| Age | Commit message (Collapse) | Author |
|---|
|
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct rtw89_reg2_def *" but the returned type,
while technically matching, will be const qualified. As there isn't a
general way to discard "const" qualifiers, adjust the returned type to
match the assigned type. No change in allocation size results.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250426060935.work.049-kees@kernel.org
|
|
The last use of rtl_bb_delay() was removed in 2014's
commit 5c99f04fec93 ("rtlwifi: rtl8723be: Update driver to match Realtek
release of 06/28/14")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250425235340.288340-4-linux@treblig.org
|
|
rtl92d_phy_ap_calibrate(),
rtl92du_phy_ap_calibrate(),
rtl92ee_phy_ap_calibrate(), and
rtl8821ae_phy_ap_calibrate()
are all empty function stubs that are never called anywhere.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250425235340.288340-3-linux@treblig.org
|
|
rtl_usb_resume() and rtl_usb_suspend() are trivial stubs that were
added in 2011's
commit 2ca20f79e0d8 ("rtlwifi: Add usb driver")
but aren't wired up anywhere (though commit 442888c706e9 ("rtlwifi:
rtl8192cu: Add routines dm, fw, led and sw") added commented
out assignments).
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250425235340.288340-2-linux@treblig.org
|
|
RTL8723BE found on some ASUSTek laptops, such as F441U and X555UQ with
subsystem ID 11ad:1723 are known to output large amounts of PCIe AER
errors during and after boot up, causing heavy lags and at times lock-ups:
pcieport 0000:00:1c.5: AER: Correctable error message received from 0000:00:1c.5
pcieport 0000:00:1c.5: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
pcieport 0000:00:1c.5: [ 0] RxErr
Disable ASPM on this combo as a quirk.
This patch is a revision of a previous patch (linked below) which
attempted to disable ASPM for RTL8723BE on all Intel Skylake and Kaby Lake
PCIe bridges. I take a more conservative approach as all known reports
point to ASUSTek laptops of these two generations with this particular
wireless card.
Please note, however, before the rtl8723be finishes probing, the AER
errors remained. After the module finishes probing, all AER errors would
indeed be eliminated, along with heavy lags, poor network throughput,
and/or occasional lock-ups.
Cc: <stable@vger.kernel.org>
Fixes: a619d1abe20c ("rtlwifi: rtl8723be: Add new driver")
Reported-by: Liangliang Zou <rawdiamondmc@outlook.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218127
Link: https://lore.kernel.org/lkml/05390e0b-27fd-4190-971e-e70a498c8221@lwfinger.net/T/
Tested-by: Liangliang Zou <rawdiamondmc@outlook.com>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422061755.356535-1-jeffbai@aosc.io
|
|
A MCC (multi-channel concurrency) schedule is like the following.
|< mcc interval >|
|< duration ref >|< duration aux >|
|< tob ref >|< toa ref >|< tob aux >|< toa aux >|
V V
tbtt ref tbtt aux
|< beacon offset >|
Original logic might unexpectedly calculate toa (time offset ahead) of
auxiliary role to be negative even when there is no role timing limit.
If toa-aux is negative, TBTT-aux would in logic fall into duration-ref.
Then, if auxiliary role is GO unfortunately, it cannot guarantee that
beacons will TX well. So now, when deciding the lower bound of toa-ref,
take toa-aux into account. Make toa-aux at least be zero in normal cases.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-13-pkshih@realtek.com
|
|
Since tob (time offset behind) could be negative, change the type of tob in
microsecond to s32. And, refine accumulation with while-loop by calculation
with roundup_u64(). Besides, as long as one of the MCC roles is GO, use the
short MCC start time.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-12-pkshih@realtek.com
|
|
MCC has a courtesy mechanism which allows one role to use another's
duration in a given cycle. Originally, this courtesy mechanism only
supports in one direction. However, in some field cases, both of MCC
roles may simultaneously have timing configurations that are not good
enough. So, support courtesy mechanism in both directions.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-11-pkshih@realtek.com
|
|
MCC has a courtesy mechanism which allows one role to use another's
duration in a given cycle. Courtesy mechanism will be enabled when
one role has a not perfect duration. Otherwise, not. When MCC updates,
duration of each role will be re-calculated. And then, the new courtesy
config might be different from the old one. However, to change courtesy
config, the entire MCC plan requires to be renewed when MCC updates.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-10-pkshih@realtek.com
|
|
MCC will limit the time a role can use in a schedule according to the
periodic NoA. Original logic didn't consider the case where NoA start
time has passed. It might lead to inaccurate result. So, tweak it.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-9-pkshih@realtek.com
|
|
There are two roles during MCC and the offset between their TBTT is called
beacon offset. Originally, when MCC runs GO+STA mode, it used fixed beacon
offset to simplify some logic because GO role can master its TSF. However,
if MCC is stopped and restarted before a same GO is down, its TSF might be
discontinuous. Then, there might be undefined behavior happens in GC sides.
So, to let a same GO have a continuous TSF, MCC no longer changes its TSF
to meet a fixed beacon offset. Instead, GO+STA mode also calculates beacon
offset dynamically as what GC+STA mode did.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-8-pkshih@realtek.com
|
|
When APs or GOs are up, their TSF start point are randomized to avoid
collisions. However, the TSF of an existing AP/GO would be randomized
multiple times. It caused the TSF is discontinuous to the corresponding
STA/GC sides. So, once TSF has been randomized, don't re-randomize it
unless SER (system error recovery) happens unfortunately.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-7-pkshih@realtek.com
|
|
Since FW cannot handle HW scan process and MCC (multi-channel concurrency)
mode simultaneously, if a HW scan is requested during MCC, MCC mode will be
paused temporarily. Then, the GO role if any might be absent. So, calculate
an estimated time for the requested HW scan process and search for existing
GO roles to fill one-time NoA.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-6-pkshih@realtek.com
|
|
FW has a limited amount of channels that can be dealt with by one HW scan
H2C command. Based on the limit, channels in scan request might be parsed
into SW structure piece by piece along with multiple HW scan H2C commands.
But, in order to estimate things of entire HW scan process, it's required
to have the whole parsed channel list when HW scan is going to start. So,
tweak HW scan flow to prepare the whole channel list ahead. Still, each HW
scan H2C command takes allowed amount of channels from the list according
to the limit.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-5-pkshih@realtek.com
|
|
These stuffs have no suffix, but not universal, and only work for Wi-Fi 6.
Since the corresponding HW scan struct/func of Wi-Fi 7 have suffix "_be",
to avoid misunderstanding and improve readability, also add suffix "_ax"
to these Wi-Fi 6 stuffs.
(No logic is changed.)
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-4-pkshih@realtek.com
|
|
A new ACPI table entry format for TAS is defined, which includes
a "specific country" field. In this field, determine which
country can enable TAS.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-3-pkshih@realtek.com
|
|
Intermittent beacon loss from specific AP triggers disconnection
and reconnection. Increasing the beacon loss count will make the
connection more stable.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-2-pkshih@realtek.com
|
|
Pre-calculated antenna matrices can improve 160MHz uplink OFDMA
performance, but they are only needed for the HE trigger frame.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250416081241.36138-5-pkshih@realtek.com
|
|
Before adopting regd_UK TX power settings, some certifications are needed
and might be platform-level. Without that, should adopt regd_ETSI TX power
settings. But for now, there is no way to inform driver of it yet. So, add
a flag first. But for now, comprehensively use regd_ETSI TX power settings
to restrict regd_UK.
Plan to define an ACPI DSM function to inform driver whether to use regd_UK
own TX power settings or not afterwards.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250416081241.36138-4-pkshih@realtek.com
|
|
An incorrect Voltage Controlled Oscillator (VCO) setting
may cause Synthesizer (SYN) unlock, which may lead to a
failure in the TX authentication request.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250416081241.36138-3-pkshih@realtek.com
|
|
After firmware 0.27.125.0, it adds more fields to support firmware secure
boot. Though current driver has supported the format, old driver can't
recognize the new format, increase firmware format to 2 to avoid failed
to load the firmware by old driver.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250416081241.36138-2-pkshih@realtek.com
|
|
This reverts commit b6abf63ed7719f6dc1f7e36375b970126e29e709.
This is causing major merge conflicts with the changes in
wireless, where we reverted some changes. Revert this for
now to avoid having to solve that problem. We can redo it
on top of wireless-next with wireless merged back later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
phy_filters holds the values as read from WFPC BIOS table.
Since also iwlmld is going to need it, move it to fw_runtime.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250424153620.357baa65950a.I01d22328b4c381d4c0064ad9bd36750911157f90@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
rxq->read is accessed without the rxq->lock in a few places,
Make sure to have the lock there.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Tested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250424153620.73725f207aaa.I1a3e4b6c5fd370e029fdacfcdc9ee335788afa98@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This version has a new flag bit that indicates whether or not SMPS is
allowed for the MAC.
This only adds the API, the actual support will be done in other
patches.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250424153620.991ff01b8d16.Id0aa4061d7926753b03a13bf94ec1ac9e1d18745@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The IWL_DEV_INFO() macro has far too many arguments, and most
of the time they're just "ANY". Use C99 initializers in the
macro to clean that up.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.877b65b940b5.Ic3a40afcd182b6e1802bb8f8a1a845b20608e328@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Move some code that's only done when having received data out
of iwl_mld_rx_fill_status() and remove the two arguments that
are related to that. This simplifies the function for the no-
data case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.77010d6a6694.I2fd06b073460717d324245482110cb0381218526@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's no need to have the channel in phy_data, this
code only supports one descriptor format so can use
it directly from there.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250424153620.409c2f4ecbcc.I1735cd773ed07ad9fae44bdfc46261fa9a8fd0e0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use u8_get_bits() instead of open-coding, and adjust the
name as well. Also don't use enum nl80211_band for the
variable holding an entirely different type.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.c41058510800.Ic3f16ce2f0c991fde2cfe7bcd58ee3b875575fce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The firmware statistics were previously reporting bogus/old
channel load values if the device hadn't been active on a
given channel; it'll report an unknown value now for those
statistics affected (channel_load and channel_load_not_by_us.)
Handle that by simply skipping the value, the averaging would
result in the exact same value as before.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.db5410318642.I4d2981f68b915ad335bb02c926e9289c2a60ea6c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The firmware will support external FSEQ images, define the
necessary API for that. We're not yet using/shipping such,
so don't add code to load them for now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.4f5acc3dff6c.Ic559d90376945c78495352a0d24b1d44ef887f2d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If there are two links on 5 GHz subbands that are separated
enough (using channels 36-64 and 100+) then we can support
EMLSR across those two links. Allow that in the logic.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.d568a26661d5.Ie4277945272c5bbf637957704fda34ea03ef28d2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We can use this helper now to simplify some code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.586e12d3d07c.Idc27c446d00a7f7925ee76b356f53b72dafc5745@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The return type of iwl_mld_emlsr_disallowed_with_link() is a u32
bitmap of exit reasons, but in the data structure confusion case
where the warning triggers, it returns false. Add a new reason
bit for this case so it doesn't return that EMLSR is possible.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.d1f8465e2b5e.I58c463c70801231a79b04c1ff600f41afcbb04f5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In iwl_mld_emlsr_disallowed_with_link() the code uses an
enum for a bitmap of values from it, which doesn't really
make sense.Use u32 for the variable just like the return
value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.ddf54a728ec0.Ie2e8de150f67369c4e034452c5f1a15f85d2931c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add the proper case in the MSI interrupt handler and read the non-MSIx
interrupt cause register in case of timeout.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.758cdfbb78dc.Ia359071e6148218c26f18e783a8130c681d77df7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Setting tsf is meaningless if beacon is disabled, so check that beacon
is enabled before setting tsf.
Reported-by: syzbot+064815c6cd721082a52a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=064815c6cd721082a52a
Tested-by: syzbot+064815c6cd721082a52a@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://patch.msgid.link/tencent_3609AC2EFAAED68CA5A7E3C6D212D1C67806@qq.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath into wireless-next
Jeff Johnson says:
====================
ath.git patches for v6.16
ath12k:
Enable AHB support for IPQ5332.
Add monitor interface support to QCN9274.
Add MLO support to WCN7850.
Add 802.11d scan offload support to WCN7850.
ath11k:
Restore hibernation support
In addition, perform the usual set of bug fixes and cleanups across
all supported drivers.
====================
Change-Id: I6555e64d7434f3a5fed5faab25057be93106b18e
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Some more fixes, notably:
* iwlwifi: various regression and iwlmld fixes
* mac80211: fix TX frames in monitor mode
* brcmfmac: error handling for firmware load
* tag 'wireless-2025-04-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: restore missing initialization of async_handlers_list
wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage()
wifi: plfxlc: Remove erroneous assert in plfxlc_mac_release
wifi: iwlwifi: fix the check for the SCRATCH register upon resume
wifi: iwlwifi: don't warn if the NIC is gone in resume
wifi: iwlwifi: mld: fix BAID validity check
wifi: iwlwifi: back off on continuous errors
wifi: iwlwifi: mld: only create debugfs symlink if it does not exist
wifi: iwlwifi: mld: inform trans on init failure
wifi: iwlwifi: mld: properly handle async notification in op mode start
Revert "wifi: iwlwifi: make no_160 more generic"
Revert "wifi: iwlwifi: add support for BE213"
wifi: mac80211: restore monitor for outgoing frames
====================
Link: https://patch.msgid.link/20250424120535.56499-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For MBSSID, each vif (struct ieee80211_vif) stores another vif
pointer for the transmitting profile of MBSSID set. This won't
suffice for MLO as there may be multiple links, each of which can
be part of different MBSSID sets. Hence the information needs to
be stored per-link. Additionally, the transmitted profile itself
may be part of an MLD hence storing vif will not suffice either.
Fix MLO by storing an instance of struct ieee80211_bss_conf
for each link.
Modify following operations to reflect the above structure updates:
- channel switch completion
- BSS color change completion
- Removing nontransmitted links in ieee80211_stop_mbssid()
- drivers retrieving the transmitted link for beacon templates.
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408184501.3715887-3-aloka.dixit@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The init argument from mwifiex_sta_init_cmd() is no longer used. Drop
it.
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20250423-mwifiex-drop-asynchronous-init-v2-4-1bb951073a06@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Historically all commands sent to the mwifiex driver have been
asynchronous. The different commands sent during driver initialization
have been queued at once and only the final command has been waited
for being ready before finally starting the driver.
This has been changed in Commit 7bff9c974e1a ("mwifiex: send firmware
initialization commands synchronously"). With this the initialization
is finished once the last mwifiex_send_cmd_sync() (now
mwifiex_send_cmd()) has returned. This makes all the code used to
wait for the last initialization command to be finished unnecessary,
so it's removed in this patch.
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20250423-mwifiex-drop-asynchronous-init-v2-3-1bb951073a06@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mwifiex_sta_init_cmd() returns -EINPROGRESS as success indication when
the init param is true. Likewise mwifiex_init_fw() returns -EINPROGRESS
as success indication: It will either return -EINPROGRESS directly when
in mfg_mode or the return value of mwifiex_sta_init_cmd() when in normal
mode.
-EINPROGRESS is a leftover from times when the initialization commands
were sent asynchronously. Since Commit 7bff9c974e1a ("mwifiex: send
firmware initialization commands synchronously") the return value has
become meaningless, so change mwifiex_sta_init_cmd() and
mwifiex_init_fw() to return 0 for success.
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20250423-mwifiex-drop-asynchronous-init-v2-2-1bb951073a06@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since Commit 7bff9c974e1a ("mwifiex: send firmware initialization commands
synchronously") all initialization commands are sent synchronously which
means the command queue is empty when mwifiex_sta_init_cmd() returns. No
need to check for entries in the command code then, so remove the check.
Add a WARN_ON() just in case there is something wrong with the
reasoning.
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20250423-mwifiex-drop-asynchronous-init-v2-1-1bb951073a06@pengutronix.de
[remove now unused is_cmd_pend_q_empty variable and comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This has nothing to do with the opmode. Set it in the transport layer
instead.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Tested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250423091408.4e288f7897be.I0c8f792ea2ed6967f8c6d8181f9c5f74bbec7d18@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We can use le32_encode_bits() instead of cpu_to_le32()
combined with FIELD_PREP().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250423091408.9155a412dcc7.I8330ca413d6bdf953e79361ac50939176bcc4e6e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
A new field is added, no impact on the current flows.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250423091408.0e1324ae07b7.I6d8ffda2b00c817d3f784241dd61cfe533e12d93@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If starting the op mode failed, the opmode memory is being freed,
so trans->op_mode needs to be NULLified. Otherwise, trans will access
already freed memory.
Call iwl_trans_op_mode_leave in that case.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250423091408.c7e178748ef7.Ifaf15bdd8ef8c59e04effbd2e7aa0034b30eeacb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
From the moment that we have ALIVE, we can receive notification that
are handled asynchronously.
Some notifications (for example iwl_rfi_support_notif) requires an
operational FW. So we need to make sure that they were handled in
iwl_op_mode_mld_start before we stop the FW. Flush the async_handlers_wk
there to achieve that.
Also, if loading the FW in op mode start failed, we need to cancel
these notifications, as they are from a dead FW.
More than that, not doing so can cause us to access freed memory
if async_handlers_wk is executed after ieee80211_free_hw is called.
Fix this by canceling all async notifications if a failure occurred in
init (after ALIVE).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250423091408.a8f63d983466.Ifd77d9c1a29fdd278b0a7bfc2709dd5d5e5efdb1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
To cancel all async notifications, we need to:
- cancel async_handlers_wk
- empty async_handlers_list
Instead of having the callers to do both, do it in
iwl_mld_purge_async_handlers_list and rename it accordingly.
Note that the caller iwl_cleanup_mld didn't cancel the work, but it is
harmless.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250423091408.e98aed77e836.Id9f858d9d553d406a24165b09db830df111befce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
