summaryrefslogtreecommitdiff
path: root/drivers/media/common
AgeCommit message (Collapse)Author
2018-09-24media: vb2: check for sane values from queue_setupJohan Fjeldtvedt
Warn and return error from the reqbufs ioctl when driver sets 0 number of planes or 0 as plane sizes, as these values don't make any sense. Checking this here stops obviously wrong values from propagating further and causing various problems that are hard to trace back to either of these values being 0. Signed-off-by: Johan Fjeldtvedt <johfjeld@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24media: replace ADOBERGB by OPRGBHans Verkuil
The CTA-861 standards have been updated to refer to opRGB instead of AdobeRGB. The official standard is in fact named opRGB, so switch to that. The two old defines referring to ADOBERGB in the public API are put under #ifndef __KERNEL__ and a comment mentions that they are deprecated. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: replace strcpy() by strscpy()Mauro Carvalho Chehab
The strcpy() function is being deprecated upstream. Replace it by the safer strscpy(). Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: use strscpy() instead of strlcpy()Mauro Carvalho Chehab
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL terminated strings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: media-request: EPERM -> EACCES/EBUSYHans Verkuil
If requests are not supported by the driver, then return EACCES, not EPERM. If you attempt to mix queueing buffers directly and using requests, then EBUSY is returned instead of EPERM: once a specific queueing mode has been chosen the queue is 'busy' if you attempt the other mode (i.e. direct queueing vs via a request). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: vb2: set reqbufs/create_bufs capabilitiesHans Verkuil
Set the capabilities field of v4l2_requestbuffers and v4l2_create_buffers. The various mapping modes were easy, but for signaling the request capability a new 'supports_requests' bitfield was added to videobuf2-core.h (and set in vim2m and vivid). Drivers have to set this bitfield for any queue where requests are supported. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: v4l2-tpg: add Z16 supportHans Verkuil
Z16 support is identical to Y16, so that's easy to add. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: v4l2-tpg: show either Y'CbCr or HSV encodingHans Verkuil
When logging the current TPG state detect if we are generating a Y'CbCr or HSV pattern and report one or the other instead of both, which is confusing. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-v4l2: refuse qbuf if queue uses requests or vv.Hans Verkuil
Check if the vb2 queue uses requests, and if so refuse to add buffers that are not part of a request. Also check for the reverse: a vb2 queue did not use requests, and an attempt was made to queue a buffer to a request. We might relax this in the future, but for now just return -EPERM in that case. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-core: add uses_requests/qbuf flagsHans Verkuil
Set the first time a buffer from a request is queued to vb2 (uses_requests) or directly queued (uses_qbuf). Cleared when the queue is canceled. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-v4l2: add vb2_request_queue/validate helpersHans Verkuil
The generic vb2_request_validate helper function checks if there are buffers in the request and if so, prepares (validates) all objects in the request. The generic vb2_request_queue helper function queues all buffer objects in the validated request. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-core: add request helper functionsHans Verkuil
Add a new helper function to tell if a request object is a buffer. Add a new helper function that returns true if a media_request contains at least one buffer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-v4l2: integrate with media requestsHans Verkuil
This implements the V4L2 part of the request support. The main change is that vb2_qbuf and vb2_prepare_buf now have a new media_device pointer. This required changes to several drivers that did not use the vb2_ioctl_qbuf/prepare_buf helper functions. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-core: integrate with media requestsHans Verkuil
Buffers can now be prepared or queued for a request. A buffer is unbound from the request at vb2_buffer_done time or when the queue is cancelled. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: vb2: add init_buffer buffer opHans Verkuil
We need to initialize the request_fd field in struct vb2_v4l2_buffer to -1 instead of the default of 0. So we need to add a new op that is called when struct vb2_v4l2_buffer is allocated. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videodev2.h: Add request_fd field to v4l2_bufferHans Verkuil
When queuing buffers allow for passing the request that should be associated with this buffer. If V4L2_BUF_FLAG_REQUEST_FD is set, then request_fd is used as the file descriptor. If a buffer is stored in a request, but not yet queued to the driver, then V4L2_BUF_FLAG_IN_REQUEST is set. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: vb2: drop VB2_BUF_STATE_PREPARED, use bool prepared/synced insteadHans Verkuil
The PREPARED state becomes a problem with the request API: a buffer could be PREPARED but dequeued, or PREPARED and in state IN_REQUEST. PREPARED is really not a state as such, but more a property of the buffer. So make new 'prepared' and 'synced' bools instead to remember whether the buffer is prepared and/or synced or not. V4L2_BUF_FLAG_PREPARED is only set if the buffer is both synced and prepared and in the DEQUEUED state. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: vb2: store userspace data in vb2_v4l2_bufferHans Verkuil
The userspace-provided plane data needs to be stored in vb2_v4l2_buffer. Currently this information is applied by __fill_vb2_buffer() which is called by the core prepare_buf and qbuf functions, but when using requests these functions aren't called yet since the buffer won't be prepared until the media request is actually queued. In the meantime this information has to be stored somewhere and vb2_v4l2_buffer is a good place for it. The __fill_vb2_buffer callback now just copies the relevant information from vb2_v4l2_buffer into the planes array. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-v4l2: replace if by switch in __fill_vb2_buffer()Hans Verkuil
Replace 'if' statements by a switch in __fill_vb2_buffer() in preparation of the next patch. No other changes. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-v4l2: move __fill_v4l2_buffer() functionHans Verkuil
Move the __fill_v4l2_buffer() to before the vb2_queue_or_prepare_buf() function to prepare for the next two patches. No other changes. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-15Merge tag 'media/v4.19-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new Socionext MN88443x ISDB-S/T demodulator driver: mn88443x - new sensor drivers: ak7375, ov2680 and rj54n1cb0c - an old soc-camera sensor driver converted to the V4L2 framework: mt9v111 - a new Voice-Coil Motor (VCM) driver: dw9807-vcm - some cleanups at cx25821, removing legacy unused code - some improvements at ddbridge driver - new platform driver: vicodec - some DVB API cleanups, removing ioctls and compat code for old out-of-tree drivers that were never merged upstream - improvements at DVB core to support frontents that support both Satellite and non-satellite delivery systems - got rid of the unused VIDIOC_RESERVED V4L2 ioctl - some cleanups/improvements at gl861 ISDB driver - several improvements on ov772x, ov7670 and ov5640, imx274, ov5645, and smiapp sensor drivers - fixes at em28xx to support dual TS devices - some cleanups at V4L2/VB2 locking logic - some API improvements at media controller - some cec core and drivers improvements - some uvcvideo improvements - some improvements at platform drivers: stm32-dcmi, rcar-vin, coda, reneseas-ceu, imx, vsp1, venus, camss - lots of other cleanups and fixes * tag 'media/v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (406 commits) Revert "media: vivid: shut up warnings due to a non-trivial logic" siano: get rid of an unused return code for debugfs register media: isp: fix a warning about a wrong struct initializer media: radio-wl1273: fix return code for the polling routine media: s3c-camif: fix return code for the polling routine media: saa7164: fix return codes for the polling routine media: exynos-gsc: fix return code if mutex was interrupted media: mt9v111: Fix build error with no VIDEO_V4L2_SUBDEV_API media: xc4000: get rid of uneeded casts media: drxj: get rid of uneeded casts media: tuner-xc2028: don't use casts for printing sizes media: cleanup fall-through comments media: vivid: shut up warnings due to a non-trivial logic media: rtl28xxu: be sure that it won't go past the array size media: mt9v111: avoid going past the buffer media: vsp1_dl: add a description for cmdpool field media: sta2x11: add a missing parameter description media: v4l2-mem2mem: add descriptions to MC fields media: i2c: fix warning in Aptina MT9V111 media: imx: shut up a false positive warning ...
2018-08-08siano: get rid of an unused return code for debugfs registerMauro Carvalho Chehab
The siano's debugfs register logic is optional: it should be ok if it fails. So, no need to check if debufs register succeeded. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: dvb: represent min/max/step/tolerance freqs in HzMauro Carvalho Chehab
Right now, satellite frontend drivers specify frequencies in kHz, while terrestrial/cable ones specify in Hz. That's confusing for developers. However, the main problem is that universal frontends capable of handling both satellite and non-satelite delivery systems are appearing. We end by needing to hack the drivers in order to support such hybrid frontends. So, convert everything to specify frontend frequencies in Hz. Tested-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-24media: videobuf2-core: check for q->error in vb2_core_qbuf()Hans Verkuil
The vb2_core_qbuf() function didn't check if q->error was set. It is checked in __buf_prepare(), but that function isn't called if the buffer was already prepared before with VIDIOC_PREPARE_BUF. So check it at the start of vb2_core_qbuf() as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-22Merge tag 'drm-misc-next-2018-06-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.19: UAPI Changes: - Add writeback connector (Brian Starkey/Liviu Dudau) - Add "content type" property to HDMI connectors (Stanislav Lisovskiy) Cross-subsystem Changes: - some devicetree Docs update - fix compile breakage on ION due to the dma-buf cleanups (Christian König) Core Changes: - Reject over-sized allocation requests early (Chris Wilson) - gem-fb-helper: Always do implicit sync (Daniel Vetter) - dma-buf cleanups (Christian König) Driver Changes: - Fixes for the otm8009a panel driver (Philippe Cornu) - Add Innolux TV123WAM panel driver support (Sandeep Panda) - Move GEM BO to drm_framebuffer in few drivers (Daniel Stone) - i915 pinning improvements (Chris Wilson) - Stop consulting plane->fb/crtc in a few drivers (Ville Syrjälä) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621105428.GA20795@juma
2018-06-20dma-buf: remove kmap_atomic interfaceChristian König
Neither used nor correctly implemented anywhere. Just completely remove the interface. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/226645/
2018-06-20dma_buf: remove device parameter from attach callback v2Christian König
The device parameter is completely unused because it is available in the attachment structure as well. v2: fix kerneldoc as well Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/226643/
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-28media: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Note: - The various VIDEOBUF*DMA* symbols had to loose their dependencies on HAS_DMA, as they are selected by several individual drivers. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: videobuf2-core: don't call memop 'finish' when queueingHans Verkuil
When a buffer is queued or requeued in vb2_buffer_done, then don't call the finish memop. In this case the buffer is only returned to vb2, not to userspace. Calling 'finish' here will cause an unbalance when the queue is canceled, since the core will call the same memop again. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-15media: siano: use GFP_DMA only for smssdioMauro Carvalho Chehab
Right now, the Siano's core uses GFP_DMA for both USB and SDIO variants of the driver. There's no reason to use it for USB. So, pass GFP_DMA as a parameter during sms core register. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-11media: saa7146: fix error return from master_xferPeter Rosin
Returning -1 (-EPERM) is not appropriate here, go with -EIO. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04media: lgdt330x: convert it to the new I2C binding wayMauro Carvalho Chehab
Convert the driver to allow its usage with the new I2C binding way. Please notice that this patch doesn't convert the callers to bind to it using the new way. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04media: flexcop-i2c: get rid of KERN_CONTMauro Carvalho Chehab
Coverity complains about werid stuff at the debug logic: CID 113542 (#1 of 1): Out-of-bounds access (ARRAY_VS_SINGLETON)10. callee_ptr_arith: Passing buf to function flexcop_i2c_write4 which uses it as an array. This might corrupt or misinterpret adjacent memory locations. Instead of directly addressing the issue there, let's rework at the logic there. On newer kernels, KERN_CONT does nothing, as the previous message won't wait for a continuation. Also, both flexcop_i2c_read4() and flexcop_i2c_write4(), called by it, will print stuff if (debug &4). So, the way it is is too buggy. There are two kinds of debug stuff there: deb_i2c() and a code hidden under #ifdef DUMP_I2C_MESSAGES, with can't be selected without touching the source code. Also, if both debug & 0x4 and DUMP_I2C_MESSAGES, flexcop_i2c_request() will emit two debug messages per call with different data, with sounds messy. Simplify it by getting rid of DUMP_I2C_MESSAGES and adding a new flag to debug (0x40), and making the debug logic there more consistent. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04media: siano: be sure to not override devpath sizeMauro Carvalho Chehab
Right now, at siano driver, all places where devpath is defined has sizeof(devpath) == 32. So, there's no practical risc of going past devpath array anywhere. Still, code changes might cause troubles. It also confuses Coverity: CID 139059 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW) 9. fixed_size_dest: You might overrun the 32-character fixed-size string entry->devpath by copying devpath without checking the length. 10. parameter_as_source: Note: This defect has an elevated risk because the source argument is a parameter of the current function. So, explicitly limit strcmp() and strcpy() to ensure that the devpath size (32) will be respected. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04media: siano: get rid of __le32/__le16 cast warningsMauro Carvalho Chehab
Those are all false-positives that appear with smatch when building for arm: drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16 Get rid of them by adding explicit forced casts. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-04-04media: v4l2-tpg-core.c: add space after %Hans Verkuil
I know, it's a measly space, but I can't stand it since the V4L2_PIX_FMT_NV24 case before this case does it right. So add the space in order to restore blessed symmetry and consistency and to make the world whole again... Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-23media: v4l2-tpg-core: avoid buffer overflowsMauro Carvalho Chehab
Fix the following warnings: drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:1146 gen_twopix() error: buffer overflow 'buf[1]' 8 <= 8 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:1152 gen_twopix() error: buffer overflow 'buf[1]' 8 <= 8 Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06media: siano: Fix coherent memory allocation failure on arm64Tomoki Sekiyama
On some architectures such as arm64, siano chip based TV-tuner USB devices are not recognized correctly due to coherent memory allocation failure with the following error: [ 663.556135] usbcore: deregistering interface driver smsusb [ 683.624809] smsusb:smsusb_probe: board id=18, interface number 0 [ 683.633530] smsusb:smsusb_init_device: smscore_register_device(...) failed, rc -12 [ 683.641501] smsusb:smsusb_probe: Device initialized with return code -12 [ 683.652978] smsusb: probe of 1-1:1.0 failed with error -12 This is caused by dma_alloc_coherent(NULL, ...) returning NULL in smscoreapi.c. To fix this error, allocate the buffer memory for the USB devices via kmalloc() and let the USB core do the DMA mapping and free. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-05Merge commit 'v4.16-rc4~0' into patchworkMauro Carvalho Chehab
* commit 'v4.16-rc4~0': (900 commits) Linux 4.16-rc4 memremap: fix softlockup reports at teardown libnvdimm: re-enable deep flush for pmem devices via fsync() MAINTAINERS: take over Kconfig maintainership vfio: disable filesystem-dax page pinning kconfig: fix line number in recursive inclusion error message Coccinelle: memdup: Fix typo in warning messages i2c: octeon: Prevent error message on bus error parisc: Reduce irq overhead when run in qemu parisc: Use cr16 interval timers unconditionally on qemu parisc: Check if secondary CPUs want own PDC calls parisc: Hide virtual kernel memory layout parisc: Fix ordering of cache and TLB flushes kconfig: Update ncurses package names for menuconfig kbuild/kallsyms: trivial typo fix kbuild: test --build-id linker flag by ld-option instead of cc-ldoption kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignment kconfig: Don't leak choice names during parsing sh: fix build error for empty CONFIG_BUILTIN_DTB_SOURCE kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list ...
2018-02-26media: vb2: Makefile: place vb2-trace together with vb2-coreMauro Carvalho Chehab
We don't want a separate module for vb2-trace. That fixes this warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/media/common/videobuf2/vb2-trace.o When building as module. While here, add a SPDX header. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26media: vb2: Fix videobuf2 to map correct areaMasami Hiramatsu
Fixes vb2_vmalloc_get_userptr() to ioremap correct area. Since the current code does ioremap the page address, if the offset > 0, it does not do ioremap the last page and results in kernel panic. This fixes to pass the size + offset to ioremap so that ioremap can map correct area. Also, this uses __pfn_to_phys() to get the physical address of given PFN. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reported-by: Takao Orito <orito.takao@socionext.com> Reported-by: Fumihiro ATSUMI <atsumi@infinitegra.co.jp> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26media: vb2: core: Finish buffers at the end of the streamSakari Ailus
If buffers were prepared or queued and the buffers were released without starting the queue, the finish mem op (corresponding to the prepare mem op) was never called to the buffers. Before commit a136f59c0a1f there was no need to do this as in such a case the prepare mem op had not been called yet. Address the problem by explicitly calling finish mem op when the queue is stopped if the buffer is in either prepared or queued state. Fixes: a136f59c0a1f ("[media] vb2: Move buffer cache synchronisation to prepare from queue") Cc: stable@vger.kernel.org # for v4.13 and up Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: videobuf2: fix build issues with vb2-traceMauro Carvalho Chehab
There was a trouble with vb2-trace: instead of being part of VB2 core, it was stored at V4L2 videodev. That was wrong, as it doesn't actually belong to V4L2 core. Now that vb2 is not part of v4l2-core, its trace functions should be moved altogether. So, move it to its rightful place: at videobuf2-core. That fixes those errors: drivers/media/common/videobuf2/videobuf2-core.o: In function `__read_once_size': ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_queue' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_queue' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_done' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_done' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_qbuf' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_qbuf' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_dqbuf' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_dqbuf' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x10): undefined reference to `__tracepoint_vb2_buf_queue' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x28): undefined reference to `__tracepoint_vb2_buf_done' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x40): undefined reference to `__tracepoint_vb2_qbuf' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x58): undefined reference to `__tracepoint_vb2_dqbuf' Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: videobuf2: Add VIDEOBUF2_V4L2 Kconfig option for VB2 V4L2 partSakari Ailus
Videobuf2 is now separate from V4L2 and can be now built without it, at least in principle --- enabling videobuf2 in kernel configuration attempts to compile videobuf2-v4l2.c but that will fail if CONFIG_VIDEO_V4L2 isn't enabled. Solve this by adding a separate Kconfig option for videobuf2-v4l2 and make it a separate module as well. This means that drivers now need to choose both the appropriate videobuf2 memory type (VIDEOBUF2_{VMALLOC,DMA_CONTIG,DMA_SG}) and VIDEOBUF2_V4L2 if they need both. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-14media: add SPDX license infoHans Verkuil
Replace the old license information with the corresponding SPDX license for the remaining media drivers that Cisco authored. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06Merge tag 'media/v4.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - videobuf2 was moved to a media/common dir, as it is now used by the DVB subsystem too - Digital TV core memory mapped support interface - new sensor driver: ov7740 - several improvements at ddbridge driver - new V4L2 driver: IPU3 CIO2 CSI-2 receiver unit, found on some Intel SoCs - new tuner driver: tda18250 - finally got rid of all LIRC staging drivers - as we don't have old lirc drivers anymore, restruct the lirc device code - add support for UVC metadata - add a new staging driver for NVIDIA Tegra Video Decoder Engine - DVB kAPI headers moved to include/media - synchronize the kAPI and uAPI for the DVB subsystem, removing the gap for non-legacy APIs - reduce the kAPI gap for V4L2 - lots of other driver enhancements, cleanups, etc. * tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (407 commits) media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32 media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32 media: v4l2-compat-ioctl32.c: avoid sizeof(type) media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32 media: v4l2-compat-ioctl32.c: fix the indentation media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF media: v4l2-ioctl.c: don't copy back the result for -ENOTTY media: v4l2-ioctl.c: use check_fmt for enum/g/s/try_fmt media: vivid: fix module load error when enabling fb and no_error_inj=1 media: dvb_demux: improve debug messages media: dvb_demux: Better handle discontinuity errors media: cxusb, dib0700: ignore XC2028_I2C_FLUSH media: ts2020: avoid integer overflows on 32 bit machines media: i2c: ov7740: use gpio/consumer.h instead of gpio.h media: entity: Add a nop variant of media_entity_cleanup ...
2018-01-30Merge branch 'misc.poll' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-23media: drivers/media/common/videobuf2: rename from videobufHans Verkuil
This directory contains the videobuf2 framework, so name the directory accordingly. The name 'videobuf' typically refers to the old and deprecated videobuf version 1 framework so that was confusing. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit (git 2.34.1) at 2025-07-19 13:05:02 +0000