| Age | Commit message (Collapse) | Author |
|---|
|
Remove wrong EIO to EGAIN conversion and pass all errors as is.
After commit 230f3d53a547 ("i40e: remove i40e_status"), which should only
replace F/W specific error codes with Linux kernel generic, all EIO errors
suddenly started to be converted into EAGAIN which leads nvmupdate to retry
until it timeouts and sometimes fails after more than 20 minutes in the
middle of NVM update, so NVM becomes corrupted.
The bug affects users only at the time when they try to update NVM, and
only F/W versions that generate errors while nvmupdate. For example, X710DA2
with 0x8000ECB7 F/W is affected, but there are probably more...
Command for reproduction is just NVM update:
./nvmupdate64
In the log instead of:
i40e_nvmupd_exec_aq err I40E_ERR_ADMIN_QUEUE_ERROR aq_err I40E_AQ_RC_ENOMEM)
appears:
i40e_nvmupd_exec_aq err -EIO aq_err I40E_AQ_RC_ENOMEM
i40e: eeprom check failed (-5), Tx/Rx traffic disabled
The problematic code did silently convert EIO into EAGAIN which forced
nvmupdate to ignore EAGAIN error and retry the same operation until timeout.
That's why NVM update takes 20+ minutes to finish with the fail in the end.
Fixes: 230f3d53a547 ("i40e: remove i40e_status")
Co-developed-by: Kelvin Kang <kelvin.kang@intel.com>
Signed-off-by: Kelvin Kang <kelvin.kang@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240710224455.188502-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/act_ct.c
26488172b029 ("net/sched: Fix UAF when resolving a clash")
3abbd7ed8b76 ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the kernel's 'ethtool_keee' structure is in use, the internal
'eee_advert' field becomes pointless and can be removed.
This patch comes to clean up this redundant code.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Since the port representors are added one by one there is no need to do
eswitch rebuild. Each port representor is detached and attached in VF
reset path.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add support for driver-specific devlink local_forwarding param.
Supported values are "enabled", "disabled" and "prioritized".
Default configuration is set to "enabled".
Add documentation in networking/devlink/ice.rst.
In previous generations of Intel NICs the transmit scheduler was only
limited by PCIe bandwidth when scheduling/assigning hairpin-bandwidth
between VFs. Changes to E810 HW design introduced scheduler limitation,
so that available hairpin-bandwidth is bound to external port speed.
In order to address this limitation and enable NFV services such as
"service chaining" a knob to adjust the scheduler config was created.
Driver can send a configuration message to the FW over admin queue and
internal FW logic will reconfigure HW to prioritize and add more BW to
VF to VF traffic. An end result, for example, 10G port will no longer
limit hairpin-bandwidth to 10G and much higher speeds can be achieved.
Devlink local_forwarding param set to "prioritized" enables higher
hairpin-bandwitdh on related PFs. Configuration is applicable only to
8x10G and 4x25G cards.
Changing local_forwarding configuration will trigger CORER reset in
order to take effect.
Example command to change current value:
devlink dev param set pci/0000:b2:00.3 name local_forwarding \
value prioritized \
cmode runtime
Co-developed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Pawel Kaminski <pawel.kaminski@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Correct name of i40e_addr_to_hkey() in it's kdoc.
kernel-doc -none reports:
drivers/net/ethernet/intel/i40e/i40e.h:739: warning: expecting prototype for i40e_mac_to_hkey(). Prototype was for i40e_addr_to_hkey() instead
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
We are moving away from the Sourceforge email address. Rather than
removing or updating the email for the affected entries, remove the
MODULE_AUTHOR altogether as its usage is incorrect [1].
Link: https://lore.kernel.org/netdev/20200626115236.7f36d379@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1]
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com> # libeth, libie
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Track the number of rules and recipes added to switch. Add a tracepoint to
ice_aq_sw_rules(), which shows both rule and recipe count. This information
can be helpful when designing a set of rules to program to the hardware, as
it shows where the practical limit is. Actual limits are known (64 recipes,
32k rules), but it's hard to translate these values to how many rules the
*user* can actually create, because of extra metadata being implicitly
added, and recipe/rule chaining. Chaining combines several recipes/rules to
create a larger recipe/rule, so one large rule added by the user might
actually consume multiple rules from hardware perspective.
Rule counter is simply incremented/decremented in ice_aq_sw_rules(), since
all rules are added or removed via it.
Counting recipes is harder, as recipes can't be removed (only overwritten).
Recipes added via ice_aq_add_recipe() could end up being unused, when
there is an error in later stages of rule creation. Instead, track the
allocation and freeing of recipes, which should reflect the actual usage of
recipes (if something fails after recipe(s) were created, caller should
free them). Also, a number of recipes are loaded from NVM by default -
initialize the recipe counter with the number of these recipes on switch
initialization.
Example configuration:
cd /sys/kernel/tracing
echo function > current_tracer
echo ice_aq_sw_rules > set_ftrace_filter
echo ice_aq_sw_rules > set_event
echo 1 > tracing_on
cat trace
Example output:
tc-4097 [069] ...1. 787.595536: ice_aq_sw_rules <-ice_rem_adv_rule
tc-4097 [069] ..... 787.595705: ice_aq_sw_rules: rules=9 recipes=15
tc-4098 [057] ...1. 787.652033: ice_aq_sw_rules <-ice_add_adv_rule
tc-4098 [057] ..... 787.652201: ice_aq_sw_rules: rules=10 recipes=16
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove several members of struct ice_sw_recipe and struct
ice_prot_lkup_ext. Remove struct ice_recp_grp_entry and struct
ice_pref_recipe_group, since they are now unused as well.
All of the deleted members were only written to and never read, so it's
pointless to keep them.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently when creating switch recipes, switch ID is always added as the
first word in every recipe. There are only 5 words in a recipe, so one
word is always wasted. This is also true for the last recipe, which stores
result indexes (in case of chain recipes). Therefore the maximum usable
length of a chain recipe is 4 * 4 = 16 words. 4 words in a recipe, 4
recipes that can be chained (using a 5th one for result indexes).
Current max size chained recipe:
0: smmmm
1: smmmm
2: smmmm
3: smmmm
4: srrrr
Where:
s - switch ID
m - regular match (e.g. ipv4 src addr, udp dst port, etc.)
r - result index
Switch ID does not actually need to be present in every recipe, only in one
of them (in case of chained recipe). This frees up to 8 extra words:
3 from recipes in the middle (because first recipe still needs to have
switch ID), and 5 from one extra recipe (because now the last recipe also
does not have switch ID, so it can chain 1 more recipe).
Max size chained recipe after changes:
0: smmmm
1: Mmmmm
2: Mmmmm
3: Mmmmm
4: MMMMM
5: Rrrrr
Extra usable words available after this change are highlighted with capital
letters.
Changing how switch ID is added is not straightforward, because it's not a
regular lookup. Its FV index and mask can't be determined based on protocol
+ offset pair read from package and instead need to be added manually.
Additionally, change how result indexes are added. Currently they are
always inserted in a new recipe at the end. Example for 13 words, (with
above optimization, switch ID being one of the words):
0: smmmm
1: mmmmm
2: mmmxx
3: rrrxx
Where:
x - unused word
In this and some other cases, the result indexes can be moved just after
last matches because there are unused words, saving one recipe. Example
for 13 words after both optimizations:
0: smmmm
1: mmmmm
2: mmmrr
Note how one less result index is needed in this case, because the last
recipe does not need to "link" to itself.
There are cases when adding an additional recipe for result indexes cannot
be avoided. In that cases result indexes are all put in the last recipe.
Example for 14 words after both optimizations:
0: smmmm
1: mmmmm
2: mmmmx
3: rrrxx
With these two changes, recipes/rules are more space efficient, allowing
more to be created in total.
Co-developed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove root_buf from recipe struct. Its only usage was in ice_find_recp(),
where if recipe had an inverse action, it was skipped, but actually the
driver never adds inverse actions, so effectively it was pointless.
Without root_buf, the recipe data element in ice_add_sw_recipe() does
not need to be persistent and can also be automatically deallocated with
__free, which nicely simplifies unroll.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove unnecessary size checks when copying bitmaps in ice_add_sw_recipe()
and replace them with compile time assert. Check if the bitmaps are equal
size, as they are copied both ways.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The content of the first read recipe is used as a template when adding a
recipe. It isn't needed - only prune index is directly set from there. Set
it in the code instead. Also, now there's no need to set rid and lookup
indexes to 0, as the whole recipe buffer is initialized to 0.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove field_off as it's never used.
Remove done bitmap, as its value is only checked and never assigned.
Reusing sub-recipes while creating new root recipes is currently not
supported in the driver.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
To debug link issues in the field, serdes Tx/Rx equalizer values
help to determine the health of serdes lane.
Extend 'ethtool -d' option to dump serdes Tx/Rx equalizer.
The following list of equalizer param is supported
a. rx_equalization_pre2
b. rx_equalization_pre1
c. rx_equalization_post1
d. rx_equalization_bflf
e. rx_equalization_bfhf
f. rx_equalization_drate
g. tx_equalization_pre1
h. tx_equalization_pre3
i. tx_equalization_atten
j. tx_equalization_post1
k. tx_equalization_pre2
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anil Samal <anil.samal@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240709202951.2103115-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To debug link issues in the field, it is paramount to
dump fec corrected/uncorrected block counts from firmware.
Firmware requires PCS quad number and PCS port number to
read FEC statistics. Current driver implementation does
not maintain above physical properties of a port.
Add new driver API to derive physical properties of an input
port.These properties include PCS quad number, PCS port number,
serdes lane count, primary serdes lane number.
Extend ethtool option '--show-fec' to support fec statistics.
The IEEE standard mandates two sets of counters:
- 30.5.1.1.17 aFECCorrectedBlocks
- 30.5.1.1.18 aFECUncorrectableBlocks
Standard defines above statistics per lane but current
implementation supports total FEC statistics per port
i.e. sum of all lane per port. Find sample output below
FEC parameters for ens21f0np0:
Supported/Configured FEC encodings: Auto RS BaseR
Active FEC encoding: RS
Statistics:
corrected_blocks: 0
uncorrectable_blocks: 0
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anil Samal <anil.samal@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240709202951.2103115-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current driver implementation for Sideband Queue supports a
fixed flag (ICE_AQ_FLAG_RD). To retrieve FEC statistics from
firmware, Sideband Queue command is used with a different flag.
Extend API for Sideband Queue command to use 'flags' as input
argument.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anil Samal <anil.samal@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240709202951.2103115-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 861e8086029e ("e1000e: move force SMBUS from enable ulp function
to avoid PHY loss issue") resolved a PHY access loss during suspend on
Meteor Lake consumer platforms, but it affected corporate systems
incorrectly.
A better fix, working for both consumer and corporate systems, was
proposed in commit bfd546a552e1 ("e1000e: move force SMBUS near the end
of enable_ulp function"). However, it introduced a regression on older
devices, such as [8086:15B8], [8086:15F9], [8086:15BE].
This patch aims to fix the secondary regression, by limiting the scope of
the changes to Meteor Lake platforms only.
Fixes: bfd546a552e1 ("e1000e: move force SMBUS near the end of enable_ulp function")
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218940
Reported-by: Dieter Mummenschanz <dmummenschanz@web.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218936
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240709203123.2103296-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
idpf uses Page Pool for data buffers with hardcoded buffer lengths of
4k for "classic" buffers and 2k for "short" ones. This is not flexible
and does not ensure optimal memory usage. Why would you need 4k buffers
when the MTU is 1500?
Use libeth for the data buffers and don't hardcode any buffer sizes. Let
them be calculated from the MTU for "classics" and then divide the
truesize by 2 for "short" ones. The memory usage is now greatly reduced
and 2 buffer queues starts make sense: on frames <= 1024, you'll recycle
(and resync) a page only after 4 HW writes rather than two.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently, idpf uses the following model for the header buffers:
* buffers are allocated via dma_alloc_coherent();
* when receiving, napi_alloc_skb() is called and then the header is
copied to the newly allocated linear part.
This is far from optimal as DMA coherent zone is slow on many systems
and memcpy() neutralizes the idea and benefits of the header split. Not
speaking of that XDP can't be run on DMA coherent buffers, but at the
same time the idea of allocating an skb to run XDP program is ill.
Instead, use libeth to create page_pools for the header buffers, allocate
them dynamically and then build an skb via napi_build_skb() around them
with no memory copy. With one exception...
When you enable header split, you expect you'll always have a separate
header buffer, so that you could reserve headroom and tailroom only
there and then use full buffers for the data. For example, this is how
TCP zerocopy works -- you have to have the payload aligned to PAGE_SIZE.
The current hardware running idpf does *not* guarantee that you'll
always have headers placed separately. For example, on my setup, even
ICMP packets are written as one piece to the data buffers. You can't
build a valid skb around a data buffer in this case.
To not complicate things and not lose TCP zerocopy etc., when such thing
happens, use the empty header buffer and pull either full frame (if it's
short) or the Ethernet header there and build an skb around it. GRO
layer will pull more from the data buffer later. This W/A will hopefully
be removed one day.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Unlike previous generations, idpf requires more buffer types for optimal
performance. This includes: header buffers, short buffers, and
no-overhead buffers (w/o headroom and tailroom, for TCP zerocopy when
the header split is enabled).
Introduce libeth Rx buffer type and calculate page_pool params
accordingly. All the HW-related details like buffer alignment are still
accounted. For the header buffers, pick 256 bytes as in most places in
the kernel (have you ever seen frames with bigger headers?).
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Page Pool Ethtool stats are deprecated since the Netlink Page Pool
interface introduction.
idpf receives big changes in Rx buffer management, including &page_pool
layout, so keeping these deprecated stats does only harm, not speaking
of that CONFIG_IDPF selects CONFIG_PAGE_POOL_STATS unconditionally,
while the latter is often turned off for better performance.
Remove all the references to PP stats from the Ethtool code. The stats
are still available in their full via the generic Netlink interface.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
idpf's in-kernel parsed ptype structure is almost identical to the one
used in the previous Intel drivers, which means it can be converted to
use libeth's definitions and even helpers. The only difference is that
it doesn't use a constant table (libie), rather than one obtained from
the device.
Remove the driver counterpart and use libeth's helpers for hashes and
checksums. This slightly optimizes skb fields processing due to faster
checks. Also don't define big static array of ptypes in &idpf_vport --
allocate them dynamically. The pointer to it is anyway cached in
&idpf_rx_queue.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently, all HW supporting idpf supports the singleq model, but none
of it advertises it by default, as splitq is supported and preferred
for multiple reasons. Still, this almost dead code often times adds
hotpath branches and redundant cacheline accesses.
While it can't currently be removed, add CONFIG_IDPF_SINGLEQ and build
the singleq code only when it's enabled manually. This corresponds to
-10 Kb of object code size and a good bunch of hotpath checks.
idpf_is_queue_model_split() works as a gate and compiles out to `true`
when the config option is disabled.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It makes no sense to have a second &net_device_ops struct (800 bytes of
rodata) with only one difference in .ndo_start_xmit, which can easily
be just one `if`. This `if` is a drop in the ocean and you won't see
any difference.
Define unified idpf_xmit_start(). The preparation for sending is the
same, just call either idpf_tx_splitq_frame() or idpf_tx_singleq_frame()
depending on the active model to actually map and send the skb.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Now that the queue and queue vector structures are separated and laid
out optimally, group the fields as read-mostly, read-write, and cold
cachelines and add size assertions to make sure new features won't push
something out of its place and provoke perf regression.
Despite looking innocent, this gives up to 2% of perf bump on Rx.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
With CONFIG_MAXSMP, sizeof(cpumask_t) is 1 Kb. The queue vector
structure has them embedded, which means 1 additional Kb of not
really hotpath data.
We have cpumask_var_t, which is either an embedded cpumask or a pointer
for allocating it dynamically when it's big. Use it instead of plain
cpumasks and put &idpf_q_vector on a good diet.
Also remove redundant pointer to the interrupt name from the structure.
request_irq() saves it and free_irq() returns it on deinit, so that you
can free the memory.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently, sizeof(struct idpf_queue) is 32 Kb.
This is due to the 12-bit hashtable declaration at the end of the queue.
This HT is needed only for Tx queues when the flow scheduling mode is
enabled. But &idpf_queue is unified for all of the queue types,
provoking excessive memory usage.
The unified structure in general makes the code less effective via
suboptimal fields placement. You can't avoid that unless you make unions
each 2 fields. Even then, different field alignment etc., doesn't allow
you to optimize things to the limit.
Split &idpf_queue into 4 structures corresponding to the queue types:
RQ (Rx queue), SQ (Tx queue), FQ (buffer queue), and CQ (completion
queue). Place only needed fields there and shortcuts handy for hotpath.
Allocate the abovementioned hashtable dynamically and only when needed,
keeping &idpf_tx_queue relatively short (192 bytes, same as Rx). This HT
is used only for OOO completions, which aren't really hotpath anyway.
Note that this change must be done atomically, otherwise it's really
easy to get lost and miss something.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In C, we have structures and unions.
Casting `void *` via macros is not only error-prone, but also looks
confusing and awful in general.
In preparation for splitting the queue structs, replace it with a
union and direct array dereferences.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The commit 6533e558c650 ("i40e: Fix reset path while removing
the driver") introduced a new PF state "__I40E_IN_REMOVE" to block
modifying the XDP program while the driver is being removed.
Unfortunately, such a change is useful only if the ".ndo_bpf()"
callback was called out of the rmmod context because unloading the
existing XDP program is also a part of driver removing procedure.
In other words, from the rmmod context the driver is expected to
unload the XDP program without reporting any errors. Otherwise,
the kernel warning with callstack is printed out to dmesg.
Example failing scenario:
1. Load the i40e driver.
2. Load the XDP program.
3. Unload the i40e driver (using "rmmod" command).
The example kernel warning log:
[ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.002726] Call Trace:
[ +0.002457] <TASK>
[ +0.002119] ? __warn+0x80/0x120
[ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005586] ? report_bug+0x164/0x190
[ +0.003678] ? handle_bug+0x3c/0x80
[ +0.003503] ? exc_invalid_op+0x17/0x70
[ +0.003846] ? asm_exc_invalid_op+0x1a/0x20
[ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870
[ +0.005586] unregister_netdevice_queue+0xf7/0x140
[ +0.004806] unregister_netdev+0x1c/0x30
[ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e]
[ +0.004604] i40e_remove+0x1a1/0x420 [i40e]
[ +0.004220] pci_device_remove+0x3f/0xb0
[ +0.003943] device_release_driver_internal+0x19f/0x200
[ +0.005243] driver_detach+0x48/0x90
[ +0.003586] bus_remove_driver+0x6d/0xf0
[ +0.003939] pci_unregister_driver+0x2e/0xb0
[ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e]
[ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310
[ +0.005153] do_syscall_64+0x85/0x170
[ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220
[ +0.004886] ? do_syscall_64+0x95/0x170
[ +0.003851] ? exc_page_fault+0x7e/0x180
[ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79
[ +0.005064] RIP: 0033:0x7f59dc9347cb
[ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83
c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48
[ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb
[ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748
[ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000
[ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000
[ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000
[ +0.007151] </TASK>
[ +0.002204] ---[ end trace 0000000000000000 ]---
Fix this by checking if the XDP program is being loaded or unloaded.
Then, block only loading a new program while "__I40E_IN_REMOVE" is set.
Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP
callback to avoid unnecessary operations and checks.
Fixes: 6533e558c650 ("i40e: Fix reset path while removing the driver")
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240708230750.625986-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/aquantia/aquantia.h
219343755eae ("net: phy: aquantia: add missing include guards")
61578f679378 ("net: phy: aquantia: add support for PHY LEDs")
drivers/net/ethernet/wangxun/libwx/wx_hw.c
bd07a9817846 ("net: txgbe: remove separate irq request for MSI and INTx")
b501d261a5b3 ("net: txgbe: add FDIR ATR support")
https://lore.kernel.org/all/20240703112936.483c1975@canb.auug.org.au/
include/linux/mlx5/mlx5_ifc.h
048a403648fc ("net/mlx5: IFC updates for changing max EQs")
99be56171fa9 ("net/mlx5e: SHAMPO, Re-enable HW-GRO")
https://lore.kernel.org/all/20240701133951.6926b2e3@canb.auug.org.au/
Adjacent changes:
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
4130c67cd123 ("wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference")
3f3126515fbe ("wifi: iwlwifi: mvm: add mvm-specific guard")
include/net/mac80211.h
816c6bec09ed ("wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP")
5a009b42e041 ("wifi: mac80211: track changes in AP's TPE")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Do not use _test_bit() macro for testing bit. The proper macro for this
is one without underline.
_test_bit() is what test_bit() was prior to const-optimization. It
directly calls arch_test_bit(), i.e. the arch-specific implementation
(or the generic one). It's strictly _internal_ and shouldn't be used
anywhere outside the actual test_bit() macro.
test_bit() is a wrapper which checks whether the bitmap and the bit
number are compile-time constants and if so, it calls the optimized
function which evaluates this call to a compile-time constant as well.
If either of them is not a compile-time constant, it just calls _test_bit().
test_bit() is the actual function to use anywhere in the kernel.
IOW, calling _test_bit() avoids potential compile-time optimizations.
The sensors is not a compile-time constant, thus most probably there
are no object code changes before and after the patch.
But anyway, we shouldn't call internal wrappers instead of
the actual API.
Fixes: 4da71a77fc3b ("ice: read internal temperature sensor")
Acked-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver receives requests for configuring pins via the .enable
callback of the PTP clock object. These requests come into the driver
with flags which modify the requested behavior from userspace. Current
implementation in ice does not reject flags that it doesn't support.
This causes the driver to incorrectly apply requests with such flags as
PTP_PEROUT_DUTY_CYCLE, or any future flags added by the kernel which it
is not yet aware of.
Fix this by properly validating flags in both ice_ptp_cfg_perout and
ice_ptp_cfg_extts. Ensure that we check by bit-wise negating supported
flags rather than just checking and rejecting known un-supported flags.
This is preferable, as it ensures better compatibility with future
kernels.
Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ice_ptp_extts_event() function can race with ice_ptp_release() and
result in a NULL pointer dereference which leads to a kernel panic.
Panic occurs because the ice_ptp_extts_event() function calls
ptp_clock_event() with a NULL pointer. The ice driver has already
released the PTP clock by the time the interrupt for the next external
timestamp event occurs.
To fix this, modify the ice_ptp_extts_event() function to check the
PTP state and bail early if PTP is not ready.
Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extts events are disabled and enabled by the application ts2phc.
However, in case where the driver is removed when the application is
running, a specific extts event remains enabled and can cause a kernel
crash.
As a side effect, when the driver is reloaded and application is started
again, remaining extts event for the channel from a previous run will
keep firing and the message "extts on unexpected channel" might be
printed to the user.
To avoid that, extts events shall be disabled when PTP is released.
Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On vPro systems, the configuration of the I219-LM to achieve power
gating and S0ix residency is split between the driver and the CSME FW.
It was discovered that in some scenarios, where the network cable is
connected and then disconnected, S0ix residency is not always reached.
This was root-caused to a subset of I219-LM register writes that are not
performed by the CSME FW. Therefore, the driver should perform these
register writes on corporate setups, regardless of the CSME FW state.
This was discovered on Meteor Lake systems; however it is likely to
appear on other platforms as well.
Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218589
Signed-off-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240628201754.2744221-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allocate and initialize struct ice_adapter object only once per physical
card instead of once per port. This is not a big deal by now, but we want
to extend this struct more and more in the near future. Our plans include
PTP stuff and a devlink instance representing whole-device/physical card.
Transactions requiring to be sleep-able (like those doing user (here ice)
memory allocation) must be performed with an additional (on top of xarray)
mutex. Adding it here removes need to xa_lock() manually.
Since this commit is a reimplementation of ice_adapter_get(), a rather new
scoped_guard() wrapper for locking is used to simplify the logic.
It's worth to mention that xa_insert() use gives us both slot reservation
and checks if it is already filled, what simplifies code a tiny bit.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Admin queue command for shutdown AQ contains a flag to indicate driver
unload. However, the flag is always set in the driver, even for resets. It
can cause the firmware to consider driver as unloaded once the PF reset is
triggered on all ports of device, which could lead to unexpected results.
Add an additional function parameter to functions that shutdown AQ,
indicating whether the driver is actually unloading.
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Allow the driver to be compatible with different FW API versions based
on the device's MAC type. Currently, E810 is only compatible with one
FW API version. Now the driver can be compatible with different FW API
versions for both E810 and E830. For example, E810 FW API version is
1.5.0 and E830 is 1.7.0.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Check the return value from ice_vsi_rebuild() and prevent the usage of
incorrectly configured VSI.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Eric Joyner <eric.joyner@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Changing the MAC address of the VFs is currently unsupported via devlink.
Add the function handlers to set and get the HW address for the VFs.
Signed-off-by: Karthik Sundaravel <ksundara@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling")
d9c04209990b ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TC queues needs to be correctly updated when the number of queues on
a VSI is reconfigured, so netdev's queue and TC settings will be
dynamically adjusted and could accurately represent the underlying
hardware state after changes to the VSI queue counts.
Fixes: 0754d65bd4be ("ice: Add infrastructure for mqprio support via ndo_setup_tc")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case of reset of VF VSI can be reallocated. To handle this case it
should be properly updated.
Reload representor as vsi->vsi_num can be different than the one stored
when representor was created.
Instead of only changing antispoof do whole VSI configuration for
eswitch.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It is needed because subfunction port representor shouldn't configure
the source VSI during representor creation.
Move the code to separate function and call it only in case the VF port
representor is being created.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In case of subfunction lock will be taken for whole port creation and
removing. Do the same in VF case.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It is used to get representor structure during cleaning.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c10 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a89 ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To facilitate running PHY parametric tests, add support for the SIOCSMIIREG
ioctl. This allows a userspace application to write to the PHY registers
to enable the test modes.
Signed-off-by: Jackie Jone <jackie.jone@alliedtelesis.co.nz>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240618213330.982046-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Adding/updating VSI list rule, as well as allocating/freeing VSI list
resource are called several times with type ICE_SW_LKUP_LAST, which fails
because ice_update_vsi_list_rule() and ice_aq_alloc_free_vsi_list()
consider it invalid. Allow calling these functions with ICE_SW_LKUP_LAST.
This fixes at least one issue in switchdev mode, where the same rule with
different action cannot be added, e.g.:
tc filter add dev $PF1 ingress protocol arp prio 0 flower skip_sw \
dst_mac ff:ff:ff:ff:ff:ff action mirred egress redirect dev $VF1_PR
tc filter add dev $PF1 ingress protocol arp prio 0 flower skip_sw \
dst_mac ff:ff:ff:ff:ff:ff action mirred egress redirect dev $VF2_PR
Fixes: 0f94570d0cae ("ice: allow adding advanced rules")
Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240618210206.981885-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
