summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2019-10-24media: smiapp: Destroy sensor's mutexSakari Ailus
Destroy the mutex initialised by the driver in probe. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: smiapp: Support probing NVM sizeSakari Ailus
The interface supports probing for the NVM size but this was not implemented in the driver. Do that now. This will also make nokia,nvm-size property redundant. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: smiapp: Don't poll for NVM ready on devices that don't need itSakari Ailus
Only some devices require polling for NVM ready. Do the polling only on devices that need it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: smiapp: Add definitions for data transfer if capability bitsSakari Ailus
The data transfer capability register was defined but its bits were not. Do that now. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: smiapp: Refactor reading NVM pageSakari Ailus
Split out reading a single NVM page into a separate function. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: smiapp: Fix error handling at NVM readingSakari Ailus
If NVM reading failed, the device was left powered on. Fix that. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: smiapp: Use the BIT macro where appropriate, remove useless definitionSakari Ailus
The BIT macro is a better way to define register bits, for 1 << bit is risky for 32-bit registers. Also remove the definition of SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN which has a value of zero. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: st-mipid02: add a check for devm_gpiod_get_optionalChuhong Yuan
mipid02_probe misses a check for devm_gpiod_get_optional and may miss the failure. Add a check to fix the problem. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: i2c: Add IMX290 CMOS image sensor driverManivannan Sadhasivam
Add driver for Sony IMX290 CMOS image sensor driver. The driver only supports I2C interface for programming and MIPI CSI-2 for sensor output. [Sakari Ailus: Rewrapped a few lines over 80 chars a little.] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: i2c: ov5695: Fix randbuild errorYueHaibing
If VIDEO_OV5695 is y and V4L2_FWNODE is m, building fails: drivers/media/i2c/ov5695.o: In function `ov5695_probe': ov5695.c:(.text+0xf4c): undefined reference to `v4l2_async_register_subdev_sensor_common' Select V4L2_FWNODE like OV5675 does. Fixes: 623df5d710fe ("media: i2c: ov5695: Modify the function of async register subdev related devices") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ad5820: Add support for ad5821 and ad5823Ricardo Ribalda Delgado
According to the datasheet, both AD5821 and AD5820 share a compatible register-set: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5821.pdf Some camera modules also refer that AD5823 is a replacement of AD5820: https://download.kamami.com/p564094-OV8865_DS.pdf Suggested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ad5820: Add support for of-autoloadRicardo Ribalda Delgado
Since kernel 4.16, i2c devices with DT compatible tag are modprobed using their DT modalias. Without this patch, if this driver is build as module it would never be autoprobed. There is no need to mask it with CONFIG_OF to allow ACPI loading, this also builds find with CONFIG_OF=n. Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ad5820: Add support for enable pinRicardo Ribalda Delgado
This patch adds support for a programmable enable pin. It can be used in situations where the ANA-vcc is not configurable (dummy-regulator), or just to have a more fine control of the power saving. The use of the enable pin is optional. Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ad5820: Define entity functionRicardo Ribalda Delgado
Without this patch, media_device_register_entity throws a warning: dev_warn(mdev->dev, "Entity type for entity %s was not initialized!\n", entity->name); Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ov5640: Make 2592x1944 mode only available at 15 fpsBenoit Parrot
The sensor data sheet clearly state that 2592x1944 only works at 15 fps make sure we don't try to miss configure the pll out of acceptable range. Signed-off-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ov5640: Fix 1920x1080 mode to remove extra enable/disableBenoit Parrot
In the 1920x1080 register array an extra pair of reset ctrl disable re-enable was causing unwanted init delays. Signed-off-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ov5640: add PIXEL_RATE controlBenoit Parrot
Add v4l2 controls to report the pixel rates of each mode. This is needed by some CSI2 receiver in order to perform proper DPHY configuration. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: lm3646: remove redundant assignment to variable rvalColin Ian King
The variable rval is being initialized with a value that is never read and is being re-assigned a little later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ov6650: Fix arbitrary selection of master clock rateJanusz Krzysztofik
A hardcoded 12 MHz master clock frequency has been assumed since conversion of the driver from soc_camera sensor to a standalone V4L2 subdevice by commit 23a52386fabe ("media: ov6650: convert to standalone v4l2 subdevice"). Fix it. Define a static table of supported master clock rates (fix misnamed symbol while being at it), then use v4l2_clk_get/set_rate() to obtain a clock rate matching one of those supported. On success, apply respective master clock hardware divisor provided by the matching element of the table. [Sakari Ailus: Initialize xclk to NULL.] Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ov6650: Drop unused .pclk_max fieldJanusz Krzysztofik
This field of the driver private structure is no longer used, drop it. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ov6650: Don't reapply pixel clock divisor on format changeJanusz Krzysztofik
As calculation of pixel clock hardware divisor no longer depends on mbus format specific maximum pixel clock, there is no need to reapply the divisor on format change. Drop related code from ov6650_s_fmt() helper. Since a master clock hardware divisor, so far applied only together with the pixel clock divisor in a single operation, will no longer be applied from ov6650_s_fmt(), apply it, still using a hardcoded value for now, from ov6650_prog_dflt() helper so hardware is still initialised correctly on device probe. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ov6650: Simplify clock divisor calculationJanusz Krzysztofik
As appears from an analysis of to_clkrc() helper code after its pclk_limit argument has been dropped, its result no longer depends on another argument - pclk_max. Moreover, assuming that a constant value of FRAME_RATE_MAX is always used as a denominator of the only significant argument left - a struct v4l2_fract, the result in fact depends only on the numerator value of that argument. As a further consequence, it no longer makes sense to recalculate frame intervals by converting them forth and back with a GET_CLKRC_DIV(to_clkrc(tpf)) construct. Drop use of GET_CLKRC_DIV() on results of to_clkrc() where possible - use the frame interval value directly. Furthermore, replace the to_clkrc() helper function with a simple macro and update its users to always use FRAME_RATE_MAX as frame interval denominator and pass only its numerator as an argument. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ov6650: Drop obsolete .pclk_limit attributeJanusz Krzysztofik
That attribute used to be obtained from platform data by a soc_camera host interface and passed to the sensor driver for .s_mbus_fmt() video operation callback, later reused as .set_fmt() pad operation callback, to be able to limit frame rate. The driver stored that value in its private structure for further use from .g/s_parm(), later converted to g/s_frame_interval(). On conversion of the driver from soc_camera sensor to a standalone V4L2 subdevice by commit 23a52386fabe ("media: ov6650: convert to standalone v4l2 subdevice"), that attribute had been replaced by a constant and hardcoded to an arbitrarily chosen pixel clock limit. Drop it. Host interfaces can limit frame rate if needed by calling .s_frame_interval(). Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ov6650: Fix stored frame interval not in sync with hardwareJanusz Krzysztofik
The driver stores a frame interval value supposed to be in line with hardware state in a device private structure. Since the driver initial submission, the respective field of the structure has never been initialised on device probe. Moreover, if updated from .s_frame_interval(), a new value is stored before it is applied on hardware. If an error occurs during device update, the stored value may no longer reflect hardware state and consecutive calls to .g_frame_interval() may return incorrect information. Assuming a failed update of the device means its actual state hasn't changed, update the frame interval field of the device private structure with a new value only after it is successfully applied on hardware so it always reflects actual hardware state to the extent possible. Also, initialise the field with hardware default frame interval on device probe. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: cec-gpio: Use CONFIG_PREEMPTIONSebastian Andrzej Siewior
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Switch the Kconfig dependency to CONFIG_PREEMPTION. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: i2c: adv7842: make array cri static and const, makes object smallerChristophe JAILLET
Don't populate the array 'cri' on the stack but instead make it static and const. Makes the object code smaller by 165 bytes. Turn the 2nd parameter of 'log_infoframe()' const accordingly. Before: text data bss dec hex filename 98533 20024 256 118813 1d01d drivers/media/i2c/adv7842.o After: text data bss dec hex filename 98304 20088 256 118648 1cf78 drivers/media/i2c/adv7842.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: gspca: remove redundant assignment to variable retColin Ian King
The variable ret is being initialized with a value that is never read and is being re-assigned a little later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ti-vpe: vpe: use r2y instead of y2r, copy-paste errorColin Ian King
There appears to be a copy-paste error on the access of csc_coeffs.y2r.r601.full.coeff, I believe csc_coeffs.2yr.r601.full.coeff should be used instead. This is a moot point as the code is never reached, but at least use the correct structure element. Addresses-Coverity: ("Copy-paste error") Fixes: 3ff3a712a9ea ("media: ti-vpe: vpe: don't rely on colorspace member for conversion") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: adv7180: Only print 'chip found' message on successful probeFabio Estevam
Currently the "chip found" message is shown even in the case where the I2C address is wrongly passed in the device tree, or also in the case of probe failure, which is misleading. To avoid such problem, move this message after real I2C transactions have been successfully made and we are certain that the adv7180 is really present and probed. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: usb: fix memory leak in af9005_identify_stateNavid Emamdoost
In af9005_identify_state when returning -EIO the allocated buffer should be released. Replace the "return -EIO" with assignment into ret and move deb_info() under a check. Fixes: af4e067e1dcf ("V4L/DVB (5625): Add support for the AF9005 demodulator from Afatech") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: cec-pin: add 'received' callbackHans Verkuil
Drivers that use the CEC pin framework have no way of processing messages themselves by providing the 'received' callback. This is present in cec_ops, but not in cec_pin_ops. Add support for this callback. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: aspeed: clear garbage interruptsJae Hyun Yoo
CAPTURE_COMPLETE and FRAME_COMPLETE interrupts come even when these are disabled in the VE_INTERRUPT_CTRL register and eventually this behavior causes disabling irq itself like below: [10055.108784] irq 23: nobody cared (try booting with the "irqpoll" option) [10055.115525] CPU: 0 PID: 331 Comm: swampd Tainted: G W 5.3.0-4fde000-dirty-d683e2e #1 [10055.124565] Hardware name: Generic DT based system [10055.129355] Backtrace: [10055.131854] [<80107d7c>] (dump_backtrace) from [<80107fb0>] (show_stack+0x20/0x24) [10055.139431] r7:00000017 r6:00000001 r5:00000000 r4:9d51dc00 [10055.145120] [<80107f90>] (show_stack) from [<8074bf50>] (dump_stack+0x20/0x28) [10055.152361] [<8074bf30>] (dump_stack) from [<80150ffc>] (__report_bad_irq+0x40/0xc0) [10055.160109] [<80150fbc>] (__report_bad_irq) from [<80150f2c>] (note_interrupt+0x23c/0x294) [10055.168374] r9:015b6e60 r8:00000000 r7:00000017 r6:00000001 r5:00000000 r4:9d51dc00 [10055.176136] [<80150cf0>] (note_interrupt) from [<8014df1c>] (handle_irq_event_percpu+0x88/0x98) [10055.184835] r10:7eff7910 r9:015b6e60 r8:00000000 r7:9d417600 r6:00000001 r5:00000002 [10055.192657] r4:9d51dc00 r3:00000000 [10055.196248] [<8014de94>] (handle_irq_event_percpu) from [<8014df64>] (handle_irq_event+0x38/0x4c) [10055.205113] r5:80b56d50 r4:9d51dc00 [10055.208697] [<8014df2c>] (handle_irq_event) from [<80151f1c>] (handle_level_irq+0xbc/0x12c) [10055.217037] r5:80b56d50 r4:9d51dc00 [10055.220623] [<80151e60>] (handle_level_irq) from [<8014d4b8>] (generic_handle_irq+0x30/0x44) [10055.229052] r5:80b56d50 r4:00000017 [10055.232648] [<8014d488>] (generic_handle_irq) from [<8014d524>] (__handle_domain_irq+0x58/0xb4) [10055.241356] [<8014d4cc>] (__handle_domain_irq) from [<801021e4>] (avic_handle_irq+0x68/0x70) [10055.249797] r9:015b6e60 r8:00c5387d r7:00c5387d r6:ffffffff r5:9dd33fb0 r4:9d402380 [10055.257539] [<8010217c>] (avic_handle_irq) from [<80101e34>] (__irq_usr+0x54/0x80) [10055.265105] Exception stack(0x9dd33fb0 to 0x9dd33ff8) [10055.270152] 3fa0: 015d0530 00000000 00000000 015d0538 [10055.278328] 3fc0: 015d0530 015b6e60 00000000 00000000 0052c5d0 015b6e60 7eff7910 7eff7918 [10055.286496] 3fe0: 76ce5614 7eff7908 0050e2f4 76a3a08c 20000010 ffffffff [10055.293104] r5:20000010 r4:76a3a08c [10055.296673] handlers: [10055.298967] [<79f218a5>] irq_default_primary_handler threaded [<1de88514>] aspeed_video_irq [10055.307344] Disabling IRQ #23 To fix this issue, this commit makes the interrupt handler clear these garbage interrupts. This driver enables and uses only COMP_COMPLETE interrupt instead for frame handling. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: aspeed: set hsync and vsync polarities to normal before starting mode ↵Jae Hyun Yoo
detection Sometimes it detects a weird resolution such as 1024x287 when the actual resolution is 1024x768. To resolve such an issue, this commit adds clearing for hsync and vsync polarity register bits at the beginning of the first mode detection. This is recommended in the datasheet. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: aspeed: refine hsync/vsync polarity setting logicJae Hyun Yoo
To prevent inaccurate detections of resolution, this commit enables clearing of hsync/vsync polarity bits based on probed sync state. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: v4l: Add definitions for HEVC stateless decodingPaul Kocialkowski
This introduces the required definitions for HEVC decoding support with stateless VPUs. The controls associated to the HEVC slice format provide the required meta-data for decoding slices extracted from the bitstream. They are not exported to the public V4L2 API since reworking this API will likely be needed for covering various use-cases and new hardware. Multi-slice decoding is exposed as a valid decoding mode to match current H.264 support but it is not yet implemented. The interface comes with the following limitations: * No custom quantization matrices (scaling lists); * Support for a single temporal layer only; * No slice entry point offsets support; * No conformance window support; * No VUI parameters support; * No support for SPS extensions: range, multilayer, 3d, scc, 4 bits; * No support for PPS extensions: range, multilayer, 3d, scc, 4 bits. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> [hverkuil-cisco@xs4all.nl: use 1ULL in flags defines in hevc-ctrls.h] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: vivid: Add metadata output supportVandana BN
Support metadata output in vivid driver. Metadata output is used to set brightness, contrast, saturation and hue. Adds new files for metadata output. Signed-off-by: Vandana BN <bnvandana@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: v4l2-core: Add new metadata formatVandana BN
Add new metadata format to support metadata output in vivid. Signed-off-by: Vandana BN <bnvandana@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: vivid: Add metadata capture supportVandana BN
This patch adds meatadata capture support in vivid driver. Adds new files for metadata capture. Adds vivid controls to generate PTS and SCR for metadata stream. also fixes v4l2-compliance issues seen on metadata device. Signed-off-by: Vandana BN <bnvandana@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: v4l2-dev: disable frequency and tuner ioctls for touchHans Verkuil
Touch devices have obviously no tuner, so don't attempt to enable those ioctls for such devices. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: v4l2-dev: fix is_tch checksHans Verkuil
Touch devices mark too many ioctls as valid. Restrict the list of valid ioctls for touch devices. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: v4l2-dev: simplify the SDR checksHans Verkuil
In determine_valid_ioctls() we can use SET_VALID_IOCTL to enable ioctls for SDR, simplifying the code. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: v4l2-core: correctly validate video and metadata ioctlsVandana BN
If the type is VFL_TYPE_GRABBER, then also check device_caps to see if the video device supports video and/or metadata and disable unneeded ioctls. Without this change, format ioctls for both video and metadata devices could be called on both device nodes. This is true for other ioctls as well, even if the device supports only video or metadata. Metadata devices act similar to VBI devices w.r.t. which ioctls should be enabled. This makes sense since VBI *is* metadata. Signed-off-by: Vandana BN <bnvandana@gmail.com> Co-developed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-23compat_ioctl: move more drivers to compat_ptr_ioctlArnd Bergmann
The .ioctl and .compat_ioctl file operations have the same prototype so they can both point to the same function, which works great almost all the time when all the commands are compatible. One exception is the s390 architecture, where a compat pointer is only 31 bit wide, and converting it into a 64-bit pointer requires calling compat_ptr(). Most drivers here will never run in s390, but since we now have a generic helper for it, it's easy enough to use it consistently. I double-checked all these drivers to ensure that all ioctl arguments are used as pointers or are ignored, but are not interpreted as integer values. Acked-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: David Sterba <dsterba@suse.com> Acked-by: Darren Hart (VMware) <dvhart@infradead.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-10-23Merge v5.4-rc4 into drm-nextDaniel Vetter
Thierry needs fd70c7755bf0 ("drm/bridge: tc358767: fix max_tu_symbol value") to be able to merge his dp_link patch series. Some adjacent changes conflicts, plus some clashes in i915 due to cherry-picking and git trying to be helpful and leaving both versions in. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-10-21media: v4l2-mem2mem: add new_frame detectionHans Verkuil
Drivers that support VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF typically want to know if a new frame is started (i.e. the first slice is about to be processed). Add a new_frame bool to v4l2_m2m_ctx and set it accordingly. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-21media: v4l2-mem2mem: add stateless_(try_)decoder_cmd ioctl helpersJernej Skrabec
These helpers are used by stateless codecs when they support multiple slices per frame and hold capture buffer flag is set. It's expected that all such codecs will use this code. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Co-developed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-21media: v4l2-mem2mem: support held capture buffersHans Verkuil
Check for held buffers that are ready to be returned to vb2 in __v4l2_m2m_try_queue(). This avoids drivers having to handle this case. Add v4l2_m2m_buf_done_and_job_finish() to correctly return source and destination buffers and mark the job as finished while taking a held destination buffer into account (i.e. that buffer won't be returned). This has to be done while job_spinlock is held to avoid race conditions. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-21media: vb2: add V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUFHans Verkuil
This patch adds support for the V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF flag. It also adds a new V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF capability. Drivers should set vb2_queue->subsystem_flags to VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF to indicate support for this flag. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-16media: uvcvideo: Fix a typo in UVC_METATADA_BUF_SIZEChristophe JAILLET
It is likely that it should be UVC_METADATA_BUF_SIZE instead. Fix it and use it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-16media: uvcvideo: Fix error path in control parsing failureLaurent Pinchart
When parsing the UVC control descriptors fails, the error path tries to cleanup a media device that hasn't been initialised, potentially resulting in a crash. Fix this by initialising the media device before the error handling path can be reached. Fixes: 5a254d751e52 ("[media] uvcvideo: Register a v4l2_device") Reported-by: syzbot+c86454eb3af9e8a4da20@syzkaller.appspotmail.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-15 20:40:24 +0000