summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2023-04-20wifi: iwlwifi: Update support for b0 versionMukesh Sisodiya
Add support for B0 version of MAC of MR device Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230418122405.5dca1ea7a0cf.I87932e1e216a1940eeae8824071ecb777f4c034f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-19Revert "net/mlx5: Enable management PF initialization"Jakub Kicinski
This reverts commit fe998a3c77b9f989a30a2a01fb00d3729a6d53a4. Paul reports that it causes a regression with IB on CX4 and FW 12.18.1000. In addition I think that the concept of "management PF" is not fully accepted and requires a discussion. Fixes: fe998a3c77b9 ("net/mlx5: Enable management PF initialization") Reported-by: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/all/CAHC9VhQ7A4+msL38WpbOMYjAqLp0EtOjeLh4Dc6SQtD6OUvCQg@mail.gmail.com/ Link: https://lore.kernel.org/r/20230413222547.56901-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19net: micrel: Update the list of supported physHoratiu Vultur
At the beginning of the file micrel.c there is list of supported PHYs. Extend this list with the following PHYs lan8841, lan8814 and lan8804, as these PHYs were added but the list was not updated. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230418124713.2221451-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19net: stmmac: dwmac-meson8b: Avoid cast to incompatible function typeSimon Horman
Rather than casting clk_disable_unprepare to an incompatible function type provide a trivial wrapper with the correct signature for the use-case. Reported by clang-16 with W=1: drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c:276:6: error: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] (void(*)(void *))clk_disable_unprepare, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ No functional change intended. Compile tested only. Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20230418-dwmac-meson8b-clk-cb-cast-v1-1-e892b670cbbb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== bpf 2023-04-19 We've added 3 non-merge commits during the last 6 day(s) which contain a total of 3 files changed, 34 insertions(+), 9 deletions(-). The main changes are: 1) Fix a crash on s390's bpf_arch_text_poke() under a NULL new_addr, from Ilya Leoshkevich. 2) Fix a bug in BPF verifier's precision tracker, from Daniel Borkmann and Andrii Nakryiko. 3) Fix a regression in veth's xdp_features which led to a broken BPF CI selftest, from Lorenzo Bianconi. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Fix incorrect verifier pruning due to missing register precision taints veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL ==================== Link: https://lore.kernel.org/r/20230419195847.27060-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-04-17 (i40e) This series contains updates to i40e only. Alex moves setting of active filters to occur under lock and checks/takes error path in rebuild if re-initializing the misc interrupt vector failed. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: fix i40e_setup_misc_vector() error handling i40e: fix accessing vsi->active_filters without holding lock ==================== Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230417205245.1030733-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19e1000e: Disable TSO on i219-LM card to increase speedSebastian Basierski
While using i219-LM card currently it was only possible to achieve about 60% of maximum speed due to regression introduced in Linux 5.8. This was caused by TSO not being disabled by default despite commit f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround"). Fix that by disabling TSO during driver probe. Fixes: f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround") Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230417205345.1030801-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19bnxt_en: fix free-runnig PHC modeVadim Fedorenko
The patch in fixes changed the way real-time mode is chosen for PHC on the NIC. Apparently there is one more use case of the check outside of ptp part of the driver which was not converted to the new macro and is making a lot of noise in free-running mode. Fixes: 131db4991622 ("bnxt_en: reset PHC frequency in free-running mode") Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230418202511.1544735-1-vadfed@meta.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19net: dsa: mt7530: fix support for MT7531BEDaniel Golle
There are two variants of the MT7531 switch IC which got different features (and pins) regarding port 5: * MT7531AE: SGMII/1000Base-X/2500Base-X SerDes PCS * MT7531BE: RGMII Moving the creation of the SerDes PCS from mt753x_setup to mt7530_probe with commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation to mt7530_probe function") works fine for MT7531AE which got two instances of mtk-pcs-lynxi, however, MT7531BE requires mt7531_pll_setup to setup clocks before the single PCS on port 6 (usually used as CPU port) starts to work and hence the PCS creation failed on MT7531BE. Fix this by introducing a pointer to mt7531_create_sgmii function in struct mt7530_priv and call it again at the end of mt753x_setup like it was before commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation to mt7530_probe function"). Fixes: 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation to mt7530_probe function") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/ZDvlLhhqheobUvOK@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19net: dsa: microchip: ksz8795: Correctly handle huge frame configurationChristophe JAILLET
Because of the logic in place, SW_HUGE_PACKET can never be set. (If the first condition is true, then the 2nd one is also true, but is not executed) Change the logic and update each bit individually. Fixes: 29d1e85f45e0 ("net: dsa: microchip: ksz8: add MTU configuration support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/43107d9e8b5b8b05f0cbd4e1f47a2bb88c8747b2.1681755535.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19wifi: ath11k: Remove disabling of 80+80 and 160 MHzMuna Sinada
This is a regression fix for 80+80 and 160 MHz support bits being cleared, therefore not adverised. Remove disable of 80+80 and 160 MHz capability flags and assign valid center frequency 2 similar to VHT80_80. Fixes: 38dfe775d0ab ("wifi: ath11k: push MU-MIMO params from hostapd to hardware") Reported-by: Robert Marko <robert.marko@sartura.hr> Tested-by: Robert Marko <robert.marko@sartura.hr> # IPQ8074 WLAN.HK.2.9.0.1-01385-QCAHKSWPL_SILICONZ-1 Link: https://bugzilla.kernel.org/show_bug.cgi?id=217299 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1681762947-13882-1-git-send-email-quic_msinada@quicinc.com
2023-04-19wifi: ath9k: Don't mark channelmap stack variable read-only in ↵Toke Høiland-Jørgensen
ath9k_mci_update_wlan_channels() This partially reverts commit e161d4b60ae3a5356e07202e0bfedb5fad82c6aa. Turns out the channelmap variable is not actually read-only, it's modified through the MCI_GPM_CLR_CHANNEL_BIT() macro further down in the function, so making it read-only causes page faults when that code is hit. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217183 Fixes: e161d4b60ae3 ("wifi: ath9k: Make arrays prof_prio and channelmap static const") Cc: stable@vger.kernel.org Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230413214118.153781-1-toke@toke.dk
2023-04-19wifi: ath11k: Fix SKB corruption in REO destination ringNagarajan Maran
While running traffics for a long time, randomly an RX descriptor filled with value "0" from REO destination ring is received. This descriptor which is invalid causes the wrong SKB (SKB stored in the IDR lookup with buffer id "0") to be fetched which in turn causes SKB memory corruption issue and the same leads to crash after some time. Changed the start id for idr allocation to "1" and the buffer id "0" is reserved for error validation. Introduced Sanity check to validate the descriptor, before processing the SKB. Crash Signature : Unable to handle kernel paging request at virtual address 3f004900 PC points to "b15_dma_inv_range+0x30/0x50" LR points to "dma_cache_maint_page+0x8c/0x128". The Backtrace obtained is as follows: [<8031716c>] (b15_dma_inv_range) from [<80313a4c>] (dma_cache_maint_page+0x8c/0x128) [<80313a4c>] (dma_cache_maint_page) from [<80313b90>] (__dma_page_dev_to_cpu+0x28/0xcc) [<80313b90>] (__dma_page_dev_to_cpu) from [<7fb5dd68>] (ath11k_dp_process_rx+0x1e8/0x4a4 [ath11k]) [<7fb5dd68>] (ath11k_dp_process_rx [ath11k]) from [<7fb53c20>] (ath11k_dp_service_srng+0xb0/0x2ac [ath11k]) [<7fb53c20>] (ath11k_dp_service_srng [ath11k]) from [<7f67bba4>] (ath11k_pci_ext_grp_napi_poll+0x1c/0x78 [ath11k_pci]) [<7f67bba4>] (ath11k_pci_ext_grp_napi_poll [ath11k_pci]) from [<807d5cf4>] (__napi_poll+0x28/0xb8) [<807d5cf4>] (__napi_poll) from [<807d5f28>] (net_rx_action+0xf0/0x280) [<807d5f28>] (net_rx_action) from [<80302148>] (__do_softirq+0xd0/0x280) [<80302148>] (__do_softirq) from [<80320408>] (irq_exit+0x74/0xd4) [<80320408>] (irq_exit) from [<803638a4>] (__handle_domain_irq+0x90/0xb4) [<803638a4>] (__handle_domain_irq) from [<805bedec>] (gic_handle_irq+0x58/0x90) [<805bedec>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c) Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403191533.28114-1-quic_nmaran@quicinc.com
2023-04-19wifi: ath11k: Fix incorrect update of radiotap fieldsPradeep Kumar Chitrapu
Fix incorrect update of ppdu stats causing incorrect radiotap fields. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403195738.25367-3-quic_pradeepc@quicinc.com
2023-04-19wifi: ath11k: fix tx status reporting in encap offload modePradeep Kumar Chitrapu
ieee80211_tx_status() treats packets in 802.11 frame format and tries to extract sta address from packet header. When tx encap offload is enabled, this becomes invalid operation. Hence, switch to using ieee80211_tx_status_ext() after filling in station address for handling both 802.11 and 802.3 frames. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403195738.25367-2-quic_pradeepc@quicinc.com
2023-04-19wifi: ath11k: add peer mac information in failure casesHarshitha Prem
During reo command failure, the peer mac detail for which the reo command was not successful is unknown. Hence, to improve the debuggability, add the peer mac information in the failure cases which would be useful during multi client cases. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403182420.23375-4-quic_hprem@quicinc.com
2023-04-19wifi: ath11k: Prevent REO cmd failuresHarshitha Prem
Prevent REO cmd failures causing double free by increasing REO cmd ring size and moving REO status ring mask to IRQ group 3 from group 0 to separate from tx completion ring on IRQ group 0 which may delay reo status processing. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403182420.23375-3-quic_hprem@quicinc.com
2023-04-19wifi: ath11k: fix double free of peer rx_tid during reo cmd failureHarshitha Prem
Peer rx_tid is locally copied thrice during peer_rx_tid_cleanup to send REO_CMD_UPDATE_RX_QUEUE followed by REO_CMD_FLUSH_CACHE to flush all aged REO descriptors from HW cache. When sending REO_CMD_FLUSH_CACHE fails, we do dma unmap of already mapped rx_tid->vaddr and free it. This is not checked during reo_cmd_list_cleanup() and dp_reo_cmd_free() before trying to free and unmap again. Fix this by setting rx_tid->vaddr NULL in rx tid delete and also wherever freeing it to check in reo_cmd_list_cleanup() and reo_cmd_free() before trying to free again. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403182420.23375-2-quic_hprem@quicinc.com
2023-04-19stmmac: fix changing mac addressCorinna Vinschen
Without the IFF_LIVE_ADDR_CHANGE flag being set, the network code disallows changing the mac address while the interface is UP. Consequences are, for instance, that the interface can't be used in a failover bond. Add the missing flag to net_device priv_flags. Tested on Intel Elkhart Lake with default settings, as well as with failover and alb mode bonds. Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19hamradio: drop ISA_DMA_API dependencyArnd Bergmann
It looks like the dependency got added accidentally in commit a553260618d8 ("[PATCH] ISA DMA Kconfig fixes - part 3"). Unlike the previously removed dmascc driver, the scc driver never used DMA. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19mlxsw: pci: Fix possible crash during initializationIdo Schimmel
During initialization the driver issues a reset command via its command interface in order to remove previous configuration from the device. After issuing the reset, the driver waits for 200ms before polling on the "system_status" register using memory-mapped IO until the device reaches a ready state (0x5E). The wait is necessary because the reset command only triggers the reset, but the reset itself happens asynchronously. If the driver starts polling too soon, the read of the "system_status" register will never return and the system will crash [1]. The issue was discovered when the device was flashed with a development firmware version where the reset routine took longer to complete. The issue was fixed in the firmware, but it exposed the fact that the current wait time is borderline. Fix by increasing the wait time from 200ms to 400ms. With this patch and the buggy firmware version, the issue did not reproduce in 10 reboots whereas without the patch the issue is reproduced quite consistently. [1] mce: CPUs not responding to MCE broadcast (may include false positives): 0,4 mce: CPUs not responding to MCE broadcast (may include false positives): 0,4 Kernel panic - not syncing: Timeout: Not all CPUs entered broadcast exception handler Shutting down cpus with NMI Kernel Offset: 0x12000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: ac004e84164e ("mlxsw: pci: Wait longer before accessing the device after reset") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: phy: marvell: Implement led_blink_set()Andrew Lunn
The Marvell PHY can blink the LEDs, simple on/off. All LEDs blink at the same rate, and the reset default is 84ms per blink, which is around 12Hz. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: phy: phy_device: Call into the PHY driver to set LED blinkingAndrew Lunn
Linux LEDs can be requested to perform hardware accelerated blinking. Pass this to the PHY driver, if it implements the op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: phy: marvell: Add software control of the LEDsAndrew Lunn
Add a brightness function, so the LEDs can be controlled from software using the standard Linux LED infrastructure. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: phy: phy_device: Call into the PHY driver to set LED brightnessAndrew Lunn
Linux LEDs can be software controlled via the brightness file in /sys. LED drivers need to implement a brightness_set function which the core will call. Implement an intermediary in phy_device, which will call into the phy driver if it implements the necessary function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: phy: Add a binding for PHY LEDsAndrew Lunn
Define common binding parsing for all PHY drivers with LEDs using phylib. Parse the DT as part of the phy_probe and add LEDs to the linux LED class infrastructure. For the moment, provide a dummy brightness function, which will later be replaced with a call into the PHY driver. This allows testing since the LED core might otherwise reject an LED whose brightness cannot be set. Add a dependency on LED_CLASS. It either needs to be built in, or not enabled, since a modular build can result in linker errors. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: dsa: qca8k: add LEDs blink_set() supportChristian Marangi
Add LEDs blink_set() support to qca8k Switch Family. These LEDs support hw accellerated blinking at a fixed rate of 4Hz. Reject any other value since not supported by the LEDs switch. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: dsa: qca8k: add LEDs basic supportChristian Marangi
Add LEDs basic support for qca8k Switch Family by adding basic brightness_set() support. Since these LEDs refelect port status, the default label is set to ":port". DT binding should describe the color and function of the LEDs using standard LEDs api. Each LED always have the device name as prefix. The device name is composed from the mii bus id and the PHY addr resulting in example names like: - qca8k-0.0:00:amber:lan - qca8k-0.0:00:white:lan - qca8k-0.0:01:amber:lan - qca8k-0.0:01:white:lan These LEDs supports only blocking variant of the brightness_set() function since they can sleep during access of the switch leds to set the brightness. While at it add to the qca8k header file each mode defined by the Switch Documentation for future use. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: dsa: qca8k: move qca8k_port_to_phy() to headerChristian Marangi
Move qca8k_port_to_phy() to qca8k header as it's useful for future reference in Switch LEDs module since the same logic is applied to get the right index of the switch port. Make it inline as it's simple function that just decrease the port. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: wwan: Expose secondary AT port on DATA1Jaime Breva
Our use-case needs two AT ports available: One for running a ppp daemon, and another one for management This patch enables a second AT port on DATA1 Signed-off-by: Jaime Breva <jbreva@nayarsystems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19wifi: mt76: mt7996: fill txd by host driverRyder Lee
The hardware SDO has issue to fill txd for the moment, so fallback to driver filling method. Fixes: 98686cd21624 (wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices) Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: set NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 on supported driversFelix Fietkau
Drivers that do not generate IV/PN in software can safely rekey PTK0 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: dma: use napi_build_skbFelix Fietkau
Improves performance by using bulk allocation Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7615: increase eeprom size for mt7663Felix Fietkau
mt7663 efuse has 0x600 bytes instead of 0x400. Increase the size in order to fix issues with incomplete calibration data Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable mesh HW amsdu/de-amsdu supportRyder Lee
This enables HW offloading amsdu/de-amsdu support for 802.11s mesh interface. Co-developed-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable configured beacon tx rateRyder Lee
The user is allowed to change beacon tx rate (HT/VHT/HE) from hostapd. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable BSS_CHANGED_MCAST_RATE supportRyder Lee
Similar to BSS_CHANGED_BASIC_RATES, this enables mcast rate configuration through fixed rate tables. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Change-Id: Ifc305e8c7de9a7df4ad5f856e2097d721a886aaa Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES supportRyder Lee
The connac3 removes fixed rate fields to reduce txd size and introduces global rate tables (64 entries) for rate setting. Driver needs to fill the corresponding idx in MT_TXD6_TX_RATE while tx, and push mt76_rate into predifined table at bootup stage so that mvif->basic_rates_idx can immediately switch out once setting changes. spe_idx is also needed for fixed rate frames, and will be updated by future patches. Note that all table entries are shared across driver and firmware (i.e.TxBF), hence adding MT7996_BASIC_RATES_TBL to reflect mapping status. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()Seiji Nishikawa
When vmxnet3_rq_create() fails to allocate rq->data_ring.base due to page allocation failure, subsequent call to vmxnet3_rq_rx_complete() can result in NULL pointer dereference. To fix this bug, check not only that rxDataRingUsed is true but also that adapter->rxdataring_enabled is true before calling memcpy() in vmxnet3_rq_rx_complete(). [1728352.477993] ethtool: page allocation failure: order:9, mode:0x6000c0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0 ... [1728352.478009] Call Trace: [1728352.478028] dump_stack+0x41/0x60 [1728352.478035] warn_alloc.cold.120+0x7b/0x11b [1728352.478038] ? _cond_resched+0x15/0x30 [1728352.478042] ? __alloc_pages_direct_compact+0x15f/0x170 [1728352.478043] __alloc_pages_slowpath+0xcd3/0xd10 [1728352.478047] __alloc_pages_nodemask+0x2e2/0x320 [1728352.478049] __dma_direct_alloc_pages.constprop.25+0x8a/0x120 [1728352.478053] dma_direct_alloc+0x5a/0x2a0 [1728352.478056] vmxnet3_rq_create.part.57+0x17c/0x1f0 [vmxnet3] ... [1728352.478188] vmxnet3 0000:0b:00.0 ens192: rx data ring will be disabled ... [1728352.515347] BUG: unable to handle kernel NULL pointer dereference at 0000000000000034 ... [1728352.515440] RIP: 0010:memcpy_orig+0x54/0x130 ... [1728352.515655] Call Trace: [1728352.515665] <IRQ> [1728352.515672] vmxnet3_rq_rx_complete+0x419/0xef0 [vmxnet3] [1728352.515690] vmxnet3_poll_rx_only+0x31/0xa0 [vmxnet3] ... Signed-off-by: Seiji Nishikawa <snishika@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: RX, Add XDP multi-buffer support in Striding RQTariq Toukan
Here we add support for multi-buffer XDP handling in Striding RQ, which is our default out-of-the-box RQ type. Before this series, loading such an XDP program would fail, until you switch to the legacy RQ (by unsetting the rx_striding_rq priv-flag). To overcome the lack of headroom and tailroom between the strides, we allocate a side page to be used for the descriptor (xdp_buff / skb) and the linear part. When an XDP program is attached, we structure the xdp_buff so that it contains no data in the linear part, and the whole packet resides in the fragments. In case of XDP_PASS, where an SKB still needs to be created, we copy up to 256 bytes to its linear part, to match the current behavior, and satisfy functions that assume finding the packet headers in the SKB linear part (like eth_type_trans). Performance testing: Packet rate test, 64 bytes, 32 channels, MTU 9000 bytes. CPU: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz. NIC: ConnectX-6 Dx, at 100 Gbps. +----------+-------------+-------------+---------+ | Test | Legacy RQ | Striding RQ | Speedup | +----------+-------------+-------------+---------+ | XDP_DROP | 101,615,544 | 117,191,020 | +15% | +----------+-------------+-------------+---------+ | XDP_TX | 95,608,169 | 117,043,422 | +22% | +----------+-------------+-------------+---------+ Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: RX, Prepare non-linear striding RQ for XDP multi-buffer supportTariq Toukan
In preparation for supporting XDP multi-buffer in striding RQ, use xdp_buff struct to describe the packet. Make its skb_shared_info collide the one of the allocated SKB, then add the fragments using the xdp_buff API. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: RX, Generalize mlx5e_fill_mxbuf()Tariq Toukan
Make the function more generic. Let it get an additional frame_sz parameter instead of deriving it from the RQ struct. No functional change here, just a preparation for a downstream patch. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: RX, Take shared info fragment addition into a functionTariq Toukan
Introduce mlx5e_add_skb_shared_info_frag(), a function dedicated for adding a fragment into a struct skb_shared_info object. Use it in the Legacy RQ flow. Similar usage will be added in a downstream patch by the corresponding Striding RQ flow. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: XDP, Allow non-linear single-segment frames in XDP TX MPWQETariq Toukan
Under a few restrictions, TX MPWQE feature can serve multiple TX packets in a single TX descriptor. It requires each of the packets to have a single scatter entry / segment. Today we allow only linear frames to use this feature, although there's no real problem with non-linear ones where the whole packet reside in the first fragment. Expand the XDP TX MPWQE feature support to include such frames. This is in preparation for the downstream patch, in which we will generate such non-linear frames. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: XDP, Remove un-established assumptions on XDP bufferTariq Toukan
Remove the assumption of non-zero linear length in the XDP xmit function, used to serve both internal XDP_TX operations as well as redirected-in requests. Do not apply the MLX5E_XDP_MIN_INLINE check unless necessary. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: XDP, Consider large muti-buffer packets in Striding RQ params ↵Tariq Toukan
calculations Function mlx5e_rx_get_linear_stride_sz() returns PAGE_SIZE immediately in case an XDP program is attached. The more accurate formula is ALIGN(sz, PAGE_SIZE), to prevent two packets from residing on the same page. The assumption behind the current code is that sz <= PAGE_SIZE holds for all cases with XDP program set. This is true because it is being called from: - 3 times from Striding RQ flows, in which XDP is not supported for such large packets. - 1 time from Legacy RQ flow, under the condition mlx5e_rx_is_linear_skb(). No functional change here, just removing the implied assumption in preparation for supporting XDP multi-buffer in Striding RQ. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: XDP, Let XDP checker function get the params as inputTariq Toukan
Change mlx5e_xdp_allowed() so it gets the params structure with the xdp_prog applied, rather than creating a local copy based on the current params in priv. This reduces the amount of memory on the stack, and acts on the exact params instance that's about to be applied. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: XDP, Improve Striding RQ check with XDPTariq Toukan
Non-linear mem scheme of Striding RQ does not yet support XDP at this point. Take the check where it belongs, inside the params validation function mlx5e_params_validate_xdp(). Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: XDP, Add support for multi-buffer XDP redirect-inTariq Toukan
Handle multi-buffer XDP redirect-in requests coming through mlx5e_xdp_xmit. Extend struct mlx5e_xmit_data_frags with an additional dma_arr field, to point to the fragments dma mapping, as they cannot be retrieved via the page_pool_get_dma_addr() function. Push a dma_addr xdpi instance per each fragment, and use them in the completion flow to dma_unmap the frags. Finally, remove the restriction in mlx5e_open_xdpsq, and set the flag in xdp_features. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: XDP, Use multiple single-entry objects in xdpi_fifoTariq Toukan
Here we fix the current wi->num_pkts abuse, as it was used to indicate multiple xdpi entries in the xdpi_fifo. Instead, reduce mlx5e_xdp_info to the size of a single field, making it a union of unions. Per packet, use as many instances as needed to provide the information needed at the time of completion. The sequence of xdpi instances pushed is well defined, derived by the xmit_mode. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-18 12:46:53 +0000