summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)Author
2025-01-10wifi: ath12k: Support pdev Puncture StatsRajat Soni
Add support to request pdev puncture stats from firmware through HTT stats type 46. These stats give the count of number of subbands used in different wifi standards. Sample output: ------------- echo 46 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 tx_ofdm_su_last_used_pattern_mask = 0x00000001 tx_ofdm_su_num_subbands_used_cnt_01 = 217 tx_ofdm_su_num_subbands_used_cnt_02 = 0 tx_ofdm_su_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 tx_ax_dl_mu_ofdma_last_used_pattern_mask = 0x00000000 tx_ax_dl_mu_ofdma_num_subbands_used_cnt_01 = 0 tx_ax_dl_mu_ofdma_num_subbands_used_cnt_02 = 0 tx_ax_dl_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 tx_be_dl_mu_ofdma_last_used_pattern_mask = 0x00000000 tx_be_dl_mu_ofdma_num_subbands_used_cnt_01 = 0 tx_be_dl_mu_ofdma_num_subbands_used_cnt_02 = 0 tx_be_dl_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 rx_ax_ul_mu_ofdma_last_used_pattern_mask = 0x00000000 rx_ax_ul_mu_ofdma_num_subbands_used_cnt_01 = 0 rx_ax_ul_mu_ofdma_num_subbands_used_cnt_02 = 0 rx_ax_ul_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 rx_be_ul_mu_ofdma_last_used_pattern_mask = 0x00000000 rx_be_ul_mu_ofdma_num_subbands_used_cnt_01 = 0 rx_be_ul_mu_ofdma_num_subbands_used_cnt_02 = 0 rx_be_ul_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Rajat Soni <quic_rajson@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241218035711.2573584-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-10wifi: ath12k: Support AST Entry StatsRoopni Devanathan
Add support to request Address Search Table(AST) entries stats from firmware through HTT stats type 41. These stats give AST entries related information such as software peer id, MAC address, pdev id, vdev, id, next hop, etc. Sample output: ------------- echo 41 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_AST_ENTRY_TLV: ast_index = 10 mac_addr = 00:00:00:01:00:00 sw_peer_id = 0 pdev_id = 3 vdev_id = 255 next_hop = 0 mcast = 0 monitor_direct = 0 mesh_sta = 0 mec = 0 intra_bss = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241218035711.2573584-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-10wifi: ath12k: Support Transmit Buffer OFDMA StatsPradeep Kumar Chitrapu
Add support to request OFDMA stats of transmit buffers from firmware through HTT stats type 32. These stats give information about NDPA, NDP, BRP and steering mechanisms. Note: WCN7850 firmware version - WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support HTT stats type 32. Sample output: ------------- echo 32 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TXBF_OFDMA_AX_NDPA_STATS_TLV: ax_ofdma_ndpa_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_ndpa_tried = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_NDP_STATS_TLV: ax_ofdma_ndp_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_ndp_tried = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_BRP_STATS_TLV: ax_ofdma_brpoll_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_brpoll_tied = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_STEER_STATS_TLV: ax_ofdma_num_ppdu_steer = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_num_usrs_prefetch = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_STEER_MPDU_STATS_TLV: rbo_steer_mpdus_tried = 0 rbo_steer_mpdus_failed = 0 sifs_steer_mpdus_tried = 0 sifs_steer_mpdus_failed = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <jjohnson@kernel.org> Link: https://patch.msgid.link/20241128110949.3672364-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-10wifi: ath12k: Support Transmit Rate Buffer StatsPradeep Kumar Chitrapu
Add support to request transmit rate buffer stats from firmware through HTT stats type 31. These stats give information such as MCS, NSS and bandwidth of transmit and input buffer. Sample output: ------------- echo 31 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_STATS_PDEV_TX_RATE_TXBF_STATS: Legacy OFDM Rates: 6 Mbps: 0, 9 Mbps: 0, 12 Mbps: 0, 18 Mbps: 0 24 Mbps: 0, 36 Mbps: 0, 48 Mbps: 0, 54 Mbps: 0 tx_ol_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_ibf_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_txbf_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_ol_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 tx_ibf_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 tx_txbf_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0 half_tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0 quarter_tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0 tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 half_tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 quarter_tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 half_tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 quarter_tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 HTT_STATS_PDEV_TXBF_FLAG_RETURN_STATS: TXBF_reason_code_stats: 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Acked-by: Jeff Johnson <jjohnson@kernel.org> Link: https://patch.msgid.link/20241128110949.3672364-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-07wifi: ath12k: fix tx power, max reg power update to firmwareSathishkumar Muruganandam
Currently, when the vdev start WMI cmd is sent from host, vdev related parameters such as max_reg_power, max_power, and max_antenna_gain are multiplied by 2 before being sent to the firmware. This is incorrect because the firmware uses 1 dBm steps for power calculations. This leads to incorrect power values being used in the firmware and radio, potentially causing incorrect behavior. Fix the update of max_reg_power, max_power, and max_antenna_gain values in the ath12k_mac_vdev_start_restart function, ensuring accurate power settings in the firmware by sending these values as-is, without multiplication. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by: Santhosh Ramesh <quic_santrame@quicinc.com> Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240909073049.3423035-1-quic_santrame@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-07wifi: ath12k: set flag for mgmt no-ack frames in Tx completionRamya Gnanasekar
IEEE80211_TX_STAT_NOACK_TRANSMITTED flag signifies that frame was successfully transmitted without any errors when no-ack is requested. In WMI Tx management completion path, driver is not setting IEEE80211_TX_STAT_NOACK_TRANSMITTED flag for the frames with IEEE80211_TX_CTL_NO_ACK. Without this flag, the management frame statistics will not track such frames. Add IEEE80211_TX_STAT_NOACK_TRANSMITTED flag as part of the flags in skb transmit information when WMI is processing Tx completion for management frames. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241219190845.605116-1-quic_msinada@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-07wifi: ath12k: Include MLO memory in firmware coredump collectionRaj Kumar Bhagat
The current firmware coredump collection in ath12k does not include the MLO_GLOBAL_MEM_REGION_TYPE memory. This memory region is essential for debugging issues related to Multi-Link Operation (MLO). Hence, add support to include MLO_GLOBAL_MEM_REGION_TYPE memory in firmware coredump collection. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241218040149.4041728-1-quic_rajkbhag@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-07wifi: ath12k: handle radar detection with MLOAditya Kumar Singh
ieee80211_radar_detected() expects the driver to pass a channel context configuration during MLO. This is used to identify exactly which link detected the radar. Add support to pass this to mac80211. Since the link arvif is not known in the WMI event, introduce a helper iterator API, ath12k_mac_get_any_chanctx_conf_iter(), to get the channel context configuration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241218-ath12k_mlo_dfs-v1-3-058e783bcfc7@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-07wifi: ath12k: fix CAC running state during virtual interface startAditya Kumar Singh
Currently, the DFS CAC time and the usable state of the primary channel in the channel definition are used to set the CAC_RUNNING flag for the ath12k radio structure. However, this approach is flawed because there are channel definitions where the primary channel is not a DFS channel, but the secondary channel is. For example, in 5 GHz band, channel 36 with 160 MHz bandwidth. In such cases, the flag is not set correctly and hence places where this flag is tested will not operate as expected. For example, Rx packets will not be dropped. To fix this issue, use the cfg80211_chandef_dfs_usable() function from cfg80211, which returns true if at least one channel is in a usable state. This will ensure the CAC_RUNNING flag is set properly. Additionally, update the CAC running debug log message to include the CAC time in milliseconds and also print the center frequency segment 1. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241218-ath12k_mlo_dfs-v1-2-058e783bcfc7@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-07wifi: ath12k: rename CAC_RUNNING flagAditya Kumar Singh
Rename the flag ATH12K_CAC_RUNNING to ATH12K_FLAG_CAC_RUNNING to correct the naming inconsistency in the enum ath12k_dev_flags. No functionality changes. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241218-ath12k_mlo_dfs-v1-1-058e783bcfc7@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-19wifi: ath12k: Fix spelling mistake "requestted" -> "requested"Colin Ian King
There is a spelling mistake in an ath12k_err error message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241217105505.306047-1-colin.i.king@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-19wifi: ath12k: Avoid explicit type cast in monitor status parse handlerKarthikeyan Periyasamy
Currently, monitor status parse procedure handles all the supported TLV tags. Each TLV tag has its own data structure for parsing. Now, this handler is passed the tlv_data as a u8 pointer, so explicit type cast conversion happens for every TLV tag parsing. Therefore, avoid the explicit type conversion by changing the tlv_data type from a u8 pointer to a const void pointer. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241217084511.2981515-9-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-19wifi: ath12k: Change the Tx monitor SRNG ring IDKarthikeyan Periyasamy
The Tx monitor SRNG ring ID does not align with the ath12k 802.11be hardware architecture. Currently, there is no issue since the Tx monitor is not enabled. However, in the future, the Tx monitor will be enabled. Therefore, change the HAL_SRNG_RING_ID_WMAC1_SW2TXMON_BUF0 SRNG ID and assign the correct start ring ID for the ring type HAL_TX_MONITOR_BUF. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241217084511.2981515-8-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-19wifi: ath12k: Remove unused HAL Rx mask in DP monitor pathKarthikeyan Periyasamy
Currently, CODING and TXBF are unused masks defined in the HAL Rx monitor status TLV parsing code path. Therefore, remove the unused masks to prevent incorrect assumptions for code readers. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241217084511.2981515-7-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-19wifi: ath12k: fix incorrect TID updation in DP monitor status pathKarthikeyan Periyasamy
Currently, an incorrect TID value gets populated in the monitor status Rx path due to an incorrect bitmap value given to the ffs() built-in helper function. Therefore, avoid the decrement and directly provide the TID bitmap to the ffs() built-in helper function for the correct TID update in the monitor status Rx path. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241217084511.2981515-6-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-19wifi: ath12k: Fix the misspelled of hal TLV tag HAL_PHYRX_GENERICHT_SIGKarthikeyan Periyasamy
There is "HAL_PHYRX_GENERICHT_SIG" misspelled as "HAL_PHYRX_GENERIC_EHT_SIG" in the comments. Fix the spelling. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241217084511.2981515-5-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-19wifi: ath12k: cleanup Rx peer statistics structureKarthikeyan Periyasamy
Currently, unused fields are present in the Rx peer statistics structure. These fields are already present in the same structure under the ath12k_rx_peer_rate_stats container structure. Therefore, remove the unused fields from the Rx peer statistics structure. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241217084511.2981515-4-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-19wifi: ath12k: Refactor monitor status TLV structureKarthikeyan Periyasamy
The following TLV structures and bitmask definitions were inherited from the ath11k but were not updated for the ath12k 802.11be hardware. These data structure and bitmask will be used to parse the monitor status TLV data in the Rx path. 1. hal_rx_ppdu_end_user_stats_ext structure 2. hal_rx_ppdu_end_duration structure 3. HAL_RX_HE_SIG_B2_OFDMA_INFO_INFO0_STA_TXBF bitmask 4. HAL_RX_MPDU_START_INFO1_PEERID bitmask 5. HAL_INVALID_PEERID 6. hal_rx_ppdu_end_user_stats bitmask Currently, there is no issue since the monitor status Rx path is not enabled. However, in the future, the monitor status Rx path will be enabled. Therefore, update the above TLV structures and bitmask to align with the ath12k 802.11be hardware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241217084511.2981515-3-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-19wifi: ath12k: Add documentation HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFGKarthikeyan Periyasamy
Add missing field documentation for HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG command with indentation alignment. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241217084511.2981515-2-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-19wifi: ath12k: Decrease ath12k_mac_station_assoc() stack usageJeff Johnson
Building the ath12k driver with llvm-18.1.7-x86_64 produces the warning: drivers/net/wireless/ath/ath12k/mac.c:5606:12: warning: stack frame size (1176) exceeds limit (1024) in 'ath12k_mac_op_sta_state' [-Wframe-larger-than] ath12k_mac_op_sta_state() itself does not consume much stack, but it calls ath12k_mac_handle_link_sta_state() which in turn calls ath12k_mac_station_add(). Since those are both static functions with only one caller, it is suspected that these both get inlined, and their stack usage is reported for ath12k_mac_op_sta_state(). A major contributor to the ath12k_mac_station_assoc() stack usage is: struct ath12k_wmi_peer_assoc_arg peer_arg; Avoid the excess stack usage by dynamically allocating peer_arg instead of declaring it on the stack. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241217202618.1329312-5-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-19wifi: ath12k: Decrease ath12k_sta_rc_update_wk() stack usageJeff Johnson
Currently when building ath12k with llvm-18.1.7-x86_64 the following warning is observed: drivers/net/wireless/ath/ath12k/mac.c:4946:13: warning: stack frame size (1112) exceeds limit (1024) in 'ath12k_sta_rc_update_wk' [-Wframe-larger-than] A major contributor to the stack usage in this function is: struct ath12k_wmi_peer_assoc_arg peer_arg; Avoid the excess stack usage by dynamically allocating peer_arg instead of declaring it on the stack. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241217202618.1329312-4-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-19wifi: ath12k: Decrease ath12k_bss_assoc() stack usageJeff Johnson
Currently when building ath12k with gcc-14.2.0 the following warning is observed: drivers/net/wireless/ath/ath12k/mac.c: In function 'ath12k_bss_assoc': drivers/net/wireless/ath/ath12k/mac.c:3080:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] A major contributor to the stack usage in this function is: struct ath12k_wmi_peer_assoc_arg peer_arg; Avoid the excess stack usage by dynamically allocating peer_arg instead of declaring it on the stack. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241217202618.1329312-3-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-19wifi: ath12k: Decrease ath12k_mac_op_remain_on_channel() stack usageJeff Johnson
Building the ath12k driver with llvm-18.1.7-x86_64 produces the warning: drivers/net/wireless/ath/ath12k/mac.c:10028:12: warning: stack frame size (1080) exceeds limit (1024) in 'ath12k_mac_op_remain_on_channel' [-Wframe-larger-than] A major contributor to the stack usage in this function is: struct ath12k_wmi_scan_req_arg arg; Avoid the excess stack usage by dynamically allocating arg instead of declaring it on the stack. As part of the effort use __free() for both this new allocation as well as the existing chan_list allocation, and since then no central cleanup is required, replace all cleanup gotos with returns. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241217202618.1329312-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-19wifi: ath12k: Add support for parsing 64-bit TLVsP Praneesh
There is mismatch between the format of monitor destination TLVs received and the expected format by the current implementation. The received TLVs are in 64-bit format, while the implementation is designed to handle 32-bit TLVs. This leads to incorrect parsing. Fix it by adding support for parsing 64-bit TLVs. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Link: https://patch.msgid.link/20241217095058.2725755-1-quic_ppranees@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-19wifi: ath9k: simplify internal time managementDmitry Antipov
Prefer 'ktime_t' over 'struct timespec64' for 'struct ath_chanctx' and 'struct ath_softc' timestamps, choose standard kernel time API over an ad-hoc math in 'chanctx_event_delta()' and 'ath9k_hw_get_tsf_offset()', adjust related users. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20241209155027.636400-3-dmantipov@yandex.ru Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-19wifi: ath9k: cleanup a few (mostly) TX-related routinesDmitry Antipov
Remove unused 'struct ath_softc *' argument of 'ath_pkt_duration()', 'ath_tx_update_baw()', 'ath_get_skb_tid()', 'ath_tx_addto_baw()' and 'ath_tx_count_frames()', adjust related users. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20241209155027.636400-2-dmantipov@yandex.ru Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-19wifi: ath9k: cleanup ath_txq_skb_done()Dmitry Antipov
Since 'txq' argument of 'ath_txq_skb_done()' is actually (mis|un)used, convert the former to local variable and adjust all related users. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20241209155027.636400-1-dmantipov@yandex.ru Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: advertise MLO support and capabilitiesRameshkumar Sundaram
Now everything in ath12k is in place and we can enable Multi-Link Operation (MLO) in the driver. For now it's only enabled for QCN9274 with firmware having ATH12K_FW_FEATURE_MLO feature bit set. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211154358.776279-8-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: assign unique hardware link IDs during QMI host capAditya Kumar Singh
Currently, in the QMI host capability, the device index, the number of local links, and the corresponding hardware link IDs are sent. The hardware link ID assignment is based on the local variable `hw_link_id`, which starts from 0 and ranges up to `num_local_links` in the device. Starting from 0 is not ideal because it can result in the same link ID being assigned to different devices in certain scenarios (e.g., split MAC). Additionally, for multi link operations the firmware expects the hardware link IDs in the same order as the Wireless Serial Interface (WSI) connection. Hence, for MLO to function seamlessly, the hardware link IDs across devices need to be unique and should follow the order of the WSI connection. To address this, a previous change read the WSI index from the Device Tree (DT) and stored it. Use this WSI index to determine the starting hardware link IDs for each device, ensuring uniqueness and correct order across all devices. While at it, add debug prints to clearly show the MLO capability advertisement sent during QMI host capability exchange. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211154358.776279-7-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: add ATH12K_FW_FEATURE_MLO capability firmware featureAditya Kumar Singh
To maintain backward compatibility with older firmware versions, introduce a new feature bit, ATH12K_FW_FEATURE_MLO, to identify whether the firmware supports MLO. If the firmware-X.bin does not have this bit advertised in the feature, then MLO capability in the host will be disabled. This applies only for QCN9274 chipsets. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211154358.776279-6-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: remove warning print in htt mlo offset event messageAditya Kumar Singh
In the function ath12k_htt_mlo_offset_event_handler(), it is possible that the ar is not yet active (started). The function ath12k_mac_get_ar_by_pdev_id() only searches for active pdev, so a NULL return is possible. Therefore, there is no need to print a warning, instead, just silently discard the message. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211154358.776279-5-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: add no-op without debug print in WMI Rx eventAditya Kumar Singh
Currently, certain WMI events are frequently received by the host. Since the host lacks the logic to process these events, the console is flooded with ‘Unknown eventid:’ debug messages. To address this, handle these events gracefully without printing debug messages. There is already a block of event IDs that are ignored with a debug print. However, this new type of event occurs more frequently, so no debug print is necessary, and handling it should be a no-op. While at it, re-arrange the code so that all Unknown event IDs are towards the end of the switch block. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211154358.776279-4-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: add can_activate_links mac operationAditya Kumar Singh
When operating as an ML station, mac80211 initially activates only one link in the driver until the peer is authorized. Once the state changes to authorized, the driver should call mac80211 API to activate all other partner links. Before doing so, mac80211 checks if the driver supports activating links via the can_activate_links mac80211_ops. Therefore, add support for this mac80211_ops and call the API to activate the links once the state changes to authorized. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211154358.776279-3-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: symmetrize scan vdev creation and deletion during HW scanAditya Kumar Singh
Currently, the hardware scan is initiated in the driver on scan link (15). After mapping to the appropriate radio based on the scan frequency, the vdev is created and the scan begins. However, the vdev is only deleted when channel assignment is about to occur after the scan. Additionally, it is also deleted if a new scan is requested on the same interface but the underlying radio differs in the new request. This imbalance leads to various hardware scan issues, especially when a non-MLO and MLO combination exists. In such cases, the latter tries to skip the scan and proceed with channel assignment while the former is still scanning, causing a firmware assert. To address this issue, symmetrize the scan vdev creation and deletion during hardware scan operations. This means creating a vdev when the scan starts and deleting it once the scan is completed or aborted. While at this, add a few debug prints in scan handling and a few empty lines for better code read. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211154358.776279-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: pass link ID during MLO while delivering skbAditya Kumar Singh
mac80211 expects link_id in some scenarios or else the packet might get dropped. Hence, add link_id information before delivering the skb. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241209185421.376381-10-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: fix ar->supports_6ghz usage during hw registerAditya Kumar Singh
In the ath12k_mac_hw_register() function's context, ar is an iterator variable, and there is no assurance that the last ar will be the one with 6 GHz enabled. Therefore, checking directly ar->supports_6ghz outside the loop is not appropriate. Additionally, 6 GHz lacks HT capabilities. To obtain the super set of HT capabilities across all grouped radios, 6 GHz should be excluded. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241209185421.376381-9-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: fix ath12k_qmi_alloc_chunk() to handle too large allocationsAditya Kumar Singh
If the requested memory chunk is too large, an error message is logged, but the request continues to be processed. However, no actual memory is allocated to the firmware from this request. Instead, the firmware sends another request with smaller chunks, where memory will be allocated accordingly. Therefore, it is pointless to proceed with parsing the request if at least one of the requests cannot be fulfilled. Hence, return -EAGAIN immediately and proceed to process the new request. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241209185421.376381-8-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: advertise multi device interface combinationKarthikeyan Periyasamy
The prerequisite for MLO support in cfg80211/mac80211 requires that all the links participating in MLO belong to the same wiphy/struct ieee80211_hw. The driver needs to group multiple discrete hardware components, each acting as a link in MLO, under one wiphy. Consequently, the driver advertises multi-hardware device interface combination capabilities specific to the radio, including supported frequencies. The global interface combination represent the combined interface capabilities. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241209185421.376381-7-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: Refactor radio frequency informationKarthikeyan Periyasamy
Currently, radio stores the low frequency and high frequency information as separate variables. However, cfg80211 already provides a suitable data structure struct wiphy_radio_freq_range to store this information efficiently. Additionally, for multi radio per wiphy infrastructure, this frequency range information is essential. In future patches using struct wiphy_radio_freq_range makes the code simpler. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241209185421.376381-6-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: introduce interface combination cleanup helperKarthikeyan Periyasamy
Introduce a cleanup helper function to avoid redundant code for interface combination cleanup. Remove the cleanup code from ath12k_mac_hw_unregister() and ath12k_mac_hw_register() and replace it with a new cleanup helper function. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241209185421.376381-5-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: add helper function to init partner cmem configurationKarthikeyan Periyasamy
In the Inter Multi-Link Operation, the primary device is expected to receive the partner device buffer. Therefore, each device initializes the partner device buffer in their cmem configuration. So add a helper function to initialize the partner device buffer in their cmem configuration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241209185421.376381-4-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: add partner device buffer support in receive data pathKarthikeyan Periyasamy
Currently, partner device buffer is not handled in the receive data path. In Multi-Link Operation, the partner device buffer is reported to the primary upper MAC rings. Therefore, add partner device buffer processing in the REO and Exception ring handler. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241209185421.376381-3-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: move to HW link id based receive handlingKarthikeyan Periyasamy
Currently, all the rx processing treats the hardware link id as the MAC id. The HW link id is a unique identifier for all hardware links participating in the multi link group. Therefore, the current MAC id derivation is insufficient to process the partner rx buffer in the Multi-Link Operation. So derive the MAC id from the HW link id and implementing this change in rx processing will enable the scaling of partner buffer processing in Multi-Link Operation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241209185421.376381-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: avoid redundant code in DP Rx error processKarthikeyan Periyasamy
Currently, in DP rx error processing, the MAC id is fetched redundantly from the same descriptor for each MSDU. To avoid this redundancy, move the fetch handling before the iteration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211153432.775335-9-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: enable MLO setup and teardown from coreKarthikeyan Periyasamy
In case of multi device group abstraction, host has to exchange the multi-link operation commands such as setup and ready to firmware before registering the device group to mac80211. The multi-link operation commands - setup, ready and teardown are necessary for many commands such as WMI_PEER_ASSOC_CMD, WMI_BCN_TMPL_CMD in case of multi-link interfaces. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211153432.775335-8-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: Add MLO WMI setup and teardown functionsBhagavathi Perumal S
In case of multi device group abstraction, host has to exchange the MLO commands such as setup, teardown and ready to firmware. Once multi device group is ready, host has to exchange MLO setup command with partner devices link information and followed by MLO ready command to firmware. During deinit, MLO teardown command should be sent to firmware. Firmware would send MLO setup complete and MLO teardown complete to host for MLO setup command and MLO teardown command respectively. Added WMI helper functions for the MLO setup, ready and teardown command and the handling for corresponding event from firmware. Add appropriate WMI tag, command id and event id to parse the event and send request. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211153432.775335-7-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: add support to allocate MLO global memory regionKarthikeyan Periyasamy
To enable Multi-Link Operation (MLO), QCN9274 firmware requests MLO global memory (MLO_GLOBAL_MEM_REGION_TYPE). This memory region is shared across all the firmware (SoC) that are participation in the MLO. Hence, add support to allocate and free MLO global memory region. Allocate one MLO global memory per struct ath12k_hw_group and assign the same memory to all firmware in the same struct ath12k_hw_group. WCN7850 firmware does not request this memory type, therefore this change will have no impact on WCN7850 device. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211153432.775335-6-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: refactor ath12k_qmi_alloc_target_mem_chunk()Karthikeyan Periyasamy
Currently, all QMI target memory types share the same allocation logic within ath12k_qmi_alloc_target_mem_chunk(). However, for Multi-Link Operation (MLO), the firmware requests a new MLO global memory region. This memory is shared across different firmware (SoC) participating in the MLO. To accommodate this logic change, refactor ath12k_qmi_alloc_target_mem_chunk() and introduce a helper function ath12k_qmi_alloc_chunk() for memory chunk allocation. Subsequent patch will add MLO global memory allocation logic. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211153432.775335-5-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: send partner device details in QMI MLO capabilityKarthikeyan Periyasamy
Currently, QMI MLO host capability is sent with the details of local links and hw_link id only for particular device. But in the case of multi device group abstraction, it has to include the details of hw_link_id, num_local_links of every partner device that is involved in the group during QMI MLO capability exchange. Add changes to send partner device details to the firmware in QMI MLO capability exchange. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211153432.775335-4-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: parse multiple device information from Device TreeRaj Kumar Bhagat
Currently, a single device is part of the device group abstraction. However, for multi-link operations, multiple devices need to be combined. This multi-device grouping is done via WSI (WLAN Serial Interface), which is described in the Device Tree. Information about different WSI groups and the number of devices involved in each group can be parsed from the Device Tree. Add changes to parse the Device Tree and determine WSI information, such as the different WSI groups and the number of devices per WSI group. Assign WSI index zero to the WSI controller device (to synchronize the clock among the devices within the WSI group), and increment the WSI index of each device in the order of the WSI connection. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211153432.775335-3-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
generated by cgit (git 2.34.1) at 2025-07-18 20:13:28 +0000