summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2019-11-20mt76: remove aggr_work field from struct mt76_wcidFelix Fietkau
It is unused Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7615: fix control frame rx in monitor modeFelix Fietkau
Adjust filters and ensure frames don't get sent to MCU instead of host Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20iwlwifi: bump FW API to 52 for 22000 seriesLuca Coelho
Start supporting API version 52 for 22000 series. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: check kasprintf() return valueJohannes Berg
kasprintf() can fail, we should check the return value. Fixes: 5ed540aecc2a ("iwlwifi: use mac80211 throughput trigger") Fixes: 8ca151b568b6 ("iwlwifi: add the MVM driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: mvm: remove outdated comment referring to wake lockJohannes Berg
There's no multicast wake lock in the driver, remove the comment that refers to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: pcie: trace IOVA for iwlwifi_dev_tx_tbJohannes Berg
We trace the whole TFD with all TBs when in iwlwifi_dev_tx, but sometimes we add TBs to it later and then we don't have any of this data. Trace the I/O virtual address (IOVA) (it can be the physical address, or as returned by the IOMMU) here to aid debugging the DMA flows. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: dvm: excessive if in rs_bt_update_lq()Denis Efremov
There is no need to check 'priv->bt_ant_couple_ok' twice in rs_bt_update_lq(). The second check is always true. Thus, the expression can be simplified. Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: mvm: Report tx/rx antennasBen Greear
This makes it easier for user-space to know how many antennas the radio has. Seems to work with the AX200 radio, at least. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: pcie: rx: use rxq queue_size instead of constantJohannes Berg
This is a little less efficient now as it's known to be a multiqueue device in this function, but a future patch will have to use a variable here anyway, so use rxq->queue_size now instead to make it clearer. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: mvm: remove left-over non-functional email aliasJohannes Berg
This email alias (ilw@linux.intel.com) hasn't been functional for probably closer to a decade than not, remove it. It's not really clear to me how this ended up in new code though. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: config: remove max_rx_agg_sizeJohannes Berg
This field isn't set by any configuration, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: pcie: make some RX functions staticJohannes Berg
These aren't used outside the rx.c file, so make them static. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: scan: support scan req FW API ver 13Tova Mussai
1. Modify channel config flags to be used for legacy bands channels as well, to indicate SSIDs elements from ssidIEsArray. 2. Add new general flag. 3. Remove ssidNum from probe params. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: pcie: fix support for transmitting SKBs with fraglistJohannes Berg
When the implementation of SKBs with fraglist was sent upstream, a merge-damage occurred and half the patch was not applied. This causes problems in high-throughput situations with AX200 devices, including low throughput and FW crashes. Introduce the part that was missing from the original patch. Fixes: 0044f1716c4d ("iwlwifi: pcie: support transmitting SKBs with fraglist") Cc: stable@vger.kernel.org # 4.20+ Signed-off-by: Johannes Berg <johannes.berg@intel.com> [ This patch was created by me, but the original author of this code is Johannes, so his s-o-b is here and he's marked as the author of the patch. ] Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20rtl8xxxu: Remove set but not used variable 'vif','dev','len'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5396:24: warning: variable vif set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5397:17: warning: variable dev set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5400:6: warning: variable len set but not used [-Wunused-but-set-variable] They are introduced by commit e542e66b7c2e ("rtl8xxxu: add bluetooth co-existence support for single antenna"), but never used, so remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20brcmfmac: remove monitor interface when detachingRafał Miłecki
This fixes a minor WARNING in the cfg80211: [ 130.658034] ------------[ cut here ]------------ [ 130.662805] WARNING: CPU: 1 PID: 610 at net/wireless/core.c:954 wiphy_unregister+0xb4/0x198 [cfg80211] Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20brcmfmac: disable PCIe interrupts before bus resetRafał Miłecki
Keeping interrupts on could result in brcmfmac freeing some resources and then IRQ handlers trying to use them. That was obviously a straight path for crashing a kernel. Example: CPU0 CPU1 ---- ---- brcmf_pcie_reset brcmf_pcie_bus_console_read brcmf_detach ... brcmf_fweh_detach brcmf_proto_detach brcmf_pcie_isr_thread ... brcmf_proto_msgbuf_rx_trigger ... drvr->proto->pd brcmf_pcie_release_irq [ 363.789218] Unable to handle kernel NULL pointer dereference at virtual address 00000038 [ 363.797339] pgd = c0004000 [ 363.800050] [00000038] *pgd=00000000 [ 363.803635] Internal error: Oops: 17 [#1] SMP ARM (...) [ 364.029209] Backtrace: [ 364.031725] [<bf243838>] (brcmf_proto_msgbuf_rx_trigger [brcmfmac]) from [<bf2471dc>] (brcmf_pcie_isr_thread+0x228/0x274 [brcmfmac]) [ 364.043662] r7:00000001 r6:c8ca0000 r5:00010000 r4:c7b4f800 Fixes: 4684997d9eea ("brcmfmac: reset PCIe bus on a firmware crash") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtw88: allows to enable/disable HCI link PS mechanismYan-Hsuan Chuang
Different interfaces have its own link-related power save mechanism. Such as PCI can enter L1 state based on the traffic on the link, and sometimes driver needs to enable/disable it to avoid some issues, like throughput degrade when PCI trying to enter L1 state even if driver is having heavy traffic. For now, rtw88 only supports PCIE chips, and they just need to disable ASPM L1 when driver is not in power save mode, such as IPS and LPS. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtw88: pci: enable CLKREQ function if host supports itYan-Hsuan Chuang
By Realtek's design, there are two HW modules associated for CLKREQ, one is responsible to follow the PCIE host settings, and another is to actually working on it. But the module that is actually working on it is default disabled, and driver should enable that module if host and device have successfully sync'ed with each other. The module is default disabled because sometimes the host does not support it, and if there is any incorrect settings (ex. CLKREQ# is not Bi-Direction), device can be lost and disconnected to the host. So driver should first check after host and device are sync'ed, and the host does support the function and set it in configuration space, then driver can turn on the HW module to working on it. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtw88: pci: use for loop instead of while loop for DBI/MDIOYan-Hsuan Chuang
Use a for loop to polling DBI/MDIO read/write flags to avoid infinite loop happens Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtw88: pci: use macros to access PCI DBI/MDIO registersYan-Hsuan Chuang
Add some register and bit macros to access DBI/MDIO register. This should not change the logic. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: process HE capabilities requestsMikhail Karpenko
Pass HE interface type data requests between firmware and driver. Signed-off-by: Mikhail Karpenko <mkarpenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: add TLV for extension IEsMikhail Karpenko
Extension information elements have additional field for ID. This commit adds TLV for such elements and a structure for interface HE capabilities communication with firmware. Signed-off-by: Mikhail Karpenko <mkarpenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: signal that all packets coming from device are already floodedIgor Mitsyanko
Firmware floods all packets that need to be flooded (multicast, broadcast, unknown unicast) as required. Tell kernel bridge subsystem it does not need to flood packet itself by marking each incoming frame with skb->offload_fwd_mark flag. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: advertise netdev port parent IDIgor Mitsyanko
Use MAC address of the first active radio as a unique device ID. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: add interface ID to each packetIgor Mitsyanko
Add interface ID information to the tail of each transmitted packet so that firmware can know to which interface the packet belongs to. This is only needed if device supports HW switch capability. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: track broadcast domain of each interfaceIgor Mitsyanko
If firmware reports that it supports hardware switch capabilities, driver needs to track and notify device whenever broadcast domain of a particular network device changes (ie. whenever it's upper master device changes). Firmware needs a unique ID to tell broadcast domains from each other which is an opaque number otherwise. For that purpose we can use netspace:ifidx pair to uniquely identify each broadcast domain: - if netdev is not part of a bridge, then use it's own ifidx as a broadcast domain ID - if netdev is part of a bridge, then use bridge netdev ifidx as broadcast domain ID Firmware makes sure that packets are only forwarded between interfaces marked with the same broadcast domain ID. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: remove VIF in firmware in case of errorIgor Mitsyanko
Currently in case of error when registering network device with the kernel, we won't properly cleanup VIF state in firmware due to DEL_VIF command will not be send to wifi card. Make sure it does. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtlwifi: set proper udelay within rf_serial_readPing-Ke Shih
Since read RF register is an indirect access that hardware needs time to accomplish read action, but there's no ready bit, so delay is required to guarantee the read value is correct. After investigating internal documents, these delays are reduced as proper values. Reported-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtlwifi: rf_lock use non-irqsave spin_lockPing-Ke Shih
rf_lock is used to protect RF register access, but they will not called from interrupt context, so *_irqsave version isn't necessary. Then, these delays don't affect IRQ services. The old code holds spin_lock_irqsave() that will be detected a long delay as below: kworker/-276 4d... 0us : _raw_spin_lock_irqsave kworker/-276 4d... 0us : rtl8723_phy_rf_serial_read <-rtl8723de_phy_set_rf_reg kworker/-276 4d... 1us : rtl8723_phy_query_bb_reg <-rtl8723_phy_rf_serial_read kworker/-276 4d... 3us : rtl8723_phy_set_bb_reg <-rtl8723_phy_rf_serial_read kworker/-276 4d... 4us : __const_udelay <-rtl8723_phy_rf_serial_read kworker/-276 4d... 4us!: delay_mwaitx <-rtl8723_phy_rf_serial_read kworker/-276 4d... 1004us : rtl8723_phy_set_bb_reg <-rtl8723_phy_rf_serial_read [...] Reported-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20ipw2x00: remove set but not used variable 'force_update'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/intel/ipw2x00/ipw2100.c: In function shim__set_security: drivers/net/wireless/intel/ipw2x00/ipw2100.c:5582:9: warning: variable force_update set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20ipw2x00: remove set but not used variable 'reason'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/intel/ipw2x00/ipw2200.c: In function ipw_wx_set_mlme: drivers/net/wireless/intel/ipw2x00/ipw2200.c:6805:9: warning: variable reason set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20brcmfmac: remove set but not used variable 'mpnum','nsp','nmp'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c: In function brcmf_chip_dmp_get_regaddr: drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:790:5: warning: variable mpnum set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c: In function brcmf_chip_dmp_erom_scan: drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:866:10: warning: variable nsp set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c: In function brcmf_chip_dmp_erom_scan: drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:866:5: warning: variable nmp set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Lots of overlapping changes and parallel additions, stuff like that. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-16Merge tag 'wireless-drivers-next-2019-11-15' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.5 Second set of patches for v5.5. Nothing special this time, smaller features to various drivers and of course fixes all over. Major changes: iwlwifi * update scan FW API * bump the supported FW API version * add debug dump collection on assert in WoWLAN * enable adaptive dwell on P2P interfaces ath10k * request for PM_QOS_CPU_DMA_LATENCY to improve firmware initialisation time qtnfmac * add support for getting/setting transmit power * handle MIC failure event from firmware rtl8xxxu * add support for Edimax EW-7611ULB wil6210 * add SPDX license identifiers ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15rtw88: remove duplicated include from ps.cYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15rtl8xxxu: Remove set but not used variable 'rsr'Zheng Yongjun
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_gen2_config_channel: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:1266:13: warning: variable rsr set but not used [-Wunused-but-set-variable] rsr is never used, so remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15brcmsmac: remove unnecessary returnEduardo Abinader
Signed-off-by: Eduardo Abinader <eduardoabinader@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15net: wireless: ti: remove local VENDOR_ID and DEVICE_ID definitionsH. Nikolaus Schaller
They are already included from mmc/sdio_ids.h and do not need a local definition. Fixes: 884f38607897 ("mmc: core: move some sdio IDs out of quirks file") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-15net: wireless: ti: wl1251 use new SDIO_VENDOR_ID_TI_WL1251 definitionH. Nikolaus Schaller
SDIO_VENDOR_ID_TI_WL1251 is now defined in mmc/sdio_ids.h separately from SDIO_VENDOR_ID_TI for wl1271. Fixes: 884f38607897 ("mmc: core: move some sdio IDs out of quirks file") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-15net: wireless: ti: wl1251 add device tree supportH. Nikolaus Schaller
We will have the wl1251 defined as a child node of the mmc interface and can read setup for gpios, interrupts and the ti,use-eeprom property from there instead of pdata to be provided by pdata-quirks. Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Cc: <stable@vger.kernel.org> # v4.7+ [Ulf: Fixed up some complaints from checkpatch] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-15Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.5. Major changes: ath10k * request for PM_QOS_CPU_DMA_LATENCY to improve firmware initialisation time
2019-11-15iwlwifi: mvm: fix non-ACPI functionJohannes Berg
The code now compiles without ACPI, but there's a warning since iwl_mvm_get_ppag_table() isn't used, and iwl_mvm_ppag_init() must not unconditionally fail but return success instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: 22000: fix some indentationJohannes Berg
Somehow two tabs snuck into this file where just one should be used, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: remove IWL_DEVICE_22560/IWL_DEVICE_FAMILY_22560Johannes Berg
This is dead code, nothing uses the IWL_DEVICE_22560 macro and thus nothing every uses IWL_DEVICE_FAMILY_22560. Remove it all. While at it, remove some code and definitions used only in this case, and clean up some comments/names that still refer to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: sync the iwl_mvm_session_prot_notif layoutEmmanuel Grumbach
The firmware API has changed a little bit but this change has no impact on the flow and is backward compatible. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: start CTDP budget from 2400mAMordechay Goodstein
The current budget of 2000mA is preventing us from reaching maximum throughput. According to our system engineers, we can increase the maximum budget to 2400mA to solve this problem. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: don't skip mgmt tid when flushing all tidsHaim Dreyfuss
There are various of flows which require tids flushing (disconnection, suspend, etc...). Currently, when the driver instructs the FW to flush he masks all the data tids(0-7). However, the driver doesn't set the management tid (#15) which cause the FW not to flush it. When the FW tries to remove the mgmt queue he throws an assert since it is not an empty queue. instead of just set only the data tids set everything and let the FW ignore the invalid tids. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: scan: enable adaptive dwell in p2pShahar S Matityahu
Align to the requirement update and support adaptive dwell in p2p scan. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: refactor the SAR tables from mvm to acpiIhab Zhaika
Refactored the SAR related functions from iwlmvm to acpi in order to make it shared between different opmodes in addition to removing unused variable ppag_rev. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-07-16 07:41:45 +0000