| Age | Commit message (Collapse) | Author |
|---|
|
We need the driver core and sysfs fixes in here to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts, no adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ice_aqc_opc_download_pkg (0x0C40) AQ sporadically returns error due
to FW issue. Fix this by retrying five times before moving to
Safe Mode. Sleep for 20 ms before retrying. This was tested with the
4.40 firmware.
Fixes: c76488109616 ("ice: Implement Dynamic Device Personalization (DDP) download")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit 24407a01e57c ("ice: Add 200G speed/phy type use") added support
for 200G PHY speeds, but did not include 200G link speed message
support. As a result the driver incorrectly reports Unknown for 200G
link speed.
Fix this by adding 200G support to ice_print_link_msg().
Fixes: 24407a01e57c ("ice: Add 200G speed/phy type use")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
A bug in https://bugzilla.kernel.org/show_bug.cgi?id=218906 describes
that irdma would break and report hardware initialization failed after
suspend/resume with Intel E810 NIC (tested on 6.9.0-rc5).
The problem is caused due to the collision between the irq numbers
requested in irdma and the irq numbers requested in other drivers
after suspend/resume.
The irq numbers used by irdma are derived from ice's ice_pf->msix_entries
which stores mappings between MSI-X index and Linux interrupt number.
It's supposed to be cleaned up when suspend and rebuilt in resume but
it's not, causing irdma using the old irq numbers stored in the old
ice_pf->msix_entries to request_irq() when resume. And eventually
collide with other drivers.
This patch fixes this problem. On suspend, we call ice_deinit_rdma() to
clean up the ice_pf->msix_entries (and free the MSI-X vectors used by
irdma if we've dynamically allocated them). On resume, we call
ice_init_rdma() to rebuild the ice_pf->msix_entries (and allocate the
MSI-X vectors if we would like to dynamically allocate them).
Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA")
Tested-by: Cyrus Lien <cyrus.lien@canonical.com>
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In the quest to make struct device constant, start by making
to_auxiliary_drv() return a constant pointer so that drivers that call
this can be fixed up before the driver core changes.
As the return type previously was not constant, also fix up all callers
that were assuming that the pointer was not going to be a constant one
in order to not break the build.
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Bingbu Cao <bingbu.cao@intel.com>
Cc: Tianshu Qiu <tian.shu.qiu@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Cc: Bard Liao <yung-chuan.liao@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: linux-media@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: intel-wired-lan@lists.osuosl.org
Cc: linux-rdma@vger.kernel.org
Cc: sound-open-firmware@alsa-project.org
Cc: linux-sound@vger.kernel.org
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> # drivers/media/pci/intel/ipu6
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20240611130103.3262749-7-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 86167183a17e03ec77198897975e9fdfbd53cb0b.
igc_ptp_init() needs to be called before igc_reset(), otherwise kernel
crash could be observed. Following the corresponding discussion [1] and
[2] revert this commit.
Link: https://lore.kernel.org/all/8fb634f8-7330-4cf4-a8ce-485af9c0a61a@intel.com/ [1]
Link: https://lore.kernel.org/all/87o78rmkhu.fsf@intel.com/ [2]
Fixes: 86167183a17e ("igc: fix a log entry using uninitialized netdev")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240611162456.961631-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Encapsulation control flags are currently not used anywhere,
so all flags are currently unsupported by all drivers.
This patch adds validation of this assumption, so that
encapsulation flags may be used in the future.
In case any encapsulation control flags are masked,
flow_rule_match_has_enc_control_flags() sets a NL extended
error message, and we return -EOPNOTSUPP.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/20240609173358.193178-6-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
irq_set_affinity_hint() is deprecated. Use irq_update_affinity_hint()
instead. This removes the side-effect of actually applying the affinity.
The driver does not really need to worry about spreading its IRQs across
CPUs. The core code already takes care of that.
On the contrary, when the driver applies affinities by itself, it breaks
the users' expectations:
1. The user configures irqbalance with IRQBALANCE_BANNED_CPULIST in
order to prevent IRQs from being moved to certain CPUs that run a
real-time workload.
2. ice reconfigures VSIs at runtime due to a MIB change
(ice_dcb_process_lldp_set_mib_change). Reopening a VSI resets the
affinity in ice_vsi_req_irq_msix().
3. ice has no idea about irqbalance's config, so it may move an IRQ to
a banned CPU. The real-time workload suffers unacceptable latency.
I am not sure if updating the affinity hints is at all useful, because
irqbalance ignores them since 2016 ([1]), but at least it's harmless.
This ice change is similar to i40e commit d34c54d1739c ("i40e: Use
irq_update_affinity_hint()").
[1] https://github.com/Irqbalance/irqbalance/commit/dcc411e7bfdd
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-3-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In ice_ptp_cfg_clkout(), the ice driver needs to calculate the nearest next
second of a current time value specified in nanoseconds. It implements this
using div64_u64, because the time value is a u64. It could use div_u64
since NSEC_PER_SEC is smaller than 32-bits.
Ideally this would be implemented directly with roundup(), but that can't
work on all platforms due to a division which requires using the specific
macros and functions due to platform restrictions, and to ensure that the
most appropriate and fast instructions are used.
The kernel doesn't currently provide any 64-bit equivalents for doing
roundup. Attempting to use roundup() on a 32-bit platform will result in a
link failure due to not having a direct 64-bit division.
The closest equivalent for this is DIV64_U64_ROUND_UP, which does a
division always rounding up. However, this only computes the division, and
forces use of the div64_u64 in cases where the divisor is a 32bit value and
could make use of div_u64.
Introduce DIV_U64_ROUND_UP based on div_u64, and then use it to implement
roundup_u64 which takes a u64 input value and a u32 rounding value.
The name roundup_u64 matches the naming scheme of div_u64, and future
patches could implement roundup64_u64 if they need to round by a multiple
that is greater than 32-bits.
Replace the logic in ice_ptp.c which does this equivalent with the newly
added roundup_u64.
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-2-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-1-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/pensando/ionic/ionic_txrx.c
d9c04209990b ("ionic: Mark error paths in the data path as unlikely")
491aee894a08 ("ionic: fix kernel panic in XDP_TX action")
net/ipv6/ip6_fib.c
b4cb4a1391dc ("net: use unrcu_pointer() helper")
b01e1c030770 ("ipv6: fix possible race in __fib6_drop_pcpu_from()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit 01cf893bf0f4 ("net: intel: i40e/igc: Remove setting Autoneg in
EEE capabilities") removed SUPPORTED_Autoneg field but left inappropriate
ethtool_keee structure initialization. When "ethtool --show <device>"
(get_eee) invoke, the 'ethtool_keee' structure was accidentally overridden.
Remove the 'ethtool_keee' overriding and add EEE declaration as per IEEE
specification that allows reporting Energy Efficient Ethernet capabilities.
Examples:
Before fix:
ethtool --show-eee enp174s0
EEE settings for enp174s0:
EEE status: not supported
After fix:
EEE settings for enp174s0:
EEE status: disabled
Tx LPI: disabled
Supported EEE link modes: 100baseT/Full
1000baseT/Full
2500baseT/Full
Fixes: 01cf893bf0f4 ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-6-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ice_pf_dcb_recfg() re-maps queues to vectors with
ice_vsi_map_rings_to_vectors(), which does not restore the previous
state for XDP queues. This leads to no AF_XDP traffic after rebuild.
Map XDP queues to vectors in ice_vsi_map_rings_to_vectors().
Also, move the code around, so XDP queues are mapped independently only
through .ndo_bpf().
Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-5-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
has placed ice_vsi_free_q_vectors() after ice_destroy_xdp_rings() in
the rebuild process. The behaviour of the XDP rings config functions is
context-dependent, so the change of order has led to
ice_destroy_xdp_rings() doing additional work and removing XDP prog, when
it was supposed to be preserved.
Also, dependency on the PF state reset flags creates an additional,
fortunately less common problem:
* PFR is requested e.g. by tx_timeout handler
* .ndo_bpf() is asked to delete the program, calls ice_destroy_xdp_rings(),
but reset flag is set, so rings are destroyed without deleting the
program
* ice_vsi_rebuild tries to delete non-existent XDP rings, because the
program is still on the VSI
* system crashes
With a similar race, when requested to attach a program,
ice_prepare_xdp_rings() can actually skip setting the program in the VSI
and nevertheless report success.
Instead of reverting to the old order of function calls, add an enum
argument to both ice_prepare_xdp_rings() and ice_destroy_xdp_rings() in
order to distinguish between calls from rebuild and .ndo_bpf().
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-4-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Referenced commit has introduced a bitmap to distinguish between ZC and
copy-mode AF_XDP queues, because xsk_get_pool_from_qid() does not do this
for us.
The bitmap would be especially useful when restoring previous state after
rebuild, if only it was not reallocated in the process. This leads to e.g.
xdpsock dying after changing number of queues.
Instead of preserving the bitmap during the rebuild, remove it completely
and distinguish between ZC and copy-mode queues based on the presence of
a device associated with the pool.
Fixes: e102db780e1c ("ice: track AF_XDP ZC enabled queues in bitmap")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-3-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ice driver reads data from the Shadow RAM portion of the NVM during
initialization, including data used to identify the NVM image and device,
such as the ETRACK ID used to populate devlink dev info fw.bundle.
Currently it is using a fixed offset defined by ICE_CSS_HEADER_LENGTH to
compute the appropriate offset. This worked fine for E810 and E822 devices
which both have CSS header length of 330 words.
Other devices, including both E825-C and E830 devices have different sizes
for their CSS header. The use of a hard coded value results in the driver
reading from the wrong block in the NVM when attempting to access the
Shadow RAM copy. This results in the driver reporting the fw.bundle as 0x0
in both the devlink dev info and ethtool -i output.
The first E830 support was introduced by commit ba20ecb1d1bb ("ice: Hook up
4 E830 devices by adding their IDs") and the first E825-C support was
introducted by commit f64e18944233 ("ice: introduce new E825C devices
family")
The NVM actually contains the CSS header length embedded in it. Remove the
hard coded value and replace it with logic to read the length from the NVM
directly. This is more resilient against all existing and future hardware,
vs looking up the expected values from a table. It ensures the driver will
read from the appropriate place when determining the ETRACK ID value used
for populating the fw.bundle_id and for reporting in ethtool -i.
The CSS header length for both the active and inactive flash bank is stored
in the ice_bank_info structure to avoid unnecessary duplicate work when
accessing multiple words of the Shadow RAM. Both banks are read in the
unlikely event that the header length is different for the NVM in the
inactive bank, rather than being different only by the overall device
family.
Fixes: ba20ecb1d1bb ("ice: Hook up 4 E830 devices by adding their IDs")
Co-developed-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-2-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ice_get_pfa_module_tlv() function iterates over the Type-Length-Value
structures in the Preserved Fields Area (PFA) of the NVM. This is used by
the driver to access data such as the Part Board Assembly identifier.
The function uses simple logic to iterate over the PFA. First, the pointer
to the PFA in the NVM is read. Then the total length of the PFA is read
from the first word.
A pointer to the first TLV is initialized, and a simple loop iterates over
each TLV. The pointer is moved forward through the NVM until it exceeds the
PFA area.
The logic seems sound, but it is missing a key detail. The Preserved
Fields Area length includes one additional final word. This is documented
in the device data sheet as a dummy word which contains 0xFFFF. All NVMs
have this extra word.
If the driver tries to scan for a TLV that is not in the PFA, it will read
past the size of the PFA. It reads and interprets the last dummy word of
the PFA as a TLV with type 0xFFFF. It then reads the word following the PFA
as a length.
The PFA resides within the Shadow RAM portion of the NVM, which is
relatively small. All of its offsets are within a 16-bit size. The PFA
pointer and TLV pointer are stored by the driver as 16-bit values.
In almost all cases, the word following the PFA will be such that
interpreting it as a length will result in 16-bit arithmetic overflow. Once
overflowed, the new next_tlv value is now below the maximum offset of the
PFA. Thus, the driver will continue to iterate the data as TLVs. In the
worst case, the driver hits on a sequence of reads which loop back to
reading the same offsets in an endless loop.
To fix this, we need to correct the loop iteration check to account for
this extra word at the end of the PFA. This alone is sufficient to resolve
the known cases of this issue in the field. However, it is plausible that
an NVM could be misconfigured or have corrupt data which results in the
same kind of overflow. Protect against this by using check_add_overflow
when calculating both the maximum offset of the TLVs, and when calculating
the next_tlv offset at the end of each loop iteration. This ensures that
the driver will not get stuck in an infinite loop when scanning the PFA.
Fixes: e961b679fb0b ("ice: add board identifier info to devlink .info_get")
Co-developed-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-1-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The core code now provides a mechanism to convert the ART base clock to the
corresponding TSC value without requiring an architecture specific
function.
Replace the direct conversion by filling in the required data.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240513103813.5666-8-lakshmi.sowjanya.d@intel.com
|
|
The core code now provides a mechanism to convert the ART base clock to the
corresponding TSC value without requiring an architecture specific
function.
Replace the direct conversion by filling in the required data.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240513103813.5666-5-lakshmi.sowjanya.d@intel.com
|
|
The core code now provides a mechanism to convert the ART base clock to the
corresponding TSC value without requiring an architecture specific
function.
Replace the direct conversion by filling in the required data.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240513103813.5666-4-lakshmi.sowjanya.d@intel.com
|
|
>From FW/HW perspective, 2 port topology in E825C devices requires
merging of 2 port mapping internally and breakout mapping externally.
As a consequence, it requires different port numbering from PTP code
perspective.
For that topology, pf_id can not be used to index PTP ports. Even if
the 2nd port is identified as port with pf_id = 1, all PHY operations
need to be performed as it was port 2. Thus, special mapping is needed
for the 2nd port.
This change adds detection of 2x50G topology and applies 'custom'
mapping on the 2nd port.
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-11-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new device capability ICE_AQC_CAPS_NAC_TOPOLOGY which allows to
determine the mode of operation (1 or 2 NAC).
Define a new structure to store data from new capability and
corresponding parser code.
Co-developed-by: Prathisna Padmasanan <prathisna.padmasanan@intel.com>
Signed-off-by: Prathisna Padmasanan <prathisna.padmasanan@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Pawel Kaminski <pawel.kaminski@intel.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-10-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The CGU layout of E825-C is a little different than E822/E823. Add
support the new hardware adding relevant functions.
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-9-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify the code by using anonymous struct in CGU registers instead of
naming each structure 'field'.
Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-8-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
E825C products feature a new PHY model - ETH56G.
Introduces all necessary PHY definitions, functions etc. for ETH56G PHY,
analogous to E82X and E810 ones with addition of a few HW-specific
functionalities for ETH56G like one-step timestamping.
It ensures correct PTP initialization and operation for E825C products.
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Co-developed-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-7-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new helper for getting base clock increment value for specific HW.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-6-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move CGU block to the beginning of ice_ptp_hw.c
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-5-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a possibility to mark all transmitted/received timestamps as invalid
by clearing PHY OFFSET_READY registers.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-4-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce functions enabling/disabling Tx TS interrupts
for the E822 and ETH56G PHYs
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-3-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multiple places in the driver code need to convert enum ice_ptp_tmr_cmd
values into register bits for both the main timer and the PHY port
timers. The main MAC register has one bit scheme for timer commands,
while the PHY commands use a different scheme.
The E810 and E830 devices use the same scheme for port commands as used
for the main timer. However, E822 and ETH56G hardware has a separate
scheme used by the PHY.
Introduce helper functions to convert the timer command enumeration into
the register values, reducing some code duplication, and making it
easier to later refactor the individual port write commands.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-2-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create new ice_ptp_hw struct and use it for all HW and PTP-related
fields from struct ice_hw.
Replace definitions with struct fields, which values are set accordingly
to a specific device.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-1-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On module load, the ice driver checks for the lack of a specific PF
capability to determine if it should reduce the number of devlink params
to register. One situation when this test returns true is when the
driver loads in safe mode. The same check is not present on the unload
path when devlink params are unregistered. This results in the driver
triggering a WARN_ON in the kernel devlink code.
The current check and code path uses a reduction in the number of elements
reported in the list of params. This is fragile and not good for future
maintaining.
Change the parameters to be held in two lists, one always registered and
one dependent on the check.
Add a symmetrical check in the unload path so that the correct parameters
are unregistered as well.
Fixes: 109eb2917284 ("ice: Add tx_scheduling_layers devlink param")
CC: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-8-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 24407a01e57c ("ice: Add 200G speed/phy type use") added support
for 200G PHY speeds, but did not include the mapping of 200G PHY types
to link speed. As a result the driver is returning UNKNOWN link speed
when setting 200G ethtool advertised link modes.
To fix this add 200G PHY types to link speed mapping to
ice_get_link_speed_based_on_phy_type().
Fixes: 24407a01e57c ("ice: Add 200G speed/phy type use")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-5-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When EEH events occurs, the callback functions in the i40e, which are
managed by the EEH driver, will completely suspend and resume all IO
operations.
- In the PCI error detected callback, replaced i40e_prep_for_reset()
with i40e_io_suspend(). The change is to fully suspend all I/O
operations
- In the PCI error slot reset callback, replaced pci_enable_device_mem()
with pci_enable_device(). This change enables both I/O and memory of
the device.
- In the PCI error resume callback, replaced i40e_handle_reset_warning()
with i40e_io_resume(). This change allows the system to resume I/O
operations
Fixes: a5f3d2c17b07 ("powerpc/pseries/pci: Add MSI domains")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Robert Thomas <rob.thomas@ibm.com>
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-3-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Two new functions, i40e_io_suspend() and i40e_io_resume(), have been
introduced. These functions were factored out from the existing
i40e_suspend() and i40e_resume() respectively. This factoring was
done due to concerns about the logic of the I40E_SUSPENSED state, which
caused the device to be unable to recover. The functions are now used
in the EEH handling for device suspend/resume callbacks.
The function i40e_enable_mc_magic_wake() has been moved ahead of
i40e_io_suspend() to ensure it is declared before being used.
Tested-by: Robert Thomas <rob.thomas@ibm.com>
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-2-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit 861e8086029e ("e1000e: move force SMBUS from enable ulp
function to avoid PHY loss issue") introduces a regression on
PCH_MTP_I219_LM18 (PCIID: 0x8086550A). Without the referred commit, the
ethernet works well after suspend and resume, but after applying the
commit, the ethernet couldn't work anymore after the resume and the
dmesg shows that the NIC link changes to 10Mbps (1000Mbps originally):
[ 43.305084] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 10 Mbps Full Duplex, Flow Control: Rx/Tx
Without the commit, the force SMBUS code will not be executed if
"return 0" or "goto out" is executed in the enable_ulp(), and in my
case, the "goto out" is executed since FWSM_FW_VALID is set. But after
applying the commit, the force SMBUS code will be ran unconditionally.
Here move the force SMBUS code back to enable_ulp() and put it
immediately ahead of hw->phy.ops.release(hw), this could allow the
longest settling time as possible for interface in this function and
doesn't change the original code logic.
The issue was found on a Lenovo laptop with the ethernet hw as below:
00:1f.6 Ethernet controller [0200]: Intel Corporation Device [8086:550a]
(rev 20).
And this patch is verified (cable plug and unplug, system suspend
and resume) on Lenovo laptops with ethernet hw: [8086:550a],
[8086:550b], [8086:15bb], [8086:15be], [8086:1a1f], [8086:1a1c] and
[8086:0dc7].
Fixes: 861e8086029e ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-1-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ice_vsi_add_vlan() function is used to add a VLAN filter for the target
VSI. This function prepares a filter in the switch table for the given VSI.
If it succeeds, the vsi->num_vlan counter is incremented.
It is not considered an error to add a VLAN which already exists in the
switch table, so the function explicitly checks and ignores -EEXIST. The
vsi->num_vlan counter is still incremented.
This seems incorrect, as it means we can double-count in the case where the
same VLAN is added twice by the caller. The actual table will have one less
filter than the count.
The ice_vsi_del_vlan() function similarly checks and handles the -ENOENT
condition for when deleting a filter that doesn't exist. This flow only
decrements the vsi->num_vlan if it actually deleted a filter.
The vsi->num_vlan counter is used only in a few places, primarily related
to tracking the number of non-zero VLANs. If the vsi->num_vlans gets out of
sync, then ice_vsi_num_non_zero_vlans() will incorrectly report more VLANs
than are present, and ice_vsi_has_non_zero_vlans() could return true
potentially in cases where there are only VLAN 0 filters left.
Fix this by only incrementing the vsi->num_vlan in the case where we
actually added an entry, and not in the case where the entry already
existed.
Fixes: a1ffafb0b4a4 ("ice: Support configuring the device to Double VLAN Mode")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-2-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, idpf enables NAPI and interrupts prior to allocating Rx
buffers.
This may lead to frame loss (there are no buffers to place incoming
frames) and even crashes on quick ifup-ifdown. Interrupts must be
enabled only after all the resources are here and available.
Split interrupt init into two phases: initialization and enabling,
and perform the second only after the queues are fully initialized.
Note that we can't just move interrupt initialization down the init
process, as the queues must have correct a ::q_vector pointer set
and NAPI already added in order to allocate buffers correctly.
Also, during the deinit process, disable HW interrupts first and
only then disable NAPI. Otherwise, there can be a HW event leading
to napi_schedule(), but the NAPI will already be unavailable.
Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Reported-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-1-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Quite smaller than usual. Notably it includes the fix for the unix
regression from the past weeks. The TCP window fix will require some
follow-up, already queued.
Current release - regressions:
- af_unix: fix garbage collection of embryos
Previous releases - regressions:
- af_unix: fix race between GC and receive path
- ipv6: sr: fix missing sk_buff release in seg6_input_core
- tcp: remove 64 KByte limit for initial tp->rcv_wnd value
- eth: r8169: fix rx hangup
- eth: lan966x: remove ptp traps in case the ptp is not enabled
- eth: ixgbe: fix link breakage vs cisco switches
- eth: ice: prevent ethtool from corrupting the channels
Previous releases - always broken:
- openvswitch: set the skbuff pkt_type for proper pmtud support
- tcp: Fix shift-out-of-bounds in dctcp_update_alpha()
Misc:
- a bunch of selftests stabilization patches"
* tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (25 commits)
r8169: Fix possible ring buffer corruption on fragmented Tx packets.
idpf: Interpret .set_channels() input differently
ice: Interpret .set_channels() input differently
nfc: nci: Fix handling of zero-length payload packets in nci_rx_work()
net: relax socket state check at accept time.
tcp: remove 64 KByte limit for initial tp->rcv_wnd value
net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()
tls: fix missing memory barrier in tls_init
net: fec: avoid lock evasion when reading pps_enable
Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI"
testing: net-drv: use stats64 for testing
net: mana: Fix the extra HZ in mana_hwc_send_request
net: lan966x: Remove ptp traps in case the ptp is not enabled.
openvswitch: Set the skbuff pkt_type for proper pmtud support.
selftest: af_unix: Make SCM_RIGHTS into OOB data.
af_unix: Fix garbage collection of embryos carrying OOB with SCM_RIGHTS
tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
selftests/net: use tc rule to filter the na packet
ipv6: sr: fix memleak in seg6_hmac_init_algo
af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock.
...
|
|
Unlike ice, idpf does not check, if user has requested at least 1 combined
channel. Instead, it relies on a check in the core code. Unfortunately, the
check does not trigger for us because of the hacky .set_channels()
interpretation logic that is not consistent with the core code.
This naturally leads to user being able to trigger a crash with an invalid
input. This is how:
1. ethtool -l <IFNAME> -> combined: 40
2. ethtool -L <IFNAME> rx 0 tx 0
combined number is not specified, so command becomes {rx_count = 0,
tx_count = 0, combined_count = 40}.
3. ethnl_set_channels checks, if there is at least 1 RX and 1 TX channel,
comparing (combined_count + rx_count) and (combined_count + tx_count)
to zero. Obviously, (40 + 0) is greater than zero, so the core code
deems the input OK.
4. idpf interprets `rx 0 tx 0` as 0 channels and tries to proceed with such
configuration.
The issue has to be solved fundamentally, as current logic is also known to
cause AF_XDP problems in ice [0].
Interpret the command in a way that is more consistent with ethtool
manual [1] (--show-channels and --set-channels) and new ice logic.
Considering that in the idpf driver only the difference between RX and TX
queues forms dedicated channels, change the correct way to set number of
channels to:
ethtool -L <IFNAME> combined 10 /* For symmetric queues */
ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */
[0] https://lore.kernel.org/netdev/20240418095857.2827-1-larysa.zaremba@intel.com/
[1] https://man7.org/linux/man-pages/man8/ethtool.8.html
Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A bug occurs because a safety check guarding AF_XDP-related queues in
ethnl_set_channels(), does not trigger. This happens, because kernel and
ice driver interpret the ethtool command differently.
How the bug occurs:
1. ethtool -l <IFNAME> -> combined: 40
2. Attach AF_XDP to queue 30
3. ethtool -L <IFNAME> rx 15 tx 15
combined number is not specified, so command becomes {rx_count = 15,
tx_count = 15, combined_count = 40}.
4. ethnl_set_channels checks, if there are any AF_XDP of queues from the
new (combined_count + rx_count) to the old one, so from 55 to 40, check
does not trigger.
5. ice interprets `rx 15 tx 15` as 15 combined channels and deletes the
queue that AF_XDP is attached to.
Interpret the command in a way that is more consistent with ethtool
manual [0] (--show-channels and --set-channels).
Considering that in the ice driver only the difference between RX and TX
queues forms dedicated channels, change the correct way to set number of
channels to:
ethtool -L <IFNAME> combined 10 /* For symmetric queues */
ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */
[0] https://man7.org/linux/man-pages/man8/ethtool.8.html
Fixes: 87324e747fde ("ice: Implement ethtool ops for channels")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit 565736048bd5f9888990569993c6b6bfdf6dcb6d.
According to the commit, it implements a manual AN-37 for some
"troublesome" Juniper MX5 switches. This appears to be a workaround for a
particular switch.
It has been reported that this causes a severe breakage for other switches,
including a Cisco 3560CX-12PD-S.
The code appears to be a workaround for a specific switch which fails to
link in SFI mode. It expects to see AN-37 auto negotiation in order to
link. The Cisco switch is not expecting AN-37 auto negotiation. When the
device starts the manual AN-37, the Cisco switch decides that the port is
confused and stops attempting to link with it. This persists until a power
cycle. A simple driver unload and reload does not resolve the issue, even
if loading with a version of the driver which lacks this workaround.
The authors of the workaround commit have not responded with
clarifications, and the result of the workaround is complete failure to
connect with other switches.
This appears to be a case where the driver can either "correctly" link with
the Juniper MX5 switch, at the cost of bricking the link with the Cisco
switch, or it can behave properly for the Cisco switch, but fail to link
with the Junipir MX5 switch. I do not know enough about the standards
involved to clearly determine whether either switch is at fault or behaving
incorrectly. Nor do I know whether there exists some alternative fix which
corrects behavior with both switches.
Revert the workaround for the Juniper switch.
Fixes: 565736048bd5 ("ixgbe: Manual AN-37 for troublesome link partners for X550 SFI")
Link: https://lore.kernel.org/netdev/cbe874db-9ac9-42b8-afa0-88ea910e1e99@intel.com/T/
Link: https://forum.proxmox.com/threads/intel-x553-sfp-ixgbe-no-go-on-pve8.135129/#post-612291
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Daly <jeffd@silicom-usa.com>
Cc: kernel.org-fo5k2w@ycharbi.fr
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240520-net-2024-05-20-revert-silicom-switch-workaround-v1-1-50f80f261c94@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- optimize DMA sync calls when they are no-ops (Alexander Lobakin)
- fix swiotlb padding for untrusted devices (Michael Kelley)
- add documentation for swiotb (Michael Kelley)
* tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping:
dma: fix DMA sync for drivers not calling dma_set_mask*()
xsk: use generic DMA sync shortcut instead of a custom one
page_pool: check for DMA sync shortcut earlier
page_pool: don't use driver-set flags field directly
page_pool: make sure frag API fields don't span between cachelines
iommu/dma: avoid expensive indirect calls for sync operations
dma: avoid redundant calls for sync operations
dma: compile-out DMA sync op calls when not used
iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices
swiotlb: remove alloc_size argument to swiotlb_tbl_map_single()
Documentation/core-api: add swiotlb documentation
|
|
Disabling tcp-data-split on idpf silently fails:
# ethtool -G $NETDEV tcp-data-split off
# ethtool -g $NETDEV | grep 'TCP data split'
TCP data split: on
But it works if you also change 'tx' or 'rx':
# ethtool -G $NETDEV tcp-data-split off tx 256
# ethtool -g $NETDEV | grep 'TCP data split'
TCP data split: off
The bug is in idpf_set_ringparam, where it takes a shortcut out if the
TX and RX sizes are not changing. Fix it by checking also if the
tcp-data-split setting remains unchanged. Only then can the soft reset
be skipped.
Fixes: 9b1aa3ef2328 ("idpf: add get/set for Ethtool's header split ringparam")
Reported-by: Xu Du <xudu@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-36182
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20240515092414.158079-1-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge in late fixes to prepare for the 6.10 net-next PR.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, the driver assumed that all signature segments would contain
one or more buffers to download. In the future, there will be signature
segments that will contain no buffers to download.
Correct download flow to allow for signature segments that have zero
download buffers and skip the download in this case.
Fixes: 3cbdb0343022 ("ice: Add support for E830 DDP package segment")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240508171908.2760776-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PCI_HEADER_TYPE_MULTIFUNC is define by e1000e and ixgbe and both are
unused. There is already PCI_HEADER_TYPE_MFD in pci_regs.h anyway which
should be used instead so remove the duplicated defines of it.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
During successful probe, igc logs this:
[ 5.133667] igc 0000:01:00.0 (unnamed net_device) (uninitialized): PHC added
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The reason is that igc_ptp_init() is called very early, even before
register_netdev() has been called. So the netdev_info() call works
on a partially uninitialized netdev.
Fix this by calling igc_ptp_init() after register_netdev(), right
after the media autosense check, just as in igb. Add a comment,
just as in igb.
Now the log message is fine:
[ 5.200987] igc 0000:01:00.0 eth0: PHC added
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
