summaryrefslogtreecommitdiff
path: root/drivers/media/i2c
AgeCommit message (Collapse)Author
2018-09-17media: tvp5150: fix width alignment during set_selection()Marco Felsch
The driver ignored the width alignment which exists due to the UYVY colorspace format. Fix the width alignment and make use of the the provided v4l2 helper function to set the width, height and all alignments in one. Fixes: 963ddc63e20d ("[media] media: tvp5150: Add cropping support") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: declare its own padsMauro Carvalho Chehab
As we don't need anymore to share pad numbers with similar drivers, use its own pad definition instead of a global model. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: saa7115: declare its own padsMauro Carvalho Chehab
As we don't need anymore to share pad numbers with similar drivers, use its own pad definition instead of a global model. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: msp3400: declare its own padsMauro Carvalho Chehab
As we don't need anymore to share pad numbers with similar drivers, use its own pad definition instead of a global model. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: v4l2: taint pads with the signal types for consumer devicesMauro Carvalho Chehab
Consumer devices are provided with a wide different range of types supported by the same driver, allowing different configutations. In order to make easier to setup media controller links, "taint" pads with the signal type it carries. While here, get rid of DEMOD_PAD_VBI_OUT, as the signal it carries is actually the same as the normal video output. The difference happens at the video/VBI interface: - for VBI, only the hidden lines are streamed; - for video, the stream is usually cropped to hide the vbi lines. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: v4l2: remove VBI output padMauro Carvalho Chehab
The signal there is the same as the video output (well, except for sliced VBI, but let's simplify the model and ignore it, at least for now - as it is routed together with raw VBI). Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: avoid going past array on v4l2_querymenu()Mauro Carvalho Chehab
The parameters of v4l2_ctrl_new_std_menu_items() are tricky: instead of the number of possible values, it requires the number of the maximum value. In other words, the ARRAY_SIZE() value should be decremented, otherwise it will go past the array bounds, as warned by KASAN: [ 279.839688] BUG: KASAN: global-out-of-bounds in v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839709] Read of size 8 at addr ffffffffc10a4cb0 by task v4l2-compliance/16676 [ 279.839736] CPU: 1 PID: 16676 Comm: v4l2-compliance Not tainted 4.18.0-rc2+ #120 [ 279.839741] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 [ 279.839743] Call Trace: [ 279.839758] dump_stack+0x71/0xab [ 279.839807] ? v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839817] print_address_description+0x1c9/0x270 [ 279.839863] ? v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839871] kasan_report+0x237/0x360 [ 279.839918] v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839964] __video_do_ioctl+0x2c8/0x590 [videodev] [ 279.840011] ? copy_overflow+0x20/0x20 [videodev] [ 279.840020] ? avc_ss_reset+0xa0/0xa0 [ 279.840028] ? check_stack_object+0x21/0x60 [ 279.840036] ? __check_object_size+0xe7/0x240 [ 279.840080] video_usercopy+0xed/0x730 [videodev] [ 279.840123] ? copy_overflow+0x20/0x20 [videodev] [ 279.840167] ? v4l_enumstd+0x40/0x40 [videodev] [ 279.840177] ? __handle_mm_fault+0x9f9/0x1ba0 [ 279.840186] ? __pmd_alloc+0x2c0/0x2c0 [ 279.840193] ? __vfs_write+0xb6/0x350 [ 279.840200] ? kernel_read+0xa0/0xa0 [ 279.840244] ? video_usercopy+0x730/0x730 [videodev] [ 279.840284] v4l2_ioctl+0xa1/0xb0 [videodev] [ 279.840295] do_vfs_ioctl+0x117/0x8a0 [ 279.840303] ? selinux_file_ioctl+0x211/0x2f0 [ 279.840313] ? ioctl_preallocate+0x120/0x120 [ 279.840319] ? selinux_capable+0x20/0x20 [ 279.840332] ksys_ioctl+0x70/0x80 [ 279.840342] __x64_sys_ioctl+0x3d/0x50 [ 279.840351] do_syscall_64+0x6d/0x1c0 [ 279.840361] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 279.840367] RIP: 0033:0x7fdfb46275d7 [ 279.840369] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48 [ 279.840474] RSP: 002b:00007ffee1179038 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 279.840483] RAX: ffffffffffffffda RBX: 00007ffee1179180 RCX: 00007fdfb46275d7 [ 279.840488] RDX: 00007ffee11790c0 RSI: 00000000c02c5625 RDI: 0000000000000003 [ 279.840493] RBP: 0000000000000002 R08: 0000000000000020 R09: 00000000009f0902 [ 279.840497] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffee117a5a0 [ 279.840501] R13: 00007ffee11790c0 R14: 0000000000000002 R15: 0000000000000000 [ 279.840515] The buggy address belongs to the variable: [ 279.840535] tvp5150_test_patterns+0x10/0xffffffffffffe360 [tvp5150] Fixes: c43875f66140 ("[media] tvp5150: replace MEDIA_ENT_F_CONN_TEST by a control") Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-12media: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> Cc: Benoit Parrot <bparrot@ti.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Hyun Kwon <hyun.kwon@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-12media: i2c: max2175: convert to SPDX identifiersKuninori Morimoto
This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Ramesh Shanmugasundaram <Ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-12media: adv748x: convert to SPDX identifiersKuninori Morimoto
As original license mentioned, it is GPL-2.0+ in SPDX. Then, MODULE_LICENSE() should be "GPL" instead of "GPL v2". See ${LINUX}/include/linux/module.h "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-12media: adv7180: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-12media: i2c: mt9v111: Fix v4l2-ctrl error handlingJacopo Mondi
Fix error handling of v4l2_ctrl creation by inspecting the ctrl.error flag instead of testing for each returned value correctness. As reported by Dan Carpenter returning PTR_ERR() on the v4l2_ctrl_new_std() return value is also wrong, as that function return NULL on error. While at there re-order the cleanup path to respect the operation inverse order. Fixes: aab7ed1c "media: i2c: Add driver for Aptina MT9V111" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2018-09-11media: replace strcpy() by strscpy()Mauro Carvalho Chehab
The strcpy() function is being deprecated upstream. Replace it by the safer strscpy(). Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: use strscpy() instead of strlcpy()Mauro Carvalho Chehab
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL terminated strings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-10media: i2c: mt9v111: Fix v4l2-ctrl error handlingJacopo Mondi
Fix error handling of v4l2_ctrl creation by inspecting the ctrl.error flag instead of testing for each returned value correctness. As reported by Dan Carpenter returning PTR_ERR() on the v4l2_ctrl_new_std() return value is also wrong, as that function return NULL on error. While at there re-order the cleanup path to respect the operation inverse order. Fixes: aab7ed1c "media: i2c: Add driver for Aptina MT9V111" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2018-08-31media: adv7842: enable reduced fps detectionHans Verkuil
The pixelclock detection of the adv7842 is precise enough to detect if the framerate is 60 Hz or 59.94 Hz (aka "reduced fps"). Implement this detection. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: ov5640: fix mode change regressionHugues Fruchet
fixes: 6949d864776e ("media: ov5640: do not change mode if format or frame interval is unchanged"). Symptom was fuzzy image because of JPEG default format not being changed according to new format selected, fix this. Init sequence initialises format to YUV422 UYVY but sensor->fmt initial value was set to JPEG, fix this. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: ov772x: Disable clk on error pathAlexey Khoroshilov
If ov772x_power_on() is unable to get GPIO rstb, the clock is left undisabled. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: i2c: Fix pm_runtime_get_if_in_use() usage in sensor driversSakari Ailus
pm_runtime_get_if_in_use() returns -EINVAL if runtime PM is disabled. This should not be considered an error. Generally the driver has enabled runtime PM already so getting this error due to runtime PM being disabled will not happen. Instead of checking for lesser or equal to zero, check for zero only. Address this for drivers where this pattern exists. This patch has been produced using the following command: $ git grep -l pm_runtime_get_if_in_use -- drivers/media/i2c/ | \ xargs perl -i -pe 's/(pm_runtime_get_if_in_use\(.*\)) \<\= 0/!$1/' Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: ov5670, ov13858: Use pm_runtime_idleSakari Ailus
Replace the calls to pm_runtime_get_noresume() and pm_runtime_put() with pm_runtime_idle() in the driver's probe function. This will have the same effect with fewer calls. pm_runtime_disable() in remove is sufficient as the device is already in RPM_SUSPENDED state. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: ov9650: use SCCB regmapAkinobu Mita
Convert ov965x register access to use SCCB regmap. Cc: Mark Brown <broonie@kernel.org> Cc: Peter Rosin <peda@axentia.se> Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Jacopo Mondi <jacopo+renesas@jmondi.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> (I2C parts) Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: ov772x: use SCCB regmapAkinobu Mita
Convert ov772x register access to use SCCB regmap. Cc: Mark Brown <broonie@kernel.org> Cc: Peter Rosin <peda@axentia.se> Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Jacopo Mondi <jacopo+renesas@jmondi.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> (I2C parts) Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-08media: mt9v111: Fix build error with no VIDEO_V4L2_SUBDEV_APIJacopo Mondi
The v4l2_subdev_get_try_format() function is only defined if the VIDEO_V4L2_SUBDEV_API Kconfig option is enabled. Builds configured without that symbol fails with: drivers/media/i2c/mt9v111.c:801:10: error: implicit declaration of function 'v4l2_subdev_get_try_format'; Fix this by protecting the function call by testing for the right symbol. media: mt9v111: fix random build errors Fix the internal check for it to do the right thing if the subdev API is not built. Fixes: aab7ed1c ("media: i2c: Add driver for Aptina MT9V111") Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-08media: mt9v111: avoid going past the bufferMauro Carvalho Chehab
As warned by smatch: drivers/media/i2c/mt9v111.c:854 mt9v111_enum_frame_size() error: buffer overflow 'mt9v111_frame_sizes' 5 <= 5 drivers/media/i2c/mt9v111.c:855 mt9v111_enum_frame_size() error: buffer overflow 'mt9v111_frame_sizes' 5 <= 5 drivers/media/i2c/mt9v111.c:856 mt9v111_enum_frame_size() error: buffer overflow 'mt9v111_frame_sizes' 5 <= 5 drivers/media/i2c/mt9v111.c:857 mt9v111_enum_frame_size() error: buffer overflow 'mt9v111_frame_sizes' 5 <= 5 Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-07media: i2c: fix warning in Aptina MT9V111Jasmin Jessich
This fixes the "'idx' may be used uninitialized in this function" warning: drivers/media/i2c/mt9v111.c: In function 'mt9v111_set_format': drivers/media/i2c/mt9v111.c:887:15: warning: 'idx' may be used uninitialized in this function [-Wmaybe-uninitialized] unsigned int idx; ^~~ Signed-off-by: Jasmin Jessich <jasmin@anw.at> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: imx274: add cropping support via SELECTION APILuca Ceresoli
Currently this driver does not support cropping. The supported modes are the following, all capturing the entire area: - 3840x2160, 1:1 binning (native sensor resolution) - 1920x1080, 2:1 binning - 1280x720, 3:1 binning The VIDIOC_SUBDEV_S_FMT ioctl chooses among these 3 configurations the one that matches the requested format. Add cropping support via VIDIOC_SUBDEV_S_SELECTION: with target V4L2_SEL_TGT_CROP to choose the captured area, with V4L2_SEL_TGT_COMPOSE to choose the output resolution. To maintain backward compatibility we also allow setting the compose format via VIDIOC_SUBDEV_S_FMT. To obtain this, compose rect and output format are computed in the common helper function __imx274_change_compose(), which sets both to the same width/height values. Cropping also calls __imx274_change_compose() whenever cropping rect size changes in order to reset the compose rect (and output format size) for 1:1 binning. Also rename enum imx274_mode to imx274_binning (and its values from IMX274_MODE_BINNING_* to IMX274_BINNING_*). Without cropping, the two naming are equivalent. With cropping, the resolution could be different, e.g. using 2:1 binning mode to crop 1200x960 and output a 600x480 format. Using binning in the names avoids any misunderstanding. For the same reason, replace the 'size' field in struct imx274_frmfmt with 'bin_ratio'. [Sakari Ailus: Remove leftover condition in imx274_apply_trimming] Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: imx274: use regmap_bulk_write to write multybyte registersLuca Ceresoli
Currently 2-bytes and 3-bytes registers are set by very similar functions doing the needed shift & mask manipulation, followed by very similar for loops setting one byte at a time over I2C. Replace all of this code by a unique helper function that calls regmap_bulk_write(), which has two advantages: - sets all the bytes in a unique I2C transaction - removes lots of now unused code. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: ov2680: Add Omnivision OV2680 sensor driverRui Miguel Silva
This patch adds V4L2 sub-device driver for OV2680 image sensor. The OV2680 is a 1/5" CMOS color sensor from Omnivision. Supports output format: 10-bit Raw RGB. The OV2680 has a single lane MIPI interface. The driver exposes following V4L2 controls: - auto/manual exposure, - exposure, - auto/manual gain, - gain, - horizontal/vertical flip, - test pattern menu. Supported resolution are only: QUXGA, 720P, UXGA. [Sakari Ailus: Drop "-level" from Kconfig help text] Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: i2c: Add driver for Aptina MT9V111Jacopo Mondi
Add V4L2 sensor driver for Aptina MT9V111 CMOS image sensor. The MT9V111 is a 1/4-Inch CMOS image sensor based on MT9V011 with an integrated Image Flow Processor. Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: dw9807-vcm: Recognise this is just the VCM bit of the deviceSakari Ailus
The dw9807 contains a voice coil lens driver as well as an EEPROM. This driver is just for the VCM. Reflect this in the driver's name --- this is already the case for the compatible string, for instance. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: i2c: vs6624: Replace mdelay() with msleep() and usleep_range() in ↵Jia-Ju Bai
vs6624_probe() vs6624_probe() is never called in atomic context. It calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep() and usleep_range(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: i2c: adv7842: Replace mdelay() with msleep() and usleep_range() in ↵Jia-Ju Bai
adv7842_ddr_ram_test() adv7842_ddr_ram_test() is never called in atomic context. It only calls from: adv7842_ddr_ram_test() <- adv7842_command_ram_test() <- adv7842_ioctl() adv7842_ddr_ram_test() calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep() and usleep_range(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: video-i2c: hwmon: fix return value from amg88xx_hwmon_init()Matt Ranostay
PTR_ERR was making any pointer passed an error pointer, and should be replaced with PTR_ERR_OR_ZERO which checks if is an actual error condition. Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: adv7180: add g_frame_interval supportNiklas Söderlund
Implement g_frame_interval to return the current standard's frame interval. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: adv7180: fix field type to V4L2_FIELD_ALTERNATENiklas Söderlund
The ADV7180 and ADV7182 transmit whole fields, bottom field followed by top (or vice-versa, depending on detected video standard). So for chips that do not have support for explicitly setting the field mode via I2P, set the field mode to V4L2_FIELD_ALTERNATE. I2P converts fields into frames using an edge adaptive algorithm. The frame rate is the same as the 'field rate': e.g. X fields per second are now X frames per second. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: video-i2c: add hwmon support for amg88xxMatt Ranostay
AMG88xx has an on-board thermistor which is used for more accurate processing of its temperature readings from the 8x8 thermopile array Cc: linux-hwmon@vger.kernel.org Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: media/i2c: add missing entity functionsHans Verkuil
Several drivers in media/i2c do not set the entity function. Correct this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: adv7180/tvp514x/tvp7002: fix entity functionHans Verkuil
The entity function was ORed with the flags field instead of assigned to the function field. Correct this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: ad9389b/adv7511: set proper media entity functionHans Verkuil
These two drivers both have function MEDIA_ENT_F_DV_ENCODER. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: rename MEDIA_ENT_F_DTV_DECODER to MEDIA_ENT_F_DV_DECODERHans Verkuil
The use of 'DTV' is very confusing since it normally refers to Digital TV e.g. DVB etc. Instead use 'DV' (Digital Video), which nicely corresponds to the DV Timings API used to configure such receivers and transmitters. We keep an alias to avoid breaking userspace applications. Since this alias is only available if __KERNEL__ is *not* defined (i.e. it is only available for userspace, not kernelspace), any drivers that use it also have to be converted to the new define. These drivers are adv7604, adv7842 and tda1997x. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-24media: v4l: i2c: Replace "sensor-level" by "sensor"Sakari Ailus
A lot of sensor drivers are labelled as "sensor-level" drivers. That's odd and somewhat confusing as the term isn't used elsewhere: these are just sensor drivers. Call them such. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-24media: i2c: ov7670: Put ep fwnode after useJacopo Mondi
The just parsed endpoint fwnode has to be put after use. Currently this is done only in error handling path. Fix that by putting node unconditionally after use. Fixes: 01b8444828fc ("media: v4l2: i2c: ov7670: Implement OF mbus configuration") Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-24media: ov5645: Supported external clock is 24MHzTodor Tomov
The external clock frequency was set to 23.88MHz by mistake because of a platform which cannot get closer to 24MHz. The supported by the driver external clock is 24MHz so set it correctly and also fix the values of the pixel clock and link clock. However allow 1% tolerance to the external clock as this difference is small enough to be insignificant. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-24media: smiapp: fix debug messageLuca Ceresoli
ask_h gets printed here instead of ask_w. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-24media: ov5640: do not change mode if format or frame interval is unchangedHugues Fruchet
Save load of mode registers array when V4L2 client sets a format or a frame interval which selects the same mode than the current one. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-24media: smiapp: Set correct MODULE_LICENSESakari Ailus
The smiapp driver is licensed under GNU GPL v2 only, as stated by the header. Reflect this in the MODULE_LICENSE macro. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: cx25840: add kernel-doc description of struct cx25840_stateMaciej S. Szmigiero
This commit describes a device instance private data of the driver (struct cx25840_state) in a kernel-doc style comment. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: imx274: fix typoLuca Ceresoli
pd -> pad Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: imx274: simplify imx274_write_table()Luca Ceresoli
imx274_write_table() is a mere wrapper (and the only user) to imx274_regmap_util_write_table_8(). Remove this useless indirection by merging the two functions into one. Also get rid of the wait_ms_addr and end_addr parameters since it does not make any sense to give them any values other than IMX274_TABLE_WAIT_MS and IMX274_TABLE_END. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: imx274: actually use IMX274_DEFAULT_MODELuca Ceresoli
IMX274_DEFAULT_MODE is defined but not used. Start using it, so the default can be more easily changed without digging into the code. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-18 23:14:43 +0000