloc_drv_obj() RDMA/mlx5: Add optional counters for RDMA_TX/RX_packets/bytes RDMA/core: Fix use-after-free when rename device name RDMA/bnxt_re: Support perf management counters RDMA/rxe: Fix incorrect return value of rxe_odp_atomic_op() RDMA/uverbs: Propagate errors from rdma_lookup_get_uobject() RDMA/mana_ib: Handle net event for pointing to the current netdev net: mana: Change the function signature of mana_get_primary_netdev_rcu ...
2025-03-26Merge tag 'net-next-6.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Continue Netlink conversions to per-namespace RTNL lock (IPv4 routing, routing rules, routing next hops, ARP ioctls) - Continue extending the use of netdev instance locks. As a driver opt-in protect queue operations and (in due course) ethtool operations with the instance lock and not RTNL lock. - Support collecting TCP timestamps (data submitted, sent, acked) in BPF, allowing for transparent (to the application) and lower overhead tracking of TCP RPC performance. - Tweak existing networking Rx zero-copy infra to support zero-copy Rx via io_uring. - Optimize MPTCP performance in single subflow mode by 29%. - Enable GRO on packets which went thru XDP CPU redirect (were queued for processing on a different CPU). Improving TCP stream performance up to 2x. - Improve performance of contended connect() by 200% by searching for an available 4-tuple under RCU rather than a spin lock. Bring an additional 229% improvement by tweaking hash distribution. - Avoid unconditionally touching sk_tsflags on RX, improving performance under UDP flood by as much as 10%. - Avoid skb_clone() dance in ping_rcv() to improve performance under ping flood. - Avoid FIB lookup in netfilter if socket is available, 20% perf win. - Rework network device creation (in-kernel) API to more clearly identify network namespaces and their roles. There are up to 4 namespace roles but we used to have just 2 netns pointer arguments, interpreted differently based on context. - Use sysfs_break_active_protection() instead of trylock to avoid deadlocks between unregistering objects and sysfs access. - Add a new sysctl and sockopt for capping max retransmit timeout in TCP. - Support masking port and DSCP in routing rule matches. - Support dumping IPv4 multicast addresses with RTM_GETMULTICAST. - Support specifying at what time packet should be sent on AF_XDP sockets. - Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users. - Add Netlink YAML spec for WiFi (nl80211) and conntrack. - Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols which only need to be exported when IPv6 support is built as a module. - Age FDB entries based on Rx not Tx traffic in VxLAN, similar to normal bridging. - Allow users to specify source port range for GENEVE tunnels. - netconsole: allow attaching kernel release, CPU ID and task name to messages as metadata Driver API: - Continue rework / fixing of Energy Efficient Ethernet (EEE) across the SW layers. Delegate the responsibilities to phylink where possible. Improve its handling in phylib. - Support symmetric OR-XOR RSS hashing algorithm. - Support tracking and preserving IRQ affinity by NAPI itself. - Support loopback mode speed selection for interface selftests. Device drivers: - Remove the IBM LCS driver for s390 - Remove the sb1000 cable modem driver - Add support for SFP module access over SMBus - Add MCTP transport driver for MCTP-over-USB - Enable XDP metadata support in multiple drivers - Ethernet high-speed NICs: - Broadcom (bnxt): - add PCIe TLP Processing Hints (TPH) support for new AMD platforms - support dumping RoCE queue state for debug - opt into instance locking - Intel (100G, ice, idpf): - ice: rework MSI-X IRQ management and distribution - ice: support for E830 devices - iavf: add support for Rx timestamping - iavf: opt into instance locking - nVidia/Mellanox: - mlx4: use page pool memory allocator for Rx - mlx5: support for one PTP device per hardware clock - mlx5: support for 200Gbps per-lane link modes - mlx5: move IPSec policy check after decryption - AMD/Solarflare: - support FW flashing via devlink - Cisco (enic): - use page pool memory allocator for Rx - enable 32, 64 byte CQEs - get max rx/tx ring size from the device - Meta (fbnic): - support flow steering and RSS configuration - report queue stats - support TCP segmentation - support IRQ coalescing - support ring size configuration - Marvell/Cavium: - support AF_XDP - Wangxun: - support for PTP clock and timestamping - Huawei (hibmcge): - checksum offload - add more statistics - Ethernet virtual: - VirtIO net: - aggressively suppress Tx completions, improve perf by 96% with 1 CPU and 55% with 2 CPUs - expose NAPI to IRQ mapping and persist NAPI settings - Google (gve): - support XDP in DQO RDA Queue Format - opt into instance locking - Microsoft vNIC: - support BIG TCP - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - cleanup Tx and Tx clock setting and other link-focused cleanups - enable SGMII and 2500BASEX mode switching for Intel platforms - support Sophgo SG2044 - Broadcom switches (b53): - support for BCM53101 - TI: - iep: add perout configuration support - icssg: support XDP - Cadence (macb): - implement BQL - Xilinx (axinet): - support dynamic IRQ moderation and changing coalescing at runtime - implement BQL - report standard stats - MediaTek: - support phylink managed EEE - Intel: - igc: don't restart the interface on every XDP program change - RealTek (r8169): - support reading registers of internal PHYs directly - increase max jumbo packet size on RTL8125/RTL8126 - Airoha: - support for RISC-V NPU packet processing unit - enable scatter-gather and support MTU up to 9kB - Tehuti (tn40xx): - support cards with TN4010 MAC and an Aquantia AQR105 PHY - Ethernet PHYs: - support for TJA1102S, TJA1121 - dp83tg720: add randomized polling intervals for link detection - dp83822: support changing the transmit amplitude voltage - support for LEDs on 88q2xxx - CAN: - canxl: support Remote Request Substitution bit access - flexcan: add S32G2/S32G3 SoC - WiFi: - remove cooked monitor support - strict mode for better AP testing - basic EPCS support - OMI RX bandwidth reduction support - batman-adv: add support for jumbo frames - WiFi drivers: - RealTek (rtw88): - support RTL8814AE and RTL8814AU - RealTek (rtw89): - switch using wiphy_lock and wiphy_work - add BB context to manipulate two PHY as preparation of MLO - improve BT-coexistence mechanism to play A2DP smoothly - Intel (iwlwifi): - add new iwlmld sub-driver for latest HW/FW combinations - MediaTek (mt76): - preparation for mt7996 Multi-Link Operation (MLO) support - Qualcomm/Atheros (ath12k): - continued work on MLO - Silabs (wfx): - Wake-on-WLAN support - Bluetooth: - add support for skb TX SND/COMPLETION timestamping - hci_core: enable buffer flow control for SCO/eSCO - coredump: log devcd dumps into the monitor - Bluetooth drivers: - intel: add support to configure TX power - nxp: handle bootloader error during cmd5 and cmd7" * tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits) unix: fix up for "apparmor: add fine grained af_unix mediation" mctp: Fix incorrect tx flow invalidation condition in mctp-i2c net: usb: asix: ax88772: Increase phy_name size net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string net: libwx: fix Tx L4 checksum net: libwx: fix Tx descriptor content for some tunnel packets atm: Fix NULL pointer dereference net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus net: phy: aquantia: add essential functions to aqr105 driver net: phy: aquantia: search for firmware-name in fwnode net: phy: aquantia: add probe function to aqr105 for firmware loading net: phy: Add swnode support to mdiobus_scan gve: add XDP DROP and PASS support for DQ gve: update XDP allocation path support RX buffer posting gve: merge packet buffer size fields gve: update GQ RX to use buf_size gve: introduce config-based allocation for XDP gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics ...
2025-03-25Merge tag 'crc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux Pull CRC updates from Eric Biggers: "Another set of improvements to the kernel's CRC (cyclic redundancy check) code: - Rework the CRC64 library functions to be directly optimized, like what I did last cycle for the CRC32 and CRC-T10DIF library functions - Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ support and acceleration for crc64_be and crc64_nvme - Rewrite the riscv Zbc-optimized CRC code, and add acceleration for crc_t10dif, crc64_be, and crc64_nvme - Remove crc_t10dif and crc64_rocksoft from the crypto API, since they are no longer needed there - Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect - Add kunit test cases for crc64_nvme and crc7 - Eliminate redundant functions for calculating the Castagnoli CRC32, settling on just crc32c() - Remove unnecessary prompts from some of the CRC kconfig options - Further optimize the x86 crc32c code" * tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits) x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512 lib/crc: remove unnecessary prompt for CONFIG_CRC64 lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C lib/crc: remove unnecessary prompt for CONFIG_CRC8 lib/crc: remove unnecessary prompt for CONFIG_CRC7 lib/crc: remove unnecessary prompt for CONFIG_CRC4 lib/crc7: unexport crc7_be_syndrome_table lib/crc_kunit.c: update comment in crc_benchmark() lib/crc_kunit.c: add test and benchmark for crc7_be() x86/crc32: optimize tail handling for crc32c short inputs riscv/crc64: add Zbc optimized CRC64 functions riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function riscv/crc32: reimplement the CRC32 functions using new template riscv/crc: add "template" for Zbc optimized CRC functions x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings x86/crc32: improve crc32c_arch() code generation with clang x86/crc64: implement crc64_be and crc64_nvme using new template x86/crc-t10dif: implement crc_t10dif using new template x86/crc32: implement crc32_le using new template x86/crc: add "template" for [V]PCLMULQDQ based CRC functions ...
2025-03-25Merge tag 'timers-cleanups-2025-03-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A treewide hrtimer timer cleanup hrtimers are initialized with hrtimer_init() and a subsequent store to the callback pointer. This turned out to be suboptimal for the upcoming Rust integration and is obviously a silly implementation to begin with. This cleanup replaces the hrtimer_init(T); T->function = cb; sequence with hrtimer_setup(T, cb); The conversion was done with Coccinelle and a few manual fixups. Once the conversion has completely landed in mainline, hrtimer_init() will be removed and the hrtimer::function becomes a private member" * tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits) wifi: rt2x00: Switch to use hrtimer_update_function() io_uring: Use helper function hrtimer_update_function() serial: xilinx_uartps: Use helper function hrtimer_update_function() ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup() RDMA: Switch to use hrtimer_setup() virtio: mem: Switch to use hrtimer_setup() drm/vmwgfx: Switch to use hrtimer_setup() drm/xe/oa: Switch to use hrtimer_setup() drm/vkms: Switch to use hrtimer_setup() drm/msm: Switch to use hrtimer_setup() drm/i915/request: Switch to use hrtimer_setup() drm/i915/uncore: Switch to use hrtimer_setup() drm/i915/pmu: Switch to use hrtimer_setup() drm/i915/perf: Switch to use hrtimer_setup() drm/i915/gvt: Switch to use hrtimer_setup() drm/i915/huc: Switch to use hrtimer_setup() drm/amdgpu: Switch to use hrtimer_setup() stm class: heartbeat: Switch to use hrtimer_setup() i2c: Switch to use hrtimer_setup() iio: Switch to use hrtimer_setup() ...
2025-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR (net-6.14-rc8). Conflict: tools/testing/selftests/net/Makefile 03544faad761 ("selftest: net: add proc_net_pktgen") 3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops") tools/testing/selftests/net/config: 85cb3711acb8 ("selftests: net: Add test cases for link and peer netns") 3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops") Adjacent commits: tools/testing/selftests/net/Makefile c935af429ec2 ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY") 355d940f4d5a ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-19IB/mad: Check available slots before posting receive WRsMaher Sanalla
The ib_post_receive_mads() function handles posting receive work requests (WRs) to MAD QPs and is called in two cases: 1) When a MAD port is opened. 2) When a receive WQE is consumed upon receiving a new MAD. Whereas, if MADs arrive during the port open phase, a race condition might cause an extra WR to be posted, exceeding the QP’s capacity. This leads to failures such as: infiniband mlx5_0: ib_post_recv failed: -12 infiniband mlx5_0: Couldn't post receive WRs infiniband mlx5_0: Couldn't start port infiniband mlx5_0: Couldn't open port 1 Fix this by checking the current receive count before posting a new WR. If the QP’s receive queue is full, do not post additional WRs. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Link: https://patch.msgid.link/c4984ba3c3a98a5711a558bccefcad789587ecf1.1741875592.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-19RDMA/mana_ib: Fix integer overflow during queue creationKonstantin Taranov
Check queue size during CQ creation for users to prevent overflow of u32. Fixes: bec127e45d9f ("RDMA/mana_ib: create kernel-level CQs") Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com> Link: https://patch.msgid.link/1742312744-14370-1-git-send-email-kotaranov@linux.microsoft.com Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-18RDMA/mlx5: Fix calculation of total invalidated pagesChiara Meiohas
When invalidating an address range in mlx5, there is an optimization to do UMR operations in chunks. Previously, the invalidation counter was incorrectly updated for the same indexes within a chunk. Now, the invalidation counter is updated only when a chunk is complete and mlx5r_umr_update_xlt() is called. This ensures that the counter accurately represents the number of pages invalidated using UMR. Fixes: a3de94e3d61e ("IB/mlx5: Introduce ODP diagnostic counters") Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/560deb2433318e5947282b070c915f3c81fef77f.1741875692.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-18RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flowPatrisious Haddad
When cur_qp isn't NULL, in order to avoid fetching the QP from the radix tree again we check if the next cqe QP is identical to the one we already have. The bug however is that we are checking if the QP is identical by checking the QP number inside the CQE against the QP number inside the mlx5_ib_qp, but that's wrong since the QP number from the CQE is from FW so it should be matched against mlx5_core_qp which is our FW QP number. Otherwise we could use the wrong QP when handling a CQE which could cause the kernel trace below. This issue is mainly noticeable over QPs 0 & 1, since for now they are the only QPs in our driver whereas the QP number inside mlx5_ib_qp doesn't match the QP number inside mlx5_core_qp. BUG: kernel NULL pointer dereference, address: 0000000000000012 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP CPU: 0 UID: 0 PID: 7927 Comm: kworker/u62:1 Not tainted 6.14.0-rc3+ #189 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] RIP: 0010:mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib] Code: 03 00 00 8d 58 ff 21 cb 66 39 d3 74 39 48 c7 c7 3c 89 6e a0 0f b7 db e8 b7 d2 b3 e0 49 8b 86 60 03 00 00 48 c7 c7 4a 89 6e a0 <0f> b7 5c 98 02 e8 9f d2 b3 e0 41 0f b7 86 78 03 00 00 83 e8 01 21 RSP: 0018:ffff88810511bd60 EFLAGS: 00010046 RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88885fa1b3c0 RDI: ffffffffa06e894a RBP: 00000000000000b0 R08: 0000000000000000 R09: ffff88810511bc10 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88810d593000 R13: ffff88810e579108 R14: ffff888105146000 R15: 00000000000000b0 FS: 0000000000000000(0000) GS:ffff88885fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000012 CR3: 00000001077e6001 CR4: 0000000000370eb0 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib] __ib_process_cq+0x5a/0x150 [ib_core] ib_cq_poll_work+0x31/0x90 [ib_core] process_one_work+0x169/0x320 worker_thread+0x288/0x3a0 ? work_busy+0xb0/0xb0 kthread+0xd7/0x1f0 ? kthreads_online_cpu+0x130/0x130 ? kthreads_online_cpu+0x130/0x130 ret_from_fork+0x2d/0x50 ? kthreads_online_cpu+0x130/0x130 ret_from_fork_asm+0x11/0x20 </TASK> Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Edward Srouji <edwards@nvidia.com> Link: https://patch.msgid.link/4ada09d41f1e36db62c44a9b25c209ea5f054316.1741875692.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-18RDMA/mlx5: Fix page_size variable overflowMichael Guralnik
Change all variables storing mlx5_umem_mkc_find_best_pgsz() result to unsigned long to support values larger than 31 and avoid overflow. For example: If we try to register 4GB of memory that is contiguous in physical memory, the driver will optimize the page_size and try to use an mkey with 4GB entity size. The 'unsigned int' page_size variable will overflow to '0' and we'll hit the WARN_ON() in alloc_cacheable_mr(). WARNING: CPU: 2 PID: 1203 at drivers/infiniband/hw/mlx5/mr.c:1124 alloc_cacheable_mr+0x22/0x580 [mlx5_ib] Modules linked in: mlx5_ib mlx5_core bonding ip6_gre ip6_tunnel tunnel6 ip_gre gre rdma_rxe rdma_ucm ib_uverbs ib_ipoib ib_umad rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm fuse ib_core [last unloaded: mlx5_core] CPU: 2 UID: 70878 PID: 1203 Comm: rdma_resource_l Tainted: G W 6.14.0-rc4-dirty #43 Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:alloc_cacheable_mr+0x22/0x580 [mlx5_ib] Code: 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 41 52 53 48 83 ec 30 f6 46 28 04 4c 8b 77 08 75 21 <0f> 0b 49 c7 c2 ea ff ff ff 48 8d 65 d0 4c 89 d0 5b 41 5a 41 5c 41 RSP: 0018:ffffc900006ffac8 EFLAGS: 00010246 RAX: 0000000004c0d0d0 RBX: ffff888217a22000 RCX: 0000000000100001 RDX: 00007fb7ac480000 RSI: ffff8882037b1240 RDI: ffff8882046f0600 RBP: ffffc900006ffb28 R08: 0000000000000001 R09: 0000000000000000 R10: 00000000000007e0 R11: ffffea0008011d40 R12: ffff8882037b1240 R13: ffff8882046f0600 R14: ffff888217a22000 R15: ffffc900006ffe00 FS: 00007fb7ed013340(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb7ed1d8000 CR3: 00000001fd8f6006 CR4: 0000000000772eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x81/0x130 ? alloc_cacheable_mr+0x22/0x580 [mlx5_ib] ? report_bug+0xfc/0x1e0 ? handle_bug+0x55/0x90 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? alloc_cacheable_mr+0x22/0x580 [mlx5_ib] create_real_mr+0x54/0x150 [mlx5_ib] ib_uverbs_reg_mr+0x17f/0x2a0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xca/0x140 [ib_uverbs] ib_uverbs_run_method+0x6d0/0x780 [ib_uverbs] ? __pfx_ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x10/0x10 [ib_uverbs] ib_uverbs_cmd_verbs+0x19b/0x360 [ib_uverbs] ? walk_system_ram_range+0x79/0xd0 ? ___pte_offset_map+0x1b/0x110 ? __pte_offset_map_lock+0x80/0x100 ib_uverbs_ioctl+0xac/0x110 [ib_uverbs] __x64_sys_ioctl+0x94/0xb0 do_syscall_64+0x50/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fb7ecf0737b Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 2a 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffdbe03ecc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffdbe03edb8 RCX: 00007fb7ecf0737b RDX: 00007ffdbe03eda0 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffdbe03ed80 R08: 00007fb7ecc84010 R09: 00007ffdbe03eed4 R10: 0000000000000009 R11: 0000000000000246 R12: 00007ffdbe03eed4 R13: 000000000000000c R14: 000000000000000c R15: 00007fb7ecc84150 </TASK> Fixes: cef7dde8836a ("net/mlx5: Expand mkey page size to support 6 bits") Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Reviewed-by: Yishai Hadas <yishaih@nvidia.com> Link: https://patch.msgid.link/2479a4a3f6fd9bd032e1b6d396274a89c4c5e22f.1741875692.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-18RDMA/mlx5: Drop access_flags from _mlx5_mr_cache_alloc()Michael Guralnik
Drop the unused access_flags parameter. Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Reviewed-by: Yishai Hadas <yishaih@nvidia.com> Link: https://patch.msgid.link/4d769c51eb012c62b3a92fd916b7886c25b56fbf.1741875692.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-18RDMA/mlx5: Fix cache entry update on dereg errorMichael Guralnik
Fix double decrement of 'in_use' counter on push_mkey_locked() failure while deregistering an MR. If we fail to return an mkey to the cache in cache_ent_find_and_store() it'll update the 'in_use' counter. Its caller, revoke_mr(), also updates it, thus having double decrement. Wrong value of 'in_use' counter will be exposed through debugfs and can also cause wrong resizing of the cache when users try to set cache entry size using the 'size' debugfs. To address this issue, the 'in_use' counter is now decremented within mlx5_revoke_mr() also after a successful call to cache_ent_find_and_store() and not within cache_ent_find_and_store(). Other success or failure flows remains unchanged where it was also decremented. Fixes: 8c1185fef68c ("RDMA/mlx5: Change check for cacheable mkeys") Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Reviewed-by: Yishai Hadas <yishaih@nvidia.com> Link: https://patch.msgid.link/97e979dff636f232ff4c83ce709c17c727da1fdb.1741875692.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-18RDMA/mlx5: Fix MR cache initialization error flowMichael Guralnik
Destroy all previously created cache entries and work queue when rolling back the MR cache initialization upon an error. Fixes: 73d09b2fe833 ("RDMA/mlx5: Introduce mlx5r_cache_rb_key") Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Reviewed-by: Yishai Hadas <yishaih@nvidia.com> Link: https://patch.msgid.link/c41d525fb3c72e28dd38511bf3aaccb5d584063e.1741875692.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-18RDMA/mlx5: Support optional-counters binding for QPsPatrisious Haddad
Add support to allow optional-counters binding to a QP, whereas when a bind operation is requested depending on the counter optional-counter binding state the driver will determine if to also add optional-counters to this QP binding. The optional-counter binding is done by simply adding a steering rule for the specific optional-counter condition with the additional match over that QP number. Note that optional-counters per QP rules are handled on an earlier prio than per device counters, and per device counter correctness is maintained by core whereas it is responsible to sum active counters when checking device counter and to add them to history count when they are deallocated. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/2cad1b891a6641ae61fe8d92f867e1059121813a.1741875070.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-18RDMA/mlx5: Compile fs.c regardless of INFINIBAND_USER_ACCESS configPatrisious Haddad
Change mlx5 Makefile, fs.c and fs.h to support fs compilation regardless of INFINIBAND_USER_ACCESS config. In addition allow optional counters support regardless of the config. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Link: https://patch.msgid.link/b8dd220456a91538b22c3aff150ab021d7b9e1bf.1741875070.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-18RDMA/core: Pass port to counter bind/unbind operationsPatrisious Haddad
This will be useful for the next patches in the series since port number is needed for optional counters binding and unbinding. Note that this change is needed since when the operation is done qp->port isn't necessarily initialized yet and can't be used. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/b6f6797844acbd517358e8d2a270ea9b3e6ecba1.1741875070.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-18RDMA/core: Add support to optional-counters binding configurationPatrisious Haddad
Whenever a new counter is created, save inside it the user requested configuration for optional-counters binding, for manual configuration it is requested directly by the user and for the automatic configuration it depends on if the automatic binding was enabled with or without optional-counters binding. This argument will later be used by the driver to determine if to bind the optional-counters as well or not when trying to bind this counter to a QP. It indicates that when binding counters to a QP we also want the currently enabled link optional-counters to be bound as well. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/82f1c357606a16932979ef9a5910122675c74a3a.1741875070.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-16 02:19:25 +0000