summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/microchip/wilc1000
AgeCommit message (Collapse)Author
2024-02-12wifi: wilc1000: set preamble size to auto as default in wilc_init_fw_config()Ajay Singh
WILC driver currently applies some default configuration whenever the firmware is initialized, and sets the default preamble size to short. However, despite this passed option, firmware is also able to successfully connect to access points only using long preamble, so this setting does not really enforce short preambles and is misleading regarding applied configuration. Update default configuration and make it match the firmware behavior by passing the existing WILC_FW_PREAMBLE_AUTO value (2 instead of 0). The updated setting does not really alter firmware behavior since it is still capable to connect to both short preamble and long preamble access points, but at list the setting now expresses for real the corresponding firmware behavior. More info: it has been implemented to address the transmission (Tx) blackout issue observed in the 802.11b mode. The modification has no impact on the other modes, which will continue to work as they did in the previous implementation. This change will allow the 802.11b transmission (2, 5.5, 11Mbps) to use long preamble. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240115-wilc_1000_fixes-v1-1-54d29463a738@bootlin.com
2024-02-08Merge wireless into wireless-nextJohannes Berg
There are some changes coming to wireless-next that will otherwise cause conflicts, pull wireless in first to be able to resolve that when applying the individual changes rather than having to do merge resolution later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-05wifi: wilc1000: remove setting msg.spiDavid Lechner
Calling spi_sync() unconditionally sets the spi field of struct spi_message. Therefore setting msg.spi = spi before calling spi_sync() has no effect and can be removed. (spi_message_add_tail() does not access this field.) Signed-off-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240201201248.2334798-2-dlechner@baylibre.com
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wilc1000Breno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Atmel WILC1000 SPI driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-9-leitao@debian.org
2024-01-18wifi: wilc1000: fix multi-vif management when deleting a vifAjay Singh
Adding then removing a second vif currently makes the first vif not working anymore. This is visible for example when we have a first interface connected to some access point: - create a wpa_supplicant.conf with some AP credentials - wpa_supplicant -Dnl80211 -c /etc/wpa_supplicant.conf -i wlan0 - dhclient wlan0 - iw phy phy0 interface add wlan1 type managed - iw dev wlan1 del wlan0 does not manage properly traffic anymore (eg: ping not working) This is due to vif mode being incorrectly reconfigured with some default values in del_virtual_intf, affecting by default first vif. Prevent first vif from being affected on second vif removal by removing vif mode change command in del_virtual_intf Fixes: 9bc061e88054 ("staging: wilc1000: added support to dynamically add/remove interfaces") Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Co-developed-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240115-wilc_1000_fixes-v1-5-54d29463a738@bootlin.com
2024-01-18wifi: wilc1000: fix incorrect power down sequenceAjay Singh
Use the correct register configuration when the WILC chip is down so the successive interface up operation is successful. The modified registers values during chip down helps to avoid the "FW not responding" debug message which sometimes occurs because of temporary bus communication failure during the next start. Also, make sure on first communication with the chip that it is indeed woken up. Reported-by: Michael Walle <mwalle@kernel.org> Closes: https://lore.kernel.org/linux-wireless/20221026085415.6jgwrhq4sunqaypm@0002.3ffe.de/ Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240115-wilc_1000_fixes-v1-4-54d29463a738@bootlin.com
2024-01-18wifi: wilc1000: do not realloc workqueue everytime an interface is addedAjay Singh
Commit 09ed8bfc5215 ("wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"") moved workqueue creation in wilc_netdev_ifc_init in order to set the interface name in the workqueue name. However, while the driver needs only one workqueue, the wilc_netdev_ifc_init is called each time we add an interface over a phy, which in turns overwrite the workqueue with a new one. This can be observed with the following commands: for i in $(seq 0 10) do iw phy phy0 interface add wlan1 type managed iw dev wlan1 del done ps -eo pid,comm|grep wlan 39 kworker/R-wlan0 98 kworker/R-wlan1 102 kworker/R-wlan1 105 kworker/R-wlan1 108 kworker/R-wlan1 111 kworker/R-wlan1 114 kworker/R-wlan1 117 kworker/R-wlan1 120 kworker/R-wlan1 123 kworker/R-wlan1 126 kworker/R-wlan1 129 kworker/R-wlan1 Fix this leakage by putting back hif_workqueue allocation in wilc_cfg80211_init. Regarding the workqueue name, it is indeed relevant to set it lowercase, however it is not attached to a specific netdev, so enforcing netdev name in the name is not so relevant. Still, enrich the name with the wiphy name to make it clear which phy is using the workqueue. Fixes: 09ed8bfc5215 ("wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"") Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Co-developed-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240115-wilc_1000_fixes-v1-3-54d29463a738@bootlin.com
2024-01-18wifi: wilc1000: fix driver_handler when committing initial configurationAjay Singh
During firmware initial configuration in wilc_init_fw_config, the special driver_handler 0 should be used instead of targeting a specific virtual interface (either 1 or 2) The issue does not seem to have real consequence (both virtual interfaces seems to answer correctly to a Add Block Ack request with the Immediate policy), but lets make everything homogeneous Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240115-wilc_1000_fixes-v1-2-54d29463a738@bootlin.com
2024-01-12wifi: wilc1000: fix RCU usage in connect pathAlexis Lothoré
With lockdep enabled, calls to the connect function from cfg802.11 layer lead to the following warning: ============================= WARNING: suspicious RCU usage 6.7.0-rc1-wt+ #333 Not tainted ----------------------------- drivers/net/wireless/microchip/wilc1000/hif.c:386 suspicious rcu_dereference_check() usage! [...] stack backtrace: CPU: 0 PID: 100 Comm: wpa_supplicant Not tainted 6.7.0-rc1-wt+ #333 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from wilc_parse_join_bss_param+0x7dc/0x7f4 wilc_parse_join_bss_param from connect+0x2c4/0x648 connect from cfg80211_connect+0x30c/0xb74 cfg80211_connect from nl80211_connect+0x860/0xa94 nl80211_connect from genl_rcv_msg+0x3fc/0x59c genl_rcv_msg from netlink_rcv_skb+0xd0/0x1f8 netlink_rcv_skb from genl_rcv+0x2c/0x3c genl_rcv from netlink_unicast+0x3b0/0x550 netlink_unicast from netlink_sendmsg+0x368/0x688 netlink_sendmsg from ____sys_sendmsg+0x190/0x430 ____sys_sendmsg from ___sys_sendmsg+0x110/0x158 ___sys_sendmsg from sys_sendmsg+0xe8/0x150 sys_sendmsg from ret_fast_syscall+0x0/0x1c This warning is emitted because in the connect path, when trying to parse target BSS parameters, we dereference a RCU pointer whithout being in RCU critical section. Fix RCU dereference usage by moving it to a RCU read critical section. To avoid wrapping the whole wilc_parse_join_bss_param under the critical section, just use the critical section to copy ies data Fixes: c460495ee072 ("staging: wilc1000: fix incorrent type in initializer") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105075733.36331-3-alexis.lothore@bootlin.com
2024-01-12wifi: wilc1000: fix declarations orderingAlexis Lothoré
Reorder parameters declaration in wilc_parse_join_bss_param to enforce reverse christmas tree Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105075733.36331-2-alexis.lothore@bootlin.com
2023-11-08wifi: wilc1000: simplify wilc_scan()Dmitry Antipov
Simplify 'wilc_scan()' assuming 'struct wilc_priv *' is the only data passed to '(*scan_result)()' callback and thus avoid typeless 'void *' pointers in related code, including 'struct wilc_user_scan_req'. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231031171330.70399-2-dmantipov@yandex.ru
2023-11-08wifi: wilc1000: cleanup struct wilc_conn_infoDmitry Antipov
Remove set but otherwise unused 'ch' member of 'struct wilc_conn_info' and avoid typeless 'void *' pointers in '(*conn_result)()' callback. Likewise for 'wilc_parse_join_bss_param()'. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231031171330.70399-1-dmantipov@yandex.ru
2023-10-30wifi: wilc1000: always release SDIO host in wilc_sdio_cmd53()Dmitry Antipov
Ensure 'sdio_release_host()' is always issued on return from 'wilc_sdio_cmd53()'. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231026141016.71407-2-dmantipov@yandex.ru
2023-10-30wifi: wilc1000: simplify remain on channel supportDmitry Antipov
For 'struct wilc_remain_ch', drop set but otherwise unused 'duration' field and adjust 'expired' callback assuming that the only data passed to it is 'struct wilc_vif *', thus making 'wilc_remain_on_channel()' a bit simpler as well. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231026141016.71407-1-dmantipov@yandex.ru
2023-10-19wifi: wilc1000: use vmm_table as array in wilc structAjay Singh
Enabling KASAN and running some iperf tests raises some memory issues with vmm_table: BUG: KASAN: slab-out-of-bounds in wilc_wlan_handle_txq+0x6ac/0xdb4 Write of size 4 at addr c3a61540 by task wlan0-tx/95 KASAN detects that we are writing data beyond range allocated to vmm_table. There is indeed a mismatch between the size passed to allocator in wilc_wlan_init, and the range of possible indexes used later: allocation size is missing a multiplication by sizeof(u32) Fixes: 40b717bfcefa ("wifi: wilc1000: fix DMA on stack objects") Cc: stable@vger.kernel.org Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231017-wilc1000_tx_oops-v3-1-b2155f1f7bee@bootlin.com
2023-09-25wifi: cfg80211: split struct cfg80211_ap_settingsJohannes Berg
Using the full struct cfg80211_ap_settings for an update is misleading, since most settings cannot be updated. Split the update case off into a new struct cfg80211_ap_update. Change-Id: I3ba4dd9280938ab41252f145227a7005edf327e4 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-21wifi: wilc1000: add back-off algorithm to balance tx queue packetsPrasurjya Rohan Saikia
Add an algorithm to backoff the Tx Task when low memory scenario is triggered at firmware. During high data transfer from host, the firmware runs out of VMM memory, which is used to hold the frames from the host. So, adding the flow control delays the transmit from host side when there is not enough space to accommodate frames in firmware side. Signed-off-by: Prasurjya Rohan Saikia <prasurjya.rohansaikia@microchip.com> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230915175946.4361-1-prasurjya.rohansaikia@microchip.com
2023-09-13wifi: cfg80211: modify prototype for change_beaconAloka Dixit
Modify the prototype for change_beacon() in struct cfg80211_op to accept cfg80211_ap_settings instead of cfg80211_beacon_data so that it can process data in addition to beacons. Modify the prototypes of ieee80211_change_beacon() and driver specific functions accordingly. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20230727174100.11721-4-quic_alokad@quicinc.com [while at it, remove pointless "if (info)" check in tracing that just makes all the lines longer than they need be - it's never NULL] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-08-23wifi: wilc1000: Remove unused declarationsYue Haibing
Commit 8399918f3056 ("staging: wilc1000: use RCU list to maintain vif interfaces list") removed wilc_get_interface() but not its declaration. Commit 9bc061e88054 ("staging: wilc1000: added support to dynamically add/remove interfaces") declared but never implemented wilc_cfg_alloc() and wilc_netdev_interface(). Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230819102100.13720-1-yuehaibing@huawei.com
2023-08-01wifi: wilc1000: add SPI commands retry mechanismAmisha Patel
In some situations like, chip wake-up with powersave enabled, SPI commands are failing temporarily. Reissuing commands after reset helps to overcome the failure. So, add the retry limit and reset command sequence API for read/write SPI commands. Signed-off-by: Amisha Patel <amisha.patel@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230724163955.4583-1-amisha.patel@microchip.com
2023-08-01wifi: wilc1000: remove use of has_thrpt_enh3 flagPrasurjya Rohan Saikia
The 'enhance throughput flow' algorithm is used by default. So older sections of the code are removed so as to always use this new algorithm. Signed-off-by: Prasurjya Rohan Saikia <prasurjya.rohansaikia@microchip.com> Acked-by: Ajay Kathat <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230710094401.235222-1-prasurjya.rohansaikia@microchip.com
2023-05-11wifi: wilc1000: Increase ASSOC response bufferAmisha Patel
In recent access points, information element is longer as they include additional data which exceeds 256 bytes. To accommodate longer association response, increase the ASSOC response buffer. Signed-off-by: Amisha Patel <amisha.patel@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230509172811.4953-1-amisha.patel@microchip.com
2023-05-11wifi: wilc1000: fix for absent RSN capabilities WFA testcaseAmisha Patel
Mandatory WFA testcase CT_Security_WPA2Personal_STA_RSNEBoundsVerification-AbsentRSNCap, performs bounds verfication on Beacon and/or Probe response frames. It failed and observed the reason to be absence of cipher suite and AKM suite in RSN information. To fix this, enable the RSN flag before extracting RSN capabilities. Fixes: cd21d99e595e ("wifi: wilc1000: validate pairwise and authentication suite offsets") Signed-off-by: Amisha Patel <amisha.patel@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421181005.4865-1-amisha.patel@microchip.com
2023-01-17Merge wireless into wireless-nextKalle Valo
Due to the two cherry picked commits from wireless to wireless-next we have several conflicts in mt76. To avoid any bugs with conflicts merge wireless into wireless-next. 96f134dc1964 wifi: mt76: handle possible mt76_rx_token_consume failures fe13dad8992b wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails
2022-12-25treewide: Convert del_timer*() to timer_shutdown*()Steven Rostedt (Google)
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-22wifi: wilc1000: add missing unregister_netdev() in wilc_netdev_ifc_init()Wang Yufen
Fault injection test reports this issue: kernel BUG at net/core/dev.c:10731! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI Call Trace: <TASK> wilc_netdev_ifc_init+0x19f/0x220 [wilc1000 884bf126e9e98af6a708f266a8dffd53f99e4bf5] wilc_cfg80211_init+0x30c/0x380 [wilc1000 884bf126e9e98af6a708f266a8dffd53f99e4bf5] wilc_bus_probe+0xad/0x2b0 [wilc1000_spi 1520a7539b6589cc6cde2ae826a523a33f8bacff] spi_probe+0xe4/0x140 really_probe+0x17e/0x3f0 __driver_probe_device+0xe3/0x170 driver_probe_device+0x49/0x120 The root case here is alloc_ordered_workqueue() fails, but cfg80211_unregister_netdevice() or unregister_netdev() not be called in error handling path. To fix add unregister_netdev goto lable to add the unregister operation in error handling path. Fixes: 09ed8bfc5215 ("wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"") Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/1669289902-23639-1-git-send-email-wangyufen@huawei.com
2022-12-22wifi: wilc1000: fix potential memory leak in wilc_mac_xmit()Zhang Changzhong
The wilc_mac_xmit() returns NETDEV_TX_OK without freeing skb, add dev_kfree_skb() to fix it. Compile tested only. Fixes: c5c77ba18ea6 ("staging: wilc1000: Add SDIO/SPI 802.11 driver") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/1668684964-48622-1-git-send-email-zhangchangzhong@huawei.com
2022-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-24wifi: wilc1000: validate number of channelsPhil Turnbull
There is no validation of 'e->no_of_channels' which can trigger an out-of-bounds write in the following 'memset' call. Validate that the number of channels does not extends beyond the size of the channel list element. Signed-off-by: Phil Turnbull <philipturnbull@github.com> Tested-by: Ajay Kathat <ajay.kathat@microchip.com> Acked-by: Ajay Kathat <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221123153543.8568-5-philipturnbull@github.com
2022-11-24wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_CHANNEL_LIST attributePhil Turnbull
Validate that the IEEE80211_P2P_ATTR_CHANNEL_LIST attribute contains enough space for a 'struct wilc_attr_oper_ch'. If the attribute is too small then it can trigger an out-of-bounds write later in the function. 'struct wilc_attr_oper_ch' is variable sized so also check 'attr_len' does not extend beyond the end of 'buf'. Signed-off-by: Phil Turnbull <philipturnbull@github.com> Tested-by: Ajay Kathat <ajay.kathat@microchip.com> Acked-by: Ajay Kathat <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221123153543.8568-4-philipturnbull@github.com
2022-11-24wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_OPER_CHANNEL attributePhil Turnbull
Validate that the IEEE80211_P2P_ATTR_OPER_CHANNEL attribute contains enough space for a 'struct struct wilc_attr_oper_ch'. If the attribute is too small then it triggers an out-of-bounds write later in the function. Signed-off-by: Phil Turnbull <philipturnbull@github.com> Tested-by: Ajay Kathat <ajay.kathat@microchip.com> Acked-by: Ajay Kathat <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221123153543.8568-3-philipturnbull@github.com
2022-11-24wifi: wilc1000: validate pairwise and authentication suite offsetsPhil Turnbull
There is no validation of 'offset' which can trigger an out-of-bounds read when extracting RSN capabilities. Signed-off-by: Phil Turnbull <philipturnbull@github.com> Tested-by: Ajay Kathat <ajay.kathat@microchip.com> Acked-by: Ajay Kathat <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221123153543.8568-2-philipturnbull@github.com
2022-11-01wifi: wilc1000: sdio: fix module autoloadingMichael Walle
There are no SDIO module aliases included in the driver, therefore, module autoloading isn't working. Add the proper MODULE_DEVICE_TABLE(). Cc: stable@vger.kernel.org Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221027171221.491937-1-michael@walle.cc
2022-10-11treewide: use get_random_u32() when possibleJason A. Donenfeld
The prandom_u32() function has been a deprecated inline wrapper around get_random_u32() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. The same also applies to get_random_int(), which is just a wrapper around get_random_u32(). This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Acked-by: Helge Deller <deller@gmx.de> # for parisc Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-09-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
drivers/net/ethernet/freescale/fec.h 7d650df99d52 ("net: fec: add pm_qos support on imx6q platform") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-02wifi: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220830201457.7984-2-wsa+renesas@sang-engineering.com
2022-09-02wifi: wilc1000: remove redundant ret variableJinpeng Cui
Return value from cfg80211_rx_mgmt() directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220830105505.287564-1-cui.jinpeng2@zte.com.cn
2022-08-30wifi: wilc1000: fix DMA on stack objectsAjay.Kathat@microchip.com
Sometimes 'wilc_sdio_cmd53' is called with addresses pointing to an object on the stack. Use dynamically allocated memory for cmd53 instead of stack address which is not DMA'able. Fixes: 5625f965d764 ("wilc1000: move wilc driver out of staging") Reported-by: Michael Walle <mwalle@kernel.org> Suggested-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Tested-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220809075749.62752-1-ajay.kathat@microchip.com
2022-08-26Merge tag 'wireless-next-2022-08-26-v2' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes berg says: ==================== Various updates: * rtw88: operation, locking, warning, and code style fixes * rtw89: small updates * cfg80211/mac80211: more EHT/MLO (802.11be, WiFi 7) work * brcmfmac: a couple of fixes * misc cleanups etc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-25wifi: cfg80211: Add link_id parameter to various key operations for MLOVeerendranath Jakkam
Add support for various key operations on MLD by adding new parameter link_id. Pass the link_id received from userspace to driver for add_key, get_key, del_key, set_default_key, set_default_mgmt_key and set_default_beacon_key to support configuring keys specific to each MLO link. Userspace must not specify link ID for MLO pairwise key since it is common for all the MLO links. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-08wifi: wilc1000: fix spurious inline in wilc_handle_disconnect()Kalle Valo
Sparse warns: drivers/net/wireless/microchip/wilc1000/hif.h:218:35: error: marked inline, but without a definition Remove the inline, it's not needed. Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220801110440.13144-1-kvalo@kernel.org
2022-07-27wifi: wilc1000: use existing iftype variable to store the interface typeAjay Singh
For consistency, use an existing 'iftype' element which was already having the interface type. Replace 'mode' with 'iftype' as it was used for the same purpose. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-8-ajay.kathat@microchip.com
2022-07-27wifi: wilc1000: add 'isinit' flag for SDIO bus similar to SPIAjay Singh
Similar to SPI priv data, add 'isinit' variable in SDIO priv. Make use of the state to invoke hif_init() once, and acquire the lock before accessing hif function. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-7-ajay.kathat@microchip.com
2022-07-27wifi: wilc1000: cancel the connect operation during interface downAjay Singh
Cancel the ongoing connection request to avoid any issue if the interface is set down before the connection request is completed. host_int_handle_disconnect was already available, so renamed it and used the same API for 'ndio_close' cb. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-6-ajay.kathat@microchip.com
2022-07-27wifi: wilc1000: get correct length of string WID from received config packetAjay Singh
For string type WID packet, the data length is received as 16-bit value so use 'get_unaligned_le16' conversion API to extract the correct length. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-5-ajay.kathat@microchip.com
2022-07-27wifi: wilc1000: set station_info flag only when signal value is validAjay Singh
Set station_info->filled to indicate signal level only when its value is received successfully using wilc_get_rssi(). Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-4-ajay.kathat@microchip.com
2022-07-27wifi: wilc1000: set correct value of 'close' variable in failure caseAjay Singh
Set 'close' variable to '1' to indicate closing operation when initialisation fails during wlan_initialize_threads() call. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-3-ajay.kathat@microchip.com
2022-07-27wifi: wilc1000: add WID_TX_POWER WID in g_cfg_byte arrayAjay Singh
WID_TX_POWER WID value is fetched from the firmware so it should be added in'g_cfg_byte' array to store the data which is received from firmware. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-2-ajay.kathat@microchip.com
2022-07-15wifi: cfg80211/mac80211: separate link params from station paramsShaul Triebitz
Put the link_station_parameters structure in the station_parameters structure (and remove the station_parameters fields already existing in link_station_parameters). Now, for an MLD station, the default link is added together with the station. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: cfg80211: do some rework towards MLO link APIsJohannes Berg
In order to support multi-link operation with multiple links, start adding some APIs. The notable addition here is to have the link ID in a new nl80211 attribute, that will be used to differentiate the links in many nl80211 operations. So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID attribute (as well as the NL80211_ATTR_MLO_LINKS attribute) and plugs it through the system in some places, checking the validity etc. along with other infrastructure needed for it. For now, I've decided to include only the over-the-air link ID in the API. I know we discussed that we eventually need to have to have other ways of identifying a link, but for local AP mode and auth/assoc commands as well as set_key etc. we'll use the OTA ID. Also included in this patch is some refactoring of the data structures in struct wireless_dev, splitting for the first time the data into type dependent pieces, to make reasoning about these things easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-07-15 18:06:31 +0000