summaryrefslogtreecommitdiff
path: root/drivers/net/ieee802154
AgeCommit message (Collapse)Author
2014-10-29mac802154: add IEEE802154_HW_ARET hw flagAlexander Aring
This patch adds a new IEEE802154_HW_ARET hardware flag for indicating that the transceiver supports ARET handling. Also remove the IEEE802154_HW_FRAME_RETRIES from IEEE802154_HW_CSMA flag. Frame retries handling is part of ARET. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: remove might_sleep from driver layerAlexander Aring
This patch removes all might_sleep calls from driver layer. This handling is already done by mac802154 layer. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: ops: declare channel and page as u8Alexander Aring
The range of channel and page fits into an unsigned byte range. This patch changes the set_channel parameter definitions for channel and page to u8. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: declare struct ieee802154_ops as constAlexander Aring
The ieee802154_ops structure should be never changed during runtime. This patch declare this structure as const to avoid a runtime change. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27at86rf230: improve receive handlingAlexander Aring
Current behaviour it to copy the frame inclusive CRC into a skb, then remove the CRC from the skb. This patch optimizes this by not copying the CRC at the first place. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27at86rf230: use ieee802154_is_valid_psdu_len helperAlexander Aring
This patch adds the ieee802154_is_valid_psdu_len function to validate the psdu length. If the psdu length is invalid we use the maximum payload to receive also corrupted frames in monitor mode. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27ieee802154: drivers: use dev_alloc_skbAlexander Aring
This patch change the allocation of skb inside the ieee802154 driver layer to dev_alloc_skb. This changes also the gfp mask to GFP_ATOMIC which is needed for upcomming change that the receiving is done by a tasklet and not a workqueue anymore. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-26at86rf230: asynchronous xmit handlingAlexander Aring
This patch converts the sync xmit handling into an async xmit handling. The driver was already prepared for this step, all other drivers need more work to implement a xmit_async function. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-26mac802154: tx: add support for xmit_async callbackAlexander Aring
This patch renames the existsing xmit callback to xmit_sync and introduces an asynchronous xmit_async function. If ieee802154_ops doesn't provide the xmit_async callback, then we have a fallback to the xmit_sync callback. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25ieee802154: rename ieee802154_dev to ieee802154_hwAlexander Aring
The identical struct of the wireless stack implementation is named ieee80211_hw. This is useful to name the variable hw instead of get confusing with netdev dev variable. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25ieee802154: remove fakehard driverAlexander Aring
This patch removes the not functional fakehard driver. We don't support HardMAC 802.15.4 drivers right now. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25ieee802154: move ieee802154 headerAlexander Aring
This patch moves the ieee802154 header into include/linux instead include/net. Similar like wireless which have the ieee80211 header inside of include/linux. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25ieee802154: move wpan-phy.h to cfg802154.hAlexander Aring
The wpan-phy header contains the wpan_phy struct information. Later this header will be have similar function like cfg80211 header. The cfg80211 header contains the wiphy struct which is identically the wpan_phy struct inside 802.15.4 subsystem. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25mac802154: fix typo IEEE802515 to IEEE802154Alexander Aring
This patch fixs a typo in address filter defines from IEEE802515 to IEEE802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25ieee802154: mac802154: remove FSF addressAlexander Aring
This patch removes the FSF address in files which belongs to ieee802154 and mac802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: remove unnecessary print of async errorAlexander Aring
The async error function will already printout the errno over dev_err. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: fix enable_irq handling on async spiAlexander Aring
Sometimes the async state function is call in an context where the spi irq is diabled. This patch fix the handling to enable the irq when spi_async failed in the async state change calling chain. We do this by a context parameter irq_enable and evaluate this parameter when spi_async failed instead of returning spi_async errno. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: fix race conditionAlexander Aring
When the driver waits for a tx completion currently the driver direct enables the irq. When we switching to RX_AACK_ON some steps afterwards the driver could receive a new frame and request resources which are already in use, for example irq state change resource. To be sure there are no new interrupts when we switching to RX_AACK_ON, we enable the irq when state change to RX_AACK_ON was completed. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: add missing enable_irqAlexander Aring
This patch adds a missing enable_irq when spi_async in isr failed. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: squash unnecessary dereferencingAlexander Aring
This patch removes dereferencing irq number over spi struct. Instead we doing it directly over isr paramater. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: correct at86rf2xx lifs timingsAlexander Aring
Symbol rate is 16 us. Lifs is 40 symbols. 16 * 40 = 640 us. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: correct aret lifs and sifs handlingAlexander Aring
This patch adds lifs/sifs handling only if max_frame_retries is above zero. The at86rf2xx datasheets says nothing about phy lifs/sifs handling. I asked the atmel support and they said lifs/sifs is done by phy when max_frame_retries is above zero. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: add missing error handlingAlexander Aring
This patch adds an async error handling function if sync state change runs into a timeout. The async error handling function tries to recover the phy state machine into a valid state. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: fix errno on tx timeout handlingAlexander Aring
The rc variable is zero if we get a timeout. Instead of pass the rc variable to the async error handling function which try to recover the phy, we use a static -ETIMEDOUT errno. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25ieee802154: mrf24j40: Add support for MRF24J40MCSimon Vincent
The MRF24J40MC module has an external amplifier which should be enabled. The TX power has to be lowered to meet FCC regs. Signed-off-by: Simon Vincent <simon.vincent@xsilon.com> Acked-by: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-20net: ieee802154: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-24mrf24j40: use pr_* / dev_* instead of printk()Varka Bhadram
Replace printk() with dev_*() pr_*(). Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alan Ott <alan@signal11.us> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-09-24mrf24j40: remove unnecessary return statementVarka Bhadram
Remove the return statement in the void function. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alan Ott <alan@signal11.us> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-09-24mrf24j40: fix Missing a blank line after declarationsVarka Bhadram
Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alan Ott <alan@signal11.us> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-15net: set name_assign_type in alloc_netdev()Tom Gundersen
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07at86rf230: add new authorAlexander Aring
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07at86rf230: add sleep cycle timingAlexander Aring
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07at86rf230: add timing for channel switchAlexander Aring
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07at86rf230: rework reset to trx_off state changeAlexander Aring
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07at86rf230: rework state change and start/stopAlexander Aring
This patch removes the current synchron state change function and add a new function for a state assert. Change the start and stop callbacks to use this new synchron state change behaviour. It's a wrapper around the async state change function. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07at86rf230: rework irq_pol settingAlexander Aring
This patch rework the irq_pol register setting for rising and falling interrupt settings only. The default behaviour should be rising flag. Also use IRQ_TYPE_* defines instead of IRQF_* defines. There is no functionality change but irq_get_trigger_type returns IRQ_TYPE_* defines. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07at86rf230: move RX_SAFE_MODE setting to hw_initAlexander Aring
There is no need to set this bit in start callback which could be called more than once. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07at86rf230: rework transmit and receive handlingAlexander Aring
This patch is a complete reimplementation of transmit and receive handling for the at86rf230 driver. It solves also six bugs: First: The RX_SAFE_MODE is enabled and the transceiver doesn't leave the receive state while the framebuffer isn't read by a CMD_FB command. This is useful to read out the frame and don't get into another receive or transmit state, otherwise the frame would be overwritten. The current driver do twice CMD_FB calls, the first one leaves this protection. Second: Sometimes the CRC calculation is correct and the length field is greater 127. The current mac802154 layer and filter of a at86rf2xx doesn't check on this and the kernel crashes. In this case the frame is corrupted, we send the whole receive buffer to the next layer which can be useful for sniffing. Thrid: There is a undocumented race condition. When we are go into the RX_AACK_ON state the transceiver could be changed into RX_AACK_BUSY state. This is a normal behaviour. In this case the transceiver received a SHR while assert wasn't finished. Fourth: It also handle some more "correct" state changes. In aret mode the transceiver need to go to TX_ON before the transceiver go into RX_AACK_ON. Fifth: The programming model [0] describes also a error handling in ARET mode if the trac status is different than zero. This is patch adds support for handling this. Sixth: In receive handling the transceiver should also get the trac status according [0]. The driver could use the trac status as error statistic handling, but the driver doesn't use this currently. There is maybe some timing behaviour or the read of this register change some transceiver states. In addition the irqworker is removed. Instead we do async spi calls and no scheduling is involved anymore. The transmit function is also asynchron but with a wait_for_completion handling. The mac802154 layer doesn't support asynchron transmit handling right now. The state change behaviour is now changes, before it was: 1. assert while(!STATE_TRANSITION_IN_PROGRESS) 2. state change 3. assert while(!STATE_TRANSITION_IN_PROGRESS) 4. assert once(wanted state != current state) Sometimes a unexcepted state change occurs when 4. assert was violated. The new state change behaviour is: 1. assert while(!STATE_TRANSITION_IN_PROGRESS) 2. state change 3. wait state change timing according datasheet 4. assert once(wanted state != current state) This behaviour is described in the at86rf231 software programming model [0]. The state change documentation in this programming guide should also valid for at86rf212 and at86rf233 chips. The transceiver don't do a FORCE_TX_ON while we want to transmit a PDU. The new behaviour is a TX_ON and wait a receiving time (tFrame + tPAck). If we are still in RX_AACK_BUSY then we transmit a FORCE_TX_ON as timeout handling. The different is that FORCE_TX_ON aborts receiving and TX_ON waits if RX_AACK_BUSY is finished. This should decrease the drop rate of packets. [0] http://www.atmel.com/Images/AVR2022_swpm231-2.0.zip Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07at86rf230: add support for at86rf23x desenseAlexander Aring
To set the CCA_ED_THRES register the calculation for at86rf23x is different than for at86rf212. This patch adds a new callback for this calculation in chip data struct. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07at86rf230: remove is212 and add driver dataAlexander Aring
This patch adds a new at86rf2xx_chip_data structure which holds device specific attributes. Instead of runtime decisions "if (is212())" we set callbacks/attributes while device detection. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07at86rf230: rework detect device handlingAlexander Aring
This patch drops the current lowlevel spi calls for the detect device function instead we handle this via regmap. Also put the detection of in a seperate function and set all device specific attributes while detection. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07at86rf230: add regmap supportAlexander Aring
This patch adds regmap support for the at86rf230 driver and drop the lowlevel spi access functions and use the regmap access functions. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07mac802154: at86rf230: add hw flags and merge opsAlexander Aring
This patch adds new mac802154 hw flags for transmit power, csma and listen before transmit (lbt). These flags indicates that the transceiver supports these features. If the flags are set and the driver doesn't implement the necessary functions, then ieee802154_register_device returns -ENOSYS "Function not implemented". This patch merges also all at86rf230 operations into one operations structure and set the right hw flags for the at86rf230 transceivers. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2014-06-22ieee802154: cc2520: add driver to kernel build systemVarka Bhadram
Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-22ieee802154: cc2520: adds driver for TI CC2520 radioVarka Bhadram
This patch adds the driver support for the cc2520 radio. Driver support: - Tx and Rx of IEEE-802.15.4 packets - Energy Detection on channel - Setting the Channel for the radio. [b/w 11 - 26 channels] - Start and Stop the radio - h/w address filtering Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-22at86rf230: fix irq setupPhoebe Buckheister
Commit 8eba0eefae24953962067 ("at86rf230: remove irq_type in request_irq") removed the trigger configuration when requesting an irq, and instead relied on the interrupt trigger to be properly configured already. This does not seem to be an assumption that can be safely made, since boards disable all interrupt triggers on boot. On these boards, force the irq to trigger on rising edge, which is also the default for the chip. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-17mrf24j40: separate h/w init and add checkingsVarka Bhadram
separate the mrf24j40 hardware initialisation from probe() and adds the sanity checkings. These checkings are required if somebody hasn't a right spi configuration the probe function should fail. So we have to return from there. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11mrf24j40: add device managed APIsVarka Bhadram
adds the device managed APIs so that no need worry about freeing the resources. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-21ieee802154: Introduce the use of the managed version of kzallocHimangi Saraogi
This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions. An explicit linux/device.h include is added to make sure the devm_*() routine declarations are unambiguously available. The following Coccinelle semantic patch was used for making the change: @platform@ identifier p, probefn, removefn; @@ struct platform_driver p = { .probe = probefn, .remove = removefn, }; @prb@ identifier platform.probefn, pdev; expression e, e1, e2; @@ probefn(struct platform_device *pdev, ...) { <+... - e = kzalloc(e1, e2) + e = devm_kzalloc(&pdev->dev, e1, e2) ... ?-kfree(e); ...+> } @rem depends on prb@ identifier platform.removefn; expression e; @@ removefn(...) { <... - kfree(e); ...> } Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-18 17:34:03 +0000