| Age | Commit message (Collapse) | Author |
|---|
|
Add support for .set_module_eeprom_by_page() callback
which implements generic solution for modules eeprom access.
This implementation also supports CMIS 5.0.3 compliant
eeprom FW download.
Sample Usage:
ethtool --flash-module-firmware enp177s0np0 file dummy.bin
Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-8-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In preparation for adding .set_module_eeprom_by_page(), extract the
common error checking done in bnxt_get_module_eeprom_by_page() into
a new common function that can be re-used for
.set_module_eeprom_by_page().
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-7-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The main changes are adding i2c write for module eeprom and a new v2
PCIe statistics structure.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-6-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Newer FW can set the CAPS_CHANGE flag during ifup if some capabilities
or configurations have changed. For example, the CoS queue
configurations may have changed. Support this new flag by treating it
almost like FW reset. The driver will essentially rediscover all
features and capabilities, reconfigure all backing store context memory,
reset everything to default, and reserve all resources.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: shantiprasad shettar <shantiprasad.shettar@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-5-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add set/show support for the ENABLE_ROCE NVM parameter to
enable/disable RoCE for a PF.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Co-developed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-4-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
bnxt_hwrm_nvm_req() first searches the nvm_params[] array for the
NVM parameter to set or get. The array entry contains all the
NVM information about that parameter. The information is then used
to send the FW message to set or get the parameter.
Refactor it to only do the array search in bnxt_hwrm_nvm_req() and
pass the array entry to the new function __bnxt_hwrm_nvm_req() to
send the FW message. The next patch will be able to use the new
function.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-3-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When doing a live coredump with ethtool -w, the context data cached
in the NIC is not dumped by the FW by default. The reason is that
retrieving this cached context data with traffic running may cause
problems. Add a new dump flag 3 to allow the option to include this
cached context data which may be useful in some debug scenarios.
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Vasuthevan Maheswaran <vasuthevan.maheswaran@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-2-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
E610 NICs unlike the previous devices utilising ixgbe driver
are notified in the case of overheating by the FW ACI event.
In event of overheat when threshold is exceeded, FW suspends all
traffic and sends overtemp event to the driver. Then driver
logs appropriate message and disables the adapter instance.
The card remains in that state until the platform is rebooted.
This approach is a solution to the fact current version of the
E610 FW doesn't support reading thermal sensor data by the
SW. So give to user at least any info that overtemp event
has occurred, without interface disappearing from the OS
without any note.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Jeremiah Lokan <jeremiahx.j.lokan@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-7-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add PTP support for E610 adapter. The E610 is based on X550 and adds
firmware managed link, enhanced security capabilities and support for
updated server manageability. It does not introduce any new PTP features
compared to X550.
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-6-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Minor PTP register refactor, including logical grouping E825C 1-step
timestamping registers. Remove unused register definitions
(PHY_REG_GPCS_BITSLIP, PHY_REG_REVISION).
Also, apply preferred GENMASK macro (instead of ICE_M) for register
fields definition affected by this patch.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-5-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Simplify ice_phy_reg_info_eth56g struct definition to include base
address for the very first quad. Use base address info and 'step'
value to determine address for specific PHY quad.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-4-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Refactor the code by changing ice_ptp_init_phc_eth56g function
name to ice_ptp_init_phc_e825, to be consistent with the naming pattern
for other devices.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-3-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
E830 supports raw receive and generic transmit checksum offloads.
Raw receive checksum support is provided by hardware calculating the
checksum over the whole packet, regardless of type. The calculated
checksum is provided to driver in the Rx flex descriptor. Then the driver
assigns the checksum to skb->csum and sets skb->ip_summed to
CHECKSUM_COMPLETE.
Generic transmit checksum support is provided by hardware calculating the
checksum given two offsets: the start offset to begin checksum calculation,
and the offset to insert the calculated checksum in the packet. Support is
advertised to the stack using NETIF_F_HW_CSUM feature.
E830 has the following limitations when both generic transmit checksum
offload and TCP Segmentation Offload (TSO) are enabled:
1. Inner packet header modification is not supported. This restriction
includes the inability to alter TCP flags, such as the push flag. As a
result, this limitation can impact the receiver's ability to coalesce
packets, potentially degrading network throughput.
2. The Maximum Segment Size (MSS) is limited to 1023 bytes, which prevents
support of Maximum Transmission Unit (MTU) greater than 1063 bytes.
Therefore NETIF_F_HW_CSUM and NETIF_F_ALL_TSO features are mutually
exclusive. NETIF_F_HW_CSUM hardware feature support is indicated but is not
enabled by default. Instead, IP checksums and NETIF_F_ALL_TSO are the
defaults. Enforcement of mutual exclusivity of NETIF_F_HW_CSUM and
NETIF_F_ALL_TSO is done in ice_set_features(). Mutual exclusivity
of IP checksums and NETIF_F_HW_CSUM is handled by netdev_fix_features().
When NETIF_F_HW_CSUM is requested the provided skb->csum_start and
skb->csum_offset are passed to hardware in the Tx context descriptor
generic checksum (GCS) parameters. Hardware calculates the 1's complement
from skb->csum_start to the end of the packet, and inserts the result in
the packet at skb->csum_offset.
Co-developed-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Co-developed-by: Eric Joyner <eric.joyner@intel.com>
Signed-off-by: Eric Joyner <eric.joyner@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-2-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently iwlmld_kunit_add_chanctx receives a band, picks a predefined
static chandef, and creates the chanctx from it.
Change it to receive a bandwidth as well. Otherwise, the bandwidth in
the chanctx/phy will be different than what test specified in the
iwl_mld_kunit_link.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.85a1285d34cd.Ia71cdcd4241fe73501bc93e3cb2c6bb3f631b9ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
To allow setting up association/EMLSR states with more flexibility,
change the relevant functions to receive a new struct, iwl_mld_kunit_link,
which will contain all the link parameters (for now just link id, band
and bandwidth).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.f336491ccc4e.I6b727765eb394a3dbb78cea71e356be1bdc4a17c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Allow EMLSR if the bandwidths of the links are unequal if one of the
following conditions is true:
1. in low latency mode
2. bandwidth of the secondary link is greater than the bandwidth of the
primary
3. the primary link is active and is loaded enough to justify EMLSR
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.150c330711c4.Ifd72d2e076783991852a7f1756948b4f0efb9fea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We exit EMLSR mode if the FW requested to do so.
To prevent repeated toggling of the EMLSR mode (frequent entry and
exit), add this exit reason to the EMLSR prevention mechanism.
This mechanism avoids re-entering EMLSR for a certain period of time
after multiple exits caused by the same reason.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.f0e74a7f99af.I447c8788afba85a2a5040ae2c1213b6e05ec14f3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The channel load logic moves from the FW to the driver.
- Implement the logic: allow EMLSR only if the candidate primary link is
active and if its average channel load exceeds the threshold.
- Remove IWL_MLD_EMLSR_BLOCKED_FW. Instead, treat ESR_RECOMMEND_LEAVE in
the EMLSR_RECOMMENDATION notif as an EXIT reason.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.6729a8d67815.Iab39bf0982d8cdbb0db701d31854101c2fcf3b64@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add debugfs file in mld to retrieve TAS status per radio, TAS block list,
current mcc, OEM name and OEM allowed list. This will add ability to get
TAS status to user application via debugfs and required for debugging.
Add the required API definitions and some debug host command utils.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250313002008.66524c6ea198.I1625135284fc075148a55dd9ac629e94ca881fe4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The WIPHY_DEBUGFS_READ_WRITE_FILE_OPS_MLD macro is intended to call
read/write handlers with the wiphy lock held. However, the current
implementation uses the MLD_DEBUGFS_READ_WRAPPER macro, which does
not hold the wiphy lock during read operations. This fix updates
the WIPHY_DEBUGFS_READ_WRITE_FILE_OPS_MLD macro to use the
WIPHY_DEBUGFS_READ_WRAPPER_MLD macro instead, ensuring that the
wiphy lock is held during both read and write operations.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250313002008.2001d2335e9d.I607a8bd12efc6d1190cef1fca44279dbdd2756ea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Introduced the WIPHY_DEBUGFS_READ_FILE_OPS_MLD macro to enable reading
data from the driver while holding the wiphy lock.
This will enable read operations with wiphy locked.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250313002008.b0ddb6b0a144.I1fab63f2c6f52fea61cc5d7b27775aed58adfd8d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
WIPHY_DEBUGFS_WRITE_HANDLER_WRAPPER
Renamed the macro WIPHY_DEBUGFS_HANDLER_WRAPPER to
WIPHY_DEBUGFS_WRITE_HANDLER_WRAPPER to better reflect its purpose as a
write handler.
Additionally, updated the corresponding macro
WIPHY_DEBUGFS_HANDLER_WRAPPER_MLD to
WIPHY_DEBUGFS_WRITE_HANDLER_WRAPPER_MLD for consistency.
This change does not alter the functionality but enhances the
maintainability of the code.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250313002008.bb8a1d7907c8.I53325f2f37ccaad2b212d35d10616e06c1555e48@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are a few conflicts between the work that went
into wireless and that's here now, resolve them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Phylink has internal code to get the MAC capabilities of a given PHY
interface (what are the supported speed and duplex).
Extract that into phy_caps, but use the link_capa for conversion. Add an
internal phylink helper for the link caps -> mac caps conversion, and
use this in phylink_caps_to_linkmodes().
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-14-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
phylink_caps_to_linkmodes() is used to derive a list of linkmodes that
can be conceivably exposed using a given set of speeds and duplex
through phylink's MAC capabilities.
This list can be derived from the link_caps array in phy_caps, provided
we convert the MAC capabilities into a LINK_CAPA bitmask first.
Introduce an internal phylink helper phylink_caps_to_link_caps() to
convert from MAC capabilities into phy_caps, then phy_caps_linkmodes()
to do the link_caps -> linkmodes conversion.
This avoids having to update phylink for every new linkmode.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-13-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
phylink allows MAC drivers to report the capabilities in terms of speed,
duplex and pause support. This is done through a dedicated set of enum
values in the form of the MAC_ capabilities. They are very close to what
the LINK_CAPA_xxx can express, with the difference that LINK_CAPA don't
have any information about Pause/Asym Pause support.
To prepare converting phylink to using the phy_caps, add the mapping
between MAC capabilities and phy_caps. While doing so, we move the
phylink_caps_params array up a bit to simplify future commits.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-12-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The phy_settings array is no longer relevant as it has now been replaced
by the link_caps array and associated phy_caps helpers.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-11-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When phylink creates a fixed-link configuration, it finds a matching
linkmode to set as the advertised, lp_advertising and supported modes
based on the speed and duplex of the fixed link.
Use the newly introduced phy_caps_lookup to get these modes instead of
phy_lookup_settings(). This has the side effect that the matched
settings and configured linkmodes may now contain several linkmodes (the
intersection of supported linkmodes from the phylink settings and the
linkmodes that match speed/duplex) instead of the one from
phy_lookup_settings().
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-10-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When configuring PHY advertising with autoneg disabled, we lookd for an
exact linkmode to advertise and configure for the requested Speed and
Duplex, specially at or over 1G.
Using phy_caps_lookup allows us to build a list of the supported
linkmodes at that speed that we can advertise instead of the first mode
that matches.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-9-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As the link_caps array is efficient for <speed,duplex> lookups,
implement a function for speed/duplex lookups that matches a given
mask. This replicates to some extent the phy_lookup_settings()
behaviour, matching full link_capabilities instead of a single linkmode.
phy.c's phy_santize_settings() and phylink's
phylink_ethtool_ksettings_set() performs such lookup using the
phy_settings table, but are only interested in the actual speed/duplex
that were matched, rathet than the individual linkmode.
Similar to phy_lookup_settings(), the newly introduced phy_caps_lookup()
will run through the link_caps[] array by descending speed/duplex order.
If the link_capabilities for a given <speed/duplex> tuple intersects the
passed linkmodes, we consider that a match.
Similar to phy_lookup_settings(), we also allow passing an 'exact'
boolean, allowing non-exact match. Here, we MUST always match the
linkmodes mask, but we allow matching on lower speed settings.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-8-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In several occasions, phylib needs to lookup a set of matching speed and
duplex against a given linkmode set. Instead of relying on the
phy_settings array and thus iterate over the whole linkmodes list, use
the link_capabilities array to lookup these matches, as we aren't
interested in the actual link setting that matches but rather the speed
and duplex for that setting.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-7-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With the link_capabilities array, it's trivial to validate a given mask
againts a <speed, duplex> tuple. Create a helper for that purpose, and
use it to replace a phy_settings lookup in phy_check_valid();
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-6-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert the __set_linkmode_max_speed to use the link_capabilities array.
This makes it easy to clamp the linkmodes to a given max speed.
Introduce a new helper phy_caps_linkmode_max_speed to replace the
previous one that used phy_settings.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-5-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the newly introduced link_capabilities array to derive the list of
possible speeds when given a combination of linkmodes. As
link_capabilities is indexed by speed, we don't have to iterate the
whole phy_settings array.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-4-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The canonical definition for all the link modes is in linux/ethtool.h,
which is complemented by the link_mode_params array stored in
net/ethtool/common.h . That array contains all the metadata about each
of these modes, including the Speed and Duplex information.
Phylib and phylink needs that information as well for internal
management of the link, which was done by duplicating that information
in locally-stored arrays and lookup functions. This makes it easy for
developpers adding new modes to forget modifying phylib and phylink
accordingly.
However, the link_mode_params array in net/ethtool/common.c is fairly
inefficient to search through, as it isn't sorted in any manner. Phylib
and phylink perform a lot of lookup operations, mostly to filter modes
by speed and/or duplex.
We therefore introduce the link_caps private array in phy_caps.c, that
indexes linkmodes in a more efficient manner. Each element associated a
tuple <speed, duplex> to a bitfield of all the linkmodes runs at these
speed/duplex.
We end-up with an array that's fairly short, easily addressable and that
it optimised for the typical use-cases of phylib/phylink.
That array is initialized at the same time as phylib. As the
link_mode_params array is part of the net stack, which phylink depends
on, it should always be accessible from phylib.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-3-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
stmmac_release() calls phylink_stop() and then goes on to call
stmmac_mac_set(, false). However, phylink_stop() will call
stmmac_mac_link_down() before returning, which will do this work.
Remove this unnecessary call.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1trcI6-005rn8-GV@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
While the network device is registered, it is published to userspace,
and thus userspace can change its state. This means calling
functions such as stmmac_stop_all_dma() and stmmac_mac_set() are
racy.
Moreover, unregister_netdev() will unpublish the network device, and
then if appropriate call the .ndo_stop() method, which is
stmmac_release(). This will first call phylink_stop() which will
synchronously take the link down, resulting in stmmac_mac_link_down()
and stmmac_mac_set(, false) being called.
stmmac_release() will also call stmmac_stop_all_dma().
Consequently, neither of these two functions need to called prior
to unregister_netdev() as that will safely call paths that will
result in this work being done if necessary.
Remove these redundant racy calls.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1trcI1-005rn2-CZ@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Lenovo ThinkPad Hybrid USB-C with USB-A Dock (17ef:a359) is affected by
the same problem as the Lenovo Powered USB-C Travel Hub (17ef:721e):
Both are based on the Realtek RTL8153B chip used to use the cdc_ether
driver. However, using this driver, with the system suspended the device
constantly sends pause-frames as soon as the receive buffer fills up.
This causes issues with other devices, where some Ethernet switches stop
forwarding packets altogether.
Using the Realtek driver (r8152) fixes this issue. Pause frames are no
longer sent while the host system is suspended.
Cc: Leon Schuermann <leon@is.currently.online>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Oliver Neukum <oliver@neukum.org> (maintainer:USB CDC ETHERNET DRIVER)
Cc: netdev@vger.kernel.org (open list:NETWORKING DRIVERS)
Link: https://git.kernel.org/netdev/net/c/cb82a54904a9
Link: https://git.kernel.org/netdev/net/c/2284bbd0cf39
Link: https://www.lenovo.com/de/de/p/accessories-and-software/docking/docking-usb-docks/40af0135eu
Signed-off-by: Philipp Hahn <phahn-oss@avm.de>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/484336aad52d14ccf061b535bc19ef6396ef5120.1741601523.git.p.hahn@avm.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
intel_tsn_lane_is_available()
Fix the warning "warn: missing error code? 'ret'" in the
intel_tsn_lane_is_available() function.
The function now returns 0 to indicate that a TSN lane was found and
returns -EINVAL when it is not found.
Fixes: a42f6b3f1cc1 ("net: stmmac: configure SerDes according to the interface mode")
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250310050835.808870-1-yong.liang.choong@linux.intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
These functions have never had a user, so remove them.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/5792e2cd-6f0a-4f7d-a5ef-b932f94d82f3@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
phylib.h
These functions are used by PHY drivers only, therefore move their
declaration to phylib.h.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/406c8a20-b62e-4ee3-b174-b566724a0876@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for HW Steering action of flow sampler destination. For each
flow sampler created cache the hws action by sampler id as a key. Hold
refcount for each rule using the cached action.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1741543663-22123-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for HW Steering action of flow meter range. Flow meters
range can use one HWS action for the whole range. Thus, share a cached
HWS action among rules that use same flow meter object range. Hold
refcount for each rule using the cached action.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1741543663-22123-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Counters HWS actions are shared using refcount, to create action on
demand by flow steering rule and destroy only when no rules are using
the action. The method is extensible to other HWS action types, such as
flow meter and sampler actions, in the downstream patches.
Add an API to facilitate the reuse of get/put logic for HWS actions
shared by refcount.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1741543663-22123-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During system PM, if no wakeup requirement, disable transceiver to
save power.
Fixes: 4de349e786a3 ("can: flexcan: fix resume function")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20250314110145.899179-2-haibo.chen@nxp.com
[mkl: add newlines]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
After a suspend/resume cycle on a down interface, it will come up as
ERROR-ACTIVE.
$ ip -details -s -s a s dev flexcan0
3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10
link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
can state STOPPED (berr-counter tx 0 rx 0) restart-ms 1000
$ sudo systemctl suspend
$ ip -details -s -s a s dev flexcan0
3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10
link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
can state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 1000
And only set CAN state to CAN_STATE_ERROR_ACTIVE when resume process
has no issue, otherwise keep in CAN_STATE_SLEEPING as suspend did.
Fixes: 4de349e786a3 ("can: flexcan: fix resume function")
Cc: stable@vger.kernel.org
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20250314110145.899179-1-haibo.chen@nxp.com
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Closes: https://lore.kernel.org/all/20250314-married-polar-elephant-b15594-mkl@pengutronix.de
[mkl: add newlines]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
There are a total of 96 AFL pages and each page has 16 entries with
registers CFDGAFLIDr, CFDGAFLMr, CFDGAFLP0r, CFDGAFLP1r holding
the rule entries (r = 0..15).
Currently, RCANFD_GAFL* macros use a start variable to find AFL entries,
which is incorrect as the testing on RZ/G3E shows ch1 and ch4
gets a start value of 0 and the register contents are overwritten.
Fix this issue by using rule_entry corresponding to the channel
to find the page entries in the AFL list.
Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250307170330.173425-3-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Commit 7fdaf8966aae ("can: ucan: use strscpy() to instead of strncpy()")
unintentionally introduced a one byte out of bound read on strscpy()'s
source argument (which is kind of ironic knowing that strscpy() is meant
to be a more secure alternative :)).
Let's consider below buffers:
dest[len + 1]; /* will be NUL terminated */
src[len]; /* may not be NUL terminated */
When doing:
strncpy(dest, src, len);
dest[len] = '\0';
strncpy() will read up to len bytes from src.
On the other hand:
strscpy(dest, src, len + 1);
will read up to len + 1 bytes from src, that is to say, an out of bound
read of one byte will occur on src if it is not NUL terminated. Note
that the src[len] byte is never copied, but strscpy() still needs to
read it to check whether a truncation occurred or not.
This exact pattern happened in ucan.
The root cause is that the source is not NUL terminated. Instead of
doing a copy in a local buffer, directly NUL terminate it as soon as
usb_control_msg() returns. With this, the local firmware_str[] variable
can be removed.
On top of this do a couple refactors:
- ucan_ctl_payload->raw is only used for the firmware string, so
rename it to ucan_ctl_payload->fw_str and change its type from u8 to
char.
- ucan_device_request_in() is only used to retrieve the firmware
string, so rename it to ucan_get_fw_str() and refactor it to make it
directly handle all the string termination logic.
Reported-by: syzbot+d7d8c418e8317899e88c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-can/67b323a4.050a0220.173698.002b.GAE@google.com/
Fixes: 7fdaf8966aae ("can: ucan: use strscpy() to instead of strncpy()")
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250218143515.627682-2-mailhol.vincent@wanadoo.fr
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Currently the flexcan driver does only support adding PHYs by using the
"old" regulator bindings. Add support for CAN transceivers as a PHY. Add
the capability to ensure that the PHY is in operational state when the link
is set to an "up" state.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://patch.msgid.link/20250312-flexcan-add-transceiver-caps-v4-2-29e89ae0225a@liebherr.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
tools/testing/selftests/drivers/net/ping.py
75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py")
de94e8697405 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/
net/core/devmem.c
a70f891e0fa0 ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
1d22d3060b9b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/
Adjacent changes:
tools/testing/selftests/net/Makefile
6f50175ccad4 ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
2e5584e0f913 ("selftests/net: expand cmsg_ipv6.sh with ipv4")
drivers/net/ethernet/broadcom/bnxt/bnxt.c
661958552eda ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
