| Age | Commit message (Collapse) | Author |
|---|
|
Commit <d74169ceb0d2> ("iommu/vt-d: Allocate DMAR fault interrupts
locally") moved the call to enable_drhd_fault_handling() to a code
path that does not hold any lock while traversing the drhd list. Fix
it by ensuring the dmar_global_lock lock is held when traversing the
drhd list.
Without this fix, the following warning is triggered:
=============================
WARNING: suspicious RCU usage
6.14.0-rc3 #55 Not tainted
-----------------------------
drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
2 locks held by cpuhp/1/23:
#0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
#1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
stack backtrace:
CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 #55
Call Trace:
<TASK>
dump_stack_lvl+0xb7/0xd0
lockdep_rcu_suspicious+0x159/0x1f0
? __pfx_enable_drhd_fault_handling+0x10/0x10
enable_drhd_fault_handling+0x151/0x180
cpuhp_invoke_callback+0x1df/0x990
cpuhp_thread_fun+0x1ea/0x2c0
smpboot_thread_fn+0x1f5/0x2e0
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0x12a/0x2d0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x4a/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat
about a possible deadlock between dmar_global_lock and cpu_hotplug_lock.
This is avoided by not holding dmar_global_lock when calling
iommu_device_register(), which initiates the device probe process.
Fixes: d74169ceb0d2 ("iommu/vt-d: Allocate DMAR fault interrupts locally")
Reported-and-tested-by: Ido Schimmel <idosch@nvidia.com>
Closes: https://lore.kernel.org/linux-iommu/Zx9OwdLIc_VoQ0-a@shredder.mtl.com/
Tested-by: Breno Leitao <leitao@debian.org>
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250218022422.2315082-1-baolu.lu@linux.intel.com
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Remove the device comparison check in context_setup_pass_through_cb.
pci_for_each_dma_alias already makes a decision on whether the
callback function should be called for a device. With the check
in place it will fail to create context entries for aliases as
it walks up to the root bus.
Fixes: 2031c469f816 ("iommu/vt-d: Add support for static identity domain")
Closes: https://lore.kernel.org/linux-iommu/82499eb6-00b7-4f83-879a-e97b4144f576@linux.intel.com/
Cc: stable@vger.kernel.org
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20250224180316.140123-1-jsnitsel@redhat.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When updating the page table root field on the DTE, avoid overwriting any
bits that are already set. The earlier call to make_clear_dte() writes
default values that all DTEs must have set (currently DTE[V]), and those
must be preserved.
Currently this doesn't cause problems since the page table root update is
the first field that is set after make_clear_dte() is called, and
DTE_FLAG_V is set again later along with the permission bits (IR/IW).
Remove this redundant assignment too.
Fixes: fd5dff9de4be ("iommu/amd: Modify set_dte_entry() to use 256-bit DTE helpers")
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250106191413.3107140-1-alejandro.j.jimenez@oracle.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
|
|
Fix issues with enabling SNP host support and effectively SNP support
which is broken with respect to the KVM module being built-in.
SNP host support is enabled in snp_rmptable_init() which is invoked as
device_initcall(). SNP check on IOMMU is done during IOMMU PCI init
(IOMMU_PCI_INIT stage). And for that reason snp_rmptable_init() is
currently invoked via device_initcall() and cannot be invoked via
subsys_initcall() as core IOMMU subsystem gets initialized via
subsys_initcall().
Now, if kvm_amd module is built-in, it gets initialized before SNP host
support is enabled in snp_rmptable_init() :
[ 10.131811] kvm_amd: TSC scaling supported
[ 10.136384] kvm_amd: Nested Virtualization enabled
[ 10.141734] kvm_amd: Nested Paging enabled
[ 10.146304] kvm_amd: LBR virtualization supported
[ 10.151557] kvm_amd: SEV enabled (ASIDs 100 - 509)
[ 10.156905] kvm_amd: SEV-ES enabled (ASIDs 1 - 99)
[ 10.162256] kvm_amd: SEV-SNP enabled (ASIDs 1 - 99)
[ 10.171508] kvm_amd: Virtual VMLOAD VMSAVE supported
[ 10.177052] kvm_amd: Virtual GIF supported
...
...
[ 10.201648] kvm_amd: in svm_enable_virtualization_cpu
And then svm_x86_ops->enable_virtualization_cpu()
(svm_enable_virtualization_cpu) programs MSR_VM_HSAVE_PA as following:
wrmsrl(MSR_VM_HSAVE_PA, sd->save_area_pa);
So VM_HSAVE_PA is non-zero before SNP support is enabled on all CPUs.
snp_rmptable_init() gets invoked after svm_enable_virtualization_cpu()
as following :
...
[ 11.256138] kvm_amd: in svm_enable_virtualization_cpu
...
[ 11.264918] SEV-SNP: in snp_rmptable_init
This triggers a #GP exception in snp_rmptable_init() when snp_enable()
is invoked to set SNP_EN in SYSCFG MSR:
[ 11.294289] unchecked MSR access error: WRMSR to 0xc0010010 (tried to write 0x0000000003fc0000) at rIP: 0xffffffffaf5d5c28 (native_write_msr+0x8/0x30)
...
[ 11.294404] Call Trace:
[ 11.294482] <IRQ>
[ 11.294513] ? show_stack_regs+0x26/0x30
[ 11.294522] ? ex_handler_msr+0x10f/0x180
[ 11.294529] ? search_extable+0x2b/0x40
[ 11.294538] ? fixup_exception+0x2dd/0x340
[ 11.294542] ? exc_general_protection+0x14f/0x440
[ 11.294550] ? asm_exc_general_protection+0x2b/0x30
[ 11.294557] ? __pfx_snp_enable+0x10/0x10
[ 11.294567] ? native_write_msr+0x8/0x30
[ 11.294570] ? __snp_enable+0x5d/0x70
[ 11.294575] snp_enable+0x19/0x20
[ 11.294578] __flush_smp_call_function_queue+0x9c/0x3a0
[ 11.294586] generic_smp_call_function_single_interrupt+0x17/0x20
[ 11.294589] __sysvec_call_function+0x20/0x90
[ 11.294596] sysvec_call_function+0x80/0xb0
[ 11.294601] </IRQ>
[ 11.294603] <TASK>
[ 11.294605] asm_sysvec_call_function+0x1f/0x30
...
[ 11.294631] arch_cpu_idle+0xd/0x20
[ 11.294633] default_idle_call+0x34/0xd0
[ 11.294636] do_idle+0x1f1/0x230
[ 11.294643] ? complete+0x71/0x80
[ 11.294649] cpu_startup_entry+0x30/0x40
[ 11.294652] start_secondary+0x12d/0x160
[ 11.294655] common_startup_64+0x13e/0x141
[ 11.294662] </TASK>
This #GP exception is getting triggered due to the following errata for
AMD family 19h Models 10h-1Fh Processors:
Processor may generate spurious #GP(0) Exception on WRMSR instruction:
Description:
The Processor will generate a spurious #GP(0) Exception on a WRMSR
instruction if the following conditions are all met:
- the target of the WRMSR is a SYSCFG register.
- the write changes the value of SYSCFG.SNPEn from 0 to 1.
- One of the threads that share the physical core has a non-zero
value in the VM_HSAVE_PA MSR.
The document being referred to above:
https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/revision-guides/57095-PUB_1_01.pdf
To summarize, with kvm_amd module being built-in, KVM/SVM initialization
happens before host SNP is enabled and this SVM initialization
sets VM_HSAVE_PA to non-zero, which then triggers a #GP when
SYSCFG.SNPEn is being set and this will subsequently cause
SNP_INIT(_EX) to fail with INVALID_CONFIG error as SYSCFG[SnpEn] is not
set on all CPUs.
Essentially SNP host enabling code should be invoked before KVM
initialization, which is currently not the case when KVM is built-in.
Add fix to call snp_rmptable_init() early from iommu_snp_enable()
directly and not invoked via device_initcall() which enables SNP host
support before KVM initialization with kvm_amd module built-in.
Add additional handling for `iommu=off` or `amd_iommu=off` options.
Note that IOMMUs need to be enabled for SNP initialization, therefore,
if host SNP support is enabled but late IOMMU initialization fails
then that will cause PSP driver's SNP_INIT to fail as IOMMU SNP sanity
checks in SNP firmware will fail with invalid configuration error as
below:
[ 9.723114] ccp 0000:23:00.1: sev enabled
[ 9.727602] ccp 0000:23:00.1: psp enabled
[ 9.732527] ccp 0000:a2:00.1: enabling device (0000 -> 0002)
[ 9.739098] ccp 0000:a2:00.1: no command queues available
[ 9.745167] ccp 0000:a2:00.1: psp enabled
[ 9.805337] ccp 0000:23:00.1: SEV-SNP: failed to INIT rc -5, error 0x3
[ 9.866426] ccp 0000:23:00.1: SEV API:1.53 build:5
Fixes: c3b86e61b756 ("x86/cpufeatures: Enable/unmask SEV-SNP CPU feature")
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Message-ID: <138b520fb83964782303b43ade4369cd181fdd9c.1739226950.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This driver supports page faults on PCI RID since commit <9f831c16c69e>
("iommu/vt-d: Remove the pasid present check in prq_event_thread") by
allowing the reporting of page faults with the pasid_present field cleared
to the upper layer for further handling. The fundamental assumption here
is that the detach or replace operations act as a fence for page faults.
This implies that all pending page faults associated with a specific RID
or PASID are flushed when a domain is detached or replaced from a device
RID or PASID.
However, the intel_iommu_drain_pasid_prq() helper does not correctly
handle faults for RID. This leads to faults potentially remaining pending
in the iommu hardware queue even after the domain is detached, thereby
violating the aforementioned assumption.
Fix this issue by extending intel_iommu_drain_pasid_prq() to cover faults
for RID.
Fixes: 9f831c16c69e ("iommu/vt-d: Remove the pasid present check in prq_event_thread")
Cc: stable@vger.kernel.org
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250121023150.815972-1-baolu.lu@linux.intel.com
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20250211005512.985563-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There are some typos in comments/messages:
- modyfying -> modifying
- Unabled -> Unable
Fix them via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Link: https://lore.kernel.org/r/20250210112027.29791-1-algonell@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Fix spelling error IDENITY -> IDENTITY in
drivers/iommu/iommu.c.
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250128190522.70800-1-eahariha@linux.microsoft.com
[ joro: Add commit message ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
With recent kernel, AMDGPU failed to resume after suspend on certain laptop.
Sample log:
-----------
Nov 14 11:52:19 Thinkbook kernel: iommu ivhd0: AMD-Vi: Event logged [ILLEGAL_DEV_TABLE_ENTRY device=0000:06:00.0 pasid=0x00000 address=0x135300000 flags=0x0080]
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[0]: 7d90000000000003
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[1]: 0000100103fc0009
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[2]: 2000000117840013
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[3]: 0000000000000000
This is because in resume path, CNTRL[EPHEn] is not set. Fix this by
setting CNTRL[EPHEn] to 1 in resume path if EFR[EPHSUP] is set.
Note
May be better approach is to save the control register in suspend path
and restore it in resume path instead of trying to set indivisual
bits. We will have separate patch for that.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219499
Fixes: c4cb23111103 ("iommu/amd: Add support for enable/disable IOPF")
Tested-by: Hamish McIntyre-Bhatty <kernel-bugzilla@regd.hamishmb.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250127094411.5931-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The iopf_queue_remove_device() helper removes a device from the per-iommu
iopf queue when PRI is disabled on the device. It responds to all
outstanding iopf's with an IOMMU_PAGE_RESP_INVALID code and detaches the
device from the queue.
However, it fails to release the group structure that represents a group
of iopf's awaiting for a response after responding to the hardware. This
can cause a memory leak if iopf_queue_remove_device() is called with
pending iopf's.
Fix it by calling iopf_free_group() after the iopf group is responded.
Fixes: 199112327135 ("iommu: Track iopf group instead of last fault")
Cc: stable@vger.kernel.org
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250117055800.782462-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Introduce a new set of Hyper-V headers in include/hyperv and replace
the old hyperv-tlfs.h with the new headers (Nuno Das Neves)
- Fixes for the Hyper-V VTL mode (Roman Kisel)
- Fixes for cpu mask usage in Hyper-V code (Michael Kelley)
- Document the guest VM hibernation behaviour (Michael Kelley)
- Miscellaneous fixes and cleanups (Jacob Pan, John Starks, Naman Jain)
* tag 'hyperv-next-signed-20250123' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Documentation: hyperv: Add overview of guest VM hibernation
hyperv: Do not overlap the hvcall IO areas in hv_vtl_apicid_to_vp_id()
hyperv: Do not overlap the hvcall IO areas in get_vtl()
hyperv: Enable the hypercall output page for the VTL mode
hv_balloon: Fallback to generic_online_page() for non-HV hot added mem
Drivers: hv: vmbus: Log on missing offers if any
Drivers: hv: vmbus: Wait for boot-time offers during boot and resume
uio_hv_generic: Add a check for HV_NIC for send, receive buffers setup
iommu/hyper-v: Don't assume cpu_possible_mask is dense
Drivers: hv: Don't assume cpu_possible_mask is dense
x86/hyperv: Don't assume cpu_possible_mask is dense
hyperv: Remove the now unused hyperv-tlfs.h files
hyperv: Switch from hyperv-tlfs.h to hyperv/hvhdk.h
hyperv: Add new Hyper-V headers in include/hyperv
hyperv: Clean up unnecessary #includes
hyperv: Move hv_connection_id to hyperv-tlfs.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"No major functionality this cycle:
- iommufd part of the domain_alloc_paging_flags() conversion
- Move IOMMU_HWPT_FAULT_ID_VALID processing out of drivers
- Increase a timeout waiting for other threads to drop transient
refcounts that syzkaller was hitting
- Fix a UBSAN hit in iova_bitmap due to shift out of bounds
- Add missing cleanup of fault events during FD shutdown, fixing a
memory leak
- Improve the fault delivery flow to have a smaller locking critical
region that does not include copy_to_user()
- Fix 32 bit ABI breakage due to missed implicit padding, and fix the
stack memory leakage"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Fix struct iommu_hwpt_pgfault init and padding
iommufd/fault: Use a separate spinlock to protect fault->deliver list
iommufd/fault: Destroy response and mutex in iommufd_fault_destroy()
iommufd: Keep OBJ/IOCTL lists in an alphabetical order
iommufd/iova_bitmap: Fix shift-out-of-bounds in iova_bitmap_offset_to_index()
iommu: iommufd: fix WARNING in iommufd_device_unbind
iommufd: Deal with IOMMU_HWPT_FAULT_ID_VALID in iommufd core
iommufd/selftest: Remove domain_alloc_paging()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core changes:
- PASID support for the blocked_domain
ARM-SMMU Updates:
- SMMUv2:
- Implement per-client prefetcher configuration on Qualcomm SoCs
- Support for the Adreno SMMU on Qualcomm's SDM670 SOC
- SMMUv3:
- Pretty-printing of event records
- Drop the ->domain_alloc_paging implementation in favour of
domain_alloc_paging_flags(flags==0)
- IO-PGTable:
- Generalisation of the page-table walker to enable external
walkers (e.g. for debugging unexpected page-faults from the GPU)
- Minor fix for handling concatenated PGDs at stage-2 with 16KiB
pages
- Misc:
- Clean-up device probing and replace the crufty probe-deferral
hack with a more robust implementation of
arm_smmu_get_by_fwnode()
- Device-tree binding updates for a bunch of Qualcomm platforms
Intel VT-d Updates:
- Remove domain_alloc_paging()
- Remove capability audit code
- Draining PRQ in sva unbind path when FPD bit set
- Link cache tags of same iommu unit together
AMD-Vi Updates:
- Use CMPXCHG128 to update DTE
- Cleanups of the domain_alloc_paging() path
RiscV IOMMU:
- Platform MSI support
- Shutdown support
Rockchip IOMMU:
- Add DT bindings for Rockchip RK3576
More smaller fixes and cleanups"
* tag 'iommu-updates-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (66 commits)
iommu: Use str_enable_disable-like helpers
iommu/amd: Fully decode all combinations of alloc_paging_flags
iommu/amd: Move the nid to pdom_setup_pgtable()
iommu/amd: Change amd_iommu_pgtable to use enum protection_domain_mode
iommu/amd: Remove type argument from do_iommu_domain_alloc() and related
iommu/amd: Remove dev == NULL checks
iommu/amd: Remove domain_alloc()
iommu/amd: Remove unused amd_iommu_domain_update()
iommu/riscv: Fixup compile warning
iommu/arm-smmu-v3: Add missing #include of linux/string_choices.h
iommu/arm-smmu-v3: Use str_read_write helper w/ logs
iommu/io-pgtable-arm: Add way to debug pgtable walk
iommu/io-pgtable-arm: Re-use the pgtable walk for iova_to_phys
iommu/io-pgtable-arm: Make pgtable walker more generic
iommu/arm-smmu: Add ACTLR data and support for qcom_smmu_500
iommu/arm-smmu: Introduce ACTLR custom prefetcher settings
iommu/arm-smmu: Add support for PRR bit setup
iommu/arm-smmu: Refactor qcom_smmu structure to include single pointer
iommu/arm-smmu: Re-enable context caching in smmu reset operation
iommu/vt-d: Link cache tags of same iommu unit together
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
- Consolidate the machine_kexec_mask_interrupts() by providing a
generic implementation and replacing the copy & pasta orgy in the
relevant architectures.
- Prevent unconditional operations on interrupt chips during kexec
shutdown, which can trigger warnings in certain cases when the
underlying interrupt has been shut down before.
- Make the enforcement of interrupt handling in interrupt context
unconditionally available, so that it actually works for non x86
related interrupt chips. The earlier enablement for ARM GIC chips set
the required chip flag, but did not notice that the check was hidden
behind a config switch which is not selected by ARM[64].
- Decrapify the handling of deferred interrupt affinity setting.
Some interrupt chips require that affinity changes are made from the
context of handling an interrupt to avoid certain race conditions.
For x86 this was the default, but with interrupt remapping this
requirement was lifted and a flag was introduced which tells the core
code that affinity changes can be done in any context. Unrestricted
affinity changes are the default for the majority of interrupt chips.
RISCV has the requirement to add the deferred mode to one of it's
interrupt controllers, but with the original implementation this
would require to add the any context flag to all other RISC-V
interrupt chips. That's backwards, so reverse the logic and require
that chips, which need the deferred mode have to be marked
accordingly. That avoids chasing the 'sane' chips and marking them.
- Add multi-node support to the Loongarch AVEC interrupt controller
driver.
- The usual tiny cleanups, fixes and improvements all over the place.
* tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/generic_chip: Export irq_gc_mask_disable_and_ack_set()
genirq/timings: Add kernel-doc for a function parameter
genirq: Remove IRQ_MOVE_PCNTXT and related code
x86/apic: Convert to IRQCHIP_MOVE_DEFERRED
genirq: Provide IRQCHIP_MOVE_DEFERRED
hexagon: Remove GENERIC_PENDING_IRQ leftover
ARC: Remove GENERIC_PENDING_IRQ
genirq: Remove handle_enforce_irqctx() wrapper
genirq: Make handle_enforce_irqctx() unconditionally available
irqchip/loongarch-avec: Add multi-nodes topology support
irqchip/ts4800: Replace seq_printf() by seq_puts()
irqchip/ti-sci-inta : Add module build support
irqchip/ti-sci-intr: Add module build support
irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic function
irqchip: keystone: Use syscon_regmap_lookup_by_phandle_args
genirq/kexec: Prevent redundant IRQ masking by checking state before shutdown
kexec: Consolidate machine_kexec_mask_interrupts() implementation
genirq: Reuse irq_thread_fn() for forced thread case
genirq: Move irq_thread_fn() further up in the code
|
|
The iommu_hwpt_pgfault is used to report IO page fault data to userspace,
but iommufd_fault_fops_read was never zeroing its padding. This leaks the
content of the kernel stack memory to userspace.
Also, the iommufd uAPI requires explicit padding and use of __aligned_u64
to ensure ABI compatibility's with 32 bit.
pahole result, before:
struct iommu_hwpt_pgfault {
__u32 flags; /* 0 4 */
__u32 dev_id; /* 4 4 */
__u32 pasid; /* 8 4 */
__u32 grpid; /* 12 4 */
__u32 perm; /* 16 4 */
/* XXX 4 bytes hole, try to pack */
__u64 addr; /* 24 8 */
__u32 length; /* 32 4 */
__u32 cookie; /* 36 4 */
/* size: 40, cachelines: 1, members: 8 */
/* sum members: 36, holes: 1, sum holes: 4 */
/* last cacheline: 40 bytes */
};
pahole result, after:
struct iommu_hwpt_pgfault {
__u32 flags; /* 0 4 */
__u32 dev_id; /* 4 4 */
__u32 pasid; /* 8 4 */
__u32 grpid; /* 12 4 */
__u32 perm; /* 16 4 */
__u32 __reserved; /* 20 4 */
__u64 addr __attribute__((__aligned__(8))); /* 24 8 */
__u32 length; /* 32 4 */
__u32 cookie; /* 36 4 */
/* size: 40, cachelines: 1, members: 9 */
/* forced alignments: 1 */
/* last cacheline: 40 bytes */
} __attribute__((__aligned__(8)));
Fixes: c714f15860fc ("iommufd: Add fault and response message definitions")
Link: https://patch.msgid.link/r/20250120195051.2450-1-nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The fault->mutex serializes the fault read()/write() fops and the
iommufd_fault_auto_response_faults(), mainly for fault->response. Also, it
was conveniently used to fence the fault->deliver in poll() fop and
iommufd_fault_iopf_handler().
However, copy_from/to_user() may sleep if pagefaults are enabled. Thus,
they could take a long time to wait for user pages to swap in, blocking
iommufd_fault_iopf_handler() and its caller that is typically a shared IRQ
handler of an IOMMU driver, resulting in a potential global DOS.
Instead of reusing the mutex to protect the fault->deliver list, add a
separate spinlock, nested under the mutex, to do the job.
iommufd_fault_iopf_handler() would no longer be blocked by
copy_from/to_user().
Add a free_list in iommufd_auto_response_faults(), so the spinlock can
simply fence a fast list_for_each_entry_safe routine.
Provide two deliver list helpers for iommufd_fault_fops_read() to use:
- Fetch the first iopf_group out of the fault->deliver list
- Restore an iopf_group back to the head of the fault->deliver list
Lastly, move the mutex closer to the response in the fault structure,
and update its kdoc accordingly.
Fixes: 07838f7fd529 ("iommufd: Add iommufd fault object")
Link: https://patch.msgid.link/r/20250117192901.79491-1-nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
'rockchip', 'riscv', 'core', 'intel/vt-d' and 'amd/amd-vi' into next
|
|
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20250114192642.912331-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Currently AMD does not support
IOMMU_HWPT_ALLOC_PASID | IOMMU_HWPT_ALLOC_DIRTY_TRACKING
It should be rejected. Instead it creates a V1 domain without dirty
tracking support.
Use a switch to fully decode the flags.
Fixes: ce2cd175469f ("iommu/amd: Enhance amd_iommu_domain_alloc_user()")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v2-9776c53c2966+1c7-amd_paging_flags_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The only thing that uses the nid is the io_pgtable code, and it should be
set before calling alloc_io_pgtable_ops() to ensure that the top levels
are allocated on the correct nid.
Since dev is never NULL now we can just do this trivially and remove the
other uses of nid. SVA and identity code paths never use it since they
don't use io_pgtable.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v2-9776c53c2966+1c7-amd_paging_flags_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Currently it uses enum io_pgtable_fmt which is from the io pagetable code
and most of the enum values are invalid. protection_domain_mode is
internal the driver and has the only two valid values.
Fix some signatures and variables to use the right type as well.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v2-9776c53c2966+1c7-amd_paging_flags_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
do_iommu_domain_alloc() is only called from
amd_iommu_domain_alloc_paging_flags() so type is always
IOMMU_DOMAIN_UNMANAGED. Remove type and all the dead conditionals checking
it.
IOMMU_DOMAIN_IDENTITY checks are similarly obsolete as the conversion to
the global static identity domain removed those call paths.
The caller of protection_domain_alloc() should set the type, fix the miss
in the SVA code.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v2-9776c53c2966+1c7-amd_paging_flags_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This is no longer possible, amd_iommu_domain_alloc_paging_flags() is never
called with dev = NULL from the core code. Similarly
get_amd_iommu_from_dev() can never be NULL either.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v2-9776c53c2966+1c7-amd_paging_flags_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
IOMMU drivers should not be sensitive to the domain type, a paging domain
should be created based only on the flags passed in, the same for all
callers.
AMD was using the domain_alloc() path to force VFIO into a v1 domain type,
because v1 gives higher performance. However now that
IOMMU_HWPT_ALLOC_PASID is present, and a NULL device is not possible,
domain_alloc_paging_flags() will do the right thing for VFIO.
When invoked from VFIO flags will be 0 and the amd_iommu_pgtable type of
domain will be selected. This is v1 by default unless the kernel command
line has overridden it to v2.
If the admin is forcing v2 assume they know what they are doing so force
it everywhere, including for VFIO.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-9776c53c2966+1c7-amd_paging_flags_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
All the callers have been removed by the below commit, remove the
implementation and prototypes.
Fixes: 322d889ae7d3 ("iommu/amd: Remove amd_iommu_domain_update() from page table freeing")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-9776c53c2966+1c7-amd_paging_flags_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When __BITS_PER_LONG == 32, size_t is defined as unsigned int rather
than unsigned long. Therefore, we should use size_t to avoid
type-checking errors.
Fixes: 488ffbf18171 ("iommu/riscv: Paging domain support")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Tomasz Jeznach <tjeznach@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Link: https://lore.kernel.org/r/20250103024616.3359159-1-guoren@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Both were missing in the initial patch.
Fixes: 07838f7fd529 ("iommufd: Add iommufd fault object")
Link: https://patch.msgid.link/r/bc8bb13e215af27e62ee51bdba3648dd4ed2dce3.1736923732.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Instead of marking individual interrupts as safe to be migrated in
arbitrary contexts, mark the interrupt chips, which require the interrupt
to be moved in actual interrupt context, with the new IRQCHIP_MOVE_DEFERRED
flag. This makes more sense because this is a per interrupt chip property
and not restricted to individual interrupts.
That flips the logic from the historical opt-out to a opt-in model. This is
simpler to handle for other architectures, which default to unrestricted
affinity setting. It also allows to cleanup the redundant core logic
significantly.
All interrupt chips, which belong to a top-level domain sitting directly on
top of the x86 vector domain are marked accordingly, unless the related
setup code marks the interrupts with IRQ_MOVE_PCNTXT, i.e. XEN.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/all/20241210103335.563277044@linutronix.de
|
|
Reorder the existing OBJ/IOCTL lists.
Also run clang-format for the same coding style at line wrappings.
No functional change.
Link: https://patch.msgid.link/r/c5e6d6e0a0bb7abc92ad26937fde19c9426bee96.1736237481.git.nicolinc@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Resolve a UBSAN shift-out-of-bounds issue in iova_bitmap_offset_to_index()
where shifting the constant "1" (of type int) by bitmap->mapped.pgshift
(an unsigned long value) could result in undefined behavior.
The constant "1" defaults to a 32-bit "int", and when "pgshift" exceeds
31 (e.g., pgshift = 63) the shift operation overflows, as the result
cannot be represented in a 32-bit type.
To resolve this, the constant is updated to "1UL", promoting it to an
unsigned long type to match the operand's type.
Fixes: 58ccf0190d19 ("vfio: Add an IOVA bitmap support")
Link: https://patch.msgid.link/r/20250113223820.10713-1-qasdev00@gmail.com
Reported-by: syzbot <syzbot+85992ace37d5b7b51635@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=85992ace37d5b7b51635
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix an issue detected by syzbot:
WARNING in iommufd_device_unbind iommufd: Time out waiting for iommufd object to become free
Resolve a warning in iommufd_device_unbind caused by a timeout while
waiting for the shortterm_users reference count to reach zero. The
existing 10-second timeout is insufficient in some scenarios, resulting in
failures the above warning.
Increase the timeout in iommufd_object_dec_wait_shortterm from 10 seconds
to 60 seconds to allow sufficient time for the reference count to drop to
zero. This change prevents premature timeouts and reduces the likelihood
of warnings during iommufd_device_unbind.
Fixes: 6f9c4d8c468c ("iommufd: Do not UAF during iommufd_put_object()")
Link: https://patch.msgid.link/r/20241123195900.3176-1-surajsonawane0215@gmail.com
Reported-by: syzbot+c92878e123785b1fa2db@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c92878e123785b1fa2db
Tested-by: syzbot+c92878e123785b1fa2db@syzkaller.appspotmail.com
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Commit f2c77f6e41e6 ("iommu/arm-smmu-v3: Use str_read_write helper w/
logs") introduced a call to str_read_write() in the SMMUv3 driver but
without an explicit #include of <linux/string_choices.h>. This breaks
the build for custom configurations where CONFIG_ACPI=n:
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c:1909:4: error: call to
undeclared function 'str_read_write'; ISO C99 and later do not
support implicit function declarations [-Wimplicit-function-declaration]
1909 | str_read_write(evt->read),
| ^
Add the missing #include.
Link: https://lore.kernel.org/r/d07e82a4-2880-4ae3-961b-471bfa7ac6c4@samsung.com
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: f2c77f6e41e6 ("iommu/arm-smmu-v3: Use str_read_write helper w/ logs")
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Current code gets the APIC IDs for CPUs numbered 255 and lower.
This code assumes cpu_possible_mask is dense, which is not true in
the general case per [1]. If cpu_possible_mask contains holes,
num_possible_cpus() is less than nr_cpu_ids, so some CPUs might get
skipped. Furthermore, getting the APIC ID of a CPU that isn't in
cpu_possible_mask is invalid.
However, the configurations that Hyper-V provides to guest VMs on x86
hardware, in combination with how x86 code assigns Linux CPU numbers,
*does* always produce a dense cpu_possible_mask. So the dense assumption
is not currently causing failures. But for robustness against future
changes in how cpu_possible_mask is populated, update the code to no
longer assume dense.
The correct approach is to determine the range to scan based on
nr_cpu_ids, and skip any CPUs that are not in the cpu_possible_mask.
[1] https://lore.kernel.org/lkml/SN6PR02MB4157210CC36B2593F8572E5ED4692@SN6PR02MB4157.namprd02.prod.outlook.com/
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241003035333.49261-4-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241003035333.49261-4-mhklinux@outlook.com>
|
|
Adopt the `str_read_write` helper in event logging as suggested by the
coccinelle tool.
Signed-off-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/all/20250107130053.GC6991@willie-the-truck/
Link: https://lore.kernel.org/r/20250107165100.1093357-1-praan@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add an io-pgtable method to walk the pgtable returning the raw PTEs that
would be traversed for a given iova access.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20241210165127.600817-4-robdclark@gmail.com
[will: Removed 'arm_lpae_io_pgtable_walk_data::level' per Mostafa]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Re-use the generic pgtable walk path.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20241210165127.600817-3-robdclark@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We can re-use this basic pgtable walk logic in a few places.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20241210165127.600817-2-robdclark@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add ACTLR data table for qcom_smmu_500 including corresponding data
entry and set prefetch value by way of a list of compatible strings.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
Link: https://lore.kernel.org/r/20241212151402.159102-6-quic_bibekkum@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently in Qualcomm SoCs the default prefetch is set to 1 which allows
the TLB to fetch just the next page table. MMU-500 features ACTLR
register which is implementation defined and is used for Qualcomm SoCs
to have a custom prefetch setting enabling TLB to prefetch the next set
of page tables accordingly allowing for faster translations.
ACTLR value is unique for each SMR (Stream matching register) and stored
in a pre-populated table. This value is set to the register during
context bank initialisation.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
Link: https://lore.kernel.org/r/20241212151402.159102-5-quic_bibekkum@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add an adreno-smmu-priv interface for drm/msm to call into arm-smmu-qcom
and initiate the "Partially Resident Region" (PRR) bit setup or reset
sequence as per request.
This will be used by GPU to setup the PRR bit and related configuration
registers through adreno-smmu private interface instead of directly
poking the smmu hardware.
Suggested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
Link: https://lore.kernel.org/r/20241212151402.159102-4-quic_bibekkum@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
qcom_smmu_match_data is static and constant so refactor qcom_smmu to
store single pointer to qcom_smmu_match_data instead of replicating
multiple child members of the same and handle the further dereferences
in the places that want them.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
Link: https://lore.kernel.org/r/20241212151402.159102-3-quic_bibekkum@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Default MMU-500 reset operation disables context caching in prefetch
buffer. It is however expected for context banks using the ACTLR
register to retain their prefetch value during reset and runtime
suspend.
Add config 'ARM_SMMU_MMU_500_CPRE_ERRATA' to gate this errata workaround
in default MMU-500 reset operation which defaults to 'Y' and provide
option to disable workaround for context caching in prefetch buffer as
and when needed.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
Link: https://lore.kernel.org/r/20241212151402.159102-2-quic_bibekkum@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Cache tag invalidation requests for a domain are accumulated until a
different iommu unit is found when traversing the cache_tags linked list.
But cache tags of same iommu unit can be distributed in the linked list,
this make batched flush less efficient. E.g., one device backed by iommu0
is attached to a domain in between two devices attaching backed by iommu1.
Group cache tags together for same iommu unit in cache_tag_assign() to
maximize the performance of batched flush.
Co-developed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/r/20241219054358.8654-1-zhenzhong.duan@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When a device uses a PASID for SVA (Shared Virtual Address), it's possible
that the PASID entry is marked as non-present and FPD bit set before the
device flushes all ongoing DMA requests and removes the SVA domain. This
can occur when an exception happens and the process terminates before the
device driver stops DMA and calls the iommu driver to unbind the PASID.
There's no need to drain the PRQ in the mm release path. Instead, the PRQ
will be drained in the SVA unbind path. But in such case,
intel_pasid_tear_down_entry() only checks the presence of the pasid entry
and returns directly.
Add the code to clear the FPD bit and drain the PRQ.
Fixes: c43e1ccdebf2 ("iommu/vt-d: Drain PRQs when domain removed from RID")
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241217024240.139615-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The capability audit code was introduced by commit <ad3d19029979>
"iommu/vt-d: Audit IOMMU Capabilities and add helper functions", aiming
to verify the consistency of capabilities across all IOMMUs for supported
features.
Nowadays, all the kAPIs of the iommu subsystem have evolved to be device
oriented, in preparation for supporting heterogeneous IOMMU architectures.
There is no longer a need to require capability consistence among IOMMUs
for any feature.
Remove the iommu cap audit code to make the driver align with the design
in the iommu core.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241216071828.22962-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This is duplicated by intel_iommu_domain_alloc_paging_flags(), just remove
it.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/0-v1-b101d00c5ee5+17645-vtd_paging_flags_jgg@nvidia.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There is a WARN_ON_ONCE to catch an unlikely situation when
domain_remove_dev_pasid can't find the `pasid`. In case it nevertheless
happens we must avoid using a NULL pointer.
Signed-off-by: Kees Bakker <kees@ijzerbout.nl>
Link: https://lore.kernel.org/r/20241218201048.E544818E57E@bout3.ijzerbout.nl
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The return value of amd_iommu_detect is not used, so remove it and
is consistent with other iommu detect functions.
Signed-off-by: Gao Shiyuan <gaoshiyuan@baidu.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250103165808.80939-1-gaoshiyuan@baidu.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare() can now be replaced
by devm_clk_get_prepared() when driver prepares the clocks for the whole
lifetime of the device. Moreover, it is no longer necessary to unprepare
the clocks explicitly.
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250103113059.463033-1-zhangheng@kylinos.cn
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This commit supplies shutdown callback for iommu driver. The shutdown
callback resets necessary registers so that newly booted kernel can pass
riscv_iommu_init_check() after kexec. Also, the shutdown callback resets
iommu mode to bare instead of off so that new kernel can still use PCIE
devices even when CONFIG_RISCV_IOMMU is not enabled.
Signed-off-by: Xu Lu <luxu.kernel@bytedance.com>
Link: https://lore.kernel.org/r/20250103093220.38106-3-luxu.kernel@bytedance.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
