summaryrefslogtreecommitdiff
path: root/drivers/net/usb
AgeCommit message (Collapse)Author
2023-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/usb/r8152.c be53771c87f4 ("r8152: add vendor/device ID pair for Microsoft Devkit") ec51fbd1b8a2 ("r8152: add USB device driver for config selection") https://lore.kernel.org/all/20230113113339.658c4723@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-12r8152: add vendor/device ID pair for Microsoft DevkitAndre Przywara
The Microsoft Devkit 2023 is a an ARM64 based machine featuring a Realtek 8153 USB3.0-to-GBit Ethernet adapter. As in their other machines, Microsoft uses a custom USB device ID. Add the respective ID values to the driver. This makes Ethernet work on the MS Devkit device. The chip has been visually confirmed to be a RTL8153. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20230111133228.190801-1-andre.przywara@arm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-09cdc_ether: no need to blacklist any r8152 devicesBjørn Mork
The r8152 driver does not need this anymore. Dropping blacklist entries adds optional support for these devices in ECM mode. The 8153 devices are handled by the r8153_ecm driver when in ECM mode, and must still be blacklisted here. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09r8152: add USB device driver for config selectionBjørn Mork
Subclassing the generic USB device driver to override the default configuration selection regardless of matching interface drivers. The r815x family devices expose a vendor specific function which the r8152 interface driver wants to handle. This is the preferred device mode. Additionally one or more USB class functions are usually supported for hosts lacking a vendor specific driver. The choice is USB configuration based, with one alternate function per configuration. Example device with both NCM and ECM alternate cfgs: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 3 P: Vendor=0bda ProdID=8156 Rev=31.00 S: Manufacturer=Realtek S: Product=USB 10/100/1G/2.5G LAN S: SerialNumber=001000001 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=256mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=r8152 E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=128ms C: #Ifs= 2 Cfg#= 2 Atr=a0 MxPwr=256mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver= E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=128ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver= I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver= E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms C: #Ifs= 2 Cfg#= 3 Atr=a0 MxPwr=256mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver= E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=128ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver= I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver= E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms A problem with this is that Linux will prefer class functions over vendor specific functions. Using the above example, Linux defaults to cfg #2, running the device in a sub-optimal NCM mode. Previously we've attempted to work around the problem by blacklisting the devices in the ECM class driver "cdc_ether", and matching on the ECM class function in the vendor specific interface driver. The latter has been used to switch back to the vendor specific configuration when the driver is probed for a class function. This workaround has several issues; - class driver blacklists is additional maintanence cruft in an unrelated driver - class driver blacklists prevents users from optionally running the devices in class mode - each device needs double match entries in the vendor driver - the initial probing as a class function slows down device discovery Now these issues have become even worse with the introduction of firmware supporting both NCM and ECM, where NCM ends up as the default mode in Linux. To use the same workaround, we now have to blacklist the devices in to two different class drivers and add yet another match entry to the vendor specific driver. This patch implements an alternative workaround strategy - independent of the interface drivers. It avoids adding a blacklist to the cdc_ncm driver and will let us remove the existing blacklist from the cdc_ether driver. As an additional bonus, removing the blacklists allow users to select one of the other device modes if wanted. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09usbnet: optimize usbnet_bh() to reduce CPU loadLeesoo Ahn
The current source pushes skb into dev-done queue by calling skb_dequeue_tail() and then pop it by skb_dequeue() to branch to rx_cleanup state for freeing urb/skb in usbnet_bh(). It takes extra CPU load, 2.21% (skb_queue_tail) as follows, - 11.58% 0.26% swapper [k] usbnet_bh - 11.32% usbnet_bh - 6.43% skb_dequeue 6.34% _raw_spin_unlock_irqrestore - 2.21% skb_queue_tail 2.19% _raw_spin_unlock_irqrestore - 1.68% consume_skb - 0.97% kfree_skbmem 0.80% kmem_cache_free 0.53% skb_release_data To reduce the extra CPU load use return values to call helper function usb_free_skb() to free the resources instead of calling skb_queue_tail() and skb_dequeue() for push and pop respectively. - 7.87% 0.25% swapper [k] usbnet_bh - 7.62% usbnet_bh - 4.81% skb_dequeue 4.74% _raw_spin_unlock_irqrestore - 1.75% consume_skb - 0.98% kfree_skbmem 0.78% kmem_cache_free 0.58% skb_release_data 0.53% smsc95xx_rx_fixup Signed-off-by: Leesoo Ahn <lsahn@ooseel.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-05net: usb: cdc_ether: add support for Thales Cinterion PLS62-W modemHui Wang
This modem has 7 interfaces, 5 of them are serial interfaces and are driven by cdc_acm, while 2 of them are wwan interfaces and are driven by cdc_ether: If 0: Abstract (modem) If 1: Abstract (modem) If 2: Abstract (modem) If 3: Abstract (modem) If 4: Abstract (modem) If 5: Ethernet Networking If 6: Ethernet Networking Without this change, the 2 network interfaces will be named to usb0 and usb1, our QA think the names are confusing and filed a bug on it. After applying this change, the name will be wwan0 and wwan1, and they could work well with modem manager. Signed-off-by: Hui Wang <hui.wang@canonical.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230105034249.10433-1-hui.wang@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-05Merge tag 'net-6.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, wifi, and netfilter. Current release - regressions: - bpf: fix nullness propagation for reg to reg comparisons, avoid null-deref - inet: control sockets should not use current thread task_frag - bpf: always use maximal size for copy_array() - eth: bnxt_en: don't link netdev to a devlink port for VFs Current release - new code bugs: - rxrpc: fix a couple of potential use-after-frees - netfilter: conntrack: fix IPv6 exthdr error check - wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes - eth: dsa: qca8k: various fixes for the in-band register access - eth: nfp: fix schedule in atomic context when sync mc address - eth: renesas: rswitch: fix getting mac address from device tree - mobile: ipa: use proper endpoint mask for suspend Previous releases - regressions: - tcp: add TIME_WAIT sockets in bhash2, fix regression caught by Jiri / python tests - net: tc: don't intepret cls results when asked to drop, fix oob-access - vrf: determine the dst using the original ifindex for multicast - eth: bnxt_en: - fix XDP RX path if BPF adjusted packet length - fix HDS (header placement) and jumbo thresholds for RX packets - eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf, avoid memory corruptions Previous releases - always broken: - ulp: prevent ULP without clone op from entering the LISTEN status - veth: fix race with AF_XDP exposing old or uninitialized descriptors - bpf: - pull before calling skb_postpull_rcsum() (fix checksum support and avoid a WARN()) - fix panic due to wrong pageattr of im->image (when livepatch and kretfunc coexist) - keep a reference to the mm, in case the task is dead - mptcp: fix deadlock in fastopen error path - netfilter: - nf_tables: perform type checking for existing sets - nf_tables: honor set timeout and garbage collection updates - ipset: fix hash:net,port,net hang with /0 subnet - ipset: avoid hung task warning when adding/deleting entries - selftests: net: - fix cmsg_so_mark.sh test hang on non-x86 systems - fix the arp_ndisc_evict_nocarrier test for IPv6 - usb: rndis_host: secure rndis_query check against int overflow - eth: r8169: fix dmar pte write access during suspend/resume with WOL - eth: lan966x: fix configuration of the PCS - eth: sparx5: fix reading of the MAC address - eth: qed: allow sleep in qed_mcp_trace_dump() - eth: hns3: - fix interrupts re-initialization after VF FLR - fix handling of promisc when MAC addr table gets full - refine the handling for VF heartbeat - eth: mlx5: - properly handle ingress QinQ-tagged packets on VST - fix io_eq_size and event_eq_size params validation on big endian - fix RoCE setting at HCA level if not supported at all - don't turn CQE compression on by default for IPoIB - eth: ena: - fix toeplitz initial hash key value - account for the number of XDP-processed bytes in interface stats - fix rx_copybreak value update Misc: - ethtool: harden phy stat handling against buggy drivers - docs: netdev: convert maintainer's doc from FAQ to a normal document" * tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits) caif: fix memory leak in cfctrl_linkup_request() inet: control sockets should not use current thread task_frag net/ulp: prevent ULP without clone op from entering the LISTEN status qed: allow sleep in qed_mcp_trace_dump() MAINTAINERS: Update maintainers for ptp_vmw driver usb: rndis_host: Secure rndis_query check against int overflow net: dpaa: Fix dtsec check for PCS availability octeontx2-pf: Fix lmtst ID used in aura free drivers/net/bonding/bond_3ad: return when there's no aggregator netfilter: ipset: Rework long task execution when adding/deleting entries netfilter: ipset: fix hash:net,port,net hang with /0 subnet net: sparx5: Fix reading of the MAC address vxlan: Fix memory leaks in error path net: sched: htb: fix htb_classify() kernel-doc net: sched: cbq: dont intepret cls results when asked to drop net: sched: atm: dont intepret cls results when asked to drop dt-bindings: net: marvell,orion-mdio: Fix examples dt-bindings: net: sun8i-emac: Add phy-supply property net: ipa: use proper endpoint mask for suspend selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier ...
2023-01-03usb: rndis_host: Secure rndis_query check against int overflowSzymon Heidrich
Variables off and len typed as uint32 in rndis_query function are controlled by incoming RNDIS response message thus their value may be manipulated. Setting off to a unexpectetly large value will cause the sum with len and 8 to overflow and pass the implemented validation step. Consequently the response pointer will be referring to a location past the expected buffer boundaries allowing information leakage e.g. via RNDIS_OID_802_3_PERMANENT_ADDRESS OID. Fixes: ddda08624013 ("USB: rndis_host, various cleanups") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-25treewide: Convert del_timer*() to timer_shutdown*()Steven Rostedt (Google)
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-07net: asix: add support for the Linux Automation GmbH USB 10Base-T1LOleksij Rempel
Add ASIX based USB 10Base-T1L adapter support: https://linux-automation.com/en/products/usb-t1l.html Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20221205132102.2941732-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-28net: usb: cdc_ether: add u-blox 0x1343 compositionDavide Tronchin
Add CDC-ECM support for LARA-L6. LARA-L6 module can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial interface and 1 CDC-ECM virtual network interface In CDC-ECM mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: CDC-ECM interface Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Link: https://lore.kernel.org/r/20221124112811.3548-1-davide.tronchin.94@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-23net/cdc_ncm: Fix multicast RX support for CDC NCM devices with ZLPSantiago Ruano Rincón
ZLP for DisplayLink ethernet devices was enabled in 6.0: 266c0190aee3 ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices"). The related driver_info should be the "same as cdc_ncm_info, but with FLAG_SEND_ZLP". However, set_rx_mode that enables handling multicast traffic was missing in the new cdc_ncm_zlp_info. usbnet_cdc_update_filter rx mode was introduced in linux 5.9 with: e10dcb1b6ba7 ("net: cdc_ncm: hook into set_rx_mode to admit multicast traffic") Without this hook, multicast, and then IPv6 SLAAC, is broken. Fixes: 266c0190aee3 ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices") Signed-off-by: Santiago Ruano Rincón <santiago.ruano-rincon@imt-atlantique.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-23net: usb: qmi_wwan: add u-blox 0x1342 compositionDavide Tronchin
Add RmNet support for LARA-L6. LARA-L6 module can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial interface and 1 CDC-ECM virtual network interface In RmNet mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: RMNET interface Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/linux/bpf.h 1f6e04a1c7b8 ("bpf: Fix offset calculation error in __copy_map_value and zero_map_value") aa3496accc41 ("bpf: Refactor kptr_off_tab into btf_record") f71b2f64177a ("bpf: Refactor map->off_arr handling") https://lore.kernel.org/all/20221114095000.67a73239@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17net: usb: smsc95xx: fix external PHY resetAlexandru Tachici
An external PHY needs settling time after power up or reset. In the bind() function an mdio bus is registered. If at this point the external PHY is still initialising, no valid PHY ID will be read and on phy_find_first() the bind() function will fail. If an external PHY is present, wait the maximum time specified in 802.3 45.2.7.1.1. Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221115114434.9991-2-alexandru.tachici@analog.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-17net: usb: qmi_wwan: add Telit 0x103a compositionEnrico Sau
Add the following Telit LE910C4-WWX composition: 0x103a: rmnet Signed-off-by: Enrico Sau <enrico.sau@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20221115105859.14324-1-enrico.sau@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-07net: remove explicit phylink_generic_validate() referencesRussell King (Oracle)
Virtually all conventional network drivers are now converted to use phylink_generic_validate() - only DSA drivers and fman_memac remain, so lets remove the necessity for network drivers to explicitly set this member, and default to phylink_generic_validate() when unset. This is possible as .validate must currently be set. Any remaining instances that have not been addressed by this patch can be fixed up later. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/E1or0FZ-001tRa-DI@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-03net: usb: Use kstrtobool() instead of strtobool()Christophe JAILLET
strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file (<linux/kstrtox.h>). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/d4432a67b6f769cac0a9ec910ac725298b64e102.1667336095.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-31drivers: net: convert to boolean for the mac_managed_pm flagDenis Kirjanov
Signed-off-by: Dennis Kirjanov <dkirjanov@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-07Merge tag 'tty-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...
2022-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in the left-over fixes before the net-next pull-request. Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c ae3ed15da588 ("net: ethernet: mtk_eth_soc: fix state in __mtk_foe_entry_clear") 9d8cb4c096ab ("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc") https://lore.kernel.org/all/6cb6893b-4921-a068-4c30-1109795110bb@tessares.net/ kernel/bpf/helpers.c 8addbfc7b308 ("bpf: Gate dynptr API behind CAP_BPF") 5679ff2f138f ("bpf: Move bpf_loop and bpf_for_each_map_elem under CAP_BPF") 8a67f2de9b1d ("bpf: expose bpf_strtol and bpf_strtoul to all program types") https://lore.kernel.org/all/20221003201957.13149-1-daniel@iogearbox.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03r8152: Rate limit overflow messagesAndrew Gaul
My system shows almost 10 million of these messages over a 24-hour period which pollutes my logs. Signed-off-by: Andrew Gaul <gaul@google.com> Link: https://lore.kernel.org/r/20221002034128.2026653-1-gaul@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-27net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455Frank Wunderlich
Add support for Dell 5811e (EM7455) with USB-id 0x413c:0x81c2. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Cc: stable@vger.kernel.org Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20220926150740.6684-3-linux@fw-web.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26usbnet: Fix memory leak in usbnet_disconnect()Peilin Ye
Currently usbnet_disconnect() unanchors and frees all deferred URBs using usb_scuttle_anchored_urbs(), which does not free urb->context, causing a memory leak as reported by syzbot. Use a usb_get_from_anchor() while loop instead, similar to what we did in commit 19cfe912c37b ("Bluetooth: btusb: Fix memory leak in play_deferred"). Also free urb->sg. Reported-and-tested-by: syzbot+dcd3e13cf4472f2e0ba1@syzkaller.appspotmail.com Fixes: 69ee472f2706 ("usbnet & cdc-ether: Autosuspend for online devices") Fixes: 638c5115a794 ("USBNET: support DMA SG") Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Link: https://lore.kernel.org/r/20220923042551.2745-1-yepeilin.cs@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-25Merge 7e2cd21e02b3 ("Merge tag 'tty-6.0-rc7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") into tty-next We need the tty fixes and api additions in this branch. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
drivers/net/ethernet/freescale/fec.h 7d650df99d52 ("net: fec: add pm_qos support on imx6q platform") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-06net: usb: qmi_wwan: add Quectel RM520Njerry.meng
add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry.meng <jerry-meng@foxmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-05Merge 6.0-rc4 into tty-nextGreg Kroah-Hartman
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-03r8152: Add MAC passthrough support for Lenovo Travel HubAndré Apitzsch
The Lenovo USB-C Travel Hub supports MAC passthrough. Signed-off-by: André Apitzsch <git@apitzsch.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31r8152: allow userland to disable multicastSven van Ashbrook
The rtl8152 driver does not disable multicasting when userspace asks it to. For example: $ ifconfig eth0 -multicast -allmulti $ tcpdump -p -i eth0 # will still capture multicast frames Fix by clearing the device multicast filter table when multicast and allmulti are both unset. Tested as follows: - Set multicast on eth0 network interface - verify that multicast packets are coming in: $ tcpdump -p -i eth0 - Clear multicast and allmulti on eth0 network interface - verify that no more multicast packets are coming in: $ tcpdump -p -i eth0 Signed-off-by: Sven van Ashbrook <svenva@chromium.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Link: https://lore.kernel.org/r/20220830045923.net-next.v1.1.I4fee0ac057083d4f848caf0fa3a9fd466fc374a0@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220830201457.7984-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-30tty: Make ->set_termios() old ktermios constIlpo Järvinen
There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220816115739.10928-9-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-27r8152: add PID for the Lenovo OneLink+ DockJean-Francois Le Fillatre
The Lenovo OneLink+ Dock contains an RTL8153 controller that behaves as a broken CDC device by default. Add the custom Lenovo PID to the r8152 driver to support it properly. Also, systems compatible with this dock provide a BIOS option to enable MAC address passthrough (as per Lenovo document "ThinkPad Docking Solutions 2017"). Add the custom PID to the MAC passthrough list too. Tested on a ThinkPad 13 1st gen with the expected results: passthrough disabled: Invalid header when reading pass-thru MAC addr passthrough enabled: Using pass-thru MAC addr XX:XX:XX:XX:XX:XX Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26r8152: add PID for the Lenovo OneLink+ DockJean-Francois Le Fillatre
The Lenovo OneLink+ Dock contains an RTL8153 controller that behaves as a broken CDC device by default. Add the custom Lenovo PID to the r8152 driver to support it properly. Also, systems compatible with this dock provide a BIOS option to enable MAC address passthrough (as per Lenovo document "ThinkPad Docking Solutions 2017"). Add the custom PID to the MAC passthrough list too. Tested on a ThinkPad 13 1st gen with the expected results: passthrough disabled: Invalid header when reading pass-thru MAC addr passthrough enabled: Using pass-thru MAC addr XX:XX:XX:XX:XX:XX Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26net: asix: ax88772: add ethtool pause configurationOleksij Rempel
Add phylink based ethtool pause configuration Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26net: asix: ax88772: migrate to phylinkOleksij Rempel
There are some exotic ax88772 based devices which may require functionality provide by the phylink framework. For example: - US100A20SFP, USB 2.0 auf LWL Converter with SFP Cage - AX88772B USB to 100Base-TX Ethernet (with RMII) demo board, where it is possible to switch between internal PHY and external RMII based connection. So, convert this driver to phylink as soon as possible. Tested with: - AX88772A + internal PHY - AX88772B + external DP83TD510E T1L PHY Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-22r8152: fix the RX FIFO settings when suspendingHayes Wang
The RX FIFO would be changed when suspending, so the related settings have to be modified, too. Otherwise, the flow control would work abnormally. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216333 Reported-by: Mark Blakeney <mark.blakeney@bullet-systems.net> Fixes: cdf0b86b250f ("r8152: fix a WOL issue") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-22r8152: fix the units of some registers for RTL8156AHayes Wang
The units of PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY are 16 bytes. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-11net: usb: qmi_wwan: Add support for Cinterion MV32Slark Xiao
There are 2 models for MV32 serials. MV32-W-A is designed based on Qualcomm SDX62 chip, and MV32-W-B is designed based on Qualcomm SDX65 chip. So we use 2 different PID to separate it. Test evidence as below: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f3 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F3 USB Mobile Broadband S: SerialNumber=d7b4be8d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f4 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F4 USB Mobile Broadband S: SerialNumber=d095087d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20220810014521.9383-1-slark_xiao@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-10Revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP"Jose Alonso
This reverts commit 36a15e1cb134c0395261ba1940762703f778438c. The usage of FLAG_SEND_ZLP causes problems to other firmware/hardware versions that have no issues. The FLAG_SEND_ZLP is not safe to use in this context. See: https://patchwork.ozlabs.org/project/netdev/patch/1270599787.8900.8.camel@Linuxdev4-laptop/#118378 The original problem needs another way to solve. Fixes: 36a15e1cb134 ("net: usb: ax88179_178a needs FLAG_SEND_ZLP") Cc: stable@vger.kernel.org Reported-by: Ronald Wahl <ronald.wahl@raritan.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216327 Link: https://bugs.archlinux.org/task/75491 Signed-off-by: Jose Alonso <joalonsof@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Conflicts: net/ax25/af_ax25.c d7c4c9e075f8c ("ax25: fix incorrect dev_tracker usage") d62607c3fe459 ("net: rename reference+tracking helpers") drivers/net/netdevsim/fib.c 180a6a3ee60a ("netdevsim: fib: Fix reference count leak on route deletion failure") 012ec02ae441 ("netdevsim: convert driver to use unlocked devlink API during init/fini") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-02net: usb: ax88179_178a: Bind only to vendor-specific interfaceHector Martin
The Anker PowerExpand USB-C to Gigabit Ethernet adapter uses this chipset, but exposes CDC Ethernet configurations as well as the vendor specific one. This driver tries to bind by PID:VID unconditionally and ends up picking up the CDC configuration, which is supposed to be handled by the class driver. To make things even more confusing, it sees both of the CDC class interfaces and tries to bind twice, resulting in two broken Ethernet devices. Change all the ID matches to specifically match the vendor-specific interface. By default the device comes up in CDC mode and is bound by that driver (which works fine); users may switch it to the vendor interface using sysfs to set bConfigurationValue, at which point the device actually goes through a reconnect cycle and comes back as a vendor specific only device, and then this driver binds and works too. The affected device uses VID/PID 0b95:1790, but we might as well change all of them for good measure, since there is no good reason for this driver to bind to standard CDC Ethernet interfaces. v3: Added VID/PID info to commit message Signed-off-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20220731072209.45504-1-marcan@marcan.st Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-02net: usb: make USB_RTL8153_ECM non user configurableMaciej Żenczykowski
This refixes: commit 7da17624e7948d5d9660b910f8079d26d26ce453 nt: usb: USB_RTL8153_ECM should not default to y In general, device drivers should not be enabled by default. which basically broke the commit it claimed to fix, ie: commit 657bc1d10bfc23ac06d5d687ce45826c760744f9 r8153_ecm: avoid to be prior to r8152 driver Avoid r8153_ecm is compiled as built-in, if r8152 driver is compiled as modules. Otherwise, the r8153_ecm would be used, even though the device is supported by r8152 driver. this commit amounted to: drivers/net/usb/Kconfig: +config USB_RTL8153_ECM + tristate "RTL8153 ECM support" + depends on USB_NET_CDCETHER && (USB_RTL8152 || USB_RTL8152=n) + default y + help + This option supports ECM mode for RTL8153 ethernet adapter, when + CONFIG_USB_RTL8152 is not set, or the RTL8153 device is not + supported by r8152 driver. drivers/net/usb/Makefile: -obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o r8153_ecm.o +obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o +obj-$(CONFIG_USB_RTL8153_ECM) += r8153_ecm.o And as can be seen it pulls a piece of the cdc_ether driver out into a separate config option to be able to make this piece modular in case cdc_ether is builtin, while r8152 is modular. While in general, device drivers should indeed not be enabled by default: this isn't a device driver per say, but rather this is support code for the CDCETHER (ECM) driver, and should thus be enabled if it is enabled. See also email thread at: https://www.spinics.net/lists/netdev/msg767649.html In: https://www.spinics.net/lists/netdev/msg768284.html Jakub wrote: And when we say "removed" we can just hide it from what's prompted to the user (whatever such internal options are called)? I believe this way we don't bring back Marek's complaint. Side note: these incorrect defaults will result in Android 13 on 5.15 GKI kernels lacking USB_RTL8153_ECM support while having USB_NET_CDCETHER (luckily we also have USB_RTL8150 and USB_RTL8152, so it's probably only an issue for very new RTL815x hardware with no native 5.15 driver). Fixes: 7da17624e7948d5d ("nt: usb: USB_RTL8153_ECM should not default to y") Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hayes Wang <hayeswang@realtek.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20220730230113.4138858-1-zenczykowski@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-28net: usb: delete extra space and tab in blank lineXie Shaowen
delete extra space and tab in blank line, there is no functional change. Signed-off-by: Xie Shaowen <studentxswpy@163.com> Link: https://lore.kernel.org/r/20220727081253.3043941-1-studentxswpy@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22net: usb: ax88179_178a: wol optimizationsJustin Chen
- Check if wol is supported on reset instead of everytime get_wol is called. - Save wolopts in private data instead of relying on the HW to save it. - Defer enabling WoL until suspend instead of enabling it everytime set_wol is called. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22net: usb: ax88179_178a: move priv to driver_privJustin Chen
We need more space to save WoL context. So lets allocate memory for ax88179_data instead of using struct usbnet data field which only supports 5 words. We continue to use the struct usbnet data field for multicast filters. However since we no longer have the private data stored there, we can shift it to the beginning. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22net: usb: ax88179_178a: restore state on resumeJustin Chen
The hardware state was only partially restored, which meant certain functionality was broken on resume. Do a full HW reset on resume to fix this. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-17 22:40:01 +0000