summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2025-05-06wifi: iwlwifi: cfg: remove fw_name_macJohannes Berg
Instead of having fw_name_mac in the config, derive it from the MAC type instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.8dba9a2d3546.I41fa594d6a0be163444b90c1ed4b441a949d3899@changeid
2025-05-06wifi: iwlwifi: tests: check for device namesJohannes Berg
Add a unit test that checks that each device has a name, either via the specific name entry or the config's name. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.c04287134280.Iedc7c05a41dc8bfe04dc8b95fea38543513eac2d@changeid
2025-05-06wifi: iwlwifi: pcie: add entry for Killer AX1650i on AdL-PJohannes Berg
On AdL-P, we're missing an entry for the Killer(R) Wi-Fi 6 AX1650i 160 MHz adapter. Add an entry to fix that. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219114 Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.483214386aa4.Iad4d2041bfe544875fe9f5c051e23a765f862786@changeid
2025-05-06wifi: iwlwifi: unify some configurationsJohannes Berg
Rather than having individual entries for different MAC and RF steps, unify the entries by using fw_name_mac and remove the now duplicated ones. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.b93f34a65822.I57b8235acb675cb6b4e97df2f4a7365f3d9bff18@changeid
2025-05-06wifi: iwlwifi: remove duplicated lineMiri Korenblit
This line was duplicated by mistake, remove one occurrence. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.a2601e0a08e0.Ie72fadec40e41b8197bfdae16eaa430c64a3e62d@changeid
2025-05-06wifi: iwlwifi: pcie: Add support for new device idsSomashekhar Puttagangaiah
Add device support for PeP on ScP Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.a66928fcc82a.Icbbc7c28855f8de232cb3916901a4da3ac286117@changeid
2025-05-06wifi: iwlwifi: remove TH/TH1 RF typesJohannes Berg
There are the same values as JF2/JF1 respectively, and that really matches the code names. Remove TH/TH1. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.7677cffdfae2.Idd76734c310cf5f27de43d24e71b27467ab5905a@changeid
2025-05-06wifi: iwlwifi: clean up config macroJohannes Berg
The IWL_DEV_INFO() macro has far too many arguments, and most of the time they're just "ANY". Use C99 initializers in the macro to clean that up. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.42318bb31f0e.Ic3a40afcd182b6e1802bb8f8a1a845b20608e328@changeid
2025-05-06wifi: iwlwifi: mvm: remove nl80211 testmodeJohannes Berg
This was used in the past for NoA and/or beacon filter testing, but these days everything is tested via debugfs or special FW commands, so remove the testmode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.751018e0ed8e.I21557a9a3d57234187f1b0b2182a1714ecc66b9a@changeid
2025-05-06wifi: iwlwifi: mld: set rx_mpdu_cmd_hdr_sizeJohannes Berg
Set rx_mpdu_cmd_hdr_size so that tracing will correctly include the frame header. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.caf1d8e2bae3.I82d89bc8d128f78159a8a11b1573574dacdeb99e@changeid
2025-05-06wifi: iwlwifi: dvm: fix various W=1 warningsJohannes Berg
Fix warnings occurring with W=1, mostly const and one about pointer arithmetic. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.3ef1e4f1cccb.Ic41d3f3721e8bd9df9cd50242232110c4a93e873@changeid
2025-05-06wifi: iwlwifi: mld: force the responder to use the full bandwidthAvraham Stern
When a soft AP is started, it may not use the full configured bandwidth (e.g. if no station is connected). As a result, the responder will not support the configured bandwidth. Since the responder supports ranging with unassociated stations, there is no indication to the driver when the full bandwidth should be enabled. Fix it by configuring the AP to always use the full bandwidth when a responder is supported. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.620fe8099fff.Id50675f4d4c524b0a7ee602c48af538a327010e0@changeid
2025-05-06wifi: iwlwifi: mld: start AP with the correct bandwidthAvraham Stern
When a channel context is added, it is still not assigned to the link and the link is not yet active. As a result, the channel context min_def is used when the AP is started, even when the full bandwidth should be used. Fix it by updating the PHY channel context when the link is already active so the full bandwidth is used when needed. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.30b043b10fb1.I62c2aa58687e4796b759fa68132122119a337b49@changeid
2025-05-06wifi: iwlwifi: mld: add monitor internal stationDaniel Gabay
This is needed for TX injection over monitor interface. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.5ec460d3f1c2.Ic8456efb4cdd722dcd9c4910a1569ef9d3e4e066@changeid
2025-05-06wifi: iwlwifi: mld: support for COMPRESSED_BA_RES_API_S_VER_7Emmanuel Grumbach
The rate format changed but since we don't use the rate, just claim support for this new API. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.c4be90e242ff.Ie8a0f0d6320613bd8c5cb6c82a063069fffa3b67@changeid
2025-05-06wifi: iwlwifi: mvm: support iwl_mac_power_cmd version 2Miri Korenblit
This version fixes the issue that was worked around by iwl_mvm_smps_workaround. So for FWs with the new version don't do the workaround, and set new bit added in this version when appropriate. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20250430155443.5c9a0181a84b.I9a03bc07a7b3f6e37cc1c0c1af5719e765a05897@changeid
2025-05-06wifi: iwlwifi: implement TOP resetJohannes Berg
Implement TOP reset (new in the SC family), which resets much of the (shared) hardware without resetting the bus interfaces. Use it to recover from TOP fatal error, or if manually used; we'll need to add using it for FSEQ updates later. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.12f38024a3b4.I9c22f6c4f6de64f3b34ccd898370ec1859ab7dbf@changeid
2025-05-06wifi: iwlwifi: mld: handle SW reset w/o NIC errorJohannes Berg
For the upcoming TOP reset, the sw_reset() method may be called without nic_error() before it. In this case, also abort any still pending scans and set in_hw_restart. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.b732ff4e9f31.I3948c2d892f1ee82b3a6bf9f123be02a1eaa82e5@changeid
2025-05-06wifi: iwlwifi: mvm: support ROC command version 6Miri Korenblit
This was suppsed to be supported only in iwlmld, but turns out that it will be needed also in iwlmvm. Add support for it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20250430155443.d118ee63aca4.I12ea349ca6587d8ea606f6ece4a9f3c0c2bb1494@changeid
2025-05-06wifi: iwlwifi: mld: support iwl_mac_power_cmd version 2Miri Korenblit
This version fixes the issue that was worked around by iwl_mld_smps_wa. So for FWs with the new version don't do the workaround, and set new bit added in this version when appropriate. While at it, rename iwl_mld_smps_wa to iwl_mld_smps_workaround. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20250430155443.77fdb18d1ee0.I93688612ac4f6ec99da9bc54bee16554ef40a40b@changeid
2025-05-06wifi: iwlwifi: add support for ALIVE v8Emmanuel Grumbach
The firmware added a field to describe the platform Id. Just print it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.dc387ae36e0f.Iafd364c6b23749597b658015be97295ad0c1730d@changeid
2025-05-06wifi: iwlwifi: mld: add kunit test for emlsr with bt onSomashekhar Puttagangaiah
add kunit test to validate entering and exiting emlsr scenarios when the bt is on with certain penalty on wifi. Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.6621494fa412.If89b4b2dab308d825ca02284dd8e0030675d7af5@changeid
2025-05-06wifi: iwlwifi: fw: support PPAG command version 7Pagadala Yesu Anjaneyulu
PPAG command version 7 will send exact data read from BIOS to firmware without filtering/altering BIOS data. This enables the driver to become purely a pipe for this feature. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.88ed7b2cadef.Iad78f6cec617d1f111b704352795dde81af71a99@changeid
2025-05-06wifi: iwlwifi: fw: support reading PPAG BIOS table revision 4Pagadala Yesu Anjaneyulu
PPAG revision 4 data has more supported bits than supported in version 6 of PPAG command. So, adjust by masking accordingly to firmware acceptance. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.f1cb31f9f6ab.I56d6887866f76fd02b2cd298e3de1189c6d3890e@changeid
2025-05-06wifi: iwlwifi: rename ppag_ver to ppag_bios_revPagadala Yesu Anjaneyulu
ppag_ver variable is holding PPAG BIOS revision but name misleading as PPAG command API version, So rename to ppag_bios_rev. This will improve code readability but doesn't alter behaviour. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.be51850947df.If81d88cd2d38299faf1e2a3db5efbc021650f907@changeid
2025-05-06wifi: iwlwifi: mld: don't return an error if the FW is deadMiri Korenblit
If iwl_mld_change_vif_links failed to add the requested link(s) because the FW is dead (error before recovery), there is no point in returning an error value, as the reconfig will re-add the link(s) after the FW is started. Return 0 in that case, and WARN in the others. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250430151952.c549c72b1f37.I445bf723e9befc9541b4abd0ec7c72db8f1ff177@changeid
2025-05-06wifi: iwlwifi: mld: check for NULL before referencing a pointerMiri Korenblit
Errors can happen, and it is better not to risk with a NULL pointer dereference. Make sure that the links-to-remove pointers are not NULL before dereferencing it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250430151952.408652d45cda.I1bb72836dab17895a2e39910e4493d667db0fa80@changeid
2025-05-06wifi: iwlwifi: mld: allow EMLSR with 2.4 GHz when BT is ONSomashekhar Puttagangaiah
When BT is ON, EMLSR with one of the links operating on 2.4 GHz is allowed only if it meets following conditions. In this patch: 1. during link selection, when BT is ON, allow emlsr only if BT pentalty is < 7%. 2. exit EMLSR if BT is turned ON and one of the links is operating on 2.4 GHz with BT penalty > 7% Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.d30212ec3901.I48e3d5bd6b0b8583f98057c38d2ee30fff5abd8a@changeid
2025-05-06wifi: iwlwifi: implement TOP reset followerJohannes Berg
For the upcoming SC hardware, a new reset mode "(silent) TOP reset" will be available. When BT initiates that reset, it'll negotiate with the WiFi firmware which makes it appear to the driver as the reset interrupt. To distinguish it from all the other reasons for the reset interrupt, there's (now) a status field in CSR 0x110. Implement the part of TOP reset where we react to BT doing it. This requires disambiguating the interrupt, depending on the state of the device, since we can even get TOP reset from BT while waiting for the reset handshake. If TOP reset is done by BT while we're not trying to do reset anyway, then simply reprobe, since we cannot keep the state of the device as it's being reset, after waiting the needed 180ms to let the device reset/settle. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.fb86bfbdca40.Ibe40bf54003e3f8929b671324a395e76eb64a4d8@changeid
2025-05-06wifi: iwlwifi: avoid scheduling restart during restartJohannes Berg
When a restart is in progress, it can be async due to the next worker being scheduled in mac80211 (restart work) or the driver itself (reprobe). Avoid scheduling another restart during this period. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.db428503ec3c.I3f2be3d72a9d40cfb4e697cdab1cd2866a9262bc@changeid
2025-05-06wifi: iwlwifi: mld: tests: extend link pair testsJohannes Berg
Generalize and extend the link pair tests to not just do channel load checks, but generally check link pairs. To enable more accurate checking, return the reasons bitmap from iwl_mld_valid_emlsr_pair() and therefore rename it to iwl_mld_emlsr_pair_state. It's also necessary now to add more chandefs, and while doing so fix the existing ones to be valid and add a test to check they really are valid. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.1f7c4ac75c6d.I69d68359e02d99632e95daba3d126115dce167b3@changeid
2025-05-06wifi: iwlwifi: mld: refactor tests to use chandefsJohannes Berg
Instead of building invalid chandefs on the fly, use only chandefs throughout and ensure those are valid. Also add more chandefs that will be needed for new tests. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.6643fa8773f1.I644e9053d222a772e1d109799c4bfa0677add4d7@changeid
2025-05-06wifi: iwlwifi: mld: send the WPFC table to the FWMiri Korenblit
Read the table on op mode start, and send it to the FW when it is loaded. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.e349a33cd871.Ied196cf0fbe18b82b87ce713c4e3347f9aca1c25@changeid
2025-05-06wifi: iwlwifi: read WPFC also from UEFIMiri Korenblit
We are currently reading it only from ACPI, but we need to read it from UEFI too (if exists, and if the UEFI variables are locked) Add the reading from the UEFI and use IWL_BIOS_TABLE_LOADER to generate the code that determines the source from which the table should be read (ACPI/UEFI). Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.839a5e7dd89b.I491acbf68047874df97b3971f1ba692ebc998a52@changeid
2025-05-06wifi: iwlwifi: prepare for reading WPFC from UEFIMiri Korenblit
IWL_BIOS_TABLE_LOADER generates the code that determines from what source to read a BIOS table (ACPI or UEFI). As we want to read WPFC from UEFI to, iwl_acpi_get_phy_filters needs to have the prototype that is required by this macro: receive fwrt and return a int on success/failure. Do that. This allowes us to make to version of iwl_acpi_get_phy_filters for non ACPI builds back to an iniline function. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Link: https://patch.msgid.link/20250430151952.8046a2db775b.Ifbcf4168183d3cd635e3e800ec7ecd903e57d361@changeid
2025-05-06wifi: iwlwifi: Add short description to enum iwl_power_schemeJeff Johnson
The kernel-doc script flagged the following: drivers/net/wireless/intel/iwlwifi/mvm/mvm.h:130: warning: missing initial short description on line: * enum iwl_power_scheme 1 warnings as Errors Add a short description to address this warning. Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250319-iwl_power_scheme-kdoc-v1-1-2033ae38b178@oss.qualcomm.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-05wifi: rtw89: constrain TX power according to dynamic antenna power tableKuan-Chung Chen
Dynamic Antenna Gain (DAG) adjusts TX power based on antenna gain. To prevent signal distortion from excessive power increases, a dynamic antenna power table limits the maximum adjustable TX power. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250430055157.13623-3-pkshih@realtek.com
2025-05-05wifi: rtw89: phy: add C2H event handler for report of FW scanKuan-Chung Chen
Newer firmware will notify driver of the Packet Detection (PD) value on the channel after switch channels during FW scan. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250430055157.13623-2-pkshih@realtek.com
2025-05-05wifi: rtw89: Fix inadverent sharing of struct ieee80211_supported_band dataOndrej Jirman
Internally wiphy writes to individual channels in this structure, so we must not share one static definition of channel list between multiple device instances, because that causes hard to debug breakage. For example, with two rtw89 driven devices in the system, channel information may get incoherent, preventing channel use. Signed-off-by: Ondrej Jirman <megi@xff.cz> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250429122916.1734879-3-megi@xff.cz
2025-05-05wifi: rtw89: Convert rtw89_core_set_supported_band to use devm_*Ondrej Jirman
The code can be simplified by using device managed memory allocations. Simplify it. Signed-off-by: Ondrej Jirman <megi@xff.cz> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250429122916.1734879-2-megi@xff.cz
2025-05-05wifi: rtw89: introduce helper to get designated link for MLOZong-Zhe Yang
A link bound to HW band 0 was previously always assumed to exist, because it's true on non-MLD connection, and MLO connection is not supported yet. Now, start to consider MLO cases and prepare to enable MLO support in the following. Add skeleton of designated link. For single-link cases, helper returns the one. For multi-link cases, priorities can be scheduled. Then, drop assumption of link bound to HW band 0. One exception is that MCC doesn't work with MLD yet, so it still expects link on HW band 0 somewhere. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250428112456.13165-11-pkshih@realtek.com
2025-05-05wifi: rtw89: roc: dynamically handle link id and link instance indexZong-Zhe Yang
Originally, a macro, RTW89_ROC_BY_LINK_INDEX, is used to decide the link which deals with the ROC process. Before enabling MLO support, it's fine to hard-code RTW89_ROC_BY_LINK_INDEX as 0 since the link instance-0 (on HW-0) is always active. But, for the impending enablement of MLO support, tweak the leaf functions to dynamically handle ROC link instance index. Besides, in the follow-up, ROC caller will get a designated link and will then drop RTW89_ROC_BY_LINK_INDEX. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250428112456.13165-10-pkshih@realtek.com
2025-05-05wifi: rtw89: Fill in correct Rx link ID for MLOPo-Hao Huang
For MLO connections, RX link ID is required to do address conversion. Fill it in by the hardware info. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250428112456.13165-9-pkshih@realtek.com
2025-05-05wifi: rtw89: add MLD capabilities declarationPo-Hao Huang
Add MLD capabilities so association requests can carry multi-link element with correct content. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250428112456.13165-8-pkshih@realtek.com
2025-05-05wifi: rtw89: extend join_info H2C command for MLO fieldsPo-Hao Huang
The join_info H2C command is used to indicate a station is connected and tell FW to create/maintain an instance for it. Extend to fill MLO fields. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250428112456.13165-7-pkshih@realtek.com
2025-05-05wifi: rtw89: Configure scan band when mlo_dbcc_mode changesPo-Hao Huang
Previously only the first band is used for scanning. With MLO, update scan parameters accordingly by so we can choose to scan from either band. C2H event return value reflects current scanning band, mask it out so we don't treat correct return value as fail. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250428112456.13165-6-pkshih@realtek.com
2025-05-05wifi: rtw89: extend mapping from Qsel to DMA ch for MLOZong-Zhe Yang
After impending MLO support, TX Qsel would come from other HW band rather than HW-0. For example, when working on HW-1, TX release report may fill QSEL_XX_1 and cause warning "Cannot map qsel to dma: ...". So, extend the mapping to recognize multiple HW bands. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250428112456.13165-5-pkshih@realtek.com
2025-05-05wifi: rtw89: Adjust management queue mapping for [MLO, HW-1]Po-Hao Huang
Adjust mapping of management packets accordingly to send it on the second hardware band. Previously only single band is used and we plan to enable MLO, so the second band will be needed. Data packets will be steered by hardware so no related changes are required. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250428112456.13165-4-pkshih@realtek.com
2025-05-05wifi: rtw89: 8922a: use SW CRYPTO when broadcast in MLO modePo-Hao Huang
8922A doesn't support broadcast/multicast traffic under MLO mode. So let mac80211 do the encryption/decryption for us when the connection is in MLO mode. Future BE ICs fixes this issue. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250428112456.13165-3-pkshih@realtek.com
2025-05-05wifi: rtw89: 8922a: rfk: adjust timeout time of RX DCKPing-Ke Shih
The RX DCK in firmware could retry 3 times if calibration value is not stable. Roughly each calibration can be done within 16 ms, so expect 16 * 4 (with additional 16 ms) will be enough. More, in coming MLO, it will do calibration on two path, so multiply 2. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250428112456.13165-2-pkshih@realtek.com
generated by cgit (git 2.34.1) at 2025-07-18 02:43:09 +0000